Dell P1913s electronics accessory User's Guide

Add to my manuals
59 Pages

advertisement

Dell P1913s electronics accessory User's Guide | Manualzz

Dell™ P1913/P1913S/P2213 Monitor

User's Guide

Setting the display resolution

Information in this document is subject to change without notice.

© 2012 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United

States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model P1913b/P1913t/P1913Sb/P1913Sf/P2213f/P2213t

May 2012 Rev. A01

Dell™ P1913/P1913S/P2213 Monitor User's Guide

About Your Monitor

Setting Up the Monitor

Operating the Monitor

Troubleshooting

Appendix

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Information in this document is subject to change without notice.

© 2012 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United

States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model P1913b/P1913t/P1913Sb/P1913Sf/P2213f/P2213t

May 2012 Rev. A01

Back to Contents Page

About Your Monitor

Dell™ P1913/P1913S/P2213 Monitor User's Guide

Package Contents

Product Features

Identifying Parts and Controls

Monitor Specifications

Plug and Play Capability

Universal Serial Bus (USB) Interface

LCD Monitor Quality and Pixel Policy

Maintenance Guidelines

Package Contents

Your monitor ships with the components shown below. Ensure that you have received all the components and

contact Dell

if something is missing.

NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.

NOTE: To set up with any other stand, please refer to the respective stand setup guide for setup instructions.

NOTE: P1913/P1913S/P2213 monitor is BFR/PVC-free (Halogen-free) excluding external cables.

Monitor

Stand

Power Cable

VGA Cable (Attached to the monitor)

DVI Cable

USB upstream cable (enables the USB ports on the monitor)

Quick Setup Guide media

Product and Safety Information Guide

Product Features

The Dell Professional P1913/P1913S/P2213 flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features include:

¦ P1913 : 48.26 cm (19-inch) viewable area display (measured diagonally). 1440 x 900 resolution, plus full-screen support for lower resolutions.

¦ P1913S : 48.26 cm (19-inch) viewable area display (measured diagonally). 1280 x 1024 resolution, plus full-screen support for lower resolutions.

¦ P2213 : 55.88 cm (22-inch) viewable area display (measured diagonally). 1680 x 1050 resolution, plus full-screen support for lower resolutions.

¦ Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side.

¦ Tilt, swivel, vertical extension and rotate adjustment capability.

¦ Removable stand and Video Electronics Standards Association (VESA

) 100 mm mounting holes for flexible mounting solutions.

¦ Plug and play capability if supported by your system.

¦ On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

¦ Software and documentation media includes an Information File (INF), Image Color Matching File (ICM), Dell Display Manager software application and product documentation.

¦ Energy Saver feature for Energy Star compliance.

¦ Security lock slot.

¦ Stand lock.

¦ Asset Management Capability.

¦ Capability to switch from wide aspect to standard aspect ratio while maintaining the image quality.

¦ EPEAT Gold Rating.

¦ P1913/P1913S/P2213 monitor is BFR/PVC-free (Halogen-free) excluding external cables.

¦ TCO-Certified Displays.

¦ Dell Display Manager software included (comes in the CD shipped with the monitor).

¦ Arsenic-Free glass and Mercury-Free for the panel only.

¦ High Dynamic Contrast Ratio (2,000,000:1).

¦ 0.3 W standby power when in the sleep mode.

¦ Energy Gauge shows the energy level being consumed by the monitor in real time.

Identifying Parts and Controls

Front View

Label

1

Description

Function buttons (For more information, see

Operating the

Monitor

)

2 Power On/Off button (with LED indicator)

Front panel controls

Back View

Back View with monitor stand

Label

1

Description

VESA mounting holes (100 mm x 100 mm

- behind attached VESA Plate)

2 Regulatory label

3 Stand release button

4 Barcode serial number label

5 Security lock slot

6 Dell Soundbar mounting brackets

7 Cable management slot

Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm).

Lists the regulatory approvals.

Release stand from monitor.

Use

Refer to this label if you need to contact Dell for technical support.

Secures monitor with security cable lock.

Attaches the optional Dell Soundbar.

Use to organize cables by placing them through the slot.

Side View

Bottom View

Label Description

1 AC power cord connector

2 DC power connector for Dell Soundbar

3 DP connector

4 VGA connector

Bottom view without monitor stand

Use

Connect the power cable.

Connect the power cord for the soundbar (optional).

Connect your computer DP cable.

Connect your computer VGA cable.

5 DVI connector

6 USB upstream port

7 USB downstream port

8 Stand lock feature

Connect your computer DVI cable. computer. Once this cable is connected, you can use the USB connectors on the monitor.

Connect your USB device. You can only use this connector after you have connected the USB cable to the computer and USB upstream connector on the monitor. provided).

Model

Screen type

Panel type

Screen dimensions

Preset display area:

Horizontal

Vertical

Pixel pitch

Viewing angle

Luminance output

Contrast ratio

Faceplate coating

Backlight

Response time

Color depth

Color gamut

Monitor Specifications

Flat Panel Specifications

P1913

Active matrix - TFT LCD

P1913S

Active matrix - TFT LCD

P2213

Active matrix - TFT LCD

TN TN TN

482.6 mm (19-inches diagonal viewable image size)

482.6 mm (19-inches diagonal viewable image size)

558.8 mm (22-inches diagonal viewable image size)

408.2 mm (16.07 inches)

255.2 mm (10.05 inches)

376.3 mm (14.81 inches)

301.1 mm (11.85 inches)

473.8 mm (18.65 inches)

296.1 mm (11.66 inches)

0.2835 mm

160° (vertical) typical

170° (horizontal) typical

250 cd/m² (typical)

1000 to 1 (typical)

2M to 1 (typical Dynamic Contrast On)

Antiglare with hard-coating 3H

LED edgelight system

5 ms black to white (typical)

16.7 million colors

83%*

0.294 mm

160° (vertical) typical

170° (horizontal) typical

250 cd/m² (typical)

1000 to 1 (typical)

2M to 1 (typical Dynamic Contrast On)

Antiglare with hard-coating 3H

LED edgelight system

5 ms black to white (typical)

16.7 million colors

83%*

0.282 mm

160° (vertical) typical

170° (horizontal) typical

250 cd/m² (typical)

1000 to 1 (typical)

2M to 1 (typical Dynamic Contrast On)

Antiglare with hard-coating 3H

LED edgelight system

5 ms black to white (typical)

16.7 million colors

83%*

*[P1913]/[P1913S]/[P2213] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.

Resolution Specifications

Model P1913 P1913S

Horizontal scan range

Vertical scan range

30 kHz to 81 kHz (automatic)

56 Hz to 76 Hz (automatic)

Maximum preset resolution 1440 x 900 at 60 Hz 1280 x 1024 at 60 Hz

P2213

30 kHz to 83 kHz (automatic)

56 Hz to 75 Hz (automatic)

1680 x 1050 at 60 Hz

Supported Video Modes

Model

Video display capabilities (DVI & DP playback)

P1913/P1913S/P2213

480p, 480i, 576p, 576i, 720p, 1080p, 1080i

Preset Display Modes

P1913

Display Mode

VESA, 720 x 400

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 800

VESA, 1280 x 1024

VESA, 1280 x 1024

VESA, 1440 x 900

VESA, 1440 x 900

Horizontal Frequency

(kHz)

31.5

31.5

37.5

37.9

46.9

60.0

67.5

49.3

64.0

80.0

55.5

70.6

Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)

70.0

60.0

75.0

60.3

75.0

75.0

75.0

59.9

60.0

75.0

60.0

75.0

28.3

25.2

31.5

40.0

49.5

78.8

108.0

71.0

108.0

135.0

106.5

136.8

-/+

-/-

-/-

+/+

+/+

+/+

+/+

+/-

+/+

+/+

-/+

-/+

P1913S

Display Mode

VESA, 720 x 400

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024

P2213

Display Mode

VESA, 720 x 400

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024

VESA, 1680 x 1050

VESA, 1680 x 1050

Horizontal Frequency

(kHz)

31.5

31.5

37.5

37.9

46.9

48.4

60.0

67.5

64.0

80.0

Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)

70.0

60.0

75.0

60.3

75.0

60.0

75.0

75.0

60.0

75.0

28.3

25.2

31.5

40.0

49.5

65.0

78.8

108.0

108.0

135.0

-/+

-/-

-/-

+/+

+/+

-/-

+/+

+/+

+/+

+/+

Horizontal Frequency

(kHz)

31.5

31.5

37.5

37.9

46.9

48.4

60.0

67.5

64.0

80.0

65.2

82.3

Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)

70.0

60.0

75.0

60.0

75.0

60.0

75.0

75.0

60.0

75.0

60.0

75.0

28.3

25.2

31.5

40.0

49.5

65.0

78.8

108.0

108.0

135.0

146.0

187.0

-/+

-/-

-/-

+/+

+/+

-/-

+/+

+/+

+/+

+/+

-/+

-/+

Electrical Specifications

Model

Video input signals

Synchronization input signals

AC input voltage/frequency/current

Inrush current

P1913/P1913S/P2213

Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance

Digital DVI-D TMDS, 600 mV for each differential line, positive polarity at 50 ohm input impedance

DP 1.2 signal input support*

Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite

SYNC on green)

100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (typical)

120 V : 30 A (Max)

240 V : 60 A (Max)

*Support DP1.2 (CORE) specification. Excludes High Bit Rate 2 (HBR2), Fast AUX transaction, Multi-stream transport (MST), 3D stereo transport , HBR Audio (or high data rate audio)

Physical Characteristics

Model

Connector type

Signal cable type

P1913

15-pin D-subminiature, blue connector; DVI-D, white connector;

Digital: detachable, DVI-D, solid pins, shipped detached from the monitor

Digital: DisplayPort, 20pin

Analog: attachable, D-Sub,

15 pins, shipped attached to the monitor

P1913S

15-pin D-subminiature, blue connector; DVI-D, white connector;

Digital: detachable, DVI-D, solid pins, shipped detached from the monitor

Digital: DisplayPort, 20pin

Analog: attachable, D-Sub,

15 pins, shipped attached to the monitor

P2213

15-pin D-subminiature, blue connector; DVI-D, white connector;

Digital: detachable, DVI-D, solid pins, shipped detached from the monitor

Digital: DisplayPort, 20pin

Analog: attachable, D-Sub,

15 pins, shipped attached to the monitor

Dimensions (with stand)

Height

(extended)

Height

(compressed)

Width

476.4 mm ( 18.76 inches)

356.9 mm (14.05 inches)

443.8 mm (17.47 inches)

Depth 183.3 mm (7.22 inches)

Dimensions (without stand)

Height 290.8 mm (11.45 inches)

Width 443.8 mm (17.47 inches)

500.1 mm (19.69 inches)

370.1 mm (14.57 inches)

411.9 mm (16.22 inches)

183.3 mm (7.22 inches)

336.7 mm (13.26 inches)

411.9 mm (16.22 inches)

497.4 mm (19.58 inches)

368.9 mm (14.52 inches)

510.4 mm (20.09 inches)

183.3 mm (7.22 inches)

332.7 mm (13.10 inches)

510.4 mm (20.09 inches)

Depth 58.5 mm (2.30 inches)

Stand dimensions

Height

(extended)

Height

(compressed)

Width

401.2 mm (15.80 inches)

356.9 mm (14.05 inches)

265.8 mm (10.46 inches)

183.3 mm (7.22 inches) Depth

Weight

Weight with packaging

Weight with stand assembly and cables

Weight without stand assembly

(For wall mount or VESA mount considerations no cables)

Weight of stand assembly

5.87 kg (12.91 lb)

4.75 kg (10.45 lb)

2.52 kg (5.54 lb)

1.73 kg (3.81 lb)

Front frame gloss

59.3 mm (2.33 inches)

401.2 mm (15.80 inches)

356.9 mm (14.05 inches)

265.8 mm (10.46 inches)

183.3 mm (7.22 inches)

6.75 kg (14.85 lb)

5.23 kg (11.51 lb)

2.95 kg (6.49 lb)

2.00 kg (4.40 lb)

Black Frame - 5.0 gloss unit (max.)

Silver Frame - 20.0 gloss unit (max.)

Environmental Characteristics

P1913 Model

Temperature

Operating

Non-operating

Humidity

Operating

Non-operating

Altitude

P1913S

0 °C to 40 °C

Storage: -20 °C to 60 °C (-4 °F to 140 °F)

Shipping: -20 °C to 60 °C (-4 °F to 140 °F)

10% to 80% (non-condensing)

Storage: 5% to 90% (non-condensing)

Shipping: 5% to 90% (non-condensing)

59.8 mm (2.35 inches)

401.2 mm (15.80 inches)

356.9 mm (14.05 inches)

265.8 mm (10.46 inches)

183.3 mm (7.22 inches)

7.43 kg (16.35 lb)

5.71 kg (12.56 lb)

3.43 kg (7.55 lb)

1.73 kg (3.81 lb)

P2213

Operating

Non-operating

Thermal dissipation

3,048 m (10,000 ft) max

10,668 m (35,000 ft) max

143.31 BTU/hour

(maximum)

58.01 BTU/hour

(typical)

10,668 m (35,000 ft) max

143.31 BTU/hour

(maximum)

58.01 BTU/hour

(typical)

10,668 m (35,000 ft) max

153.59 BTU/hour

(maximum)

85.33 BTU/hour

(typical)

Power Management Modes

as Power Save Mode *. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:

VESA

Modes

Normal operation

Active-off mode

Switch off

Horizontal

Sync

Active

Inactive

-

Vertical

Sync

Active

-

Video

Active

Inactive Blanked

-

Power

Indicator

Blue

Amber

Off

P1913

17 W (typical)

Less than 0.3 W

Less than 0.3 W

Power Consumption

P1913S

Less than 0.3 W

P2213

42 W (maximum) ** 42 W (maximum) ** 45 W (maximum) **

17 W (typical)

Less than 0.3 W

25 W (typical)

Less than 0.3 W

Less than 0.3 W

The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed:

Activate the computer and the monitor to gain access to the OSD.

NOTE: This monitor is ENERGY STAR

®

-compliant.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

** Maximum power consumption with max luminance, Dell Soundbar, and USB active.

Pin Assignments

VGA Connector

10

11

12

13

14

8

9

6

7

Pin

Number

15-pin Side of the Connected Signal Cable

1 Video-Red

2

3

Video-Green

Video-Blue

4

5

GND

Self-test

15

GND-R

GND-G

GND-B

Computer 5 V/3.3 V

GND-sync

GND

DDC data

H-sync

V-sync

DDC clock

DVI Connector

Pin

Number

1

2

3

4

5

14

15

16

17

18

19

10

11

12

13

6

7

8

9

24-pin Side of the Connected Signal Cable

TMDS RX2-

TMDS RX2+

TMDS Ground

Floating

Floating

DDC Clock

DDC Data

Floating

TMDS RX1-

TMDS RX1+

TMDS Ground

Floating

Floating

+5 V/+3.3 V power

Self test

Hot Plug Detect

TMDS RX0-

TMDS RX0+

TMDS Ground

20

21

22

23

24

Floating

Floating

TMDS Ground

TMDS Clock+

TMDS Clock-

DisplayPort Connector

Pin Number

9

10

11

12

13

14

7

8

5

6

3

4

1

2

20-pin Side of the Connected

Signal Cable

ML2(n)

ML3(p)

GND

ML3(n)

GND

GND

ML0(p)

GND

ML0(n)

ML1(p)

GND

ML1(n)

ML2(p)

GND

15

16

17

18

19

20

AUX(p)

GND

AUX(n)

HPD

Re-PWR

PWR

Plug and Play Capability

using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see

Operating the Monitor .

Universal Serial Bus (USB) Interface

This section gives you information about the USB ports that are available on the monitor.

NOTE: This monitor supports High-Speed Certified USB 2.0 interface.

Transfer Speed Data

Rate

High speed

Power Consumption

480 Mbps 2.5 W (Max, each port)

Full speed

Low speed

12 Mbps

1.5 Mbps

2.5 W (Max, each port)

2.5 W (Max, each port)

USB Upstream Connector

Pin Number 4-pin Side of the Connector

1

DMU

2

3

VCC

DPU

4

GND

USB Downstream Connector

Pin Number

1

2

3

4

4-Pin Side of the Signal Cable

VCC

DMD

DPD

GND

USB Ports

1 upstream - back

2 downstream - back

NOTE: USB 2.0 functionality requires a USB 2.0-capable computer.

NOTE: The monitor's USB interface works only when the monitor is On or in the power save mode. If you turn Off the monitor and then turn it On, the attached peripherals may

take a few seconds to resume normal functionality.

LCD Monitor Quality and Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com

.

Maintenance Guidelines

Cleaning Your Monitor

CAUTION:

Read and follow the safety instructions

before cleaning the monitor.

WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:

To clean your anti-static screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the anti-static coating.

Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.

If you notice white powder when you unpack your monitor, wipe it off with a cloth.

Handle your monitor with care as a darker-colored monitor may get scratched and show white scuff marks more than a lighter-colored monitor.

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.

Back to Contents Page

Back to Contents Page

Setting Up the Monitor

Dell™ P1913/P1913S/P2213 Monitor User's Guide

Attaching the Stand

Connecting the Monitor

Organizing Your Cables

Attaching Dell Soundbar AX510/AY511 (Optional)

Removing the Monitor Stand

Wall Mounting (Optional)

Attaching the Stand

NOTE: The stand is detached when the monitor is shipped from the factory.

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set up instructions.

To attach the monitor stand:

1. Remove the cover and place the monitor on it.

3. Press the stand till it snaps into place.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the

Safety Instructions .

To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable.

Connect the blue (VGA) cable from your monitor to the computer.

NOTE: If your computer supports a white DVI connector, connect the white DVI cable to the monitor and the white DVI connector to your computer.

NOTE:

Do not connect the blue VGA or the white DVI cable to the computer at the same time.

2. Connect the white (digital DVI-D) or the blue (analog VGA) or the black (DisplayPort) display connector cable to the corresponding video port on the back of your computer. Do not use the three cables on the same computer. Use all cables only when they are connected to three different computers with appropriate video systems.

Connecting the white DVI cable

Connecting the blue VGA cable

Connecting the black DisplayPort cable

CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.

Connecting the USB cable

After you have completed connecting the DVI/VGA cable, follow the procedures below to connect the USB cable to the computer and complete your monitor setup:

1.

2.

Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer. (See

Connect the USB peripherals to the downstream USB ports on the monitor.

3. Plug the power cables for your computer and monitor into a nearby outlet.

bottom

view for details.)

4. Turn on the monitor and the computer.

5.

If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems .

Use the cable slot on the monitor stand to organize the cables.

Organizing Your Cables

After attaching all necessary cables to your monitor and computer, (See

Connecting Your Monitor

for cable attachment,) organize all cables as shown above.

Attaching Dell Soundbar AX510/AY511 (Optional)

CAUTION: Do not use with any device other than the Dell Soundbar.

NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar only.

To attach the Soundbar:

1. At the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.

2. Slide the Soundbar to the left until it snaps into place.

3. Connect the Soundbar with the DC power connector.

4. Insert the mini stereo plug from the back of the Soundbar into the computer's audio output port.

For HDMI/DP, you can insert the mini stereo plug into the monitor’s audio output port. If there is no sound, check your PC if the Audio output is configured to

HMDI/DP output.

Removing the Monitor Stand

NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface.

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set-up instructions.

To remove the stand:

1. Place the monitor on a flat surface.

2. Press and hold the stand release button.

3. Lift the stand up and away from the monitor.

Wall Mounting (Optional)

(Screw dimension: M4 x 10 mm).

Refer to the instructions that come with the VESA-compatible wall mounting kit.

2. Remove the stand.

3. Use a Philips crosshead screwdriver to remove the four screws securing the plastic cover.

4. Attach the mounting bracket from the wall mounting kit to the monitor.

NOTE: For use only with UL-listed wall mount bracket with minimum weight/load bearing capacity of 5.88 kg.

Back to Contents Page

Back to Contents Page

Operating the Monitor

Dell™ P1913/P1913S/P2213 Monitor User's Guide

Power On the Monitor

Using the Front Panel Controls

Using the On-Screen Display (OSD) Menu

Setting the Maximum Resolution

Using Dell Soundbar

Using the Tilt, Swivel, and Vertical Extension

Rotating the Monitor

Adjusting the Rotation Display Settings of Your System

Power On the Monitor

Press the button to turn on the monitor

Using the Front Panel Controls

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.

The following table describes the front panel buttons:

Front Panel Button Description

1

Shortcut key/Preset

Modes

Use this button to choose from a list of preset color modes.

2

Shortcut key/

Brightness/Contrast

Use this button to directly access the "Brightness/Contrast" menu.

3 Use the MENU button to launch the On-Screen Display (OSD) and select the OSD Menu. See

Accessing the Menu System

.

Menu

4 Use this button to go back to the main menu or exit the OSD main menu.

Exit

5

Use the Power button to turn the monitor On and Off.

The blue LED indicates the monitor is On and fully functional. An amber LED indicates the power save mode.

Power

(with power light indicator)

Front Panel Button

Use the buttons

on the front of the monitor to adjust the image settings.

Front Panel Button

1

Up

2

Down

3

OK

4

Back

Description

Use the Up button to adjust (increase ranges) items in the OSD menu.

Use the Down button to adjust (decrease ranges) items in the OSD menu.

Use the OK button to confirm your selection.

Use the Back button to go back to the previous menu.

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

1. Press the button to launch the OSD menu and display the main menu.

Main Menu for analog (VGA) input or

Main Menu for digital (DVI) input

or

Main Menu for di gital (DP) input

NOTE: Auto Adjust is only available when you use the analog (VGA) connector.

NOTE: For P1913, the maximum resolution is 1440 x 900 @ 60Hz. For P1913S, the maximum resolution is 1280 x 1024 @ 60Hz.

2. Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.

3. Press the button once to activate the highlighted option.

4. Press and button to select the desired parameter.

5. Press to enter the slide bar and then use the and buttons, according to the indicators on the menu, to make your changes.

6. Select the

Icon button to return to the main menu.

Menu and Submenus

Brightness / Contrast Use this menu to activate Brightness/Contrast adjustment.

Description

Brightness

Contrast

Brightness adjusts the luminance of the backlight.

Press the button to increase the brightness and press the button to decrease the brightness (min 0 / max 100).

NOTE: Manual adjustment of Brightness is disabled when Energy Smart or Dynamic Contrast is switched On.

Adjust the Brightness first, and then adjust the Contrast only if further adjustment is necessary.

Press the button to increase the contrast and press the button to decrease the contrast (min 0 / max 100).

Auto Adjust Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Display Settings.

Input Source

NOTE: In most cases, Auto Adjust produces the best image for your configuration.

NOTE: Auto Adjust option is only available when you are using the analog (VGA) connector.

Use the Input Source menu to select between the different video signals that may be connected to your monitor.

Auto Select

VGA

DVI-D

Press

Select the to select Auto Select , the monitor auto detects either the VGA input or the DVI-D input or DislpayPort input.

VGA input when you are using the analog (VGA) connector. Press to select the VGA input source.

DisplayPort

Color Settings

Select the DVI-D input when you are using the Digital (DVI) connector. Press to select the DVI input source.

Select the DisplayPort input when you are using the DisplayPort (DP) connector. Press

Use Color Settings to adjust the color setting mode. to select the DisplayPort input source.

Input Color Format Allows you to set the video input mode to:

RGB : Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable.

YPbPr : Select this option if your monitor is connected to a DVD player by YPbPr to VGA, or YPbPr to DVI cable; or if the DVD color output setting

Preset Modes When you select Preset Modes , you can choose Standard , Multimedia , Movie , Game , Text , Warm , Cool or Custom Color from the list.

Standard

Text

Cool

: Loads brightness and sharpness settings ideal for viewing texts.

: Loads the monitor's default color settings. This is the default preset mode.

Multimedia : Loads color settings ideal for multimedia applications.

Movie : Loads color settings ideal for movies.

Game : Loads color settings ideal for most gaming applications.

Warm : Increase the color temperature. The screen appears warmer with a red/yellow tint.

Custom Color : Allows you to manually adjust the color settings. Press the values and create your own preset color mode. and buttons to adjust the three colors (R, G, B)

Hue

Saturation

Reset Color Settings

Display Settings

This feature can shift the color of the video image to green or purple. This is used to adjust the desired flesh tone color. Use adjust the hue from '0' to '100'.

Press

Press to increase the green shade of the video image.

to increase the purple shade of the video image.

NOTE: : Hue adjustment is available only when you select Movie or Game preset mode. to adjust the saturation from '0' to '100'. This feature can adjust the color saturation of the video image. Use

Press

Press to increase the monochrome appearance of the video image. to increase the colorful appearance of the video image. or

NOTE: Saturation adjustment is available only when you select Movie or Game preset mode.

Reset your monitor color settings to the factory settings. or to

Use the Display Settings to adjust image.

Aspect Ratio

Horizontal Position

Vertical Position

Sharpness

Pixel Clock

Phase

NOTE: Aspect Ratio is not available in P1913S.

Adjust the image ratio to Wide 16:10, 5:4 or 4:3.

NOTE: Aspect Ratio is not available in P1913S.

Use or to adjust the image left or right. Minimum is '0' (-). Maximum is '100' (+).

Use or to adjust the image up or down. Minimum is '0' (-). Maximum is '100' (+).

NOTE: Horizontal Position and Vertical Position adjustments are only available for "VGA" input.

This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100'.

The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.

Use or to adjust for best image quality.

If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.

Dynamic Contrast

Reset Display Settings

Other Settings

NOTE: Pixel Clock and Phase adjustments are only available for "VGA" input.

Dynamic Contrast adjusts the contrast ratio to 2M to 1.

Press the button to select the Dynamic Contrast "On" or "Off" .

NOTE: Dynamic Contrast provides higher contrast if you select Game or Movie preset mode.

Select this option to restore default display settings.

Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on.

Language

Menu Transparency

Menu Timer

Menu Lock

Language options set the OSD display to one of the eight languages (English, Spanish, French, German, Brazilian Portuguese, Russian, Simplified

Chinese or Japanese).

Select this option to change the menu transparency by pressing the and buttons (Minimum: 0 ~ Maximum: 100).

OSD Hold Time: sets the length of time the OSD will remain active after the last time you pressed a button.

Use or to adjust the slider in 1 second increments, from 5 to 60 seconds.

Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked.

NOTE:

Menu Rotation

Energy Smart

Power Save Audio

DDC/CI

Lock function – Either soft lock (through the OSD menu) or hard lock (press and hold the button above the power button for 10 seconds)

Unlock function– Only hard unlock (press and hold the button above the power button for 10 seconds)

Rotates the OSD by 90 degrees counter-clockwise. You can adjust the menu according to your

Display Rotation .

To turn on or off dynamic dimming.

The dynamic dimming feature automatically reduces the screen's brightness level when the displayed image contains a high proportion of bright areas.

To turn on or off Audio Power during Power Save mode.

Enable this feature for best user experience and optimum performance of your monitor.

LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can enable this feature by selecting "Enable".

Factory Reset

Personalize

Reset all OSD settings to the factory preset values.

Users can choose a feature from "Preset Modes", "Brightness/Contrast", "Auto Adjust", "Input Source", "Aspect Ratio" or "Menu Rotation" and set it as a shortcut key.

NOTE: This monitor has a built-in feature to automatically calibrate the brightness to compensate for LED aging.

OSD Warning Messages

When the Energy Smart or Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled.

When the monitor does not support a particular resolution mode, you will see the following message:

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See

Monitor Specifications

for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1440 x 900 (for the P1913)/1280 x 1024 (for the P1913S)/1680 x 1050 (for the P2213).

You will see the following message before the DDC/CI function is disabled:

When the monitor enters the Power Save mode, the following message appears:

Activate the computer and wake up the monitor to gain access to the OSD .

If you press any button other than the power button, one of the following messages will appear depending on the selected input:

VGA/DVI-D/DP input

If either VGA or DVI-D or DP input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears. or

See

Solving Problems

for more information. or

Setting the Maximum Resolution

To set the maximum resolution for the monitor:

Windows Vista

® or Windows

®

7:

2. Click

4. Click OK .

Change Display Settings .

Personalization .

3. Move the slider-bar to the right by pressing and holding the left mouse button and adjust the screen resolution.

If you do not see the recommended resolution as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following procedures:

If you have a Dell desktop or portable computer:

Go to support.dell.com

, enter your service tag, and download the latest driver for your graphics card.

If you are using a non-Dell computer (portable or desktop):

Go to the support site for your computer and download the latest graphic drivers.

Go to your graphics card website and download the latest graphic drivers.

Using Dell Soundbar

The soundbar has an on/off power and rotary volume control to adjust the overall sound system, a LED for power indication and two audio headset jacks.

1 Attach mechanism

2 Power/Volume control

3 Headphone jacks

4 Power indicator

Using the Tilt, Swivel, and Vertical Extension

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions.

Tilt, Swivel

With the stand attached to the monitor, you can tilt and swivel the monitor for the most comfortable viewing angle.

NOTE: The stand is detached when the monitor is shipped from the factory.

Vertical Extension

NOTE: The stand extends vertically up to 130 mm. The figure below illustrates how to extend the stand vertically.

Rotating the Monitor

Before you rotate the monitor, your monitor should be fully vertically extended (

Vertical Extension ) and fully tilted ( Tilt ) up to avoid hitting the bottom edge of the monitor.

NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. To download the graphics driver, go to support.dell.com and see the Download section for Video Drivers for latest driver updates.

NOTE: When in the Portrait View Mode , you may experience performance degradation in graphic-intensive applications (3D Gaming and etc.).

Adjusting the Rotation Display Settings of Your System

After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your System.

NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the

'contents' on your display.

To adjust the Rotation Display Settings:

1. Right-click on the desktop and click Properties .

2. Select the Settings tab and click Advanced

3. If you have an ATI graphics card, select the

.

Rotation

If you have an nVidia graphics card, click the

If you have an Intel

® nVidia graphics card, select the Intel tab and set the preferred rotation. tab, in the left-hand column select graphics tab, click

NVRotate

Graphic Properties

, and then select the preferred rotation.

, select the Rotation tab, and then set the preferred rotation.

NOTE: If you do not see the rotation option or it is not working correctly, go to support.dell.com and download the latest driver for your graphics card.

Back to Contents Page

Back to Contents Page

Troubleshooting

Dell™ P1913/P1913S/P2213 Monitor User's Guide

Self-Test

Built-in Diagnostics

Common Problems

Product Specific Problems

Universal Serial Bus (USB) Specific Problems

Dell™ Soundbar Problems

WARNING: Before you begin any of the procedures in this section, follow the

Safety Instructions .

Self-Test

Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

3. Turn on the monitor.

The floating dialog box should appear on-screen (against a black background), if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains blue. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen. or or

4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged.

5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.

Built-in Diagnostics

Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card.

NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode .

To run the built-in diagnostics:

2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode.

3. Press and hold Button 1 and Button 4 on the front panel simultaneously for 2 seconds. A gray screen appears.

4. Carefully inspect the screen for abnormalities.

5. Press Button 4 on the front panel again. The color of the screen changes to red.

6. Inspect the display for any abnormalities.

The test is complete when the white screen appears. To exit, press Button 4 again.

If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.

Common Problems

The following table contains general information about common monitor problems you might encounter and the possible solutions:

Common Symptoms

No Video/Power LED off

What You Experience

No picture

Possible Solutions

Ensure that the video cable connecting the monitor and the computer is properly connected and secure.

Verify that the power outlet is functioning properly using any other electrical equipment.

Ensure that the power button is depressed fully.

Input Source Select

button.

No Video/Power LED on

Poor Focus

No picture or no brightness

Picture is fuzzy, blurry, or ghosting

Perform monitor self-test feature check.

Check for bent or broken pins in the video cable connector.

Ensure that the correct input source is selected via the

Input Source Select

button.

Perform Auto Adjust via OSD.

Adjust the Phase and Pixel Clock controls via OSD.

Eliminate video extension cables.

Shaky/Jittery Video

Missing Pixels

Stuck-on Pixels

Wavy picture or fine movement

LCD screen has spots

LCD screen has bright spots

Perform Auto Adjust via OSD.

Adjust the Phase and Pixel Clock controls via OSD.

Check environmental factors.

Cycle power on-off.

Pixel that is permanently off is a natural defect that can occur in LCD technology. support.dell.com

.

Cycle power on-off.

Pixel that is permanently off is a natural defect that can occur in LCD technology. support.dell.com

.

Brightness Problems Picture too dim or too bright

Geometric Distortion Screen not centered correctly

Reset the monitor to Factory Settings.

Auto Adjust via OSD.

Reset the monitor to Factory Settings.

Auto Adjust via OSD.

Horizontal/Vertical Lines Screen has one or more lines

NOTE: When using DVI-D/DisplayPort input, the positioning adjustments are not available.

Reset the monitor to Factory Settings.

Perform Auto Adjust via OSD.

Adjust Phase and Pixel Clock controls via OSD.

Perform monitor self-test feature check and determine if these lines are also in self-test mode.

Check for bent or broken pins in the video cable connector.

NOTE: When using DVI-D/DisplayPort input, the Pixel Clock and Phase adjustments are not available.

Synchronization Problems

Safety Related Issues

Intermittent Problems

Missing Color

Wrong Color

Screen is scrambled or appears torn

Visible signs of smoke or sparks

Monitor malfunctions on & off

Picture missing color

Picture color not good

Image retention from a static image left on the monitor for a long period of time

Faint shadow from the static image displayed appears on the screen

Reset the monitor to Factory Settings.

Perform Auto Adjust via OSD.

Adjust Phase and Pixel Clock controls via OSD.

Perform monitor self-test feature check to determine if the scrambled screen appears in self-test mode.

Check for bent or broken pins in the video cable connector. safe mode .

Do not perform any troubleshooting steps.

Contact Dell immediately.

Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.

Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.

Perform monitor self-test feature check.

Check for bent or broken pins in the video cable connector.

Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application.

Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color Settings OSD if the Color

Management is turned off.

Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.

Run the built-in diagnostics.

Use the Power Management feature to turn off the monitor at all times when not in use (for more information, see

Power Management Modes ).

Alternatively, use a dynamically changing screensaver.

Product Specific Problems

pressed

Specific Symptoms

Screen image is too small

Cannot adjust the monitor with the buttons on the front panel

No Input Signal when user controls are

What You Experience

Image is centered on screen, but does not fill entire viewing area

OSD does not appear on the screen

No picture, the LED light is blue.

The picture does not fill the entire screen. width of the screen

NOTE: When choosing DVI-D mode, the Auto Adjust function will not be available.

Possible Solutions

Check the Scaling Ratio setting in the Image Setting OSD.

Reset the monitor to Factory Settings. seconds to unlock (for more information, see

Menu Lock ).

Check the signal source. Ensure the Computer is not in the power saving mode by moving the mouse or pressing any key on the keyboard.

Check whether the signal cable is plugged in properly. Re-plug the signal cable if necessary.

Due to different video formats (aspect ratio) of DVDs, the monitor may display in full screen.

Run the built-in diagnostics.

Universal Serial Bus (USB) Specific Problems

Specific Symptoms

USB interface is not working

What You Experience

USB peripherals are not working

Possible Solutions

Check that your monitor is turned ON.

Reconnect the upstream cable to your computer.

Reconnect the USB peripherals (downstream connector).

Switch off and then turn on the monitor again.

Reboot the computer.

Some USB devices like external portable HDD require higher electric current; connect the device directly to the computer system.

High Speed USB 2.0 interface is slow. High Speed USB 2.0 peripherals working slowly or not working at all

Check that your computer is USB 2.0-capable.

Some computers have both USB 2.0 and USB 1.1 ports. Ensure that the correct USB port is used.

Reconnect the upstream cable to your computer.

Reconnect the USB peripherals (downstream connector).

Reboot the computer.

Dell™ Soundbar Problems

Common Symptoms

No Sound

No Sound

Distorted Sound

Distorted Sound

Unbalanced Sound Output

Low Volume

What You Experience

No power to Soundbar - the power indicator is off

Soundbar has power - power indicator is on

Computer's sound card is used as the audio source

Other audio source is used

Sound from only one side of Soundbar

Volume is too low

Possible Solutions

Confirm that the power cable from the Soundbar is plugged into the adapter.

Plug the audio line-in cable into the computer's audio out jack.

Set all Windows volume controls to their maximum.

Play some audio content on the computer (i.e. audio CD, or MP3).

Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.

Clean and reseat the audio line-in plug.

Clear any obstructions between the Soundbar and the user.

Confirm that the audio line-in plug is completely inserted into the jack of the sound card.

Set all Windows volume controls to their midpoints.

Decrease the volume of the audio application.

Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.

Clean and reseat the audio line-in plug.

Troubleshoot the computer's sound card.

Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.

Clear any obstructions between the Soundbar and the user.

Confirm that the audio line-in plug is completely inserted into the jack of the sound card or audio source.

Set all Windows audio balance controls (L-R) to their midpoints.

Clean and reseat the audio line-in plug.

Test the Soundbar using another audio source (i.e. portable CD player).

Clear any obstructions between the Soundbar and the user.

Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.

Set all Windows volume controls to their maximum.

Increase the volume of the audio application.

Back to Contents Page

Back to Contents Page

Appendix

Dell™ P1913/P1913S/P2213 Monitor User's Guide

Safety Instructions

FCC Notice (U.S. Only) and Other Regulatory Information

Contacting Dell

WARNING: Safety Instructions

WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.

For information on safety instructions, see the Product Information Guide .

FCC Notices (U.S. Only) and Other Regulatory Information

For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance .

Contacting Dell

For customers in the United States, call 800-WWW-DELL (800-999-3355).

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Visit support.dell.com

.

2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.

3. Click Contact Us on the left side of the page.

4. Select the appropriate service or support link based on your need.

5. Choose the method of contacting Dell that is convenient for you.

Back to Contents Page

Back to Contents Page

Setting Up Your Monitor

Dell™ P1913/P1913S/P2213 Monitor User's Guide

Setting the display resolution

For maximum display performance with Microsoft

P1913S)/1680 x 1050 (for the P2213)

® Windows ® operating systems, set the display resolution to 1440 x 900 (for the P1913)/1280 x 1024 (for the

In Windows Vista ® or Windows ® 7:

1. Right-click on the desktop and click Personalization .

2. Click Change Display Settings .

3. Move the slider-bar to the right by pressing and holding the left-mouse button and adjust the screen resolution.

4. Click OK .

If you do not see the recommended resolution as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the computer system you are using, and follow the given steps.

1:

If you have a Dell™ desktop or a Dell™ portable computer with internet access.

2:

If you have a non Dell™ desktop, portable computer, or graphics card.

Back to Contents Page

Back to Contents Page

Setting Up Your Monitor

Dell™ P1913/P1913S/P2213 Monitor User's Guide

If you have a Dell™ desktop or a Dell™ portable computer with internet access

1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.

2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1440 x 900 (for the P1913)/1280 x 1024 (for the

P1913S)/1680 x 1050 (for the P2213) again.

NOTE: If you are unable to set the resolution to 1440 x 900/1280 x 1024/1680 x 1050, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions.

Back to Contents Page

Back to Contents Page

Setting Up Your Monitor

Dell™ P1913/P1913S/P2213 Monitor User's Guide

If you have a non Dell™ desktop, portable computer, or graphics card

In Windows Vista ® or Windows ® 7:

1. Right-click on the desktop and click Personalization .

2. Click Change Display Settings .

3. Click Advanced Settings .

4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).

5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).

6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1440 x 900 (for the P1913)/1280 x 1024 (for the P1913S)/1680 x

1050 (for the P2213) again.

NOTE: If you are unable to set the recommended resolution, please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution.

Back to Contents Page

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Business 48.3 cm (19") LED TN+Film
  • HD 1280 x 1024 pixels 5:4
  • 5 ms 250 cd/m² 1000:1
  • 17 W

Related manuals

Download PDF

advertisement