Xerox 8560 Phaser Administration Guide

Add to my manuals
117 Pages

advertisement

Xerox 8560 Phaser Administration Guide | Manualzz

Office Printers

P h a s e r ® 6 3 6 0 c o l o r l a s e r p r i n t e r

P h a s e r ® 8 5 6 0 c o l o r p r i n t e r

System

Administrator

Guide

www.xerox.com/support

Copyright © 2007 Xerox Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United

States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation.

Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.

XEROX

®

, CentreWare

®

, Phaser

®

, PhaserShare

®

, PhaserSMART

®

, PrintingScout

, and Walk-Up

™ are trademarks of Xerox

Corporation in the United States and/or other countries.

Adobe

®

and PostScript

®

are trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Apple

®

, AppleTalk

®

, Bonjour

, EtherTalk

®

, Macintosh

®

, and Mac OS

®

are trademarks of Apple Computer, Inc. in the United

States and/or other countries.

PCL

® is a trademark of Hewlett-Packard Corporation in the United States and/or other countries.

Windows

®

, Windows NT

®

, and Windows Server

are trademarks of Microsoft Corporation in the United States and/or other countries.

Sun SM , Sun Microsystems

, and Solaris

®

are trademarks of Sun Microsystems, Incorporated in the United States and/or other countries.

UNIX

®

is a trademark in the United States and other countries, licensed exclusively through X/Open Company Limited.

Contents

1 Overview

Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

PrintingScout Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

PhaserSMART Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

How to Access PhaserSMART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Xerox Support Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

CentreWare Internet Services (IS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

2 Network Installation Features

Using a Startup Network Configuration File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

About the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Configuration File Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Specifying the Location of the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Printer Driver Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Walk-Up Printing Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Walk-Up Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Installation from the Printer’s Hard Drive or the Web . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Auto-Configuring Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Discovery Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

DDNS/WINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

DNS (Domain Name Services) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Service Location Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

UPnP (Universal Plug and Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

3 Network Administration Features

Printer Neighborhood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Job Accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Usage Profile Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Setting Up Usage Profile Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Sending Usage Profile Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Xerox Usage Analysis Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

System Administrator Guide i

Contents

Protocol Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

HTTP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

TCP/IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Port 9100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

LPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

IPP (Internet Printing Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

SNMP (Simple Network Management Protocol) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

FTP (File Transfer Protocol). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Email Server or SMTP (Simple Mail Transfer Protocol. . . . . . . . . . . . . . . . . . . . . . 3-10

MaiLinX Remote Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

MaiLinX Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

EtherTalk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Cloning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

4 Security Features

Basic Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

About Admin and Key User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

About HTTP, HTTPS, and SSL/TLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

About Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

About Access Control Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Securing the Printer in a High Security Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Setting Up a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Configuring SSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Configuring Administrator and Key User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Configuring the Print Host Access List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Controlling Access to Color Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Securing the Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Selecting the Hard Drive Overwrite Security Option . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Selecting the Automatic Removal of Secure, Personal, and Proof Jobs Option. . . . 4-12

802.1X Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Introduction to 802.1X and EAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

802.1X Configuration in CentreWare IS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Locking the Control Panel Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Configuring SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

Configuring SNMP for Maximum Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

Configuring SNMP v1/v2c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Configuring SNMP v3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

Configuring the SNMP Access Control List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Disabling SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23

System Administrator Guide ii

Contents

5 Printing Features

Secure, Personal, Personal Saved, Proof, Print With and Saved Print Jobs . . . . . . . . . . . . . 5-2

Smart Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Jam Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

6 Glossary

Terms and Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

A Configuration Card Parameters

General Information Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

PostScript Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

PCL Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

USB 2.0 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Hard Drive Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Network Information Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

PhaserShare Series B Interface for Ethernet Network Parameters . . . . . . . . . . . . . . . . . . . . A-3

Certificates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

802.1x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

EtherTalk Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

TCP/IP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

DNS Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

SLP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

SSDP Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

NBNS (WINS) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Access Control Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

LPR Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

AppSocket (Port 9100) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

IPP (Internet Printing Protocol) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

SNMP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

CentreWare IS (HTTP) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

System Administrator Guide iii

Contents

FTP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Status Notification Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

MaiLinX Remote Printing Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

B Printer Commands

Phaser PCL Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Media Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Media Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Input Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

Output Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

Phaser PJL Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

C Acknowledgements

Index

System Administrator Guide iv

Overview

This section includes:

Resources on page 1-1

PrintingScout Alerts on page 1-2

PhaserSMART Technical Support on page 1-2

Xerox Support Centre on page 1-4

CentreWare Internet Services (IS) on page 1-5

You can obtain information regarding your printer and its capabilities from the following sources.

Resources

Information

Installation Guide*

Quick Use Guide*

User Guide (PDF)*

Advanced Features Guide (PDF)

Quick Start Tutorials

Video Tutorials

Recommended Media List

Printer Management Tools

Knowledge Base

PhaserSMART

Technical Support

Information about menu selection or error messages on control panel

Information pages

* Also available on the Support website.

Source

Packaged with printer

Packaged with printer

Software and Documentation CD-ROM www.xerox.com/support www.xerox.com/support www.xerox.com/support www.xerox.com/paper (US version) www.xerox.com/paper (European version) www.xerox.com/office/pmtools www.xerox.com/support www.phaserSMART.com

www.xerox.com/support

Control panel Help ( ?

) button

Control panel menu

System Administrator Guide

1-1

PrintingScout Alerts

PrintingScout Alerts

PrintingScout is an automated tool that is installed with the Xerox printer driver. It automatically checks the printer status when a print job is sent. If the printer is unable to print a job, PrintingScout automatically displays an alert on the user’s computer screen to let them know that the printer needs attention. The user can click the alert to view instructions explaining how to fix the problem. PrintingScout provides real-time support to users, while eliminating many of the help calls requesting printer support. PrintingScout saves you time for more critical tasks.

PhaserSMART Technical Support

PhaserSMART Technical Support is an automated, internet-based support system that uses the user’s default web browser to send diagnostic information from their printer to the Xerox website for analysis. PhaserSMART Technical Support examines the information, diagnoses the problem, and proposes a solution. If the problem is not resolved with the solution,

PhaserSMART Technical Support assists the user in opening a Service Request with Xerox

Customer Support.

PhaserSMART provides support to users, while eliminating many of the help calls requesting printer support. PhaserSMART Technical Support saves you time for more critical tasks.

How to Access PhaserSMART

Use one of the following options to access PhaserSMART Technical Support:

PrintingScout

Web

CentreWare IS

The printer driver

Xerox Support Centre

Using PrintingScout Software

If PrintingScout displays an alert on your screen, do the following:

1.

Click the alert to view instructions explaining how to fix the problem.

2.

Follow the instructions on the screen.

Using a Web Browser

To access PhaserSMART Technical Support from the web:

1.

Open your browser and go to www.phaserSMART.com

.

2.

Enter your printer’s IP address in the browser window.

3.

Follow the instructions on the screen.

System Administrator Guide

1-2

PhaserSMART Technical Support

Using CentreWare IS

To access PhaserSMART Technical Support from CentreWare IS:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click the Support tab.

4.

Select the PhaserSMART Diagnostic Tool link.

5.

Follow the instructions on the screen.

Using a Windows Printer Driver

To access PhaserSMART Technical Support from your printer driver:

1.

Select Start , select Settings, and then select Printer and Faxes .

2.

Right-click the printer name, and then select Properties .

3.

Select the Troubleshooting tab.

4.

Select the PhaserSMART Technical Support link.

5.

Follow the instructions on the screen.

Using the Xerox Support Centre

To access PhaserSMART Technical Support from the Xerox Support Centre:

1.

Select one of the following options:

Windows : Double-click the Xerox Support Centre icon on your desktop.

Macintosh : Click the Xerox Support Centre icon in the dock.

2.

Select your printer from the Select Printer drop-down list.

3.

Select the Solutions tab.

4.

Select the Advanced Solutions link.

5.

Select the Technical Support link.

6.

Click the PhaserSMART icon.

See also:

Xerox Support Centre on page 1-4

System Administrator Guide

1-3

Xerox Support Centre

Xerox Support Centre

The Xerox Support Centre is a utility that is installed when running the driver installer. It is available for systems with Windows 2000 and later or Mac OS X, version 10.2 and higher.

The Xerox Support Centre appears on the desktop for Windows systems or is placed in the

Mac OS X dock. It provides a central location for accessing the following information:

User manuals and video tutorials

Solutions to troubleshooting problems

Printer and supplies status

Supplies ordering and recycling

Answers to frequently asked questions

Default printer driver settings (Windows only)

Note: Xerox recommends that the Xerox driver installer be used to add a printer instead of the

Microsoft Add Printer Wizard. If the Microsoft Add Printer Wizard is used, the Xerox Support

Centre is not installed on the PC. Also, the Xerox driver installer installs the Xerox printer driver, enabling users to work more efficiently by accessing printer features and resources to solve simple problems. This eliminates many of the help calls requesting printer support, saving you time for more critical tasks.

To start the Xerox Support Centre utility:

1.

Select one of the following options:

Windows : Double-click the Xerox Support Centre icon on your desktop.

Macintosh : Click the Xerox Support Centre icon in the dock.

2.

Select your printer from the Select Printer drop-down list.

System Administrator Guide

1-4

CentreWare Internet Services (IS)

CentreWare Internet Services (IS)

CentreWare IS provides a simple interface that enables you to manage, configure, and monitor networked printers from your desktop using an embedded web server. CentreWare IS gives administrators easy access to printer status, configuration, and diagnostic functions. It also provides users with access to printer status and special printing functions such as printing saved jobs. With CentreWare IS software, you can access and manage your printers over a

TCP/IP network using a web browser.

CentreWare IS enables you to:

Check supplies status from your desktop, saving a trip to the printer. Access job accounting records to allocate printing costs and plan supplies purchases.

Define a network printer search and view a list of printers using Printer Neighborhood.

The list provides current status information and allows you to manage printers independent of network servers and operating systems.

Configure printers from your desktop. CentreWare IS makes it easy to copy settings from one printer to another.

Define network, administration, and security features for a network printer.

Set up and use a simple web-browser-based printing system. Marketing collateral, sales materials, business forms, or other standardized, frequently used documents can be saved as a group with their original driver settings then reprinted on demand at high speed from any user's browser. A printer with a hard drive is required to support these functions. In some printer models, a DX configuration is required to support these functions.

Troubleshoot print-quality problems using built-in diagnostics.

Define a link to your local web server’s support page.

Access online manuals and technical support information located on the Xerox website.

Note: CentreWare IS requires a web browser and a TCP/IP connection between the printer and the network (in Windows, Macintosh, or UNIX environments). TCP/IP and HTTP must be enabled in the printer. JavaScript is required to access the pages in Printer Neighborhood. If

JavaScript is disabled, a warning message appears and the pages do not function properly.

To access CentreWare IS:

1.

Launch your web browser.

2.

Enter you printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

For complete information about CentreWare IS, click the Help button in CentreWare IS to go to the CentreWare IS Online Help .

System Administrator Guide

1-5

Network Installation

Features

This chapter includes:

Using a Startup Network Configuration File on page 2-2

Printer Driver Installation Features on page 2-3

Discovery Protocols on page 2-5

See also:

Advanced Features Guide at www.xerox.com/support

System Administrator Guide

2-1

Using a Startup Network Configuration File

Using a Startup Network Configuration File

This section includes:

About the Configuration File on page 2-2

Configuration File Requirements on page 2-2

Specifying the Location of the Configuration File on page 2-2

About the Configuration File

To configure printer settings or to perform other tasks, such as loading fonts, color tables, and job patches, you can create a startup network configuration file. Every time the printer is turned on or reset, the TFTP service on the TFTP server downloads the configuration file once an IP address is acquired and confirmed in the printer. The TFTP service processes the data in the configuration file as if it were a standard print job.

Configuration File Requirements

The configuration file must be:

A valid PostScript or PCL file that contains the appropriate PostScript, PCL, or PJL commands. For a list of the Xerox-unique PCL and PJL commands, see Printer

Commands on page B-1.

Stored on a TFTP server that the printer can access over the TCP/IP network.

Specifying the Location of the Configuration File

To specify the location of the configuration file, do one of the following:

If the printer is connected to a TCP/IP network in a DHCP/BOOTP environment, use the

DHCP/BOOTP environment.

■ Use DHCP option 66 to specify the TFTP server IP address or hostname.

■ Use DHCP option 67 to specify the pathname of the configuration file.

For information on how to set these parameters, refer to your DHCP or BOOTP server documentation.

If the printer is connected to a TCP/IP network in a non-DHCP environment, use

CentreWare Internet Services (IS).

Using CentreWare IS

1.

Click the Properties tab and expand the Protocols menu.

2.

Select TCP/IP .

3.

Under TFTP Settings , set the following:

Enter the TFTP server IP address or hostname in the TFTP Server Name field.

Enter the pathname of the configuration file in the Boot File Name field.

4.

Click the Save Changes button.

For more information, see the CentreWare IS Online Help .

System Administrator Guide

2-2

Printer Driver Installation Features

Printer Driver Installation Features

This section includes:

Walk-Up Printing Driver on page 2-3

Walk-Up Installation on page 2-3

Installation from the Printer’s Hard Drive or the Web on page 2-4

Discovery Protocols on page 2-5

Walk-Up Printing Driver

The Xerox Walk-Up Printing Driver enables printing from a PC to any Xerox

PostScript-enabled printer. This is especially helpful for mobile professionals who travel to multiple locations and need to print to different printers. Instead of installing the printer drivers for each printer, you can download this driver from the web. Although it doesn’t enable access to all printer-specific features, it does enable access to common printing features, such as

2-sided printing.

The driver contains basic features that are common to most of the PostScript-enabled printers, including:

Portrait, landscape, and rotated landscape orientations

Single-sided or two-sided printing

Single or multiple pages per sheet (including booklet printing)

Paper or transparency printing

Page size selection

Note: For information about Xerox printer driver features that are available with specific operating systems, see Printer Driver Features in the Advanced Features Guide for your printer at www.xerox/support .

Walk-Up Installation

The Xerox Installer enables quick and easy installation of the printer driver. The installer is included on the Software and Documentation CD-ROM, supplied with the printer, and is available on the web. When you run the installer, the main screen lists the Xerox printers of that model discovered on the network or connected via USB. You can choose one of the discovered printers, enter the IP address of the desired printer, or use Walk-Up Technology.

This technology is especially helpful when there is more than one Xerox printer on the discovered printers list and you don’t know the printer’s IP address.

To use Walk-Up installation:

1.

Select Walk-Up Technology , and then click the Next button on the main installer screen.

2.

Walk up to the printer, select Walk-Up Features , and then Select for Installation .on the control panel.

The installer connects the computer to the printer, completes the driver installation, and then the printer prints a confirmation page.

System Administrator Guide

2-3

Printer Driver Installation Features

Installation from the Printer’s Hard Drive or the Web

You can install the printer driver from the printer’s hard drive. This is especially useful if you do not have the Software and Documentation CD-ROM .

Note: If the printer doesn’t have a hard drive but is connected to the internet, you can use this procedure to automatically connect to the web to install the driver.

To install the printer driver either from the hard drive or the web:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Support .

4.

Select Software Installation on the left navigation panel.

5.

Select the Printer Drivers link.

6.

Do one of the following:

If you are a Windows user, click Windows Driver Installer to install the driver, and then click the Install button to install the printer.

If you are a Macintosh user, click Macintosh Driver Installer to download the driver.

Auto-Configuring Driver

During installation, the bi-directional communication between the driver and a printer connected to a network identifies the printer’s configuration (N, DN, DX, etc.) and the features available with the configuration such as, duplexing capability, additional trays, or a hard drive.

The controls for settings, such as 2-sided printing, tray selection, and secure printing are displayed or hidden/grayed out, and the mimic displays the correct printer configuration. This driver feature prevents users from making incorrect selections during installation.

System Administrator Guide

2-4

Discovery Protocols

Discovery Protocols

This section includes:

DDNS/WINS on page 2-5

DNS (Domain Name Services) on page 2-6

Service Location Protocol on page 2-6

UPnP (Universal Plug and Play) on page 2-7

DDNS/WINS

DDNS/WINS settings can be obtained from the BOOTP or DHCP server, if enabled. These settings enable the printer to register its IP name and address so other devices on the network can refer to it by name.

To change the DDNS/WINS settings:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click the Properties tab.

4.

Click the Protocols folder on the left navigation panel.

5.

Select TCP/IP .

6.

If prompted, enter your Admin or Key User name and password.

7.

