30A DC-DC Step Down Converters Model SDC-30 30 Amps Design Features - Advanced switch mode design Mount in almost any location Compact and light weight Reverse polarity protection High efficiency Cycle by cycle current limiting circuit Over voltage protection Short circuit protection 2 YEAR LIMITED WARRANTY MODEL NO. SDC-30 CAUTION! THERE IS NO ISOLATION BETWEEN THE INPUT AND THE OUTPUT INPUT AND OUTPUT HAVE A COMMON NEGATIVE VOLTAGE OUTPUT CURRENT ENVIRONMENT PROTECTIONS SAFETY AND EMC STANDARDS GENERAL NOTES: INPUT TO OUTPUT ISOLATION INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT VOLTAGE REGULATION INPUT CURRENT AT NO LOAD CONTINUOUS CURRENT LIMIT * OUTPUT RIPPLE AND NOISE EFFICIENCY OPERATING AMBIENT TEMPERATURE HUMIDITY OVERLOAD COOLING OVER HEATING REVERSE POLARITY OVER VOLTAGE INPUT SIDE FUSE EMISSION IMMUNITY AUTOMOTIVE DIRECTIVE INPUT / OUTPUT CONNECTIONS DIMENSIONS, MM (L x W x H) DIMENSIONS, INCHES (L x W x H) WEIGHT, KG WEIGHT, LB Not isolated. Input and output connections have a common negative 20 to 32 VDC 13.8 VDC ± 0.1 V 3% < 25 mA 30A 35A less than 50 mV RMS ~ 92% - 20o to + 30o C (derate linearly to zero at 70o C) Max. 95%, non condensing By current limiting Temperature controlled fan Drop in output voltage Fuse protection, 30 A Varistor (also protects against load dump) 30 A (inside the unit) EN50081-1 EN50082-1 95 / 45 / EC Terminal Block - 6.3 mm male flat tab, quick connect 48 x 89 x 151 1.9 x 3.5 x 5.9 0.6 1.5 1. Specifications are subject to change without notice * In current limit condition, the output voltage will drop if the current drawn increases beyond the current limit value of 35A 12004-SDC-30-0919 To view a full selection of Samlex products visit our website at www.samlexamerica.com or contact us: 1-800-561-5885 or [email protected]
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021