BD10 Power Feed Trim Saw

PARTS LIST

Revision 115 04.2019

Manual Part # 169351

Caution: Read all safety and operating instructions before using this equipment.

This manual MUST accompany the equipment at all times.

Barranca Diamond Products, Inc.

1315 Storm Parkway

Torrance, CA 90501

Toll-Free: (800) 630-7682

Phone: (310) 523-5867

Fax: (310) 257-3063 www.barrancadiamond.com

BD10

BD-10 P/N 168787

EXPLODED VIEW

25

BD10

BD-10 P/N 168787

29

30

31

32

24

25

26

27

28

20

21

22

23

17

18

19

37

38

39

33

34

35

36

13

14

15

16

9

10

11

12

6

7

4

5

8

Item

1

2

3

PARTS LIST

Part Description

Nut, Hex, 5/16 - 18

Pulley, 2" x 5/8" bore

Wrench, Tile Saw Nut 15/16

Flange, Outer, 2 - 3/8

Bearing, Ball, 17 x 40 x 12mm

Screw, Soc HD Cap, 1/4 - 20 x 1

Screw, Pan HD #10 - 32 x 1/2

Washer, Lock, Split, 5/16

Washer, Flat, SAE, 5/16

Nut, Hex, 1/4 - 20

Washer, 1/4 SAE Flat

Belt, AX26

Screw, Hex HD, 1/4 - 20 x 3/4

Washer, 1/4 Split Lock

Plug, Rbbr Drain W/O Hole

Washer, #10 Split Lock

Blade 10" x 5/8"

Screw, Hex, HD, 5/16 - 18 x 1 - 1/4

Washer, #10 SAE Flat

Label, Warning, Read Manual

Label, Information on Service

Label, Caution, Guards in Place

Bushing, Blade 1-5.8 x .050

Label, Notice, Motor Problems

Nut, Hex 10 - 32

Screw, 10 - 32 x 1 Hex Head Cap

Tag, Serial Number, Blank

Assy, Oil Drain, 1/2NPT

Screw, Hex HD, Tap, 5/16-18x2

Nut, Hex Jam 5/8 - 11UNC LH

Guard, Splash

Guard, Blade PF-10

Pulley, 1A20 x 1/2 Bore

Spacer, Nylon 3/8 LG. x 1/2 OD

MTR, .33HP 115/230V 60Hz 1 PH

Nut, Wing 3/8 - 16

Screw, Thumb, 1/4 - 20 x 2.0

Label, Warning, Silica, Prop 65

Wrench, 3/16 Hex L-Key

26

153696

153950

154369

154398

155038

155587

155632

155672

156269

156270

157500-RW

157577-06

157938

158577

161023

161068

Part#

101196

134676

134684

135830

137711

151049

151052

151747

151754

151893

151915

152365

152370

152591

153439-NL

153684

161070

161076

161672

161715

161904

164202

165118

1

1

1

1

2

1

1

3

1

1

1

1

1

1

4

15

1

1

1

1

1

1

2

1

8

4

5

14

1

8

9

Quantity

4

1

1

4

9

2

2

4

BD10

BD-10 P/N 168787

56

57

58

59

53

54

55

60

61

62

49

50

51

52

45

46

47

48

Item

40

41

42

43

44

PARTS LIST

Part Description

Hex Cap Screw 1/4 - 20 x 5 - 1/2"

Cord, Power, 14/3 115V

Screw, Pan Head Self Sealing 10-32 x 3/4

Tank, Comp

Table, Comp

Assembly, Vise

Assy, Gear Motor, BD-10

Guard, Belt, Comp

Hood, Plastic, BD-10

Arbor Housing Casting Comp

Shaft, Arbor

Hinge, Comp

Gasket, Arbor

Screw, Pan HD 10 - 32 x 2.0"

Table, Rod

Washer, Slotted 3/8"

Base, Comp

Owner's Manual, BD-10

Grease, Super Lube, 3oz Tube

Assy, Carton, BD-10

Weldment, Motor Mount

Label, QR Code BD Manuals

Strip, Neoprene Foam, 1/2 x 1/4, 48"

168893

168909

168911

168949

169351

169709

169718

169726

171239

172553

Part#

166262

167180

167781

168789

168791

168792

168795

168804

168817

168825

168826

168835

168892

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Quantity

1

1

4

1

1

27

BD10 EXPLODED VIEW & PARTS LIST

BD-10 Assy. Gear Motor P/N 168795

5

9 3

2

1

7

8

4

7

8

5

6

9

Item

1

2

3

4

Part Description

Screw, rnd hd, #8-32x1/2

Screw, Hex HD FL 10-24x 5/16

Switch, Feed Toggle, 15A, DPDT

Screw, 4-40 x 3/4 socket head cap

Housing Casting Comp

Cover, Housing Comp

Gear Motor 5 RPM

Switch, Micro Snap Action

Label, ON/OFF

28

6

1

Part#

152517

159597

161052

164206

168797

168802

168832

168833

169352

Quantity

6

1

1

2

1

1

1

1

1

BD10

BD-10 Assy. Vise P/N 168792

EXPLODED VIEW

29

BD10

BD-10 Assy. Vise P/N 168792

PARTS LIST

30

31

32

26

27

28

29

33

34

22

23

24

25

17

18

19

20

21

13

14

15

16

10

11

8

9

12

6

7

4

5

Item

1

2

3

Part Description

Nut, Hex, 3/8 - 16

Washer, Flat, SAE, 3/8

Screw, 10 -32 x 1/2 Pan Head Phillips Machine

Washer, #10 SAE Flat

Screw, Pan HD, 1/4 - 20 x 1/4

Screw, Soc HD Set 1/4 - 20 x 1/4

Screw, Set Cup, #10 - 32 x 3/16" S.S.

Collar, Shaft 1/4 x 1/2

Nut, Wing 3/8 - 16

Knob, 1/4 - 20 x 2 Round

Screw, Pan Head Self Sealing 10 -32 x 3/4

Screw, Flat HD Phillips, #10 - 32 x 1/2, 18 - 8 S.S.

Carriage Complete

Vise, Complete

Vise Drive Mount

Rod, Swing Vise

Threaded Drive Rod

Guide Rod

Rock Adjustment Rod

On/Off Rod

Mount, Drive & Guide Rod

Bracket, Clutch Mount

Clutch Plate, Front

Clutch Plate, Rear

Coupler

Bearing, Ball 3/8" x 1 - 1/8"

Bearing Guide

Knob, Vise

Knob Assembly, Vise

Bushing, Bronze Flanged 5/16 x 9/16 x 1/2

Wood Clamp

Nut, Flanged 1/4 - 20

Spring, Complete

Screw, Soc HD cap, 1/4 - 20 x 1 - 3/4

30

1

1

2

2

2

1

2

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

2

2

2

1

Quantity

2

3

2

1

2

1

1

168822

168823

168869

168871

168873

168875

168879

168891

169707

168809

168810

168811

168812

168813

168814

168815

168816

168820

161066

161715

165163

167781

168284

168794

168800

168806

168807

Part#

101188

150923

151052

154369

157523

157528

161038

BD10 WARRANTY

BARRANCA DIAMOND LIMITED WARRANTY

Barranca Diamond warrants to the original retail purchaser for a period of 90 days except as noted, from the date of purchase all products covered by this Warranty to be free of defects in materials and workmanship.

This Warranty shall not apply to any parts that have been subjected to misuse or improper service, that had been damaged in transit or handling, or that have been altered or repaired by unauthorized representatives. This Warranty does not cover defects caused by or resulting from misuse, abuse, neglect or damage caused by accident or the failure to provide reasonable maintenance. This Warranty is void if the product or any of its individual components is altered or modified by the purchaser or if the product is used in a manner or with a blade not recommended by the manufacturer.

Any claim arising under this Warranty must be submitted by the original purchaser within the warranty period specified above, and shall include proof of purchase. During said warranty period Barranca

Diamond shall, at its option, either replace or repair, at no charge to the original purchaser, any parts or components that are found to be defective by Barranca Diamond. Barranca Diamond shall not be responsible for or obligated to pay for freight or other transportation related costs or expenses in connection with any defective products or components that are either returned to Barranca Diamond’s facility or any authorized repair station and/or any replacement products or components that are shipped from Barranca Diamond pursuant to this Warranty.

Parts and labor needed to maintain products and the replacement of components due to normal wear and tear are the purchaser’s responsibility and are not covered by this Warranty. All products or components replaced under warranty become the property of the manufacturer. All replacement parts will be considered to be part of the original product and any warranty on such parts will expire coincidentally with the original Warranty. Barranca Diamond will pay for parts and labor in connection with warranty repairs conducted by Barranca Diamond or its authorized repair centers. Replacement part(s) installed by anyone else will be provided without a charge for such replacement part(s), but this Warranty will not apply to labor charges in connection therewith.

IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT

COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF, AND BARRANCA DIAMOND

SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY

OTHER DAMAGE OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN.

The foregoing constitutes an expressed warranty on the terms set forth above and is the only warranty or warranties applicable to the products it covers. All other warranties, including, without limitation, the implied warranty of merchantability and/or fitness for a particular purpose or use being denied.

This limited warranty is expressly in lieu of all other warranties, whether expressed or implied.

WARRANTY: For your (1) one year warranty to be effective, complete the online Product

Registration as soon as possible. Visit www.mkdiamond.com/registration/

31

BD10 WARRANTY

SPECIFICS APPLICABLE TO LIMITED WARRANTY OF DIAMOND BLADES, CORE BITS, POLISHING

TOOLS AND SAWS

Laser Welded Blade and Bit Warranty

If the laser weld between the segment and the steel core or barrel fails during normal use, the blade or bit will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty.

Brazed Blade, Bit, and Cup Wheel Warranty

If the brazed bond between the segment and the core, barrel, or cup fails within the first .050 of segment wear, the blade, bit, or cup will be replaced free of charge. Blades, bits, and cup wheels damaged due to careless or improper use are not covered under this warranty.

Continuous Rim Blade Warranty

If the bond between the rim and the core fails during normal use, the blade will be replaced free of charge.

Blades and bits damaged due to careless or improper use are not covered under this warranty.

Exclusions

Barranca Diamond does not warrant the following components, which carry their own manufacturer’s warranty for the indicated periods:

Electric Motors Manufacturer’s Warranty

Baldor: 1 year

Ryobi: 1 Year

Soga: 1 Year

Gas Engines Manufacturer’s Warranty

Honda: 2 years

Engine Power Information

Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Barranca Diamond Products makes no claim, representation or Warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.

32

BD10 SERVICE & WARRANTY

Barranca Diamond. Please have the following information ready before calling:

•

•

•

REPLACEMENT PARTS

Replacement parts for this tool may be ordered from your Barranca Diamond distributor or directly from

Model and serial number of the machine

Date of purchase

Description of parts being ordered (see parts list) the following information available:

•

•

•

RETURN MATERIALS PROCEDURE

To expedite the service relative to the return of a product purchased through Barranca Diamond, please have

Model and serial number of the machine

Date of purchase

Distributor’s name

Then please call Barranca Diamond at (310) 523-5867 or toll free at 800-630-7682 to obtain a Return Goods

Authorization number (RGA) authorizing the return.

•

•

•

Please Note:

• Ensure your item(s) are prepaid to the destination

Return items must have been purchased within the previous twelve (12) months

Follow the packaging instructions in the following section

Be sure to include the RGA number, return address and your phone number on or within the return shipping box.

PACKAGING INSTRUCTIONS

Ship the equipment using its original shipping crate if possible. Secure inside the shipping crate. Ensure all parts are secured in the packaging to prevent movement. Do not ship the equipment partially exposed.

33

NOTES

34

NOTES

35

BD10 Power Feed Trim Saw

OWNER’S MANUAL & PARTS LIST

Barranca Diamond Products, Inc.

1315 Storm Parkway

Torrance, CA 90501

Toll-Free: (800) 630-7682

Phone: (310) 523-5867

Fax: (310) 257-3063 www.barrancadiamond.com