Under DDNS/WINS Settings select one of the following:

On

Off

: You can enter a DDNS/WINS Name and DDNS Domain Name.

: The values may be set by BOOTP/DHCP.

8.

If you selected On , follow the instructions on the page. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9.

Click the Save Changes button.

System Administrator Guide

2-5

Discovery Protocols

DNS (Domain Name Services)

DNS settings reference servers by name and allow you to enter and view host names rather than IP addresses.

Note: Turning Multicast DNS ON allows the printer to be automatically discovered on a

TCP/IP network by Apple Macintosh OS X Bonjour technology.

To change the DNS settings:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click the Properties tab.

4.

Click the Protocols folder on the left navigation panel.

5.

Select TCP/IP .

6.

If prompted, enter your Admin or Key User name and password.

7.

Follow the instructions on the page. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

8.

Click the Save Changes button.

Service Location Protocol

To change the configuration of the Service Location Protocol (SLP) Service Agent in the printer:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Click the Protocols folder on the left navigation panel.

5.

Select TCP/IP .

6.

If prompted, enter your Admin or Key User name and password.

7.

Under Service Location Protocol (SLP) Settings , in the SLP Enable field, select On or

Off .

8.

If you selected On , follow the instructions on the page. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9.

Click the Save Changes button.

System Administrator Guide

2-6

Discovery Protocols

UPnP (Universal Plug and Play)

UPnP provides a simplified method to obtain an IP Address for a printer, locate devices on the network, and display those devices on desktop computers.

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Click the Protocols folder on the left navigation panel.

5.

Select TCP/IP .

6.

If prompted, enter your Admin or Key User name and password.

7.

Under Universal Plug and Play (UPnP) Settings , in the Auto IP Enable field, select On or Off .

8.

Select On or Off for SSDP Enable :

■ On : will enable the printer to send and receive Simple Device Discovery Protocol announcements and requests.

Off : The printer will not issue nor respond to SSDP requests.

9.

Set the SSDP TTL value. This value specifies the multicast radius, often referred to as hop count or time-to-live , for SSDP. The valid range is between 0-255.

10.

Click the Save Changes button.

System Administrator Guide

2-7

Network

Administration

Features

This chapter includes:

Printer Neighborhood on page 3-2

Job Accounting on page 3-3

Usage Profile Reports on page 3-4

Xerox Usage Analysis Tool on page 3-5

Protocol Control on page 3-6

Cloning on page 3-14

System Administrator Guide

3-1

Printer Neighborhood

Printer Neighborhood

Printer Neighborhood is a tool in CentreWare IS that enables you to search for printers on your network, check their status, and manage them remotely. You can also install, manage, and view printer usage information. Access to the embedded server in each printer enables you to perform other management tasks.

The default printer search mode is Quick Phaser Search , which quickly finds the Phaser printers on your local subnet. To search for all types of printers or to change other defaults, click the Preferences tab.

Note: Javascript is required in order to access and use pages in Printer Neighborhood. If

Javascript is disabled, a warning message is displayed and the pages will not function properly.

To access Printer Neighborhood:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click the Printer Neighborhood button.

A list of network printers is displayed.

System Administrator Guide

3-2

Job Accounting

Job Accounting

The printer stores information about print jobs. This information is stored in a log file, which lists job records. Each job record contains fields such as user name, job name, pages printed, job times, and toner or ink used. Not all fields are supported by all printers. For more information about the fields supported, go to the CentreWare IS Online Help or

CentreWare Web Online Help .

The actual values reported can vary depending on the protocol and printer driver being used when each job was printed. For example, using NPRINT over NetWare provides the printer with the most information about the job being printed. When using Windows and NetWare, the job name is often LST: or LST:BANNER. Other jobs from other ports may provide even less information about the job.

The log file is stored either in the printer’s RAM memory or on the hard drive if one is installed in the printer. Xerox recommends that a hard drive be used for job accounting.

With a hard drive, the printer can store information about 5000 print jobs. The data in the log file is saved when the printer is turned off or reset.

Without a hard drive, the printer can store information about the most recent 500 print jobs. The data in the log file is not saved when the printer is turned off or reset.

Note: Data in job accounting records may be a security risk because the names of users, as well as the titles, date, time, and length of printed jobs can be exposed. The content of print job pages is not stored in the job accounting system.

Job accounting can be enabled or disabled through CentreWare IS and CentreWare Web.

To access job accounting information using CentreWare IS:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Jobs .

The Job Accounting Links page provides links that enable you to browse, download, clear, or disable job accounting records. For complete information on CentreWare IS job accounting, including clearing job information, downloading job information to a file, and job accounting file formats, click the Help button in CentreWare IS to view the online help.

To access CentreWare Web, go to www.xerox.com/office/pmtools .

To Enable or Disable Job Accounting

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click the Properties tab.

4.

Select Printer Security Settings on the left navigation panel.

5.

In the Job Accounting field, enabled is checked by default. To disable all job accounting uncheck the enabled check box.

6.

Click the Save Changes button.

System Administrator Guide

3-3

Usage Profile Reports

Usage Profile Reports

Usage Profile reports provide information on many aspects of printer usage, such as ink or toner used, number of pages printed, and paper types used, gathered during the life of the printer. From this page you can view or print a report, and also send it to an email address you enter below, or to users who are specified in the Usage Profile Properties page.

Setting Up Usage Profile Reporting

To set up usage profile reporting:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Jobs .

4.

Select Usage Profile Reports on the left navigation panel.

5.

Click the Usage Profile Properties link.

6.

Follow the instructions on the page to set up reports. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

7.

Click the Save Changes button.

Sending Usage Profile Reports

To send a usage profile report:

1.

Launch your web browser.

2.

Enter the printer’s IP address in your browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Jobs .

4.

Select Usage Profile Reports on the left navigation panel.

5.

Enter the desired email address in the Send to Specific Address field.

6.

Click the Send Usage Profile Report button.

Note: To send usage profile reports using email, MaiLinX must be properly set up. See

MaiLinX Remote Printing on page 3-11.

System Administrator Guide

3-4

Xerox Usage Analysis Tool

Xerox Usage Analysis Tool

The Xerox Usage Analysis Tool (UAT) enables you to collect and analyze enterprise-wide

Xerox network printer usage data with customizable features:

Cost Analysis : Track printing costs by groups of users or by groups of printers.

Print Job Analysis : Analyze print jobs to review media type, color coverage, paper source, and other job specifics. Plan your next consumable order based on prior usage.

Printer Usage Analysis : Track printer usage patterns to identify printers that are underworked or overused.

Reports : Collect and present printer data in a number of formats with complete transaction and summary reports designed for Excel or other custom billing systems.

Note: Job accounting is enabled by default in the printer for the Usage Analysis Tool to be used. If job accounting is disabled, there are no records created in order for the Usage Analysis tool to function.

To ensure job accounting is enabled:

1.

Launch your web browser.

2.

Enter the printer’s IP address in your browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select Printer Security Settings .

6.

In the Job Accounting Record field ensure the box Enabled is checked.

For complete information about using the Xerox Usage Analysis Tool provided by the application’s online help system, go to www.xerox.com/office/uat .

System Requirements

IP network

Xerox printer with Ethernet interface (optional hard drive recommended)

Xerox Usage Analysis Tool client:

■ A PC with an Intel Pentium III processor or higher, at least 128 MB of RAM, and at least 500 MB of hard drive space recommended.

■ Operating systems supported: Windows 2000 Professional or later and Windows XP or later.

Xerox Usage Analysis Tool server:

■ A PC with an Intel Pentium III processor or higher, at least 256 MB of RAM, and at least 1 GB of hard drive space recommended.

■ Operating systems supported: Windows 2000 or later, Windows XP or later, and

Windows 2003 server or later.

Framework: .NET Framework 1.1 (included with the Xerox Usage Analysis Tool)

System Administrator Guide

3-5

Protocol Control

Protocol Control

This section includes:

HTTP on page 3-6

TCP/IP on page 3-7

Port 9100 on page 3-7

LPR on page 3-8

IPP (Internet Printing Protocol on page 3-8

SNMP (Simple Network Management Protocol) on page 3-9

FTP (File Transfer Protocol) on page 3-9

Email Server or SMTP (Simple Mail Transfer Protocol on page 3-10

MaiLinX Remote Printing on page 3-11

MaiLinX Alerts on page 3-12

See also:

Discovery Protocols on page 2-5

All network protocols, including network printing, printing services, printer discovery, and management protocols can be enabled or disabled on the printer. If a protocol is enabled, you can set configuration parameters.

Note: To secure protocols, disable any protocols you are not using. This prevents unauthorized access through applications that use these protocols. For example, if you want to use IPP for a secure printing channel, disable the other printing protocols, Port 9100 and LPR.

HTTP

By default, HTTP is enabled. For information on disabling HTTP, contact Xerox Technical

Support at www.xerox.com/support .

See also:

About HTTP, HTTPS, and SSL/TLS on page 4-3

System Administrator Guide

3-6

Protocol Control

TCP/IP

To change TCP/IP settings:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select TCP/IP .

6.

If prompted, enter your Admin or Key User name and password.

7.

In the BOOTP/DHCP box, select one of the following:

On

Off

: The printer issues BOOTP and DHCP requests on startup.

: The printer does not issue BOOTP or DHCP requests on startup.

8.

If you selected Off , follow the instructions in the TCP/IP Settings section to manually enter the printer’s TCP/IP information.

Enter the TFTP server IP address or hostname in the

Enter the pathname of the configuration file in the

TFTP Server Name

Boot File Name field.

9.

Under DDNS/WINS Settings , in the DDNS box, select one of the following: field.

On : The printer registers its IP name and address so other devices on the network can refer to it by name.

Off : The printer does not register its IP name and address. If DDNS is Off , these values may be set by BOOTP/DHCP if enabled.

10.

If you selected On , follow the instructions in DDNS/WINS Settings to manually enter settings to identify the printer. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

11.

Click the Save Changes button.

Port 9100

The Port 9100 protocol is also known as AppSocket, RAW, or Windows TCPmon.

To change Port 9100 settings:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select Port 9100 .

6.

If prompted, enter your Admin or Key User name and password.

7.

Select On or Off in the Port 9100 box.

8.

If you selected On , follow the instructions on the page to select Port 9100 settings. For more information, including a description of the fields, click the Help button in

CentreWare IS to view the online help.

9.

Click the Save Changes button.

System Administrator Guide

3-7

Protocol Control

LPR

LPR is an application-level printing protocol that uses TCP/IP to establish connections between printers and workstations on a network.

To change LPR settings:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select LPR .

6.

If prompted, enter your Admin or Key User name and password.

7.

Select On or Off in the LPR box.

8.

If you selected On , follow the instructions on the page to select LPR settings. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9.

Click the Save Changes button.

IPP (Internet Printing Protocol

IPP is an industry standard protocol for printing, as well as managing print jobs and media sizes, and supports authentication and encryption, making it a capable and secure printing solution. IPP is an IP-based protocol and can be used locally or over the internet.

Note: To configure IPP for secure/encrypted printing, specify a user name, password, and digest authentication (for Windows only). Every client that tries to print to the printer over IPP must enter this information. The user name and password are sent in plain text to the printer. If you specify digest authentication, the password is secured before it is sent to the printer.

To change IPP settings:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select IPP .

6.

If prompted, enter your Admin or Key User name and password.

7.

Select On or Off in the IPP (Internet Printing Protocol) box.

8.

If you selected On , follow the instructions on the page to select IPP settings. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9.

Click the Save Changes button.

System Administrator Guide

3-8

Protocol Control

SNMP (Simple Network Management Protocol)

SNMP is a set of protocols designed to help manage complex networks. SNMP-compliant devices store data about themselves in MIBs and return this data to the SNMP requesters. The

SNMP Configuration pages provide control over SNMP security, including methods to configure:

Administrative and Key User accounts with privacy and authentication protocols and keys associated with each account.

SNMP user account read or read/write access.

An access control list that limits SNMP access to the printer to specific hosts.

For information on configuring SNMP, see Configuring SNMP on page 4-17.

FTP (File Transfer Protocol)

FTP is a protocol for exchanging files over any network supporting the TCP/IP protocol, such as the internet or an intranet. You can use FTP to send print-ready files to the printer or to retrieve Job Accounting records from the printer.

To change FTP settings:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select FTP .

6.

If prompted, enter your Admin or Key User name and password.

7.

Select On or Off in the FTP box.

8.

If you selected On , follow the instructions on the page to select FTP settings. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9.

Click the Save Changes button.

Retrieving the Job Accounting file via HTTP or FTP

To access the job accounting file via FTP:

1.

Connect to your printer via FTP using the following command FTP Printer_IP_Address .

2.

Type get jobacct.log

to retrieve the job accounting file.

Note: The files on the printer cannot be displayed using the dir/Iscommands

To access the job accounting file via HTTP:

1.

Enter http://Printer_IP_Address/jobacct.dat

in your web browser.

System Administrator Guide

3-9

Protocol Control

Email Server or SMTP (Simple Mail Transfer Protocol

The Email server settings page enables you to configure email server settings and to specify a return email address for undeliverable email.

You can configure email server settings in CentreWare IS by either:

Automatically identifying the SMTP email server (recommended).

Manually specifying the SMTP email server.

You can also specify a return email address for undeliverable email, such as MaiLinX alerts and usage profile reports, to your email address.

To configure email server settings:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select Email Server .

6.

If prompted, enter your Admin or Key User name and password.

7.

Do one of the following:

To automatically identify the SMTP email server, click the Use DNS to Identify

SMTP Server (Automatic) option, and then enter the Primary Name Server IP

Address and the Secondary Name Server IP Address using the 4-byte IP address of the email server.

To manually specify the SMTP email server, click the Specify SMTP Server

Manually option, and then enter the information for the email server. Set the 4-byte IP address of the SMTP Email Server to send alert notifications. If there is no DNS server, then only the IP Address is allowed.

8.

(Optional) To specify an email address for returning undeliverable email, enter your email address in the Return Email Address field.

9.

Click the Save Changes button.

See also:

MaiLinX Alerts on page 3-12

Usage Profile Reports on page 3-4

System Administrator Guide

3-10

Protocol Control

MaiLinX Remote Printing

MaiLinX Remote Printing provides the following key features:

The ability to send print jobs to a group of printers.

Print services across firewalls and proxies.

Status reporting using email messages.

MaiLinX Remote Printing consists of two parts:

Client software installed on each user’s workstation or PC enables users to send print jobs from Windows applications to Xerox printers over the Internet. The client software enables users to set up their Internet-connected printers and create groups and subgroups of printers for easy distribution of print jobs.

A CentreWare IS Printing Service on a Xerox printer processes the print jobs from the clients.

System Requirements

The client software requires an SMTP-capable email server/forwarder through which the client software on the user’s computer can send email.

Each printer requires an account on a POP3-capable email server from which it can retrieve email.

Setting Up MaiLinX Remote Printing

To set up your printer for remote printing:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select Remote Printing .

6.

If prompted, enter your Admin or Key User name and password.

7.

Set the MaiLinX Remote Printing box to On . Follow the instructions on the MaiLinX

Remote Printing page to set up your printer for remote printing. For more information including a description of the fields, click the Help button in CentreWare IS to view the online help.

System Administrator Guide

3-11

Protocol Control

MaiLinX Alerts

About MaiLinX Alerts

MaiLinX alerts enable the printer to automatically send email to you and/or specified users when the following conditions occur:

The printer requires attention or when service is needed.

The printer displays an error, warning, or alert.

A reply to a MaiLinX Remote Printing message is desired.

For more information, click the Help button in CentreWare IS to view the online help.

Setting Up MaiLinX Alerts

To enable MaiLinX alerts:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the General folder on the left navigation panel.

5.

Select Mail Alerts .

6.

If prompted, enter your Admin or Key User name and password.

7.

Select On in the MaiLinX (and Usage Profile Properties) box.

8.

Follow the instructions on the page to specify up to three users to receive messages:

Admin, Key User, and Service. You can also select advanced settings for:

Specifying email server settings.

Reading or changing default messages.

Reading or changing conditions and trigger settings.

9.

Click the Save Changes button.

System Administrator Guide

3-12

Protocol Control

EtherTalk

To change EtherTalk settings:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select EtherTalk .

6.

If prompted, enter your Admin or Key User name and password.

7.

Select On or Off in the EtherTalk box.

8.

If you selected On , follow the instructions on the page to select EtherTalk options. For more information, including a description of the fields, click the Help button in

CentreWare IS to view the online help.

9.

Click the Save Changes button.

System Administrator Guide

3-13

Cloning

Cloning

Cloning enables you to configure one printer and then copy that configuration to another printer on the same network. You can access cloning using CentreWare IS or CentreWare Web.

Using CentreWare IS, you can select the settings you want to clone from one printer to another printer. Using CentreWare Web, you can select the settings you want to clone from one printer to one or more printers.

To clone settings from one printer to another printer using CentreWare IS:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select Clone Printer on the left navigation panel.

5.

If prompted, enter your Admin or Key User name and password.

6.

On the Clone Printer page, select the settings you want to clone from the source printer or click Check All to select all the settings. The settings are:

802.1X

Custom Paper Types

Email Server

EtherTalk

HTTPS

Input Trays

IPP

Mail Alerts

Port 9100

Printer Defaults

Remote Printing

SNMP

Usage Profile Properties

Web Links

Control Panel Lockout

Date and Time

E-Supplies

FTP

Information Forwarding

Interfaces

LPR

PCL

PostScript

Printing Security Settings

Security

TCP/IP

Warmup

7.

Enter the IP address or DNS Name of the destination printer in the IP Address or DNS

Name field.

8.

(Optional) To assign a printer name to the destination printer, enter this name in the

Printer Name (SNMP System Name) field.

9.

If the destination printer is located in a different domain/zone, modify the information in the EtherTalk Zone and/or IP Domain Name fields.

10.

Click the Clone Selected Settings button.

A list of the selected settings to clone is displayed.

11.

Click the Clone button to clone the destination printer with the selected settings from the source printer.

To access CentreWare Web, go to www.xerox.com/office/pmtools .

System Administrator Guide

3-14

Security Features

This chapter includes:

Basic Concepts on page 4-2

Securing the Printer in a High Security Environment on page 4-5

Setting Up a Certificate on page 4-6

Configuring SSL on page 4-7

Configuring Administrator and Key User Settings on page 4-8

Configuring the Print Host Access List on page 4-9

Controlling Access to Color Printing on page 4-10

Securing the Hard Drive on page 4-11

802.1X Configuration on page 4-14

Locking the Control Panel Menus on page 4-16

Configuring SNMP on page 4-17

System Administrator Guide

4-1

Basic Concepts

Basic Concepts

This section includes:

About Admin and Key User Accounts on page 4-2

About HTTP, HTTPS, and SSL/TLS on page 4-3

About Certificates on page 4-3

About Access Control Lists on page 4-4

About Admin and Key User Accounts

Admin and Key User accounts in CentreWare IS enable you to limit access to specific printer functions by specifying passwords for user classes. CentreWare IS requires a name and password before access to the controlled printer functions are allowed.

The user classes are:

Admin : The person with the ultimate management responsibility and authority for controlling all functions of the printer.

Key User : A person who has some administrative responsibilities and who manages some or all of the printer functions.

Any User : Includes the majority of people who will be sending print jobs to the printer.

Once the passwords are set, select the printer functions from the Feature Authorization list that each user class has the right to access. The three categories of printer functions are:

Administrative

Web Server Printing

Printer Neighborhood

See also:

Configuring Administrator and Key User Settings on page 4-8

System Administrator Guide

4-2

Basic Concepts

About HTTP, HTTPS, and SSL/TLS

HTTP (Hyper Text Transfer Protocol) is the protocol used to communicate across the internet between the printer web server and the web browser (clients). Because the data is transmitted in plain text and passwords are only slightly encrypted, it is not secure; the data can be read or intercepted by other people.

HTTPS (Secure Hyper Text Transfer Protocol) is a secure version of HTTP. HTTPS provides authentication and encrypted communication to preserve the confidentiality of your data.

Instead of using plain text, HTTPS uses either the SSL (Secure Socket Layer) protocol or the

TLS (Transport Layer Security) protocol to encrypt data, thus ensuring reasonable protection from eavesdroppers and man-in-the-middle attacks.

Before using HTTPS, you must set up a certificate and select when to use SSL to encrypt data.

You can set the printer to use SSL either to secure web pages that use passwords or to secure all web pages.

See also:

About Certificates on page 4-3

Setting Up a Certificate on page 4-6

Configuring SSL on page 4-7

About Certificates

A certificate is an electronic message containing information about the printer and a digital signature. A certificate is stored in the printer and is used to validate the identity of the printer to clients and network servers and to allow encrypted communication.

Before configuring passwords, set up a certificate and then configure SSL to encrypt data including passwords for maximum security. You can set up a self-signed certificate or download a root-signed certificate, depending on your requirements.

See also:

Self-Signed Certificates on page 4-3

Root-Signed Certificates on page 4-4

Self-Signed Certificates

Setting up a self-signed certificate is a quick and easy way to establish a certificate on the printer. The printer automatically generates a default self-signed certificate when the printer is turned on for the first time. To modify the certificate so it is specific to your printer, use

CentreWare IS to enter information about the location of the printer.

While self-signed certificates are safe for most applications and allow data encryption, they do not ensure valid authentication. Self-signed certificates are not necessarily secure because the certificate owner is only confirming his own identify instead of verification by a trusted third party. Although self-signed certificates encrypt the data that is exchanged, they do not prevent man-in-the-middle attacks.

System Administrator Guide

4-3

Basic Concepts

If you want to use HTTPS, each printer must have a unique certificate that is accepted by each browser used to access the printer. This allows the printer web server to use HTTPS and encrypt data between the web browser and the printer. In addition, because each printer’s certificate is unique, you must load a different certificate into the browser for each printer the browser will access.

Root-Signed Certificates

Root-signed certificates are from a trusted Certificate Authority (CA). Using a certificate signed by a CA enables you to load one certificate into each browser, allowing access to all printers. Certificates from a trusted third party are considered more secure than self-signed certificates. Unlike self-signed certificates, root-signed certificates are not susceptible to man-in-the-middle attacks.

See also:

Setting Up a Certificate on page 4-6

Configuring SSL on page 4-7

About Access Control Lists

Access control lists enable you to limit access to devices, as well as device configuration and management features. By default, access control lists are unrestricted, which means all computers and host systems are allowed access.

The printer has five access control lists that may be configured using CWIS:

Print Host Access List : The computers from which users can print. For information on

setting up the Print Host Access List, see Configuring the Print Host Access List on page 4-9.

Color Access Control : A 4-digit numeric password is required in order for users to print in color.

Administrator Access List : The computers from which you can change printer settings.

For information on setting up the Administrator Access List, see

Configuring

Administrator and Key User Settings on page 4-8.

Key User Access List : The computers from which key users can change printer settings.

For information on setting up the Key User Access List, see Configuring Administrator and Key User Settings on page 4-8.

SNMP Access List : The host machines that are authorized to access the printer using

SNMP. For information on setting up the SNMP Access List, see Configuring the SNMP

Access Control List on page 4-22.

System Administrator Guide

4-4

Securing the Printer in a High Security Environment

Securing the Printer in a High Security

Environment

If you are concerned about the security of your printer in a high security environment, such as a college or printing kiosk, you can configure settings in CentreWare IS to “lockdown” or fully secure the printer. If you are not concerned about the security of your printer, you may only need to set up a certificate and then configure SSL to encrypt data including passwords.

To fully secure a printer:

1.

Set up a certificate. (See Setting Up a Certificate on page 4-6.)

2.

Select when to use SSL. (See Configuring SSL on page 4-7.)

Note: The following steps may be completed in any order.

3.

Select the Administrator and Key User Settings. (See Configuring Administrator and Key

User Settings on page 4-8.)

Note: To prevent users from changing settings, clear the Modify Configuration Web

Pages check box. To prevent users from viewing settings, clear the View Configuration

Web Pages check box.

4.

Set up the Print Host Access List. (See

Configuring the Print Host Access List on page 4-9.)

5.

Set up the removal of Unprinted Personal, Secure, and Proof Print Jobs. (See Selecting the

Automatic Removal of Secure, Personal, and Proof Jobs Option on page 4-12.)

6.

Select the Hard Drive Overwrite

option. (See Securing the Hard Drive on page 4-11.)

7.

Select the Jam Recovery

option. (See Jam Recovery on page 5-3.)

8.

Lock the control panel menus. (See

Locking the Control Panel Menus on page 4-16.)

9.

Configure SNMP. (See Configuring SNMP on page 4-17.)

10.

Disable unused protocols. (See Protocol Control on page 3-6.)

11.

Disable Job Accounting

. (See To Enable or Disable Job Accounting on page 3-3.)

Note: To secure protocols, disable any protocols you are not using. This prevents unauthorized access through applications that use these protocols. For example, if you want to use IPP for a secure printing channel, disable the other printing protocols,

Port 9100 and LPR. Disabling some protocols also disables some printer functions, such as printer discovery and PrintingScout.

System Administrator Guide

4-5

Setting Up a Certificate

Setting Up a Certificate

To modify a self-signed certificate so it is specific to your printer or to install a downloaded root-signed certificate on the printer:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select SSL .

6.

If prompted, enter your Admin or Key User name and password.

The Current State field displays the current state of the printer. Possible values include:

A Digital Certificate is not established on this machine . This state displays if an error occurred when the certificate was created.

A Self-Signed Certificate is established on this machine . The printer creates a

Self-Signed Certificate by default.

A CSR has been created, and can be accessed through the following location. This allows the administrator to access the Certificate Signing Request, or click Install

Signed Certificate to upload a signed certificate to the printer. This state displays after a CSR is generated, and before a signed certificate is installed.

A Digital Certificate has been installed on this machine . This state displays after a

Signed Digital Certificate is installed.

7.

Click the Create Certificate button.

8.

Do one of the following:

To modify a Self-signed Digital Certificate, select Self-Signed Certificate .

To install a Signed Digital Certificate that includes a private key from a trusted

Certificate Authority (CA), select Install downloaded Certificate .

9.

Click the Next button.

10.

Do one of the following:

If you selected Self-Signed Certificate , enter the appropriate information in the fields, and then click the Finish button to save the settings. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

If you selected Install Downloaded Certificate , click the Browse button to select the certificate from the PC’s hard drive, and then click the Finish button to validate and install the certificate. Once the certificate is installed, the main SSL page displays.

See also:

About Certificates on page 4-3

System Administrator Guide

4-6

Configuring SSL

Configuring SSL

Once a certificate is set up, you can select when to use SSL to secure the connection between the printer and the server.

Note: You can restrict user access to SSL pages in CentreWare IS. For more information, see

Configuring Administrator and Key User Settings on page 4-8.

To configure SSL:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select SSL .

6.

If prompted, enter your Admin or Key User name and password.

7.

In the Use SSL box, select one of the following options:

Never (the default): SSL authentication is not required.

To Secure Passwords : Secures web pages that use passwords. A certificate must exist on the printer before you can use this setting.

■ To Secure Pages and Passwords

8.

Click the Save Changes button.

: Secures all web pages.

See also:

Setting Up a Certificate on page 4-6

System Administrator Guide

4-7

Configuring Administrator and Key User Settings

Configuring Administrator and Key User Settings

To prevent unauthorized changes to printer settings:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select Administrative Security Settings .

6.

If prompted, enter your Admin or Key User name and password.

7.

In the Administrator Settings box, do one or both of the following:

In the Host Access List field, enter the IP addresses or host names of the computers allowed to change printer settings. Separate entries with a blank or a comma, specify ranges with a hyphen (-), and use an asterisk (*) to represent a group of numbers

(e.g., 13.62.156.*). The default setting is Unrestricted , which allows all users to change printer settings.

In the User Name and Password fields, enter your user name and password (up to 10 alphanumeric characters). In Verify Password , re-enter the password. The user name and password should be kept secure.

8.

Repeat Step 7 in the Key User box. When entering the user name and password, enter the user name and password for key users.

Note: If you want to use the Key User account, you must configure an Administrator account. If the Administrator account is empty, then Any User has the same permissions as the Administrator user.

9.

In the Feature Authorization Settings box, select the check boxes next to the settings you want to enable for each type of user. Clear the check boxes next to the settings you want to prevent users from changing. The administrator has full rights and access to all functions.

Any User may not have greater access to a function than the Key User.

Note: If you want to prevent users in the Key User or Any User classes from using

CentreWare IS to change printer settings, clear the Modify Configuration Web Pages check box. If you want to prevent users in the Key User or Any User classes from viewing

CentreWare IS pages that control printer settings, clear the View Configuration Web

Pages check box.

10.

Click the Save Changes button.

See also:

About Admin and Key User Accounts on page 4-2

System Administrator Guide

4-8

Configuring the Print Host Access List

Configuring the Print Host Access List

To prevent unauthorized printing to your printer:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select Printing Security Settings .

6.

If prompted, enter your Admin or Key User name and password.

7.

Enter the IP addresses or host names of the computers allowed printing access in the Host

Access List field. Separate entries with a blank or a comma, specify ranges with a hyphen (-), and use an asterisk (*) to represent a group of numbers (e.g., 13.62.156.*). The default setting is Unrestricted , which allows all users to access the printer to print their jobs.

8.

Click the Save Changes button.

See also:

About Access Control Lists on page 4-4

System Administrator Guide

4-9

Controlling Access to Color Printing

Controlling Access to Color Printing

To control the user’s access to color printing, you can require the use of a 4-digit numeric password to print in color.

To require a password:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select Printing Security Settings .

6.

Enter a 4-digit numeric password in the Color Permission PIN field.

7.

Click the Save Changes button.

Note: You will not be able to use the TekColor tab until you enter a numeric password in the driver.

To enter a password in the driver:

1.

Access the driver.

Note: Usually you access the driver by clicking Print in your application, and then clicking Properties .

2.

On the Layout tab, click the Advanced button.

3.

In the Color Access field, enter the numeric password.

4.

The TekColor tab is now available for use and the user can print in color.

System Administrator Guide

4-10

Securing the Hard Drive

Securing the Hard Drive

This section includes:

Selecting the Hard Drive Overwrite Security Option on page 4-11

Selecting the Automatic Removal of Secure, Personal, and Proof Jobs Option on page 4-12

Selecting the Hard Drive Overwrite Security Option

When a file is deleted from the printer’s hard drive, only the file name is deleted; the data in the file remains on the hard drive, regardless of the operating system. An unauthorized person could, possibly, retrieve the data in the file that was deleted.

Printers with a hard drive have a Hard Drive Overwrite Security option. This option overwrites the data stored on the hard drive of a file marked for deletion using DOD5200.28-M, a U.S.

Department of Defense three-pass overwriting process: first with a pattern of 0’s, next with a pattern of 1’s, and finally with a random pattern of bits. This is done before the file’s directory entry is removed and the storage space on the hard drive is marked as available for reuse. The random pattern of bits stays on the hard drive until it is overwritten by another file.

By default, the Hard Drive Overwrite Security option is disabled. To select the Hard Drive

Overwrite Security option, you can use one of the following methods:

The printer’s control panel.

CentreWare IS

Using the Control Panel

To select the automatic removal of secure, personal, and proof print files from the hard drive:

1.

On the control panel, select Printer Setup , and then press the OK button.

2.

Select File Security , and then press the OK button.

Note: If File Security is locked on the control panel, use CentreWare IS to select the Hard

Drive Overwrite Security option.

3.

To remove all secure, personal, and proof print job files: a.

Select Overwrite Removals , and then press the OK button to select On or Off .

Note: Remove Job Files does not remove saved or protected print job files.

System Administrator Guide

4-11

Securing the Hard Drive

Using CentreWare IS

To select the Hard Drive Overwrite Security option:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select Printing Security Settings .

6.

If prompted, enter your Admin or Key User name and password.

7.

Under Hard Drive Overwrite Security Options , select one of the following options:

Never overwrite files/jobs : Disables the printer’s overwrite feature.

Always overwrite when deleting files/jobs : Sets the printer to always overwrite the files on the hard drive when they are deleted.

8.

Click the Save Changes button.

Selecting the Automatic Removal of Secure, Personal, and

Proof Jobs Option

The printer enables you to store secure, personal, and proof jobs on the hard drive and then print them later. You can choose how long these jobs remain on the hard drive. This feature is useful when someone:

Forgets about an unprinted secure, personal, or proof job that was stored on the hard drive.

Sends a secure job to the printer, but does not walk to the printer to print the job.

Stores a proof job, prints it once, and then forgets to delete it.

To set the automatic removal of secure, personal, and proof print files from the hard drive, use one of the following methods:

The printer’s control panel

CentreWare IS

Using the Control Panel

To select the automatic removal of secure, personal, and proof print files from the hard drive:

1.

On the control panel, select Printer Setup , and then press the OK button.

2.

Select File Security , and then press the OK button.

Note: If File Security is locked on the control panel, use CentreWare IS to select the Hard

Drive Overwrite Security option.

3.

To remove all secure, personal, and proof print job files: a.

Select Overwrite Removals , and then press the OK button to select On or Off .

Note: Remove Job Files does not remove saved or protected print job files.

System Administrator Guide

4-12

Securing the Hard Drive

4.

To remove all secure, personal, and proof print files every day at a set time: a.

Select Daily Removal , and then press the OK button to select On or Off .

b.

Select Remove At HH:MM , and then press the OK button. c.

Enter the hour, and then press the OK button.

d.

Enter the minute, and then press the OK button.

5.

To remove all secure, personal, and proof print files after the files are a certain age or older: a.

Select Age-based Removal , and then press the OK button to select On or Off .

b.

If you selected On , select Remove At Age , and then press the OK button.

c.

Enter 1 to 999 hours, and then press the OK button.

Note: To reset all items in the File Security menu to their default values, select Reset File

Security .

Using CentreWare IS

To select the automatic removal of secure, personal, and proof print files from the hard drive:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select Printing Security Settings .

6.

If prompted, enter your Admin or Key User name and password.

7.

Under Remove Unprinted Personal , Secure and Proof Jobs , select one or more of the following options:

Upon Save Changes : All personal, secure, and proof jobs are removed when you click the Save Changes button.

At this time each day (24hr) : All unprinted personal, secure, and proof jobs are removed at this time each day.

When jobs are : All unprinted, personal, secure, and proof jobs are removed when they are this age or older.

Note: Files deleted using one of these options are overwritten if the Hard Drive Overwrite

Security option has been enabled. For more information, see Selecting the Hard Drive

Overwrite Security Option on page 4-11.

8.

Click the Save Changes button.

System Administrator Guide

4-13

802.1X Configuration

802.1X Configuration

Introduction to 802.1X and EAP

The 802.1X IEEE standard defines port-based, authenticated network access control for

Ethernet local area networks (LANs). With 802.1X, the user or device must pass network access control by successfully authenticating with credentials, such as a name and password, or network access is denied. 802.1X uses the Extensible Authentication Protocol (EAP) to relay port access requests between LAN stations/the clients being authenticated (supplicants),

Ethernet switches or wireless access points (authenticators) and RADIUS servers

(authentication servers).

EAP is the standard authentication mechanism carried over 802.1X. The EAP method is an inner authentication protocol that provides the secure mechanism for the authentication exchange. Multiple EAP methods can be used. EAP methods are defined in International

Engineering Task Force (IETF) Requests for Comments (RFC) documents, RFC drafts, or they can be proprietary. EAP methods have a significant influence on how your network is designed and implemented, because not all supplicants, not all access points, and not all

RADIUS servers support all EAP methods. A careful evaluation of standards can help with selecting appropriate LAN components that will avoid vendor lock-in or dead-end technology.

802.1X Configuration in CentreWare IS

Use the 802.1X configuration pages in CentreWare IS to perform the following tasks.

Required information varies depending on the EAP method(s) that you select.

Note: Access to the 802.1x configuration pages in CentreWare IS can be restricted by the passwords and feature authorization settings under Administrative Security.

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Open the Security folder on the left navigation panel and select 802.1X

.

5.

Click the Advanced button for more experienced users or click the Configuration

Wizard button which will guide you through the setup.

For more information, click the Help button in CentreWare IS to view the online help.

6.

Select EAP authentication method(s) – Select one or more authentication methods:

MD5 Challenge

TLS

PEAP-MS-CHAPv2 (PEAP)

If you selected a method that uses X.509 security certificates ( TLS or PEAP ), you can use use a root certificate to validate the authenticating server's certificate.

If you have selected

TLS

authentication, you must either install a signed device certificate that is trusted by the authenticating server, or add the device's self-signed certificate to the authenticating server's trusted certificate store.

System Administrator Guide

4-14

802.1X Configuration

7.

Install root certificate – If you select EAP method(s) that require a root certificate, you can:

Install a new root certificate.

Use the already existing root certificate.

Choose not to validate server.

8.

Install device certificate – If you select EAP method(s) that require a device certificate, you can:

Install a new device certificate.

Use the default self-signed certificate.

Use a custom self-signed certificate.

Use the already existing signed device certificate – if one exists.

9.

Enter credentials – Specify the user name and password that users must provide, if you select EAP method(s) that require credentials.

System Administrator Guide

4-15

Locking the Control Panel Menus

Locking the Control Panel Menus

To prevent others from changing settings in the printer setup menus, you can lock some of the control panel menus. This is useful when printers are located in public places, such as schools, libraries, and office/print centers.

Use CentreWare IS to lock or unlock the control panel menus:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select Control Panel Lockout .

6.

If prompted, enter your Admin or Key User name and password.

7.

Select the check box of each control panel menu item you want to lock.

Note: If you lose the Admin password and Reset NVRAM is locked on the control panel, a Fee-For-Service call is required to reset the password and to enable changes to printer settings. When the password is reset, you must reconfigure the printer settings because all the stored data is deleted.

8.

Click the Save Changes button.

System Administrator Guide

4-16

Configuring SNMP

Configuring SNMP

This section includes:

Configuring SNMP for Maximum Security

Configuring SNMP v1/v2c on page 4-18

Configuring SNMP v3 on page 4-20

Configuring the SNMP Access Control List

Disabling SNMP on page 4-23

on page 4-17

on page 4-22

If you are using SNMP, you must configure it using CentreWare IS. If you are not using

SNMP, disable it to prevent unauthorized access through applications that use SNMP. For information on disabling SNMP, see

Disabling SNMP on page 4-23.

SNMP is a set of protocols designed to help manage complex networks. SNMP compliant devices store data about themselves in MIBs and return this data to the SNMP requestors. The

SNMP configuration pages provide control over SNMP security, including the methods to configure:

Administrative and Key User Accounts with privacy and authentication protocols and keys associated with each account.

SNMP user account read or read/write access.

An access control list that limits SNMP access to the printer specific hosts.

Note: The Current State field on the SNMP Configuration page identifies the SNMP enable/disable status. Possible values include SNMP v3 Enabled , SNMP v1/v2c Enabled , and All SNMP Protocols Disabled .

Configuring SNMP for Maximum Security

Note: A SSL certificate must be established on the printer to enable SNMP v3. In most cases, a certificate is automatically established when the printer is first turned on and no other action is required.

Use CentreWare IS to configure SNMP for maximum security:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select SSL: a.

Select the Security folder on the left navigation panel, and then select SSL . b.

If prompted, enter your Admin or Key User name and password.

c.

On the SSL page, for Use SSL , select To Secure Pages and Passwords .

5.

Restrict access to the CentreWare IS SNMP and SSL pages: a.

On the Properties tab, select Security .

b.

Select Administrative Security Settings on the left navigation panel.

c.

If prompted, enter your Admin or Key User name and password.

System Administrator Guide

4-17

Configuring SNMP d.

On the Administrative Security Settings page, clear the View Configuration Web

Pages and Modify Configuration Web Pages check boxes for users who should not have access to these pages.

6.

Configure SNMP v3 by setting up the SNMP Administrative and Key User accounts: a.

Select the Protocols folder on the left navigation panel, and then select SNMP . b.

If prompted, enter your Admin or Key User name and password.

c.

On the SNMP Configuration page, click the Configure SNMP v3 button and set up the SNMP Administrative account. For more information, see

Configuring SNMP v3 on page 4-20, or click the

Help Button in CWIS help.

Configuring SNMP v1/v2c

Configuring SNMP v1/v2c Community Names

To configure SNMP v1v2c community names:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select SNMP .

6.

If prompted, enter your Admin or Key User name and password.

7.

On the SNMP Configuration page, click the Configure SNMP v1/v2c button.

8.

To set community names for GET/SET SNMP queries and traps, enter information (up to

32 alphanumeric characters) in one or more of the following fields:

Note: These names are not displayed on this page, but are shown as a row of asterisks (*).

GET Community Name : Allows a host to perform SNMP GETS on the printer using this community name.

SET Community Name : Allows a host to perform SNMP SETS on the printer using this community name.

Trap Community Name : Allows a host to receive traps from the printer using this community name.

Note: Hosts must have these community names configured in their applications to access the printer using SNMP v1/v2c .

9.

Click the Apply button to save the changes.

System Administrator Guide

4-18

Configuring SNMP

Adding or Editing Traps for SNMP v1/v2c

To add or edit traps for SNMP v1v2c:

1.

On the SNMP Configuration page: Click the Configure SNMP v1v2c button, and then click the Configure Traps button.

The Configure Traps page lists the current Trap Destination Addresses for the SNMP protocol.

The Address column lists the Trap Destination IP address or DNS Name.

The Version/Type column lists the SNMP Trap version or Inform Request for sending to the specified trap address. SNMP Trap versions include SNMP v1 Traps, SNMP v2c Traps, and SNMP v2c Inform Requests.

The Traps column lists the types of traps to send to the Trap Destination Address.

Traps to be received include Printer Traps, Job Monitoring Traps, Cold Start, and

Authentication Traps.

2.

Do one of the following:

To add traps for SNMP v1v2c, click the Add Destination button, and then go to

Step 3.

To edit the settings for a Trap Destination Address, click the corresponding Edit button, and then go to Step 3.

To delete a Trap Destination Address, click the corresponding Delete button.

3.

To add or edit a Trap Destination IP Address, click the IP Address radio button, and then enter the IP Address in the fields.

4.

To add or edit a Trap Destination DNS Name, click the DNS Name radio button, and then enter the DNS Name in the field.

5.

For a non-standard UDP port, enter the UDP Port Number in the field.

6.

Select the SNMP trap version to send to the specified address. SNMP versions include

SNMP v1 Traps (default), SNMP v2c Traps, and SNMP v2c Inform Requests.

SNMP v1 Traps is the default.

7.

Enter the community name of the destination device in the Community Name field.

8.

For Traps to be received , select the check boxes of the different types of traps to send to the specified address. Traps to be received include Printer Traps (default), Job Monitoring

Traps, Cold Start Traps, and Authentication Traps. At least one trap type must be selected.

9.

Click the Apply button to save the changes.

System Administrator Guide

4-19

Configuring SNMP

Configuring SNMP v3

When configuring SNMP v3, you can set up:

■ Administrative, Key, Any User, and Driver accounts with Privacy and Authentication Keys associated with each account.

SNMP user read and write access.

An access control list that limits SNMP printer access to the specific hosts. See

Configuring the SNMP Access Control List on page 4-22.

To configure and enable SNMP v3:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select SNMP .

6.

If prompted, enter your Admin or Key User name and password.

7.

On the SNMP Configuration page, click the Configure SNMP v3 button.

8.

Click the Configure Account(s) button. A series of pages display that enable you to configure SNMP v3 and the Administrative User , Key User , and Any User/Driver settings. The first page displays Administrative User account information after the account has been created.

9.

Do one of the following:

To create the Administrative User account and to enable SNMP v3, enter a user name or accept the default name admin , and then click the Create button.

To configure the Key User and other account settings, click the Next button.

To delete the Administrative User account and disable SNMP v3, click the Delete button. This also deletes all other accounts, including the Key User and Any User settings.

The Administrative User Account Settings

User Name : The Administrative User account name defined on the Configure SNMP v3:

Administrative User Account page.

Authentication Protocols: The protocol associated with the Authentication Key; selected on the Configure SNMP v3: Administrative User Account page.

Authentication Key : The Authentication Key defined on the Configure SNMP v3:

Administrative User Account page is displayed as a row of asterisks (*) here.

Privacy Protocol : The protocol associated with the Privacy Key; selected on the

Configure SNMP v3 Administrative User Account page.

Privacy Key : The Privacy Key defined on the Configure SNMP v3: Administrative

User Account page is displayed as a row of asterisks (*) here.

MIB Access : The Administrative User account's MIB access permissions, which are set to

Read/Write by default.

System Administrator Guide

4-20

Configuring SNMP

The Key User Account Settings

User Name : The Key User account name defined on the Configure SNMP v3: Key User

Account page.

Authentication Protocol : The protocol associated with the Authentication Key; selected on the Configure SNMP v3 Key User Account page.

Authentication Key : The Authentication Key defined on the Configure SNMP v3: Key

User Account page is displayed as a row of asterisks (*) here.

Privacy Protocol : The protocol associated with the Privacy Key; selected on the

Configure SNMP v3: Key User Account page.

Privacy Key : The privacy key defined on the Configure SNMP v3: Administrative User

Account page is displayed as a row of asterisks (*) here.

MIB Access

The Key User account's MIB access permissions selected on the Configure

SNMP v3: Key User Account page. MIB access for the Key User account can be set to

Read or Read/Write .

Note: SNMP Read and SNMP Write access for the Any User account must be equal to or less than the read and write access privileges set for the Key User account. Once the Key User account is created, if the Any User account is set to have read and/or write access, but the Key

User account access is not set, the Key User account is set with the same access privileges as the Any User account by default. Similarly, if the Key User account does not have SNMP

Write access, the Any User account cannot be set with write access.

The Any User/Driver Account Settings

User Name : Displays anyuser by default and cannot be changed.

MIB Access : Displays the Any User account’s MIB access permissions selected on the

Configure SNMP v3: Other Account Settings page. This can be set to Read or

Read/Write .

SNMP Read : Displays a check symbol if SNMP Read access is enabled. SNMP Read access can be enabled for the Any User account after the Key User account is created.

SNMP Write : Displays a check symbol if SNMP Write access is enabled. SNMP Write access can be enabled for the Any User account after the Key User account is created.

Driver Account Enabled : Displays a check symbol if the Driver Account is enabled

(default).

Note: If the Driver Account is disabled, it breaks communication between the printer and any applications using SNMP v3, such as Xerox printer drivers and PrintingScout. For a complete list of applications disabled, see

Disabling SNMP on page 4-23.

System Administrator Guide

4-21

Configuring SNMP

Configuring the SNMP Access Control List

To set up a list of hosts that are authorized to access the printer using SNMP:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocol folder on the left navigation panel.

5.

Select SNMP .

6.

If prompted, enter your Admin or Key User name and password.

7.

Enter up to ten host IP addresses in the SNMP Access Control List field. Separate entries with a blank or a comma, specify ranges with a hyphen (-), and use an asterisk (*) to represent a group of numbers (e.g., 13.62.156.*).

8.

Click the Save Changes button.

See also:

About Access Control Lists on page 4-4

System Administrator Guide

4-22

Configuring SNMP

Disabling SNMP

If you are not using SNMP, disable it to prevent unauthorized access through applications that use these protocols. If you disable SNMP, the following driver features are also disabled:

PrintingScout alerts

Walk-Up Printing Installer

Smart Trays

PhaserSMART

Auto supplies ordering

Consumable levels

Warning and error status

Synchronization with installed options, such as hard drive, memory, and extra trays

To disable SNMP:

1.

Launch your web browser.

2.

Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Protocols folder on the left navigation panel.

5.

Select SNMP .

6.

If prompted, enter your Admin or Key User name and password.

7.

Click the Disable SNMP Now button.

8.

Click the Save Changes button.

System Administrator Guide

4-23

.

Printing Features

This chapter includes:

Secure, Personal, Personal Saved, Proof, Print With and Saved Print Jobs on page 5-2

Smart Trays on page 5-2

Jam Recovery on page 5-3

System Administrator Guide

5-1

Secure, Personal, Personal Saved, Proof, Print With and Saved Print Jobs

Secure, Personal, Personal Saved, Proof, Print

With and Saved Print Jobs

These features are available if your printer has an internal hard drive. These jobs are stored on the hard drive and remain in the printer even when it is turned off.

Note: For information about special job types, see Printing Special Job Types in the Advanced

Features Guide for your printer at www.xerox.com/support .

Select one of the following special job types:

Normal : Prints the job without requiring a password.

Personal Print : Prints the job when you select your user name on the control panel or in

CentreWare IS from the Personal Jobs page on the Print tab. Job is deleted after printing.

Personal Saved Jobs : Stores the job on the hard drive with your four-digit numeric password so you can print it on demand from the control panel or in CentreWare IS from the Personal Jobs page on the Print tab. The job is not deleted after printing.

Secure Print : Prints the job only after you enter the four-digit numeric password on the control panel.

Proof Print : Prints only one copy of the job so that you can proof the copy. If you want to print the remaining copies, select the job name on the control panel.

Saved Print : Stores the job on the hard drive so you can print it on demand from the control panel. The job is not deleted after printing. This is useful for any document you frequently print, such as tax forms, personnel forms, or requisition forms.

Print With: Prints the current job with existing jobs that are stored on the printer’s hard drive that you specify in the Print With Settings dialog box when you click the

Print With button.

Smart Trays

The Smart Trays feature in the Windows drivers enables you to view the size and type of media in each tray of the printer before sending the job. In Windows environments, when you access the printer properties, the driver queries the printer for the current paper and tray configuration and displays that information on the Paper/Quality tab.

System Administrator Guide

5-2

Jam Recovery

Jam Recovery

Note: Jam recovery is not available on all printer’s, check the documentation that came with your printer for more information.

The jam recovery settings enable you to select how the printer handles jobs that are in the process of printing when a media jam occurs. Jam recovery settings are especially important to consider when printing checks. Normally when a media jam occurs, you can pull out the jammed media and the printer reprints that page and then the rest of the job. While printing checks, someone could cause a media jam as the media is exiting the printer so that a check is reprinted. To prevent the printer from printing two copies of the same check, you can set the printer to begin printing the job from the point where the media jammed through the end of the job, or cancel the job completely.

To configure the jam recovery setting, use one of the following methods:

The printer’s control panel

CentreWare IS

Using CentreWare IS

To configure the jam recovery setting:

1.

Launch your web browser.

2.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3.

Click Properties .

4.

Select the Security folder on the left navigation panel.

5.

Select Printing Security Settings .

6.

If prompted, enter your Admin or Key User name and password.

7.

Under Jam Recovery Options , select one of the following options:

Reprint the jammed page and continue printing the rest of the job : After the jam is cleared, the printer begins printing the job from the point where the media jammed, including the jammed page, through the end of the job.

Immediately cancel the entire print job : After the jam is cleared, the printer cancels the rest of the print job.

8.

Click the Save Changes button.

System Administrator Guide

5-3

Glossary

Terms and Abbreviations

Terms and

Abbreviations access control list

Admin account authentication bi-directional

BOOTP

CentreWare Internet

Services (IS)

CentreWare Web certificate

DHCP

DNS

Definitions

A CentreWare IS feature that enables you to limit access to devices, as well as device configuration and management features.

A CentreWare IS feature that enables you to limit access to specific printer functions by specifying a name and password. The Admin account has the most permissions. The administrator must know the Admin name and password to access the printer functions in CentreWare IS.

A CentreWare IS feature that requires users to login with a network user ID and password for security and tracking purposes.

A type of connection in which communications are sent and received simultaneously.

BOOTP (Boot Parameter Protocol) is a protocol that allows a network user to be automatically configured (receive an IP address) and have an operating system boot or initiated without user involvement.

CenterWare IS is a printer administration and support tool. With

CenterWare IS software, you can access printer status and manage your printer over a TCP/IP network using a web browser.

A web-based, device-management solution for Windows 2000 environments where you use a browser for administration.

An electronic message containing information about the printer and a digital signature, which is stored in the printer. A certificate is used to validate the identity of the printer to clients and network servers and to allow encrypted communication.

DHCP (Dynamic Host Configuration Protocol) is a protocol in which

UNIX, Windows, NT, and Window 2000 servers can dynamically allocate

TCP/IP addresses.

DNS (Domain Name System) is used in the Internet for translating names of network nodes into addresses.

System Administrator Guide

6-1

Terms and Abbreviations

Terms and

Abbreviations Definitions driver

EAP

EtherTalk

FTP host

HTTP

HTTPS

Internet

IP

IP address

IPP

Software that is loaded on the client workstation that prepares data to be sent to the printer.

EAP is the standard authentication mechanism carried over 802.1X. The

EAP method is an inner authentication protocol that provides the secure mechanism for the authentication exchange.

A type of network connection (provided by EtherTalk software installed in a Macintosh computer) that enables use of AppleTalk network services on an Ethernet network.

FTP (File Transfer Protocol) is a basic TCP/IP connectivity utility used to transfer data between computers.

A computer or other device on a TCP/IP network.

HTTP (Hyper Text Transfer Protocol) is a non-secure protocol used to communicate across the internet between the printer web server and the web browser (clients).

HTTPS (Secure Hyper Text Transfer Protocol) is a secure protocol used to provide authentication and encrypted communication to preserve the confidentiality of your data.

The global collection of networks that are connected together and share a common range of IP addresses.

The network protocol used for sending network packets over a TCP/IP network.

A unique 32-bit address for a host on a TCP/IP network or Internet working.

IPP (Internet Printing Protocol) is an application-level protocol that is used for distributed printing on the Internet and intranets, designed and implemented by Xerox research to validate the IPP specification and as an aid in developing IPP servers.

job accounting

Key User account

The purpose of job accounting is to collect and report information about all jobs that print. The information collected identifies the submitter of the job and the resources used to print the job.

A CentreWare IS feature that enables you to limit access to specific printer functions by specifying a name and password. You can set up a

Key User account that is password protected. The Key User has the ability to change some printer settings. CentreWare IS requires the name and password before access to the printer function is allowed.

LPR

MaiLinX alerts

LPR (Line Printer Remote) is an application-level printing protocol that uses TCP/IP to establish connections between printers and workstations on a network.

A feature in CentreWare IS that allows the printer to automatically send email to you and others under certain conditions.

MaiLinX remote printing A feature in CentreWare IS that enables you to print to Xerox printers over the Internet, directly from Windows applications. The print jobs are sent as email.

System Administrator Guide

6-2

Terms and Abbreviations

Terms and

Abbreviations mDNS

MIB network network address network connection

PCL

PJL

PhaserSMART

Technical Support

Port 9100

PostScript printer driver printer discovery

Printer Neighborhood

PrintingScout alerts printing kiosk protocol

RADIUS

Definitions mDNS (multicast DNS) is a multicast-based discovery protocol that enables you to find your printer on an Apple network or another device that uses multicast-based discovery.

MIB (Management Information Base) provides specific information about the state of hardware components and software processes. MIB is used as part of network management tools and functions.

A collection of connected devices, such as computers and printers. A network is a tool for communication that allows users to store and retrieve information, share printers, and exchange information.

The network portion of an IP address. For a class A network, the network address is the first byte of the IP address. For a class B network, the network address is the first two bytes of the IP address.

The software and protocol that connect network devices, such as PCs and printers.

PCL (Printer Control Language) is the PDL language created by

Hewlett-Packard. It became an industry standard and is now available in almost all printer platforms for the office (e.g., PCL 5).

PJL (Printer Job Language) and PCL commands are used in application programs to control job settings and printer defaults.

PhaserSMART Technical Support is an automated, internet-based support system that uses the user’s default web browser to send diagnostic information from their printer to the Xerox website for analysis.

A printing protocol known as AppSocket, RAW, or Windows TCPmon.

A page description language created by Adobe and used in most Xerox

Phaser printers.

Enables your computer and printer to communicate; provides access to the features of your printer.

Software mechanism for finding printers typically on a network.

A tool in CentreWare IS that enables you to search for printers on your network, check their status, and manage them remotely.

PrintingScout is a tool that is installed with the Xerox printer driver. It automatically checks the printer status when a print job is sent. If the printer is unable to print a job, PrintingScout automatically displays an alert on the user’s computer screen to let them know that the printer needs attention. The user can click the alert to view instructions explaining how to fix the problem.

A digital imaging/print platform that is used to connect a laptop computer to a network for printing to a printer, and then paying for the output. A printing kiosk is sometimes located in an airport or library.

The rules that control the transmitting and receiving of data.

Radius is a server used for remote user authentication and accounting. It can be used on any network that needs a centralized authentication and/or accounting service for its workstations.

System Administrator Guide

6-3

Terms and Abbreviations

Terms and

Abbreviations

SLP

Smart Trays

SMTP

SNMP

SSL

TCP/IP

TFTP

TLS

UDP

Walk-Up Printing Driver

Walk-Up Technology

Xerox Usage Analysis

Tool

Definitions

SLP (Service Location Protocol) is a protocol that provides a flexible and scalable framework for providing hosts with access to information about the existence, location, and configuration of networked services. SLP is useful in enterprise networks.

A driver feature that displays the current paper type and size available in each printer tray.

SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail messages between servers.

SNMP (Simple Network Management Protocol) is a protocol used to help manage complex networks. SNMP-compliant devices store data about themselves in MIBs (Management Information Bases) and return this data to the SNMP requestors.

SSL (Secure Socket Layer) is a protocol that has become the universal standard on the Web for authenticating sites and for encrypting communications between users and Web servers. Because SSL is built into all major browsers and Web servers, simply installing a digital certificate or Server ID enable SSL capabilities.

TCP/IP (Transmission Control Protocol/Internet Protocol) is a set of communication protocols that is supported by a variety of computer platforms. TCP controls data transfer, and IP controls data routing.

TFTP (Trivial File Transfer Protocol) is a version of the TC/IP FTP protocol that uses UDP and has no directory or pass capability.

TLS (Transport Layer Security) is a protocol for establishing a secure connection between the client and the server. TLS is capable of authenticating both the client and the server and creating an encrypted connection between the two. HTTP uses TLS to establish secure connections.

UDP (User Datagram Protocol) is a minimal message-oriented transport layer protocol found on domain name servers (DNS).

The Xerox Walk-Up Printing Driver enables printing from a PC to any

Xerox Postscript-enabled printer. For more information, see Walk-Up

Printing Driver on page 2-3.

The Xerox Print Driver Installer (Windows) is a software utility that provides for quick and easy installation of the printer driver. One choice

for installation is Walk-Up Technology. For more information, see Walk-Up

Installation on page 2-3.

The Xerox Usage Analysis Tool enables you to collect and analyze enterprise-wide Xerox network printer usage data with customizable features.

System Administrator Guide

6-4

Configuration Card

Parameters

The printer has a configuration card that stores network parameters and configuration (N, DN,

DX, etc.) data. The configuration card is hot swappable, enabling you to share or replace it, providing an alternative to on-site service.

Network settings are saved on the configuration card. If the configuration card is removed from an old printer and inserted into a new printer, the saved settings on the configuration card are copied to the new printer when it is powered on. The new printer assumes the identity of the old printer, eliminating the need to reconfigure network settings.

This appendix includes:

General Information Parameters on page A-2

PostScript Parameters on page A-2

PCL Parameters on page A-3

USB 2.0 Parameters on page A-3

Hard Drive Parameters on page A-3

Network Information Parameters on page A-3

PhaserShare Series B Interface for Ethernet Network Parameters on page A-3

EtherTalk Parameters on page A-4

TCP/IP Parameters on page A-4

DNS Parameters on page A-5

SLP Parameters on page A-5

SSDP Parameter on page A-5

NBNS (WINS) Parameters on page A-5

Access Control Parameter on page A-5

LPR Parameters on page A-5

AppSocket (Port 9100) Parameters on page A-6

IPP (Internet Printing Protocol) Parameters on page A-6

SNMP Parameters on page A-6

CentreWare IS (HTTP) Parameters on page A-6

FTP Parameters on page A-6

Status Notification Parameter on page A-7

MaiLinX Remote Printing Parameters on page A-7

System Administrator Guide

A-1

General Information Parameters

General Information Parameters

Printer Name

Startup Page Enabled

Printer ID

Sys/Start Job

Job Timeout

Load Paper Timeout

Menu Timeout

Power Saver Timeout

Intelligent Ready

Paper Source

Tray 1 (MPT)

Tray 2

Tray 3

Tray 4

Tray 5

Note: The Tray 3, Tray 4, and Tray 5 parameters are only stored on the printer configuration card if the optional trays are available for your printer and installed.

Tray 1 (MPT) Mode

Tray 1 (MPT) Prompt

Tray 2 - N Prompt

Tray 2 - N Mode

Letter/A4 Substitution

2-Sided Printing

Metric Defaults

PostScript Parameters

Printer Quality

Color Correction

Error Info

Image Smoothing

System Administrator Guide

A-2

PCL Parameters

PCL Parameters

Font Number

Pitch

Point Size

Symbol Set

Orientation

Form Length

Line Termination

Color Mode

Wide A4

USB 2.0 Parameters

Language

Wait Timeout

Hard Drive Parameters

The hard drive parameters are only stored on the configuration card if the printer has an internal hard drive.

Overwrite Deleted Files

Daily Removal

Age-based Removal

Network Information Parameters

Wait Timeout

Sys Admin Contact

Printer Location

PhaserShare Series B Interface for Ethernet

Network Parameters

Network Speed/Type

Network Address

System Administrator Guide

A-3

Certificates

Device Certificate

Friendly Name

Root Certificate

802.1x

Enabled

Disabled

EtherTalk Parameters

Enabled

Disabled

Language

Filtering

Name

Printer Type

Zone

Network Node

TCP/IP Parameters

Enabled

Disabled

Host Name

Host Name Requested

IP Address

Network Mask

Router/Gateway

DHCP/BOOTP

IP Address Source

DDNS

SMTP Server

SMTP Reverse Path

System Administrator Guide

A-4

Certificates

DNS Parameters

Primary Server

Secondary Server

Multicast DNS (Bonjour) Enable

SLP Parameters

Enabled

Disabled

Directory Agent Discovery Enable

Directory Agent

Scope 1

Scope 2

Scope 3

SLP Multicast Enable

SLP Multicast TTL

SLP MTU

SSDP Parameter

Enabled

Disabled

SSDP TTL

NBNS (WINS) Parameters

Node Type

WINS Servers

Access Control Parameter

■ Host Access List

LPR Parameters

Enabled

Disabled

Filtering

Enable Banners

System Administrator Guide

A-5

DNS Parameters

AppSocket (Port 9100) Parameters

AppSocket (Port 9100) Parameters

Enabled

Disabled

Language

Filtering

IPP (Internet Printing Protocol) Parameters

Enabled

Disabled

Language

Filtering

Network Path

SNMP Parameters

SNMP v1/v2c

SNMP v3

Host Access List

CentreWare IS (HTTP) Parameters

Enabled

Disabled

Custom Link

Refresh Delay

Administrator Password

Key User Password

Use SSL

FTP Parameters

Enabled

Disabled

Language

Filtering

Login Password

System Administrator Guide

A-6

Status Notification Parameter

Status Notification Parameter

Disabled

Enabled

SysAdmin Email Address

Service Email Address

Key User email Address

MaiLinX Remote Printing Parameters

Language

Filtering

POP3 Server

POP3 User Name

POP3 Password

POP3 Polling Interval

Printing Password

Authorized Users

System Administrator Guide

A-7

Printer Commands

Printer Control Language (PCL) and Printer Job Language (PJL) commands can be used to control print job settings and printer defaults. In addition to the standard PCL and PJL commands, the Phaser printers support Xerox-unique PCL and PJL commands. This appendix lists the most commonly used standard and Xerox-unique PCL and PJL commands.

This appendix includes:

Phaser PCL Commands on page B-2

Phaser PJL Commands on page B-5

See also:

HP PCL 5 Printer Language Reference Manual for standard PCL commands.

System Administrator Guide

B-1

Phaser PCL Commands

Phaser PCL Commands

This section includes:

Media Size on page B-2

Media Type on page B-3

Input Trays on page B-4

Output Trays on page B-4

Media Size

The following table lists the most common PCL commands for supported media sizes. For information on which media sizes are supported in your printer, and the trays that support them, print the Paper Tips page from your printers control panel.

Media Size

A3 (297 x 420 mm)

A4 (210 x 297 mm)

A5 (148 x 210 mm)

A6 (105 x 148 mm)

B4-JIS (176 x 257 mm)

B5 Envelope (176 x 250 mm)

B5-ISO (176 x 257 mm)

B5-JIS (182 x 257mm)

SRA3 (320 x 450 mm)

Statement (5.5 x 8.5 in.)

Tabloid (11 x 17 in.)

Tabloid Extra (12 x 18 in.)

Executive (7.25 x 10.5 in.)

Letter (8.5 x 11 in.)

US Folio (8.5 x 13 in.)

Legal (8.5 x 14 in.)

A7 Envelope (5.25 x 7.25 in.)

#10 Commercial Envelope (4.1 x 9.5 in.)

Monarch Envelope (3.8 x 7.5 in.)

C4 Envelope (162 x 229 mm)

C5 Envelope (162 x 229 mm)

PCL 5 Command

*

<Esc>&l27A

<Esc>&l26A

<Esc>&l25A

<Esc>&l24A

<Esc>&l46A

<Esc>&l100A

<Esc>&l65A

<Esc>&l45A

<Esc>&l202A

<Esc>&l15A

<Esc>&l6A

<Esc>&l201A

<Esc>&l1A

<Esc>&l2A

<Esc>&l10A

<Esc>&l3A

<Esc>&l84A

<Esc>&l81A

<Esc>&l80A

<Esc>&l93A

<Esc>&l91A

System Administrator Guide

B-2

Phaser PCL Commands

Media Size PCL 5 Command

*

DL Envelope (110 x 220 mm)

C6 Envelope (114 x 162 mm)

Choukei 3 Gou

<Esc>&l90A

<Esc>&l92A

<Esc>&l87A

Choukei 4 Gou

Custom

<Esc>&l86A

<Esc>&l101A

* The character that follows the “&” in the command is the lowercase letter “L”.

Media Type

The following table lists the most common PCL commands for supported media types. For information on which media sizes are supported in your printer, and the trays that support them, print the Paper Tips page from your printers control panel.

Media Type

Plain Paper

Card Stock

Heavy Plain Paper

Transparency

Thin Card Stock

Thick Card Stock

Extra Thick Card Stock

Envelope

Labels

Letterhead

Glossy Paper

Colored Paper

Preprinted

Prepunched

Custom

PCL 5 Command

<Esc>&n6WdPaper

<Esc>&n10WCardStock

<Esc>&n11WdHeavyPaper

<Esc>&n13WdTransparency

<Esc>&n14WdThinCardStock

<Esc>&n15WdThickCardStock

<Esc>&20WdExtraThickCardStock

<Esc>&n9WdEnvelope

<Esc>&n6WdLabel

<Esc>&n11WdLetterhead

<Esc>&n12WdPaper

<Esc>&n13WdColoredPaper

<Esc>&n11WdPreprinted

<Esc>&n11WdPrepunched

<Esc>&n12WCustomType1 through

<Esc>&n12WCustomType5

System Administrator Guide

B-3

Phaser PCL Commands

Input Trays

The following table lists the most common PCL commands for the input trays supported by your printer. The table also lists the alternate tray used if the optional input tray is not installed.

Note: When more than one command is listed, you can use either command.

Input Trays PCL 5 Command

*

Alternate Tray

Tray 1 (MPT) in multi-sheet mode

Tray 1 (MPT) in manual feed mode

<Esc>&l4H

<Esc>&6H

<Esc>&l2H

<Esc>&l3H n/a n/a

Tray 2

Tray 3

Tray 4

<Esc>&l1H

<Esc>&l5H n/a

Tray 2

Tray 1 <Esc>&l8H

<Esc>&l20H

<Esc>&l21H Tray 5

Autoselect

Current tray/page eject

<Esc>&l7H

<Esc>&l10H

Tray 1 n/a n/a

* The character that follows the “&” in the command is the lowercase letter “L”.

Output Trays

The following table lists the PCL commands and PJL values for the output trays supported by the your printer.

Output Tray PCL 5 Command

*

PJL Value

Top output tray <Esc>&l1G FACEDOWN, UPPER,

STANDARD, or OFFSET

* The character that follows the “&” in the command is the lowercase letter “L”.

** The PJL Value is used with the PJL “OUTBIN” variable.

System Administrator Guide

B-4

Phaser PJL Commands

Phaser PJL Commands

The following table lists the most commonly used HP PJL and Xerox-unique PJL commands.

See also:

HP Printer Job Language Technical Reference for the standard set of PJL commands.

PJL Command Values Description

@PJL FSDELETE NAME=“

@PJL FSDIRLIST NAME=“

@PJL FSDOWNLOAD FORMAT:BINARY

SIZE= size NAME=“ pathname ”

@PJL FSINIT VOLUME= value

@PJL FSMKDIR NAME=“ pathname ”

*

*

*

@PJL FSUPLOAD NAME=“

@PJL USTATUS

@PJL USTATUSOFF

@PJL FSAPPEND

@PJL XCLIENTJOBID=

@PJL XJAFILENAME=“

@PJL XJAHOSTNAME=“

@PJL XJAJOBNAME=“ pathname pathname pathname value filename jobname ”

” hostname ”

*

*

*

* n/a n/a

Deletes a file from the internal hard drive.

Lists PJL system files and directories.

Downloads a file to the internal hard drive.

Initializes the internal hard drive.

Creates the specified directory on the internal hard drive.

Uploads file from the printer to the host.

Allows the printer to send unsolicited status messages for device status changes, end-of-job status, and pages printed. Status can be sent at specified time intervals.

Turns off all status responses.

Appends data to an existing file, or if the file doesn’t exist, creates the file and loads it with the given data.

Sets the client job id used with

PrintingScout.

Exactly 48 bytes

(first byte is 8 and the 8 last bytes represent a time in the format hhmmsshs .

Roman-8 characters

1-255

Roman-8 characters

1-255

Roman-8 characters

1-255

Sets the file name for Job

Accounting.

Sets the host name for Job

Accounting.

Sets the job name for Job

Accounting.

System Administrator Guide

B-5

PJL Command

@PJL XJAUSERNAME=“ username ”

@PJL XJOBPASSWORD= value

@PJL XPERSONALJOB

@PJL XPROOFJOB

@PJL XSAVEDJOB

@PJL XSECUREJOB

@PJL XIGNOREFF

@PJL XLINETERMINATION= value

@PJL XMBFSIZE= value

@PJL XMEDIASOURCE=v alue

@PJL XMEDIATYPE= value

@PJL XPCLTRAYSWITCH= value

Phaser PJL Commands

Values

Roman-8 characters

1-255

4-digit string (1-9)

Description

Sets the user name for Job

Accounting.

n/a n/a n/a n/a

ON, OFF

Assigns the job password used by Secure Print.

Starts a Personal Print job.

Starts a Proof Print job.

Starts a Saved Print job.

Starts a Secure Print job.

Ignores FormFeed commands when printing PCL blank pages.

Terminates a line.

Sets the media size for Tray 1.

ON, OFF

ANY or any supported media size, such as

LETTER,

STATEMENT, and

EXECUTIVE.

ANY, TRAY n

ANY or any supported media type, such as

PAPER and

LABEL.

ON, OFF

Sets the media source.

Sets the media type.

Switches trays when a tray goes empty. If AutoSelect is chosen as the paper source (tray) in PCL, then tray switching is always active, regardless of the value.

When the current tray goes empty, the printer attempts to switch to another tray containing the same size and type of paper.

This command only takes effect when a specific tray, such as

Tray 2, is selected in the job.

When this command is ON, tray switching still occurs when the tray goes empty. When this command is OFF, no switching occurs and the user is prompted to load paper.

System Administrator Guide

B-6

Phaser PJL Commands

PJL Command Values Description

@PJL XPCLPAPERSRC x = y x is 0, 1, 2, 3, 4, 5,

6, 7, 8, 20, 21, 22,

23, which is the number in the

<Esc>&l#H tray selection commands.

y is -1 for

AutoSelect, 0 for the current tray

(eject page), 1 for

Tray 1, 2 for Tray 2, etc., and 99 for the factory defaults.

Overrides the tray selected in the

<Esc>&l#H PCL tray selection commands.

* See the HP Printer Job Language Technical Reference for the values.

System Administrator Guide

B-7

Acknowledgements

Original SSLeay License

Copyright © 1995-1998 Eric Young ([email protected]). All rights reserved.

This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscape’s SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is

Tim Hudson ([email protected]).

Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

All advertising materials mentioning features or use of this software must display the following acknowledgement:

“This product includes cryptographic software written by Eric Young

([email protected]).”

The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related.

If you include any Windows specific code (or a derivative thereof) from the apps directory

(application code) you must include an acknowledgement:

“This product includes software written by Tim Hudson ([email protected]).”

System Administrator Guide

C-1

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

The license and distribution terms for any publicly available version or derivative of this code cannot be changed, i.e., this code cannot simply be copied and put under another distribution license [including the GNU Public License.]

Net-SNMP License

Part 1: CMU/UCD copyright notice: (BSD like) -----

Copyright © 1989, 1991, 1992 by Carnegie Mellon University

Derivative Work - 1996, 1998-2000

Copyright © 1996, 1998-2000 The Regents of the University of California

All rights reserved.

Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU and The Regents of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission.

CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL

WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU

OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY

SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES

WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR PROFITS,

WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS

ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

System Administrator Guide

C-2

Part 2: Networks Associates Technology, Inc. copyright notice (BSD) -----

Copyright © 2001-2003, Networks Associates Technology, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

System Administrator Guide

C-3

Part 3: Cambridge Broadband Ltd. copyright notice (BSD) -----

Copyright © 2001-2003, Cambridge Broadband Ltd.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER “AS IS”' AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF

THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Part 4: Sun Microsystems, Inc. copyright notice (BSD) -----

Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California

95054, U.S.A. All rights reserved.

Use is subject to license terms below.

This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS”AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

System Administrator Guide

C-4

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Part 5: Sparta, Inc. copyright notice (BSD) -----

Copyright © 2003-2004, Sparta, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS”' AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

System Administrator Guide

C-5

VxWorks

This product may include software licensed to Wind River by third parties. The following notices are provided to comply with the terms of such licenses.

Wind River VxWorks

This product may include software developed by WIDE Project and its contributors.

Permission to use, copy, modify and distribute this software and its documentation is hereby granted, provided only with the following conditions are satisfied: 1. Both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof, and that both notices appear in supporting documentation.

2. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by WIDE Project and its contributors. 3. Neither the name of WIDE Project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE DEVELOPER “AS IS” AND WIDE

PROJECT DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES

WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. ALSO, THERE IS

NO WARRANTY IMPLIED OR OTHERWISE, NOR IS SUPPORT PROVIDED. Feedback of the results generated from any improvements or extensions made to this software would be much appreciated. Any such feedback should be sent to: Akihiro Tominaga WIDE Project

Keio University, Endo 5322, Kanagawa, Japan (E-mail: [email protected]

). WIDE project has the rights to redistribute these changes.

This product may include software developed by Applied Microsystems Corp.

This product may include software developed by the Australian National University.

Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the Australian National University. The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED “AS IS” AND

WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT

LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

This product may include software developed by Carnegie Mellon University. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by Carnegie Mellon University. The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE

IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

System Administrator Guide

C-6

This product may include software copyright David A. Hinds. Use, redistribution, and modification of this code is permitted subject to the following conditions: 1. Redistribution of this code must preserve this copyright notice. 2. Binary distributions must include this notice and disclaimer. 3. Advertising materials that refer to specific features of this product must acknowledge the author. 4. The author’s name may not be used to endorse or promote any product derived from this software without written permission. This software is provided “as is,” with no explicit or implied warranties. If you make improvements to this software, I’d appreciate if you would send me the details of what you’ve done. –David Hinds [email protected]

.

This product may include software copyright 1993 Digital Equipment Corporation.

Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies, and that the name of Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the document or software without specific, written prior permission. THE SOFTWARE IS PROVIDED “AS IS” AND DIGITAL

EQUIPMENT CORP. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS

SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT CORPORATION BE

LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES

OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR

PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER

TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

This product may include cryptographic software written by Eric Young

( [email protected]

). This package is an SSL implementation written by Eric Young

( [email protected]

). The implementation was written so as to conform with Netscape’s

SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is

Tim Hudson ( [email protected]

). Copyright remains Eric Young’s, and as such any

Copyright notices in the code are not to be removed. If this package is used in a product, Eric

Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young ( [email protected]

)” The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related. 4. If you include any

Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This product includes software written by Tim Hudson

( [email protected]

)” THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

System Administrator Guide

C-7

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE. The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution license [including the GNU Public License].

This product may include software developed and copyrighted by Gregory M. Christy.

Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by Gregory M. Christy. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE

IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

This product may include software copyright Hannu Savolainen 1993–1999. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS

“AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product may include software copyright IBM Corporation.

This product may include software copyright Intel Corporation. Intel hereby grants you permission to copy, modify, and distribute this software and its documentation. Intel grants this permission provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation. In addition,

Intel grants this permission provided that you prominently mark as not part of the original any modifications made to this software or documentation, and that the name of Intel Corporation

System Administrator Guide

C-8

not be used in advertising or publicity pertaining to distribution of the software or the documentation without specific, written prior permission. Intel Corporation does not warrant, guarantee or make any representations regarding the use of, or the results of the use of, the software and documentation in terms of correctness, accuracy, reliability, currentness, or otherwise; and you rely on the software, documentation and results solely at your own risk.

This product may include software copyright Jean-loup Gailly and Mark Adler.

This product may include software implementing the RSA Data Security, Inc. “MD5

Message-Digest Algorithm,” provided under license from RSA Data Security, Inc.

The product includes software developed by the University of California, Berkeley and its contributors. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. 4. Neither the name of the

University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS

PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS

OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

This product may include software copyright 1998 Todd C. Miller

[email protected]

. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED “AS IS”

AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS

SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL,

DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES

WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN

AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,

ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF

THIS SOFTWARE.

This product may include software copyright © 1998, 1999, 2000 Thai Open Source Software

Center Ltd. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish,

System Administrator Guide

C-9

distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the

Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the

Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY

KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE

AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

DEALINGS IN THE SOFTWARE.

This product may include software provided by eclipse.org (Eclipse Software), and licensed under the terms of the Common Public License (CPL) and/or other licenses and agreements.

THE ECLIPSE SOFTWARE IS PROVIDED BY ECLIPSE.ORG AND ITS

CONTRIBUTORS ON AN “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS

OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT

LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE,

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. NEITHER ECLIPSE.ORG NOR ANY CONTRIBUTORS SHALL HAVE ANY

LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST

PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE

ECLIPSE SOFTWARE OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any provisions of the license(s) applicable to the Eclipse Software that differ from the terms specified in any Wind

River license agreement made applicable to the Eclipse Software are offered by Wind River only. The source code for the Eclipse Software is available from Wind River upon request under the terms of the applicable license(s).

This product may include software copyright © 1996 John D. Polstra and Matt Thomas [email protected]

. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by John Polstra. 4. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS

IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

System Administrator Guide

C-10

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

This product may include software copyright © 2003 Ericsson Research Canada. All rights reserved.

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of Ericsson Research

Canada nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

This product may include software copyright © 2003, Dániel Dékány. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name "FMPP" nor the names of the project contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

System Administrator Guide

C-11

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

This product contains software developed by the Apache Software Foundation

( www.apache.org/ ).

This product contains ANTLR software. www.antlr.org/

This product contains software copyright © 1992–1996 Paul Falstad. All rights reserved.

Permission is hereby granted, without written agreement and without license or royalty fees, to use, copy, modify, and distribute this software and to distribute modified versions of this software for any purpose, provided that the above copyright notice and the following two paragraphs appear in all copies of this software.

In no event shall Paul Falstad or the Zsh Development Group be liable to any party for direct, indirect, special, incidental, or consequential damages arising out of the use of this software and its documentation, even if Paul Falstad and the Zsh Development Group have been advised of the possibility of such damage.

Paul Falstad and the Zsh Development Group specifically disclaim any warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The software provided hereunder is on an "as is" basis, and Paul Falstad and the Zsh

Development Group have no obligation to provide maintenance, support, updates, enhancements, or modifications.

This product contains software developed by the Visigoth Software Society

( www.visigoths.org/ ).

GNU Toolkit

This product may contain some of the runtime libraries that are a part of the GNU gcc compiler collection. These gcc runtime libraries are licensed under the terms of the GNU

Lesser General Public License (LGPL). Consequently, if you distribute the gcc libraries, or distribute software which links with the gcc libraries, then you have certain obligations under the LGPL. For example, you may have to provide the source code for the gcc libraries, as well as the files necessary to build the software which uses the libraries. Refer to the text of the

LGPL for the specific requirements. A copy of the LGPL can be found at the end of this file.

Wind River IPsec and IKE, SSL, Security Libraries

This product may include software developed by the OpenSSL Project for use in the OpenSSL

Toolkit ( www.openssl.org/ ). The text of the OpenSSL license agreement can be found at the end of this file.

System Administrator Guide

C-12

SNiFF+/SNiFF+ PRO

Copyright © 1992–1997 Compuware Corporation

Copyright © 1984–1997 FairCom Corporation

Copyright © 1996–2000 Greg Stein and Mark Hammond

Copyright © 1999 The Apache Software Foundation

Copyright © 2001 Xperts Software

Wind River USB Host Stack

This product may include software developed by Wipro Limited.

WIND MEDIA LIBRARY

This product may include software copyright © Adobe Systems Incorporated and Digital

Equipment Corporation.

Adobe is a trademark of Adobe Systems Incorporated which may be registered in certain jurisdictions. Permission to use these trademarks is hereby granted only in association with the images described in this file. Permission to use, copy, modify, distribute and sell this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notices appear in all copies and that both those copyright notices and this permission notice appear in supporting documentation, and that the names of Adobe Systems and Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Adobe Systems and

Digital Equipment Corporation make no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.

This product may include software copyright © 1989 Sun Microsystems, Inc. Sun design patents pending in the U.S. and foreign countries. OPEN LOOK is a trademark of AT&T.

Used by written permission of the owners. Copyright © Bigelow & Holmes 1986, 1985.

Lucida is a registered trademark of Bigelow & Holmes. Permission to use the Lucida trademark is hereby granted only in association with the images and fonts described in this file.

This product may include software copyright 1998–1999 Precision Insight, Inc., Cedar Park,

Texas. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sub license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NON-INFRINGEMENT. IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS

SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

System Administrator Guide

C-13

WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

DEALINGS IN THE SOFTWARE.

This product may contain software that is based in part on the work of the Independent JPEG

Group.

Wind River PPP

This product may include software copyright © Carnegie Mellon University. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by Carnegie Mellon University. The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED “AS IS” AND WITHOUT ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE

IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

This product may include software copyright © The Regents of the University of California.

All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. 4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS

PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS

OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

This product may include software derived from the RSA Data Security, Inc. MD5

Message-Digest Algorithm, and copyright © RSA Data Security, Inc. All rights reserved.

License to copy and use this software is granted provided that it is identified as the “RSA Data

Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing this software or this function. License is also granted to make and use derivative works provided that such works are identified as “derived from the RSA Data Security, Inc. MD5

Message-Digest Algorithm” in all material mentioning or referencing the derived work. RSA

System Administrator Guide

C-14

Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind. These notices must be retained in any copies of any part of this documentation and/or software.

WIND MANAGE XML/SOAP

This product may include software developed by the gSOAP project. gSOAP is copyrighted and owned by Robert A. van Engelen ( www.cs.fsu.edu/~engelen/soap.html

). The gSOAP license allows for commercial use of gSOAP. It also allows products to be built on top and distributed under any license (including commercial). Products developed with gSOAP should include a notice of copyright and a disclaimer of warranty in the product’s documentation

(License Exhibit B).

gSOAP source code modifications that are distributed as part of an open source product should be submitted back to us for quality control. Please note that modifications to the gSOAP runtime source codes are not required to build applications so this requirement should not prohibit (commercial) product development in any way.

The text of the gSOAP Public License for the version included here can be found at the end of this file.

This product may include software developed by the Expat project

( sourceforge.net/projects/expat/ ). This software is covered by the MIT License. The text of the license is as follows:

Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper

Copyright © 2001, 2002 Expat maintainers.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the

Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT.

IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR

ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF

CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION

WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

System Administrator Guide

C-15

Other

Components of this product, including without limitation Wind River Workbench, Tornado,

VxWorks, and Wind River PPP, include software derived from the RSA Data Security, Inc.

MD5 Message-Digest Algorithm, and copyright © RSA Data Security, Inc. All rights reserved. License to copy and use this software is granted provided that it is identified as the

“RSA Data Security, Inc. MD5 Message-Digest Algorithm” in all material mentioning or referencing this software or this function. License is also granted to make and use derivative works provided that such works are identified as “derived from the RSA Data Security, Inc.

MD5 Message-Digest Algorithm” in all material mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind. These notices must be retained in any copies of any part of this documentation and/or software.

This product contains the ‘zlib’ general purpose compression library version 1.1.4, March

11th, 2002 Copyright © 1995–2002 Jean-loup Gailly and Mark Adler.

This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software.

If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution.

Info-Zip License

This product contains software copyright (c) 1990-2005 Info-ZIP. All rights reserved.

For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of individuals:

Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup

Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert

Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der

Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov,

Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler, Antoine

Verheijen, Paul von Behren, Rich Wales, Mike White

This software is provided "as is," without warranty of any kind, express or implied. In no event shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special or consequential damages arising out of the use of or inability to use this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1.

Redistributions of source code must retain the above copyright notice, definition, disclaimer, and this list of conditions.

2.

Redistributions in binary form (compiled executables) must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution. The sole exception to this condition is

System Administrator Guide

C-16

redistribution of a standard UnZipSFX binary (including SFXWiz) as part of a selfextracting archive; that is permitted without inclusion of this license, as long as the normal SFX banner has not been removed from the binary or disabled.

3.

Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, and dynamic, shared, or static library versions--must be plainly marked as such and must not be misrepresented as being the original source.

Such altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names

"Info-ZIP" (or any variation thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the explicit permission of

Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the

Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIP URL(s).

4.

Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "UnZipSFX,"

"WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.

Tcl/Tk

This product may contain software copyrighted by the Regents of the University of California,

Sun Microsystems, Inc., Scriptics Corporation, and other parties. The following terms apply to all files associated with the software unless explicitly disclaimed in individual files.

The authors hereby grant permission to use, copy, modify, distribute, and license this software and its documentation for any purpose, provided that existing copyright notices are retained in all copies and that this notice is included verbatim in any distributions. No written agreement, license, or royalty fee is required for any of the authorized uses. Modifications to this software may be copyrighted by their authors and need not follow the licensing terms described here, provided that the new terms are clearly indicated on the first page of each file where they apply.

IN NO EVENT SHALL THE AUTHORS OR DISTRIBUTORS BE LIABLE TO ANY

PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OF THIS SOFTWARE, ITS DOCUMENTATION,

OR ANY DERIVATIVES THEREOF, EVEN IF THE AUTHORS HAVE BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGE.

THE AUTHORS AND DISTRIBUTORS SPECIFICALLY DISCLAIM ANY

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND

NON-INFRINGEMENT. THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, AND

THE AUTHORS AND DISTRIBUTORS HAVE NO OBLIGATION TO PROVIDE

MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.

System Administrator Guide

C-17

GOVERNMENT USE: If you are acquiring this software on behalf of the U.S. government, the Government shall have only "Restricted Rights" in the software and related documentation as defined in the Federal Acquisition Regulations (FARs) in Clause 52.227.19 (c) (2). If you are acquiring the software on behalf of the Department of Defense, the software shall be classified as "Commercial Computer Software" and the Government shall have only

"Restricted Rights" as defined in Clause 252.227-7013 (c) (1) of DFARs. Notwithstanding the foregoing, the authors grant the U.S. Government and others acting in its behalf permission to use and distribute the software in accordance with the terms specified in this license.

This product may contain software copyright © 1987–2003 Larry Wall.

The Perl Artistic License

Preamble

The intent of this document is to state the conditions under which a Package may be copied, such that the Copyright Holder maintains some semblance of artistic control over the development of the package, while giving the users of the package the right to use and distribute the Package in a more-or-less customary fashion, plus the right to make reasonable modifications.

Definitions

"Package" refers to the collection of files distributed by the Copyright Holder, and derivatives of that collection of files created through textual modification.

"Standard Version" refers to such a Package if it has not been modified, or has been modified in accordance with the wishes of the Copyright Holder as specified below.

"Copyright Holder" is whoever is named in the copyright or copyrights for the package.

"You" is you, if you're thinking about copying or distributing this Package.

"Reasonable copying fee" is whatever you can justify on the basis of media cost, duplication charges, time of people involved, and so on. (You will not be required to justify it to the

Copyright Holder, but only to the computing community at large as a market that must bear the fee.)

"Freely Available" means that no fee is charged for the item itself, though there may be fees involved in handling the item. It also means that recipients of the item may redistribute it under the same conditions they received it.

1.

You may make and give away verbatim copies of the source form of the Standard Version of this Package without restriction, provided that you duplicate all of the original copyright notices and associated disclaimers.

2.

You may apply bug fixes, portability fixes and other modifications derived from the Public

Domain or from the Copyright Holder. A Package modified in such a way shall still be considered the Standard Version.

System Administrator Guide

C-18

3.

You may otherwise modify your copy of this Package in any way, provided that you insert a prominent notice in each changed file stating how and when you changed that file, and provided that you do at least ONE of the following: a. place your modifications in the Public Domain or otherwise make them Freely

Available, such as by posting said modifications to Usenet or an equivalent medium, or placing the modifications on a major archive site such as uunet.uu.net, or by allowing the

Copyright Holder to include your modifications in the Standard Version of the Package.

b. use the modified Package only within your corporation or organization.

c. rename any non-standard executables so the names do not conflict with standard executables, which must also be provided, and provide a separate manual page for each non-standard executable that clearly documents how it differs from the Standard Version.

d. make other distribution arrangements with the Copyright Holder.

4.

You may distribute the programs of this Package in object code or executable form, provided that you do at least ONE of the following: a. distribute a Standard Version of the executables and library files, together with instructions (in the manual page or equivalent) on where to get the Standard Version.

b. accompany the distribution with the machine-readable source of the Package with your modifications.

c. give non-standard executables non-standard names, and clearly document the differences in manual pages (or equivalent), together with instructions on where to get the

Standard Version.

d. make other distribution arrangements with the Copyright Holder.

5.

You may charge a reasonable copying fee for any distribution of this Package. You may charge any fee you choose for support of this Package. You may not charge a fee for this

Package itself. However, you may distribute this Package in aggregate with other (possibly commercial) programs as part of a larger (possibly commercial) software distribution provided that you do not advertise this Package as a product of your own. You may embed this Package's interpreter within an executable of yours (by linking); this shall be construed as a mere form of aggregation, provided that the complete Standard Version of the interpreter is so embedded.

6.

The scripts and library files supplied as input to or produced as output from the programs of this Package do not automatically fall under the copyright of this Package, but belong to whomever generated them, and may be sold commercially, and may be aggregated with this Package. If such scripts or library files are aggregated with this Package via the so-called "undump" or "unexec" methods of producing a binary executable image, then distribution of such an image shall neither be construed as a distribution of this Package nor shall it fall under the restrictions of Paragraphs 3 and 4, provided that you do not represent such an executable image as a Standard Version of this Package.

7.

C subroutines (or comparably compiled subroutines in other languages) supplied by you and linked into this Package in order to emulate subroutines and variables of the language defined by this Package shall not be considered part of this Package, but are the equivalent of input as in Paragraph 6, provided these subroutines do not change the language in any way that would cause it to fail the regression tests for the language.

System Administrator Guide

C-19

8.

Aggregation of this Package with a commercial distribution is always permitted provided that the use of this Package is embedded; that is, when no overt attempt is made to make this Package's interfaces visible to the end user of the commercial distribution. Such use shall not be construed as a distribution of this Package.

9.

The name of the Copyright Holder may not be used to endorse or promote products derived from this software without specific prior written permission.

10.

THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED

WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

The End

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

Copyright © 1991, 1999 Free Software Foundation, Inc.

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU

Library Public License, version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away your freedom to share and change it.

By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software—to make sure the software is free for all its users.

This license, the Lesser General Public License, applies to some specially designated software packages—typically libraries—of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.

When we speak of free software, we are referring to freedom of use, not price. Our General

Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights.

System Administrator Guide

C-20

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.

To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others.

Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder.

Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered by the ordinary GNU General Public

License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.

When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.

We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.

For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the

GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.

Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

System Administrator Guide

C-21

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND

MODIFICATION

1.

This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.

A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables.

The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term

“modification”.)

“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this

License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it).

Whether that is true depends on what the Library does and what the program that uses the

Library does.

2.

You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

3.

You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a. The modified work must itself be a software library.

b. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.

c. You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d. If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.

System Administrator Guide

C-22

(For example, a function in a library to compute square roots has a purpose that is entirely welldefined independent of the application. Therefore, Subsection 2d requires that any applicationsupplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.

In addition, mere aggregation of another work not based on the Library with the Library

(or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

4.

You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary

GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary

GNU General Public License applies to all subsequent copies and derivative works made from that copy.

This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

5.

You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.

6.

A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the

Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.

However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a

“work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.

System Administrator Guide

C-23

When a “work that uses the Library” uses material from a header file that is part of the

Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.

If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work.

(Executables containing this object code plus portions of the Library will still fall under

Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.

7.

As an exception to the Sections above, you may also combine or link a “work that uses the

Library” with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this

License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a. Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the

Library, with the complete machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b. Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.

c. Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.

d. If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.

e. Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

System Administrator Guide

C-24

For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components

(compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.

8.

You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a. Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.

b. Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.

9.

You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

10.

You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works.

These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.

11.

Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.

12.

If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.

System Administrator Guide

C-25

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

13.

If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

14.

The Free Software Foundation may publish revised and/or new versions of the Lesser

General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.

15.

If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software

Foundation; we sometimes make exceptions for this.

Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

1.

BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO

WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY

APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE

COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS

IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE

ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS

WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE

COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

System Administrator Guide

C-26

2.

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN

WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY

MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE

LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF

DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY

YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH

ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.

<one line to give the library’s name and a brief idea of what it does.>

Copyright (C) <year> <name of author>

This library is free software; you can redistribute it and/or modify it under the terms of the

GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY

WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330,

Boston, MA 02111-1307 USA

Also add information on how to contact you by electronic and paper mail.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker.

signature of Ty Coon, 1 April 1990

Ty Coon, President of Vice

That’s all there is to it!

System Administrator Guide

C-27

OpenSSL License

OpenSSL License

Copyright © 1998–2003 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1.

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2.

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3.

All advertising materials mentioning features or use of this software must display the following acknowledgment:

“This product includes software developed by the OpenSSL Project for use in the

OpenSSL Toolkit. (http://www.openssl.org/)”

4.

The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected].

5.

Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.

6.

Redistributions of any form whatsoever must retain the following acknowledgment:

“This product includes software developed by the OpenSSL Project for use in the

OpenSSL Toolkit (http://www.openssl.org/)”

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY

EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL

PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR

SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN

IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]).

This product includes software written by Tim Hudson ([email protected]).

System Administrator Guide

C-28

gSOAP Public License

Version 1.3a

The gSOAP public license is derived from the Mozilla Public License (MPL1.1). The sections that were deleted from the original MPL1.1 text are 1.0.1, 2.1.(c),(d), 2.2.(c),(d), 8.2.(b), 10, and 11. Section 3.8 was added. The modified sections are 2.1.(b), 2.2.(b), 3.2 (simplified), 3.5

(deleted the last sentence), and 3.6 (simplified).

1. DEFINITIONS

1.0.1.

1.1. “Contributor” means each entity that creates or contributes to the creation of

Modifications.

1.2. “Contributor Version” means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor.

1.3. “Covered Code” means the Original Code, or Modifications or the combination of the

Original Code, and Modifications, in each case including portions thereof.

1.4. “Electronic Distribution Mechanism” means a mechanism generally accepted in the software development community for the electronic transfer of data.

1.5. “Executable” means Covered Code in any form other than Source Code.

1.6. “Initial Developer” means the individual or entity identified as the Initial Developer in the

Source Code notice required by Exhibit A.

1.7. “Larger Work” means a work which combines Covered Code or portions thereof with code not governed by the terms of this License.

1.8. “License” means this document.

1.8.1. “Licensable” means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein.

1.9. “Modifications” means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a Modification is:

A. Any addition to or deletion from the contents of a file containing Original Code or previous

Modifications.

B. Any new file that contains any part of the Original Code, or previous Modifications.

1.10. “Original Code” means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code, and which, at the time of its release under this License is not already Covered Code governed by this License.

1.10.1. “Patent Claims” means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor.

System Administrator Guide

C-29

1.11. “Source Code” means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor’s choice. The Source Code can be in a compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge.

1.12. “You” (or “Your”) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under

Section 6.1. For legal entities, “You” includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, “control” means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.

2. SOURCE CODE LICENSE

2.1. The Initial Developer Grant.

10/26/2005 28

The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:

(a) under intellectual property rights (other than patent or trademark) Licensable by Initial

Developer to use, reproduce, modify, display, perform, sublicense and distribute the

Original Code (or portions thereof) with or without Modifications, and/or as part of a

Larger Work; and

(b) under patents now or hereafter owned or controlled by Initial Developer, to make, have made, use and sell (“offer to sell and import”) the Original Code, Modifications, or portions thereof, but solely to the extent that any such patent is reasonably necessary to enable You to utilize, alone or in combination with other software, the Original Code,

Modifications, or any combination or portions thereof.

2.2. Contributor Grant.

Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty free, nonexclusive license

(a) under intellectual property rights (other than patent or trademark) Licensable by

Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the

Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and

(b) under patents now or hereafter owned or controlled by Contributor, to make, have made, use and sell (“offer to sell and import”) the Contributor Version (or portions thereof), but solely to the extent that any such patent is reasonably necessary to enable You to utilize, alone or in combination with other software, the Contributor Version (or portions thereof).

System Administrator Guide

C-30

3. DISTRIBUTION OBLIGATIONS

3.1. Application of License.

The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered

Code may be distributed only under the terms of this License or a future version of this

License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose any terms on any Source

Code version that alters or restricts the applicable version of this License or the recipients’ rights hereunder. However, You may include an additional document offering the additional rights described in Section 3.5.

3.2. Availability of Source Code.

Any Modification created by You will be provided to the Initial Developer in Source Code form and are subject to the terms of the License.

3.3. Description of Modifications.

You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any change. You must include a prominent statement that the Modification is derived, directly or indirectly, from Original

Code provided by the Initial Developer and including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code.

3.4. Intellectual Property Matters.

(a) Third Party Claims. If Contributor has knowledge that a license under a third party’s intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled “LEGAL” which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2,

Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or news groups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained.

(b) Contributor APIs. If Contributor’s Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the

LEGAL file.

(c) Representations. Contributor represents that, except as disclosed pursuant to Section

3.4(a) above, Contributor believes that Contributor’s Modifications are Contributor’s original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License.

System Administrator Guide

C-31

3.5. Required Notices.

You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a

Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients’ rights or ownership rights relating to Covered Code.

You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor.

3.6. Distribution of Executable Versions.

You may distribute Covered Code in Executable form only if the requirements of Section 3.1–

3.5 have been met for that Covered Code. You may distribute the Executable version of

Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient’s rights in the Source Code version from the rights set forth in this License. If You distribute the

Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any

Contributor. If you distribute executable versions containing Covered Code as part of a product, you must reproduce the notice in Exhibit B in the documentation and/or other materials provided with the product.

3.7. Larger Works.

You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case,

You must make sure the requirements of this License are fulfilled for the Covered Code.

3.8. Restrictions.

You may not remove any product identification, copyright, proprietary notices or labels from gSOAP.

4. INABILITY TO COMPLY DUE TO STATUTE OR REGULATION

If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code.

Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it.

5. APPLICATION OF THIS LICENSE

This License applies to code to which the Initial Developer has attached the notice in Exhibit

A and to related Covered Code.

System Administrator Guide

C-32

6. VERSIONS OF THE LICENSE

6.1. New Versions.

Grantor may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number.

6.2. Effect of New Versions.

Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such

Covered Code under the terms of any subsequent version of the License.

6.3. Derivative Works.

If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrase “gSOAP” or any confusingly similar phrase do not appear in your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the gSOAP Public License.

(Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.)

7. DISCLAIMER OF WARRANTY

COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS,

WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED OR

STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF

MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE,

NONINFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS, AND

ANY WARRANTY THAT MAY ARISE BY REASON OF TRADE USAGE, CUSTOM, OR

COURSE OF DEALING. WITHOUT LIMITING THE FOREGOING, YOU

ACKNOWLEDGE THAT THE SOFTWARE IS PROVIDED “AS IS” AND THAT THE

AUTHORS DO NOTWARRANT THE SOFTWAREWILL RUN UNINTERRUPTED OR

ERROR FREE. LIMITED LIABILITY THE ENTIRE RISK AS TO RESULTS AND

PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. UNDER NO

CIRCUMSTANCES WILL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT,

INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES OF ANY KIND OR

NATURE WHATSOEVER, WHETHER BASED ON CONTRACT, WARRANTY, TORT

(INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, ARISING OUT

OF OR IN ANY WAY RELATED TO THE SOFTWARE, EVEN IF THE AUTHORS HAVE

BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGE OR IF SUCH DAMAGE

COULD HAVE BEEN REASONABLY FORESEEN, AND NOTWITHSTANDING ANY

FAILURE OF ESSENTIAL PURPOSE OF ANY EXCLUSIVE REMEDY PROVIDED.

SUCH LIMITATION ON DAMAGES INCLUDES, BUT IS NOT LIMITED TO, DAMAGES

FOR LOSS OF GOODWILL, LOST PROFITS, LOSS OF DATA OR SOFTWARE, WORK

STOPPAGE, COMPUTER FAILURE OR MALFUNCTION OR IMPAIRMENT OF OTHER

GOODS. IN NO EVENTWILL THE AUTHORS BE LIABLE FOR THE COSTS OF

PROCUREMENT OF SUBSTITUTE SOFTWARE OR SERVICES. YOU ACKNOWLEDGE

THAT THIS SOFTWARE IS NOT DESIGNED FOR USE IN ON-LINE EQUIPMENT IN

HAZARDOUS ENVIRONMENTS SUCH AS OPERATION OF NUCLEAR FACILITIES,

AIRCRAFT NAVIGATION OR CONTROL, OR LIFE-CRITICAL APPLICATIONS.

System Administrator Guide

C-33

THE AUTHORS EXPRESSLY DISCLAIM ANY LIABILITY RESULTING FROM USE OF

THE SOFTWARE IN ANY SUCH ON-LINE EQUIPMENT IN HAZARDOUS

ENVIRONMENTS AND ACCEPTS NO LIABILITY IN RESPECT OF ANY ACTIONS OR

CLAIMS BASED ON THE USE OF THE SOFTWARE IN ANY SUCH ONLINE

EQUIPMENT IN HAZARDOUS ENVIRONMENTS BY YOU. FOR PURPOSES OF THIS

PARAGRAPH, THE TERM “LIFE-CRITICAL APPLICATION” MEANS AN

APPLICATION IN WHICH THE FUNCTIONING OR MALFUNCTIONING OF THE

SOFTWARE MAY RESULT DIRECTLY OR INDIRECTLY IN PHYSICAL INJURY OR

LOSS OF HUMAN LIFE. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN

ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS

AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.

8. TERMINATION

8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this License shall survive.

8.2.

8.3. If You assert a patent infringement claim against Participant alleging that such

Participant’s Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections

2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license.

8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination.

9. LIMITATION OF LIABILITY

UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT

(INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE

INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF

COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO

ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES

FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR

MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES,

EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF

SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO

LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY’S

NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION.

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND

LIMITATION MAY NOT APPLY TO YOU.

System Administrator Guide

C-34

10. U.S. GOVERNMENT END USERS

11. MISCELLANEOUS

12. RESPONSIBILITY FOR CLAIMS

As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and

You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability.

EXHIBIT A.

“The contents of this file are subject to the gSOAP Public License Version 1.3 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the

License at www.genivia.com/products/gsoap/license.html

Software distributed under the License is distributed on an “AS IS” basis, WITHOUT

WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License.

The Original Code of the gSOAP Software is: stdsoap.h, stdsoap2.h, stdsoap.c, stdsoap2.c, stdsoap.cpp, stdsoap2.cpp, soapcpp2.h, soapcpp2.c, soapcpp2_lex.l, soapcpp2_yacc.y, error2.h, error2.c, symbol2.c, init2.c, soapdoc2.html, and soapdoc2.pdf, httpget.h, httpget.c, stl.h, stldeque.h, stllist.h, stlvector.h, stlset.h.

The Initial Developer of the Original Code is Robert A. van Engelen. Portions created by

Robert A. van Engelen are Copyright (c) 2001–2004 Robert A. van Engelen, Genivia inc. All

Rights Reserved.

Contributor(s):

“________________________.”

[Note: The text of this Exhibit A may differ slightly form the text of the notices in the Source

Code files of the Original code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications.]

System Administrator Guide

C-35

EXHIBIT B.

“Part of the software embedded in this product is gSOAP software.

Portions created by gSOAP are Copyright (c) 2001–2004 Robert A. van Engelen, Genivia inc.

All Rights Reserved.

THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.”

System Administrator Guide

C-36

Index

A

about the configuration file, 2-2

access control lists, 4-4

definition, 6-1

specifying access to printer settings, 4-8

specifying printer access using SNMP,

4-22

specifying printing access, 4-9

access to color printing, 4-10

accessing online manuals

using CentreWare IS, 1-5

Admin

Access List, 4-4

account, 4-2

configuring settings, 4-8

definition, 6-1

analyzing printer usage data, 3-5

authentication

definition, 6-1

auto-configuring driver, 2-4

B

basic concepts, 4-2

bi-directional

definition, 6-1

BOOTP

definition, 6-1

C

CentreWare IS, 1-5 accessing online manuals, 1-5

checking printer status, 3-2

checking supplies status, 1-5

configuring Admin and Key User settings, 4-8

configuring the Print Host Access List,

4-9

copying settings from one printer to another, 1-5 defining a network printer, 1-5

definition, 6-1

job accounting, 3-3

locking the control panel, 4-16

printer management software, 1-5

restricting access to SNMP and SSL pages, 4-17

securing the printer, 4-5

selecting

automatic removal of secure, personal, and proof jobs option,

4-13

hard drive overwrite security option,

4-12

jam recovery settings, 5-3

setting up a certificate, 4-6

setting up web browser-based printing system, 1-5 troubleshooting print-quality problems,

1-5

usage profile reports, 3-4

viewing list of networked printers, 1-5

CentreWare Web

accessing, 3-3, 3-14

definition, 6-1

certificates, 4-3

definition, 6-1

root-signed, 4-4

self-signed, 4-3

setting up, 4-6

System Administrator Guide

Index-1

changing

email server settings, 3-10

EtherTalk settings, 3-13

FTP settings, 3-9

hard drive overwrite security setting,

4-11

IPP settings, 3-8

LPR settings, 3-8

mDNS settings, 2-5

Port 9100 settings, 3-7

SLP settings, 2-6

TCP/IP settings, 3-7

checking printer status, 3-2

cloning, 3-14

color printing

access, 4-10

color tables

loading, 2-2

commands, B-1

concepts, 4-2

configuration card, A-1 configuration card parameters, A-1

configuration file, 2-2

configuring

Admin and Key User settings, 4-8

Print Host Access List, 4-9

SNMP Access Control List, 4-22

SNMP for maximum security, 4-17

SSL, 4-7

control panel

locking menus, 4-16

selecting

automatic removal of secure, personal, and proof jobs option,

4-11, 4-12

controlling access to color printing, 4-10

copy printer settings

using CentreWare IS, 1-5

D

DHCP

definition, 6-1

digital certificates, 4-3

disabling

EtherTalk, 3-13

FTP, 3-9

HTTP, 3-6

IPP, 3-8

LPR, 3-8

mDNS, 2-5

Port 9100, 3-7

SLP, 2-6

SNMP, 4-23

TCP/IP, 3-7

discovery protocols, 2-5

DNS

definition, 6-1

driver

auto-configuring, 2-4

definition, 6-2, 6-4

installer, 1-4

Walk-Up printing, 2-3

E email

configuring server settings, 3-10

MaiLinX alerts, 3-12

enabling

EtherTalk, 3-13

FTP, 3-9

IPP, 3-8

LPR, 3-8

mDNS, 2-5

Port 9100, 3-7

SLP, 2-6

TCP/IP, 3-7

EtherTalk, 3-13

definition, 6-2

F

finding printers on the local subnet, 3-2

fonts

loading, 2-2

FTP, 3-9

definition, 6-2

Index

System Administrator Guide

Index-2

Index

G getting help

Knowledge Base, 1-1

PhaserSMART Technical Support, 1-1,

1-2

PrintingScout alerts, 1-2

Technical Support, 1-1

glossary, 6-1

GNU Toolkit, C-12

H hard drive

automatic removal of jobs option, 4-12

installing the printer driver, 2-4

overwrite security option, 4-11 securing, 4-11

host

definition, 6-2

HTTP, 3-6, 4-3

definition, 6-2

HTTPS, 4-3

definition, 6-2

I information

sources, 1-1

installing the printer driver

from the CD-ROM, 2-3

from the hard drive, 2-4

from the web, 2-3

Internet

definition, 6-2

IP

definition, 6-2

IP address

definition, 6-2

IPP, 3-8

definition, 6-2

J

jam recovery, 5-3

job accounting, 3-3

definition, 6-2

log file, 3-3 records, 3-3

job patches

loading, 2-2

jobs

secure, personal, proof, personal saved, print with, and saved print jobs, 5-2

usage profile reports, 3-4

K

Key User

Access List, 4-4

account, 4-2

configuring settings, 4-8

definition, 6-2

Knowledge Base, 1-1

L loading

color tables, 2-2 fonts, 2-2 job patches, 2-2

lockdown procedure, 4-5

locking the control panel menus, 4-16

log file

job accounting, 3-3

LPR, 3-8

definition, 6-2

M

MaiLinX

alerts, 3-12

definition, 6-2

remote printing, 3-11

definition, 6-2

setting up, 3-11

managing printers remotely, 3-2

mDNS, 2-5

definition, 6-3

MIB

definition, 6-3

N

Net-SNMP License, C-2

network

definition, 6-3

network address

definition, 6-3

network configuration file, 2-2

network connection

definition, 6-3

System Administrator Guide

Index-3

Index

O

OpenSSL License, C-28

options

automatic removal of secure, personal, and proof jobs, 4-12

hard drive overwrite security, 4-11

Original SSLeay License, C-1

P

parameters on the configuration card, A-1

PCL

commands, A-1, B-1

definition, 6-3

personal print jobs, 5-2 personal saved print jobs, 5-2

PhaserSMART Technical Support, 1-1, 1-2

PJL

commands, A-1, B-1

definition, 6-3

Port 9100, 3-7

definition, 6-3

PostScript

definition, 6-3

Print Host Access List, 4-4

configuring, 4-9

print with print jobs, 5-2

printer, 2-4

analyzing usage, 3-5

commands, B-1

configuration card parameters, A-1

configuring

from the desktop, 1-5

cost analysis, 3-5

discovery

definition, 6-3

driver

definition, 6-3

installation features, 2-3 walk-up installation, 2-3

securing in a high security environment,

4-5

settings

copy from one printer to another, 1-5

viewing usage information, 3-2

Printer Neighborhood, 3-2

definition, 6-3

printer settings

copy from one printer to another, 1-5

PrintingScout alerts, 1-2

proof print jobs, 5-2

protocols

controlling, 3-6

definition, 6-3

discovery, 2-5

email server, 3-10

EtherTalk, 3-13

FTP, 3-9

HTTP, 3-6

IPP, 3-8

LPR, 3-8

MaiLinX alerts, 3-12

MaiLinX remote printing, 3-11

mDNS, 2-5

Port 9100, 3-7

securing, 3-6

SLP, 2-6

SNMP, 3-9

TCP/IP, 3-7

R records

job accounting, 3-3

remote printing, 3-11

reports

usage analysis, 3-5

usage profile, 3-4

reset NVRAM, 4-16

root-signed certificates, 4-4

S

saved print jobs, 5-2

searching for printers on your network, 3-2

secure print jobs, 5-2

secure, personal, and proof jobs

selecting automatic removal of, 4-12

securing

control panel, 4-16

hard drive, 4-11

printer in a high security environment,

4-5

SNMP and SSL pages, 4-17

selecting

automatic removal of secure, personal, and proof jobs option, 4-12

self-signed certificates, 4-3

sending usage profile reports, 3-4

System Administrator Guide

Index-4

setting up

certificate, 4-6

MaiLinX alerts, 3-12

MaiLinX remote printing, 3-11

usage profile reporting, 3-4

SLP, 2-6

definition, 6-4

Smart Trays, 5-2

definition, 6-4

SMTP

definition, 6-4

SNMP, 3-9

Access List, 4-4

configuring for maximum security, 4-17

configuring the access control list, 4-22

definition, 6-4

disabling, 4-23

specifying the location of the configuration file, 2-2

SSL, 4-3

configuring, 4-7

definition, 6-4

startup network configuration file, 2-2

Support Centre, 1-4

system requirements

MaiLinX remote printing, 3-11

Usage Analysis Tool, 3-5

T

TCP/IP, 3-7

definition, 6-4

Technical Support, 1-1

TFTP

definition, 6-4

TLS, 4-3

definition, 6-4

troubleshooting

Knowledge Base, 1-1

PhaserSMART Technical Support, 1-1,

1-2

PrintingScout alerts, 1-2

print-quality problems using

CentreWare IS, 1-5

Technical Support, 1-1

U

UDP

definition, 6-4

Usage Analysis Tool, 3-5

definition, 6-4

system requirements, 3-5

usage profile reports, 3-4 sending, 3-4 setting up, 3-4

V

viewing printer usage information, 3-2

VxWorks, C-6

W

Walk-Up installation, 2-3

Walk-Up printing driver, 2-3

definition, 6-4

X

Xerox Support Centre, 1-4

Xerox Usage Analysis Tool, 3-5

definition, 6-4

Index

System Administrator Guide

Index-5

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents