Toyota RAV4 Reference guide

Toyota RAV4 Reference guide
RAV4
2 0 1 3
QUICK REFERENCE GUIDE
2013
RAV4
This Quick Reference Guide is a summary of basic vehicle operations.
It contains brief descriptions of fundamental operations so you can
locate and use the vehicle’s main equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for the
Owner’s Manual located in the vehicle’s glove box. We strongly
encourage you to review the Owner’s Manual and supplementary
manuals so you will have a better understanding of the vehicle’s
capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales, U.S.A.,
Inc. wish you many years of satisfied driving in your new RAV4.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of RAV4
operations. Every RAV4 owner should review the Owner’s Manual
that accompanies this vehicle.
Pay special attention to the boxed information highlighted in
color throughout the Owner’s Manual. Each box contains safe
operating instructions to help you avoid injury or equipment
malfunction.
All information in this Quick Reference Guide is current at the
time of printing. Toyota reserves the right to make changes at
any time without notice.
INDEX
OVERVIEW
9
8
8
4-5
4
2-3
6
7
FEATURES/OPERATIONS Active torque control AWD (AWD models)
SAFETY AND
EMERGENCY FEATURES
* Visit your Toyota dealer for information on customizing this feature.
1
27
29
26
27
27
28-29
26
SAFETY AND EMERGENCY FEATURES
Doors-Child safety locks
Floor mat installation
Seat belts
Seat belts-Shoulder belt anchor
Spare tire & tools
Star Safety SystemTM
Tire Pressure Monitoring (warning) System
FEATURES/OPERATIONS
11
Air Conditioning/Heating
18-19
Audio
20-21
Auto lock/unlock*
10
Automatic Transmission
10
Bottle holders
25
Blind Spot Monitor (BSM) with Rear Cross Traffic Alert 24
Clock
19
Cruise control
23
Cup holders
25
Door locks
16
Door-Power back
14
Light control-Instrument panel
19
Lights & turn signals
13
Moonroof
16
Parking brake
11
Power outlets-12V DC
22
Seat adjustments-Front
12
Seat adjustments-Rear
12
Seat heaters
18
Seats-Head restraints
11
Telephone controls (Bluetooth®)
17
Tilt and telescopic steering wheel
17
VSC OFF button
22
Windows-Power
15
Windshield wipers & washers
15
OVERVIEW
Engine maintenance
Fuel tank door release and cap
Hood release
Indicator symbols
Instrument cluster
Instrument panel
Keyless entry*
Smart Key system*
OVERVIEW
Instrument panel
Steering wheel controls
Display Audio system
Steering wheel audio controls2
Telephone controls2
Voice command button1,2
Multi-Information Display switch2
Cruise control
Ignition switch (standard key)1
Tilt and telescopic steering release
Headlight, turn signal and fog light1 control
Wiper and washer controls
“ENGINE START STOP” button (Smart Key)1
Emergency flasher switch
Intuitive parking assist switch1
Clock
Engine immobilizer indicator
Front passenger occupant classification indicator
Display Audio system2
Air Conditioning controls
Rear window and outside rearview mirror defogger switch
2
OVERVIEW
With manual
Air Conditioning system
With automatic
Air Conditioning system
FEATURES/OPERATIONS
1
2
If equipped
For details, refer to the “Display Audio System Owner’s Manual.”
3
SAFETY AND EMERGENCY FEATURES
Power back door main switch1
12V DC power outlet
USB/AUX port2
Seat heater switches1
Driving mode select switches
Tire pressure warning reset switch
Fuel filler door opener
Hood lock release lever
Power back door switch1
All-Wheel Drive lock switch (AWD models)
BSM (Blind Spot Monitor with Rear Cross Traffic Alert) main switch1
VSC OFF switch
Instrument panel light control
Outside rear view mirror switches
OVERVIEW
Instrument cluster
Tachometer
Service indicator and reminder
Speedometer
Fuel gauge
Automatic Transmission shift position/shift range indicator
Multi-Information Display
Indicator symbols
Brake system warning1
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Charging system warning1
Low engine oil pressure warning1
Malfunction/Check Engine indicator1
Low fuel level warning
Engine oil replacement reminder1
Open door warning
Airbag warning1
Automatic Transmission fluid temperature warning1
Low Tire Pressure Warning1
Dynamic Torque Control AWD system warning light1
1
2
3
If indicator does not turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
For details, refer to “All-wheel drive lock switch,” Section 4-5, 2013 Owner’s Manual.
The indicator flashes to indicate that the system is operating.
