Cambridge SoundWorks OontZ Angle 3 Owner Manual
Advertisement
Advertisement
Quick Start Guide
Portable Bluetooth Speaker
Designed and Engineered By
TheOontZ.com
Table of Contents
In the Package
Buttons
Lights
Connectors
Play Horizontally or Vertically
Battery Features
Charging the Battery
Turning On and Off
Pair & Connect - Step 1
Pair & Connect - Step 2 --
-- From Your iPhone, iPad, Smartphone, Tablet and Mobile Devices
-- From Your Apple Mac or Windows Laptop/Computer
-- From Your Amazon Echo Device
To Play with Non-Bluetooth Audio Source Devices Use the 3.5mm Audio Cable
IPX5 Water Resistance
Wireless Hands Free Personal Speakerphone
Troubleshooting & Customer Support
Resetting Your OontZ Angle 3
Safety and Precautions
Pages
3
4
1
2
5
6
7 - 8
9
10
11
11
12 - 13
14
15
16
17
18
19 - 20
In the Package
Speaker
Quick-Start Guide
Micro USB Charging Cable
Note: The Micro USB Charging Cable is packed below the cardboard insert in the box. Slide out the insert to locate the cable.
Page 1
Buttons
Bluetooth/Speakerphone Button Power Button
Button (Dual Function)
Volume Down
- Press and Release to decrease volume one level; repeat until volume lowers to desired level
- Holding the button down will result in track back
Track Back
- Press and Hold Down for 2 Seconds
Play/Pause Button
Press and Release to Pause/Play
Button (Dual Function)
Volume Up
- Press and Release to increase volume one level; repeat until volume raises to desired level
- Holding the button down will result in track advance
Track Advance
- Press and Hold Down for 2 Seconds
Important - Make sure the volume level is set high on your audio source device. The volume on the OontZ Angle 3 and your audio source device both need to be set to the highest level for the loudest volume. The volume controls on your audio source device and the speaker work independently of each other.
Important - The track back feature is application-dependent. Some apps may not support track back, track forward, or play/pause
Page 2
Lights
Blue Light lit when speaker is on:
- Flashing Blue speaker is in pairing mode
- Solid Blue
speaker is connected
- Blue Light will turn to
Solid Blue
when the 3.5mm audio cable is plugged into the
AUX IN Jack
Red Light lit when charging:
- Slowly flashing Red
battery is charging
- Solid Red
battery is fully charged
Page 3
Connectors
Rubber Flap
- covers connectors
- pull gently from the bottom to access connectors, it is a snug fit to provide water resistance
Built-in Mic for
Speakerphone
AUX IN Jack
Micro USB
Charging Connector
Note: The rubber flap needs to be closed to keep the speaker water resistant
Page 4
Play Horizontally or Vertically
Play Horizontally
Controls on side
Play Vertically
Controls on top
Dual Precision Stereo Drivers
Passive Bass Radiator
– Has its own grille
– Faces bass away from Dual
Precision Stereo Drivers
– Rich bass does not interfere with Mids and Highs
Page 5
Battery Features
- The rechargeable battery comes with a partial charge and the speaker is ready to play.
- For maximum playtime, fully charge the battery.
- You can play while charging.
Low Charge Remaining
- When the battery charge has less than 15% remaining the Red Light will begin flashing rapidly.
- The volume will decrease to preserve the remaining battery charge.
Music Play Time
Up to 12 hours on a full charge, at 2/3 volume.
Louder volumes will reduce the battery play time.
Power Saving Feature
- When playing from battery power the OontZ Angle 3 will turn off after
15 minutes of not playing audio to conserve the battery charge. *
- When plugged into a charging source the OontZ Angle 3 will remain on until you turn the power off.
- You can continue to keep the speaker plugged into a charging source even when it is fully charged.
*Exception: when connected to certain devices, including the Amazon
Echo Dot or Amazon Echo, the Power Saving Feature is disabled and the speaker will remain on until you turn the power off.
Page 6
Charging the Battery
Red Light lit when charging:
- Slowly flashing Red
battery is charging
- Solid Red
battery is fully charged
- Insert the small end of the Micro
USB Charging Cable into the Micro
USB Charging Connector as shown.
- Insert the larger end of the Micro
USB Charging cable into a USB wall charger for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the battery (see illustrations on page 8).
Charging Time:
- Up to 6 hours to fully charge a low battery.
Page 7
Charging the Battery (continued)
Insert the larger end of the Micro USB charging cable into a USB wall charger for a Smartphone or iPhone (USB wall charger* that is 5V 1.0A up to 5V 2.4A maximum), or a USB port on your laptop/computer to charge the OontZ Angle 3 battery.
* Only use a USB wall charger that is UL listed and on the USB wall charger the logo will be printed.
Page 8
Turning On and Off
Turn ON
Press and Release the Power Button
Red Light turns on
- will turn off after 3 seconds if playing from battery power
Blue Light turns on
- Flashing Blue
The speaker is turned on and is in pairing mode
- Solid Blue
The speaker is turned on and has connected to an audio source device and is ready to play
Turn OFF
Press and Hold Down the Power Button for 2 Seconds
Blue Light will turn off
Page 9
Pair & Connect -- Step 1
- Make sure your OontZ Angle 3 battery has a sufficient charge, it is not able to connect when the charge is too low.
- Your device needs to be within 100 unobstructed feet of the OontZ Angle 3 to pair and connect. If there is an issue when connecting please move your device closer to the speaker, then pair and connect.
Turn ON your OontZ Angle 3
Flashing Blue Light
- The OontZ Angle 3 is ready to pair and connect.
Solid Blue Light
- The OontZ Angle 3 has automatically reconnected to the last device it was connected to and is ready to play.
- The OontZ Angle 3 will automatically try to connect to the last device it was connected to each time it is turned on and that device is within range.*
The OontZ Angle 3 can be connected to one device at a time.
- To pair and connect to a different device, you need to first disconnect the currently paired device.
- To disconnect the current device, press and hold down the Bluetooth button for 3 seconds.
- The Blue Light will begin flashing and the OontZ Angle 3 is ready to pair and connect to your device.
*Exception: certain devices may not automatically reconnect.
Amazon Echo devices will not automatically reconnect. You will need to say "Alexa, connect my speaker"
Page 10
Pair & Connect -- Step 2 --
-- From Your iPhone, iPad, or iPod
- Go to Settings > Bluetooth, check Bluetooth is on
- Select 'OontZ Angle 3 xxx' when it appears under DEVICES
(xxx: 3 characters which are unique to your speaker)
- The speaker will connect in a few seconds
- The Blue Light will turn solid blue and there will be a quiet chime
- You can now play your audio wirelessly to your
OontZ Angle 3
-- From Your Smartphone, Tablet & Mobile Devices
- Go to Settings > Bluetooth, check Bluetooth is on
- Scan or Search and select 'OontZ Angle 3 xxx' when it appears under AVAILABLE DEVICES (xxx: 3 characters which are unique to your speaker)
- The speaker will connect in a few seconds
- The Blue Light will turn solid blue and there will be a quiet chime
- You can now play your audio wirelessly to your OontZ Angle 3
Note: Your Smartphone or Tablet instructions may vary
Important: Make sure the volume level is set high on your device. The volume on the OontZ Angle 3 and your device both need to be set to the highest level for the loudest volume. The volume controls on your device and the speaker work independently of each other.
-- From Your Apple Mac or Windows Laptop/Computer
For the pairing and connecting guide for your Apple Mac or Windows laptop/computer, please visit: TheOontZ.com/pairing
Page 11
Pair & Connect -- Step 2 --
-- From Your Amazon Echo device
To pair and connect the first time from the Amazon Echo device use the Alexa app on your device.
- Open the Alexa app
- Press 'Devices' by pressing the 'Devices' button in the bottom right corner
- Press 'Echo & Alexa'
- Select your Amazon Echo device under list of devices displayed by pressing it
- Press 'Bluetooth Devices'
- Press 'Pair A New Device'
- Select the 'OontZ_Angle 3 xxx' (xxx: 3 characters unique to your speaker) when it appears
- The OontZ Angle 3 will make a 'ding' sound when connected
To connect the next time, turn on the OontZ Angle 3 and say "Alexa, connect my speaker" or "Alexa, pair"
Page 12
Pair & Connect -- Step 2 --
-- From Your Amazon Echo device (continued)
Important Note: When the OontZ Angle 3 is playing from battery power and connected to the Amazon Echo device, the speaker will remain on and it will not automatically turn off after 15 minutes of not playing audio.
This will use up the battery charge.
We recommend to:
1) Keep the OontZ Angle 3 plugged into a USB wall charger.
It can remain on and available to play from the Amazon Echo device.
- Or -
2) Turn off the OontZ Angle 3 when you are done listening.
- Either turn off the speaker by pressing and holding down the power button for 2 seconds,
- or say "Alexa, disconnect my speaker" and the OontZ Angle 3 will automatically turn off after 15 minutes.
- When you want to connect and play to the speaker again turn on the OontZ Angle 3 and say "Alexa, connect my speaker" or "Alexa, pair".
For assistance with the Alexa app, contact Amazon's Customer Service.
Open the Alexa app and select Help & Feedback > Email Customer Service
Page 13
To Play with Non-Bluetooth Audio Source Devices
Use a 3.5mm Audio Cable
- Make sure your OontZ Angle 3 battery has a sufficient charge
Turn ON your OontZ Angle 3
- Plug one end of a 3.5mm audio cable into the AUX IN Jack on the back of your speaker.
- Plug the other end of the 3.5mm audio cable into the headphone jack on your laptop/computer or non-Bluetooth audio device.
- Make sure both ends of the cable are fully inserted
- You are now ready to play.
Important: The Bluetooth on the OontZ Angle 3 is disabled when a 3.5mm audio cable is connected to the speaker.
You need to remove the 3.5mm audio cable from the speaker in order to connect to a Bluetooth device.
- Note: When the rubber flap is open to allow a 3.5mm audio cable to be connected, the speaker is not water resistant.
The rubber flap needs to be closed to keep the speaker water resistant.
- Note: The volume control on your device and the speaker work independently of each other. To play the speaker at the loudest
volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.
Page 14
IPX5 Water Resistance
No more worries about the rain or getting splashed
Listen to music in the shower
Perfect for taking to the beach or by the pool
The rubber flap needs to be closed to keep the speaker water resistant and dustproof
Gentle Water Spray or
Splash is okay
DO NOT allow speaker to sit in water
DO NOT allow speaker to submerge fully or partially in water
Safety Precaution: When the OontZ Angle 3 speaker is plugged in to a charging source with the Micro USB charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.
IPX5 rating - The OontZ Angle 3 can resist gentle water spray & splash but cannot be partially or fully submerged or left in a wet environment for an extended period of time, any of which could cause unrepairable damage to the speaker.
When charging or using a 3.5mm audio cable, please keep the speaker away from water as it can be damaged by water entering the connectors.
Page 15
Wireless Hands Free Personal Speakerphone
- The Wireless Hands Free Personal Speakerphone feature works over
Bluetooth with Smartphones and iPhones only
- This feature is not supported when connected to PCs, laptops, Apple Mac or other types of devices.
To answer an Incoming Call / To End a Call
- Press and Release the Bluetooth Button
To Reject an Incoming Call
- Press and Hold Down the Bluetooth Button for 3 Seconds.
- Please keep the speaker close in front of you so you may be heard clearly by the listener.
- You can use your Smartphone or iPhone to switch between using
Hands Free Speakerphone and your phone.
Page 16
Troubleshooting
For issues with your OontZ Angle 3, please view our troubleshooting tips at:
TheOontZ.com/troubleshooting and select the OontZ Angle 3
Customer Support
If you have any issues with your OontZ Angle 3, our Customer Support Team wants to assist you.
Please contact us at:
TheOontZ.com/support
and fill in our customer support form.
Page 17
Resetting Your OontZ Angle 3
Step 1: Remove the Micro USB charging cable and 3.5mm Audio cable, if connected.
Step 2: Press and hold down the Power button and button together for 1 second, then release.
Step 3: The speaker has now been reset and you can turn it on.
Page 18
2.
3.
4.
5.
6.
7.
8.
9.
Safety and Precautions
1.
10.
11.
12.
When the OontZ Angle 3 speaker is plugged in to a charging source with the Micro USB charging cable, never use the speaker in the shower, bath, or near water, to prevent risk of electric shock.
Read and follow all instructions – All operating and use instructions should be followed.
Protect the Micro USB charging cable from being pinched, particularly at the connectors.
Unplug the Micro USB charging cable during lightning storms or when unused for long periods of time.
Do not place speaker near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way.
Do not make alterations to this speaker.
The battery in the speaker is not replaceable. Do not attempt to change it.
Use this speaker only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA,
VDE, CCC) in accordance with the manufacturer’s specifications.
Do not place near naked flame sources, such as lighted candles, on or near the speaker.
Do not expose this speaker to excessive heat
(e.g. from storage in direct sunlight, fire or the like)
If the battery leaks, do not allow the liquid to come in contact with the skin or eyes.
If contact is made, seek medical advice.
Page 19
Safety and Precautions (continued)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Apple, iPhone, iPad, iPod, and Mac are registered trademarks of Apple Inc.
Amazon, Alexa, Amazon Echo and Amazon Echo Dot are registered trademarks of Amazon.com, Inc.
Windows is a registered trademark of Microsoft Corporation
Bluetooth is a registered trademark of Bluetooth SIG, Inc
UL is a registered trademark of UL.
Page 20
OontZ Angle 3 Carry Case
Sold separately
• Lightweight neoprene rubber with reinforced zipper
• Includes a durable aluminum carabiner for easily attaching to backpacks, luggage, laptop bags, coolers, camera bags, purses, belts, and other clippable items
OontZ Bluetooth Speaker
Official Mounting Strap
Sold separately
• Securely strap your OontZ speaker quickly to take with you
• Perfect for strapping an OontZ Portable
Bluetooth Speaker to bicycles, scooters, golf carts, boats, and other mountable object
• Made of stretchable durable rubberized material for a secure fit
OontZ Angle 3 BudZ
Sold separately
• Superior Sound and Deep Bass
• Waterproof and Sweatproof
• Ultra-Comfortable and Secure Fit
• Noise Cancellation of Background
Noise
• Listen All Day with Playtime up to 8 hours
Available at TheOontZ.com

Public link updated
The public link to your chat has been updated.
Advertisement