Xerox 230 LP Document Centre Installation Guide

Add to my manuals
2 Pages

advertisement

Xerox 230 LP Document Centre Installation Guide | Manualzz

7 +( ' 2&80(17 & 203$1<

DC230LP Banyan VINES

®

Quick Install

Installation Requirements:

Ensure that the PCPrint option has been installed and configured on your VINES server.

Before Installation:

Use the Banyan VINES MANAGE utility to:

• Create a StreetTalk Name and Password for the DC230LP.

• Create a Print Service Name for the

DC230LP.

• Set the Destination to the StreetTalk Name.

The Destination Type for the DC230LP should be set to PCPRINT.

Record the following information for use during setup at the DC230LP:

StreetTalk Name: ________________________

StreetTalk Password: _____________________

Print Service Name: ______________________

This installation procedure assumes that you know how to navigate through the menu system on the DC230LP Control Panel. Refer to the quick reference card,

Using the Menu System,

(701P96834) for assistance.

1.

Connect the DC230LP to your network outlet or cable.

2.

Access the System Administration menus: a) Press [Online] to take the printer off line.

Printer Off Line

displays.

b) Main Menu

Press [Menu]. displays.

c) ] or [ ] until

System

Administration

>

displays.

d) Press [ ].

Enter Password

>

displays.

e) Use the [ ] and [ ] keys to enter

[2222].

Note: 2222 is the factory default password and may be changed to suit your needs. Refer to the

DC230LP System Administration Guide,

Network Installation and Troubleshooting

.

f) Press [Enter].

System Admin displays.

>

3.

Access the Banyan VINES setup: a) Press [ ].

Port Setup

>

displays.

b) Press [ ] until

Network Setup displays.

> c) Press [ ].

TCP/IP

>

displays.

> d) Press [ ] until

Banyan displays.

4.

Enable Banyan VINES: a) Press [ ].

Enablement

Disabled

>

displays.

b) Press [ ].

Enablement

Disabled

=

* displays.

c) Press [ ].

Enablement

Enabled

displays.

d) Press [Enter]. **SAVED** is displayed momentarily, followed by

Enablement

Enabled

>

.

For assistance, contact your local Xerox Customer Support Center:

USA: 1-800-821-2797 Canada: 1-800-939-3769

Page 1 of 2

Over

7 +( ' 2&80(17 & 203$1<

DC230LP Banyan VINES

®

Quick Install

5.

Enter the StreetTalk name: a) Press [ ] until

StreetTalk Name

(current entry)

> displays.

b) Press [ ].

StreetTalk Name =

(current entry) *

displays.

c) Press [ ] repeatedly until the cursor reaches the end of the entry. A tone sounds indicating when the last character has been reached.

d) Press [ ] repeatedly to delete the current entry.

e) Use the [ ] or [ ] key to select the first character in the Print Server

Name.

f) Press [ ] to move to the next character. Repeat this procedure to enter the entire Print Server Name.

g) Press [Enter]. **SAVED** is displayed momentarily, followed by

StreetTalk Name

(your entry)

>

.

6.

Enter the StreetTalk Password: a) Press [ ] until

StreetTalk Pswd

****************

> displays.

b) Press [ ].

StreetTalk Pswd =

**************** *

displays.

c) Press [ ] repeatedly until the cursor reaches the end of the entry. A tone sounds indicating when the last character has been reached.

d) Press [ ] repeatedly to delete the current entry.

e) Use the [ ] or [ ] key to select the first character in the StreetTalk password.

f) Press [ ] to move to the next character. Repeat this procedure to enter the entire StreetTalk password.

g) Press [Enter]. **SAVED** displays momentarily, followed by

StreetTalk Pswd

****************

>

.

7.

Enter the Print Service name: a) Press [ ] until

Print Service

(current entry) displays.

> b) Press [ ].

Print Service =

(current entry) *

displays.

c) Press [ ] repeatedly until the cursor reaches the end of the entry. A tone sounds indicating when the last character has been reached.

Page 2 of 2 d) Press [ ] repeatedly to delete the current entry.

e) Use the [ ] and [ ] keys to enter the entire Print Service name. f) Press [Enter]. **SAVED** is displayed momentarily, followed by

Print Service

(your entry)

>

.

8.

Save all the settings: a) Press [Online].

Reset Required

Press ENTER key displays.

b) Press [Enter].

Warming Up

Please Wait . . .

> displays. The DC230LP will reboot, save the settings entered, and print a

Configuration Report in approximately

3 minutes.

9.

Check the settings on the Configuration

Report against those entered in MAN-

AGE. The StreetTalk password does not appear on the Configuration Report.

10.

At the client, install print drivers and map the printer in the usual manner. For additional information, refer to the Centre-

Ware

®

manual,

Getting Started with Print and Fax Services,

and the

DC230LP

System Administration Guide, Network

Installation and Troubleshooting

.

©1998 Xerox Corporation

701P98452 Version 1.0, 5-98

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement