advertisement
▼
Scroll to page 2
Project Quantity Item # Model Specified: Roll-Thru Refrigerator Models For 66" High Racks/Self-Contained CSI Section 11400 One, Two & Three Section Models, 32" Deep R SERIES 1-Section Solid Door Model 2-Section Solid Door Model 3-Section Solid Door Model RRI132LPUT-FHS RRI232LPUT-FHS RRI332LPUT-FHS 1-Section Solid Door Model 2-Section Solid Door Model 3-Section Solid Door Model ARI132LPUT-FHS ARI232LPUT-FHS ARI332LPUT-FHS Stainless Exterior & Interior Includes Traulsen's patented INTELA-TRAUL® control A SERIES Stainless Exterior, Anodized Aluminum Interior The R & A Series represent Traulsen's Top-of-the-Line product offering. The “L-Height” roll-thru refrigerator models are all designed to offer convenient interior storage for 66" high racks. Each is supplied standard with such high quality features as easy to operate microprocessor controls, balanced refrigeration systems and stainless steel exteriors. Additionally, they offer the widest range of optional accessories to choose from, and can be specified for use with many different applications, including: Foodservice, Correctional, Institutional, Export, etc. Model RRI332LPUT-FHS Options & Accessories Standard Product Features • • • • • • • • • • • • • • • • • • • • • • • • • R-Series: Stainless Steel Exterior & Interior A-Series: Stainless Steel Exterior/Anodized Aluminum Interior INTELA-TRAUL® Microprocessor Control System Balanced, Self-Contained Refrigeration System Using R-134a Scroll Blower Type Evaporator Fan Biased Return Air Duct Full Length Stainless Steel Doors With Locks Self-Closing Doors With Stay Open Feature At 120 Degrees Guaranteed For Life Cam-Lift Hinges Guaranteed For Life Horizontal Work Flow Door Handle(s) Standard Door Hinging F & R: 132LP = Right, 232LP = Left/Right, 332LP = Left/Right/Right (other hingings available) Automatically Activated Incandescent Lights Stainless Steel Breaker Caps Accommodates Roll-In Racks Up To 66" High (provided by others) Automatic Non-Electric Condensate Evaporator Magnetic Snap-In Door Gaskets Gasket Protecting Metal Door Liner Controllable Anti-Condensate Door Perimeter Heaters Thermostatic Expansion Valve Metering Device Stainless Steel One-Piece Louver Assembly Stainless Steel Interior Rack Guides & Threshold Ramp(s) 9' Cord & Plug Attached One Year Parts And Labor Warranty Two Year Control Warranty (parts and labor) Five Year Compressor Warranty Listed by Underwriters Laboratories Inc., to U.S. and Canadian safety standards and Listed by NSF International. • Re-Hinging Feature For Door(s) • Wire Shelf Package For Roll-Thru Models (includes three wire shelves per section) • Additional Wire Shelves For Above • Stainless Steel Shelf Package For Roll-Thru Models (includes three stainless steel shelves per section) • Additional Stainless Steel Shelves For Above • Locking Hasps (padlocks supplied by others) • Export 220/50/1 Voltage • Glass Door(s) In Place Of One Or More Stainless Steel Door(s) (available on one or both sides, please note model number suffix will change to -FHG, n/a on three section models) • Kool Klad Exterior Laminate Decor • Remote Applications (see form TR35837 for more details) • Remote For Use With 20°F Glycol System • Recessed Installation • Prison/Correctional Facilities Options • Two Year Service/Labor Warranty Available Approval:___________________________________ TRAULSEN 4401 BLUE MOUND RD. PHONE 1 (800) 825-8220 Website: www.traulsen.com FT. WORTH, TX 76106 FAX-MKTG. 1 (817) 624-4302 Project Quantity Item # Model Specified: CSI Section 11400 Specifications Construction, Hardware and Insulation Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top and bottom are constructed of heavy gauge aluminized steel. The interior floor is constructed of stainless steel and insulated with 3⁄4" of resilient cork. Readily attachable stainless steel ramps are provided to facilitate loading/unloading. Doors are equipped with a heavy-duty, extruded wiper gasket for sealing to bottom ramp, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners. Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal. Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane. DIMENSIONAL DATA Net capacity cu. ft. Length - overall in. Depth - overall in. Depth - over body in. Depth - doors open 90° in. Clear door width in. Clear door height in. Height - overall in. RRI Net Wt. lbs. ARI Net Wt. lbs. Rack Capacity - 66" High ELECTRICAL DATA Voltage Feed wires with Ground Full load amperes REFRIGERATION DATA Refrigerant BTU/HR H.P.1 R/ARI132LPUT 38.8 (1099 cu l) 351⁄2 (90.2 cm) 391⁄8 (99.4 cm) 32 (81.3 cm) 941⁄2 (240.0 cm) 271⁄8 (68.8 cm) 665⁄16 (168.4 cm) 831⁄4 (211.5 cm) 490 (222 kg) 415 (188 kg) 1 R/ARI232LPUT 80.2 (2272 cu l) 68 (172.7 cm) 391⁄8 (99.4 cm) 32 (81.3 cm) 941⁄2 (240.0 cm) 271⁄8 (68.8 cm) 665⁄16 (168.4 cm) 831⁄4 (211.5 cm) 775 (352 kg) 670 (304 kg) 2 R/ARI332LPUT 117.5 (3329 cu l) 1001⁄2 (255.3 cm) 391⁄8 (99.4 cm) 32 (81.3 cm) 941⁄2 (240.0 cm) 271⁄8 (68.8 cm) 665⁄16 (168.4 cm) 831⁄4 (211.5 cm) 1050 (476 kg) 915 (415 kg) 3 115/60/1 3 11.6 115/60/1 3 13.4 115/60/1 3 15.2 R-134a 2220 (1⁄3 HP) R-134a 4200 (1⁄2 HP) R-134a 5120 (3⁄4 HP) Refrigeration System A top mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F. Controller The easy to use water resistant INTELA-TRAUL® microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption. Interior Readily removable, interior-mounted, stainless steel guides for rack are provided for protection. Maximum rack size with wheels inboard of frame is 27" wide by 29" deep by 66" high. Racks supplied by others. Warranties Both a one year parts and labor warranty and a five year compressor warranty (self-contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL® control is warranted by a two year parts and labor warranty. Elevation R/ARI132LPUT Elevation R/ARI232LPUT Elevation R/ARI332LPUT NOTES NOTE: Figures in parentheses reflect metric equivalents. 1= Based on a 90 degree F ambient and 20 degree F evaporator. 2= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to form TR35837. One Section Models Equipped With One NEMA 5-15P Plug Two & Three Section Models Equipped With One NEMA 5-20P Plug Plan - R/ARI132LPUT Plan - R/ARI232LPUT NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed. REQUIRED CLEARANCES In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks. NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties. Continued product development may necessitate specification changes without notice. Part No. TR35767 (revised 4/10) TRAULSEN 4401 BLUE MOUND RD. PHONE 1 (800) 825-8220 Website: www.traulsen.com Plan - R/ARI332LPUT FT. WORTH, TX 76106 FAX-MKTG. 1 (817) 624-4302 Section - All Models
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project