Steren STV-125 Soporte para pantallas de 37" a 90", Owner's Manual
Steren STV-125 is a mobile TV stand that enables you to optimize space and enjoy your favorite shows with comfort. It supports screens ranging from 37 to 90 inches and features a flexible arm that lets you position the screen closer to your seating area. With a maximum load capacity of 70 kg, it ensures stability and safety. The stand is compatible with the VESA standard (800 x 400 mm), making it suitable for most brands like Sharp, Samsung, LG, and Sony. Installation is straightforward with the included screws and fittings, allowing you to set it up on concrete or wooden walls.
Advertisement
Advertisement
STV -125
Soporte móvil para pantallas
LED de 37” a 90”
VIDEO
V0.0
Manual de instrucciones 0915v
1
Soporte móvil para pantallas LED de
37” a 90”
STV-125
Gracias por la compra de este producto Steren.
Este manual contiene todas las indicaciones necesarias para manejar su nuevo Soporte móvil para pantallas LED de
37” a 90”.
Por favor, revíselo completamente para estar seguro de cómo utilizar apropiadamente el producto.
Para apoyo, compras y todo lo nuevo que tiene Steren, visite nuestro sitio web: www.steren.com
La información que se muestra en este manual sirve
únicamente como referencia sobre el producto.
Debido a actualizaciones pueden existir diferencias.
Por favor, consulte nuestra página web (www.steren.
com) para obtener la versión más reciente del instructivo.
2
Características
Optimiza el espacio en tu lugar de entretenimiento con este soporte para pantallas de hasta 90”. Gracias su práctico diseño podrás ajustar la inclinación y, con el brazo fl exible, separar la pantalla de la pared para tenerla más cerca del sillón y así disfrutar tus programas favoritos con toda comodidad.
Está fabricado en acero al bajo carbón que le brinda resistencia y cumple con el estándar VESA (800 x 400 mm), por lo que es compatible con la mayoría de las marcas de pantallas, como Sharp, Samsung, LG, Sony,
Panasonic, etc.
Incluye todos los tornillos y herrajes necesarios para armarlo y fi jarlo en la pared.
Carga máxima: 70 Kg
Ajuste de inclinación
Compatible con estándar VESA: 800 x 400 mm
Fabricado en acero al bajo carbón
Importante
• Elija una pared sólida y lisa para poder fi jar con seguridad el soporte.
• Asegúrese de que la superfi cie de fi jación sostenga de manera segura el peso total del equipo y todos sus componentes.
• Deje al menos 15 cm libres alrededor del espacio para instalar el soporte y quite cualquier objeto que haya en el lugar.
• Durante la instalación, utilice sólo las piezas suministradas y fíjelas fi rmemente.
•No apriete excesivamente los tornillos.
• No exceda la capacidad de carga máxima de 70 Kg.
• Este producto está diseñado para uso en interiores. Utilizarlo en exteriores podría ocasionar fallas y heridas personales.
3
Contenido
CANTIDAD
1
PIEZA
Soporte
2
1
Barras de sujeción
Plantilla
2
1
1
Tornillos para seguro de barra (D)
Llave (E)
Nivel de gota (F)
CANTIDAD
6
6
6
KIT DE TORNILLOS (W)
PIEZA
Tornillos W-A
Taquetes W-B
Arandelas W-C
4
CANTIDAD
4
4
4
4
4
4
8
4
KIT DE TORNILLOS (M)
PIEZA
Tornillos M-A
Tornillos M-B
Tornillos M-C
Tornillos M-D
Tornillos M-E
Rondana rectangular M-F
Arandelas M-G
Arandelas M-H
Herramientas necesarias para la instalación
*
No incluido
Nota: Steren no se hace responsable por daños materiales ni personales causados por mal uso o mala instalación. Es responsabilidad del usuario asegurarse de la correcta instalación y uso del producto, así como de su periódica revisión.
5
Instalación del soporte
1. Utilice la plantilla y el nivel de gota para realizar las marcas de las perforaciones sobre la superfi cie que desea instalar el soporte.
Al realizar las perforaciones, tenga cuidado de que no existan tuberías ocultas con cableado eléctrico, gas o agua.
6
3
4
a) Sobre concreto
1
2
7
b) Sobre madera
1
Recuerde que la madera debe estar en óptimas condiciones. No coloque el soporte sobre madera comprimida o húmeda.
2
3
4
8
Instalación de la pantalla
1. Coloque las barras de sujeción en la parte posterior de la pantalla y elija 4 tornillos y arandelas para fi jarlas.
a
Nota: Los tornillos suministrados son de medidas estándar. Le recomendamos consultar el manual de instrucciones de su pantalla para obtener información acerca de los tornillos necesarios para montarla en un soporte. b
9
2. Instale la pantalla sobre el soporte.
1
2
3
10
3. Conecte el cable coaxial.
4. Afl oje los seguros de inclinación.
11
5. Ajuste el ángulo de visión y apriete los seguros.
12
Producto: Soporte móvil para pantallas LED de 37” a 90”
Modelo: STV-125
Marca: Steren
Esta póliza garantiza el producto por el término de un año en todas sus partes, mano de obra, contra cualquier defecto de fabricación y funcionamiento a partir de la fecha de entrega.
CONDICIONES
1.- Para hacer efectiva la garantía, presente esta póliza y el producto, en donde fue adquirido o en Electrónica Steren S.A. de C.V.
2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos por el proveedor.
3.- El tiempo de reparación en ningún caso será mayor a 30 días, contados a partir de la recepción del producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como hacer válida esta garantía es en cualquiera de las direcciones mencionadas posteriormente.
1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales.
2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.
3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrónica Steren S.A. de C.V.
El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casa comercial donde adquirió el producto. Si la presente garantía se extraviara, el consumidor puede recurrir a su proveedor para que le expida otra póliza, previa presentación de la nota de compra o factura respectiva.
DATOS DEL DISTRIBUIDOR
Nombre del Distribuidor __________________________
Domicilio ______________________________________
Producto ______________________________________
Marca ________________________________________
Modelo _______________________________________
Número de serie ________________________________
Fecha de entrega ________________________________
En caso de que su producto presente alguna falla, acuda al
Centro de Atención a Clientes
01 800 500 9000 centro de distribución más cercano a su domicilio y en caso de tener alguna duda o pregunta por favor llame a nuestro Centro de Atención a Clientes, en donde con gusto le atenderemos en todo lo relacionado con su producto Steren.
ELECTRÓNICA STEREN S.A. DE C.V.
Camarones 112, Obrero Popular, 02840,
Del. Azcapotzalco, México, D.F. RFC: EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Biólogo Maximino Martínez No. 3408 Int. 2, 3 y 4, San Salvador Xochimanca, Del. Azcapotzalco,
México, D.F. 02870, RFC: SPE941215H43
ELECTRÓNICA STEREN DEL CENTRO, S.A. DE C.V.
Rep. del Salvador 20 A y B, Centro, 06000,
Del. Cuauhtémoc, México. D.F. RFC: ESC9610259N4
ELECTRÓNICA STEREN DE GUADALAJARA, S.A.
López Cotilla No. 51, Centro, 44100, Guadalajara, Jal. RFC: ES-
G810511HT6
ELECTRÓNICA STEREN DE MONTERREY, S.A.
Colón 130 Pte., Centro, 64000, Monterrey, N.L. RFC: ESM830202MF8
ELECTRÓNICA STEREN DE TIJUANA, S.A. de C.V.
Calle 2a, Juárez 7636, Centro, 22000, Tijuana, B.C.N. RFC: EST-
980909NU5
13
37-90” TV stand
STV -125
VIDEO
V0.0
Instruction manual 0915v
14
37-90” TV stand
STV-125
Thank You on purchasing your new Steren product.
This manual includes all the feature operations and troubleshooting necessary to install and operate your new
Steren´s 37-90” TV stand.
Please review this manual thoroughly to ensure proper installation and operation of this product. For support, shopping, and everything new at Steren, visit our website: www.steren.com
La información que se muestra en este manual sirve
únicamente como referencia sobre el producto.
Debido a actualizaciones pueden existir diferencias.
Por favor, consulte nuestra página web (www.steren.
com) para obtener la versión más reciente del instructivo.
15
Highlights
Optimize your space in your entertainment space with this TV stand.
You can adjust tilt easily, and the fl exible arm allows you to separate the screen from the wall and reach to your couch and enjoy your favorite TV shows.
Manufactured in low carbon steel and complies with VESA standard (800 x 400 mm), being compatible with most popular brands such as Sharp,
Samsung, LG, Sony, Panasonic, among others.
The package includes all required fi ttings for installation.
Maximum load: 70 kg
Tilt easy adjust
VESA compatible: 800 x 400mm
Manufactured in low carbón steel
Important
• Choose a solid and smooth wall to fi x the stand securely.
• Be sure that the selected surface supports the total weight of the stand and their components.
• There must be 15cm free around of the area to install the stand and remove any object around.
• During the installation, use only the supplied pieces and fi x them fi rmly.
• Don’t tighten the screws excessively.
• Don’t exceed the maximum charge capacity (70 Kg).
• This product is designed for indoor use. Using outdoors may cause damages and personal injuries.
16
Content
QUANTITY
1
PIECE
Stand
2
1
Fastening bars
Template
2
1
1
Security screws bar (D)
Wrench (E)
Level (F)
QUANTITY
6
6
6
SCREW KIT (W)
PIECE
W-A screws
W-B anchors
W-C washers
17
QUANTITY
4
4
4
4
4
4
8
4
SCREW KIT (M)
PIECE
M-A screws
M-B screws
M-C screws
M-D screws
M-E screws
M-F regular washer
M-G washers
M-H washers
Tools you may need
*
Not included
Note: Steren it is not responsible by materials or personal damage caused by improper use or improper installation. Is responsibility of the user to be sure of the correct installation and the use of the product, as well as of their constant revision.
18
Stand installation
1. Use the template and the level to make the drilling marks over the surface that where you want to install the stand.
Before drill, make sure that electrical wire pipes, gas or water exists.
19
3
4
a) Installation in concrete
1
2
20
b) Installation in wood
Remember: the wood must be in optimal conditions. Don’t place the support over compressed or wet wood.
1 2
3
4
21
Screen installation
1. Place the fastening bars into the rear of the screen and choose
4 screws and washers to fi x them.
a
Note: The supplied screws are standard size.
Please refers to the instruction manual of your screen to obtain more info about of the screws to mount in the support.
b
22
2. Install the screen onto the support.
1
2
3
23
3. Connect the coaxial cable.
4. Loosen the inclination secures.
24
5. Set the angle of vision and tighten the secures.
25
Product: 37-90” TV stand
Part number: STV-125
Brand: Steren
WARRANTY workmanship and materials to the original purchaser for one year from the date of purchase.
CONDITIONS package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
er, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
establishment.
purchase ticket.
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000
26
www.steren.com
Este instructivo puede mejorar con su ayuda, llámenos al:
Help us to improve this instruction manual, call us to:
01 800 500 9000
Centro de servicio a clientes
Customer Service Center
27

Public link updated
The public link to your chat has been updated.
Advertisement