Toyota Camry HV Reference guide

Toyota Camry HV Reference guide
CAMRY HYBRID
2 0 1 7
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
QUICK REFERENCE GUIDE
Printed in U.S.A. 5/16
16-MKG-09466
00505QRG17CAMH
2017
CAMRY HYBRID
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental
operations so you can locate and use the vehicle’s main
equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for
the Owner’s Manual located in your vehicle’s glove box. We
strongly encourage you to review the Owner’s Manual and
supplementary manuals so you will have a better understanding
of your vehicle’s capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales,
U.S.A., Inc. wish you many years of satisfied driving in your new
Camry Hybrid.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Camry Hybrid
operations. Every Camry Hybrid owner should review the Owner’s Manual that
accompanies this vehicle.
Pay special attention to the boxed information highlighted in color throughout
the Owner’s Manual. Each box contains safe operating instructions to help you
avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of printing.
Toyota reserves the right to make changes at any time without notice.
8
7
8
4-5
4
2-3
6
8
7
FEATURES & OPERATIONS
Air conditioning/heating
Audio
Auto lock/unlock1,2
Blind Spot Monitor (BSM)
Bottle holders/Cup holders
Clock
Cruise control
Dynamic Radar Cruise Control (DRCC)
Garage door opener (HomeLink®)3
Hybrid Synergy Drive System
Lane Departure Alert (LDA)
Lights1 & turn signals
Moon roof
Multi-Information Display (MID)1
Parking brake
Power outlets-12V DC
Pre-Collision System (PCS)
Rear view monitor system
Seat adjustments-Front
Seat adjustments-Rear
Seat heaters
Seats-Head restraints
Steering lock release
Steering wheel controls
(Audio & telephone Bluetooth®)
19
21
10
18
20
19
16
17
16
9
24
15
12
23
11
14
23
18
13
13
20
12
10
Tilt and telescopic steering wheel
Transmission
USB/AUX port
Windows - Power
Windshield wipers & washers
Wireless charging
11
10
14
11
14
20
SAFETY & EMERGENCY FEATURES
Door locks
Doors-Child safety locks
Floor mat installation
Safety Connect
Seat belts
Seat belts-Shoulder belt anchor
Spare tire & tools
Star Safety System™
Trunk internal release
25
25
29
26
25
26
27
28-29
27
BLUETOOTH® DEVICE
PAIRING SECTION
30-39
22
1 Visit your Toyota dealer for information on customizing this feature.
2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
3 HomeLink® is a registered trademark of Gentex Corporation.
1
FEATURES/OPERATIONS
Engine maintenance
Fuel tank door release and cap
Hood release
Indicator symbols
Instrument cluster
Instrument panel
Keyless entry1,2
Light control-Instrument panel
Smart Key system1,2
FEATURES & OPERATIONS (continued)
SAFETY AND EMERGENCY FEATURES
OVERVIEW
OVERVIEW
INDEX
OVERVIEW
Instrument panel
Steering wheel
audio controls2
Meter control switches
Telephone controls2
Voice command button2
Dynamic radar cruise control (DRCC)
Vehicle-to-vehicle distance button1
Cruise control
Steering wheel controls
Emergency flasher button
Audio system1/Navigation system1,2
Headlight/turn signal/front
Daytime Running Light (DRL) controls
Wiper and washer controls
“ENGINE START STOP” button
Tilt and telescopic steering lock release lever
Pre-Collision System (PCS) switch1
Lane Departure Alert (LDA) switch1
VSC off switch
Blind Spot Monitor (BSM) main switch1
2
OVERVIEW
Outside rearview mirror/Rear window defogger button
Tire Pressure Monitoring (warning) System (TPMS) reset switch1
Type A
FEATURES/OPERATIONS
Air conditioning controls
Eco drive mode EV drive mode
switch
switch
Seat heater controls1
1 If
2
equipped.
For vehicles with Entune Premium Audio or Entune Audio Plus, refer to the
“Navigation System Owner’s Manual” and “2017 Entune™ Audio Quick
Reference Guide.”
3
SAFETY AND EMERGENCY FEATURES
Type B
OVERVIEW
Instrument cluster
Hybrid System Indicator
Outside temperature display
Speedometer
Fuel gauge
Display change button
Odometer/trip meter display
Engine coolant temperature display
Multi-information display
Instrument panel light control button
Shift position display
Service indicators and reminders
Indicator symbols
For details, refer to “Indicators and warning lights,” Section 2-2, 2017 Owner’s
Manual.
Driver seat belt reminder and/
or front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Brake system warning1
Anti-lock Brake System warning1
Malfunction/
Check Engine indicator1
Brake system warning
Master warning1
READY indicator
1
If indicator does not turn off within a few seconds of starting the Hybrid System, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” Section 4-5, 2017 Owner’s Manual.
4
Lane Departure Alert (LDA) indicator4
Airbag SRS warning1
Pre-Collision System (PCS)
warning light1,4
Slip indicator1
Low Tire Pressure Warning1,4
OVERVIEW
Passenger Air Bag ON/OFF indicator1
Vehicle Stability Control OFF indicator1
Electric power steering system warning1
Headlight low/high beam
indicators
Theft deterrent/ Engine Immobilizer
system indicator
Fuel tank door position
Automatic High Beam indicator4
Low fuel level warning
Turn signal indicator
FEATURES/OPERATIONS
Low outside temperature indicator
EV indicator
EV drive mode indicator
ECO MODE indicator
3
Light flashes in yellow to indicate a malfunction. Light flashes quickly in green to indicate that the
steering lock has not been released.
4 If equipped.
5
SAFETY AND EMERGENCY FEATURES
Cruise control
indicators2,3
OVERVIEW
Keyless entry (and remote entry)
LOCKING OPERATION
Carry remote Type C
Smart key feature
All-door lock
Push
Touch
UNLOCKING OPERATION
Carry remote Type C
Smart key feature
Driver door unlock*
Push
ONCE: Driver door
TWICE: All doors
Grasp
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will
relock for safety.
TRUNK LID
Push
Push and hold
PANIC BUTTON
Push and hold
6
Smart key system
OVERVIEW
START FUNCTION
Carry remote
to start
Depress
brake pedal
Push
NOTE: Gear shift lever must be in Park and brake pedal depressed.
POWER (WITHOUT STARTING HYBRID SYSTEM)
ACCESSORY
Accessories such as the audio will operate.
ON
Power ON; all electrical systems can be used.
All systems OFF; emergency flashers can be used.
Fuel tank door release and cap
Pull up
Store
Turn to open
NOTE: Tighten until one click is heard. If
the cap is not tightened enough, Check
Engine “
” indicator may illuminate.
Close
7
SAFETY AND EMERGENCY FEATURES
OFF
FEATURES/OPERATIONS
Without depressing the brake pedal, pressing the “POWER” button will change
the operation mode in succession from:
OVERVIEW
Hood release
Pull
Pull up latch and raise hood
Engine maintenance
Engine oil level dipstick
Engine oil filler cap
Windshield washer fluid tank
Engine coolant reservoir
NOTE: Regularly scheduled maintenance, including oil changes, will help extend
the life of your vehicle and maintain performance. Please refer to the “Warranty
Maintenance Guide.”
Light control-Instrument panel
Push to control brightness
8
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the vehicle.
To conserve energy, when the brakes are applied the braking force generates
electricity which is then sent to the traction battery. In addition, the engine shuts off
when the vehicle is stopped. The benefits are better fuel economy, reduced vehicle
emissions and improved performance.
OVERVIEW
FEATURES AND OPERATIONS
Hybrid Synergy Drive System
NOTE: Fuel consumption and energy information of the Hybrid System are shown
on the Entune™ Audio system screen or the navigation system.
TIPS FOR IMPROVED FUEL ECONOMY
Ensure tire pressures are maintained at levels specified in the Owner’s Manual.
When possible, link trips to reduce engine cold starts.
Avoid driving at speeds that are higher than necessary, especially on the highway.
When possible, avoid sudden stops to maximize regenerative braking energy.
Minimize use of the air conditioning.