4
Electric power steering system warning1
Front passenger occupant classification indicator
OVERVIEW
Low windshield washer fluid level warning1
Headlight high beam indicator
Turn signal indicator
Fog light indicator
All-Wheel Drive lock indicator1,2
Vehicle Stability Control (VSC) OFF indicator1
Slip indicator1,3
AUTO Limited Slip Differential indicator1
Cruise control indicator4/Cruise control SET indicator4
Smart Key system indicator5
Traction Control OFF indicator1
Blind Spot Monitor warning1/Blind Spot Monitor outside
rearview mirror indicators
FEATURES/OPERATIONS
Anti-lock Brake System warning1
Theft deterrent/Engine immobilizer system indicator
Eco Driving Indicator Light
ECO mode indicator
High coolant temperature warning1
SPORT indicator
4
5
6
If this light flashes, refer to “Cruise control,” Section 4-5, 2013 Owner’s Manual.
Light flashes in yellow to indicate a malfunction. Light flashes quickly in green to indicate that
the steering lock has not been released.
The indicator flashes to indicate a malfunction.
5
SAFETY AND EMERGENCY FEATURES
Intuitive parking assist indicator6
OVERVIEW
Keyless entry
Beep sound can be switched ON or OFF. Refer to the Owner’s Manual for more
details.
Locking
Without Smart Key system
With Smart Key system
Push
Unlocking
Without Smart Key system
With Smart Key system
Push ONCE: Driver door
TWICE: All doors
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for
safety.
Power back door (if equipped)
Without Smart Key system
With Smart Key system
Push and hold
Panic button
Push and hold
6
Smart Key system (if equipped)
Start function
Carrying
Depress
brake pedal
OVERVIEW
Green indicator ON
Push
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Power (without starting engine)
Without depressing the brake pedal, pressing the “ENGINE START STOP” switch
will change the operation mode in succession from:
ACCESSORY Accessories such as the radio will operate.
OFF
FEATURES/OPERATIONS
ON
Power ON; the engine not running.
All systems OFF.
Locking operation
Unlocking operation
Front door unlock*
Front door lock
Grasp
Touch
Carry remote to lock
Carry remote to unlock
Back door lock/unlock
Carry remote
to lock/unlock
Push to unlock
* Driver door unlocking function can be programmed to unlock driver door only, or
all doors. Grasping passenger door handle will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
7
SAFETY AND EMERGENCY FEATURES
Push to
lock
OVERVIEW
Fuel tank door release and cap
Driver seat
Turn to open
Pull up
Store
NOTE: Tighten until one click is heard. If the cap is not tightened enough, Check
Engine “ ” indicator may illuminate.
Hood release
Pull up latch
and raise hood
Pull
Engage support rod
8
Engine maintenance
OVERVIEW
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer
to the “Warranty Maintenance Guide.”
FEATURES/OPERATIONS
Engine coolant reservoir
Engine oil filler cap
Engine oil level dipstick
Windshield and back window washer fluid tank
SAFETY AND EMERGENCY FEATURES
9
FEATURES/OPERATIONS
Auto lock/unlock
Automatic door locks can be programmed to operate in four different modes, or
turned OFF.
-Doors lock when shifting from Park.
-Doors lock when the vehicle speed goes above approximately 12 mph.
-Doors unlock when shifting into Park.
Vehicles without Smart Key system
-Doors unlock when the ignition switch is set from “ON” to “ACC” or “LOCK” and
driver’s door is opened.
Vehicles with Smart Key system
-Doors unlock when the “ENGINE START STOP” switch is set to OFF and driver’s
door is opened.
Refer to the Owner’s Manual for more details.
Automatic Transmission
P
R
N
D
Park*
Reverse
Neutral
Drive
“S” mode
* The ignition/“ENGINE START STOP” switch must be “ON” and the brake pedal
depressed to shift from Park.
“S” (Sequential) mode
Shift the shift lever to “S” position from “D” position.
+: Upshift (push and release)
-: Downshift (pull and release)
Downshifting increases power going uphill, or provides engine braking downhill.
For best fuel economy during normal driving conditions, always drive with the shift
lever in the “D” position.
10
Parking brake
Set
Release
(1) Pull slightly
OVERVIEW
(2) Push
Pull
(3) Lower
Active
torque
control AWD
Auto lock
functions
(AWD models)
All-wheel drive lock switch
FEATURES/OPERATIONS
Push the switch to ensure that the engine torque is applied to the four wheels.
NOTE: Should ONLY be used when wheel spinning occurs on loose or unpaved
surfaces.
Refer to the Owner’s Manual for more details.
Seats-Head restraints
Rear seats
Front seats
11
SAFETY AND EMERGENCY FEATURES
Lock release button
Lock release button
FEATURES/OPERATIONS
Seat adjustments-Front
Power seat (driver side only)
Manual seat
Seat position (forward/backward)
Height crank (driver side only)
Seatback angle
Seat position, cushion angle and height
Seatback angle
Lumbar support
Seat adjustments-Rear
Lean back
Pull up
12
Lights & turn signals
Headlights
Type B
Headlights
Headlights
Parking lights
Parking lights
OVERVIEW
Type A
DRL ON
Auto
DRL OFF
DRL OFF
Low beam
High beam flasher
High beam
FEATURES/OPERATIONS
-Daytime Running Light system (DRL)
Automatically turns on the headlights at a reduced intensity.
-Automatic light cut off system
Will automatically turn lights off after a delay of 30 seconds.
Turn signals
Right turn
Lane change
Lane change
Left turn
Turn
Front fog lights come on only when the headlights are on low beam.
13
SAFETY AND EMERGENCY FEATURES
Fog lights (if equipped)
FEATURES/OPERATIONS
Door-Power back (if equipped)
Instrument panel
Push and hold
Open: Push and hold
Close: Push and hold again
Back door (close only)
Push
Back door (open and close)
Push
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
Refer to the Owner’s Manual for more details.
14
Windshield wipers & washers
Front
OVERVIEW
Single wipe
Adjust frequency*
Interval wipe
Slow
Fast
Pull to wash and wipe
* Intermittent windshield wiper frequency adjustment Rotate to increase/
decrease wipe frequency.
Rear
Wipe
Interval wipe
FEATURES/OPERATIONS
Wash and wipe
Windows-Power
Driver side
Window lock switch
Up
Down
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
15
SAFETY AND EMERGENCY FEATURES
Automatic operation (driver side only) Push the switch completely down or pull
it completely up and release to fully open or close. To stop the window partway,
operate the switch in the opposite direction.
FEATURES/OPERATIONS
Moonroof (if equipped)
Sliding operation
Push once to open
partway; again to
open completely.
Recommended open
position to minimize
wind noise
Open
Close
Tilting operation
Tilt
Close
NOTE: If battery is disconnected, the moonroof needs to be reinitialized. Refer to
the Owner’s Manual for more details.
Door locks
Unlock
Lock
16
Telephone controls (Bluetooth®)
Audio unit
Microphone
OVERVIEW
Start call
End call
Steering wheel telephone switches
Start call
Voice command
button (if equipped)
Volume
End call
FEATURES/OPERATIONS
Bluetooth® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the compatible telephone and the
system.
Refer to “Bluetooth® audio/phone,” Section 5-2 in the Owner’s Manual, for more
information about phone connections and compatibility.
Tilt and telescopic steering wheel
Lock release lever
Angle
NOTE: Do not attempt to adjust while the vehicle is in motion.
17
SAFETY AND EMERGENCY FEATURES
Hold wheel, push lever down, set angle and length, and return lever.
Length
FEATURES/OPERATIONS
Seat heaters (if equipped)
Driver seat
Front passenger seat
Air Conditioning/Heating
Automatic Air Conditioning
Temperature selector (driver side)
Automatic climate control ON
Adjust the temperature setting, and airflow vents and fan will adjust
automatically.
Micro dust and pollen filter ON/OFF
Windshield defogger
Synchronizes driver, front passenger and rear temperature settings
Temperature selector (front passenger side)
Air Conditioning ON/OFF
Rear defogger
Airflow vent
In “
” or “ ” mode, use fresh air (“
” indicator OFF) to reduce
window fogging.
Fan speed
Recirculate cabin air (fresh air when OFF)
Climate control OFF
18
Manual Air Conditioning
OVERVIEW
Clock
FEATURES/OPERATIONS
Airflow vent
In “
” mode, use fresh air (“
” indicator OFF) to reduce window
fogging. “ ” mode uses fresh air only.
Fan speed
Temperature selector
Air Conditioning ON/OFF
Select for maximum cooling.
Rear defogger
Recirculate cabin air (fresh air when OFF)
H- Hour set
M- Minute set
Light control-Instrument panel
With the dial turned fully up, instrument panel lights will not dim when the
headlights are turned ON.
19
SAFETY AND EMERGENCY FEATURES
+
Brightness
control
FEATURES/OPERATIONS
Audio*1
Eject CD
Touch screen display
Turn to tune
radio stations
manually or
select tracks
or files
Push to turn
ON/OFF
Push to
display audio
screen
*2
Seek station/
CD track
select
*3
*1 Refer to the “Display Audio System Owner’s Manual” for instructions and more
information.
*2 Display Audio system
*3 Premium Display Audio system
Steering wheel switches
Volume
control
>
>
“
”
Use to search within the selected audio medium (radio, CD, iPod®, etc.).
“MODE”
Push to turn audio ON and select an audio mode. Push and hold to turn the
audio OFF.
20
iPod®/USB/AUX port
OVERVIEW
iPod®/USB port
By connecting a USB-compatible portable audio device or USB memory to the
USB port, you can listen to music from the portable audio device or USB memory
through the vehicle’s speaker system.
AUX port
By inserting a mini plug into the AUX port, you can listen to music from a portable
audio device through the vehicle’s speaker system while in AUX mode.
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
21
FEATURES/OPERATIONS
Power outlets-12V DC
NOTE: Designed for car accessories. Ignition switch/“ENGINE START STOP” switch
must be in the “ACC” or “ON” position to be used.
VSC OFF button
VSC OFF button
The VSC OFF button is used to switch between modes related to the TRAC, VSC
and Auto LSD functions (2WD models.)
Refer to Section 4-5 of the Owner’s Manual for more information.
22
Cruise control
Turning system ON/OFF
OVERVIEW
System ON/OFF
Functions
Resume2/Increase speed
Set/Decrease speed
1
2
FEATURES/OPERATIONS
Cancel1
The set speed may also be cancelled by depressing the brake pedal.
The set speed may be resumed once vehicle speed exceeds 25 mph.
Refer to the Owner’s Manual for more details.
SAFETY AND EMERGENCY FEATURES
23
FEATURES/OPERATIONS
Blind Spot Monitor (BSM) with Rear
Cross Traffic Alert (if equipped)
Indicator
System ON/OFF
Indicator
Buzzer
The Blind Spot Monitor is a system that has two functions:
‡7KH%OLQG6SRW0RQLWRUIXQFWLRQ DVVLVWVWKHGULYHULQGHFLVLRQPDNLQJZKHQ
FKDQJLQJODQHV
‡7KH5HDU&URVV7UDIILF$OHUWIXQFWLRQ DVVLVWVWKHGULYHUZKHQEDFNLQJXS 7KHV\VWHPXVHVUDGDUVHQVRUVWRGHWHFWYHKLFOHVWKDWDUHWUDYHOLQJLQWKHDUHD
WKDWLVQRWUHIOHFWHGLQWKHRXWVLGHUHDUYLHZPLUURU WKHEOLQGVSRW DQGDGYLVHV
WKHGULYHURIWKHYHKLFOHV·H[LVWHQFHYLDWKHRXWVLGHUHDUYLHZPLUURULQGLFDWRU
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
24
Cup holders
Front
OVERVIEW
Rear
FEATURES/OPERATIONS
Bottle holders
Rear door
Front door
SAFETY AND EMERGENCY FEATURES
25
SAFETY AND EMERGENCY FEATURES
Seat belts
Take up slack
Too high
Keep as low on
hips as possible
If belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
Tire Pressure Monitoring (warning)
System
System reset initialization
1. Push and hold “ SET” button
until the indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete.
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the ignition switch to “ON” and press and hold the “ SET” button until indicator
blinks three times. Let the vehicle sit for a few minutes to allow initialization to
complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains
on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.
26
Doors-Child safety locks
Rear door
OVERVIEW
Moving the lever to “LOCK” will allow the door to be opened only from the outside.
Seat belts-Shoulder belt anchor
Push up or squeeze lock
release to lower
Down
Up
Tool location
Jack
Spare tire
FEATURES/OPERATIONS
Spare tire & tools
Tool bag
Removing the spare tire
(2)
(1) Remove the tool tray.
(2) Lessen the center fastener that secures the spare tire.
Refer to the Owner’s Manual for tire changing and jack positioning procedures.
27
SAFETY AND EMERGENCY FEATURES
(1)
SAFETY AND EMERGENCY FEATURES
Star Safety SystemTM
All new Toyota vehicles come standard with the Star Safety SystemTM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), Anti-lock
Braking System (ABS), Electronic Brake-force Distribution (EBD), Brake Assist (BA)
and Smart Stop Technology (SST).
Vehicle Stability Control (VSC)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
Traction Control (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
Anti-Lock Brake System (ABS)
ABS helps prevent brakes from locking up by “pulsing” brake pressure to each
wheel. This limits brake lockup and helps provide directional control for the
current road conditions.
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
Electronic Brake Force Distribution (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. Abrupt stops can cause a vehicle
to tilt forward, reducing the braking power of the rear wheels. EBD responds to
sudden stops by redistributing brake force to enhance the braking effectiveness of
all four wheels.
Brake Assist (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a
split second to react, Brake Assist can add additional brake pressure more quickly
than just the driver alone can.
28
Smart Stop Technology (SST)
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
OVERVIEW
Smart Stop Technology automatically reduces driving torque when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
FEATURES/OPERATIONS
‡ 2QO\XVHIORRUPDWVGHVLJQHGIRU\RXUVSHFLILFPRGHO
‡ 8VHRQO\RQHIORRUPDWDWDWLPHXVLQJWKHUHWDLQLQJKRRNVWRNHHSWKHPDWLQ
place.
‡ ,QVWDOOIORRUPDWVULJKWVLGHXS
SAFETY AND EMERGENCY FEATURES
29
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
Printed in U.S.A. 9/13
13-TCS-07410
00505-QRG13-RAV4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement