advertisement
WARNING
Carefully read and understand all instructions and warnings in this manual. Failure to properly use this Infant Car Seat increases the risk of SERIOUS INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided on the back of the seat.
STOP
If you experience any difficulty in using this product, please contact our customer service department at
1-800-328-7363 between the hours of 8:00am and
4:30pm Pacific Standard Time for assistance. Please have your model number and manufacturing date available when you call. This information can be found on a small sticker on the bottom of the product.
www.babytrend.com
Baby Trend, Inc.
1607 S. Campus Ave.
Ontario, CA 91761
1-800-328-7363
(8:00am ~ 4:30pm PST) www.babytrend.com
EZ FLEX-LOC
INFANT SEAT/CARRIER
OWNER’S MANUAL
®
32
Copyright © 2018 , Baby Trend, Inc.
www.babytrend.com
E32EF0516_030218
1
TABLE OF CONTENTS
1.0 General Warnings ..................................................................................... 3
2.0
Registration Information .......................................................................... 6
3.0
Features and Benefits .............................................................................. 7
3.1 Carrier WITH Harness System ............................................................................... 7
3.1.1 Rear view of Adjustable Back Model ................................................................ 8
3.2 Base ..................................................................................................................... 12
4.0
Preparing Car Seat for Use .................................................................... 14
4.1 Assembling the Car Seat ...................................................................................... 14
5.0 Height and Weight Limitations .............................................................. 15
6.0
Important Safety Information ................................................................. 16
6.1 About Your Child .................................................................................................. 17
6.2 About Your Vehicle ............................................................................................... 17
6.3 About this Car Seat .............................................................................................. 18
6.4 About Use as a Carrier ......................................................................................... 20
7.0
UAS Anchorage System ......................................................................... 22
8.0
Selecting a Vehicle Seat Location ......................................................... 23
8.1 Overall Considerations in Selecting a Location .................................................... 23
8.2 Check that the Vehicle Seat Meets the Following Requirements ......................... 25
9.0
Vehicle Seat Belts ................................................................................... 26
9.1 SAFE Vehicle Seat Belt Systems ......................................................................... 26
9.2 Locking Clip Installation ....................................................................................... 29
9.3 UNSAFE Vehicle Seat Belt Systems .................................................................... 30
10.0 Securing Car Seat in Your Vehicle .............................................................32
10.1 Preparation for Installation in Vehicle ................................................................. 32
10.2 Base Installation with UAS System .................................................................... 33
10.2.1 Preparation for Installation with UAS ............................................................ 34
10.2.2 Secure Base with UAS Lower Connectors .................................................. 35
10.2.3 To Remove Base .......................................................................................... 37
TABLE OF CONTENTS
10.3 Base Installation with Vehicle Belt ...................................................................... 38
10.3.1 Initial Positioning ........................................................................................... 38
10.3.2 Secure Base WITH Vehicle Combination Lap/Shoulder Belt........................ 40
10.3.3 Secure Base WITH Vehicle Lap Belt only..................................................... 40
10.3.4 Tightening Vehicle Seat Belt ......................................................................... 40
10.3.5 To Remove Base .......................................................................................... 41
10.4 Attach Car Seat to Base ..................................................................................... 42
10.5 Removing Car Seat from Base .......................................................................... 42
10.6 Car Seat Only Installation without Base ............................................................. 43
10.6.1 Initial Positioning ........................................................................................... 43
10.6.2 Securing Car Seat WITH Vehicle Combination Lap/Shoulder Belt ............... 44
10.6.3 Securing Car Seat WITH Vehicle Lap Belt only ............................................ 45
10.6.4 Tightening Vehicle Seat Belt ......................................................................... 45
10.6.5 To Remove Car Seat .................................................................................... 46
11.0 Harness System Use and Adjustment ..............................................................................47
11.1 Securing Your Child with Harness System ......................................................... 47
11.2 Adjusting Harness Strap Height ......................................................................... 51
11.2.1 Car Seat with Adjustable Back ...................................................................... 51
11.3 Adjusting the Crotch Strap Length ...................................................................... 52
11.4 Adjust Seat Recline Angle .................................................................................. 54
12.0 Final Safety Check ................................................................................ 57
13.0 Additional Information ......................................................................... 58
13.1 Care & Maintenance .......................................................................................... 57
13.2 Using Your Car Seat with a Baby Trend Stroller ................................................ 61
13.3 Airplane Use ....................................................................................................... 61
13.4 Replacement Parts ............................................................................................. 61
13.5 Warranty ............................................................................................................. 62
2
3
1.0
General Warnings
WARNINGS TO PARENTS AND CAREGIVERS
WARNING
Proper use is required! Even if using this car seat seems easy to figure out, it is very IMPORTANT TO FOLLOW THE
INFANT CAR SEAT AND VEHICLE OWNER’S MANUALS!
• Failure to follow these instructions and Car Seat labels can result in a child striking the vehicle’s interior during a sudden stop or crash.
- Your child’s safety depends on proper installation and use of this car seat. Read and understand all information in this owner’s manual and product labels before using this car seat.
- Improper use of the car seat can result in serious injury or death from a sudden stop or crash.
- Toys or other objects attached to carry handle can cause injury in a crash. Never attach toys or other objects to handle when in vehicle.
• DO NOT use accessories or parts other than those provided by Baby
Trend. Use of accessories or parts from other manufacturers could alter the performance and safety of the car seat.
• DO NOT use this car seat if it has been in a crash, it must be replaced.
A crash can cause unseen damage and using it again could result in serious injury or death.
• DO NOT use car seat if it is damaged or missing parts.
No car seat can guarantee protection from injury in every situation, but proper use helps reduce the risk or serious injury or death.
1.0
General Warnings
The ultimate safety of your child depends on the proper and secure installation of the Car Seat in your vehicle. Proper installation requires that you read and understand this entire manual and your vehicle’s owner’s manual before placing your child in the seat. DO NOT allow others to install or use this Car Seat unless they completely understand its proper installation and use.
Your child’s safety depends on you:
1. Choosing the best location within your vehicle for the Car Seat.
Seating positions with Active Frontal Air Bags must be avoided.
2. Adjust the harness shoulder strap height to be at or just below the top of your child’s shoulders.
3. Adjust harness length to snugly adjust the harness straps around your child.
4. This Car Seat is ONLY to be used in a vehicle in the rear-facing position.
5. Proper use and routing of the seat belts in your vehicle is essential for proper installation.
6. Proper recline when installed in a vehicle. See Seat Angle
Indicator.
7. UAS or vehicle seat belt must be secured, tightly adjusted and stay tightly adjusted around car seat.
4
5
1.0
General Warnings
WARNING
• Proper recline angle for seat back recline is required.
Follow the instructions for adjusting recline angle using car seat with base and using without base.
- Too upright can cause a young infant’s head to fall forward and restrict breathing.
- Too reclined can cause ejection in a sudden stop or crash.
When using the car seat WITH or WITHOUT the base, follow the instructions and use the Seat Angle Indicator on the side of the car seat to adjust the seat recline angle based on your child’s weight.
2.0
Registration Information
REGISTER YOUR CAR SEAT
Please complete the following information. The model number and manufactured in (date) can be found on a label on the bottom of the Car
Seat.
Model Number: ___________________
Manufactured in: __________________
Purchase Date: ___________________
Please fill out the prepaid registration post card attached to the harness straps and mail it today.
Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address, email address if available, and the restraint’s model number and manufacturing date to:
Baby Trend, Inc., 1607 S. Campus Avenue, Ontario, CA 91761 or call 1-800-328-7363 or register online at: http://www.babytrend.com/
registration.html. For recall information, call Transport Canada at 1-800-
333-0371 (toll free), 613-998-8616 (Ottawa area) or go to http://www.tc.gc.ca/ eng/roadsafety/safedrivers-childsafety-notices-menu-907.htm.
If You Need Help
Please contact our Customer Service Department with any questions concerning your child restraint. When you contact us, please have the model and manufactured in (date) ready. The model number and manufactured in
(date) can be found on a white label located on the bottom of the car seat.
USA Toll Free: 1-800-328-7363
8:00 a.m. to 4:30 p.m. (PST) Monday - Friday or www.babytrend.com
6
3.0
Features and Benefits
3.1 Carrier WITH Harness System
Carry Handle
Canopy
Adjustable Back
(Adjustable Back
Model Only)
Seat Pad
Harness
Straps
Harness
Buckle
7
Harness Adjuster
Strap Harness Adjuster
Button
Handle
Release
Button
Harness Clip
Vehicle Belt
Path/Hook without base
Locking Clip
(stored on side of seat pad)
Crotch Strap
3.0
Features and Benefits
3.1.1 Rear view of Adjustable Back Model
Harness Slots
Canopy
Seat Angle
Indicator
Adjuster Knob
Harness
Strap
Owner’s
Manual
Holder
Harness Adjuster
Strap
Base Release
Handle
Base/Stroller
Hook
Belt Adjuster Plate
Lock Bar
8
3.0
Features and Benefits
Carry Handle
WARNING
• Toys or other objects attached to carry handle can cause injury in a crash. Never attach toys or other objects to handle when in vehicle.
The Carry Handle has four positions: the Carry position, a Mid-
Storage position, a Storage position and the Non-Rocking position.
3.0
Features and Benefits
• Before lifting the Car Seat, push on the handle to check that both sides of the handle have locked into Carry position.
Build-in Safety Harness
Front adjust 5-point Safety Harness, adjust the harness straps with a push of a button.
5-Point Harness
Crotch Strap
The crotch strap is adjustable in length to ensure a safe and comfortable fit for harness.
9
Carry Mid-Storage
To adjust handle:
• Depress the two buttons located on the handle just above the connection to the
Car Seat shell to release the handle.
• Slowly rotate the handle to the desired position. The buttons should pop out and the handle should automatically lock into the new position. (Fig 9-1)
Storage Non-Rocking
9-1
Locking Clip
The Locking Clip is stored under the seat pad on the right side of the Car Seat and is used to securely install the Car Seat with certain types of vehicle lap/shoulder combination belts.
Locking Clip
10
11
3.0
Features and Benefits
Seat Angle Indicator
The Seat Angle Indicator is used to ensure that the seat is installed at the proper degree of recline to adequately protect your child in a crash.
Use Seat Angle Indicator to adjust seat recline when installing car seat
WITH and WITHOUT Base.
For information on adjusting the seat angle for your child see Section 11.4
Adjusting Seat Recline Angle.
10 kg
(22 lbs./livres) and
under
10 to
14.5 kg
(22 to 32 lbs./livres)
Seat Angle
Indicator
3.0
Features and Benefits
3.2 Base
Foot Adjustment
Lock Button
UAS Connector Storage on underside
Anti-Rebound Bar
UAS Lower
Anchor Belt
UAS Connectors
UAS Attachment Hook
UAS Lower
Anchor Belt
12
3.0
Features and Benefits
Your Car Seat base can be installed with either the
UAS anchorage system or with a vehicle belt.
When available, UAS is the recommended method of securing the Car Seat in the vehicle.
To properly install the Car Seat and protect your child, you must carefully follow the instructions that correspond with the installation method to be used and the model you have purchased.
4.0
Preparing Car Seat for Use
4.1 Assembling the Car Seat
Attaching the Canopy
Slip the canopy stays through the sleeves on the canopy.
The canopy is attached by inserting the ends of the canopy plastic stays into the female fittings found on the inside of the handle hub.
13
UAS Connectors Vehicle Belt Path
14
15
5.0
Height and Weight Limitations
WARNING!
DEATH or SERIOUS INJURY can occur
- Proper use is required
Your child must meet ALL these requirements:
• Weight between 2.2 and 14.5 kg (5 and 32 lbs)
• Height is 81.3 cm (32 inches) or less
• The Harness Straps must be at or just
BELOW child’s shoulders when in highest adjustment position
6.0
Important Safety Information
WARNING!
DEATH or SERIOUS INJURY can occur:
Failure to follow these instructions and Car Seat labels can result in child striking the vehicle’s interior during a sudden stop or crash.
• Proper installation of the Car Seat in your vehicle and proper securing of your child in the Car Seat are essential to ensure the safety of your child. Your child can be injured in a sudden stop or crash if not properly secured in the Car Seat or if the Car Seat is not properly installed in the vehicle.
• Use only in a rear-facing position when using Car Seat in a vehicle.
• Children have STRANGLED in loose or partially buckled harness straps. Fully restrain the child even when carrier is outside the vehicle.
• Secure this child restraint with the vehicle’s universal anchorage system (UAS) if available or with a vehicle seat belt.
• Never put a Car Seat in a vehicle front seat location unless specifically recommended in vehicle owner’s manual.
• Do not place this restraint in a vehicle seat that has an active frontal air bag. If a frontal air bag inflates it can hit the Car Seat with great force and cause death or serious injury to your child.
• This Car Seat is designed and tested to accommodate a child of a specific range of WEIGHT and HEIGHT. Using the Car Seat for a child whose weight or height is outside of these limits will increase the risk of death or serious injury in the event of a sudden stop or crash (see Section 5.0 of this manual for
WEIGHT and HEIGHT Limitations for this car seat ).
• Toys or other objects attached to carry handle can cause injury in a crash. Never attach toys or other objects to handle when in vehicle.
16
6.0
Important Safety Information
6.0
Important Safety Information
• DO NOT use accessories or parts other than those provided by Baby Trend, Inc. Use of accessories or parts from other manufacturers could alter the performance and safety of the Car
Seat.
• This Car Seat is certified for use in Motor Vehicles and Aircraft and conforms to all applicable Canadian Motor Vehicle Safety standards.
(213 and 213.1).
• This Car Seat is certified for use on Aircraft WITHOUT the Base.
No car seat can guarantee protection from injury in every situation, but proper use helps reduce the risk of serious injury or death.
6.1 About Your Child
• Special needs children, such as pre-term babies, may suffer difficulties in using this Car Seat. The seat recline angle in this Car
Seat may not be appropriate for Special Needs babies. If your child has special needs or any breathing difficulties, please discuss your child’s needs and travel in Car Seats with your pediatrician, or other competent health care provider, to ensure the safety of your child.
• DO NOT dress your child in bulky clothing or other garments that will hinder the harness from being properly buckled between your child’s legs and belts being snugly adjusted around your child.
• Never leave your child unattended, even for a moment.
17
6.2 About Your Vehicle
• Proper installation of the Car Seat in your vehicle and proper securing of your child in the Car Seat are essential to ensure the safety of your child. Quick turns, sudden stops, or other maneuvers in avoiding a crash, as well as a crash, can injure your child if not properly secured in the seat or if the seat is not properly installed in the vehicle.
- UAS attachment or vehicle seat belt must be secured, tightly adjusted, and stay tightly adjusted around car seat.
- Harness must be snugly adjusted around your child.
• Not all vehicle seat belts or seating locations can be used with this
Car Seat. Read vehicle owner’s manual and Section 9.0 Vehicle
Seat Belts in this manual.
• Some vehicles do not have any safe location where this Car
Seat can be securely installed. In addition, many vehicles do not have seat belt systems that will adequately hold this Car Seat in the required position. Please refer to both this manual and your vehicle owner’s manual for complete information for proper, safe installation of this Car Seat.
6.3 About this Car Seat
• This car seat is for use only in passenger cars, vans, trucks, and multi-purpose vehicles such as SUVs (sport utility vehicles) and
CUVs (crossover utility vehicles).
• Do not use this Car Seat in a boat, on a motorcycle or in other non- certified applications.
• This Car Seat is constructed of plastic that can deform over time if left with any object in the seat while stored. DO NOT leave heavy objects in the Car Seat while not in use. DO NOT store the seat in the trunk of your car with heavy objects on it or with pressure on the Car Seat from the trunk lid.
• Replace the Car Seat and Base after a vehicle crash of any kind.
A crash, even a minor crash, can cause undetectable damage to the Car Seat or Base that may cause the Seat or Base to fail in a
18
6.0
Important Safety Information
6.0
Important Safety Information
19 subsequent crash. DO NOT use the Car Seat if it is damaged or broken.
• DO NOT use Car Seat if it is damaged or is missing parts.
• Never combine this Car Seat or Base with any other Car Seat or Base from any other manufacturer. If you are in need of an additional Base, please contact your local dealer or Baby Trend to obtain one.
• Never leave the Car Seat or Base unsecured in your vehicle even when not occupied. An unsecured seat or base can fly through the vehicle in the event of a crash, sudden stop or sharp turn and cause serious injury to the driver, who may then loose control of the vehicle, or to other passengers. When not in use, either remove the seat and or base from the vehicle or make sure that both are securely belted to the vehicle according to these instructions.
• Toys or other objects attached to carry handle can cause injury in a crash. Never attach toys or other objects to handle when in vehicle.
• The Car Seat may become very hot if left in direct sunlight. Your child may suffer burns from hot components. Always check the Car
Seat for hot surfaces that may come into contact with your child before placing your child in the Car Seat. We suggest that you cover the Car Seat with a blanket or towel if it will be subject to direct sunlight while you are away from the vehicle.
• Discontinue use of the Car Seat and Base after six (6) years from the date of manufacture. The date of manufacture can be found on the label located on the underside of the Car Seat or Base. When discarding an out of date seat, please ensure that someone finding the seat will be unable to use it. We suggest that you disable the seat by removing the pad and harness and discarding the pieces at different times.
6.4 About Use as a Carrier
WARNING
• Never leave child unattended.
• SUFFOCATION HAZARD: Infant carrier can roll over on soft sofas, or other soft surfaces.
• STRANGULATION HAZARD: carrier when straps are loose or undone.
- Children have STRANGLED in loose or partially buckled harness straps. Fully restrain the child even when carrier is used outside the vehicle.
• FALL HAZARD: Child’s activity can move
Never Leave Your Child Unattended, even if they are asleep. Very often when you arrive at your destination you will find that your child has fallen asleep in the Seat. Do not leave the child unattended, even for a minute. Your child can tip or move the carrier by their movements, kicking or grabbing on to their surroundings.
If the carrier tips over, your child can suffocate from the surface that the seat is on as well as from the pressure on their chest from the safety harness. In addition, if the carrier is placed too upright, the child’s head can fall forward and cause the child to have difficulty breathing.
20
21
6.0
Important Safety Information
WARNING!
To avoid death or serious injury from suffocation, falls and other hazards:
the carrier on soft or plush surfaces such as a bed, comforter, couch, sofa, chair, etc. The carrier has a very high possibility of tipping over if placed on a soft or plush surface.
• FALL HAZARD: on counter tops, tables, or any other elevated surface.
- Before lifting the carrier with the handle, check that the handle an unlocked handle and can result in injury to your child.
• Strings and cords can cause strangulation: neck, such as hood strings, pacifier cords, etc.
- DO NOT suspend strings on or over carrier.
- DO NOT attach strings to toys.
- DO NOT place the carrier near a window where cords from blinds or drapes can strangle a child.
Carrier use:
- Rocker use: Handle in mid-storage or storage position.
- Non-Rocking use: Handle in non-rocking position.
7.0
UAS Anchorage System
UAS ANCHORAGE SYSTEM
The Universal Anchorage System (UAS) is designed to make
installation of child Car Seats in motor vehicles easier by requiring child restraints to be installed without using the vehicle’s seat belt system. Since September 1, 2002, at least two rear seating positions of all cars, mini vans and light trucks come equipped
UAS systems which include lower child restraint anchor points located between a vehicle’s seat cushion and seat back, and top tether anchors. Also on September 1, 2002, all child restraints will have two attachments which will connect to the vehicle’s lower anchor points and top tethers (on forward-facing car seats).
Together, the lower anchors and upper tethers make up the UAS system. Read your vehicle owner’s manual for exact locations, identification and requirements for use with a child restraint.
ONLY use UAS to secure your child
Vehicle Top
Tether Anchors restraint in a seating position recommended by the vehicle manufacturer.
Refer to the vehicle owner’s manual for the vehicle’s top tether anchor locations.
They should be identified by one of the symbols shown in (Fig 22-1).
When available, UAS is the recommended method of securing the Car Seat in the vehicle.
UAS Lower
Anchors
22-1
22
8.0
Selecting a Vehicle Seat Location
8.0
Selecting a Vehicle Seat Location
SELECTING THE BEST VEHICLE LOCATION
WARNING!
DEATH or SERIOUS INJURY can occur:
• IMPROPER PLACEMENT OF THE CHILD RESTRAINT
INCREASES THE RISK OF SERIOUS INJURY OR DEATH. rear center, seating position. The rear seat directly behind the front seats NOT in a third row rear seat. (Fig 24-1)
• ONLY place in a forward-facing vehicle seat. DO NOT place this Car Seat in any vehicle seat that faces to the rear.
(Fig 24-2)
24-1
WARNING
• Not every location within an automobile may be safe for the installation of this Car Seat. Car Seat must be tightly secured and remain tightly secured at all time. Some automobiles have no seating position installation of a Car
Seat. Improper placement or use of a car seat that is not tightly secured in a vehicle will increase the risk of death or serious injury.
• Please follow the instructions in this manual and in your vehicle owner’s manual carefully to ensure proper location and installation of this Car Seat.
If you are uncertain about the proper location of the Car Seat within the vehicle, contact your vehicle manufacturer directly or through their dealer before using this Car Seat. You are also invited to call Baby Trend at
1-800-328-7363 for additional information or assistance.
23
8.1 Overall Considerations in Selecting a Location
• According to accident statistics, children are safer when properly restrained in rear vehicle seating positions, rather than front seating positions. Whenever possible, this Car Seat should be secured in the
• DO NOT place this Car Seat in any vehicle seat that faces to either side of the vehicle.
(Fig 24-3).
• We recommend that you use the center rear seat position as the safest location for the Car Seat. In addition, whenever possible, have an adult ride in the rear with the child in order to monitor the child.
Note: UAS system may not be available in the center rear seat position. Install with a vehicle seat belt if UAS is not available.
24-2
24-3
• If the driver is the only adult in the vehicle and the child requires constant monitoring, then a vehicle front seating position may be used if there is no passenger side Active Frontal Air bag and all of the following requirements are met for this location.
24
8.0
Selecting a Vehicle Seat Location
WARNING
DO NOT place rear-facing child seat on front seat with active frontal air bag.
DEATH OR SERIOUS INJURY can occur. The back seat is the safest place for children 12 and under.
25
• NEVER place this Car Seat in a vehicle seating location that has an
Active Frontal Air Bag! Active Air Bags inflate with great force! An inflating Air Bag can strike a Car Seat with enough force to cause death or serious injury to your child. If your vehicle is equipped with a front passenger side Active Air bag, please refer to the vehicle’s owner’s manual for additional information about Active Air bags and child Car Seat installation.
• DO NOT use this Car Seat in a vehicle that has a vehicle seat back that does not lock into place. A seat back that folds forward must have a latch or locking mechanism to prevent it from flying forward and striking the child in a sudden stop or accident.
• Please review your vehicle owner’s manual to determine the best location for the Car Seat or to determine if any locations are unsafe for
Car Seat installation. If you do not have the vehicle owner’s manual
9.0
Vehicle Seat Belts or the owner’s manual does not address child Car Seat installation, please contact the vehicle manufacturer to obtain this information before using this Car Seat.
VEHICLE SEAT BELT REQUIREMENTS
WARNING!
DEATH or SERIOUS INJURY can occur:
• THE CAR SEAT MUST BE TIGHTLY SECURED BY THE VEHICLE SEAT
BELT AT ALL TIMES. A VARIETY OF VEHICLE SEAT BELT SYSTEMS
ARE AVAILABLE IN VEHICLES. SOME OF THESE VEHICLE SEAT
BELT SYSTEMS ARE NOT SAFE FOR USE WITH THE CAR SEAT.
Even newer vehicles can have seat belts systems that are NOT safe for use with the Car Seat. These systems may look safe but their method of operation precludes their use with the Car Seat.
If you are unsure if the vehicle seat belt is safe for use with the
Car Seat, check the vehicle owner’s manual or contact the vehicle manufacturer, or your vehicle dealer for additional information.
9.1 SAFE Vehicle Seat Belt Systems
The following vehicle seat belt systems CAN BE USED with the Car Seat provided that all of the other requirements prescribed in these instructions, including seat position,
26
9.0
Vehicle Seat Belts
27 secure installation and all instructions provided by your vehicle owner’s manual, are followed.
Lap Belts (Manually Adjusted)
A lap belt that is manually adjusted and will remain tightly adjusted around the
Car Seat while the vehicle is in motion is suitable for use with the Car Seat. Pulling the belt through the buckle after the buckle is fastened tightens this type of seat belt. (Fig 27-1)
Lap Belts with Automatic Locking
Retractor (ALR)
A lap belt that cannot be lengthened once it is fastened is suitable for use with the
Car Seat. These seat belts often have an automatic locking retractor (ALR) that will allow the belt to be lengthened but once fastened, must be unbuckled and allowed to retract fully before allowing the belt to be lengthened again. (Fig 27-2)
Combination Lap/Shoulder Belt with
Locking Latch Plate
A lap/shoulder combination seat belt with a latch plate that locks the lap belt into position is suitable for use with the Car
Seat. (Fig 27-3) Once this type of seat belt
27-1
27-2
27-3
9.0
Vehicle Seat Belts is fastened, the latch plate prevents the lap belt from loosening. This combination seat belt does not require a Locking Clip.
Note: The belt is tightened by pulling hard on the shoulder belt while pushing down hard on the Car Seat.
Combination Lap/Shoulder Belt with Sliding
Latch Plate
A combination lap/shoulder belt with a latch plate that can slide freely along the belt,
(Fig 28-1), is suitable for use with this car seat when the belt is locked to prevent movement of the car seat. If the belt includes a lockable retractor, the retractor MUST be locked or a locking clip MUST be used. If the belt does not include a locking retractor then a locking clip,
(Fig 28-2), MUST be used.
A locking clip must be used with all combination Lap/Shoulder belt installations with children weighing more than 22 lbs,
(10 kg).
Please refer to the vehicle owners manual to determine if your lap/shoulder belt includes a lockable retractor and how to lock it.
28-1
Locking clip
28-2
28
29
9.0
Vehicle Seat Belts
9.2 Locking Clip Installation
Locking Clip is stored under seat pad on the right side of the
Car Seat. (Fig 29-1)
1. Route the lap portion of the vehicle combination lap shoulder belt through vehicle belt path on base or car seat and buckle vehicle seat belt.
2. Tighten the buckled seat belt around the Car Seat by pulling upward on the shoulder belt while pushing down hard on the Car Seat or base.
3. While maintaining downward pressure on the Car Seat, squeeze the vehicle shoulder belt and lap belt together just above the buckle to prevent it from moving. Unbuckle the vehicle seat belt, being careful to prevent movement of the buckle.
4. Secure the vehicle shoulder belt to the lap belt by installing the Locking Clip 1.25 cm (1/2”) from the buckle. (Fig 29-2)
5. Re-buckle the seat belt and check that the seat belt is tightly adjusted and stays tightly adjusted around the Car Seat. Pull firmly on the lap belt to ensure that the Locking Clip is locking the lap belt and remains very tight.
Locking Clip
29-1
1.25 cm (1/2”)
29-2
6. A locking clip must be used with all combination Lap/
Shoulder belt installations with children weighing more than 22 lbs. (10 kg).
Test installation to make sure Car Seat is secure. If NOT secure, additional belt tightening is required. Repeat steps above until secure.
9.0
Vehicle Seat Belts
9.3 UNSAFE Vehicle Seat Belt Systems
DO NOT use the following types of seat belt systems with the Car Seat.
These belt systems will not hold the Car Seat securely in place at all times.
In addition, the Locking Clip provided with this product will NOT make these belt systems safe to use. NEVER USE unsafe vehicle belts systems!
Note: UAS can be used IN PLACE OF the following unsafe vehicle seat belts systems if your vehicle is equipped with UAS anchorage system.
Lap Belts with Emergency Locking Retractor (ELR)
DO NOT use a lap belt that stays loose after installed and locks only in a crash or sudden stop. These lap belts utilize an Emergency Locking Retractor (ELR) and are often found in combination with motorized shoulder belts. Because these belts will allow the Car
Seat to move about on the vehicle seat, the chance of the Car Seat being out of the proper position in a crash is very high. Accordingly, DO NOT use the
Car Seat with this type of seat belt system. Please see your vehicle’s dealer or owner’s manual for information on converting this seat belt system to one that is acceptable for use with a Car Seat. (Fig 30-1)
Combination Lap/Shoulder Belt
with Retractor
DO NOT use a lap/shoulder belt system if the lap belt and shoulder belt each have retractors
30-1
30-2
30
31
9.0
Vehicle Seat Belts at one end. This type of seat belt system will not adequately restrain the Car Seat. (Fig 30-2)
Passive Restraint – Lap or Shoulder Belt
Mounted on Door
DO NOT use a seat belt that is connected to the door in any way. These types of seat belts are designed to automatically surround the occupant when the door is closed. This type of seat belt will
NOT adequately restrain the Car Seat. (Fig 31-1)
Passive Restraint – Lap Belt with Motorized
Shoulder Belt
DO NOT use a shoulder belt that moves along a track. These systems typically move to surround the occupant when the door is closed. This type of belt system will NOT adequately restrain the Car Seat. (Fig 31-2)
Lap Belts Forward of Seat Crease
DO NOT use a seat belt that is anchored on the seat more than 2 inches forward of the crease between the seat bottom and the seat back.
This type of seat belt anchors the Car Seat too far forward and the Car Seat will not be safely restrained in the vehicle. (Fig 31-3)
31-1
31-2
31-3
10.0
Securing Car Seat in Your Vehicle
10.1 Preparation for Installation in Vehicle
When available, UAS is the recommended method of securing the Car Seat in the vehicle.
WARNING!
DEATH or SERIOUS INJURY can occur:
• FAILURE TO PROPERLY SECURE THE CHILD
RESTRAINT IN YOUR VEHICLE INCREASES THE RISK
OF SERIOUS INJURY OR DEATH IN THE EVENT OF
A SUDDEN STOP, SHARP TURN OR CRASH.
• ALWAYS SECURE THIS CAR SEAT IN A REAR-FACING
POSITION WHEN USING IT IN A VEHICLE.
• REMOVE ANY TOY OR OTHER OBJECTS ATTACHED TO CARRY
HANDLE BEFORE INSTALLING CAR SEAT IN VEHICLE.
1. Park your vehicle on a level surface so that the Seat
Angle Indicator located on the left side of the Car Seat will properly indicate the proper angle of recline of the seat.
2. Make sure you have selected an acceptable location for the Car Seat as instructed in Section 8.0 Selecting A Vehicle Seat Location for the Car Seat.
32
10.0
Securing Car Seat in Your Vehicle
10.0
Securing Car Seat in Your Vehicle
3. Check again for any Active Frontal Air bags. DO NOT use any location that has an active frontal air bag or is adjacent to an
Active Air bag such that, when deployed, the Active Air bag may come into contact with the Car Seat. Many passenger side Frontal Air bags are designed to deploy to protect the passenger side as well as the center front seating position.
Please see the Active Air bag warnings in your vehicle owner’s manual to help determine unsafe locations in the vehicle.
4. If the front seat position is used, slide the vehicle seat as far to the rear as possible to prevent the Car Seat from striking the dash in a crash. If the rear seat position is used, slide the vehicle seat directly in front of the Car Seat forward enough to prevent the Car Seat from striking the vehicle seat back in a crash.
5. Remove toys or other objects attached to carry handle.
• NEVER CONNECT MORE THAN ONE UAS CONNECTOR TO A
VEHICLE LOWER ANCHOR UNLESS SPECIFICALLY ALLOWED IN
VEHICLE OWNER’S MANUAL.
• FAILURE TO INSTALL CAR SEAT AT CORRECT SEAT RECLINE
ANGLE CAN CAUSE DEATH OR SERIOUS INJURY.
• PROPER RECLINE ANGLE FOR SEAT BACK RECLINE IS
REQUIRED. FOLLOW THE INSTRUCTIONS FOR ADJUSTING
RECLINE ANGLE USING SEAT ANGLE INDICATOR.
- TOO UPRIGHT CAN CAUSE A YOUNG INFANT’S HEAD
TO FALL FORWARD AND RESTRICT BREATHING.
- TOO RECLINED CAN CAUSE EJECTION IN A SUDDEN STOP
OR CRASH.
10.2.1 Preparation for Installation with UAS
1. Follow instructions in Section 10.1
Preparation for Installation in Vehicle.
33
10.2 Base Installation with UAS System
WARNING!
• UAS CONNECTORS ON BASE MUST BE SECURED ONTO
VEHICLE LOWER ANCHORAGES.
• UAS LOWER ANCHOR BELT MUST BE
TIGHTLY ADJUSTED AND STAY TIGHTLY
ADJUSTED AROUND BASE AT ALL TIMES. IF
UAS BELT CANNOT BE TIGHTLY ADJUSTED
OR WILL NOT STAY TIGHTLY ADJUSTED,
MOVE CAR SEAT TO ANOTHER SEATING
LOCATION WITH UAS OR SECURE BASE
WITH A VEHICLE SEAT BELT.
2. Locate a UAS seating position and locate the UAS anchorages in the vehicle seat.
(See Section 7.0 UAS Anchorage System for more information)
3. If vehicle seat back is adjustable, adjust into the upright position or the position specified in the vehicle owner’s manual for use with a
Car Seat.
Vehicle Top
Tether Anchors
UAS Lower Anchors
34
35
10.0
Securing Car Seat in Your Vehicle
10.0
Securing Car Seat in Your Vehicle
2
10.2.2 Secure Base with UAS Lower Connectors
1. Remove any toys or other objects attached to the carry handle before installing car seat in vehicle.
6. Slide the UAS belt into the Vehicle Belt Path openings on the side of the base (1) and under the edge of the anti-rebound bar (2). (Fig 36-1)
1
2. Snap car seat into base and place car seat and base in the rear-facing position onto the vehicle seat in the vehicle seating location selected.
Check for the correct seat recline and adjust recline as necessary. (See Section 11.4 Adjust
Seat Recline Angle)
3. Remove the Car Seat from the base by squeezing the base release handle located under the center of the foot end of the Car Seat and lifting upward on the Car Seat. (See Section 10.5 Removing
Car Seat from Base)
4. Remove the UAS connectors from their storage position on the underside of the base.
10 kg
(22 lbs./livres) and
under
10 to
14.5 kg
(22 to 32 lbs./livres)
5. Place the Base on the vehicle seat in a rear-facing position with the anti-rebound bar contacting the vehicle seat back.
7. Locate the UAS anchors in the vehicle Seat and snap the Car Seat UAS connectors onto the steel rod (Fig 36-2). Listen for the click and check that both connectors are firmly attached to the anchor rods by pulling outward on the connectors.
8. Proper installation of the Base requires that the UAS webbing be very tight and stay tight.
To tighten the webbing, push down hard with your knee or hand on the Base while pulling upward on each webbing end. The webbing will automatically lock in place. (Fig 36-3)
9. Check that the base is tightly installed and stays tightly installed by grasping the base near the belt path and trying to move side-to-side. Base should not move more
36-1
36-2
36-3
36
37
10.0
Securing Car Seat in Your Vehicle
10.0
Securing Car Seat in Your Vehicle than 1 inch (2.54 cm). (Fig 37-1) If you find that the UAS loosens or that the base does not stay tightly secured, please see
Section 8.0 Selecting the Best Location for the Car Seat to determine if the position you have selected is adequate and check that you have completed all of the steps in the section entitled Securing the Car Seat or
Base in the Vehicle.
10.2.3 To Remove Base
Disconnect UAS Lower Connectors.
To disconnect the UAS Connectors:
1. Push base toward UAS connectors and while pushing on the base, press the
UAS Release Button on one of the UAS
37-1
UAS Release
Button
37-2
Connectors (Fig 37-2) and pull base away from the vehicle anchors.
2. Repeat on opposite side.
10.3 Base Installation with Vehicle Belt
WARNING!
DEATH or SERIOUS INJURY can occur:
• VEHICLE LAP BELT MUST BE TIGHTLY ADJUSTED AND
STAY TIGHTLY ADJUSTED AROUND CHILD RESTRAINT AT
ALL TIMES. IF VEHICLE BELT DOES NOT STAY TIGHT, READ
VEHICLE OWNER’S MANUAL AND “VEHICLE SEAT BELT
REQUIREMENTS” SECTION IN THIS MANUAL.
• PROPER RECLINE ANGLE FOR SEAT BACK RECLINE IS
REQUIRED. FOLLOW THE INSTRUCTIONS FOR ADJUSTING
RECLINE ANGLE USING SEAT ANGLE INDICATOR.
- TOO UPRIGHT CAN CAUSE A YOUNG INFANT’S HEAD
TO FALL FORWARD AND RESTRICT BREATHING.
- TOO RECLINED CAN CAUSE EJECTION IN A SUDDEN STOP
OR CRASH.
10.3.1 Initial Positioning
1. Follow instructions in Section 10.1 Preparation
for Installation in Vehicle.
38
39
10.0
Securing Car Seat in Your Vehicle
10.0
Securing Car Seat in Your Vehicle
2. Store UAS Connectors in the storage location on the bottom of the base. (Fig 39-1)
3. If vehicle seat back is adjustable, adjust into the upright position or the position or the position specified in the vehicle owner’s manual for use with a Car Seat.
4. Snap Car Seat into Base and place Car Seat and Base onto the vehicle seat in the rear-facing position in the vehicle seating location selected.
Check for the correct seat recline and adjust recline as necessary. (Fig 39-2) See Section 11.4
Adjust Seat Recline Angle.
5. Remove any toys or other objects attached to the carry handle before installing car seat in vehicle.
6. Remove the Car Seat from the base by squeezing the base release handle located under the center of the foot end of the Car Seat and lifting upward on the Car Seat. (Fig 39-3)
7. Place the Base in the rear-facing position in a forward facing vehicle seat with Base contacting vehicle seat back as shown in (Fig 39-4).
39-1
10 kg
(22 lbs./livres) and
under
10 to
14.5 kg
(22 to 32 lbs./livres)
39-2
39-3
39-4
1. To secure base with Vehicle Combination Lap/
Shoulder Belt: slide lap portion of the vehicle lap/ shoulder belt into the Vehicle Belt Path openings, position vehicle shoulder belt against vehicle seat back and buckle vehicle seat belt as shown in
(Fig 40-1).
Note: A locking clip must be used with all combination Lap/Shoulder belt installations with children weighing more than 22 lbs (10 kg).
10.3.3 Secure Base WITH
Vehicle Lap Belt only
1. To secure attach Base with Vehicle Lap Belt only: slide the vehicle lap belt into the Vehicle Belt Path openings, and buckle vehicle belt as shown in (Fig
40-2).
40-1
40-2
10.3.4 Tightening Vehicle Seat Belt
1. Check that lap belt is not twisted.
2. Proper installation of the Base requires that the vehicle lap belt be very tight and stay tight.
40
10.0
Securing Car Seat in Your Vehicle
10.0
Securing Car Seat in Your Vehicle
3. Tighten the vehicle lap belt around the Base by pushing down hard with your hand or knee in the middle of the Base. Then pull the vehicle seat belt to tighten.
Note: For more information on how to tighten the belt for your vehicle seat belt system, see Section 8.0 Selecting A Vehicle Seat
Location and Section 9.1 SAFE Seat Belt Systems, or your vehicle owner’s manual.
4. Check that the base is tightly installed and stays tightly installed by grasping the base near the belt path and trying to move side-to-side.
Base should not move more than 1 inch (2.54 cm). If you find that the vehicle seat belt loosens or that the or the base does not stay tightly secured, please see Section 8.0 Selecting A Vehicle Seat
Location for the Car Seat to determine if the position you have selected is adequate and check that you have completed all of the steps in this section. If vehicle belt does not stay tightly adjusted around base, see vehicle seat belts section. A locking clip may be needed or you may need to move the base to a different seating location. DO
NOT use this seating location if the Car Seat does not remain tightly installed in the vehicle seat!
41
10.3.5 To Remove Base
1. Unbuckle vehicle seat belt.
2. Remove lap belt from Vehicle Belt Path openings.
3. Remove Base.
10.4 Attach Car Seat to Base
1. Remove any toy or other objects attached to carry handle before installing car seat in vehicle.
2. Check that nothing is on top of the base or anything that will interfere with the proper latching of the Car Seat to the Base.
3. Place the Car Seat onto the Base and push down until the
Car Seat locks securely to the Base and you hear a click.
(Fig 42-1)
4. Pull upward on the Car Seat to check that the Car Seat is securely locked onto the base. If the Car Seat does not securely lock onto the Base, the Car Seat will provide NO
Protection for your child. DO NOT use the Car Seat with the
Base if it does not securely lock onto the Base. Please call
Baby Trend at 1-800-328-7363 for assistance.
5. Check that car seat is in the correct recline position based on the weight of your child. See (Fig 42-2) and Section 11.4
Adjusting Seat Recline Angle.
6. Check that toys are removed from carry handle, and then adjust handle into the STORAGE position. When this car seat is used with a base, the carry handle must be in the
STORAGE position (Fig. 42.3).
10.5 Removing Car Seat from Base
1. To remove from base, raise handle to the carry position, squeeze the base release handle located below the foot end of the Car Seat (Fig 42-4).
42-1
10 kg
(22 lbs./livres) and
under
10 to
14.5 kg
(22 to 32 lbs./livres)
42-2
42-3
42-4
42
43
10.0
Securing Car Seat in Your Vehicle
10.0
Securing Car Seat in Your Vehicle
10.6 Car Seat Only Installation without Base
WARNING!
REMAIN TIGHTLY ADJUSTED AROUND CAR SEAT AT ALL
TIMES. IF VEHICLE BELT DOES NOT STAY TIGHT, READ
VEHICLE OWNER’S MANUAL AND “VEHICLE SEAT BELT
REQUIREMENTS” SECTION IN THIS MANUAL.”
• PROPER RECLINE ANGLE FOR SEAT BACK RECLINE IS
REQUIRED. FOLLOW THE INSTRUCTIONS FOR ADJUSTING
RECLINE ANGLE USING SEAT ANGLE INDICATOR.
- TOO UPRIGHT CAN CAUSE A YOUNG INFANT’S HEAD
TO FALL FORWARD AND RESTRICT BREATHING.
- TOO RECLINED CAN CAUSE EJECTION IN A SUDDEN STOP
• TOYS OR OTHER OBJECTS ATTACHED TO CARRY HANDLE CAN
CAUSE INJURY IN A CRASH. NEVER ATTACH TOYS OR OTHER
OBJECTS TO HANDLE WHEN IN VEHICLE.
10.6.1 Initial Positioning
1. Follow instructions in Section 10.1
Preparation for Installation in Vehicle.
2. If vehicle seat back is adjustable, adjust into the upright position or the position or the position specified in the vehicle owner’s manual for use with a Car Seat.
3. Place the Car Seat in the rear-facing position in a forward facing vehicle seat as shown in
(Fig 44-1). The Child must face the rear of the vehicle and Car Seat must be placed in a vehicle seat that faces forward.
4. Check for the correct seat recline and adjust recline as necessary. (Fig 44-2) (See Section
11.4 Adjust Seat Recline Angle.)
5. Remove any toy or other objects attached to carry handle before installing car seat in vehicle.
1. To attach Car Seat with Vehicle combination Lap/Shoulder Belt: Slide the lap portion of the vehicle lap/ shoulder belt into the Vehicle Belt Path openings, buckle vehicle seat belt, and place vehicle shoulder belt against vehicle seat back (Fig 44-3).
Note: A locking clip must be used with all combination Lap/Shoulder belt installations with children weighing more than 22 lbs, (10 kg).
44-1
10 kg
(22 lbs./livres) and
under
10 to
14.5 kg
(22 to 32 lbs./livres)
44-2
44-3
44
10.0
Securing Car Seat in Your Vehicle
10.0
Securing Car Seat in Your Vehicle
1. To attach Car Seat with Vehicle Lap Belt only: Slide the vehicle lap belt into the
Vehicle Belt Path openings and buckle vehicle seat belt. (Fig 45-1)
45
10.6.4 Tightening Vehicle Seat Belt
1. Check that lap belt is not twisted.
2. Proper installation of the Car Seat requires that the vehicle lap belt be very tight and stay tight.
3. Tighten the vehicle lap belt around the
Car Seat by pushing down hard with your hand on one side of the Car Seat and then the other side and pulling on the vehicle seat belt to tighten. (Fig 45-2)
4. Check that the Car Seat is tightly installed and secure in the vehicle by performing the following test every time you use the Car
Seat. Firmly push down and side to side on the head end of the Car Seat to make sure that the vehicle seat belt does not
45-1
45-2
45-3 loosen at all and that the vehicle seat belt is fastened very tightly around the Car Seat. (Fig 45-3) If you find that the vehicle seat belt loosens or that the seat easily moves or rotates downward, please see section 8.0 Selecting A Vehicle Seat Location for the Car Seat to determine if the position you have selected is adequate and check that you have completed all of the steps this section. If vehicle belt does not stay tightly adjusted around base, see vehicle seat belts section. A locking clip may be needed or you may need to move the base to a different seating location.
DO NOT use this seating location if the Car Seat does not remain tightly installed in the vehicle seat!
5. Recheck that Car Seat is properly reclined.
10 kg
(22 lbs./livres) and
Readjust recline if necessary. (Fig 46-1) (See
Section 11.4 Adjust Seat Recline Angle.)
6. Check that toys are removed from carry handle and then adjust the carry handle to
under
10 to
14.5 kg
(22 to 32 lbs./livres) the CARRY position. When this car seat is installed WITHOUT the base the carry handle must be in the
CARRY position (Fig. 44-3 and Fig. 45-1).
46-1
10.6.5 To Remove Car Seat
1. Unbuckle vehicle seat belt.
2. Remove lap belt from Vehicle Belt Path openings.
3. Remove Car Seat.
46
47
11.0
Harness System Use and Adjustment
11.0
Harness System Use and Adjustment
11.1 Securing Your Child with Harness System
WARNING!
DEATH or SERIOUS INJURY can occur:
PROPER INSTALLATION AND USE IS REQUIRED! FAILURE TO
PROPERLY SECURE YOUR CHILD IN THE CHILD RESTRAINT
INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN
THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH.
• Failure to properly adjust the harness straps on your child increases the risk of death or serious injury in the event of a sudden stop or crash. Follow the instructions very closely to ensure that the harness straps are properly adjusted to fit your child at all times. Your child will grow very rapidly! Please check the fit of the harness straps every time you use the Car Seat.
• Snugly adjust harness provided with the Car Seat around child.
• Prevent ejection - Shoulder strap height must be at or just below child’s shoulders.
WARNING
Children have STRANGLED in loose or partially buckled harness straps. Fully restrain the child even when carrier is used outside the vehicle.
• Do not use accessories such as strap covers, blankets, cushions, or padding under harness straps or child unless provided by
Baby Trend.
• Do not use Car Seat with harness straps loose or unbuckled.
Harness straps MUST be snug and positioned over shoulders and thighs of child.
• DO NOT dress your child in bulky clothing or other garments that will hinder the harness from being properly latched between your child’s legs and belts being snugly adjusted around your child.
In a crash, the Car Seat provides NO protection for your child unless the harness straps are properly secured and installed according to these instructions. Make sure that the harness straps are properly adjusted and secured whenever using the Car Seat.
IMPORTANT: Adjust the harness snugly every time you place your child in the Car Seat and
AVOID bulky clothing. Both the harness height and crotch belt length are adjustable. Always properly adjust to fit your child as indicated in this section.
48-1
1. Loosen harness straps by pressing the
Harness Adjuster Button and pulling the harness straps toward you. (Fig 48-1)
2. Open Harness Clip by pressing button and sliding apart. (Fig 48-2)
48-2
48
11.0
Harness System Use and Adjustment
11.0
Harness System Use and Adjustment
3. Unbuckle Harness Buckle by pressing button and sliding buckle tongues up and out of buckle. (Fig 49-1)
4. Place your child in the Car Seat so that the child’s bottom is against the back and bottom of the seat. (Fig 49-2)
49
Correct Incorrect
49-2
5. Check that the harness straps are located at the proper height for your child. The proper height of the harness straps is at or just below your child’s shoulders. (Fig 49-3) (see Section
11.2 Adjusting Harness Strap Height)
6. Place harness straps over child’s shoulders and put the two buckle tongues together, overlaying the left buckle tongue onto the right buckle tongue, and insert the two joined buckle tongues into the harness buckle until they click into place.
Note: Pull up on tongues to make sure that
BOTH tongues click into place. (Fig 49-4)
Press
49-1
49-3
49-4
7. Check buckle height - The Crotch
Strap should be adjusted so that a gap of 12.5 mm to 25 mm (1/2” to 1”) is present between the ears of the buckle and the top of child’s thigh (Fig 50-1), disregarding any clothing or diaper. If buckle is too low or to high, adjust height. (see
Section 11.3 Adjusting Crotch
Strap Length) buckle thigh
8. Check that the straps are not twisted and lie flat over the shoulders.
9. Tighten the harness straps to snugly adjust harness around child by pulling the Harness Adjuster Strap at the front of the Car Seat as shown. (Fig 50-2)
10. Connect the Harness Clip and position the Harness Clip at the middle of the child’s chest, level with the armpits.
50-1
50-2
12. Check Harness Straps - Make sure the straps are flat and snug against the child’s shoulders and thighs.
NOTE: A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.
50
11.0
Harness System Use and Adjustment
11.0
Harness System Use and Adjustment
Removing Your Child from Harness System
1. Open Harness Clip by pressing button and sliding apart.
2. Unbuckle the Harness Buckle by pressing the red button.
3. Press the Harness Adjuster Button and pull outward on the straps to loosen.
4. Slide the harness straps off the child’s shoulders and arms.
5. Remove your child.
- Knob must remain in vertical position after adjustment. (Fig 52-1) DO NOT use the Car Seat with the Harness adjusted above the child’s shoulders as the child will not be held securely in a sharp turn, sudden stop, or crash.
Knob handle must be vertical
52-1
11.2 Adjusting Harness Strap Height
11.2.1 Car Seat with Adjustable Back
The Car Seat includes a sliding Adjustable Back that will adjust the height of the harness straps as the back is adjusted.
51
1. The proper height of the harness straps is at or just below your child’s shoulders.
2. Rotate the knob behind the seat back to raise or lower the moving seat back and harness straps.
- To adjust the seat back height, turn the moving back adjuster knob behind the seat clockwise to increase the seat back height and counter clockwise to decrease the seat back height.
Each half turn will raise or lower the slots 12.5 mm (1/2”).
11.3 Adjusting the Crotch Strap Length
The crotch strap length should be adjusted such that a gap of
1/2” to 1” is present between the ears of the buckle, and the top of the child’s thigh, disregarding any clothing or diaper (Fig 52-2).
Your child will grow very quickly so always check that the buckle is the proper height whenever placing your child in the Car Seat.
The crotch strap length is adjusted as follows: buckle thigh
52-2
52
53
11.0
Harness System Use and Adjustment
11.0
Harness System Use and Adjustment
1. Lift up on the crotch strap pad and you will see the crotch strap anchor clip riding in a slot in the crotch strap cavity in the car seat shell.
Pull outward on the metal clip, while feeding the crotch strap webbing downward, until the crotch strap metal clip is removed from the slot.
DO NOT attempt to completely remove the crotch strap from the Car Seat. (Fig 53-1)
2. Adjust the length of the Crotch Strap to the desired length. For small children, the length of the Crotch Strap is shortened by wrapping additional strap material around the metal clip.
For larger children, the length is increased by unwrapping material from around the metal clip. (Fig 53-2)
3. Reinsert the Crotch Strap metal clip into the slot in the Crotch Strap cavity while pulling upward on the Crotch Strap buckle. Check that the Crotch Strap metal clip is completely seated all the way down in the slots before using the
Car Seat. (Fig 53-3)
4. Push the Crotch Strap buckle back up through the slot in the Seat Pad and return the Seat Pad to its original position on the seat shell.
53-1
53-2
53-3
11.4 Adjust Seat Recline Angle
WARNING!
• FAILURE TO PROPERLY RECLINE THE CAR SEAT ON THE
VEHICLE SEAT INCREASES THE RISK OF DEATH OR
SERIOUS INJURY.
• PROPER RECLINE ANGLE FOR SEAT BACK RECLINE IS
REQUIRED. FOLLOW THE INSTRUCTIONS FOR ADJUSTING
RECLINE ANGLE USING SEAT ANGLE INDICATOR.
- TOO UPRIGHT CAN CAUSE A YOUNG INFANT’S HEAD
TO FALL FORWARD AND RESTRICT BREATHING.
- TOO RECLINED CAN CAUSE EJECTION IN A SUDDEN STOP
OR CRASH
For your child’s safety, the Car Seat must be properly reclined when installed in the vehicle. The Car Seat includes a Seat Angle Indicator on the lower portion of the shell on the child’s left side, to assist in achieving the proper angle of recline for the Car Seat.
1. Park your vehicle on a level surface so that the Seat Angle Indicator located on the left side of the Car Seat will properly indicate the proper angle of recline of the seat.
54
55
11.0
Harness System Use and Adjustment
11.0
Harness System Use and Adjustment
Car Seat with Base:
• Place Base on vehicle seat and lock car seat onto base. Check that the car seat is level side to side. (Fig 55-1)
• Check the Seat Angle Indicator that matches the weight of your child. (Fig 55-2)
• If the Seat Angle Indicator shows NO pink, the seat is installed at the proper seat recline angle.
• If the Seat Angle Indicator shows ANY pink, the Car Seat is either too upright or too reclined. If the seat is too upright, extend the foot one position at a time just until no pink shows. To extend the foot of the base, pull downward on the hand hold as shown in
(Fig 55-3) while holding onto the base. To retract the foot, press inward on the Foot
Adjustment Lock Button as shown in
(Fig 55-4) and push upward on the foot. Be careful not to pinch your finger as the foot retracts.
Re-tighten the vehicle seat belt. Check the
Seat Angle Indicator to see if the seat is now level (no pink showing).
55-1
10 kg
(22 lbs./livres) and
under
10 to
14.5 kg
(22 to 32 lbs./livres)
55-2
55-3
Car Seat without Base:
• Place car seat onto vehicle seat. Check that car seat is level side to side. (Fig 56-1)
• Check the Seat Angle Indicator that matches the weight of your child. (Fig 56-2)
• If the Seat Angle Indicator shows NO pink, the seat is installed at the proper seat recline angle.
• If the Seat Angle Indicator shows ANY pink, the Car Seat is either too upright or too reclined. If the Car Seat is too reclined adjust the Car Seat as shown in (Fig 56-3) until the
Seat Angle Indicator shows NO pink. If the
Car Seat is too upright, place a tightly rolled towel, or car seat solid noodle, under the foot end of the Car Seat until the Seat Angle
Indicator shows NO pink. (Fig 56-4)
Re-tighten the vehicle seat belt. Check the
Seat Angle Indicator to see if the seat is now level (no pink showing).
56-1
10 kg
(22 lbs./livres) and
under
10 to
14.5 kg
(22 to 32 lbs./livres)
56-2
56-3
Foot Adjustment
Lock Button
55-4 56-4
56
57
12.0
Final Safety Check
12.0 FINAL SAFETY CHECKS
1. If your child is already in the Car Seat, check that the harness is properly fitted and snugly adjusted as instructed in the section 11.1
Securing Your Child with Harness System.
2. Check that UAS connectors are securely attached and UAS belt or vehicle seat belt is tightly adjusted around base.
3. Remove any toys or other objects attached to carry handle.
4. Adjust carry handle into desired adjustment position. The storage position is the preferred position for use in a vehicle.
13.0 ADDITIONAL INFORMATION
13.1 Care & Maintenance
Vehicle seat: Use a child restraint mat, towel or other cloth to protect vehicle seat upholstery. Continuous use of a child restraint may cause damage to an unprotected vehicle seat.
Car Seat – Plastic and Metal components: Clean with mild soap and cold water. DO NOT use bleach or harsh detergents.
Buckle Adjuster and UAS Connectors: Wipe clean with damp cloth ONLY.
If buckle/UAS connectors will not securely lock, DO NOT use this child restraint. DO NOT use lubricants of any kind on any of the components of the Car Seat and Base, including the buckle and UAS system.
Harness Straps: Spot clean with damp cloth or replace. DO NOT immerse straps in water. The straps may weaken and not perform as designed.
13.0
Additional Information
Seat Pad and Head Support Pad: For care and maintenance, read and follow instructions on fabric tags.
To remove Seat Pad / Head Support Pad:
1. Remove the harness shoulder straps from the Car Seat.
2. Loosen the harness straps by depressing the
Harness Adjuster Button located below the flap just ahead of the Harness Buckle and pulling on the harness straps. (Fig 58-1)
3. Move Head Support into highest position to remove and re-thread harness straps.
4. Turn the seat over. Locate the Belt Adjuster
Plate near the bottom of the seat. (Fig 58-2)
Remove both Harness Straps from the Belt
Adjuster Plate. From the front of the seat, pull the Harness Straps through the shoulder area slots and seat pad.
5. Unthread the shoulder strap from the
Harness-tie and Buckle Tongues, leaving the Buckle Tongues in the Buckle. Be sure to note how they are threaded to assist in reassembling.
6. Carefully remove the Head Support Pad then adjust the Adjustable Back to its lowest position.
7. Carefully remove the Seat Pad, do not unthread the lower portion of the harness from the Car Seat.
8. For care and maintenance see fabric tag.
58-1
A
B
A
B
58-2
58
13.0
Additional Information
WARNING!
• DO NOT use the Car Seat Without the Seat Pad.
To install Seat Pad / Head Support Pad:
1. Reinstall Seat Pad /Head Support Pad on
Car Seat only when fabric is completely dry.
Harness-Tie
2. Place Seat Pad on Car Seat then place the Head Support Pad, thread the Harness straps through the Seat Pad bottom slots and pulling the Buckle through the opening at the rear of the flap on Pad. Thread the Harness Straps through Buckle
Tongues and Harness-Tie. (Fig 59-1) Buckle Tongues
59-1
3. Move Head Support into highest position to re-thread harness straps.
4. Use the included Belt Threading Tool and thread the Harness straps through the slots in the
Seat Pad and Head Support Pad. (Fig 59-2)
59
5. From the rear of the Car Seat, pull the Harness Straps through the Slots
Belt Threading Tool
59-2
13.0
Additional Information until you have enough strap to reach the Belt Adjuster Plate. (Fig 60-1)
6. Reassemble the Harness Straps to the Belt
Adjuster Plate. Do the left Harness Strap first, followed by the right Harness Strap.
Check that Harness Straps are completely within the Belt Adjuster Plate loop (Fig 60-2). You have two adjustment positions on the harness.
Use Position A for a smaller child, and Position B for a larger child. If using Position A, loop B must be on top of the Belt Adjuster Plate. (Fig 60-3)
A A
B
60-1
A
B
A
B
60-2 60-3
7. Inspect the Harness Straps from the front and rear to ensure that they are not twisted. Twisted straps can prevent proper tightening of the Harness and thus may not adequately restrain your child in a sharp turn, sudden stop or crash.
Before using the Car Seat, please pull on the Harness Straps from the front to ensure that they are securely re-attached.
60
13.0
Additional Information
13.2 Using Your Car Seat with a Baby Trend Stroller
Please see the stroller owner’s manual for information on the use of the
Car Seat with the Baby Trend stroller.
13.3 Airplane Use
This child restraint is certified for use in Aircraft ONLY without the base.
This Car Seat must be secured without the Base in an airplane in the same manner as it is used in an automobile. See Section 10.6
Car Seat Only Installation without Base. Please check with the airline in advance to determine their policies regarding the use of Car Seats aboard the airplane. The Car Seat must be used in only a forward facing airplane seat. Please ask the flight attendant for assistance in placement of the Car Seat. Please follow these instructions for proper installation and perform the Final Safety
Check as instructed in Section 12.0 Final Safety Check.
61
13.4 Replacement Parts
If You Need Help or Replacement Parts, please call our
Customer Service Department at 1-800-328-7363 between the hours of 8:00 am and 4:30 pm, Pacific Standard Time, Monday through Friday or visit us online at www.babytrend.com
13.0
Additional Information
13.5 WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE
STORE. PLEASE CONTACT BABY TREND FOR
REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend ® warranty covers workmanship defects within the first 180 days of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user. The Customer Service Department can be contacted at 1 (800) 328-7363 Monday through
Friday between 8:00am and 4:30 pm (PST). Return
Authorizations are required prior to returning product(s) to Baby Trend ® . Warranty only valid in North America.
62
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement