advertisement
Data sheet
Set and Inspect for Fanuc controls
Set and Inspect is a simple, intuitive, on-machine probing app for customers who require an easy-to-use probing solution.
Unlike traditional programming software, Set and Inspect is so easy to use that virtually no training is required: the software’s intuitive interface guides the user through the process of creating a probing cycle, automatically generates the required machine code for the probing cycle and loads it to the control; making it perfect for new users and those with limited probing experience or machine code knowledge.
Benefits
• Simple to use, highly visual display in an intuitive, easy-to-understand design
• No probing experience or machine code knowledge necessary
• Significantly reduces data entry errors
• Allows fast and accurate part set-up
• Supports part setting, inspection, and tool setting cycles
• Compatible with a range of 3-axis and 5-axis machine tools
• Choice of programming modes: use Single cycle to manually inspect individual features; use Program builder to generate an inspection program containing multiple features that can be embedded in other routines
Renishaw plc
New Mills, Wotton-under-Edge
Gloucestershire, GL12 8JR
United Kingdom
T +44 (0) 1453 524524
F +44 (0) 1453 524901
www.renishaw.com
Part number
Supported machine types
Hard disk requirements
A-5999-1200
Supported Fanuc controls 1 0 i -B/C/D, 16 i , 18 i , 30 i
0 i -F i , 15i , 21 i , 31 i , 32 i
Horizontal machining centres, vertical machining centres
App alone
.NET Framework
40 MB
Approximately 850 MB (32-bit controls); approximately 2 GB (64-bit controls)
Supported cycles: Single cycle
Part setting/inspection Measurement Single surface, bore, boss, pocket, web, corner (internal), corner (external), line, 3-point plane, 5-point rectangle
(internal), 5-point rectangle (external), 3-point bore, 3-point boss, 3D corner, rotary axis update
Contact tool setting
Calibration
Measurement
Calibration
Measurement
Traditional: XY, Z, XYZ, probe check
GoProbe: XY, Z, probe check
Length, length and diameter
Round stylus, square stylus
Non-contact tool setting Length, length and diameter, corner radius, broken tool, broken tool: solid tools, edge check, profile check
Beam alignment, beam calibration Calibration
Supported cycles: Program builder
Part setting/inspection Measurement Single surface, bore, boss, pocket, web, corner (internal), corner (external), line, 5-point rectangle (internal), 5-point rectangle (external), 3-point bore, 3-point boss, rotary axis updates
Macro prerequisites
Machining centres
Supported Renishaw probes
Supported languages
Inspection Plus
Contact tool setting
Non-contact tool setting
Spindle probes
Renishaw part no. A-4012-0516,
Renishaw part no. A-4012-0584 version 0V or later
Renishaw part no. A-4012-0820
MP700, OMP40-2, OMP60, OMP400, OMP600, RMP40,
RMP60, RMP600, OLP40, OLP60, RLP40, Primo Radio
Part Setter
OTS, RTS, TS27R, TS34, Primo Radio 3D Tool Setter Contact tool setters
Non-contact tool setters NC4
Czech, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian,
Simplified Chinese, Spanish, Swedish, Thai, Traditional Chinese, Turkish
1 Fanuc NC with FOCAS or FOCAS 2. Microsoft ® Windows ® -based PC; Windows ® XP, SP 3 or later: or tablet; Windows ® 8 or later.
Connection to the control is via Ethernet.
For other controls, please contact your local Fanuc office.
For worldwide contact details, visit www.renishaw.com/contact
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF
PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY,
HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.
© 2016–2017 Renishaw plc. All rights reserved.
Renishaw reserves the right to change specifications without notice.
RENISHAW and the probe symbol used in the RENISHAW logo are registered trade marks of Renishaw plc in the United Kingdom and other countries. apply innovation and names and designations of other Renishaw products and technologies are trade marks of Renishaw plc or its subsidiaries.
All other brand names and product names used in this document are trade names, trade marks or registered trade marks of their respective owners.
*H-5999-8220-03*
Part no.: H-5999-8220-03-B
Issued: 08.2017
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project