Toyota Tacoma, Corolla, Camry HV, FJ Cruiser, Camry, Prius V, Venza, Avalon HV, Tundra, Prius PHV Owner's manual

Toyota Tacoma, Corolla, Camry HV, FJ Cruiser, Camry, Prius V, Venza, Avalon HV, Tundra, Prius PHV Owner's manual
1. BASIC INFORMATION BEFORE OPERATION
Introduction
CONFIRMING DISPLAY AUDIO MODEL
This manual is made up of 2 sections.
The first describing available functions for models without navigation capabilities (WITHOUT NAVIGATION) such as audio and hands-free.
The second describing available functions for models with navigation capabilities (WITH NAVIGATION) such as navigation, audio, and hands-free.
For models that do not have navigation capabilities, refer to the “WITHOUT
NAVIGATION” section. For models that have navigation capabilities, refer to
the “WITH NAVIGATION” section.
Navigation capabilities
Reference
Not installed
WITHOUT NAVIGATION (1ST SECTION only)
Installed
WITH NAVIGATION (2ND SECTION only)
■EXISTENCE OF NAVIGATION CAPABILITIES
Existence of navigation capabilities can be confirmed by performing the following:
1 When the ignition switch is turned to the “ACC” or “ON” position, the initial
screen will be displayed and the system will begin operating.
2 Press the “APPS” button.
 Either of the following screens will be displayed.
 If your system does not have the “APPS” button, the Display Audio system does not
have navigation capabilities, refer to the “WITHOUT NAVIGATION” section.
i
1. BASIC INFORMATION BEFORE OPERATION
Screen A
Screen B
If screen A is displayed, the Display Audio system does not have navigation capabilities.
If screen B is displayed, the Display Audio system has navigation capabilities.
COMMON ILLUSTRATIONS FOR ALL VEHICLE MODELS
In this manual, illustrations showing the typical Display Audio system layout,
USB port and rear view camera location, etc. has been used. The actual design
and button position may differ depending on the vehicles. For the correct location of these items, please refer to Section 3 and the pictorial index of the “Owner’s Manual”.
ENGINE SWITCH NAMES AND MODES
This manual has been written using a vehicle with a gasoline engine vehicle
(without a smart entry and start system) as an example. For vehicles with a
smart entry and start system and hybrid vehicles, please refer to the following
table to confirm the engine switch name and mode.
Vehicle system
Vehicles without
smart key system
ii
Switch name and mode
a
Engine switch
ACC
ON
OFF (LOCK)
Vehicles with a smart
key system
“ENGINE START
STOP” switch
ACCESSORY
IGNITION
ON
OFF
Hybrid vehicles
“POWER” switch
ACCESSORY
ON
OFF
1. BASIC INFORMATION BEFORE OPERATION
SYMBOLS USED IN ILLUSTRATIONS
Safety symbol
The symbol of a circle with a slash through it means “Do not”, “Do not
do this”, or “Do not let this happen”.
Arrows indicating operations
Indicates the action (pushing, turning, etc.)
used to operate switches and other
devices.
Indicates the outcome of an operation (e.g.
a lid opens).
HOW TO READ THIS MANUAL
No.
Name
Description
Operational Outlines
An outline of the operation is explained.
Main Operations
The steps of an operation are explained.
Related Operations
A main operation’s supplementary operations are described.
Information
Useful information for the user is described.
iii
1. BASIC INFORMATION BEFORE OPERATION
iv
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement