Comprehensive CSW-HD442-4K60 HDMI 2.0 4x4 True Matrix Switcher Splitter Product Manual

Comprehensive CSW-HD442-4K60 HDMI 2.0 4x4 True Matrix Switcher Splitter Product Manual
CSW-HD442-4K60
HDMI 4x4 True
Matrix Switcher
Splitter with Control
Operation Manual
User manual
+
Matrix Page
-
4x4 HDMI Matrix Controller
General
EDID
OUTPUT A
ARC
ID ON ID Off
X
FW Upgrade
OUTPUT B
OUTPUT C
ARC
AR:C
ID ON ID Off
OUTPUT D
ARC ---ID ON ID Off
ID ON ID Off
1. LED which display Input number for respective Output
2. Click to select Input port for respective Output port
3. Click to select previous or next Input port for respective Output
port
4. Click to open or close output ARC fuction
Attention:
ARC fuciton : If you need use ARC,your HDTV must support this
fuction, When you open the ARC fuciton,the COAXIAL of matrix will
output the HDTV current display content audio signal. Otherwise it
will output the selected HDMI source(DVD,set-top-box ,etc) audio
signal.
Page 8 of 10
ca
::::,
C:
ca
E
s..
Cl)
u,
::::,
PC
Router ·�
DVD
DVD
DVD
DVD
e
J
�
ec
s.
�
ec
......
Q
=
0
......
u
Q)
==
0
u
......•
......
......
>
·------------t
Amplifier
2.0 Sound
-==--�
..
I 1 · 1..__
TV
TV
Amplifier
2.0 Sound
TV
Amplifier
TV
Rs232 Cable
Coaxial Cable
Earphone Cable
IR Cable
UTP Cable
HOMI Cable
Amplifier
Earphone
0
.....
0
.....
Q)
C>
ro
Cl.
1.RS-232 Command:
Baudrate:115200
Data width:8bit
Parity: none
Stop: 2bit
Port switch command package length is 13byte:
[0xa5+0x5b+0x02+0x03+input port(1~4)+0x00+output port(1~4)+0x00+0x00+0x00+0x00+0x00+checksum]
All you need to change is just “input port”, ”output port”, ”checksum”
Checksum = 0x100 – (0xa5+0x5b+0x02+0x03+input port+0x00+output port+0x00+0x00+0x00+0x00+0x00)
For example: Set output 1 form input 2 command:
A5 5B 02 03 02 00 01 00 00 00 00 00 F8
Port switch query package length is 13byte:
This is a query command which mean you must send query package and then receive an answer.
For example: Query output A input port (1~4)
Send package:
A5 5B 02 01 01 00 00 00 00 00 00 00 FC
Receive package: A5 5B 02 01 01 00 01 00 00 00 00 00 FB
The red 01 mean the output port number, it should be 1~4.
The blue 01 mean the input port number, it should be 1~4.
ARC on/off command package length is 13byte:
[0xa5+0x5b+0x10+0x01+ARC (0x0f:ON;0xf0:OFF)+0x00+input port(1~4)+0x00+0x00+0x00+0x00+0x00+checksum]
ARC on/off query package is 13byte:
This is a query command which mean you must send query package and then receive an answer.
For example:
Send package:
A5 5B 10 02 00 00 input port(1~4)00 00 00 00 00 checksum
Receive package: A5 5B 10 02 F0 00 input port(1~4) 00 00 00 00 00 checksum
The blue F0 mean ARC off, if 0F mean ARC on.
Edid set command package length is 13byte:
[0xa5+0x5b+0x03+0x02+Edid index(1~15)+0x00+input port(1~4)+0x00+0x00+0x00+0x00+0x00+checksum]
[0xa5+0x5b+0x03+0x01+Edid index(1~15)+0x00+0x00+0x00+0x00+0x00+0x00+0x00+checksum]
Means: set edid mode to all input port
Edid query command package length is 13byte:
This is a query command which mean you must send query package and then receive an answer.
For example: Query input 1 Edid index (1~15)
Send package:
A5 5B 01 0C 01 00 00 00 00 00 00 00 checksum
Receive package: A5 5B 01 0C 01 00 01 00 00 00 00 00 checksum
The red 01 mean the input port number, it should be 1~4.
The blue 01 mean the Edid index number, it should be 1~15.
Edid index list:
1080p,Stereo Audio 2.0
=1
1080p,Dolby/DTS 5.1
=2
1080p,HD Audio 7.1
=3
1080i,Stereo Audio 2.0
=4
1080i,Dolby/DTS 5.1
=5
1080i,HD Audio 7.1
=6
3D,Stereo Audio 2.0
=7
3D,Dolby/DTS 5.1
=8
3D,HD Audio 7.1
=9
4K2K30,Stereo Audio 2.0
= 10
4K2K30,Dolby/DTS 5.1
= 11
4K2K30,HD Audio 7.1
= 12
4K2K60,Stereo Audio 2.0
= 13
4K2K60,Dolby/DTS 5.1
= 14
4K2K60,HD Audio 7.1
= 15
Edid copy command package length is 13byte:
[0xa5+0x5b+0x03+0x04+output port (1~4)+0x00+input port(1~4)+0x00+0x00+0x00+0x00+0x00+checksum]
Means: copy output port X edid to input port X
[0xa5+0x5b+0x03+0x03+output port (1~4)+0x00+0x00+0x00+0x00+0x00+0x00+0x00+checksum]
Means: copy output port X edid to all input port
Output HDP status query package is 13byte:
This is a query command which mean you must send query package and then receive an answer.
For example: Query output 1(1~4) HPD status
Send package:
A5 5B 01 05 01 00 00 00 00 00 00 00 F9
Receive package: A5 5B 01 05 01 00 FF 00 00 00 00 00 FA
The red 01 mean the output port number, it should be 1~4.
The blue FF mean this port’s HPD is LOW, if 00 mean HIGH.
Input port status query package is 13byte:
This is a query command which mean you must send query package and then receive an answer.
For example: Query input 1(1~4) status
Send package:
A5 5B 01 04 01 00 00 00 00 00 00 00 FA
Receive package: A5 5B 01 04 01 00 FF 00 00 00 00 00 FB
The red 01 mean the input port number, it should be 1~4.
The blue FF mean this port is plug out, if 00 mean plug in.
Beep on/off command package length is 13byte:
[0xa5+0x5b+0x06+0x01+Beep onoff(0x0f:ON; 0xf0:OFF)+0x00+0x00+0x00+0x00+0x00+0x00+0x00+checksum]
Beep on/off query package is 13byte:
This is a query command which mean you must send query package and then receive an answer.
For example:
Send package:
A5 5B 01 0B 00 00 00 00 00 00 00 00 F4
Receive package: A5 5B 01 0B 00 00 FF 00 00 00 00 00 F5
The blue FF mean Beep off, if 00 mean Beep on.
80 Little Falls Road, Fairfield, NJ 07004
Phone: 800.526.0242 l Fax: 201.814.0510
www.ComprehensiveCo.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement