Steren WR-058 Sistema de 2 micrófonos inalambricos VHF, de solapa y diadema Owner's Manual
Steren WR-058 is a wireless microphone system that includes two headset microphones, two lavalier microphones, two VHF transmitters, a VHF receiver, an AC/DC converter, and an audio cable. It is designed for use in a variety of applications, including live performances, presentations, and conferences.
The system is easy to set up and use. Simply connect the microphones to the transmitters, the transmitters to the receiver, and the receiver to your sound system. You can then adjust the volume of each microphone and monitor the signal strength on the receiver's LED indicators.
The Steren WR-058 is a versatile and reliable wireless microphone system that is perfect for a wide range of applications.
Advertisement
Advertisement
0919g V0.6
IMPORTANTE
Lea cuidadosamente este instructivo para evitar cualquier mal funcionamiento.
La información que se muestra en este manual sirve únicamente como referencia sobre el producto. Debido a actualizaciones pueden existir diferencias.
Por favor, consulte nuestra página web (www.steren.com) para obtener la versión más reciente del instructivo.
PRECAUCIONES
• No use ni almacene este equipo en lugares donde existan goteras o salpicaduras de agua.
• No golpee ni deje caer los micrófonos.
• Siempre utilice un paño suave, limpio y seco para limpiar el equipo.
• No use los micrófonos en condiciones de polvo o humedad, calor excesivo, cerca de fuentes de calor o vibraciones mecánicas.
• Este aparato no se destina para utilizarse por personas (incluyendo niños), cuyas capacidades físicas, sensoriales o mentales sean diferentes o estén reducidas, o carezcan de experiencia o conocimiento.
• Los niños deben supervisarse para asegurar que no empleen el aparato como juguete.
CONTENIDO
1. 2 micrófonos de diadema VHF
2. 2 micrófonos de solapa VHF
3. 2 transmisores VHF
4. Receptor VHF
5. Convertidor CA/CC
6. Cable de audio
3
2
4
1
5
RECEIVER
POWER ANTENNA
TRANSMITTER
AUDIO
ON A B PEAK
VOLUME
6
CONTROLES
Panel frontal
4
2
1
3
POWER
CH A RF
VOLUME
AF RF
AF
5 7
1. Interruptor de encendido
2. LED indicador de encendido
3. Control de volumen canal 1
4. LED indicador de micrófono encendido canal 1
5. LED indicador de picos canal 1
6. Control de volumen canal 2
7. LED indicador de micrófono encendido canal 2
8. LED indicador de picos canal 2
CH B
VOLUME
8
6
3.2 Panel trasero
9. Salida Aux.
10. Entrada de corriente
11. Antena A
12. Antena B
OPERACIÓN
1.
Abra el compartimento de baterías de los transmisores y coloque 2 pila s AA
2. Conecte un micrófono (solapa o diadema) al transmisor y asegúrelo girando el conector.
3. Conecte el adaptador de corriente al receptor (entrada DC IN) y luego a un tomacorriente.
AUX
UTPUT
DC IN
400mA
ANT -B
AUX
OUTPUT
12-15 VDC
400mA
FREQUENCY:
254.60MHz
A:
B: 227.70MHz
ANT -A
4. Conecte el receptor a un sistema de sonido, mezcladora o a mplificador a través de la salida de audio (AUX OUTPUT).
AC 12V R L R L R L
1 2
GND
5. Extienda las antenas del receptor y colóquelas en una posición en la que reciban la señal de los micrófonos de forma adecuada.
POWER
CH A RF
VOLUME
AF RF AF
CH B
VOLUME
6. Encienda el receptor y los transmisores, los LEDs indicadores se encenderán en el receptor.
POWER
CH A RF
VOLU
7. Ajuste el volumen de los micrófonos en el receptor.
VOLUM en el nivel mínimo. Los sonidos fuertes pueden causar daños en los micrófonos o el oído.
8. Ajuste el nivel de ganancia en el transmisor; incremente o disminuya el nivel de ganancia hasta que la señal de audio sea su cientemente fuerte y no se distorsione.
9. Comience a usar el micrófono, hable o cante, no golpee ni sople en ellos.
El LED indicador se encenderá cuando la batería del transmisor esté baja.
PROBLEMAS Y SOLUCIONES
P r o b l e m a
Retroalimentación.
Esto ocurre cuando el sonido ampli cado de cualquier bocina entra de nuevo al sistema de sonido a través de cualquier micrófono abierto.
S o l u c i ó n
Para evitar esto, siga las siguientes recomendaciones:
- Haga que el orador hable más fuerte hacia el micrófono.
- Reduzca la distancia entre el usuario y el micrófono.
- Reduzca el número de micrófonos abiertos.
- Aleje la bocina del micrófono y acérquela al oyente.
- Ajuste los controles de tonos.
ESPECIFICACIONES
Micrófono
Alimentación (micrófono de diadema): 3 V- - - ( 2 x AA )
Rango en frecuencia:
Estabilidad:
Poder de transmisión:
Máximo nivel de entrada:
Temperatura de operación:
220 – 2
50 PPM (-10
10 dBm
0 dBV
-10 °C a
7 0 MHz
°
50 °C
C a 50 °C)
Receptor
Alimentación:
Rango en frecuencia:
Sensibilidad:
Respuesta en frecuencia:
Rango dinámico:
12 V - - -
220 –
>90 dB
2 7
- 94 dBm
4 00 mA
0 MHz
Convertidor CA/CC
Alimentación:
Salida:
100~240 V~ 60 Hz
1 2 V - - - 4 00 mA
8 W
El diseño del producto y las espe cificaciones pueden cambiar sin previo aviso.
PÓLIZA DE GARANTÍA
Esta póliza garantiza el producto por el término de un año en todos sus componentes y mano de obra, contra cualquier defecto de fabricación y funcionamiento, a partir de la fecha de entrega.
CONDICIONES
1.- Para hacer efectiva la garantía, presente esta póliza, o factura, o comprobante de compra y el producto, en
donde fue adquirido o en Electrónica Steren S.A. de C.V.
2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor.
3.- El tiempo de reparación en ningún caso será mayor a 30 días, contados a partir de la recepción del producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta garantía es en cualquiera de las direcciones mencionadas posteriormente.
ESTA PÓLIZA NO SE HARÁ EFECTIVA EN LOS SIGUIENTES CASOS:
1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales.
2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.
3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrónica Steren S.A. de C.V. El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casa comercial donde adquirió el producto. Si la presente garantía se extraviara, el consumidor puede recurrir a su proveedor para que le expida otra póliza, previa presentación de la nota de compra o factura respectiva.
DATOS DEL DISTRIBUIDOR
Nombre del Distribuidor __________________________________
Domicilio ______________________________________________
Número de serie ________________________________________
Fecha de entrega _____________________________________
ELECTRÓNICA STEREN S.A. DE C.V.
Biólogo Maximino Martínez No. 3408, San Salvador Xochimanca, Del. Azcapotzalco Ciudad de México 02870, RFC: EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Autopista México-Querétaro. Km 26.5 Sin número, Nave Industrial 3-A, Col. Lomas de Boulevares, Tlalnepantla de Baz, Estado de
México, C.P. 54020, RFC: SPE-941215-H43
En caso de que su producto presente alguna falla, acuda al centro de distribución más cercano a su domicilio y en caso de tener alguna duda o pregunta por favor llame a nuestro Centro de Atención a Clientes, en donde con gusto le atenderemos en todo lo relacionado con su producto Steren.
Centro de Atención a Clientes
01 800 500 9000
0 6 1 9g V0.
5
IMPORTANT
Read these manual to avoid any damage.
The instructions of these manual are for reference about the product.
There may be differences due to update.
Please check our web site instruction manual.
(www.steren.com) to obtain the latest version of the
CAUTIONS
• Do not use or store the equipment near wet places.
• Do not bump or drop the microphones.
• Clean only with a soft, dry cloth.
• Do not use the microphone if it is exposed to direct sunlight, extreme heat, dust or moisture.
• This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities are different or reduced, or lack experience or knowledge.
• Children should be supervised to ensure that they do not use the appliance as a toy.
CONTENT
1. Two hedset VHF microphone
2. Two tie VHF microphone
3. Two VHF Transmitters
4. VHF receiver
5. AC/DC power converter
6. Audio cable
3
2
4
1
5
RECEIVER
POWER ANTENNA
TRANSMITTER
AUDIO
ON A B PEAK
VOLUME
6
CONTROLS
Front panel
4
2
1
3
POWER
CH A
RF
VOLUME
AF RF
AF
5 7
1.- On / Off
2.- Power LED indicator
3. Volume control channel 1
4.- Microphone on LED indicator channel 1
5.- Peak LED indicator channel 1
6. Volume control channel 2
7.- Microphone on LED indicator channel 2
8.- Peak LED indicator channel 2
CH B
VOLUME
8
6
Rear panel
9.- Aux output
10.- AC IN
11.- Antenna A
12.-. Antenna B
OPERATION
1. Open the battery compartment of the transmitters and insert 2 x AA batteries
2. Connect a microphone (lapel or headset) to the transmitter and secure it by turning the connector.
3. Connect the power adapter to the receiver (DC IN) and then to a power outlet.
AUX
UTPUT
12-15 VDC
400mA
4.
Connect the receiver to a sound system, mixer or ampl ifier through the audio output (AUX OUTPUT).
ANT -B DC IN
12-15 VDC
400mA
FREQUENCY:
A: 254.60MHz
227.70MHz
B:
ANT -A
AC 12V R L R L R L
1 2
GND
5. Extend the receiver’s antennas and place it in a position where they can receive the signal from the microphones.
6. Turn on the receiver and the transmitters; the LEDs will light up on the receiver.
POWER
CH A RF
VOLUME
AF RF AF
CH B
VOLUME
POWER
CH A RF
VOLU
7. Adjust the microphone’s volume on the receiver.
VOLUM
Before turning on the device, make sure the microphone volume is at the minimum level. Loud sounds can cause damages in the microphones or ears.
8. Adjust the gain level on the transmitter; increase or decrease the gain level until the audio signal is strong enough and it is not distorted.
9. Talk or sing into the microphones, do not knock or blow on them.
The LED indicator will light when the transmitter’s battery is low.
TROUBLESHOOTING
Trouble
Feedback.
This occurs when the ampli ed sound from any speaker comes back to the sound system through any open mic.
Solution
To prevent this, follow the next recommendations:
- Have the speaker to speak stronger towards the microphone.
- Reduce the distance between you and the microphone.
- Reduce the number of open microphones.
- Move the speaker away from the microphone and bring it closer to the listener.
-Adjust the tone controls.
SPECIFICATIONS
Microphone
Input (headset microphone):
Frequency range:
Stability:
Transmission power:
Maximum input level:
Operational temperature:
Receiver
Input:
Frequency range:
Sensitivity:
Frequency response:
Dynamic range:
AC/DC power converter
Input:
Output:
3 V- - - (2 x AA)
220 – 270 MHz
50 PPM (-10° to 50 °C)
10 dBm
0 dBV
-10 °C to 50 °C
12 V - - - 400 mA
220 – 270 MHz
-94 dBm
60 Hz ~ 18 kHz +/- 3 dB
>90 dB
100~240 V~ 60 Hz 8 W
1 2 V - - - 4 00 mA
Product design and spec ific ations are subject to change, without notice.
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year on the other parts from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge. The supplier will pay for transportation charges.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Serial number ________________________________________
Product ______________________________________________
ELECTRÓNICA STEREN S.A. DE C.V.
Biólogo Maximino Martínez No. 3408, San Salvador Xochimanca, Del. Azcapotzalco Ciudad de
México 02870, RFC: EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Autopista México-Querétaro. Km 26.5 Sin número, Nave Industrial 3-A, Col. Lomas de Boulevares,
Tlalnepantla de Baz, Estado de México, C.P. 54020, RFC: SPE-941215-H43
In case your product fails or have questions, please contact your nearest dealer.
If you are in Mexico, please call to our Call Center.
01 800 500 9000

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Two headset microphones and two lavalier microphones for flexible use
- VHF technology for clear and stable sound transmission
- Easy to set up and use
- Adjustable volume for each microphone
- LED indicators for monitoring signal strength