FEATURES/OPERATIONS
STARTING YOUR VEHICLE
1. Put the selector lever in “P.”
2. Depress the brake pedal, and “
” will be displayed on the Multi-Information
Display (MID).
3. Press the “POWER” switch briefly and firmly.
4. The “READY” light will blink. After a few seconds, when the light remains steady
and a beep sounds, you may begin driving.
9
SAFETY AND EMERGENCY FEATURES
-
FEATURES AND OPERATIONS
Auto lock/unlock
Automatic door locks can be programmed to operate in two different modes, or
turned OFF.
-
Doors lock when shifting from Park.
Doors lock when the vehicle speed is approximately 12 mph or higher.
Doors unlock when shifting into Park.
Doors unlock when the driver’s door is opened within 10 seconds after turning the
“POWER” switch OFF.
Refer to the Owner’s Manual for more details.
Transmission
Park1
Reverse
Neutral
B
Drive
Engine braking2
The “POWER” switch must be set at “ON” and the brake pedal depressed to shift
from Park.
2 The engine brake is the equivalent of downshifting. Shift to “B” when engine
braking is desired (i.e. downhill driving, coasting to a stop, etc.).
1
Steering lock release
Turn
Push
10
Tilt and telescopic steering wheel
Length
OVERVIEW
Angle
Lock release lever
Hold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
FEATURES/OPERATIONS
Parking brake
Set: Depress
Release: Depress again
Windows - Power
Driver side
Down
Automatic operation Push the switch completely down or pull it completely up and
release to fully open or close. To stop the window partway, operate the switch in
the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
11
SAFETY AND EMERGENCY FEATURES
Window lock switch
Up
FEATURES AND OPERATIONS
Moon roof (if equipped)
SLIDING OPERATION
Push once to open partway; again to open completely.
Close
Open
Recommended driving position
to minimize wind noise.
TILTING OPERATION
Tilt
Close
Push once to open; moon roof will automatically stop at the recommended position.
Push again to open completely.
Seats - Head restraints
Lock release button
12
Seat adjustments - Front
OVERVIEW
MANUAL SEAT
Height crank (driver side only)
Seatback angle
Seat position (forward/backward)
POWER SEAT (IF EQUIPPED)
Seatback angle
Lumbar support
(driver side only)
Seat cushion angle
Height crank (driver side only)
FEATURES/OPERATIONS
Seat position (forward/backward)
Seat adjustments-Rear
(1)
SAFETY AND EMERGENCY FEATURES
Pull
(2)
Tip: To fold rear seats, the
release button is located in the
trunk.
Fold down
Refer to the Owner’s Manual for more details.
13
FEATURES AND OPERATIONS
Windshield wipers & washers
Mist
Adjust frequency*
Interval wipe
Slow
Pull to wash and wipe
Fast
* Intermittent windshield wiper frequency adjustment Rotate to increase/decrease
wipe frequency.
Power outlets-12V DC
Front console
Center console
The “POWER” switch/ignition switch must be set at “ACCESSORY” or “ON” position
for use.
USB/AUX port
Open lid
By connecting a USB-compatible portable audio device or USB memory to the
USB port, you can listen to music from the portable audio device or USB memory
through the vehicle’s speaker system.
By inserting a mini plug into the AUX port, you can listen to music from a portable
audio device through the vehicle’s speaker system while in AUX mode.
14
Lights & turn signals
OVERVIEW
HEADLIGHTS
Headlights
Parking lights
DRL OFF
Low beam
High beam
flasher
-Daytime Running Light system (DRL) Automatically turns on the headlights at a
reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30-second
delay, or lock switch on remote may be pushed after locking.
FEATURES/OPERATIONS
High beam
TURN SIGNALS
Right turn
Lane change1
Left turn
1
2
The right hand signals will flash three times.
The left hand signals will flash three times.
15
SAFETY AND EMERGENCY FEATURES
Lane change2
3-5. Other interior features
FEATURES AND OPERATIONS
Garage door opener (HomeLink®*)(if equipped)
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 6-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink® is a registered trademark of Johnson Controls, Inc.
Cruise control
TURNING SYSTEM ON/OFF
Indicator
System ON/OFF
FUNCTIONS
Resume2/Increase speed
Cancel1
Set/Decrease speed
1
2
The set speed may also be cancelled by depressing the brake pedal.
The set speed may be resumed once vehicle speed exceeds 25 mph.
16
Refer to the Owner’s Manual for more details and complete safety precautions
before attempting to use “Dynamic Radar Cruise Control.”
FIXED SPEED MODE
(2) Push and hold
OVERVIEW
Dynamic Radar Cruise Control (DRCC)(if equipped)
Indicator
(1) Push
System ON/OFF
To set, cancel and resume a speed Refer to “Summary of Functions” in the Cruise
Control section, and to the Owner’s Manual for more details.
DISTANCE CONTROL MODE
Indicator
Push
System ON/OFF
Preceding vehicle mark
The distance control mode will cruise at a set speed, decelerate to maintain a
selected distance from a slower vehicle traveling in front of you, and accelerate
back up to the selected speed if the vehicle in front changes lanes or speeds up.
FEATURES/OPERATIONS
Preceding
vehicle mark
To set, cancel and resume a speed Refer to “Summary of Functions” in the Cruise
Control section, and your Owner’s Manual for more details.
NOTE: Once vehicle speed is set, pushing lever up toward “+ RES” will
increase speed to the nearest 5 mph, and then in 5 mph increments. Pushing
lever down toward “- SET” will reduce speed in the same way.
Preceding vehicle mark
MIDDLE
LONG
SHORT
Push
To change the vehicle-to-vehicle distance
Push the distance button to cycle through the settings, which will change
progressively from LONG to MIDDLE to SHORT.
17
SAFETY AND EMERGENCY FEATURES
VEHCLE-TO-VEHICLE DISTANCE
FEATURES AND OPERATIONS
Blind Spot Monitor (BSM) (if equipped)
Rear Cross Traffic Alert buzzer
System ON/OFF
The Blind Spot Monitor is a system that has two functions:
- The Blind Spot Monitor function (assists the driver in decision-making when
changing lanes)
- The Rear Cross Traffic Alert function (assists the driver when backing up)
The Blind Spot Monitor function uses radar sensors to detect vehicles that are
traveling in an adjacent lane in the area that is not reflected in the outside rear
view mirror (the blind spot), and advises the driver of the vehicles existence via the
outside rear view mirror indicator.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper
of the rear area of the vehicle. The camera for the rear view monitor system is
located above the license plate.
To adjust the image on the rear view monitor screen, press the “SETUP” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the
screen contrast and brightness.
Refer to the Owner‘s Manual for limitations and more details on this system.
18
OVERVIEW
Clock
To find your system, refer to Audio section of this guide.
For Entune™ Audio
Push “SETUP” button next to the screen
then select “General” in the touch screen to access clock setting.
For Entune™ Audio Plus and Entune™ Premium Audio
Push “APPS” button next to the screen
then select “General” in the touch screen to access clock setting.
Automatic Air Conditioning
“SYNC” button - Indicator ON: Synchronized
temperature settings for driver and passengers. Indicator OFF: Separate temperature
settings for driver and passengers.
Airflow mode display
Automatic climate control ON - Adjusting the
temperature setting will cause the airflow vents, air
intake and fan to adjust automatically.
Air Conditioning
ON/OFF
Climate control OFF
Outside rearview mirror/
Rear defogger
Recirculate cabin air
(outside air when OFF)
Fan speed
Airflow vent mode - In “
” or “
”
mode, use outside air (“
” indicator
OFF) to reduce window fogging.
19
SAFETY AND EMERGENCY FEATURES
Temperature selector
(passenger side)
Temperature selector
(driver side)
Windshield airflow/
defogger
FEATURES/OPERATIONS
Air conditioning/heating
FEATURES AND OPERATIONS
Seat heaters (if equipped)
Driver seat
Front passenger seat
Bottle holders/Cup holders
Front
Rear
Wireless Charging (if equipped)
Push
A mobile device can be charged wirelessly on the tray. Open the lid and press
the wireless charger switch. Place a mobile device on the tray as shown in the
illustration. An amber indicator is illuminated while charging is in progress. When
charging is complete, a green indicator will also be illuminated. Some phones,
cases or cover type wireless chargers may not cause the green indicator to
illuminate even though it is fully charged.
