CAB COMBO WORKSHOP

OWNER’S MANUAL,

PARTS LIST

Revision 106 04.2019

Manual Part# 164271

Caution: Read all safety and operating instructions before using this equipment.

This manual MUST accompany the equipment at all times.

Barranca Diamond Products, Inc.

1315 Storm Parkway

Torrance, CA 90501

Toll-Free: (800) 630-7682

Phone: (310) 523-5867

Fax: (310) 257-3063 www.barrancadiamond.com

CAB COMBO WORKSHOP

CAB COMBO P/N 8300012

EXPLODED VIEW

34

CAB COMBO WORKSHOP

CAB COMBO P/N 8300012

29

30

31

32

24

25

26

27

28

20

21

22

23

17

18

19

37

38

39

33

34

35

36

13

14

15

16

9

10

11

12

6

7

4

5

8

2

3

Item

1

Description

Pad, Polishing 6" Polytex

Pad, Polishing 6" Leather

Nut, Hex, 5/16"-18

Fitting, Plastic, 1/4" FNPT X 1/4" BARB

Hose, Vinyl, 1/4" x 3/8" TSAW

Washer, 3/8" SAE Flat

Washer, 1/2" SAE Flat

Screw, Soc HD Cap, 1/4"-20 x 1"

Screw, Hex Head Machine, 5/16"-18 x 3/4"

Washer, 5/16" SAE Flat

Nut, Hex, 1/4"-20

Washer, 1/4" SAE Flat

Screw, Hex Head Machine, 5/16"-18 x 1/2"

Screw, Socket Head Cap, 1/4"-18 x 3/4"

GFCI, 120V, 15A

Screw, Hex, 3/8"-16 x 3/4"

Washer, SAE Flat, #10

Clamp, Hose 1/2" - 3/4"

Label, Safety

Pump, Water 115V, 60Hz

Nut, Hex 10-32

Screw, Shoulder Thumb, 1/4"-20 x 1"

Nut, 10-32

Pulley, 2" x 1/2" Bore

Belt, Micro-V AX-24

Barb Fitting, 1/8" NPTF

Bracket, Tool Rest LH

Cross, #10-32

Flap, Wheel

Gasket, Tank

Hood Weldment

Knob, 3/8"-16

Knob, Ridged, Gray

Top, Motor Mount

Bottom, Motor Mount

Motor 1/3 HP

Oil, Tool Cool, 8 oz.

Plug, Pipe 1/8"

Polishing Compind, 01 Micron

35

PARTS LIST

154369

154394

155806

155987-VP

156269

160461

161040

161070

161085_CC

161343

161442

161532

161557

161566

161629

161651

151369

151754

151893

151915

152473

152587

152610

153527

Part #

14615

14617

101196

128397

132951

150923

150924

151049

161652

161668

161669

161672

161729

161763

161766

1

2

3

1

10

1

1

1

2

1

1

1

6

2

1

1

1

1

1

1

1

3

1

1

4

6

7

2

10

7

11

6

2

1

1

1

Qty

3

1

2

CAB COMBO WORKSHOP

CAB COMBO P/N 8300012

PARTS LIST

53

54

55

50

51

52

56

57

58

59

63

64

65

60

61

62

66

67

46

47

48

49

43

44

45

Item

40

41

42

Description

Polishing Compund, 02 Micron

Polishing Compund, 2-4 Micron

Rod, Threaded 3/8" -16 x 6" LG

Screw, Flat Head Phillips Machine, 1/4"-20 x 3/4"

Screw, Pan Head Slot Machine, 10-32 x 1 1/2"

Screw, Pan Head Phillips 10-32 x 3/8"

Screw, Pan Head Phillips Machine, 1/4"-20 x 3/8"

Table, Weldment

Guard, Splash

Tool Rest

Valve, 10/32

Adaptor, Male Pipe 1/8" NPTF

Valve, 1/8" NPTFM x 1/4" Tube

Guard, Blade, Comp

Bracket, Hose Mount

Adaptor, Male Pipe 1/8" NPTF

Tubing, Clear PVC 1/8" x 1/4"

Tie, Nylon .10 x 4.0

Washer, Flat Large I.D. 1/2"

Clip, Hose Retainer

Guard, Belt

Tank, Casting Machined

Box, Shipping, Cab Combo

Bracket, Tool Rest RH

Assembly, Shaft

Guard, Inner Belt

Switch Assembly

Board, Base

161989

161991

161992

162152

162154

162315

162505

162506

162510

162511

Part #

161767

161768

161829

161856

161874

161875

161877

161964

161965

161974

164578

166064

166216

166439-02

166608

167860

168116

168706

1

3

1

3

2

1

2

1

1

1

1

1

1

1

1

1

1

1

4

1

6

Qty

1

1

2

1

2

4

1

36

CAB COMBO WORKSHOP

SHAFT P/N 166608

EXPLODED VIEW

37

CAB COMBO WORKSHOP

SHAFT P/N 166608

11

12

13

8

9

10

14

15

16

17

6

7

4

5

Item

1

2

3

Description

Flange, Outer 2"-3/8"

Blade, MK-303c, 6" x .020 x 5/8" Bore

Collar, Shaft w/ Set Screw

Pulley, 2" x 5/8" Bore

Pin Roll, 3/16" x 1"

Bearing, Rubber, 5/8" Shaft

Nut, Hex Jam, 5/8"-18 LH

Spacer, I

Spacer, II

Spacer, III

Nut, Hex Jam, 5/8"-18

Polishing Wheel, RH

Shaft, Arbor

Spacer, IV

Drum, 6" x 1-1/2" Expandable Rubber

Wheel, Brazed 80

Wheel, Brazed 170

PARTS LIST

162507

162508

162509

162897

166065

166414

166606

390006

496080

496200

Part #

135830

153692

161017

161020

161089

161348

161704

1

1

1

1

1

1

1

1

1

1

2

1

1

1

Qty

8

1

1

38

CAB COMBO WORKSHOP WARRANTY

BARRANCA DIAMOND LIMITED WARRANTY

Please complete the warranty registration card and return. Any problems encountered should be directed to Barranca Diamond Customer Service department at (800) 630-7682 M-F 8am - 5pm PST.

Barranca Diamond warrants to the original retail purchaser for a period of 90 days except as noted, from the date of purchase all products covered by this Warranty to be free of defects in materials and workmanship.

This Warranty shall not apply to any parts that have been subjected to misuse or improper service, that had been damaged in transit or handling, or that have been altered or repaired by unauthorized representatives. This Warranty does not cover defects caused by or resulting from misuse, abuse, neglect or damage caused by accident or the failure to provide reasonable maintenance. This Warranty is void if the product or any of its individual components is altered or modified by the purchaser or if the product is used in a manner or with a blade not recommended by the manufacturer.

Any claim arising under this Warranty must be submitted by the original purchaser within the warranty period specified above, and shall include proof of purchase. During said warranty period Barranca

Diamond shall, at its option, either replace or repair, at no charge to the original purchaser, any parts or components that are found to be defective by Barranca Diamond. Barranca Diamond shall not be responsible for or obligated to pay for freight or other transportation related costs or expenses in connection with any defective products or components that are either returned to Barranca Diamond’s facility or any authorized repair station and/or any replacement products or components that are shipped from Barranca Diamond pursuant to this Warranty.

Parts and labor needed to maintain products and the replacement of components due to normal wear and tear are the purchaser’s responsibility and are not covered by this Warranty. All products or components replaced under warranty become the property of the manufacturer. All replacement parts will be considered to be part of the original product and any warranty on such parts will expire coincidentally with the original Warranty. Barranca Diamond will pay for parts and labor in connection with warranty repairs conducted by Barranca Diamond or its authorized repair centers. Replacement part(s) installed by anyone else will be provided without a charge for such replacement part(s), but this Warranty will not apply to labor charges in connection therewith.

IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT

COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF, AND BARRANCA DIAMOND

SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY

OTHER DAMAGE OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN.

The foregoing constitutes an expressed warranty on the terms set forth above and is the only warranty or warranties applicable to the products it covers. All other warranties, including, without limitation, the implied warranty of merchantability and/or fitness for a particular purpose or use being denied.

This limited warranty is expressly in lieu of all other warranties, whether expressed or implied.

WARRANTY: For your (1) one year warranty to be effective, complete the online Product

Registration as soon as possible. Visit www.mkdiamond.com/registration/

39

CAB COMBO WORKSHOP WARRANTY

Specifics Applicable to Limited Warranty of Diamond Blades and Core Bits:

Laser Welded Blade and Bit Warranty:

If the laser weld between the segment and the steel core or barrel fails during normal use, the blade or bit will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty.

Brazed Blade, Bit, and Cup Wheel Warranty:

If the brazed bond between the segment and the core, barrel, or cup fails within the first .050 of segment wear, the blade, bit, or cup will be replaced free of charge. Blades, bits, and cup wheels damaged due to careless or improper use are not covered under this warranty.

Continuous Rim Blade Warranty:

If the bond between the rim and the core fails during normal use, the blade will be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under this warranty.

Exclusions:

Barranca Diamond does not warrant the following components, which carry their own manufacturer’s warranty for the indicated periods:

Electric Motors Manufacturer’s Warranty

Baldor: 1 year

Ryobi: 1 Year

Soga: 1 Year

Gas Engines Manufacturer’s Warranty

Honda: 2 years

Engine Power Information

Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Barranca Diamond Products makes no claim, representation or Warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.

40

CAB COMBO WORKSHOP WARRANTY

Barranca Diamond. Please have the following information ready before calling:

•

•

•

REPLACEMENT PARTS

Replacement parts for this tool may be ordered from your Barranca Diamond distributor or directly from

Model and serial number of the machine

Date of purchase

Description of parts being ordered (see parts list) the following information available:

•

•

•

RETURN MATERIALS PROCEDURE

To expedite the service relative to the return of a product purchased through Barranca Diamond, please have

Model and serial number of the machine

Date of purchase

Distributor’s name

Then please call Barranca Diamond at (310) 523-5867 or toll free at 800-630-7682 to obtain a Return Goods

Authorization number (RGA) authorizing the return.

•

•

•

Please Note:

• Ensure your item(s) are prepaid to the destination

Return items must have been purchased within the previous twelve (12) months

Follow the packaging instructions in the following section

Be sure to include the RGA number, return address and your phone number on or within the return shipping box.

PACKAGING INSTRUCTIONS

Ship the equipment using its original shipping crate if possible. Secure inside the shipping crate. Ensure all parts are secured in the packaging to prevent movement. Do not ship the equipment partially exposed.

41

42

43

CAB COMBO WORKSHOP

OWNER'S MANUAL

& PARTS LIST

Barranca Diamond Products, Inc.

1315 Storm Parkway

Torrance, CA 90501

Toll-Free: (800) 421-5830

Phone: (310) 539-5221

Fax: (310) 539-5158 www.barrancadiamond.com