Refer to the Owner‘s Manual for more details on this system before attempting to
use it.
20
Audio (if equipped)
Eject CD
Touch screen display
Push to turn
ON/OFF
AUDIO Button
Push to display
audio screen
or access audio
functions.
Turn to tune radio
stations manually or
select tracks or files
OVERVIEW
Entune™ Audio
Seek station/
CD track select
Push to display
telephone option
screen
Entune™ Audio Plus With Connected Navigation App (JBL® Audio)
FEATURES/OPERATIONS
AUDIO Button
Push to display
audio screen
or access audio
functions.
APPS Button
Access to traffic
and weather
HOME Button
Access to Home
screen.
HOME SCREEN - The home screen offers a two and three panel layout. Information and layout will vary
depending on selected set up.
Entune™ Premium (JBL®) Audio with Integrated Navigation and App Suite
APPS Button
Access to traffic
and weather
Map card
insert1
HOME Button
Access to navigation
system1 and Home
screen.
HOME SCREEN - The home screen offers a two and three panel layout. Information and layout will vary
depending on selected set up.
NOTE: Concentrating on the road should always be your first priority while driving. Do not
use the Entune system if it will distract you.
1 Refer to the “Navigation System Owner’s Manual” and “2017 Entune™ Audio Quick Reference
Guide.”
21
SAFETY AND EMERGENCY FEATURES
AUDIO Button
Push to display
audio screen
or access audio
functions.
FEATURES AND OPERATIONS
Steering wheel controls
(Audio & telephone: Bluetooth®)
Start call
End call
“
” Use to search within the
selected audio medium (radio, CD, etc.).
Volume
“MODE” Push to turn
audio ON and select an
audio mode. Push and
hold to turn the audio
OFF.
Return to
previous screen
Select /enter
Microphone
Bluetooth® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the compatible telephone and the
system.
Refer to “Connecting Bluetooth®” and “Using a Bluetooth® Phone,” Section
5-7,9 in the Owner’s Manual, for more information about phone connections and
compatibility.
Refer to “Bluetooth® Device Pairing Section” at the end of this booklet, to connect
your smart phone to the Entune™ touch screen system.
NOTE: Concentrating on the road should always be your first priority while driving. Do not
use the hands-free phone system if it will distract you.
22
* If equipped
Pre-Collision System (PCS) (if equipped)
When a high possibility of a frontal collision is detected by the radar sensor, a
buzzer sounds and a message urging the driver to take evasive action appears
on the Multi-Information Display (MID). If the driver then applies brakes, the
system applies greater brake force in relation to how strongly the brake pedal is
depressed. If the system determines that a collision is unavoidable, the brakes are
automatically applied to reduce the collision speed.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
23
SAFETY AND EMERGENCY FEATURES
Push “meter control switches” to change information in the following:
(1) Drive information
(2) Navigation system linked display
(3) Audio system linked display
(4) Dynamic Radar Cruise Control (DRCC)*
(5) Lane Departure Alert (LDA) status*
(6) Warning messages
(7) Settings display
(8) Tire Pressure Monitoring (warning) System (TPMS)*
FEATURES/OPERATIONS
OVERVIEW
Multi-Information Display (MID)
FEATURES AND OPERATIONS
Lane Departure Alert (LDA)(if equipped)
The Lane Departure Alert recognizes the visible lane markers using a camera as a
sensor and alerts the driver with beeping and flashing indicators when the vehicle
deviates from its lane. Press the LDA switch to activate the system.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
24
Unlock
OVERVIEW
SAFETY AND EMERGENCY FEATURES
Door locks
Lock
Doors - Child safety locks
Rear door
Unlock
FEATURES/OPERATIONS
Lock
Moving the lever downward will allow the door to be opened only from the outside.
Seat belts
Take up slack
Keep as low on hips
as possible
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic Locking Retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
25
SAFETY AND EMERGENCY FEATURES
Too high
SAFETY AND EMERGENCY FEATURES
Seat belts - Shoulder belt anchor
Push up, or squeeze
lock release to lower
Safety Connect (if equipped)
LED Indicators
Microphone
“SOS” button
Safety Connect is a subscription-based telematics service that uses Global
Positioning System (GPS) data and embedded cellular technology to provide safety
and security features to subscribers. Safety Connect is supported by Toyota’s
designated response center, which operates 24 hours per day, 7 days per week.
Services for subscribers include: Automatic collision notification, Stolen vehicle
location, Emergency assistance button and Enhanced roadside assistance
Contact your dealer for more information about Safety Connect.
26
Spare tire & tools
OVERVIEW
TOOL LOCATION
Luggage floor cover
Jack
Wheel nut wrench
Jack handle
REMOVING THE SPARE TIRE
(1) Remove the tool tray.
(2) Loosen the center fastener that
secures the spare tire.
FEATURES/OPERATIONS
Spare tire
Trunk-Internal release
Pull up
27
SAFETY AND EMERGENCY FEATURES
Refer to the Owner’s Manual for tire changing and jack positioning procedures.
SAFETY AND EMERGENCY FEATURES
Star Safety System™
All new Toyota vehicles come standard with the Star Safety SystemTM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), Anti-lock Braking
System (ABS), Electronic Brake-force Distribution (EBD), Brake Assist (BA) and Smart
Stop Technology (SST).
Refer to the Owner’s Manual for more details and important information on limitations
to these systems.
ENHANCED VEHICLE STABILITY CONTROL (VSC)
Enhanced Vehicle Stability Control provides cooperative control of the ABS, TRAC,
VSC and EPS.
Enhanced VSC helps to maintain directional stability when loss of traction occurs
during a turn.
TRACTION CONTROL (TRAC)
VSC helps prevent loss of traction during cornering by reducing Hybrid System
output, and Traction Control helps maintain traction on loose gravel and wet, icy, or
uneven surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits Hybrid System output and applies the brakes to the spinning wheel.
This transfers power to the wheels that still have traction to help keep you on track.
ANTI-LOCK BRAKE SYSTEM (ABS)
ABS helps prevent brakes from locking up by “pulsing” brake pressure to each
wheel. This limits brake lockup and helps provide directional control for the current
road conditions.
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. Abrupt stops can cause a vehicle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to sudden
stops by redistributing brake force to enhance the braking effectiveness of all four
wheels.
BRAKE ASSIST (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
28
Smart Stop Technology automatically reduces driving torque when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
Floor mat installation
OVERVIEW
SMART STOP TECHNOLOGY (SST)
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
Always align the ∆ marks
FEATURES/OPERATIONS
•
Only use Toyota floor mats designed for your specific model.
Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
Install floor mats right side up.
SAFETY AND EMERGENCY FEATURES
•
•
29
BLUETOOTH® DEVICE PAIRING
SECTION
Do not attempt the Bluetooth® Pairing process while driving.
30
To begin the Bluetooth® Pairing process, press the HOME button on the faceplate of
your Toyota Vehicle Entune™ Multimedia Head Unit.1
Bluetooth® Pairing for Android phone and
Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Android mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.2
Initiate Bluetooth® on your Android®
STEP 1
From your APPS
SCREEN, select
SETTINGS.
STEP 2
STEP 3
Select
CONNECTIONS and
select BLUETOOTH.
Ensure
BLUETOOTH
is ON.
STEP 5
STEP 4
Select YOUR PHONE
DEVICE to make it
discoverable.
Phone will seek out
Bluetooth devices
while remaining
discoverable.
While your Android device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
1
To determine which head unit is installed in your vehicle, refer to the Audio section in this guide.
Entune™ Premium Audio screens are shown in this section. Screens and features may vary by
Entune™ system.
2 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of device and Android OS version.
31
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need to
initiate Bluetooth on your Entune head unit. Please follow the instructions below to
pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle Entune
Multimedia Head Unit, Select
SETUP BUTTON on the Home
Screen.
STEP 7
Select BLUETOOTH.
Image shown is a sample
image, features may vary.
STEP 8
Select ADD, to add your
phone device.
For Entune™ Audio System,
press the SETUP BUTTON
on the faceplate to access the
Setup Screen.
STEP 9
STEP 10
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
Your smartphone is now
paired with Entune.
STEP 11
You may need to enter the
provided Bluetooth PIN on
your phone.
32
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
STEP 12
Using your smartphone, you will
need to allow Entune access to
your messaging and contacts.
It is recommended to check the
“Don’t ask again” box, so as not
to have to press OK every time the
phone makes a Bluetooth connection with your Toyota.
STEP 13
A confirmation will appear once your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get more information
from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia
software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free
phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired.
Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google Inc.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large
amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/
entune for details.
33
BLUETOOTH® DEVICE PAIRING
Bluetooth® Pairing for iPhone and
Entune™ touch screen system
**Do not attempt the Bluetooth® Pairing process while driving.**
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all iPhone mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.
Initiate Bluetooth® on your iPhone®
STEP 1
From the HOME
SCREEN, select
SETTINGS.
STEP 2
Select BLUETOOTH.
STEP 3
Ensure
BLUETOOTH
is ON.
STEP 4
Your iPhone will seek
out Bluetooth devices
while remaining
discoverable.
STEP 5
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
34
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need to
initiate Bluetooth on your Entune head unit. Please follow the instructions below to
pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle Entune
Multimedia Head Unit, Select
SETUP BUTTON on the Home
Screen.
STEP 7
Select BLUETOOTH.
Image shown is a sample
image, features may vary.
STEP 8
Select ADD, to add your
phone device.
For Entune™ Audio System,
press the SETUP BUTTON
on the faceplate to access the
Setup Screen.
STEP 9
STEP 10
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
Your smartphone is now
paired with Entune.
STEP 11
You may need to enter the
provided Bluetooth PIN on
your phone.
35
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH® DEVICE PAIRING
STEP 12
STEP 13
Using your smartphone, you may need to
allow Entune access to your messaging
and contacts.
A confirmation will appear once your phone
has been paired and
connected.
Only current iPhone text messages can
be viewed on the head unit. iPhone does
not allow text message reply.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get more information
from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia
software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free
phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired.
Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google Inc.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large
amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/
entune for details.
36
Bluetooth® Pairing for Windows Phone and
Entune™ touch screen system
**Do not attempt the Bluetooth® Pairing process while driving.**
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Windows Phone mobile digital devices have Bluetooth integrated; all you
have to do is setup the phone and multimedia system to “talk” to each other and
form a connection.
Initiate Bluetooth® on your Windows Phone®
STEP 1
From your APP LIST,
select SETTINGS.
STEP 2
Select BLUETOOTH.
STEP 3
Ensure
BLUETOOTH
is ON.
STEP 4
Phone will seek out
Bluetooth devices
while remaining
discoverable.
STEP 5
While your iPhone device is seeking
out Bluetooth devices, proceed to your
Entune Multimedia Head Unit on your
Toyota vehicle.
37
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth® enabled on your phone and ready to pair, you will need
to initiate Bluetooth® on your Entune head unit. Please follow the instructions below
to pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle Entune
Multimedia Head Unit, Select
SETUP BUTTON on the Home
Screen.
STEP 7
Select BLUETOOTH.
Image shown is a sample
image, features may vary.
STEP 8
Select ADD, to add your
phone device.
For Entune™ Audio System,
press the SETUP BUTTON
on the faceplate to access the
Setup Screen.
STEP 9
STEP 10
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
Your smartphone is now
paired with Entune.
STEP 11
You may need to enter the
provided Bluetooth PIN on
your phone.
38
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
STEP 12
Using your smartphone,
you may need to allow
Entune access to your
contacts.
STEP 13
A confirmation will appear that your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get more information
from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia
software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free
phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired.
Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google Inc.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large
amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/
entune for details.
39
NOTES
40
NOTES
41
CAMRY HYBRID
2 0 1 7
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
QUICK REFERENCE GUIDE
Printed in U.S.A. 5/16
16-MKG-09466
00505QRG17CAMH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement