Toyota RAV4, RAV4 HV Owner's manual

Toyota RAV4, RAV4 HV Owner's manual
Quick guide
Basic function
Navigation
system
• Giving guidance for the route quickly
• Information to be read before operation
• Setting initial settings before operation
• Connecting the Bluetooth® device
• Operating the map screen
• Searching the map
• Activating the route guidance
1
2
3
Audio/visual
system
• Listening to the radio
• Enjoying music and video
4
Voice command
system
• Operating the voice command system
5
Information
• Operating the weather information screen
6
Phone
• Operating the phone
Toyota Entune
• Operating the Toyota Entune
Index
• Search alphabetically
(Hands-free system for cellular phones)
7
8
2
TABLE OF CONTENTS
Introduction ................................ 6
Reading this manual .................. 8
1
Quick guide
1-1. Basic function
Buttons overview..............12
“Menu” screen ..................14
Status icon .......................16
“Setup” screen .................18
“Information” screen .........20
1-2. Navigation operation
Operating the map screen21
Guiding the route .............22
Registering home .............23
2
Basic function
2-1. Basic information before
operation
Initial screen .....................26
Touch screen....................27
Home screen....................29
Entering letters and numbers/list screen operation30
Screen adjustment ...........33
Linking multi-information display and the system .......35
2-2. Connectivity settings
Registering/Connecting a
Bluetooth® device ..........36
Setting Bluetooth® details 40
Wi-Fi® Hotspot .................47
Apple CarPlay ..................52
2-3. Other settings
General settings...............56
Voice settings ...................60
Vehicle settings ................61
3
Navigation system
3-1. Basic operation
Navigation ........................68
Map screen operation.......70
Map screen information....72
Traffic information.............77
3-2. Destination search
Destination search operation
.......................................80
Starting route guidance ....87
3-3. Route guidance
Route guidance screen ....91
Typical voice guidance
prompts ..........................95
Editing route .....................95
3-4. Setup
Navigation settings ...........98
Detailed navigation settings
.................................... 103
Traffic settings ............... 107
Use of information accumulated by navigation system
(Vehicles equipped with
DCM) ........................... 112
3-5. Tips for the navigation system
GPS (Global Positioning System) ............................. 113
Map database version and
covered area ............... 115
TABLE OF CONTENTS
4
Audio/visual system
4-1. Basic operation
Quick reference............. 118
Some basics ................. 119
4-2. Radio operation
AM/FM/SiriusXM (SXM) radio
.................................... 123
Internet radio ................. 131
4-3. Media operation
USB memory................. 132
iPod/iPhone................... 134
Bluetooth® audio ........... 137
AUX............................... 140
4-4. Audio/visual remote controls
Steering switches.......... 142
4-5. Setup
Audio settings ............... 144
6
Voice command system
5-1. Voice command system
operation
Voice command system 156
Natural language understanding....................... 159
Command list ................ 160
5-2. Mobile Assistant operation
Mobile Assistant ............ 165
Information
6-1. Information display
Receiving weather information............................... 168
Data services settings ... 170
7
1
2
3
Phone
4
7-1. Phone operation (Handsfree system for cellular
phones)
Quick reference ............. 172
Some basics.................. 173
Placing a call using the Bluetooth® hands-free system
.................................... 177
Receiving a call using the
Bluetooth® hands-free system .............................. 180
Talking on the Bluetooth®
hands-free system....... 181
4-6. Tips for operating the
audio/visual system
Operating information ... 146
5
3
Bluetooth® phone message
function........................ 184
7-2. Setup
Phone settings............... 188
7-3. What to do if...
Troubleshooting............. 198
8
Toyota Entune
8-1. Toyota Entune overview
Functional overview....... 204
Type A: Function achieved by
using a smartphone or DCM
.................................... 206
5
6
7
8
4
TABLE OF CONTENTS
Type B: Function achieved by
using DCM and the system
.................................... 209
Type C: Function achieved by
using DCM .................. 211
Type D: Function achieved by
using DCM and a smartphone .......................... 213
8-2. Toyota Entune operation
Toyota Entune App Suite
Connect....................... 215
Toyota Entune Destinations
.................................... 219
8-3. Setup
Toyota Entune App Suite
Connect settings ......... 221
Index
Alphabetical Index ........ 224
TABLE OF CONTENTS
5
1
2
3
4
5
6
7
8
6
Introduction
Navigation and multimedia system owner’s manual
This manual explains the operation of the system. Please read
this manual carefully to ensure
proper use. Keep this manual in
your vehicle at all times.
The screens shown in this manual may differ from the actual
screen of the system depending
on availability of functions, Toyota Entune subscription status,
and map data available at the
time this manual was produced.
The screens in this manual will
also differ if the screen theme
settings have been changed.
(Theme setting: P.56)
In some situations when changing between screens, it may
take longer than normal for the
screen to change, the screen
may be blank momentarily or
noise may be displayed.
Please be aware that the content of this manual may be different from the system in some
cases, such as when the system’s software is updated.
Navigation system (Entune Premium Audio)
The navigation system is one of
the most technologically
advanced vehicle accessories
ever developed. The system
receives satellite signals from
the Global Positioning System
(GPS) operated by the U.S.
Department of Defense. Using
these signals and other vehicle
sensors, the system indicates
your present position and
assists in locating a desired destination.
The navigation system is
designed to select efficient
routes from your present starting location to your destination.
The system is also designed to
direct you to a destination that is
unfamiliar to you in an efficient
manner. The system uses AISIN
AW maps. The calculated routes
may not be the shortest nor the
least traffic congested. Your own
personal local knowledge or
“short cut” may at times be
faster than the calculated
routes.
The navigation system’s database includes Point of Interest
categories to allow you to easily
select destinations such as
restaurants and hotels. If a destination is not in the database,
you can enter the street address
close to it and the system will
guide you there.
The system will provide both a
visual map and audio instructions. The audio instructions will
7
announce the distance remaining and the direction to turn in
when approaching an intersection. These voice instructions
will help you keep your eyes on
the road and are timed to provide enough time to allow you to
maneuver, change lanes or slow
down.
Please be aware that all current
vehicle navigation systems have
certain limitations that may
affect their ability to perform
properly. The accuracy of the
vehicle’s position depends on
satellite conditions, road configuration, vehicle condition or
other circumstances. For more
information on the limitations of
the system, refer to page 113.
TOYOTA MOTOR CORPORATION
8
Reading this manual
Symbols
Indicates the action
(pushing, turning, etc.)
used to operate
switches and other
devices.
Explains symbols used in
this manual
Symbols in this manual
Symbols
Meanings
Meanings
WARNING:
Explains something
that, if not obeyed,
could cause death or
serious injury to people.
NOTICE:
Explains something
that, if not obeyed,
could cause damage
to or a malfunction in
the vehicle or its
equipment.
Indicates operating or
working procedures.
Follow the steps in
numerical order.
Symbols in illustrations
Symbols
Meanings
Indicates the component or position being
explained.
Different writing styles for
gasoline and hybrid vehicles
Information for hybrid vehicles is
written in brackets next to the
information for gasoline vehicles.
Example
Turn the engine switch*1 <power
switch>*2 to ACC or ON.
*1
: Vehicles with gasoline engine
*2:
Vehicles with hybrid system
9
Safety instruction (Entune
Audio Plus)
To use this system in the safest
possible manner, follow all the
safety tips shown below.
Do not use any feature of this
system to the extent it becomes
a distraction and prevents safe
driving. The first priority while
driving should always be the
safe operation of the vehicle.
While driving, be sure to
observe all traffic regulations.
Prior to the actual use of this
system, learn how to use it and
become thoroughly familiar with
it. Read the entire manual to
make sure you understand the
system. Do not allow other people to use this system until they
have read and understood the
instructions in this manual.
For your safety, some functions
may become inoperable when
driving. Unavailable screen buttons are dimmed.
WARNING
● For safety, the driver should not
operate the system while
he/she is driving. Insufficient
attention to the road and traffic
may cause an accident.
Safety instruction (Entune
Premium Audio)
To use this system in the safest
possible manner, follow all the
safety tips shown below.
This system is intended to assist
in reaching the destination and,
if used properly, can do so. The
driver is solely responsible for
the safe operation of your vehicle and the safety of your passengers.
Do not use any feature of this
system to the extent it becomes
a distraction and prevents safe
driving. The first priority while
driving should always be the
safe operation of the vehicle.
While driving, be sure to
observe all traffic regulations.
Prior to the actual use of this
system, learn how to use it and
become thoroughly familiar with
it. Read the entire manual to
make sure you understand the
system. Do not allow other people to use this system until they
have read and understood the
instructions in this manual.
For your safety, some functions
may become inoperable when
driving. Unavailable screen buttons are dimmed.
WARNING
● For safety, the driver should not
operate the system while
he/she is driving. Insufficient
attention to the road and traffic
may cause an accident.
10
WARNING
● While driving, be sure to obey
the traffic regulations and maintain awareness of the road conditions. If a traffic sign on the
road has been changed, route
guidance may not have the
updated information such as the
direction of a one way street.
While driving, listen to the voice
instructions as much as possible
and glance at the screen briefly
and only when it is safe. However, do not totally rely on voice
guidance. Use it just for reference. If the system cannot
determine the current position
correctly, there is a possibility of
incorrect, late, or non-voice
guidance.
The data in the system may
occasionally be incomplete.
Road conditions, including driving restrictions (no left turns,
street closures, etc.) frequently
change. Therefore, before following any instructions from the
system, look to see whether the
instruction can be done safely
and legally.
This system cannot warn about
such things as the safety of an
area, condition of streets, and
availability of emergency services. If unsure about the safety
of an area, do not drive into it.
Under no circumstances is this
system a substitute for the
driver’s personal judgement.
Use this system only in locations
where it is legal to do so. Some
states/provinces may have laws
prohibiting the use of video and
navigation screens next to the
driver.
11
Quick guide
Buttons overview............12
“Menu” screen ................14
Status icon .....................16
“Setup” screen ...............18
“Information” screen .......20
1-2. Navigation operation
Operating the map screen
.....................................21
Guiding the route ...........22
Registering home ...........23
1
Quick guide
1-1. Basic function
1
12
1-1. Basic function
Buttons overview
1-1.Basic function
Operations of each part
A By touching the screen with your finger, you can control the
selected functions. (P.27, 28)
B Press to seek up or down for a radio station or to access a
desired track/file. (P.123, 133, 135, 138)
C Press to access the Bluetooth® hands-free system. (P.172)
When an Apple CarPlay connection is established, press to display the phone app screen.*1, 2
D Press to display the Toyota Entune App Suite Connect screen.*2,
3
(P.215)
E Turn to change the radio station or skip to the next or previous
track/file. (P.123, 133, 135, 138)
F Press to turn the audio/visual system on and off, and turn it to
adjust the volume. Press and hold to restart the system. (P.26,
119)
G Entune Premium Audio: Press to display the map screen and
repeat a voice guidance. (P.68)
1-1. Basic function
13
H Press to display the audio/visual system screen. (P.118, 119)
I Press to display the “Menu” screen. (P.14)
J Press to display the home screen. (P.29)
*1
: For details about Apple CarPlay: P.52
*2
: This function is not made available in some countries or areas.
*3: The
Toyota Entune App Suite Connect screen may not be displayed
when an Apple CarPlay connection is established.
*4
: For details about a turn-by-turn navigation application, refer to
http://www.toyota.com/Entune/ in the United States,
http://www.toyota.ca/entune in Canada, and
http://www.toyotapr.com/entune in Puerto Rico.
1
Quick guide
Entune Audio Plus: If a turn-by-turn navigation application has
been downloaded to a connected smartphone, the application will
be displayed and can be used.*4
When an Apple CarPlay connection is established, press to display the Maps app screen.*1, 2
14
1-1. Basic function
“Menu” screen
“Menu” screen operation
Press the “MENU” button to display the “Menu” screen.

Entune Audio Plus
A Displays the clock. Select to display the clock settings screen.
(P.57)
B Select to display the audio control screen. (P.118)
C Select to display the hands-free operation screen. (P.172)
When an Apple CarPlay connection is established, select to display the phone app screen.*1 (P.52)
D Select to display the application screen.*1 (P.215)
E When an Apple CarPlay connection is established and this button
displays “Apple CarPlay”, select to display the home screen of
Apple CarPlay.*1 (P.52)
F Vehicles equipped without DCM: Select to display the fuel con-
sumption or energy monitor*2 screen.*3
Vehicles equipped with DCM: Select to display the information
screen. (P.20)
G Select to display the “Setup” screen. (P.18)
H Select to adjust the contrast, brightness, etc. of the display.
(P.33)
*1: This
function is not made available in some countries or areas.
*2
: Vehicles with hybrid system
*3
: Refer to the “OWNER’S MANUAL”
1-1. Basic function

15
Entune Premium Audio
1
Quick guide
A Displays the clock. Select to display the clock settings screen.
(P.57)
B Select to display the destination screen. (P.80)
C Select to display the audio control screen. (P.118)
D Select to display the hands-free operation screen. (P.172)
When an Apple CarPlay connection is established, select to display the Phone app screen.* (P.52)
E Select to display the application screen.* (P.215)
F When an Apple CarPlay connection is established and this button
displays “Apple CarPlay”, select to display the home screen of
Apple CarPlay.* (P.52)
G Select to display the information screen. (P.20)
H Select to display the “Setup” screen. (P.18)
I Select to adjust the contrast, brightness, etc. of the display.
(P.33)
*:
This function is not made available in some countries or areas.
16
1-1. Basic function
Status icon
F Bluetooth® phone connection
Status icons are displayed
at the top of the screen.
G Wi-Fi® connection condition
condition display (P.17)
display*2, 3 (P.47)
*1
Status icon explanation
: Entune Premium Audio only
*2: Vehicles
*3
equipped with DCM
: This function is not made available in some countries or areas.
● The number of status icons that
can be displayed differs depending on the displayed screen.
Reception level display
A Weather alert display*1, 3
(P.168)
• Select to display important
weather information for the current
location or along the route.
B Indicate during data commu-
nication performed via Data
Communication Module
(DCM)*2
C The reception level of Data
Communication Module
(DCM) display*2 (P.16)
D The reception level of the
connected phone display
(P.16)
E Remaining battery charge
display (P.17)
The level of reception does not
always correspond with the level
displayed on the cellular phone.
The level of reception may not
be displayed depending on the
phone you have.
When the cellular phone is out
of the service area or in a place
inaccessible by radio waves,
/
is displayed.
“Rm” is displayed when receiving in a roaming area. While
roaming, display “Rm” top-left
on the icon.
The receiving area may not be
displayed depending on the type
of Bluetooth® phone you have.
1-1. Basic function

While connected with cellular
phone
Indicators
Poor
Indicators
Empty
Full
Excellent

While using Data Communication Module (DCM)
Reception Level
Indicators
Poor
Excellent

While using Wi-Fi® Hotspot
Reception Level
Indicators
No connection
Connected
● When Wi-Fi® Hotspot is off, no
item is displayed.
Remaining battery charge
display
The amount displayed does not
always correspond with the
amount displayed on the Bluetooth® device.
The amount of battery charge
left may not be displayed
depending on the type of the
Bluetooth® device connected.
This system does not have a
charging function.
Bluetooth® connection
condition display
An antenna for the Bluetooth®
connection is built into the
instrument panel.
The condition of the Bluetooth®
connection may deteriorate and
the system may not function
when a Bluetooth® phone is
used in the following conditions
and/or places:
The cellular phone is obstructed
by certain objects (such as
when it is behind the seat or in
the glove box or console box).
The cellular phone is touching or
is covered with metal materials.
Leave the Bluetooth® phone in a
place where the condition of the
Bluetooth® connection is good.
Indicators
(Blue)
Conditions
Indicates that the condition of the Bluetooth® connection is
good.
1
Quick guide
Reception Level
Remaining
charge
17
18
1-1. Basic function
Indicators
(Gray)
Conditions
While in this condition,
sound quality during
phone calls may deteriorate.
Indicates that the cellular phone is not connected via Bluetooth®.
“Setup” screen
“Setup” screen
Press the “MENU” button, then
select “Setup” to display the
“Setup” screen. The items
shown on the “Setup” screen
can be set.

Entune Audio Plus
A Select to change the selected
language, operation sound
settings, etc. (P.56)
B Select to set Bluetooth®
device and Bluetooth® system settings. (P.40)
C Select to set audio settings.
(P.144)
D Select to set the phone
sound, contacts, message
settings, etc. (P.188)
E Select to set the voice set-
1-1. Basic function
settings, etc. (P.56)
tings. (P.60)
F Select to set vehicle informa-
B Select to set Bluetooth®
device and Bluetooth® system settings. (P.40)
G Select to set Wi-Fi® connec-
C Select to set audio settings.
(P.144)
H Select to set Toyota Entune
App Suite Connect settings.*2
(P.221)
*1
: Vehicles equipped with DCM
*2
: This function is not made available in some countries or areas.

Entune Premium Audio
D Select to set the phone
sound, contacts, message
settings, etc. (P.188)
E Select to set the voice set-
tings. (P.60)
F Select to set vehicle informa-
tion such as maintenance
information. (P.61)
G Select to set memory points
(home, favorites entries,
areas to avoid), or navigation details. (P.98)
H Select to set Wi-Fi® connec-
tion settings.*1, 2 (P.48)
I Select to set Toyota Entune
App Suite Connect settings.*2
(P.221)
J Select to set traffic informa-
tion settings.*2 (P.107)
K Select to set data services
settings.*2 (P.170)
*1
: Vehicles equipped with DCM
*2: This
function is not made available in some countries or areas.
A Select to change the selected
language, operation sound
1
Quick guide
tion. (P.61)
tion settings.*1, 2 (P.48)
19
20
1-1. Basic function
“Information” screen
“Information” screen*
*
: Entune Audio Plus with
DCM/Entune Premium Audio only
Useful information, such as the
fuel consumption, weather, etc.,
is available on the information
screen.
The information screen can be
reached by the following methods:
1 Press the “MENU” button.
2 Select “Info”.
3 Select the desired item.
A Select to display the fuel con-
sumption and energy monitor*1 screen.*2
B Select to display traffic infor-
mation.*3,4 (P.77)
C Select to display weather
information.*3,4 (P.168)
D Select to display the vehicle
alert history.*4,5
*1
: Vehicles with hybrid system
*2
: Refer to the “OWNER’S MANUAL”
*3: Entune
Premium Audio only
*4
: This function is not made available in some countries or areas.
*5
: Vehicles equipped with DCM
1-2. Navigation operation
Operating the map
screen*
1-2.Navigation operation
: Entune Premium Audio only
Displaying the current
position of the vehicle on
the map screen
(P.70)
Moving the map screen
1 Select the desired point on
the map screen.
1 Press the “MAP” button.
 The map screen can be
scrolled by touching, dragging
or flicking it. (P.27)
 The current position of the
vehicle is displayed on the
map screen.
 Press the “MAP” button to
return to the current position.
Zooming in/out the map
■ Displaying the map screen
■ Zooming in the map
The following operations can
also be performed.
1 Select
or pinch out on the
map screen. (P.70)
 Changing the map direction
(P.71)
■ Zooming out the map
 Displaying 3D map (P.71)
 Changing the map color
(P.104)
 Displaying the micro city map
1 Select
or pinch in on the
on the map screen. (P.70)
1
Quick guide
*
21
22
1-2. Navigation operation
Guiding the route*
*:
Entune Premium Audio only
Setting the destination
1 Press the “MAP” button.
5 Select “OK”.
 Selecting routes other than
the one recommended
(P.88)
 Guidance to the destination is
displayed on the screen and
can be heard via voice guidance.
Deleting destinations
2 Select
.
3 There are different kinds of
methods to search for a destination. (P.80)
4 Select “Go”.
 Check that the route overview
is displayed. (P.88)
When route guidance is no longer necessary, such as when
you know the rest of the route to
your destination, the destination
can be deleted.
1 Press the “MAP” button.
2 Select
.
3 Select “Yes” when the confirmation screen appears.
 When more than 1 destination
has been set, a list will be dis-
1-2. Navigation operation
23
Registering home*
played on the screen. Select
the item(s) to be deleted.
Entune Premium Audio only
Registering home
1 Turn the engine switch
<power switch> to ACC or
ON.
2 Press the “MAP” button.
3 Select
.
4 Search for your home.
• There are different kinds of
methods to search for your
home. (P.80)
5 Select “Enter”.
6 Select “OK”.
 Registration of home is complete.
• Registering home in a different
way
P.98
Quick guide
*:
1
24
1-2. Navigation operation
• Editing the name, location, phone
number and icon
P.98
• Setting home as the destination
P.81
Setting home as the destination
1 Press the “MAP” button.
2 Select
.
 Guidance to the destination is
displayed on the screen and
can be heard via voice guidance.
 Setting home as the destination in a different wayP.98
25
Basic function
Initial screen ...................26
Touch screen..................27
Home screen..................29
Entering letters and numbers/list screen operation
.....................................30
Screen adjustment .........33
Linking multi-information
display and the system.35
2-2. Connectivity settings
Registering/Connecting a
Bluetooth® device ........36
Setting Bluetooth® details
.....................................40
Wi-Fi® Hotspot ...............47
Apple CarPlay ................52
2-3. Other settings
General settings .............56
Voice settings.................60
Vehicle settings ..............61
2
Basic function
2-1. Basic information before
operation
2
26
2-1. Basic information before operation
Initial screen
2-1.Basic information before operation
When the engine switch
<power switch> is in ACC or
ON, the initial screen will be
displayed and the system
will begin operating.
Caution screen
After a few seconds, the caution
screen will be displayed.
After about 5 seconds or selecting “Continue”, the caution
screen automatically switches to
the next screen.
WARNING
● When the vehicle is stopped
with the engine running <the
hybrid system operating>,
always apply the parking brake
for safety.
Maintenance information*
*:
Entune Premium Audio only
This system reminds users
when to replace certain parts or
components and shows dealer
information (if registered) on the
screen.
When the vehicle reaches a previously set driving distance or
date specified for a scheduled
maintenance check, the maintenance remainder screen will be
displayed when the system is
turned on.
 To prevent this screen from
being displayed again, select
“Do Not Tell Me Again”.
 To register maintenance information: P.62
 If
is selected, the registered phone number can be
called.
Restarting the system
When system response is
extremely slow, the system can
be restarted.
1 Press and hold the “POWER
VOLUME” knob for 3 seconds or more.
2-1. Basic information before operation
27
Touch screen
Touch screen gestures
Operation method
Outline
 Touch
Quickly touch and
release once.
Main use
 Selecting an item
on the screen
 Drag*1
Touch the screen
with your finger,
and move the
screen to the
desired position.
 Scrolling the lists
 Scrolling the map
screen*2
 Flick*1
 Scrolling the main
screen page
 Scrolling the map
screen*2
Quickly move the
screen by flicking
with your finger.
 Pinch in/Pinch
out*2, 3
 Changing the
Slide fingers toward scale of the
map*2
each other or apart
on the screen.
*1
: The above operations may not be performed on all screens.
*2
: Entune Premium Audio only
*3: The Apple
CarPlay Maps app is not compatible with pinch multi-touch
2
Basic function
Operations are performed by touching the touch screen directly with
your finger.
28
2-1. Basic information before operation
gestures.
● Flick operations may not be per-
formed smoothly at high altitudes.
Touch screen operation
This system is operated
mainly by the buttons on
the screen. (Referred to as
screen buttons in this manual.)
When a screen button is
touched, a beep sounds. (To
set the beep sound: P.56)
● If the system does not respond to
touching a screen button, move
your finger away from the screen
and then touch it again.
● Dimmed screen buttons cannot be
operated.
● The displayed image may become
darker and moving images may
be slightly distorted when the
screen is cold.
● In extremely cold conditions, the
screen may not be displayed and
the data input by a user may be
deleted. Also, the screen buttons
may be harder than usual to
depress.
● When you look at the screen
through polarized material such as
polarized sunglasses, the screen
may be dark and hard to see. If
so, look at the screen from different angles, adjust the screen settings on the display settings
screen or take off your sunglasses.
● When
is displayed on the
screen, select
previous screen.
to return to the
NOTICE
● To prevent damaging the
screen, lightly touch the screen
buttons with your finger.
● Do not use objects other than
your finger to touch the screen.
● Wipe off fingerprints using a
glass cleaning cloth. Do not use
chemical cleaners to clean the
screen, as they may damage
the touch screen.
Capacitive touch screen
buttons
The operable areas of the
capacitive touch screen buttons
use capacitive touch sensors
and may not operate properly in
the following situations:
 If the screen is dirty or wet
 If a source of strong electromagnetic waves is brought
near the screen
 If a glove is worn during operation
 If the screen is touched by a
fingernail
 If a stylus is used to operate
the buttons
 If your palm touches the operable area of another button
during operation
 If a button is touched quickly
 If the operable part of a
capacitive touch screen button is touched by or covered
with a metal object, such as
2-1. Basic information before operation
the following, it may not operate properly:
• Magnetic isolation cards
• Metallic foil, such as the inner
packaging of a cigarette box
• Coins
• Discs, such as a CD or DVD
 If the operable part of a
capacitive touch screen button is wiped, it may operate
unintentionally.
 If the capacitive touch screen
button is being touched when
the engine switch <power
switch> is changed to ACC or
ON, the button may not operate properly. In this case,
remove anything touching the
button, turn the engine switch
<power switch> off and then
turn it to ACC or ON, or
restart the system by press
and hold the “POWER VOLUME” knob for 3 seconds or
more.
Home screen
On the home screen, multiple screens, such as the
audio/visual system screen,
hands-free screen and clock
screen, can be displayed
simultaneously.
Home screen operation
1 Press the “HOME” button.
2 Check that the home screen
is displayed.
● Capacitive touch screen button
sensor sensitivity can be adjusted.
(P.56)
 Selecting a screen will display
it full screen.
● The display information and area
on the home screen can be customized.
● The home screen can be set to
several types of split layouts.
2
Basic function
• Metallic wallets or bags
29
30
2-1. Basic information before operation
Customizing the home
screen
The display information/area on
the home screen and the home
screen layout can be changed.
1 Press the “MENU” button.
2 Select “Setup”.
 If the general settings screen
is not displayed, select “General”.
Entering letters and
numbers/list screen
operation
Entering letters and numbers
When searching by an address,
name, etc., or entering data, letters and numbers can be
entered via the screen.
3 Select “Customize Home
Screen”.
4 Select the items to be set.
A When this icon is displayed,
A Select to change the display
information and area on the
home screen.
B Select to change the home
screen layout.
select to enable the dictation
function.* (English only)
(P.158)
B Text field. Entered charac-
ter(s) will be displayed.
C Select to erase one charac-
ter.
Select and hold to continue
erasing characters.
D Select to move the cursor.
E Select to choose predictive
text candidate for entered
text. (P.31)
F Select to display a list of pre-
dictive text candidates when
there is more than one.
(P.31)
2-1. Basic information before operation
G Select to enter desired char-
acters.
H Select to enter characters in
lower case or in upper case.
types. (P.31)
J Select to make a space on
cursor.
*
: Entune Premium Audio with DCM
only
Displaying predictive text
candidates
When text is input, the system
predicts the text that may complete the currently unconfirmed
text and displays predictive
replacement candidates that
match the beginning of the text.
1 Input text.
2 Select the desired candidate.
● Keyboard layout can be changed.
(P.56)
Changing character type
1 Select “Change Type”.
 To select a candidate that is
not displayed, select
, and
then select the desired predictive replacement candidate.
2 Select the desired character.
List screen
● Depending on the screen being
displayed, it may not be possible
to change keyboard characters.
The list screen may be displayed after entering characters.
When a list is displayed, use the
appropriate screen button to
scroll through the list.
2
Basic function
I Select to change character
31
32
2-1. Basic information before operation
Scrolling list screen
Sorting
The order of a list displayed on
the screen can be sorted in the
order of distance from the current location, date, category,
etc.
1 Select “Sort”.
A To scroll up/down the list,
flick the list up/down.
B Select to skip to the next or
previous page. Select and
hold
or
to scroll
through the displayed list.
C Indicates the position of the
displayed entries in the entire
list.
To scroll up/down pages,
drag the bar.
● If
appears to the right of an
item name, the complete name is
too long to display.
• Select to
the name.
scroll to the end of
• Select
to move to the beginning of the name.
● Matching items from the data-
base are listed even if the entered
address or name is incomplete.
● The list will be displayed automatically if the maximum number of
characters is entered or matching
items can be displayed on a single
list screen.
● The number of matching items is
shown on the right side of the
screen. If the number of matching
items is more than 999, the system displays “***” on the screen.
2 Select the desired sorting criteria.
Searching a list
Items are displayed in the list
with the most similar results of
the search at the top.
1 Select
.
2-1. Basic information before operation
2 Input text.
4 The list is displayed.
Screen adjustment
The contrast and brightness
of the screen display and
the image of the camera display can be adjusted. The
screen can also be turned
off, and/or changed to either
day or night mode.
(For information regarding
audio/visual screen adjustment: P.122)
Displaying the screen
adjustment screen
1 Press the “MENU” button.
2 Select “Display”.
3 Select the desired items to
be set.
A Select to turn the screen off.
To turn it on, press any but-
2
Basic function
3 Select “Search”.
33
34
2-1. Basic information before operation
ton.
B Select to turn day mode
on/off. (P.34)
C Select to adjust the screen
display. (P.34)
D Select to adjust the camera
display.
● When the screen is viewed
through polarized sunglasses, a
rainbow pattern may appear on
the screen due to optical characteristics of the screen. If this is disturbing, please operate the screen
without polarized sunglasses.
Changing between day
and night mode
Depending on the position of the
headlight switch, the screen
changes to day or night mode.
This feature is available when
the headlight is switched on.
1 Select “Day Mode”.
● If the screen is set to day mode
with the headlight switch turned
on, this condition is memorized
even with the engine <hybrid system> turned off.
Adjusting the contrast/brightness
The contrast and brightness of
the screen can be adjusted
according to the brightness of
your surroundings.
1 Select “General” or “Camera”.
2 Select the desired item.
 “Display (General)” screen
only: Select “<” or “>” to select
the desired display.
• “Contrast”
“+”: Select to strengthen the contrast of the screen.
“-”: Select to weaken the contrast of
the screen.
• “Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
2-1. Basic information before operation
35
Linking multi-information display and the
system
2
 Audio
 Phone*
etc.
These functions can be
operated using multi-information display control
switches on the steering
wheel. For details, refer to
“OWNER’S MANUAL”.
*
: When an Apple CarPlay connection is established, this
function will be unavailable.
Basic function
The following functions of
the system are linked with
the multi-information display in the instrument cluster:
36
2-2. Connectivity settings
Registering/Connecting a Bluetooth®
device
2-2.Connectivity settings
2 Press the “MENU” button.
To use the hands-free system, it is necessary to register a Bluetooth® phone with
the system.
Once the phone has been
registered, it is possible to
use the hands-free system.
This operation cannot be
performed while driving.
When an Apple CarPlay
connection is established,
Bluetooth® functions of the
system will become unavailable and any connected
Bluetooth® devices will be
disconnected.
Registering a Bluetooth®
phone for the first time
■ Registering from the sys-
tem
3 Select “Phone”.
 Operations up to this point
can also be performed by
pressing the “PHONE” button
on the instrument panel.
4 Select “Yes” to register a
phone.
5 Select the desired Bluetooth®
device.
1 Turn the Bluetooth® connection setting of your cellular
phone on.
 This function is not available
when Bluetooth® connection
setting of your cellular phone
is set to off.
 If the desired Bluetooth®
phone is not on the list, select
“If you cannot find...” and follow the guidance on the
2-2. Connectivity settings
screen. (P.38)
6 Register the Bluetooth®
device using your Bluetooth® device.
37
established but registration is
not yet complete).
2
 For details about operating
the Bluetooth® device, see
the manual that comes with it.
 A PIN code is not required for
SSP (Secure Simple Pairing)
compatible Bluetooth®
devices. Depending on the
type of Bluetooth® device
being connected, a message
confirming registration may
be displayed on the Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according
to the confirmation message.
7 Check that the following
screen is displayed, indicating pairing was successful (a
Bluetooth® link has been
 At this stage, the Bluetooth®
functions are not yet available.
8 Check that “Connected” is
displayed and registration is
complete.
 If an error message is displayed, follow the guidance
on the screen to try again.
● If a cellular phone does not oper-
ate properly after being connected, turn the cellular phone off
and on and then connect it again.
Basic function
 The system is connecting to
the registered device.
38
2-2. Connectivity settings
■ Registering from phone
1 Select “If you cannot find…”.
2 Select “Register from
Phone”.
devices. Depending on the
type of Bluetooth® device
being connected, a message
confirming registration may
be displayed on the Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according
to the confirmation message.
4 Follow the steps in “Registering a Bluetooth® phone for
the first time” from step 7.
(P.36)
Registering a Bluetooth®
audio player for the first
time
3 Check that the following
screen is displayed, and register the Bluetooth® device
using your Bluetooth®
device.
To use the Bluetooth® audio, it is
necessary to register an audio
player with the system.
Once the player has been registered, it is possible to use the
Bluetooth® audio.
This operation cannot be performed while driving.
For details about registering a
Bluetooth® device: P.42
 For details about operating
the Bluetooth® device, see
the manual that comes with it.
 A PIN code is not required for
SSP (Secure Simple Pairing)
compatible Bluetooth®
When an Apple CarPlay connection is established, Bluetooth® functions of the system
will become unavailable and any
connected Bluetooth® devices
will be disconnected.
2-2. Connectivity settings
1 Turn the Bluetooth® connection setting of your audio
player on.
2 Press the “AUDIO” button.
■ Profiles
 HFP (Hands Free Profile) Ver.
1.0 (Recommended: Ver. 1.7)
• This is a profile to allow handsfree phone calls using a cellular
phone. It has outgoing and
incoming call functions.
 OPP (Object Push Profile)
Ver. 1.1 (Recommended: Ver.
1.2)
• This is a profile to transfer contacts data.
 PBAP (Phone Book Access
Profile) Ver. 1.0 (Recommended: Ver. 1.2)
3 Select “Source” on the audio
screen or press “AUDIO” button again.
4 Select “Bluetooth”.
5 Select “Yes” to register an
audio player.
6 Follow the steps in “Registering a Bluetooth® phone for
the first time” from step 5.
(P.36)
Profiles
This system supports the following services.
■ Bluetooth® Core Specifica-
tion
 Ver. 2.0 (Recommended: Ver.
4.1 +EDR)
• This is a profile to transfer phonebook data.
 MAP (Message Access Profile) Ver. 1.0 (Recommended:
Ver. 1.2)
• This is a profile to use phone
message functions.
 SPP (Serial Port Profile) Ver.
1.1 (Recommended: Ver. 1.2)
• This is a profile to use the “Toyota
Entune” function.
 A2DP (Advanced Audio Distribution Profile) Ver. 1.0 (Recommended: Ver. 1.3)
• This is a profile to transmit stereo
audio or high quality sound to the
audio/visual system.
 AVRCP (Audio/Video Remote
Control Profile) Ver. 1.0 (Recommended: Ver. 1.6)
• This is a profile to allow remote
control the A/V equipment.
2
Basic function
 This function is not available
when the Bluetooth® connection setting of your audio
player is set to off.
39
40
2-2. Connectivity settings
● This system is not guaranteed to
operate with all Bluetooth®
devices.
● If your cellular phone does not
support HFP, registering the Bluetooth® phone or using OPP,
PBAP, MAP or SPP profiles individually will not be possible.
Setting Bluetooth®
details
Displaying the Bluetooth® setup screen
1 Press the “MENU” button.
● If the connected Bluetooth®
device version is older than recommended or incompatible, the
Bluetooth® device function may
not work properly.
● Refer to
http://www.toyota.com/Entune/ in
the United States,
http://www.toyota.ca/entune in
Canada, and
http://www.toyotapr.com/entune in
Puerto Rico, to find approved
Bluetooth® phones for this system.
● Certification
2 Select “Setup”.
3 Select “Bluetooth”.
4 Select the desired item to be
set.
Bluetooth is a registered trademark
of Bluetooth SIG, Inc.
Bluetooth® setup screen
A Connecting a Bluetooth®
2-2. Connectivity settings
device and editing the Bluetooth® device information
(P.41, 43)
B Registering a
Bluetooth®
device (P.42)
(P.43)
D Setting the Bluetooth® sys-
tem (P.45)
Connecting a Bluetooth®
device
connected device will be displayed in color.
 Selecting a profile icon which
is not currently connected will
switch the connection to the
function.
 If the desired Bluetooth®
device is not on the list, select
“Add New Device” to register
the device. (P.42)
4 Select the desired connection.
Up to 5 Bluetooth® devices
(Phones (HFP) and audio players (AVP)) can be registered.
If more than 1 Bluetooth® device
has been registered, select
which device to connect to.
1 Display the Bluetooth® settings screen. (P.40)
2 Select “Registered Device”.
3 Select the device to be connected.
 “Device Info”: Select to confirm and change the Bluetooth® device information.
(P.43)

When another Bluetooth®
device is connected
 To disconnect the Bluetooth®
device, select “Yes”.
5 Check that a confirmation
screen is displayed when the
connection is complete.
: Phone
: Audio player
: Phone/“Toyota Entune” service
 The profile icon for a currently
 If an error message is displayed, follow the guidance
on the screen to try again.
● It may take time if the device con-
nection is carried out during Bluetooth® audio playback.
2
Basic function
C Deleting a Bluetooth® device
41
42
2-2. Connectivity settings
● Depending on the type of Blue-
tooth®
device being connected, it
may be necessary to perform
additional steps on the device.
● When disconnecting a Bluetooth®
device, it is recommended to disconnect using the system.
■ Connecting a
Bluetooth®
device in a different way
(from phone top screen)
P.174
■ Connecting a Bluetooth®
device in a different way
(from phone setup screen)
P.188
■ Connecting a Bluetooth®
device in a different way
(from Bluetooth® audio
screen)
P.139
■ Auto connection mode
To turn auto connection mode
on, set “Bluetooth Power” to on.
(P.45) Leave the Bluetooth®
device in a location where the
connection can be established.
 When the engine switch
<power switch> is in ACC or
ON, the system searches for
a nearby registered device.
 The system will connect with
the registered device that was
last connected, if it is nearby.
When automatic connection
priority is set to on and there
is more than one registered
Bluetooth® phone available,
the system will automatically
connect to the Bluetooth®
phone with the highest priority. (P.45)
■ Connecting manually
When the auto connection has
failed or “Bluetooth Power” is
turned off, it is necessary to connect the Bluetooth® device manually.
1 Display the Bluetooth® settings screen. (P.40)
2 Follow the steps in “Connecting a Bluetooth® device” from
step 2. (P.41)
■ Reconnecting the Blue-
tooth® phone
If a Bluetooth® phone is disconnected due to poor reception
from the Bluetooth® network
when the engine switch <power
switch> is in ACC or ON, the
system automatically reconnects the Bluetooth® phone.
Registering a Bluetooth®
device
Up to 5 Bluetooth® devices can
be registered.
Bluetooth® compatible phones
(HFP) and audio players (AVP)
can be registered simultaneously.
2-2. Connectivity settings
This operation cannot be performed while driving.
43
3 Select the desired device.
1 Display the Bluetooth® settings screen. (P.40)
2
2 Select “Add New Device”.
When another Bluetooth®
device is connected
 To disconnect the Bluetooth®
device, select “Yes”.
4 Select “Yes” when the confirmation screen appears.
When 5 Bluetooth® devices
have already been registered
5 Check that a confirmation
screen is displayed when the
operation is complete.

 A registered device needs to
be replaced. Select “Yes”, and
select the device to be
replaced.
3 Follow the steps in “Registering a Bluetooth® phone for
the first time” from step 5.
(P.36)
Deleting a Bluetooth®
device
● When deleting a Bluetooth®
phone, the contact data will be
deleted at the same time.
Editing the Bluetooth®
device information
The Bluetooth® device’s information can be displayed on the
screen. The displayed information can be edited.
This operation cannot be performed while driving.
This operation cannot be performed while driving.
1 Display the Bluetooth® settings screen. (P.40)
1 Display the Bluetooth® settings screen. (P.40)
2 Select “Remove Device”.
2 Select “Registered Device”.
3 Select the desired device to
be edited.
Basic function

44
2-2. Connectivity settings
4 Select “Device Info”.
the Bluetooth® phone and
cannot be changed.
E Compatibility profile is unique
to the Bluetooth® device and
cannot be changed.
F Select to reset all setup
items.
5 Confirm and change the
Bluetooth® device information.
● If 2 Bluetooth® devices have been
registered with the same device
name, the devices can be distinguished referring to the device’s
address.
● Depending on the type of Bluetooth® phone, some information
may not be displayed.
Changing a device name
1 Select “Device Name”.
2 Enter the name and select
“OK”.
● Even if the device name is
changed, the name registered in
your Bluetooth® device does not
change.
A The name of the Bluetooth®
device is displayed. It can be
changed to a desired name.
(P.44)
B Select to set the Bluetooth®
audio player connection
method. (P.44)
C Device address is unique to
the device and cannot be
changed.
D Phone number is unique to
Setting audio player connection method
1 Select “Connect Audio Player
From”.
2-2. Connectivity settings
2 Select the desired connection method.
45
3 Select the desired item to be
set.
2
 Depending on the audio
player, the “Vehicle” or
“Device” connection method
may be best. As such, refer to
the manual that comes with
the audio player.
“Detailed Settings”
screen
The Bluetooth® settings can be
confirmed and changed.
1 Display the Bluetooth® settings screen. (P.40)
2 Select “Detailed Settings”.
A Select to set Bluetooth® con-
nection on/off. (P.45)
B Select to change the auto-
matic connection priority of
the registered Bluetooth®
devices. (P.46)
C Select to edit the system
information. (P.46)
D Select to reset all setup
items.
Changing “Bluetooth
Power”
1 Select “Bluetooth Power”.
When “Bluetooth Power” is on:
The Bluetooth® device is automatically connected when the
engine switch <power switch> is
in ACC or ON.
When “Bluetooth Power” is off:
The Bluetooth® device is disconnected, and the system will
not connect to it next time.
● While driving, the auto connection
state can be changed from off to
on, but cannot be changed from
Basic function
“Vehicle”: Select to connect the
audio player from the vehicle’s
audio/visual system.
“Device”: Select to connect the
vehicle’s audio/visual system from
the audio player.
46
2-2. Connectivity settings
on to off.
Setting automatic connection priority
2 Select the desired Bluetooth®
device and select “Move Up”
or “Move Down” to change
the preferred order.
The automatic connection priority of the registered Bluetooth®
devices can be changed.
1 Select “Preferred Device Settings”.
2 Select the desired item to be
set.
● A newly registered Bluetooth®
device will automatically be given
the highest automatic connection
priority.
Editing the system information
A Select to set automatic con-
nection priority on/off.
B Select to change the auto-
1 Select “System Information”.
2 Select the desired item to be
set.
matic connection priority of
the registered Bluetooth®
phones. (P.46)
C Select to change the auto-
matic connection priority of
the registered Bluetooth®
audio players. (P.46)
D Select to reset all setup
items.
■ Changing Bluetooth®
device automatic connection priority
1 Select “Preferred Phones” or
“Preferred Audio Players”.
A Displays system name. Can
2-2. Connectivity settings
Wi-Fi® Hotspot*
be changed to a desired
name. (P.47)
B PIN code used when the
C Device address is unique to
the device and cannot be
changed.
D Select to set the connection
status display of the phone
on/off.
E Select to set the connection
status display of the audio
player on/off.
F Compatibility profile of the
system
G Select to reset all setup
items.
■ Editing the system name
1 Select “System Name”.
2 Enter a name and select
“OK”.
■ Editing the PIN code
1 Select “System PIN Code”.
2 Enter a PIN code and select
“OK”.
*:
Vehicles equipped with DCM
By connecting a device to
the vehicle via Wi-Fi®, it can
access the internet through
the DCM.
 To use this function, a
Wi-Fi® Hotspot service subscription from Verizon Wireless is required. Contact
your Toyota dealer for
details.
 This function is not made
available in some countries
or areas.
Connecting a device to
the in-vehicle access
point
Searching for and connecting a device to the
vehicle access point
1 Enable the Wi-Fi® Hotspot
function. (P.48)
2 Disable the “Hide Access
Point” function. (P.48)
3 Search for the vehicle access
point using the device you
wish to connect.
 For details about operating
the device, refer to the documentation which came with it.
2
Basic function
Bluetooth® device was registered. Can be changed to a
desired code. (P.47)
47
48
2-2. Connectivity settings
4 Operate the device to connect it to the vehicle access
point.
 To check the vehicle access
point password, check “Password”. (P.48)
Changing the Wi-Fi® settings
1 Press the “MENU” button.
● Hints for connecting to the vehicle
via Wi-Fi® can be displayed.
(P.48)
Connecting a device to the
in-vehicle access point
using the access point
name (SSID)
2 Select “Setup”.
3 Select “Wi-Fi*”.
1 Enable the Wi-Fi® Hotspot
function. (P.48)
*:
2 Enable the “Hide Access
Point” function. (P.48)
4 Select the desired item to be
set.
3 Enter the access point name
(SSID) into the device you
wish to connect and connect
it.
Wi-Fi® is a registered trademark
of Wi-Fi Alliance®.
 To check the vehicle access
point password, check “Password”. (P.48)
 The security settings on the
device must be the same as
that displayed for “Security”.
(P.48)
 For details about operating
the device, refer to the documentation which came with it.
A Select to enable/disable the
Wi-Fi® Hotspot function.
(P.49)
2-2. Connectivity settings
B Select to check/change the
access point password.
(P.49)
C Select to display hints for
service subscription. (If the Toyota Entune App Suite Connect
application has not been
installed, install the application.)
Contact your Toyota dealer for
details about the Toyota Entune
App Suite Connect application.
D Select to make the access
point searchable/unsearchable.
E Select to check/change the
security protocol of the
access point (for authentication and encryption). (P.50)
Checking/changing the
password
1 Select “Password”.
2 Check that the following
screen is displayed.
F Select to change the access
point name (SSID). (P.50)
G Select to change the Wi-Fi®
connection channel (within
the 2.4GHz frequency band).
(P.50)
● If any settings have been
changed, it will be necessary to
reset the Wi-Fi® system to complete the changes. To reset the
Wi-Fi® system, select “Yes” on the
pop-up displayed after changing
the settings.
Enabling/disabling the
Wi-Fi® Hotspot function
When the Wi-Fi® Hotspot function is enabled, the system
checks for a valid Hotspot service subscription.
If a Hotspot service subscription
has not been started, start the
Toyota Entune App Suite Connect application to activate the
A Displays the password
B Select to display/hide the
entered password.
C Select to change the pass-
word.
Changing the password
1 Select “Change Password”.
2 Enter the desired password
and select “OK”.
 When setting/changing a
password, observe the following guidelines to help prevent
the password from being
cracked by a third party:
2
Basic function
connecting to the vehicle via
Wi-Fi®.
49
50
2-2. Connectivity settings
• Use an 8-character or longer
password consisting of letters
and numbers. (Non-ASCII characters will not be recognized by
the system.)
2 Check that the following
screen is displayed.
• Change the password regularly.
• If you write the password down,
do not leave it somewhere where
it would be visible.
• Do not use the same password
for vehicle Wi-Fi® Hotspot as
other accounts already protected
by a password.
• Avoid using easy to identify
words, such as your vehicle’s
model name or license plate
number, simple dictionary words,
or words with simple obfuscation,
such as [email protected] (for cat), as your
password.
Changing the security protocol
A Select to change the chan-
nel selection to automatic/manual.
B When “Manual” is selected,
select to change the channel.
Changing the channel
1 Set “Select Channel” to
“Manual”.
2 Select “Channel Number”.
1 Select “Security”.
3 Enter the desired channel
number and select “OK”.
2 Select the desired security
protocol.
 Channels 1 through 11 can be
selected.
Changing the access point
name (SSID)
1 Select “Access Point Name”.
2 Enter the desired access
point name (SSID) and select
“OK”.
Selecting a Wi-Fi® connection channel
1 Select “Channel”.
Wi-Fi® function operating
hints
● If a connected device is taken out
of the Wi-Fi® connection area, the
connection will be severed.
● If the vehicle is driven out of the
cellular communication coverage
area, connecting to the internet
via the Wi-Fi® Hotspot will not be
possible.
● If a Bluetooth® device is used
while a device is connected using
2-2. Connectivity settings
WARNING
● Use Wi-Fi® devices only when
safe and legal to do so.
● Your audio unit is fitted with
Wi-Fi® antennas. People with
implantable cardiac pacemakers, cardiac resynchronization
therapy-pacemakers or implantable cardioverter defibrillators
should maintain a reasonable
distance between themselves
and the Wi-Fi® antennas.
The radio waves may affect the
operation of such devices.
● Before using Wi-Fi® devices,
users of any electrical medical
device other than implantable
cardiac pacemakers, cardiac
resynchronization therapypacemakers or implantable cardioverter defibrillators should
consult the manufacturer of the
device for information about its
operation under the influence of
radio waves.
Radio waves could have unexpected effects on the operation
of such medical devices.
Conditions displayed with
Wi-Fi® icon
The condition of Wi-Fi® connection appears on the right upper
side of the screen. (P.16)
Specifications
 Communication standards
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n (2.4GHz)
 Security
WPA™
WPA2™
• WPA™ and WPA2™ are trademarks of Wi-Fi Alliance®.
2
Basic function
the Wi-Fi® Hotspot function, the
communication speed may
decrease.
● If the vehicle is near a radio
antenna, radio station or other
source of strong radio waves and
electrical noise, communication
may be slow or impossible.
51
52
2-2. Connectivity settings
Apple CarPlay*
*:
3 Select “Always Enable” or
“Enable Once”.
This function is not made available in some countries or areas.
Apple CarPlay allows some
applications, such as Map,
Phone, and Music, to be
used on the system.
When an Apple CarPlay
connection is established,
Apple CarPlay compatible
applications will be displayed on the system display.
 Compatible device
Apple iPhone (iOS Ver. 9.3 or
later) that supports Apple CarPlay.
For details, refer to
https://www.apple.com/ios/
carplay/.
 If “Do Not Enable” is selected,
an Apple CarPlay connection
will not be established. In this
case, the device can be operated as a normal Apple
device, such as an iPod.
 Depending on the device connected, it may take approximately 3 to 6 seconds before
an Apple CarPlay connection
is established.
4 Check that home screen of
Apple CarPlay is displayed.
Establishing an Apple
CarPlay connection
1 Enable Siri on the device to
be connected.
2 Connect the device to the
USB port. (P.120)
A Select to display the home
screen of Apple CarPlay.
Touch and hold to activate
Siri.
B Select to start the application.
User can use any iPhone
application supported by
Apple CarPlay.
2-2. Connectivity settings
C Select to display the system
screen.
● When an Apple CarPlay connec-
played information is based on the
information in the map application,
so it may differ from the speed
limit information displayed on the
multi-information display.
2
Basic function
tion is established, the function of
some system buttons will change.
● When an Apple CarPlay connection is established, some system
functions, such as the following,
will be replaced by similar Apple
CarPlay functions or will become
unavailable:
• iPod (Audio Playback)
• Hands-free Phone
• USB audio/USB video
• Bluetooth® audio
• Bluetooth® phone
• Toyota Entune App Suite Connect
● The guidance volume can be
changed on the voice settings
screen. (P.60)
● To disable Apple CarPlay while a
device is connected, set “Apple
CarPlay” on the general settings
screen to off. (P.56)
● Apple CarPlay is an application
developed by Apple Inc. Its functions and services may be terminated or changed without notice
depending on the connected
device’s operation system, hardware and software, or due to
changes in Apple CarPlay specifications.
● If the vehicle’s navigation system
is being used for route guidance
and a route is set using the Apple
CarPlay Maps app, route guidance will be performed through
Apple CarPlay.
If the Apple CarPlay Maps app is
being used for route guidance and
a route is set using the vehicle’s
navigation system, route guidance
will be performed by the vehicle’s
navigation system.
● In some regions, speed limit information is displayed on the route
guidance screen of the iOS 11 or
later map application. The dis-
53
● Use of the Apple CarPlay logo
means that a vehicle user interface meets Apple performance
standards. Apple is not responsible for the operation of this vehicle
or its compliance with safety and
regulatory standards. Please note
that the use of this product with
iPhone or iPod may affect wireless performance.
● Apple, iPad, iPhone, iPod, and
iPod touch are trademarks of
Apple Inc., registered in the U.S.
and other countries. Apple CarPlay is a trademark of Apple Inc.
WARNING
● Do not connect iPhone or oper-
ate the controls while driving.
NOTICE
● Do not leave your iPhone in the
vehicle. In particular, high temperatures inside the vehicle
may damage the iPhone.
● Do not push down on or apply
unnecessary pressure to the
iPhone while it is connected as
this may damage the iPhone or
its terminal.
● Do not insert foreign objects into
the port as this may damage the
iPhone or its terminal.
54
2-2. Connectivity settings
Troubleshooting
If you are experiencing difficulties with Apple CarPlay, check the following table.
Symptom
Solution
Check if the device supports Apple CarPlay.
Check if Apple CarPlay is enabled on the connected device.
For details, refer to
https://www.apple.com/ios/carplay/.
Check if “Apple CarPlay” on the general settings screen is set to on. (P.56)
An Apple CarPlay connecCheck if the Lightning cable being used is certition cannot be estabfied by Apple Inc., and if it is securely conlished.
nected to the device and USB port.
When the iPhone is connected using a USB
hub, etc., an Apple CarPlay connection may not
be established. Connect the lightning cable to
USB the port directly.
After checking all of the above, try to establish
an Apple CarPlay connection. (P.52)
When an Apple CarPlay
connection is established
As the system is not designed to play video
and a video is being
through Apple CarPlay, this is not a malfuncplayed, the video is not
tion.
displayed, but audio is
output through the system.
Although an Apple CarPlay connection is estab- The system may muted or the volume may be
lished, audio is not output low. Increase the system volume.
through the system.
2-2. Connectivity settings
Symptom
55
Solution
After checking all of the above, try to establish
an Apple CarPlay connection. (P.52)
The map display of the
Apple CarPlay Maps app
cannot be enlarged or
contracted with pinch
multi-touch gestures.
As the Apple CarPlay Maps app is not compatible with pinch multi-touch gestures, this is not a
malfunction.
2
Basic function
Check if the Lightning cable being used to connect the device to the system is damaged.
To check if the Lightning cable is damaged
The Apple CarPlay screen internally, connect the device to another syshas artifacts and/or audio tem, such as a PC, and check if the device is
from Apple CarPlay has
recognized by the connected system. (The
noise.
device should begin charging when connected.)
56
2-3. Other settings
General settings
2-3.Other settings
Settings are available for
clock, operation sounds,
etc.
Displaying the general
settings screen
1 Press the “MENU” button.
daylight saving time, automatic
adjustment of the clock, etc.
(P.57)
 “Language”
Select to change the language. The
language setting of Apple CarPlay
can only be changed on the connected iPhone.
 “Customize Home Screen”
Select to change the display information/area on the home screen
and the home screen layout.
(P.29)
 “Theme Setting”
Select to change the screen theme
setting.
 “Apple CarPlay”*2
2 Select “Setup”.
 If the general settings screen
is not displayed, select “General”.
3 Select the desired items to
be set.
Select to turn automatic Apple CarPlay connection establishment
on/off when a compatible iPhone is
connected to the system via USB.
(P.52)
This setting cannot be changed
when a device is connected to the
system via USB. Disconnect the
device before attempting to change
the setting.
 “Beep”
Select to turn the beep sound
on/off.
 “Unit of Temperature”*1
Select to change the unit of temperature.
General settings screen
 “Clock”
Select to change the time zone and
select “On” or “Off” or “Auto”*1 for
 “Units of Measurement”
Select to change the unit of measure for distance/fuel consumption.
 “Auto Change to Screen”*1
Select to set automatic screen
2-3. Other settings
changes from the audio control
screen to the home screen to
on/off. When set to on, the screen
will automatically return to the
home screen from the audio control
screen after 20 seconds.
mation. Notices related to third
party software used in this product
are enlisted. (This includes instructions for obtaining such software,
where applicable.)
 “SW Sensitivity Level”
Select to change the keyboard layout.
Select to change the capacitive
touch screen button sensitivity to 1
(low), 2 (medium), or 3 (high).
 “Delete Keyboard History”
*1: Entune
Select to delete the keyboard history.
*2
: This function is not made available in some countries or areas.
 “Memorize Keyboard History”
*3
: Vehicles equipped with DCM
Select to set the memorize keyboard history on/off.
 “Animation”
Premium Audio only
Clock settings
Select to turn the animations on/off.
1 Display the general settings
screen. (P.56)
 “Driver Setting”
2 Select “Clock”.
Select to change the driver settings. (P.58)
3 Select the desired items to
be set.
 “Delete Personal Data”
Select to delete personal data.
(P.59)
 “Software Update”
Select to update software versions.
For details, contact your Toyota
dealer.
 “Software Update Setting”*2, 3
Select to set software update setting. (P.59)
 “Gracenote Database
Update”
Select to update Gracenote® database versions. For details, contact
your Toyota dealer.
 “Software Information”
Select to display the software infor-
2
A Select to change the time
zone. (P.58)
B Select to set daylight saving
time on/off/auto*.
C Select to set automatic
adjustment of the clock by
GPS on/off.
When set to off, the clock can
be manually adjusted.
Basic function
 “Keyboard Layout”
57
58
2-3. Other settings
(P.58)
D Select to set the 24 hour time
format on/off.
When set to off, the clock is
displayed in 12 hour time format.
*
: Entune Premium Audio only
Setting the time zone
1 Select “Time Zone”.
2 Select the desired time zone.
 Entune Premium Audio only:
If “Auto” is selected, the time
zone is selected automatically
by current vehicle position.
Manual clock setting
When “Auto Adjust by GPS” is
turned off, the clock can be
manually adjusted.
1 Select “Auto Adjust by GPS”
to set to off.
set the time back one minute.
C Select to round to the nearest
hour.
e.g.
1:00 to 1:29  1:00
1:30 to 1:59  2:00
D Select to set the time as AM
or PM when the clock is in 12
hour time format.
Driver settings
The driver settings feature will
allow the system to link some
preferences (such as audio presets, screen theme, language,
etc.) to a paired Bluetooth®
phone.
1 Display the general settings
screen. (P.56)
2 Select “Driver Setting”.
3 Select “Enable This Feature”.
2 Adjust the clock manually.
Manually select linked settings
A Select “+” to set the time for-
ward one hour and “-” to set
the time back one hour.
B Select “+” to set the time for-
ward one minute and “-” to
1 Select “Manually Select
Linked Settings”.
2-3. Other settings
2 Select the desired phone.
Deleting personal data
Registered or changed personal settings will be deleted or
returned to their default conditions.
1 Display the general settings
screen. (P.56)
available in some countries or
areas.
When the automatic update
check function is enabled, if a
software update is available
from the Toyota Entune center, a
message will be displayed.
1 Display the general settings
screen. (P.56)
2 Select “Software Update Setting”.
3 Select “Automatic Update
Check” to enable/disable the
automatic update check function.
2 Select “Delete Personal
Data”.
3 Select “Delete”.
4 Select “Yes” when the confirmation screen appears.
Examples of settings that can be
returned to their default conditions:
 Navigation settings*
 Audio settings
 Phone settings
etc.
*
: Entune Premium Audio only
Software update settings*
*
: Vehicles with equipped DCM
only. This function is not made
● When software update information
is displayed, contact your Toyota
dealer.
2
Basic function
 After a few seconds, loaded
screen automatically switches
to the home screen.
59
60
2-3. Other settings
Voice settings
Voice volume, etc. can be
set.
Displaying the voice settings screen
1 Press the “MENU” button.
A Select to adjust the volume of
voice guidance.
B Select to set the voice guid-
ance during route guidance
on/off.*1
C Select to set the voice guid-
ance during audio/visual system use on/off.*1
2 Select “Setup”.
3 Select “Voice”.
4 Select the desired items to
be set.
Voice settings screen
D Select to set the voice recog-
nition prompts.
E Select to train voice recogni-
tion.
The voice command system
adapts the user accent.
F Select to start the voice rec-
ognition tutorial.
G Select to set the beep sound
of navigation guidance.*1
H Select to set the voice
prompt interrupt on/off.
I Select to set the web search
engine. The search engines
are Toyota Entune App Suite
Connect applications. This
item is displayed when two or
more POI search applications are installed.*1,2
(P.215)
2-3. Other settings
J Select to reset all setup
items.
*1
: Entune Premium Audio only
*2: This
function is not made available in some countries or areas.
61
Vehicle settings
Settings are available for
maintenance, vehicle customization, etc.
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Vehicle”.
4 Select the desired items to
be set.
Vehicle settings screen
A Select to set maintenance.*1
(P.62)
B Select to set vehicle customi-
zation.*2
Basic function
Displaying the vehicle
settings screen
2
62
2-3. Other settings
C Select to set valet mode.
(P.63)
D Select to set dealer informa-
tion.*3, 4
*1
: Entune Premium Audio only
*2: Refer
to the “OWNER’S MAN-
UAL”
part or component. (P.62)
C Select to add a reminder
other than the provided ones.
D Select to cancel all reminders
which have been entered.
E Select to reset all reminders
which have expired.
*3
: Entune Audio Plus with DCM
only
F Select to call the registered
*4
: This function is not made available in some countries or areas.
G Select to register/edit dealer
Maintenance*
*
: Entune Premium Audio only
When the system is turned on,
the maintenance reminder
screen displays when it is time
to replace a part or certain components. (P.26)
1 Display the vehicle settings
screen. (P.61)
dealer.
information. (P.63)
● When the vehicle needs to be ser-
viced, the screen button color will
change to orange.
Maintenance information
setting
1 Select the desired part or
component screen button.
2 Set the conditions.
2 Select “Maintenance”.
3 Select the desired item.
A Select to enter the next main-
tenance date.
A The system is set to give
maintenance information with
the maintenance reminder
screen. (P.26)
B Select to set a reminder for a
B Select to enter the driving
distance until the next maintenance check.
C Select to cancel the condi-
tions which have been
entered.
2-3. Other settings
D Select to reset the conditions
which have expired.
3 Select “OK” after entering the
conditions.
mation, refer to “Scheduled Maintenance Guide” or “Owner’s
Manual Supplement”.
● Depending on driving or road conditions, the actual date and distance that maintenance should be
performed may differ from the
stored date and distance in the
system.
Dealer setting
Dealer information can be registered in the system. With dealer
information registered, route
guidance to the dealer is available.
1 Select “Set Dealer”.
2 Select the desired item to
search for the location.
(P.80)
 The editing dealer screen
appears after setting the location.
3 Select the desired items to
be edited.
dealer. (P.63)
B Select to enter the name of a
dealer member. (P.63)
C Select to set the location.
(P.63)
D Select to enter the phone
number. (P.63)
E Select to delete the dealer
information displayed on the
screen.
F Select to set the displayed
dealer as a destination.
(P.87)
Editing dealer or contact
name
1 Select “Dealer” or “Contact”.
2 Enter the name and select
“OK”.
Editing the location
1 Select “Location”.
2 Scroll the map to the desired
point (P.72) and select
“Enter”.
Editing phone number
1 Select “Phone #”.
2 Enter the phone number and
select “OK”.
Setting the valet mode
A Select to enter the name of a
2
The security system can be set
to on by entering a security code
Basic function
● For scheduled maintenance infor-
63
64
2-3. Other settings
(4-digit number).
When set to on, the system will
become inoperative once the
electrical power source is disconnected until the security
code is entered.
1 Display the vehicle settings
screen. (P.61)
2 Select “Valet Mode”.
3 Enter the 4-digit personal
code and select “OK”.
4 Enter the same 4-digit personal code again and select
“OK”.
 The system will request that
you input the security code
again to confirm that you
remember it correctly.
Setting dealer information*
*
: Entune Audio Plus with DCM
only. This function is not made
available in some countries or
areas.
Dealer information can be registered in the system. If the vehicle alert screen is displayed,
selecting the call dealer button
on the screen will call the phone
number registered in the dealer
information.
1 Display the vehicle settings
screen. (P.61)
2 Select “Dealer Info”.
3 Select the desired items to
be edited.
 When valet mode activates,
the system stops and a security code (4-digit number)
standby screen is displayed.
● If the 4-digit personal code is for-
gotten, please contact your Toyota
dealer.
If the valet mode has been
activated
1 Enter the 4-digit personal
code and select “OK”.
● If an incorrect security code (4-
digit number) is entered 6 times,
the system will not accept another
security code (4-digit number) for
10 minutes.
A Select to enter the name of a
dealer. (P.65)
B Select to enter the name of a
dealer member. (P.65)
C Select to enter the phone
number. (P.65)
D Select to delete the dealer
information displayed on the
screen.
2-3. Other settings
65
Editing dealer or contact
name
1 Select “Edit” next to “Dealer”
or “Contact”.
Editing phone number
1 Select “Edit” next to “Phone
#”.
2 Enter the phone number and
select “OK”.
Basic function
2 Enter the name and select
“OK”.
2
66
2-3. Other settings
67
Navigation system
3
3-1. Basic operation
Navigation ......................68
Map screen operation ....70
Traffic information ..........77
3-2. Destination search
Destination search operation ...............................80
Starting route guidance .. 87
3-3. Route guidance
Route guidance screen ..91
Typical voice guidance
prompts ........................95
Editing route ...................95
3-4. Setup
Navigation settings.........98
Detailed navigation settings
.................................. 103
Traffic settings............. 107
Use of information accumulated by navigation system
(Vehicles equipped with
DCM)......................... 111
3-5. Tips for the navigation
system
GPS (Global Positioning
System) ..................... 112
Map database version and
covered area ............. 114
Navigation system
Map screen information .72
3
68
3-1. Basic operation
Navigation*
3-1.Basic operation
*
: Entune Premium Audio only
The navigation system indicates your present position and
assists in locating a desired destination. To display the map
screen, press the “MAP” button.
Map screen overview
A 2D north up, 2D heading up or 3D heading up symbol (P.71)
Indicates whether the map orientation is set to north-up or heading-up. The letter(s) under this symbol indicate the vehicle’s
heading direction (e.g. N for north). In 3D map, only a heading-up
view is available.
B Destination button (P.80)
Select to display the destination screen.
C Map options button (P.72)
Select to display the map options screen.
D Route options button (P.95)
Select to display the route options screen.
E Mute button
3-1. Basic operation
69
Select to mute the voice guidance. When set to on, the indicator
will illuminate.
F Zoom in/out button (P.70)
Select to magnify or reduce the map scale. When either button is
selected, the map scale indicator bar appears at the bottom of the
screen.
G Micro city map button (P.70)
H Route information bar (P.91)
Displays the distance with the estimated travel time/arrival time to
the destination. The route information bar fills from left to right as
the vehicle progresses on the route.
I Delete destination button (P.22)
Select to delete destinations.
J Speed limit icon (P.72)
Indicates the speed limit on the current road. The display of the
speed limit icon can be set to on/off.
● When the vehicle is not receiving
GPS signals, such as when driving in a tunnel,
will be
displayed at the bottom left corner
of the screen.
● Press the “MAP” button to display
the address of the current position
on the map screen or repeat voice
guidance.
Navigation system
Select to display the micro city map screen.
3
70
3-1. Basic operation
Map screen operation
Current position display
1 Press the “MAP” button.
Map scale
1 Select
or
to change
the scale of the map screen.
● The scale indicator bar appears at
the bottom of the screen.
2 Check that the current position map is displayed.
● Select and hold
 To correct the current position manually: P.105
● The scale of the map screen can
● While driving, the current position
mark is fixed on the screen and
the map moves.
● The current position is automatically set as the vehicle receives
signals from the GPS (Global
Positioning System). If the current
position is not correct, it is automatically corrected after the vehicle receives signals from the GPS.
● After the 12-volt battery disconnection, or on a new vehicle, the
current position may not be correct. As soon as the navigation
system receives signals from the
GPS, the correct current position
is displayed.
or
to continue changing the scale of the
map screen.
also be changed by selecting the
scale bar directly. This function is
not available while driving.
● Pinch outward on the screen to
zoom in and pinch inward to zoom
out.
● In areas where a micro city map is
available,
will change to
when the map screen is set
to the smallest scale.
Micro city map
For areas covered by the micro
city map (some major cities), a
micro city map on a scale of 75
ft. (25 m) can be selected.
When the map is scaled down to
150 ft. (50 m),
changes to
and can be selected to
display the micro city map.
3-1. Basic operation
1 Select
screen.
on the map
2 Check that the micro city
map is displayed.
71
: Heading-up symbol
The direction of vehicle travel is
always up.
: 3D Heading-up symbol
The direction of vehicle travel is
always up.
Map scroll operation
● To return to the normal map dis-
play, select
.
● If the map or the current position
is moved to the area which is not
covered by the micro city map, the
screen scale automatically
changes to 150 ft. (50 m).
● On the micro city map, a one way
street is displayed by
.
The map can be scrolled to view
locations that are different than
your current position.
1 Select the desired point on
the map screen.
 Move the desired point on the
center of the map screen.
● Scrolling the micro city map is not
available while driving.
● Certification
Building micro cities in the database
were created and provided by
HERE.
Orientation of the map
The orientation of the map can
be changed between 2D northup, 2D heading-up and 3D
heading-up by selecting the orientation symbol displayed at the
top left of the screen.
: North-up symbol
Regardless of the direction of
vehicle travel, north is always
up.
A Cursor mark
B Distance from the current
position to the cursor mark
C Select to register as a mem-
ory point. To change the icon,
name, etc.: P.98
D Select to set as a destination.
(P.87)
 The map screen can be
3
Navigation system
 The letter(s) under this symbol indicate the vehicle’s
heading direction (e.g. N for
north).
72
3-1. Basic operation
scrolled by touching, dragging
or flicking it. (P.27)
 Press the “MAP” button to
return to the current position.
Adjusting location in
small increments
The cursor location can be
adjusted in small increments. 8
directional arrows may appear
in the following cases.
• When “Adjust Location” is
selected on the map screen
• When changing the location
of memory points on the editing screen (P.98, 99, 101)
• When adjusting the current
position mark manually on the
calibration screen (P.105)
1 Select one of the 8 directional arrows to move the
cursor to the desired point
and then select “OK”.
Map screen information
Information such as POI
icons, route trace, speed
limit, etc. can be displayed
on the map screen.
Displaying the map
options screen
1 Select
on the map
screen. (P.68)
2 Select the desired items to
be displayed.
A Select to display the desired
map mode. (P.73)
B Select to select or change
POI icons. (P.73)
C Select to display speed limit
icon.
D Select to display traffic infor-
3-1. Basic operation
mation.* (P.77)
E Select to display the predic-
tive efficient drive icons.
(P.75)
F Select to display route trace.
(P.76)
G Select to display the map
*
: This function is not made available in some countries or areas.
Switching the map mode
1 Select
on the map
screen. (P.68)
2 Select “Map Mode”.
exit list screen. (P.92)
F Select to display the intersec-
tion guidance screen or the
guidance screen on the freeway. (P.93)
G Select to display the turn-by-
turn arrow screen. (P.94)
 Depending on the conditions,
certain screen configuration
buttons cannot be selected.
Dual map
The map on the left is the main
map. The right side map can be
edited.
1 Select any point on the right
side map.
3 Select the desired configuration button.
2 Select the desired item.
A Select to display the single
map screen.
B Select to display the dual
map screen. (P.73)
C Select to display the com-
pass mode screen. (P.74)
D Select to display the turn list
screen. (P.94)
E Select to display the freeway
A Select to change the orienta-
tion of the map. (P.71)
B Select to display POI icons.
3
Navigation system
version and coverage area.
(P.114)
73
74
3-1. Basic operation
(P.74)
C Select to show traffic infor-
3 Select the desired POI category and select “OK”.
mation.* (P.77)
D Select to change the map
scale. (P.70)
*
: This function is not made available in some countries or areas.
3 Select “OK”.
Compass
Information about the destination, current position and a compass are displayed on the
screen.
● The destination mark is displayed
in the direction of the destination.
When driving, refer to the longitude and latitude coordinates, and
the compass, to make sure that
the vehicle is headed in the direction of the destination.
● When the vehicle travels out of
the coverage area, the guidance
screen changes to the whole compass mode screen.
Selecting the POI icons
1 Select
on the map
screen. (P.68)
2 Select “POI Icons”.
A Displays up to 5 selected POI
icons on the map screen.
B Select to cancel the selected
POI icons.
C Displays up to 6 POI icons as
favorite POI categories.
(P.105) If a POI category is
selected to be displayed on
the map, its icon will be displayed above.
D Select to display other POI
categories if the desired POIs
cannot be found on the
screen.
E Select to search for the near-
est POIs. (P.75)
Selecting other POI icons to
be displayed
1 Select “Other POIs”.
2 Select the desired POI categories and select “OK”.
“List All Categories”: Select to
display all POI categories.
3-1. Basic operation
Displaying the local POI list
POIs that are within 20 miles (32
km) of the current position will
be listed from among the
selected categories.
1 Select “Around Me”.
2 Select the desired POI.
 Select “Near Here” to search
for POIs near the current
position.
 Select “Along My Route” to
search for POIs along the
route.
3 Check that the selected POI
is displayed on the map
screen.
Displaying predictive efficient drive information
The icon for the predictive
deceleration support point can
be displayed on the map.
1 Select “Predictive Efficient
Drive”.
 The “Predictive Efficient
Drive” indicator illuminates.
 The
icon is displayed on
the map for the predictive
deceleration support points.
Also, when the position of the
vehicle approaches the predictive deceleration support
point, the icon changes to an
icon.
The predictive efficient drive function can be turned on/off. (P.103)
● Up to 100 icons can be displayed
on one screen.
● When the maximum number of
icons that can be displayed is
exceeded, the predictive efficient
drive points near the position of
the vehicle are displayed.
● Icons for the predictive efficient
drive points can be displayed on
maps more detailed than 0.75
miles. (excluding the city map)
● When a destination is set, predictive deceleration support points
not along the guided route are not
emphasized.
Turning off the predictive
efficient drive information
display
1 Select “Predictive Efficient
Drive”.
 The “Predictive Efficient
Drive” indicator dims.
 After the “Predictive Efficient
Drive” function is turned off,
the screen to confirm whether
to clear the predictive efficient
drive point information is displayed. To keep the points
(only remove the display
icon), select “Yes”. To clear
registered points, select “No”.
● Once the predictive deceleration
support point information is
cleared, it cannot be restored.
● The predictive deceleration support point information cannot be
selected and individually cleared.
3
Navigation system
“Sort/Search Area”: Select to
sort (distance, name, category)
POIs or search area.
emphasized
75
76
3-1. Basic operation
Route trace
The traveled route can be stored
and retraced on the map screen.
This feature is available when
the map scale is 30 miles (50
km) or less.
Start recording the route
trace
1 Select
on the map
screen. (P.68)
2 Select “Route Trace”.
 The route trace starts.
3 Check that the traveled line is
displayed.
Stop recording the route
trace
1 Select
on the map
screen. (P.68)
2 Select “Route Trace” again.
3 A confirmation screen will be
displayed.
“Yes”: Select to keep the recorded
route trace.
“No”: Select to erase the recorded
route trace.
● The traveled route can be stored
up to approximately 621 miles
(1000 km).
Displaying information
about the icon where the
cursor is set
When the cursor is placed over
an icon on the map screen, the
name is displayed at the top of
the screen. If “Info” is shown to
the right of the name, detailed
information can be displayed.
1 Place the cursor over an
icon.
2 Select “Info”.
3 Check that the information
screen is displayed.
“Save”: Select to register as
a memory point. To change
the icon, name, etc.: P.98
“Go”/“Enter”: Select to set as
a destination.
: Select to call the registered number.
“Delete”: Select to delete
destination or memory point.
“Edit”: Select to display the
edit memory point screen.
● Even when traffic information is
not currently being received, traffic
information and “Info” will be dis-
3-1. Basic operation
played for a while after traffic information has been received.
● In some situations, calls to a POI
may automatically change to an
international call or may not be
possible as a domestic call.
Standard map icons
Name
Park/Recreation
Business facility
Airport
Military
Traffic information*
*:
This function is not made available in some countries or areas.
Traffic data can be received
via HD Radio broadcast or
via DCM (Data Communication Module) to display traffic information on the map
screen.
Displaying the traffic incidents screen
1 Press the “MENU” button.
University
Hospital
Stadium
Shopping
Golf course
2 Select “Info”.
3 Select “Traffic Incidents”.

When the route has not been
set
A Select to display traffic infor-
mation for the current road.
(P.78)
3
Navigation system
Icon
77
78
3-1. Basic operation
B Select to display nearby traf-
Displaying traffic information
fic information. (P.78)
C Select to display a map with
predictive traffic data.
(P.78)
D Select to display traffic along
the saved routes. (P.79)

When the route has been set
A list of current traffic information can be displayed along with
information on the location of
each incident.
1 Display the traffic incidents
screen. (P.77)
2 Select “Traffic Events on Current Road”, “Traffic Events on
Current Route” or “Traffic
Events Nearby”.
3 Select the desired traffic
information.

A Select to display traffic infor-
mation for the set route.
(P.78)
B Select to display nearby traf-
fic information. (P.78)
C Select to display a map with
predictive traffic data.
(P.78)
D Select to display traffic along
the saved routes. (P.79)
● If a large amount of information is
being received, it may take longer
than normal for the information to
be displayed on the screen.
● If traffic information cannot be
received because the vehicle is
outside of HD Radio coverage
area, it may still be able to be
received using DCM. (P.170)
When “Traffic Events Nearby”
is selected, depending on
whether the traffic flow information is enabled/disabled,
the following will be displayed:
When enabled: Traffic event and
congestion information
When disabled: Traffic event information only
4 Check that the traffic information is displayed.
“Detail”: Select to display detailed
traffic information.
Displaying predictive traffic information
A map with predictive traffic data
can be displayed.
1 Display the traffic incidents
screen. (P.77)
2 Select “Predictive Traffic
Map”.
3-1. Basic operation
3 Scroll the map to the desired
point (P.71) and set the
time of predictive traffic information.
 The time of the predictive traffic information can be
changed in 15-minute intervals up to +45 minutes.
“>”: Moves the time back 15 minutes.
My traffic routes
Traffic information along the
saved routes can be displayed.
To use this function, it is necessary to register a route.
(P.108)
1 Display the traffic incidents
screen. (P.77)
2 Select “My Traffic Routes”.
 If map data has been
updated, a confirmation
screen will be displayed.
Select “OK” or “Do Not Tell
Me Again”.
3 Select the desired route.
“Options”: Select to add, edit or
delete personal traffic routes.
(P.108)
 If routes have not been registered yet, a confirmation
screen will be displayed.
Select “Yes” to register the
route.
4 Select the desired traffic
information.
5 Check that the traffic information is displayed.
“Detail”: Select to display detailed
traffic information.
Displaying traffic information on the map
1 Select
screen.
on the map
2 Select “Traffic Information”.
3 Check that the traffic information is displayed.
● The icons indicate traffic incidents
such as construction, accidents,
etc. Select an icon to hear more
detail by voice.
● The arrows indicate the flow of
traffic. The color changes depending on the speed.
3
Navigation system
“<”: Moves the time forward 15 minutes.
79
80
3-2. Destination search
home. (P.81)
Destination search
operation
3-2.Destination search
B Select to search for a desti-
nation by entering keywords.
(P.81)
Destination screen
C Select to search for a desti-
The destination screen enables
to search for a destination. The
destination screen can be
reached by the following methods:
nation from a registered entry
in “Favorites”. (P.81)
D Select to search for a desti-
nation via the Toyota Entune
center.* (P.219)
■ From the map screen
1 Press the “MAP” button.
2 Select
E Select to search for a desti-
nation from recent set destinations. (P.82)
.
3 Follow the steps in “From the
menu screen” from step 3.
(P.80)
■ From the menu screen
1 Press the “MENU” button.
F Select to search for a desti-
nation from emergency service points. (P.82)
G Select to search for a desti-
nation from contact data
which had been transferred
to the navigation system from
a registered Bluetooth®
phone. (P.82)
2 Select “Destination”.
3 Select the desired search
method.
H Select to search for a desti-
nation by address. (P.83)
I Select to search for a desti-
nation by point of interest.
(P.83)
*
: This function is not made available in some countries or areas.
● To hide the destination screen,
touch any part of the map screen.
Selecting search area
A Select to set a destination by
The selected state (province)
can be changed to set a desti-
3-2. Destination search
nation from a different state
(province) by using “Address” or
“Point of Interest”.
1 Display the destination
screen. (P.80)
2 Select “Address” or “Point of
Interest”.
 If a state (province) has not
been selected yet, “Select
State/Province” is displayed.
4 Select the desired state
(province).
and the route overview is displayed. (P.88)
Searching by keyword
The destination can be
searched by entering various
keywords.
1 Display the destination
screen. (P.80)
2 Select “Search”.
3 Enter characters on the keyboard.
4 Select “Search”.
5 When there is more than 1
result, select the desired item
from the list.
: Select to display updated information about the selected entry.
(Vehicles equipped with DCM)
● To search for a facility name using
 To change countries, select
“United States”, “Canada” or
“Mexico”.
multiple search words, put a
space between each word.
● Search results may differ depending on the Toyota Entune subscription status and
communication status.
Setting home as destination
Searching by favorites list
To use this function, it is necessary to register a home address.
(P.98)
1 Display the destination
screen. (P.80)
2 Select
.
 The navigation system performs a search for the route
To use this function, it is necessary to register a favorites list
entry. (P.99)
1 Display the destination
screen. (P.80)
2 Select “Favorites”.
3 Select the desired favorites
list entry.
3
Navigation system
3 Select “Select State/Province” or “Change State/Province”.
81
82
*
3-2. Destination search
Searching by Destination
Assist Connect*
“Sort/Delete All”: Select to sort
(date, name) destinations or delete
all.
: This function is not made available in some countries or areas.
Searching by emergency
A Destination Assist operator
can search for a destination.
You can request a specific business, address, or ask for help
locating your desired destination. (P.219)
1 Display the destination
screen. (P.80)
2 Select “Dest Assist”.
Searching by recent destinations
1 Display the destination
screen. (P.80)
1 Display the destination
screen. (P.80)
2 Select “Emergency”.
3 Select the desired emergency category.
4 Select the desired destination.
● The navigation system does not
guide in areas where route guidance is unavailable. (P.112)
Searching by contact
“Sort/Delete”: Select to sort (date,
name) or delete destination(s).
To use this function, it is necessary to have contact data which
had been transferred to the navigation system from a registered
Bluetooth® phone. (P.178)
1 Display the destination
screen. (P.80)
● Up to 100 previously set destina-
2 Select “Contacts”.
2 Select “Recent”.
3 Select the desired destination.
tions are displayed on the screen.
Deleting recent destinations
1 Select “Sort/Delete”.
2 Select “Delete Recent Destinations”.
3 Select the desired recent
destination(s) to be deleted.
4 Select “Yes” when the confirmation screen appears.
3 Select the desired contact.
4 Select “Addresses”.
5 Select the desired address.
6 Follow the steps in “Searching by keyword” from step 4.
(P.81)
● This function may not be available
depending on the type of Bluetooth® phone.
3-2. Destination search
Searching by address
There are 2 methods to search
for a destination by address.
1 Display the destination
screen. (P.80)
2 Select “Address”.
6 Enter a house number and
select “Search”.
 If multiple locations with the
same address exist, the
address list screen will be displayed. Select the desired
address.
Searching by street
address
1 Select “Street Address”.
2 Enter a house number and
select “Search”.
3 Enter a street name and
select “Search”.
A Select to change the search
area. (P.80)
B Select to search by city.
(P.83)
C Select to search by street
address. (P.83)
Searching by city
1 Select “City”.
2 Enter a city name and select
“Search”.
“Last 5 Cities”: Select the
desired city name from the list of
the last 5 cities.
3 Select the desired city name.
4 Enter a street name and
select “Search”.
5 Select the desired street
name.
4 Select the desired street
name.
5 Enter a city name and select
“Search”.
6 Select the desired city name.
 If multiple locations with the
same address exist, the
address list screen will be displayed. Select the desired
address.
● A street name can be searched
using only the body part of its
name.
For example: S WESTERN AVE
• A search can be performed by
entering “S WESTERN AVE”,
“WESTERN AVE” or “WESTERN”.
Searching by point of
interest
There are 3 methods to search
3
Navigation system
3 Select the desired search
method.
83
84
3-2. Destination search
for a destination by Points of
Interest.
1 Display the destination
screen. (P.80)
2 Select “Point of Interest”.
3 Select the desired search
method.
displayed. Select the desired
POI.
● To search for a facility name using
multiple search words, put a
space between each word.
Selecting a city to search
1 Select “Sort/Category/City”.
2 Select “Enter a city name”.
3 Enter a city name and select
“Search”.
“Any City”: Select to cancel the city
setting.
4 Select the desired city name.
A Select to change the search
5 Select the desired POI.
area. (P.80)
B Select to search by name.
(P.84)
C Select to search by category.
(P.84)
D Select to search by phone
Selecting from the categories
1 Select “Sort/Category/City”.
2 Select “Change POI category”.
number. (P.85)
3 Select the desired category.
Searching by name
 If there is more than 1 result
for the selected category, a
detailed list will be displayed.
1 Select “Name”.
2 Enter a POI name and select
“Search”.
3 Select the desired POI.
“Sort/Category/City”: Select to sort
(name, distance) the displayed
entries, change the POI category,
or enter a city name.
 When entering the name of a
specific POI, and there are 2
or more sites with the same
name, the list screen will be
“List All Categories”: Select to display all POI categories.
4 Select the desired POI.
Searching by category
1 Select “Category”.
3-2. Destination search
2 Select the desired search
point.
85
be displayed. They are displayed
up to 200 names.
When “Near a City Center in
XX*” is selected
1 Select “Near a City Center in
XX*”.
A Select to search for POIs
near your current position.
B Select to search for POIs
along the set route.
C Select to search for POIs
near a specific city center.
(P.85)
D Select to search for POIs
near a destination.
When more than 1 destination has been set, a list will
be displayed on the screen.
Select the desired destination.
3 Select the desired POI category.
 If there is more than 1 result
for the selected category, a
detailed list will be displayed.
“List All Categories”: Select to display all POI categories.
“Favorite POI Categories”: Select to
use the 6 POIs that have been previously set. (P.105)
4 Select the desired POI.
● The names of POIs located within
approximately 200 miles (320 km)
from the selected search point can
“Last 5 Cities”: Select the desired
city name from the list of the last 5
cities.
3 Select the desired city name.
4 Select “OK” when the city
center map screen is displayed.
5 Follow the steps in “Searching by category” from step 3.
(P.84)
*
: XX represents the selected
search area name.
● If the navigation system has never
been used, selecting the city
name from “Last 5 Cities” will not
be available.
Searching by phone number
1 Select “Phone #”.
2 Enter a phone number and
select “OK”.
 If multiple locations with the
same phone number exist,
the list screen will be displayed.
● If there is no match for the entered
phone number, a list of identical
Navigation system
2 Enter a city name and select
“Search”.
3
86
3-2. Destination search
numbers with different area codes
will be displayed.
One-touch setting
home/favorite as a destination
To use this function, it is necessary to register a home and/or a
favorite location. Up to 2 favorites can be registered as preset
destinations. (P.98, 99)
To set the home or a preset destination as the destination,
select the corresponding button.
1 Turn the engine switch
<power switch> to ACC or
ON.
2 Press the “MAP” button.
3 Select the desired item.
A Select to set the registered
home as the destination.
B Select to set a registered
favorite as the destination.
(Up to 2 favorites can be registered as preset destinations.)
 The estimated time of arrival
to the registered home and
preset destinations from the
current position will be dis-
played.
 If the home or a preset destination has not been registered, “Save Home” or “Save
Favorite” will be displayed,
respectively. To register a
home or preset destination,
select the corresponding button.
● When the destination is very close
to the current position, “Nearby”
will be displayed.
● The one-touch buttons for home
and favorites will disappear after
the vehicle has been driven for a
while.
● The color of the estimated arrival
time indicator may change
depending on the traffic information received.
● This function is available when
“Automatic Destination List Info” is
set to on. (P.103)
3-2. Destination search
Starting route guidance
When the destination is set,
the confirm destination
screen will be displayed.
1 Select “Go” on the confirm
destination screen.
● Route guidance may not be avail-
able if there is no road data for the
specified location.
● When setting the destination on a
map with a scale more than 0.5
mile (800 m), the map scale
changes to 0.5 mile (800 m) automatically. If this occurs, set the
destination again.
● If a destination that is not located
on a road is set, the vehicle will be
guided to the point on a road nearest to the destination. The road
nearest to the selected point is set
as the destination.
WARNING
● Be sure to obey traffic regula-
tions and keep road conditions
in mind while driving. If a traffic
sign on the road has been
changed, the route guidance
may not indicate such changed
information.
 For details about this screen:
P.87
2 Select “OK” on the route
overview screen.
 For details about this screen:
P.88
● The route for returning may not be
the same as that for going.
● The route guidance to the destination may not be the shortest route
or a route without traffic congestion.
Confirm destination
screen
A Select to adjust the position
in smaller increments.
(P.72)
B Select to search for the route.
(P.87)
• If a destination has already been
set, “Go Directly” and “Add to
Route” will be displayed.
“Go Directly”: Select to delete the
3
Navigation system
Starting route guidance
87
88
3-2. Destination search
existing destination(s) and set a
new one.
“Add to Route”: Select to add a
destination to the current route.
C Select to register as a mem-
ory point.
D Select to call the registered
number.
E Select to update information
about the selected entry.*
*:
This function is displayed only
when there is information from
the Toyota Entune center.
(P.81)
Route overview screen
H Select to start guidance.
Select and hold to start demo
mode. (P.88)
I Displayed when the route
displayed is from the Toyota
Entune center. (P.90)
Starting demo mode
Before starting the route guidance, the demonstration of the
route guidance can be viewed.
1 Select and hold “OK” on the
route overview screen until a
beep sounds.
 Press the “HOME” or “MAP”
button to end demo mode.
3 routes selection
1 Select “3 Routes”.
2 Select the desired route.
A Current position
B Destination point
C Select to display a list of the
turns required to reach the
destination. (P.89)
D Select the desired route from
3 possible routes. (P.88)
E Select to change the route.
(P.89)
F Type of route and its distance
G Distance of the entire route
A Displayed when the route
displayed is available from
the Toyota Entune center.
(
)
B Select to display the quick-
est route.
C Select to display the route
that is the shortest distance
3-2. Destination search
to the set destination.
D Select to display the alterna-
89
2 Check that the turn list is displayed.
tive route.
E Select to display the informa-
tion about the 3 routes.
(P.89)
3
1 Select “Info”.
A Current position
2 Check that the 3 routes information screen is displayed.
B Distance to the next turn
C Turn direction at the intersec-
tion
D Select to display the map of
the selected point.
● Not all road names on the route
A Time necessary for the entire
trip
B Distance of the entire trip
may appear on the list. If a road
changes its name without requiring a turn (such as on a street that
runs through 2 or more cities), the
name change will not appear on
the list. The street names will be
displayed in order from the starting point, along with the distance
to the next turn or the destination.
C Distance of the toll road
D Distance of the freeway
E Distance of the ferry trip
Displaying turn list
A list of turn information from the
current position to the destination can be displayed.
1 Select “Turn List”.
Editing route
Destinations can be added,
reordered or deleted, and conditions for the route to the destination can be changed.
1 Select “Edit Route”.
Navigation system
Displaying 3 routes information
90
3-2. Destination search
2 Select the desired item.
set.
3 Select “Beginning” or “End”.
Deleting destinations
1 Select “Delete”.
2 Select “Yes” when the confirmation screen appears.
A Select to add destinations.
(P.90)
B Select to delete destinations.
(P.90)
C Select to reorder destina-
 If more than 1 destination has
been set, select the destination(s) to be deleted. (The
navigation system will recalculate route(s) to the remaining set destination(s).)
tions. (P.96)
A route from the Toyota
Entune center* (Vehicles
equipped with DCM)
D Select to set route prefer-
ences. (P.96)
Adding destinations
When the vehicle is stopped
1 Select “Add”.

2 Search for an additional destination in the same way as a
destination search. (P.80)
 Up to 5 destinations can be
set.
3 Select “Add Destination
Here” at the position in the
route which you want to add
the destination.
While driving
1 Select “Add”.

2 Search for an additional destination in the same way as a
destination search. (P.80)
 Up to 5 destinations can be
*:
This function is not made available in some countries or areas.
When starting route guidance or
rerouting, a route can be provided automatically by the Toyota Entune center. This function
is available when dynamic route
setting is enabled. (P.103)
3-3. Route guidance
Route guidance
screen
screen.
3-3.Route guidance
During the route guidance,
various types of guidance
screens can be displayed
depending on conditions.
91
● When the automatic zoom func-
Screen for route guidance
Distance and time to destination
When the vehicle is on the guidance route, the route information bar displays the distance
with the estimated travel/arrival
time to the destination.
A Distance to the next turn and
an arrow indicating the turning direction
B Guidance route
C Current position
D Select to mute the voice
When the set destination is 1
1 Select the route information
bar to change the display of
the route information bar
between the estimated travel
time and the estimated arrival
time.

guidance.
E Route information (P.91)
F Select to delete destinations.
(P.22)
● If the vehicle goes off the guid-
ance route, the route will be recalculated.
● For some areas, the roads have
not been completely digitized in
our database. For this reason, the
route guidance may select a road
that should not be traveled on.
● When arriving at the set destination, the destination name will be
displayed on the upper part of the
When the set destinations are
more than 1
1 Select the route information
bar.

3
Navigation system
tion is enabled, the map will automatically change to a detailed
map as the vehicle approaches a
guidance point. (P.104)
● Vehicle with head-up display:
When the head-up display is set
to on, turn-by-turn guidance
arrows will be displayed on the
windshield.
92
3-3. Route guidance
2 Check that the list of the distance and time is displayed.
A Distance from the current
 By selecting one of the number buttons, the desired route
information is displayed.
position to the freeway
exit/rest area
B Name of the freeway exit/rest
area
“Arrival Time”: Select to display the
estimated arrival time.
C POIs that are close to a free-
“Time to Dest.”: Select to display
the estimated travel time.
D Select to display the selected
way exit
map of the exit vicinity.
● When the vehicle is on the guid-
ance route, the distance measured along the route is displayed.
Travel time and arrival time are
calculated based on the average
speed of the specified speed limits
and current traffic information.
● When the vehicle gets off the
guidance route, the arrow facing
the destination is displayed
instead of the estimated
travel/arrival time.
● The route information bar fills from
left to right as the vehicle progresses along the route.
During freeway driving
During freeway driving, the freeway information screen can be
displayed.
E Select to display the nearest
freeway exits/rest areas from
the current position.
: Select to scroll to farther freeway exits/rest areas.
: Select to scroll to closer freeway exits/rest areas.
When approaching freeway exit or junction
When the vehicle approaches
an exit or junction, the freeway
guidance screen will be displayed.
3-3. Route guidance
93
• To return to the tollgate guidance
screen, press the “MAP” button.
C Remaining distance bar to
the guidance point
● This function is available when
“Intersection Zoom Map” is set to
on. (P.103)
B Distance from the current
position to the exit or junction
C Select to hide the freeway
guidance screen.
• To return to the freeway guidance
screen, press the “MAP” button.
When approaching junction
When the vehicle approaches a
junction, the junction view with
signage will be displayed.
D Remaining distance bar to
the guidance point
● This function is available when
“Intersection Zoom Map” is set to
on. (P.103)
When approaching tollgate
A Next junction or street name
When the vehicle approaches a
tollgate, the tollgate view will be
displayed.
• To return to the real freeway junction view, press the “MAP” button.
B Select to hide the real free-
way junction view.
C Distance from the current
position to the next junction
D Remaining distance bar to
the guidance point
● This function is available when
“Intersection Zoom Map” is set to
on. (P.103)
A Distance from the current
position to the tollgate
B Select to hide the tollgate
guidance screen.
When approaching intersection
When the vehicle approaches
Navigation system
A Next exit or junction name
3
94
3-3. Route guidance
an intersection, the intersection
guidance screen will be displayed.
A Turn direction
B Distance between turns
C Next street or destination
name
Turn-by-turn arrow screen
A Next street name
B Distance to the intersection
C Select to hide the intersection
guidance screen.
• To return to the intersection guidance screen, press the “MAP”
button.
On this screen, information
about the next turn on the guidance route can be displayed.
1 Select “Turn-by-Turn Arrow”
on the map mode screen.
(P.73)
2 Check that the turn-by-turn
arrow screen is displayed.
D Remaining distance bar to
the guidance point
● This function is available when
“Intersection Zoom Map” is set to
on. (P.103)
Turn list screen
1 Select “Turn List” on the map
mode screen. (P.73)
2 Check that the turn list
screen is displayed.
A Exit number or street name
B Turn direction
C Distance to the next turn
3-3. Route guidance
Typical voice guidance prompts
Editing route
Displaying the edit route
screen
1 Select
on the map
screen. (P.68)
2 Select the desired item to be
set.
● If a voice guidance command can-
not be heard, press the “MAP”
button to hear it again.
● To adjust the voice guidance volume: P.60
● To mute the voice guidance:
P.91
● Voice guidance may be made
early or late.
● If the navigation system cannot
determine the current position correctly, you may not hear voice
guidance or may not see the magnified intersection on the screen.
WARNING
● Be sure to obey the traffic regu-
lations and keep the road condition in mind especially when you
are driving on IPD roads (roads
that are not completely digitized
in our database). The route
guidance may not have the
updated information such as the
direction of a one way street.
A Select to display the over-
view of the entire route.
(P.88)
B Select to reorder destina-
tions. (P.96)
C Select to change route type.
(P.96)
D Select to set route prefer-
ences. (P.96)
E Select to set detours.
(P.96)
F Select to start from adjacent
road. (P.97)
 To hide the route options
screen, touch any part of the
map screen.
3 Check that the route overview is displayed. (P.88)
3
Navigation system
As the vehicle approaches
an intersection, or point,
where maneuvering the
vehicle is necessary, the
navigation system’s voice
guidance will provide various messages.
95
96
3-3. Route guidance
Reordering destinations
When more than 1 destination
has been set, the arrival order of
the destinations can be
changed.
1 Select
on the map
screen. (P.68)
2 Select “Reorder”.
3 Select the desired destination and select “Move Up” or
“Move Down” to change the
arrival order. Then select
“OK”.
Selecting route type
1 Select
on the map
screen. (P.68)
2 Select “Route Type”.
3 Select the desired route type.
 The entire route from the
starting point to the destination is displayed. (P.88)
3 Select the desired route preferences and select “OK”.
● Even if the “Freeways” route pref-
erence is turned off, the route may
not be able to avoid freeways in
some cases.
● If the calculated route includes a
trip by ferry, the route guidance
shows a sea route. After traveling
by ferry, the current position may
be incorrect. Upon reception of
GPS signals, it is automatically
corrected.
Detour setting
During the route guidance, the
route can be changed to detour
around a section of the route
where a delay is caused by road
repairs, an accident, etc.
1 Select
on the map
screen. (P.68)
2 Select “Detour”.
3 Select the desired detour distance.
 During driving, the route guidance starts after selecting the
desired route type.
Setting route preferences
The conditions to determine the
route can be selected from various choices such as freeways,
toll roads, ferries, etc.
1 Select
on the map
screen. (P.68)
2 Select “Preference”.
A Select to detour within 1 mile
of the current position.
B Select to detour within 3
miles of the current position.
C Select to detour within 5
miles of the current position.
3-3. Route guidance
D Select to detour on the entire
route.
E Select to make the navigation
system search for the route
based on traffic congestion
information received from
traffic information.* (P.77)
: This function is not made available in some countries or areas.
● This picture shows an example of
how the navigation system would
guide around a delay caused by a
traffic jam.
A This position indicates the location of a traffic jam caused by
road repairs, an accident, etc.
B This route indicates the detour
suggested by the navigation system.
● When the vehicle is on a freeway,
the detour distance selections are
5, 15 and 25 miles (or 5, 15 and
25 km if units are in km).
● The navigation system may not be
able to calculate a detour route
depending on the selected distance and surrounding road conditions.
Adjacent road
When a freeway and a surface
road run in parallel, the naviga-
tion system may show the guidance route going on the freeway
while driving on the surface
road, or vice versa.
If this happens, you can
instantly choose the adjacent
road for the route guidance.
1 Select
on the map
screen. (P.68)
2 Select “Adjacent Road”.
● When there is no adjacent road,
this screen button will not be displayed.
3
Navigation system
*
97
98
3-4. Setup
Navigation settings
3-4.Setup
Home, favorites list entries,
areas to avoid can be set as
memory points. The registered points can be used as
the destinations. (P.80)
Registered areas to avoid,
will be avoided when the
navigation system searches
for a route.
Displaying navigation settings screen
1 Press the “MENU” button.
Navigation settings
screen
A Select to set home. (P.98)
B Select to set the favorites list.
(P.99)
C Select to set areas to avoid.
(P.101)
D Select to set detailed naviga-
tion settings. (P.103)
● When “Useful Navi. Information
Settings” is displayed on the
screen: P.111
Setting up home
2 Select “Setup”.
3 Select “Navigation”.
4 Select the desired item to be
set.
If home has been registered,
that information can be recalled
by selecting
on the destination screen. (P.80)
1 Display the navigation settings screen. (P.98)
2 Select “Home”.
3-4. Setup
3 Select the desired item to be
set.
99
A Select to edit the home
name. (P.100)
B Select to set display of the
home name on/off.
C Select to edit location infor-
mation. (P.100)
3
D Select to change the icon to
(P.99)
B Select to edit home. (P.99)
C Select to delete home.
(P.99)
Registering home
1 Select “Save Home”.
2 Select the desired item to
search for the location.
(P.80)
3 Select “OK” when the editing
home screen appears.
Editing home
3 Select “OK”.
Deleting home
1 Select “Delete”.
2 Select “Yes” when the confirmation screen appears.
Setting up favorites list
Points on the map can be registered.
1 Display the navigation settings screen. (P.98)
2 Select “Favorites”.
3 Select the desired item.
1 Select “Edit”.
2 Select the desired item to be
edited.
A Select to register favorites list
entries. (P.100)
B Select to edit favorites list
entries. (P.100)
Navigation system
A Select to register home.
be displayed on the map
screen. (P.101)
100
3-4. Setup
C Select to delete favorites list
entries. (P.101)
3 Select the desired item to be
edited.
Registering favorites list
entries
1 Select “New”.
2 Select the desired item to
search for the location.
(P.80)
3 Select “OK” when the editing
favorites list screen appears.
(P.100)
● Up to 100 favorites list entries can
be registered.
Editing favorites list
entries
The icon, name, location and/or
phone number of a registered
favorites list entry can be edited.
1 Select “Edit”.
2 Select the desired favorites
list entry.
 Each time a star icon is
selected, its color will change.
Colored star icons indicate
that the favorite is registered
to the corresponding preset
destination button. Up to 2
entries can be registered as
quick favorite destinations.
(P.86)
A Select to edit the favorites list
entry name. (P.100)
B Select to set display of the
favorites list entry name
on/off.
C Select to edit location infor-
mation. (P.100)
D Select to edit the phone num-
ber. (P.101)
E Select to change the icon to
be displayed on the map
screen. (P.101)
4 Select “OK”.
Changing the name
1 Select “Name”.
2 Enter a name and select
“OK”.
Changing the location
1 Select “Location”.
2 Scroll the map to the desired
point (P.72) and select
“OK”.
3-4. Setup
Changing phone number
1 Select “Phone #”.
2 Enter the phone number and
select “OK”.
Changing the icon
2 Select the desired icon.
Deleting favorites list
entries
1 Select “Delete”.
2 Select the desired item to be
deleted.
“Sort/Delete All”: Select to sort
(date, name, icon) or delete all
favorite list entries.
3 Select “Yes” when the confirmation screen appears.
Setting up areas to avoid
 “Page 1”/“Page 2”: Select to
change pages.
“With Sound”: Select the desired
icons with sound
■ When “With Sound” is
Areas to be avoided because of
traffic jams, construction work or
other reasons can be registered
as “Areas to Avoid”.
1 Display the navigation settings screen. (P.98)
2 Select “Areas to Avoid”.
3 Select the desired item.
selected
A sound for some favorites list
entries can be set. When the
vehicle approaches the location
of the favorites list entry, the
selected sound will be heard.
1 Select “With Sound”.
2 Select the desired sound
icon.
: Select to play the sound.
● When “Bell (with Direction)” is
selected, select an arrow to adjust
the direction and select “OK”.
● The bell sounds only when the
vehicle approaches this point in
the direction that has been set.
A Select to register areas to
avoid. (P.102)
B Select to edit areas to avoid.
(P.102)
C Select to delete areas to
avoid. (P.103)
3
Navigation system
1 Select “Icon”.
101
102
3-4. Setup
Registering areas to avoid
1 Select “New”.
3 Select the desired item to be
edited.
2 Select the desired item to
search for the location.
(P.80)
3 Select either
or
to
change the size of the area to
be avoided and select “OK”.
A Select to edit the name of the
area to avoid. (P.102)
B Select to set display of the
area to avoid name on/off.
C Select to edit area location.
(P.102)
4 Select “OK” when the area to
avoid screen appears.
● If a destination is entered in the
area to avoid or the route calculation cannot be made without running through the area to avoid, a
route passing through the area to
be avoided may be shown.
● Up to 10 locations can be registered as points/areas to avoid.
Editing areas to avoid
The name, location and/or area
size of a registered area can be
edited.
1 Select “Edit”.
2 Select the desired area.
D Select to edit area size.
(P.102)
E Select to set the area to
avoid function on/off.
4 Select “OK”.
Changing the name
1 Select “Name”.
2 Enter a name and select
“OK”.
Changing the location
1 Select “Location”.
2 Scroll the map to the desired
point (P.72) and select
“OK”.
Changing the area size
1 Select “Size”.
3-4. Setup
2 Select either
or
to
change the size of the area to
be avoided and select “OK”.
Deleting areas to avoid
1 Select “Delete”.
3 Select “Yes” when the confirmation screen appears.
Detailed navigation
settings
Settings are available for
pop-up information, favorite POI categories, low fuel
warning, etc.
Displaying the detailed
navigation settings
screen
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Navigation”.
4 Select “Detailed Navi. Settings”.
5 Select the desired items to
be set.
3
Navigation system
2 Select the desired area to be
deleted.
103
104
3-4. Setup
Detailed navigation settings screen
 “Low Fuel Warning Pop-up”
Select to set display of low fuel
warning on/off. (P.105)
 “Unverified Roads Guidance
Warning”
Select to set unverified roads guidance warning on/off.
 “Guidance on Unverified
Roads”
Select to set IPD road (roads that
are not completely digitized in our
database) guidance on/off.
 “Guidance with Street Names”
Select to set the voice guidance for
the next street name on/off.
Select to set automatic destination
list information on/off. When set to
on, the estimated time of arrival to
the registered home and preset
destinations from the current position will be displayed.
 “Intersection Zoom Map”
Select to set display of a guidance
screen on/off.
 “Automatic Zoom”
Select to set automatic zoom function on/off. When it is enabled, as
the vehicle approaches a guidance
point, the map will change to a
detailed map automatically.
 “State Border Guidance”
Select to set cross-border guidance
on/off.
 “Map Color Customization”
 “Favorite POI Categories”
Select to set the map display color.
Select to set favorite POI categories that are used for POI selection
to display on the map screen.
(P.105)
 “Map Animation”
 “Calibration”
Select to enable/disable routes
sourced from the Toyota Entune
center. (P.90)
Select to adjust the current position
mark manually or to adjust miscalculation of the distance caused by
tire replacement. (P.105)
 “Adaptive Route”
Select to enable/disable adaptive
routes. When enabled, the navigation system will provide frequently
used routes.
 “Reset Adaptive Route”
Select to erase adaptive route data.
 “Automatic Destination List
Info”
Select to set map animation on/off.
 “Dynamic Route”*1
 “Predictive Efficient Drive”*1, 2
Select to set predictive efficient
drive on/off. (P.106)
 “Restore the default settings”
Select to reset all setup items.
*1
: This function is not made available in some countries or areas.
*2: Vehicles
with hybrid system
3-4. Setup
Low fuel warning
105
3 Select the desired category
to be changed.
When the fuel level is low, a
warning message will pop up on
the screen.
1 Display the detailed navigation settings screen.
(P.103)
3 Select “On” or “Off”.
Searching gas station in low
fuel warning
A nearby gas station can be
selected as a destination when
the fuel level is low.
1 Select “Yes” when the low
fuel warning appears.
2 Select the desired nearby
gas station.
3 Select “Enter” to set as a
destination.
“Info”: Select to display gas station
information. (P.76)
Favorite POI categories
(Select POI icons)
Up to 6 POI icons, which are
used for selecting POIs on the
map screen, can be selected as
favorites.
1 Display the detailed navigation settings screen.
(P.103)
2 Select “Favorite POI Categories”.
“Default”: Select to set the default
categories.
4 Select the desired POI category.
“List All Categories”: Select to display all POI categories.
5 Select the desired POI icon.
6 Select “OK”.
Current position/Tire
change calibration
The current position mark can
be adjusted manually. Miscalculation of the distance caused by
tire replacement can also be
adjusted.
1 Display the detailed navigation settings screen.
(P.103)
2 Select “Calibration”.
3 Select the desired item.
 For additional information on
the accuracy of a current
position: P.112
Navigation system
2 Select “Low Fuel Warning
Pop-up”.
3
106
3-4. Setup
Position/Direction calibration
When driving, the current position mark will be automatically
corrected by GPS signals. If
GPS reception is poor due to
location, the current position
mark can be adjusted manually.
1 Select “Position/Direction”.
2 Scroll the map to the desired
point (P.71) and select
“OK”.
3 Select an arrow to adjust the
direction of the current position mark and select “OK”.
Tire change calibration
The tire change calibration function will be used when replacing
the tires. This function will adjust
miscalculation caused by the
circumference difference
between the old and new tires.
1 Select “Tire Change”.
 The message appears and
the quick distance calibration
starts automatically.
outside the contiguous United
States (Example: Alaska and
Hawaii).
Predictive deceleration support
The system automatically stores
and registers support points
where the driver always decelerates or stops based on pedal
operation and the vehicle speed
of the driver.
The registered points are shown
on the map as icons
for use
as predictive deceleration support points.
After releasing the accelerator
pedal, the engine brake (regeneration brake) amount
increases. (regeneration boost
control)
As a result, the battery charge
amount can be increased when
decelerating or stopping the
vehicle contributing to improved
actual fuel economy.
 The predictive efficient drive
function can be turned on/off.
(P.103)
● If this procedure is not performed
when the tires are replaced, the
current position mark may be
incorrectly displayed.
Predictive efficient drive*1,
2
*1
: Vehicles with hybrid system
*2: This
function does not operate
Predictive SOC control
The system reads the road and
traffic conditions ahead to optimally control the charging and
discharging of the hybrid battery
according to the actual driving
situation. As a result, actual fuel
3-4. Setup
Traffic settings*
economy can be improved.
● The system operates when start-
ing route guidance and the position of the vehicle is along the
guided route. (The system does
not operate in parking lots, etc.)
● When multiple destinations are
set, the system will continue to
operate to the last destination.
*:
This function is not made available in some countries or areas.
Traffic information such as
traffic congestion or traffic
incident warnings can be
made available.
Displaying the traffic settings screen
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Traffic”.
4 Select the desired items to
be set.
Screen for traffic settings
3
Navigation system
The capacity of the hybrid battery is limited. When it is fully
charged, regeneration cannot
occur, and when the battery is
depleted, it may be forcibly
charged by the engine. The system predicts these situations to
adjust the battery charge level in
advance, effectively utilizing the
battery.
107
108
3-4. Setup
mation can be registered as “My
Traffic Routes”. A route is set by
defining a start point and end
point, and can be adjusted by
setting up to 2 preferred roads.
1 Display the traffic settings
screen. (P.107)
A Select to set specific routes
(such as frequently used
routes) on which you wish to
receive traffic information.
(P.108)
2 Select “My Traffic Routes”.
3 Select the desired item.
B Select to set the avoid traffic
function auto/manual.
(P.110)
C Select to set the usage of
traffic information for the estimated arrival time on/off.
D Select to set the display of an
arrow of free flowing traffic
on/off.
E Select to set to on/off
whether to consider the predictive traffic information
(P.78) with estimated
arrival time and detoured
route search.
A Select to register personal
traffic routes. (P.108)
B Select to edit personal traffic
routes. (P.109)
C Select to delete personal traf-
fic routes. (P.109)
Registering personal traffic
routes
1 Select “New”.
F Select to set traffic incident
2 Select “Name”.
G Select to reset all setup
3 Enter the name and select
“OK”.
voice warning on/off.
items.
4 Select “Start”.
My traffic routes
5 Select the desired item to
search for the location.
(P.80)
Specific routes (such as frequently used routes) on which
you wish to receive traffic infor-
6 Select “End”.
3-4. Setup
7 Select the desired item to
search for the location.
(P.80)
109
3 Select the desired item to be
edited.
8 Select “OK”.
9 Confirm the route overview
displayed.
3
personal traffic route.
(P.108)
B Select to edit start location.
A Select the desired route from
3 possible routes. (P.88)
B Select to modify the route.
The routes can be adjusted
by setting preferred roads.
(P.109)
10Select “OK”.
● Up to 5 routes can be registered.
Editing personal traffic
routes
1 Select “Edit”.
2 Select the desired traffic
route.
(P.108)
C Select to edit end location.
(P.108)
D Select to see and modify the
entire route. (P.109)
4 Select “OK”.
5 Follow the steps in “Registering personal traffic routes”
from step 9. (P.108)
Deleting personal traffic
routes
1 Select “Delete”.
2 Select the desired traffic
route to be deleted and
select “Delete”.
3 Select “Yes” when the confirmation screen appears.
Setting preferred roads
“My Traffic Routes” can be
adjusted by setting up to 2 pre-
Navigation system
A Select to edit the name of the
110
3-4. Setup
ferred roads.
1 Select “Set Preferred
Roads”.
 If a preferred road is already
set, a second preferred road
can be added anywhere
between the start point, the
end point and the existing
preferred road.
■ Modifying preferred roads
1 Select “Modify”.
2 Select the desired item.
2 Select the desired preferred
road to be modified if 2 preferred roads have been set.
3 Scroll the map to the desired
point (P.71) and select
“OK”.
4 Select “OK” to use this road.
“Next”: Select to change road.
■ Deleting preferred roads
1 Select “Delete”.
A Select to add preferred
roads. (P.110)
B Select to modify preferred
roads. (P.110)
C Select to delete preferred
roads. (P.110)
■ Adding preferred roads
1 Select “Add”.
2 Scroll the map to the desired
point (P.71) and select
“OK”.
3 Select “OK” to use this road.
“Next”: Select to change road.
Available only when 1 preferred road is set
4 Select “Add Here” for the
desired location.

2 Select the desired preferred
road to be deleted if 2 preferred roads have been set.
“Delete All”: Select to delete all preferred roads on the list.
3 Select “Yes” when the confirmation screen appears.
Avoid traffic
1 Display the traffic settings
screen. (P.107)
2 Select “Avoid Traffic”.
3-4. Setup
3 Select the desired item.
111
1 Select the desired item.
3
change routes when congestion information of the guidance route has been
received.
B Select to select manually
whether or not to change
routes when congestion
information of the guidance
route has been received. In
this mode, a screen will
appear to ask if you wish to
reroute.
C Select to not reroute when
congestion information for
the guidance route has been
received.
Changing the route manually
When the navigation system
calculates a new route, a confirmation screen will be displayed.
A Select to start route guidance
using the new route.
B Select to confirm the new
route and current route on
the map.
C Select to continue the current
route guidance.
Navigation system
A Select to automatically
112
3-4. Setup
Use of information
accumulated by navigation system* (Vehicles equipped with
DCM)
*
: This function may not be available immediately after purchase
of the vehicle.
When enabled, information
collected by the navigation
system will be analyzed to
give advice for safe driving.
Displaying the useful navigation information settings screen
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Navigation”.
4 Select “Useful Navi. Information Settings”.
5 Select the desired items to
be set.
3-5. Tips for the navigation system
GPS (Global Positioning System)
3-5.Tips for the navigation system
Limitations of the navigation system
The Global Positioning System
(GPS) developed and operated
by the U.S. Department of
Defense provides an accurate
current position, normally using
4 or more satellites, and in some
case 3 satellites. The GPS system has a certain level of inaccuracy. While the navigation
system compensates for this
most of the time, occasional
positioning errors of up to 300 ft.
(100 m) can and should be
expected. Generally, position
errors will be corrected within a
few seconds.
When the vehicle is not receiving signals from satellites, the
unreceived GPS mark appears
on the map screen. When the
vehicle is receiving the signals,
the unreceived GPS mark does
not appear on the map screen.
The GPS signal may be physically obstructed, leading to inaccurate vehicle position on the
map screen. Tunnels, tall buildings, trucks, or even the placement of objects on the
instrument panel may obstruct
the GPS signals.
The GPS satellites may not
send signals due to repairs or
improvements being made to
them.
Even when the navigation system is receiving clear GPS signals, the vehicle position may
not be shown accurately or inappropriate route guidance may
occur in some cases.
NOTICE
● The installation of window tint-
ing may obstruct the GPS signals. Most window tinting
contains some metallic content
that will interfere with GPS signal reception of the antenna in
the instrument panel. We advise
against the use of window tinting on vehicles equipped with
navigation systems.
 Accurate current position may
not be shown in the following
cases:
• When driving on a small angled
Y-shaped road.
• When driving on a winding road.
• When driving on a slippery road
such as in sand, gravel, snow,
etc.
3
Navigation system
This navigation system calculates the current position
using satellite signals, various vehicle signals, map
data, etc. However, an accurate position may not be
shown depending on satellite conditions, road configuration, vehicle condition or
other circumstances.
113
114
3-5. Tips for the navigation system
• When driving on a long straight
road.
• When freeway and surface
streets run in parallel.
• After moving by ferry or vehicle
carrier.
• When a long route is searched
during high speed driving.
• When driving without setting the
current position calibration correctly.
• After repeating a change of direction by going forward and backward, or turning on a turntable in
a parking lot.
• When leaving a covered parking
lot or parking garage.
• When a roof carrier is installed.
• When driving with tire chains
installed.
• When the tires are worn.
• After replacing a tire or tires.
• When using tires that are smaller
or larger than the factory specifications.
• When the tire pressure in any of
the 4 tires is not correct.
 If the vehicle cannot receive
GPS signals, the current position can be adjusted manually. For information on setting
the current position calibration: P.105
• If you set more than 1 destination
but skip any of them, auto reroute
will display a route returning to
the destination on the previous
route.
• When turning at an intersection
for which there is no route guidance.
• When passing through an intersection for which there is no route
guidance.
• During auto reroute, the route
guidance may not be available for
the next turn to the right or left.
• During high speed driving, it may
take a long time for auto reroute
to operate. In auto reroute, a
detour route may be shown.
• After auto reroute, the route may
not be changed.
• If an unnecessary U-turn is
shown or announced.
• If a location has multiple names
and the system announces 1 or
more of them.
• When a route cannot be
searched.
• If the route to your destination
includes gravel, unpaved roads or
alleys, the route guidance may
not be shown.
• Your destination point might be
shown on the opposite side of the
street.
 Inappropriate route guidance
may occur in the following
cases:
• When a portion of the route has
regulations prohibiting the entry
of the vehicle that vary by time,
season or other reasons.
• When turning at an intersection
off the designated route guidance.
• The road and map data stored in
the navigation system may not be
complete or may not be the latest
3-5. Tips for the navigation system
version.
 After replacing a tire: P.105
● This navigation system uses tire
Map database version
and covered area
Coverage areas and legal
information can be displayed and map data can be
updated.
Map information
1 Select
on the map
screen. (P.68)
2 Select “Map Data”.
3 Check that the map data
screen is displayed.
A Map version
B Select to display map cover-
age areas.
C Select to display legal infor-
mation.
D Expiration date of temporary
updates of the map and a
route from the Toyota Entune
center.
When “***” is displayed for
the expiration date, the validity period has not yet been
set for the service. The validity period will be set automat-
3
Navigation system
turning data and is designed to
work with factory-specified tires
for the vehicle. Installing tires that
are larger or smaller than the originally equipped diameter may
cause inaccurate display of the
current position. The tire pressure
also affects the diameter of the
tires, so make sure that the tire
pressure of all 4 tires is correct.
115
116
3-5. Tips for the navigation system
ically. Map updates are
available even before the
period is set.
E Select to update map.
● For map data updates, contact
your Toyota dealer.
Temporary updates of the
map* (Vehicles equipped
with DCM)
*
: This function is not made available in some countries or areas.
If the map data has been provided from the Toyota Entune
center for any of the following
areas and the map data in the
navigation system is older than
what has been provided, the displayed map will be updated temporarily:
• Areas around the area displayed on the map screen
(example: areas around current position)
• Areas around destinations
• Areas along the set route
● The updated data will temporarily
be saved in the navigation system.
● If temporary update data exceeds
the available memory in the temporary map cache, the oldest data
will be deleted.
● The temporary map data will disappear when the expiration date
has passed.
117
Audio/visual system
4
4-1. Basic operation
Quick reference........... 118
Some basics ............... 119
4-2. Radio operation
AM/FM/SiriusXM (SXM)
radio .......................... 123
4-3. Media operation
USB memory............... 132
iPod/iPhone................. 134
Bluetooth® audio ......... 137
AUX............................. 140
4-4. Audio/visual remote controls
Steering switches........ 142
4-5. Setup
Audio settings ............. 144
4-6. Tips for operating the
audio/visual system
Operating information . 146
Audio/visual system
Internet radio ............... 131
4
118
4-1. Basic operation
Quick reference
4-1.Basic operation
Functional overview
The audio control screen can be reached by the following methods:
From the “AUDIO” button
1 Press the “AUDIO” button.

From the “MENU” button
1 Press the “MENU” button, then select “Audio”.

 Using the radio (P.123)
 Playing a USB memory (P.132)
 Playing an iPod/iPhone (P.134)
 Playing a Bluetooth® device (P.137)
 Using the AUX port (P.140)
 Using the steering wheel audio switches (P.142)
 Audio system settings (P.144)
4-1. Basic operation
Some basics
This section describes
some of the basic features
of the audio/visual system.
Some information may not
pertain to your system.
NOTICE
● To prevent the 12-volt battery
from being discharged, do not
leave the audio/visual system
on longer than necessary when
the engine is not running <the
hybrid system is not operating>.
Turning the system on
and off
“POWER VOLUME” knob:
Press to turn the audio/visual
system on and off. The system
turns on in the last mode used.
Turn this knob to adjust the volume.
Selecting an audio source
1 Press the “AUDIO” button.
4
2 Select “Source” or press
“AUDIO” button again.
3 Select the desired source.
● Dimmed screen buttons cannot be
operated.
● When there are two pages, select
or
to change the page.
● When an Apple Carplay connec-
tion is established, some system
functions, such as the following,
will be replaced by similar Apple
CarPlay function or will become
unavailable*:
• iPod (Audio Playback)
• USB audio/USB video
• Bluetooth® audio
• Toyota Entune App Suite Connect
*: This function is not made available in some countries or areas.
Reordering the audio
source
1 Display the audio source
selection screen. (P.119)
2 Select “Reorder”.
Audio/visual system
Your audio/visual system
works when the engine
switch <power switch> is in
ACC or ON.
119
120
4-1. Basic operation
3 Select the desired audio
source then
der.
or
to reor-
3 Select the desired item to be
set.

Type A
4 Select “OK”.
USB/AUX port
1 Open the lid and connect a
device.
A Select to set the tre-
ble/mid/bass. (P.120)
B Select to set the fader/bal-
ance. (P.121)
C Select to set the automatic
sound leveliser. (P.121)
 Turn on the power of the
device if it is not turned on.

Type B
● The AUX port only supports audio
input.
● If a USB hub is plugged-in, two
devices can be connected at a
time.
● Even if a USB hub is used to connect more than two USB devices,
only the first two connected
devices will be recognized.
● If a USB hub that has more than
two ports is connected to the USB
port, devices connected to the
USB hub may not charge or be
inoperable, as the supply of current may be insufficient.
Sound settings
1 Display the audio control
screen. (P.119)
2 Select “Sound”.
A Select to set the tre-
ble/mid/bass. (P.120)
B Select to set the fader/bal-
ance. (P.121)
C Select to set the automatic
sound leveliser. (P.121)
■ Treble/Mid/Bass
How good an audio program
sounds is largely determined by
the mix of the treble, mid and
bass levels. In fact, different
4-1. Basic operation
kinds of music and vocal programs usually sound better with
different mixes of treble, mid
and bass.
1 Select “Treble/Mid/Bass”.
121
2 Select the desired screen
button.
2 Select the desired screen
button.
4
A Select to adjust the sound
B Select to adjust the sound
balance between the left and
right speakers.
A Select “+” or “-” to adjust
high-pitched tones.
■ Automatic sound levelizer
(ASL)
B Select “+” or “-” to adjust mid-
pitched tones.
C Select “+” or “-” to adjust low-
pitched tones.
■ Fader/Balance
A good balance of the left and
right stereo channels and of the
front and rear sound levels is
also important.
Keep in mind that when listening
to a stereo recording or broadcast, changing the right/left balance will increase the volume of
1 group of sounds while
decreasing the volume of
another.
1 Select “Fader/Balance”.
The system adjusts to the optimum volume and tone quality
according to vehicle speed to
compensate for increased road
noise, wind noise, or other
noises while driving.
Type A
1 Select “Automatic Sound
Levelizer”.

2 Select “High”, “Mid”, “Low” or
“Off”.
Type B
1 Select “Automatic Sound
Levelizer”.

2 Select to set the automatic
sound leveliser on/off.
Audio/visual system
balance between the front
and rear speakers.
122
4-1. Basic operation
Audio screen adjustment
■ Screen format settings
The screen format can be
selected for USB video.
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Audio”.
4 Select “Common”.
4 Select “Common”.
5 Select “Display”.
6 Select the desired item to be
adjusted.
 “Contrast”
“+”: Select to strengthen the contrast of the screen.
“-”: Select to weaken the contrast of
the screen.
5 Select “Screen Format”.
 “Brightness”
6 Select the desired item to be
adjusted.
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
● Depending on the audio source,
some functions may not be available.
Voice command system
1 Press this switch to operate
the voice command system.
A Select to display a 4:3
screen, with either side in
black.
B Select to enlarge the image
horizontally and vertically to
full screen.
C Select to enlarge the image
by the same ratio horizontally
and vertically.
■ Contrast and brightness
adjustment
The contrast and brightness of
the screen can be adjusted.
1 Press the “MENU” button.
2 Select “Setup”.
3 Select “Audio”.
 The voice command system
and its list of commands can
be operated. (P.156)
4-2. Radio operation
AM/FM/SiriusXM (SXM)
radio
4-2.Radio operation
Overview
The radio operation screen can
be reached by the following
methods:
P.119
Control screen
123
favorites (P.129, P.145)
I Displays the artist info and
song title or album
Select to change the displayed information.
Displays messages when
available
J Displays cover art, station
logo, etc.
cast channels available.
(P.127)
Control panel
A Select to display the audio
source selection screen.
B Select to display the preset
stations screen. (P.124)
C Select to display the cache
radio operation screen.
(P.124)
receivable stations. (P.125)
E Select to display the radio
options screen. (P.125)
F Select to display the sound
setting screen. (P.120)
G Select to tune to preset sta-
tions/channels. (P.124)
H Displays items on the chan-
nels registered to smart
A Press to seek for stations in
the relevant program
type/channel category.
Press and hold for continuous seek.
B Turn to step up/down fre-
quencies/channels.
Turn to move up/down the
station list. Also, the knob
can be used to enter selections on the list screens by
Audio/visual system
the song/track currently
being played
L Select to display HD) multi-
D Select to display a list of
4
K Displays information about
124
4-2. Radio operation
pressing it.
● The radio automatically changes
to stereo reception when a stereo
broadcast is received.
● The radio automatically blends to
an HD Radio signal in AM or FM
where available.
Presetting a station
Radio mode has a mix preset
function, which can store up to
36 stations (6 stations per page
x 6 pages) from any of the AM,
FM or SXM bands.
1 Tune in the desired station.
2 Select and hold “(Add New)”.
can be cached and played back
in a time-shifted manner.
*
: Entune Premium Audio only
■ Automatic playback of the
cache
If the radio broadcast is interrupted by another audio output,
such as an incoming phone call,
the system will automatically
cache the interrupted portion
and perform time-shift playback
when the interruption ends. This
function is available when “Auto
Pause” is set to on. (P.125)
■ Playing back the cache
manually
The broadcast cached in the
program cache can be played
back manually.
1 Select “SXM Replay”*1 or
“Radio Replay”*2.
*1
 When “(Add New)” is
selected, a confirmation message appears. Select “Yes”
and select “OK”.
: Entune Audio Plus only
*2: Entune
Premium Audio only
2 Select the desired cache
radio operation button.
 To change the preset station
to a different one, select and
hold the preset station.
● The number of preset radio sta-
tions displayed on the screen can
be changed. (P.144)
Caching a radio program
AM/FM* and SXM radio program
A Returns to the live radio
broadcast
B Displays the replay offset
from the current time
4-2. Radio operation
C Skips backward 2 minutes
(AM/FM)
Select to select current/previous track (SXM)
D Fast rewinds continuously
E Pauses the playback (To
restart, select
)
F Fast forwards continuously
G Skips forward 2 minutes
● The system can store up to 20
minutes of AM/FM and less than
60 minutes of SXM. Cached data
will be erased when the radio
mode or station is changed or
when the audio system is turned
off.
● AM/FM: If noise or silence occurs
during the caching process, cache
writing will continue, with the noise
or silence recorded as is. In this
case, the cached broadcast will
contain the noise or silence when
played back.
Selecting a station from
the list
1 Select “Station List”.
2 Select “AM”, “FM” or “SXM”.
 Select the desired program
genre when the genre selection screen is displayed.
3 Select the desired station.
■ Refreshing the station list
(AM/FM)
1 Select “Station List”.
“Cancel Refresh”: Select to cancel the refresh.
“Source”: Select to change to
another audio source while
refreshing.
● The audio/visual system sound is
muted during refresh operation.
● In some situations, it may take
some time to update the station
list.
Radio options
1 Select “Options”.
2 Select the desired item to be
set.
A Select to turn automatic play-
back of the cache on/off.
B When “SXM Tune Start” is
turned on, the current song is
played from the beginning
when you select the channel.
C Select to turn digital AM
Radio mode on/off.
D Select to turn digital FM
Radio mode on/off.
E Analog FM only: Select to
display RBDS text messages.
4
Audio/visual system
(AM/FM)
Select to change the track
(SXM)
125
126
4-2. Radio operation
F Select to scan for receivable
stations. (Type scan in case
SXM is current program
type/channel category.)
Radio broadcast data system
casts have better sound quality
than analog broadcasts as digital broadcasts provide free,
crystal clear audio with no static
or distortion. For more information, and a guide to available
radio stations and programming,
refer to www.hdradio.com.
This audio/visual system is
equipped with Radio Broadcast
Data Systems (RBDS). RBDS
mode allows text messages to
be received from radio stations
that utilize RBDS transmitters.
HD Radio features included in
Toyota radios:
When RBDS is on, the radio can
do the following functions.
• Only selecting stations of a
particular program type
• Displaying messages from
radio stations
• Searching for a stronger signal station
 HD2/HD3 ChannelsFM stations can provide additional digital only audio programming with expanded
content and format choices on
HD2/HD3 channels.
RBDS features are available
only when listening to an FM
station that broadcasts RBDS
information and the “FM Info”
function is on. (P.125)
Using HD Radio™ technology
HD Radio™ Technology is the
digital evolution of analog
AM/FM radio. Your radio product
has a special receiver which
allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it
already receives. Digital broad-
 Digital SoundHD Radio broadcasts deliver
crystal-clear, digital audio
quality to listeners.
 PSDProgram Service Data (PSD)
gives you on-screen information such as artist name and
song title.
 Artist ExperienceImages related to the broadcast are displayed on the
radio screen, such as album
cover art and station logos.
■ Certification
4-2. Radio operation
HD Radio Technology manufactured
under license from iBiquity Digital
Corporation. U.S. and Foreign Patents. For patents see
http://dts.com/patents. HD Radio,
Artist Experience, and the HD, HD
Radio, and “ARC” logos are registered trademarks or trademarks of
iBiquity Digital Corporation in the
United States and/or other countries.
Available HD Radio™
technology
On the FM radio frequency most
digital stations have “multiple” or
supplemental programs on one
FM station.
1 Select the “HD)” logo.
2 Select the desired channel.
 Turning the “TUNE SCROLL”
knob can also select the
desired multicast channel.
Troubleshooting guide
■ Experience
 Mismatch of time alignment- a
user may hear a short period
of programming replayed or
an echo, stutter or skip.
Cause: The radio stations analog
and digital volume is not properly
aligned or the station is in ballgame
mode.
Action: None, radio broadcast
issue. A user can contact the radio
station.
 Sound fades, blending in and
out.
Cause: Radio is shifting between
analog and digital audio.
Action: Reception issue, may clearup as the vehicle continues to be
driven. Turning the indicator of the
“HD Radio AM” and “HD Radio FM”
button off can force radio in an analog audio.
 Audio mute condition when an
HD2/HD3 multicast channel
had been playing.
Cause: The radio does not have
access to digital signals at the
moment.
Action: This is normal behavior,
wait until the digital signal returns. If
out of the coverage area, seek a
new station.
 Audio mute delay when
selecting an HD2/HD3 multicast channel preset.
Cause: The digital multicast content
is not available until HD Radio™
broadcast can be decoded and
make the audio available. This
takes up to 7 seconds.
Action: This is normal behavior,
wait for the audio to become available.
 Text information does not
match the present song
audio.
Cause: Data service issue by the
radio broadcaster.
Action: Broadcaster should be notified. Complete the form:
hdradio.com/stations/feedback.
 No text information shown for
the present selected frequency.
4
Audio/visual system
■ Multicast
127
128
4-2. Radio operation
Cause: Data service issue by the
radio broadcaster.
Action: Broadcaster should be notified. Complete the form:
hdradio.com/stations/feedback.
(Canada). All fees and programming subject to change. Traffic
information not available in all
markets.
NOTICE
How to Subscribe to SiriusXM Satellite Radio
All SiriusXM services, including
satellite radio and data services,
plus streaming services, require
a subscription, sold separately
or as a package by Sirius XM
Radio Inc. (U.S.A.) or Sirius XM
Canada Inc. (Canada), after any
trial subscription which may be
included with your vehicle purchase or lease. To subscribe
after your trial subscription, call
1-877-447-0011 (U.S.A.) or 1877-438-9677 (Canada).
■ Important information
about your subscription
Your SiriusXM services will
automatically stop at the end of
your trial unless you decide to
subscribe. If you decide to continue service, the paid subscription plan you choose will
automatically renew and you will
be charged the rate in effect at
that time and according to your
chosen payment method. Fees
and taxes apply. You may cancel at any time by calling 1-866635-2349. See SiriusXM Customer Agreement for complete
terms at www.siriusxm.com
(U.S.A.) or www.siriusxm.ca
● It is prohibited to copy, decom-
pile, disassemble, reverse engineer, hack, manipulate, or
otherwise make available any
technology or software incorporated in receivers compatible
with the SiriusXM Satellite
Radio System or that support
the SiriusXM website, the
streaming service or any of its
content. Furthermore, the
AMBE® voice compression software included in this product is
protected by intellectual property rights including patent
rights, copyrights, and trade
secrets of Digital Voice Systems, Inc.
● Note: this applies to SiriusXM
Satellite Radio receivers only
and not SiriusXM Ready
devices.
● About SiriusXM Services
• Most in-car trials today include
SiriusXM’s best package  All
Access. It includes every channel
available on your radio, plus
streaming.
● SiriusXM All Access subscription
• Listen everywhere with All
Access. You get every channel
available in your ride, plus you can
listen on the app and online  so
you can enjoy the best SiriusXM
has to offer, anywhere life takes
you. It’s the only package that
gives you all of our premium programming, including Howard
Stern, every NFL, MLB® and NBA
game, every NASCAR® race,
NHL® games, 24/7 talk channels
dedicated to the biggest leagues,
4-2. Radio operation
Displaying the radio ID
Each SiriusXM tuner is identified
with a unique radio ID. The radio
ID is required when activating
an SiriusXM Satellite service or
when reporting a problem.
 If “Ch 000” is selected using
the “TUNE SCROLL” knob,
the ID code, which is 8 alphanumeric characters, will be
displayed. If another channel
is selected, the ID code will no
longer be displayed. The
channel (000) alternates
between displaying the radio
ID and the specific radio
code.
Smart favorites
Up to 20 channels can be registered as presets in the cache.
For channel registration, refer to
(P.144).
1 Select channels registered to
smart favorites.
2 Select “SXM Replay”*1 or
“Radio Replay”*2.
*1
: Entune Audio Plus only
*2
: Entune Premium Audio only
● Caches up to 30 minutes for each
Smart Favorite preset.
● The radio plays the track from
start when that track has not previously been heard by the user and
the station is registered as a smart
favorite.
● When “SXM Tune Start” is turned
on (P.125), the current song is
played from the beginning when
you select the channel.
● Displays icons on the channels
registered to smart favorites.
(P.123)
Refer to the table below to identify the problem and take
the suggested corrective action
When problems occur with the SiriusXM tuner, a message will
appear on the screen. Referring to the table below to identify the
problem, take the suggested corrective action.
4
Audio/visual system
and more. You get all kinds of
commercial-free music, including
artistdedicated channels and
more, plus sports, news, talk and
entertainment.
● SiriusXM radio operation
• Look for the Sirius, XM, SiriusXM,
Band, SAT, AUX, Radio or Source
button and you’re in. If you can’t
hear us, it’s easy to get started:
U.S.A.:
Locate your Radio ID by turning to
Channel 0. If you don’t see your
number there, go to siriusxm.com/activationhelp to find it.
Visit siriusxm.com/refresh or call
1-855-MYREFRESH (697-3373)
to send a refresh signal to your
radio.
Canada:
Locate your Radio ID by turning to
Channel 0.
Visit siriusxm.ca/refresh to send a
refresh signal to your radio or call
1-888-539-7474 for service.
129
130
4-2. Radio operation
Message
“Check
Antenna”
“No Signal”
Explanation
The SiriusXM antenna is not connected. Check whether the
SiriusXM antenna cable is attached securely. Contact your
Toyota dealer for assistance.
A short circuit occurs in the antenna or the surrounding
antenna cable. Contact your Toyota dealer for assistance.
The SiriusXM signal is too weak at the current location. Wait
until your vehicle reaches a location with a stronger signal.
“Chan
The channel you selected is not broadcasting any programUnavailable” ming. Select another channel.
The channel you selected is no longer available. Wait for
“Ch Unsub- about 2 seconds until the radio returns to the previous chanscribed”
nel or “Ch 001”. If it does not change automatically, select
another channel.
“Subscription
Subscription is updated. Select “OK” to clear this message.
Updated”
● Contact the SiriusXM Listener Care Center at 1-877-447-0011 (U.S.A.) or
1-877-438-9677 (Canada).
4-2. Radio operation
Internet radio*
*:
This function is not made available in some countries or areas.
Listening to internet radio
1 Display the audio source
selection screen. (P.119)
2 Select the desired application
screen button.
 The internet radio application
screen is displayed.
 Perform operations according to the displayed application screen.
 For the instrument panel
operation method: P.119
 If a compatible phone is
already registered, it will be
connected automatically.
● Other applications can be acti-
vated while listening to internet
radio.
● Some parts of applications can be
adjusted using the switches on the
steering wheel.
● For additional information, refer to
http://www.toyota.com/Entune/ or
call
1-800-331-4331 in the United
States,
http://www.toyota.ca/entune or call
1-888-869-6828 in Canada, and
http://www.toyotapr.com/entune or
call
1-877-855-8377 in Puerto Rico.
4
Audio/visual system
One of Toyota Entune App
Suite Connect features is
the ability to listen to internet radio. In order to use
this service, a compatible
phone and the system
needs to be set up. For
details: P.215
131
132
4-3. Media operation
(P.133)
USB memory
4-3.Media operation
G Select to change the
file/track.
Select and hold to fast
rewind.
Overview
The USB memory operation
screen can be reached by the
following methods: P.119
 Connecting a USB memory
(P.120)
When an Apple CarPlay connection is established, this function will be unavailable.*
*:
This function is not made available in some countries or areas.
Control screen

USB audio
H Select to play/pause.
I Select to change the
file/track.
Select and hold to fast forward.
J Select to set random play-
back. (P.133)
K Select to change the
folder/album.
L Displays cover art
M Select to change the artist.
USB video
1 Select “Browse”.

2 Select “Videos”.
3 Select the desired folder and
file.
A Select to display the audio
source selection screen.
B Select to return to the top
screen.
C Select to display a song list
screen.
A Select to display the audio
D Select to display the play
source selection screen.
mode selection screen.
B Select to return to the top
E Select to display the sound
setting screen. (P.120)
F Select to set repeat playback.
screen.
C Select to display a song list
screen.
4-3. Media operation
D Select to display the play
mode selection screen.
E Select to display the sound
setting screen. (P.120)
F Select to change the file.
Select and hold to fast
rewind.
G Select to play/pause.
H Select to change the file.
I Select to display a full screen
image.
J Select to change the folder.
Control panel
sound.
● If tag information exists, the
file/folder names will be changed
to track/album names.
Repeating
The file/track or folder/album
currently being listened to can
be repeated.
1 Select
.
● Each time
is selected, the
mode changes as follows:
 When random playback is off
• file/track repeat  folder/album
repeat  off
 When random playback is on
• file/track repeat  off
Random order
Files/tracks or folders/albums
can be automatically and randomly selected.
1 Select
.
● Each time
A Press to change the
file/track.
Press and hold to fast forward/rewind.
B Turn to change the file/track.
Turn to move up/down the
list. Also, the knob can be
used to enter selections on
the list screens by pressing it.
● While the vehicle is being driven,
this function can only output
is selected, the
mode changes as follows:
• random (1 folder/album random)
 folder/album random (all
folder/album random)  off
WARNING
● Do not operate the player’s con-
trols or connect the USB memory while driving.
4
Audio/visual system
Select and hold to fast forward.
133
134
4-3. Media operation
NOTICE
● Do not leave your portable
player in the car. In particular,
high temperatures inside the
vehicle may damage the portable player.
● Do not push down on or apply
unnecessary pressure to the
portable player while it is connected as this may damage the
portable player or its terminal.
● Do not insert foreign objects into
the port as this may damage the
portable player or its terminal.
iPod/iPhone
Overview
The iPod/iPhone operation
screen can be reached by the
following methods: P.119
 Connecting an iPod/iPhone
(P.120)
When the iPod/iPhone connected to the system includes
video, the system can only output the sound.
Control screen
A Select to display the audio
source selection screen.
B Select to return to the top
screen.*1
C Select to display a song list
screen.*1
D Select to display the play
mode selection screen.*1
E Select to display the sound
setting screen. (P.120)
F Select to display the audio
control screen of Apple CarPlay.*2
4-3. Media operation
G Select to set repeat playback.
(P.136)
H Select to change the track.
Select and hold to fast
rewind.
I Select to play/pause.
J Select to change the track.
Select and hold to fast forward.
back. (P.136)
L Select to change the
album.*1
M Displays cover art
N Select to change the artist.*1
O Select to change the play-
list.*1
*1
: When an Apple CarPlay connection is established, this switch
will not be displayed.
*2: This switch will only be displayed
when an Apple CarPlay connection is established.
Control panel
A Press to change the track.
Press and hold to fast for-
ward/rewind.
B Turn to change the track.
Turn to move up/down the
list. Also, the knob can be
used to enter selections on
the list screens by pressing it.
● Some functions may not be avail-
able depending on the type of
model.
● When an iPod/iPhone is connected using a genuine
iPod/iPhone cable, the
iPod/iPhone starts charging its
battery.
● Depending on the iPod/iPhone,
the video sound may not be able
to be heard.
● Depending on the iPod/iPhone
and the songs in the iPod/iPhone,
a cover art may be displayed. This
function can be changed to “On”
or “Off”. (P.144) It may take time
to display the cover art, and the
iPod/iPhone may not be operated
while the cover art display is in
process.
● When an iPod/iPhone is connected and the audio source is
changed to iPod/iPhone mode,
the iPod/iPhone will resume playing from the same point it was last
used.
● Depending on the iPod/iPhone
that is connected to the system,
certain functions may not be available.
● If an iPhone is connected via
Bluetooth® and USB at the same
time, system operation may
become unstable. For known
phone compatibility information,
refer to
http://www.toyota.com/Entune/.
● Tracks selected by operating a
connected iPod/iPhone may not
be recognized or displayed properly.
4
Audio/visual system
K Select to set random play-
135
136
4-3. Media operation
● The system may not function
properly if a conversion adapter is
used to connect a device.
Repeating
The track currently being listened to can be repeated.
1 Select
.
● Each time
is selected, the
mode changes as follows:
 When
shuffle is off (iPhone 5 or
later)
• track repeat  album repeat  off
 When shuffle is off (iPhone 4s or
earlier)
• track repeat  off
 When shuffle is on
• track repeat  off
Random order
Tracks or albums can be automatically and randomly
selected.
1 Select
.
● Each time
is selected, the
mode changes as follows:
• shuffle (1 album shuffle)  album
shuffle (all album shuffle)  off
WARNING
● Do not operate the player’s con-
trols or connect the iPod/iPhone
while driving.
NOTICE
● Do not leave your portable
player in the car. In particular,
high temperatures inside the
vehicle may damage the portable player.
● Do not push down on or apply
unnecessary pressure to the
portable player while it is connected as this may damage the
portable player or its terminal.
● Do not insert foreign objects into
the port as this may damage the
portable player or its terminal.
4-3. Media operation
Bluetooth® audio
The Bluetooth® audio system enables users to enjoy
listening to music that is
played on a portable player
on the vehicle speakers via
wireless communication.
able in some countries or areas.
Control screen
4
A Select to display the audio
source selection screen.
B Select to return to the top
screen.
C Select to display a song list
screen.
D Select to display the play
Overview
The Bluetooth® audio operation
screen can be reached by the
following methods: P.119
 Connecting a Bluetooth®
audio device (P.139)
Depending on the type of portable player connected, some
functions may not be available
and/or the screen may look differently than shown in this manual.
mode selection screen.
E Select to display the portable
device connection screen.
(P.139)
F Select to display the sound
setting screen. (P.120)
G Select to set repeat playback.
(P.138)
H Select to change the track.
Select and hold to fast
rewind.
I Select to play/pause.
When an Apple CarPlay connection is established, Bluetooth® audio will be suspended
J Select to change the track.
and become unavailable.*
K Select to set random play-
*:
This function is not made avail-
Select and hold to fast forward.
back. (P.138)
Audio/visual system
This audio/visual system
supports Bluetooth®, a wireless data system capable of
playing portable audio
music without cables. If
your device does not support Bluetooth®, the Bluetooth® audio system will not
function.
137
138
4-3. Media operation
L Select to change the album.
M Displays cover art
Control panel
A Press to change the track.
Press and hold to fast forward/rewind.
B Turn to change the track.
Turn to move up/down the
list. Also, the knob can be
used to enter selections on
the list screens by pressing it.
Repeating
The track or album currently
being listened to can be
repeated.
1 Select
.
● Each time
is selected, the
mode changes as follows:
 When random playback is off
• track repeat  album repeat  off
 When random playback is on
• track repeat  off
Random order
Tracks or albums can be automatically and randomly
selected.
1 Select
.
● Each time
is selected, the
mode changes as follows:
• random (1 album random) 
album random (all album random)
 off
● Depending on the Bluetooth®
device that is connected to the
system, the music may start playing when selecting
while it is
paused. Conversely, the music
may pause when selecting
while it is playing.
● In the following conditions, the
system may not function:
• The Bluetooth® device is turned
off.
• The Bluetooth® device is not connected.
• The Bluetooth® device has a low
battery.
● When using the Bluetooth® audio
and Wi-Fi® Hotspot functions at
the same time, the following problems may occur:
• It may take longer than normal to
connect to the Bluetooth® device.
• The sound may cut out.
● It may take time to connect the
phone when Bluetooth® audio is
being played.
● For operating the portable player,
see the instruction manual that
comes with it.
● If the Bluetooth® device is discon-
nected due to poor reception from
the Bluetooth® network when the
engine switch <power switch> is
in ACC or ON, the system automatically reconnects the portable
player.
● If the Bluetooth® device is discon-
nected on purpose, such as it was
4-3. Media operation
turned off, this does not happen.
Reconnect the portable player
manually.
®
NOTICE
● Do not leave your portable
player in the vehicle. In particular, high temperatures inside the
vehicle may damage the portable player.
● Bluetooth device information is
®
WARNING
● Do not operate the player’s con-
trols or connect to the Bluetooth® audio system while
driving.
● Your audio unit is fitted with
Bluetooth® antennas. People
with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or
implantable cardioverter defibrillators should maintain a reasonable distance between
themselves and the Bluetooth®
antennas. The radio waves may
affect the operation of such
devices.
● Before using Bluetooth®
devices, users of any electrical
medical device other than
implantable cardiac pacemakers, cardiac resynchronization
therapy-pacemakers or implantable cardioverter defibrillators
should consult the manufacturer
of the device for information
about its operation under the
influence of radio waves. Radio
waves could have unexpected
effects on the operation of such
medical devices.
Registering/Connecting a
Bluetooth® device
To use the Bluetooth® audio
system, it is necessary to register a Bluetooth® device with the
system.

Registering an additional
device
1 Display the Bluetooth® audio
control screen. (P.137)
2 Select “Connect”.
3 Select “Add Device”.
 When another Bluetooth®
device is connected, a confirmation screen will be displayed. To disconnect the
Bluetooth® device, select
“Yes”.
4 Follow the steps in “Registering a Bluetooth® phone for
the first time” from step 5.
(P.36)

Selecting a registered device
1 Display the Bluetooth® audio
control screen. (P.137)
2 Select “Connect”.
3 Select the desired device to
be connected.
4
Audio/visual system
registered when the Bluetooth
device is connected to the Bluetooth® audio system. When selling
or disposing of the vehicle,
remove the Bluetooth® audio
information from the system.
(P.59)
● In some situations, sound output
via the Bluetooth® audio system
may be out of sync with the connected device or output intermittently.
139
140
4-3. Media operation
4 Check that a confirmation
screen is displayed when the
connection is complete.
 If an error message is displayed, follow the guidance
on the screen to try again.
AUX
Overview
The AUX operation screen can
be reached by the following
methods: P.119
 Connecting a device to the
AUX port (P.120)
Control screen
A Select to display the audio
source selection screen.
(P.119)
B Select to return to the control
screen.
C Select to display the sound
setting screen. (P.120)
WARNING
● Do not connect portable audio
device or operate the controls
while driving.
NOTICE
● Do not leave portable audio
device in the vehicle. The temperature inside the vehicle may
become high, resulting in damage to the player.
4-3. Media operation
141
NOTICE
● Do not push down on or apply
unnecessary pressure to the
portable audio device while it is
connected as this may damage
the portable audio device or its
terminal.
● Do not insert foreign objects into
the port as this may damage the
portable audio device or its terminal.
4
Audio/visual system
142
4-4. Audio/visual remote controls
Steering switches
4-4.Audio/visual remote controls
Steering switch operation
Some parts of the audio/visual
system can be adjusted using
the switches on the steering
wheel.
USB*3, iPod/iPhone, Bluetooth® audio*3, APPS*3
• Press: Change audio modes
• Press and hold (0.8 sec. or
more): Pause (Press and hold
again to resume the play
mode.)

*1
: If equipped
*2
: If cached radio is enabled, pressing and holding the “MODE”
switch pauses the broadcast.
(Press and hold again to play
back the cached radio program.)
*3: When Apple
CarPlay connection
is established, this function will
be unavailable.
A Volume control switch
B “MODE” switch
C
switch
■ Volume control switch
• Press: Volume up/down
• Press and hold (0.8 sec. or
more): Volume up/down continuously
■ “MODE” switch
AM/FM/SXM*1
• Press: Change audio modes
• Press and hold (0.8 sec. or
more): Mute*2 (Press and
hold again to resume the
sound.)

 AUX
• Press: Change audio modes
• Press and hold (0.8 sec. or
more): Mute
■
switch
AM/FM
• Press: Preset channel
up/down
• Press and hold (0.8 sec. or
more): Seek up/down
• Press and hold (1.5 sec. or
more): Seek up/down continuously while the switch is being
pressed

SXM*1
• Press: Preset channel
up/down
• Press and hold (0.8 sec. or
more): Seek for stations in the
relevant program type/channel category
• Press and hold (1.5 sec. or
more): Fast channel up/down

USB*2, iPod/iPhone, Bluetooth® audio*2
• Press: Track/file up/down

4-4. Audio/visual remote controls
143
• Press and hold (0.8 sec. or
more): Fast forward/rewind
*1
: If equipped
*2
: When Apple CarPlay connection
is established, this function will
be unavailable.
● In the APPS mode, some opera-
tion may be done on the screen
depend on the selected APPS.
4
Audio/visual system
144
4-5. Setup
Audio settings
4-5.Setup
Detailed audio settings can
be programmed.
Displaying the audio settings screen
Common settings
1 Display the audio settings
screen. (P.144)
2 Select “Common”.
3 Select the desired items to
be set.
1 Press the “MENU” button.
A Select to set the cover art
display on/off.
B Select to prioritize the display
2 Select “Setup”.
of information from the Gracenote database.
3 Select “Audio”.
4 Select the desired items to
be set.
C Select to change the screen
Audio settings screen
D Select to display the image
size.* (P.122)
quality adjustment screen.*
(P.122)
*
: Only in USB video mode
Radio settings
1 Display the audio settings
screen. (P.144)
A Select to set the common
settings. (P.144)
B Select to set the radio set-
tings. (P.144)
2 Select “Radio”.
3 Select the desired items to
be set.
4-5. Setup
145
A Edit smart favorites.
(P.145)
4
B Select to change the number
Manage smart favorites
1 Select “Manage Smart
Favorites”.
2 Select the desired channel to
be set.
● Displays the registered preset
channels.
● Up to 20 channels can be regis-
tered.
Setting the number of radio
presets
1 Select “Number of Radio Presets”.
2 Select the button with the
desired number to be displayed.
Audio/visual system
of preset radio stations displayed on the screen.
(P.145)
146
4-6. Tips for operating the audio/visual system
Operating information
4-6.Tips for operating the audio/visual system
● The use of a cellular phone inside
or near the vehicle may cause a
noise from the speakers of the
audio/visual system which you are
listening to. However, this does
not indicate a malfunction.
NOTICE
● To avoid damage to the
audio/visual system:
• Be careful not to spill beverages
over the audio/visual system.
Radio
Usually, a problem with radio
reception does not mean there
is a problem with the radio  it
is just the normal result of conditions outside the vehicle.
For example, nearby buildings
and terrain can interfere with FM
reception. Power lines or phone
wires can interfere with AM signals. And of course, radio signals have a limited range. The
farther the vehicle is from a station, the weaker its signal will
be. In addition, reception conditions change constantly as the
vehicle moves.
Here are some common reception problems that may not indicate a problem with the radio as
described.
■ FM
Fading and drifting stations:
Generally, the effective range of
FM is about 25 miles (40 km).
Once outside this range, you
may notice fading and drifting,
which increase with the distance
from the radio transmitter. They
are often accompanied by distortion.
Multi-path: FM signals are
reflective, making it possible for
2 signals to reach the vehicle’s
antenna at the same time. If this
happens, the signals will cancel
each other out, causing a
momentary flutter or loss of
reception.
Static and fluttering: These
occur when signals are blocked
by buildings, trees or other large
objects. Increasing the bass
level may reduce static and fluttering.
Station swapping: If the FM signal being listened to is interrupted or weakened, and there
is another strong station nearby
on the FM band, the radio may
tune in the second station until
the original signal can be picked
up again.
■ AM
Fading: AM broadcasts are
reflected by the upper atmosphere  especially at night.
These reflected signals can
interfere with those received
directly from the radio station,
causing the radio station to
sound alternately strong and
weak.
4-6. Tips for operating the audio/visual system
Station interference: When a
reflected signal and a signal
received directly from a radio
station are very nearly the same
frequency, they can interfere
with each other, making it difficult to hear the broadcast.
■ SiriusXM
 Cargo loaded on the roof luggage carrier, especially metal
objects, may adversely affect
the reception of SiriusXM Satellite Radio.
 Alternation or modifications
carried out without appropriate authorization may invalidate the user’s right to
operate the equipment.
iPod
■ Certification
 Use of the Made for Apple
badge means that an accessory has been designed to
connect specifically to the
Apple product(s) identified in
the badge, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this
device or its compliance with
safety and regulatory standards. Please note that the
use of this accessory with an
Apple product may affect
wireless performance.
 iPhone, iPod, iPod classic,
iPod nano, iPod touch, and
Lightning are trademarks of
Apple Inc., registered in the
U.S. and other countries.
■ Compatible models
The following iPod nano®, iPod
touch® and iPhone® devices
can be used with this system.
Made for
• iPhone 7
• iPhone 7 Plus
• iPhone SE
• iPhone 6s
• iPhone 6s Plus
• iPhone 6
4
Audio/visual system
Static: AM is easily affected by
external sources of electrical
noise, such as high tension
power lines, lightening or electrical motors. This results in static.
147
148
•
•
•
•
•
•
•
•
4-6. Tips for operating the audio/visual system
iPhone 6 Plus
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4s
iPod touch (6th generation)
iPod touch (5th generation)
iPod nano (7th generation)
File formats
FAT 16/32
Correspondence class
Mass storage
class
Compatible audio format
Compatible compressed files
● This system only supports audio
Item
playback.
● Depending on difference between
models or software versions etc.,
some models might be incompatible with this system.
MP3/WMA/AAC
Compatible file
format
High-resolution sound
source
WAV(LPCM)/FL
AC/ALAC/OGG
Vorbis
MP4/AVI/WMV
This device supports high-resolution sound sources.
The definition of high-resolution
is based on the standards of
groups such as the CTA (Consumer Technology Association).
Supported formats and playable media are as follows.
USB
*:
Compatible file
format (video)*
MP4/AVI/WMV
Folders in the
device
Maximum
3000
Files in the
device
Maximum
9999
Files per folder
Maximum
255
USB video only
■ Supported formats
WAV, FLAC, ALAC, OGG Vorbis
■ Playable media
USB
File information
Compatible USB devices
USB communication formats
USB 2.0 HS (480
Mbps)
Corresponding sampling frequency
File type
Frequency (kHz)
MP3 files:
MPEG 1 LAYER
3
32/44.1/48
MP3 files:
MPEG 2 LSF
LAYER 3
16/22.05/24
4-6. Tips for operating the audio/visual system
File type
WMA files:
Ver. 7, 8, 9*1
(9.1/9.2)
AAC files:
MPEG4/AAC-LC
Frequency (kHz)
32/44.1/48
11.025/12/16/
22.05/24/32/
44.1/48
8/11.025/12/16/
22.05/24/32/
44.1/48/88.2/
96/176.4/192
FLAC*2
8/11.025/12/16/
22.05/24/32/
44.1/48/88.2/
96/176.4/192
8/11.025/12/16/
22.05/24/32/
44.1/48/64/
88.2/96
ALAC*2
OGG Vorbis
*2
8/11.025/16/
22.05/32/44.1/
48
*1
: Only compatible with Windows
Media Audio Standard
*2
: Sound source of 48kHz or more
is down-converted to
48kHz/24bit.
Corresponding bit rates*1
File type
Bit rate (kbps)
MP3 files:
MPEG 1 LAYER
3
32 - 320
MP3 files:
MPEG 2 LSF
LAYER 3
8 - 160
Bit rate (kbps)
WMA files: Ver.
7, 8
CBR 48 - 192
WMA files:
Ver. 9*2 (9.1/9.2)
CBR 48 - 320
AAC files:
MPEG4/AAC-LC
8 - 320
OGG Vorbis
32-500
*1
: Variable Bit Rate (VBR) compatible
*2
: Only compatible with Windows
Media Audio Standard
File type
Quantization bit
rate (bit)
WAV (LPCM)
files
16/24
FLAC
ALAC
Compatible channel modes
File type
Channel mode
MP3 files
Stereo, joint stereo, dual channel and
monaural
WMA files
2ch
AAC files
1ch, 2ch (Dual
channel is not
supported)
WAV (LPCM)/
FLAC/ALAC/
OGG Vorbis
2ch
 MP3 (MPEG Audio Layer 3),
WMA (Windows Media Audio)
4
Audio/visual system
WAV (LPCM)
files*2
File type
149
150
4-6. Tips for operating the audio/visual system
and AAC (Advanced Audio
Coding) are audio compression standards.
 This system can play
MP3/WMA/AAC files on USB
memory.
 MP4, WMV and AVI files can
use the following resolutions:
128x96, 160x120, 176x144
(QCIF), 320x240 (QVGA),
352x240 (SIF), 352x288
(CIF), 640x480 (VGA),
720x480 (NTSC), 720x576
(PAL)
 When naming an
MP3/WMA/AAC file, add an
appropriate file extension
(.mp3/.wma/.m4a).
 This system plays back files
with .mp3/.wma/.m4a file
extensions as
MP3/WMA/AAC files respectively. To prevent noise and
playback errors, use the
appropriate file extension.
 MP3 files are compatible with
the ID3 Tag Ver. 1.0, Ver. 1.1,
Ver. 2.2 and Ver. 2.3 formats.
This system cannot display
disc title, track title and artist
name in other formats.
 WMA/AAC files can contain a
WMA/AAC tag that is used in
the same way as an ID3 tag.
WMA/AAC tags carry information such as track title and
artist name.
 The emphasis function is
available only when playing
MP3 files.
 This system can play back
AAC files encoded by iTunes.
 The sound quality of
MP3/WMA files generally
improves with higher bit rates.
 m3u playlists are not compatible with the audio player.
 MP3i (MP3 interactive) and
MP3PRO formats are not
compatible with the audio
player.
 The player is compatible with
VBR (Variable Bit Rate).
 When playing back files
recorded as VBR (Variable Bit
Rate) files, the play time will
not be correctly displayed if
the fast forward or reverse
operations are used.
 It is not possible to check folders that do not include
MP3/WMA/AAC files.
 MP3/WMA/AAC files in folders up to 8 levels deep can be
played. However, the start of
playback may be delayed
when using USB memory
containing numerous levels of
folders. For this reason, we
recommend creating USB
memory with no more than 2
levels of folders.
4-6. Tips for operating the audio/visual system
151
Compatible video format
Format
Codec
Video codec:
 H.264/MPEG4 AVC
 MPEG4
 The play order of the USB
memory with the structure
shown above is as follows:
MPEG-4
Audio codec:
 AAC
 MP3
Corresponding
frame rate:
 MAX 60i/30p
 The order changes depending
on the personal computer and
MP3/WMA/AAC encoding
software you use.
Audio/visual system
Corresponding
screen size:
 MAX
19201080
4
152
4-6. Tips for operating the audio/visual system
Format
Codec
Video codec:
 H.264/MPEG4 AVC
 MPEG4
 WMV9
 WMV9
Advanced profile
AVI Container
Audio codec:
 AAC
 MP3
 WMA9.2
(7,8,9.1,9.2)
Corresponding
screen size:
 MAX
19201080
Corresponding
frame rate:
 MAX 60i/30p
Video codec:
 WMV9
 WMV9
Advanced profile
Audio codec:
 WMA9.2
Windows Media
(7,8,9.1,9.2)
Video
Corresponding
screen size:
 MAX
19201080
Corresponding
frame rate:
 MAX 60i/30p
Terms
■ ID3 tag
 This is a method of embed-
ding track related information
in an MP3 file. This embedded information can include
the track number, track title,
the artist’s name, the album
title, the music genre, the year
of production, comments,
cover art and other data. The
contents can be freely edited
using software with ID3 tag
editing functions. Although
the tags are restricted to a
number of characters, the
information can be viewed
when the track is played back.
■ WMA tag
 WMA files can contain a
WMA tag that is used in the
same way as an ID3 tag.
WMA tags carry information
such as track title and artist
name.
■ MP3
 MP3 is an audio compression
standard determined by a
working group (MPEG) of the
ISO (International Standard
Organization). MP3 compresses audio data to about
1/10 the size of that on conventional discs.
■ WMA
 WMA (Windows Media Audio)
is an audio compression format developed by Microsoft®.
It compresses files into a size
smaller than that of MP3 files.
The decoding formats for
4-6. Tips for operating the audio/visual system
WMA files are Ver. 7, 8 and 9.
Message
■ AAC
 AAC is short for Advanced
Audio Coding and refers to an
audio compression technology standard used with
MPEG2 and MPEG4.
“Please check
the iPod firmware version.”
Error messages
■ USB
Explanation
“USB Error”
This indicates a
problem in the
USB memory or
its connection.
“No music files
found.”
This indicates
that no
MP3/WMA/AAC
files are included
in the USB memory.
“No video files
found.”
This indicates
that no video
files are included
in the USB memory.
■ iPod
Message
Explanation
“iPod Error”
This indicates a
problem in the
iPod or its connection.
“No music files
found.”
This indicates
that there is no
music data in the
iPod.
Explanation
This indicates
that the firmware version is
not compatible.
Perform the iPod
firmware
updates and try
again.
This indicates
that it failed to
authorize the
iPod.
Please check
your iPod.
■ Bluetooth® audio
Message
“Music tracks not
supported.
Please check
your portable
player.”
Explanation
This indicates a
problem in the
Bluetooth®
device.
● If the malfunction is not rectified:
Take your vehicle to your Toyota
dealer.
4
Audio/visual system
Message
“Unable to
authorize the
iPod.”
153
154
4-6. Tips for operating the audio/visual system
155
Voice command system
5
5-1. Voice command system
operation
Voice command system
.................................. 156
Natural language understanding..................... 159
Command list .............. 160
5-2. Mobile Assistant operation
Voice command system
Mobile Assistant .......... 165
5
156
5-1. Voice command system operation
Voice command system
5-1.Voice command system operation
The voice command system enables the radio,
phone dialing, etc. to be
operated using voice commands. Refer to the command list for samples of
voice commands. (P.160)
Using the voice command
system
■ Steering switch
A Talk switch
Voice command system:
• Press the talk switch to start the
voice command system. To cancel voice command, press and
hold the talk switch.
When an Apple CarPlay connection
is established:
• Press and hold the talk switch to
start Siri. To cancel Siri, press the
talk switch.
• Press the talk switch to start the
voice command system.
■ Microphone
 It is unnecessary to speak
directly into the microphone
when giving a command.
● Voice commands may not be rec-
ognized if:
Spoken too quickly.
Spoken at a low or high volume.
The roof or windows are open.
Passengers are talking while
voice commands are spoken.
• The fan speed of the air conditioning system is set at high.
• The air conditioning vents are
turned towards the microphone.
● In the following conditions, the
system may not recognize the
command properly and using
voice commands may not be possible:
• The command is incorrect or
unclear. Note that certain words,
accents or speech patterns may
be difficult for the system to recognize.
• There is excessive background
noise, such as wind noise.
● Normally, it is necessary to wait
for a beep before saying a command. To enable the ability to talk
over prompts and say commands
before the beep, enable the voice
prompt interrupt function. (P.60)
● This system may not operate
immediately after the engine
switch <power switch> is in ACC
or ON.
•
•
•
•
5-1. Voice command system operation
NOTICE
● Do not touch and put a sharp
object to the microphone. It may
cause failure.
Voice command system
operation
Operation from the main
menu
1 Press the talk switch.
3 After hearing a beep, say a
supported command.
 To display sample commands
of the desired function, say
the desired function or select
the desired function button. To
display more commands,
select “More Commands”.
 Selecting “Help” or saying
“Help” prompts the voice command system to offer examples of commands and
operation methods.
 Registered POIs, registered
names in the contacts list etc.,
can be said in the place of the
“<>” next to the commands.
(P.160)
For example: Say “Find a restaurant”, “Call John Smith” etc.
 If a desired outcome is not
shown, or if no selections are
available, perform one of the
following to return to the previous screen:
• Say “Go back”.
• Select
.
 To cancel voice recognition,
 Voice guidance for the voice
command system can be
skipped by pressing the talk
switch.
2 If “Getting Started with Voice”
screen is displayed, select
“OK” or press the talk switch.
(P.158)
select
, say “Cancel”, or
press and hold the talk switch.
 To perform the voice command operation again, select
“Start Over” or say “Start
over”.
 To suspend voice command
operation, select “Pause” or
say “Pause”. To resume the
5
Voice command system
The voice command system is
operated by saying commands
which correspond to a supported function. To display
examples of commands for supported functions, select a function button on the screen after
starting the voice command system.
157
158
5-1. Voice command system operation
voice command operation,
select “Resume” or press the
talk switch.
● If the system does not respond or
the confirmation screen does not
disappear, press the talk switch
and try again.
● If a voice command cannot be recognized, voice guidance will say
“Sorry, could you repeat that?”
and voice command reception will
restart.
● If a voice command cannot be recognized 3 consecutive times,
voice recognition will be canceled.
● Voice recognition prompts can be
changed on the voice settings
screen. (P.60)
This function can be used to cancel
voice guidance by turning the voice
prompts off. When you press the
talk switch while using this setting, a
beep sounds, and then you can
immediately say a command.
● Some voice guidance can be can-
celed by setting voice prompts to
off. Use this setting when it is
desirable to say a command
immediately after pressing the talk
switch and hearing a beep.
screen. (P.60)
1 Press the talk switch.
2 Select the desired item to be
set.
A Select to display the voice
command tutorials.
B Select to train the voice com-
mand system.
The user will be asked to say 10
sample phrases. This will help the
voice command system adapt to
the user’s accent.
C Select to prevent the screen
from being displayed again.
D Select to proceed to the
voice command screen.
Dictation function (English
only)*
Increasing the voice recognition performance
To increase voice recognition
performance, use the “Tutorials” and “Voice Training” functions on the “Getting Started
with Voice” screen. These functions are only available when
the vehicle is not moving.
The “Tutorials” and “Voice Training” functions can also be
started on the voice settings
*:
Entune Premium Audio with DCM
only. This function is not made
available in some countries or
areas.
Text messages can be written
using the dictation function.
To use the dictation function, a
subscription to the Toyota
Entune is necessary. Contact
your Toyota dealer for details.
5-1. Voice command system operation
1 Select
Natural language
understanding*
.
*
2 Speak to the system.
 Words recognized through
your speech will be displayed.
To confirm the entered text,
select “OK”.
played when the vehicle is being
driven.
● Text message reply with the dictation function may not be available
depending on the type of cellular
phone.
: Entune Premium Audio with DCM
only. This function is not made
available in some countries or
areas.
Due to natural language
speech recognition technology, this system recognizes
commands when spoken
naturally. (If a Toyota Entune
subscription has been
entered, the system will be
able to connect to the Toyota Entune center and the
range of naturally spoken
English which can be recognized will be increased.)
However, the system cannot
recognize every variation of
each command. In some situations, it is possible to
omit the command for the
procedure and directly state
the desired operation. Not
all voice commands are displayed in the function menu.
To use this function, a subscription to the Toyota
Entune is necessary. Contact your Toyota dealer for
details.
5
Voice command system
● A keyboard screen will not be dis-
159
160
5-1. Voice command system operation
Command list
Command
Action
“Start over”
Returns to top
menu screen
Recognizable voice commands
and their actions are shown
below.
“Pause”
 Frequently used commands
are listed in the following
tables.
Temporarily
pauses a voice
session until it is
resumed by
pressing the talk
switch again.
■ Top menu
Command list overview
 For devices that are not
installed to the vehicle, commands relating to that device
may not be displayed on the
screen. Also, depending on
other conditions, such as
compatibility, some commands may not be displayed
on the screen.
 The functions available may
vary according to the system
installed.
 Voice recognition language
can be changed. (P.56)
Command
Displays the
“Show comcommand list of
mand examples
the selected
for <menu>”
menu
“More commands”
Displays more
commonly used
commands
“Voice settings”
Displays Voice
Setting screen
Displays Train
“Train my voice” Voice Recognition screen*
*:
Command list
“Help”
Vehicle must be parked
■ Navigation*1
■ Common
Command
Action
Command
Action
Displays examples of some of
the available
commands
“Go back”
Returns to the
previous screen
“Cancel”
Cancels the
voice command
system
Action
Enables setting
“Get directions to
a destination by
<house #, street,
saying the
city, state>”*2
address*3, 4
Displays a list of
<POI cate“Find a <POI catgory*5/POI
egory/POI
name*6> near
name>”
the current position
5-1. Voice command system operation
Command
Action
“Find a <POI>
Displays a list of
near my destina- <POI> near the
tion”
destination
Displays a list of
“Find a <POI cat<POI> in a specegory> in a
ified city and
city”*2
state*7
Displays the
route to home
“Go to favorite
<1-10>”
Sets the location
registered to the
corresponding
favorite number
as the destination
“Show recent
destinations”
“Cancel route”
Displays recent
destinations.
Selecting a number from the list
will start navigation to the
selected recent
destination.
Cancels the
route guidance
Displays a list of
“Delete destina- destination to
tions”
delete*8
Displays the
specified point of
“Show <POI cat- interest cateegory> icons”
gory*5 icons on
the map
*1
: Entune Premium Audio only
*2
: English and French only
*3: Best
recognition results occur
when saying the full address
without the zipcode
*4: When
the language is set to
French, the supported area is
only Quebec Province in Canada
*5
: For example; “Gas stations”,
“Restaurants”, etc.
*6
: Major national brands are always
supported. Local brands are also
supported with a subscription to
the Toyota Entune. Contact your
Toyota dealer for details.
*7: When
the language is set to
French, the supported area is
only Quebec City in Canada
*8
: Used when multiple destinations
are set on a route
■ Phone*1
Command
“Call <contact>”*2
Action
Places a call to
the specified
contact from the
phone book
Places a call to
“Call <contact> the specified
phone type of
<phone type>”*2 the contact from
the phone book
“Dial <phone
number>”
Places a call to
the specified
phone number
“Redial”
Places a call to
the phone number of the latest
outgoing call
“Call back”
Places a call to
the phone number of latest
incoming call
5
Voice command system
“Go home”
161
162
5-1. Voice command system operation
Command
Action
“Show recent
calls”
Displays the call
history screen
“Send a message to <contact>”
Sends a text
message to
specified contact from the
phone book
*1: When
an Apple CarPlay connection is established, this voice
commands will be unavailable.
*2
: If the system does not recognize
the name of a contact, create a
voice tag. (P.190) The name of
a contact can also be recognized
by adding a voice tag.
■ While in a phone call*
Command
“Send <digits>”
“Mute”
Mutes the microphone (far side
cannot hear the
conversation)
*:
notification is displayed*1, 2
Command
Unmutes the
microphone
When an Apple CarPlay connection is established, this voice
commands will be unavailable.
Action
Reads the
incoming mes“Read message”
sage over the
vehicle speakers
“Ignore”
Ignores the
incoming message notification
“Reply”
Initiates sending
a reply to the
incoming message
“Call”
Places a call to
the phone number of incoming
message
Action
Sends DTMF
tones has specified
“Unmute”
■ While incoming message
*1
: Full screen message notification
must be turned on within the
phone settings (P.188)
*2: When
an Apple CarPlay connection is established, this voice
commands will be unavailable.
■ Radio
Command
Action
“Tune to <frequency> AM”
Changes the
radio to the
specified AM frequency
“Tune to <frequency> FM”
Changes the
radio to the
specified FM frequency
Changes the
“Play a <genre> radio to an FM
station of the
station”
specified genre*1
5-1. Voice command system operation
Command
Action
Changes the
radio to the
specified preset
radio station
“Tune to a
<genre> satellite station”
Changes the
radio to a satellite radio channel
of the specified
genre*2
“Tune to <satellite channel
name>”
Changes the
radio to the satellite radio channel with the
specified name*2
Changes the
radio to a satel“Tune to channel <number> on lite radio channel
of the specified
XM”
number*2
*1
*2
: A station list must be built first
using the radio screen (P.123)
: Requires a satellite radio subscription
Action
Plays tracks
from the
selected genre
Plays tracks
“Play Composer from the
selected com<name>”*2
poser
“Play Podcast
<name>”*2
Plays tracks
from the
selected podcast
Plays tracks
“Play Audiobook from the
selected audio<name>”*2
book
“Audio On”
Turns the
audio/visual system on
“Audio Off”
Turns the
audio/visual system off
“Change the
Sets the source
audio source to to the specified
<source name>” audio mode
*1
■ Audio*1
Command
“Play Genre
<name>”*2
Action
: The audio device must be connected via a USB cable to use
the functionality in this section
“Play Playlist
<name>”*2
Plays tracks
from the
selected playlist
*2: When
“Play Artist
<name>”*2
Plays tracks
from the
selected artist
■ Information*1
“Play Song
<name>”*2
Plays the
selected track
“Get the Forecast”
“Play Album
<name>”*2
Plays tracks
from the
selected album
Displays weather
“Get the Forefor the specified
cast for <city>”*2 city
an Apple CarPlay connection is established, this voice
commands will be unavailable.
Command
Action
Displays weather
information
5
Voice command system
“Tune to preset
<1-36>”
Command
163
164
5-1. Voice command system operation
Command
Action
“Show Traffic”
Displays traffic
information
“Show Traffic
near here”
Displays traffic
information near
your current
location
Displays traffic
“Get traffic along information
my route”
along your current route
Displays traffic
information
“Show Traffic on
along road you
this street”
are currently
driving on
Displays traffic
“Show Traffic for
information for a
saved route”
saved route
“Show Predictive Traffic”
*1
Displays the predictive traffic
map
: Entune Premium Audio only
*2: Only
major US cities are supported by voice
■ Apps*1
Command
Action
Activates the
“Launch <appli- Toyota Entune
cation name>”*2 App Suite Connect application
*1: When
an Apple CarPlay connection is established, this voice
commands will be unavailable.
*2
: When an application is opened
and is in full screen mode, pressing the talk switch will start the
voice command system and
commands for the currently displayed application will be available
● Commands relating to operation
of the audio/visual system can
only be performed when the
audio/visual system is turned on.
5-2. Mobile Assistant operation
Mobile Assistant
5-2.Mobile Assistant operation
Connectable devices and
available functions
Mobile Assist supports the Siri
Eyes Free Mode and Google
App. The available features and
functions may vary based on the
iOS/Android version installed on
the connected device.
Mobile Assistant operation
Type A
1 Press and hold the talk
switch on the steering wheel
until Mobile Assistant screen
is displayed.

5

Type B
1 Press and hold the
switch
on the steering wheel until
Mobile Assistant screen is
displayed.
Voice command system
The Mobile Assistant function is a voice input assist
function. Mobile Assist supports the Siri Eyes Free
Mode and Google App.
(Google App can be used
only with the corresponding
device.) Instructions can be
spoken into the vehicle
microphone as if speaking a
command to the phone. The
content of the request is
then interpreted by the
phone and the result is output from the vehicle speakers. To operate the Mobile
Assistant, a compatible
device must be registered
and connected to this system via Bluetooth®. (P.36)
When an Apple CarPlay
connection is established,
this function will be unavailable.
165
166
5-2. Mobile Assistant operation
2 The Mobile Assistant can be
used only when the following
screen is displayed.
Mobile Assistant and phone
call volumes are synchronized.
● While a phone call is active, the
 Type A: To cancel the Mobile
Assistant, select “Cancel” or
press and hold the talk switch
on the steering wheel.
Type B: To cancel the Mobile
Assistant, select “Cancel” or
press and hold the
switch
on the steering wheel.
 Type A: To restart the Mobile
Assistant for additional commands, press the talk switch
on the steering wheel.
Type B: To restart the Mobile
Assistant for additional commands, press the
switch
on the steering wheel.
• Mobile Assistant can only be
restarted after the system
responds to a voice command.
• After some phone and music
commands, the Mobile Assistant
feature will automatically end to
complete the requested action.
 The volume of the Mobile
Assistant can be adjusted
using the “POWER VOLUME”
knob or steering wheel volume control switches. The
Mobile Assistant cannot be used.
● If using the navigation feature of
the cellular phone, ensure the
active audio source is Bluetooth®
audio or iPod in order to hear turn
by turn direction prompts.
● Wait for the listening beeps before
using the Mobile Assistant.
● The Mobile Assistant may not recognize commands in the following
situations:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while the
Mobile Assistant is being used.
• The fan speed of the air conditioning system is set at high.
• The air conditioning vents are
turned toward the microphone.
167
Information
6
6-1. Information display
Receiving weather information ............................ 168
Data services settings . 170
6
Information
168
6-1. Information display
Receiving weather
information*
6-1.Information display
*
: Entune Premium Audio only
Weather information can be
received via HD Radio
broadcast or DCM (Data
Communication Module).
Displaying weather
screen
1 Press the “MENU” button.
weather forecast for the currently displayed location. To
view the details of a specific
day, select the date.
C Select to display the weather
information for the next 6
hours and 12 hours. (This
button is not displayed when
a location is selected from
the “National Cities” list of
“National/Local”.)
D Select to display the weather
of a desired location in the
recently checked locations
list.
E Select to change the dis-
played weather location. A
location can be selected from
two different lists: a list of
national cities and a list of
local cities. (P.169)
2 Select “Info”.
3 Select “Weather”.
4 Check that the weather
screen is displayed.
F Select to display Doppler
weather radar information
over the map.
● This function is not made avail-
able in some countries or areas.
● The weather for current location
A Select to display the current
weather information.
(P.169)
B Select to display a 3-day
might not show the closest city
when it first displays.
● The weather information is
updated every 5 to 90 minutes.
The time elapsed since the last
update is displayed at the bottom
right corner of the screen. If the
weather has been updated less
than 5 minutes ago, “Now” will be
displayed.
6-1. Information display
Displaying weather information for the current
location
1 Display the weather screen.
(P.168)
2 Select “Current”.
3 Check the weather information for the current location.
 By selecting “3 Day” or “6/12
Hour”, different types of
weather information for the
current location will be displayed.
169
 After selecting a location, the
current weather information
will be displayed. By selecting
“3 Day” or “6/12 Hour”, the different type of weather information for the selected
location is displayed.
Weather guidance service
3 Select the desired item to be
set.
2 Check that the weather information is displayed.
Selecting a location
1 Display the weather screen.
(P.168)
 The time since the information
was last updated is displayed.
A Select to display the list of
National cities. When the list
is displayed, select the
desired area.
B Select to display the list of
local cities.
4 Select the desired location
from the list.
 When detailed audio weather
information is available, an
icon will be displayed on the
weather map. Select the icon
to listen to the weather information.
6
Information
2 Select “National/Local”.
When weather information for
areas around the current position, destination, or along the set
route is available, important
information will be output
through the speakers and a popup message asking if you would
like to view the full weather
information will be displayed.
1 Select “Yes” when the pop-up
message appears.
170
6-1. Information display
Data services settings*
*
5 Select the desired item to be
set.
: Entune Premium Audio only
Data service information,
which is comprised of traffic
information and weather
information, can be
received via HD Radio
broadcast or DCM (Data
Communication Module).
The receiving method can
be set to both or only via HD
Radio broadcast.
Setting download methods
1 Press the “MENU” button.
A Select to receive data service
information via both HD
Radio broadcast and the
DCM. When both methods
are available, HD Radio
broadcast will be selected.
B Select to receive data only
via HD Radio broadcast.
● This function is not made avail-
able in some countries or areas.
2 Select “Setup”.
3 Select “Data Services”.
4 Select “Data Download
Source”.
171
Phone
7
7-1. Phone operation (Handsfree system for cellular
phones)
Quick reference........... 172
Some basics ............... 173
Placing a call using the
Bluetooth® hands-free system ............................ 177
Receiving a call using the
Bluetooth® hands-free system ............................ 180
Talking on the Bluetooth®
hands-free system..... 181
7-2. Setup
Phone settings ............ 188
7-3. What to do if...
Troubleshooting .......... 198
7
Phone
Bluetooth® phone message
function...................... 184
172
7-1. Phone operation (Hands-free system for cellular phones)
Quick reference
7-1.Phone operation (Hands-free system for cellular phones)
Message function
Phone screen operation
The following function can be
used on message function:
The phone screen can be
reached by the following methods:
 Using the Bluetooth® phone
message function (P.184)
From the “PHONE” button
1 Press the “PHONE” button.

From the “MENU” button
1 Press the “MENU” button,
then select “Phone”.

Bluetooth® hands-free
system operation
The following functions can be
used on phone operation:
 Registering/connecting a
Bluetooth® device (P.36)
 Placing a call using the Bluetooth® hands-free system
(P.177)
 Receiving a call using the
Bluetooth® hands-free system
(P.180)
 Talking on the Bluetooth®
hands-free system (P.181)
Setting up a phone
The following functions can be
made in the system:
 Phone settings (P.188)
 Bluetooth® settings (P.40)
7-1. Phone operation (Hands-free system for cellular phones)
Some basics
The hands-free system
enables calls to be made
and received without having
to take your hands off the
steering wheel.
This system supports Bluetooth®. Bluetooth® is a wireless data system that
enables cellular phones to
be used without being connected by a cable or placed
in a cradle.
The operating procedure of
the phone is explained here.
● This system is not guaranteed to
operate with all Bluetooth®
devices.
● If your cellular phone does not
support Bluetooth®, this system
cannot function.
● In the following conditions, the
system may not function:
• The cellular phone is turned off.
• The current position is outside the
communication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
● Depending on the type of Bluetooth® phone, some function is
not available.
● When using the hands-free sys-
tem or Bluetooth® audio and
Wi-Fi® Hotspot functions at the
same time, the following problems
may occur:
• The Bluetooth® connection may
be cut.
• Noise may be heard on the Bluetooth® audio playback.
• A noise may be heard during
phone calls.
● Bluetooth® uses the 2.4 GHz fre-
quency band. If both a Wi-Fi® connection and Bluetooth®
connection are being used simultaneously, each connection may
be affected.
● If a Bluetooth® device is attempt-
ing to connect to the vehicle while
another device is connected as a
Bluetooth® audio device or connected using the hands-free system or Wi-Fi® Hotspot function,
the communication speed may
decrease or malfunctions may
occur, such as image distortion or
audio skipping. If a Bluetooth®
device is connected to the system,
the interference it may cause will
be reduced. When carrying a
device with its Bluetooth® connection enabled, make sure to register it to the system and connect it
or disable its Bluetooth® function.
● When a device is connected via
Bluetooth®, the Bluetooth® icon
on the status bar will be displayed
in blue. (P.16)
WARNING
● While driving, do not operate a
cellular phone.
7
Phone
When an Apple CarPlay
connection is established,
phone functions will be performed by Apple CarPlay
instead of the hands-free
system.
173
174
7-1. Phone operation (Hands-free system for cellular phones)
WARNING
● Your audio unit is fitted with
®
Bluetooth antennas. People
with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or
implantable cardioverter defibrillators should maintain a reasonable distance between
themselves and the Bluetooth®
antennas. The radio waves may
affect the operation of such
devices.
● Before using Bluetooth®
devices, users of any electrical
medical device other than
implantable cardiac pacemakers, cardiac resynchronization
therapy-pacemakers or implantable cardioverter defibrillators
should consult the manufacturer
of the device for information
about its operation under the
influence of radio waves. Radio
waves could have unexpected
effects on the operation of such
medical devices.
NOTICE
● Do not leave your cellular phone
in the vehicle. The temperature
inside may rise to a level that
could damage the phone.
Registering/Connecting a
Bluetooth® phone
To use the hands-free system
for cellular phones, it is necessary to register a cellular phone
with the system. (P.36)
■ Connecting a Bluetooth®
device
Registering an additional
device
1 Display the phone top
screen. (P.172)

2 Select “Select Device”.
3 Select “Add Device”.
 When another Bluetooth®
device is connected, a confirmation screen will be displayed. To disconnect the
Bluetooth® device, select
“Yes”.
4 Follow the steps in “Registering a Bluetooth® phone for
the first time” from step 5.
(P.36)
Selecting a registered device
1 Display the phone top
screen. (P.172)

2 Select “Select Device”.
3 Select the desired device to
be connected.
4 Check that a confirmation
screen is displayed when the
connection is complete.
 If an error message is displayed, follow the guidance
on the screen to try again.
■ Bluetooth® phone condition
display
The condition of the Bluetooth®
phone appears on the upper
right side of the screen. (P.16)
7-1. Phone operation (Hands-free system for cellular phones)
175
Using the phone
switch/microphone
■ Steering switch
By pressing the phone switch, a
call can be received or ended
without taking your hands off the
steering wheel.
● The other party’s voice will be
B Volume control switch
• Press the “+” side to increase the
volume.
• Press the “-” side to decrease the
volume.
■ Microphone
The microphone is used when
talking on the phone.
NOTICE
● Do not touch and put a sharp
object to the microphone. It may
cause failure.
7
Phone
A Phone switch
• If the switch is pressed during a
call, the call will end.
• If the switch is pressed when an
incoming call is received, the call
will be answered.
• If the switch is pressed during a
call when a separate incoming
call is waiting, the waiting call will
be answered.
• If the switch is pressed when an
Apple CarPlay connection is
established, the Apple CarPlay
phone application will be displayed on the system screen.
heard from the front speakers.
The audio/visual system will be
muted during phone calls or when
hands-free voice commands are
used.
● Talk alternately with the other
party on the phone. If both parties
speak at the same time, the other
party may not hear what has been
said. (This is not a malfunction.)
● Keep call volume down. Otherwise, the other party’s voice may
be audible outside the vehicle and
voice echo may increase. When
talking on the phone, speak
clearly towards the microphone.
● The other party may not hear you
clearly when:
• Driving on an unpaved road.
(Making excessive traffic noise.)
• Driving at high speeds.
• The roof or windows are open.
• The air conditioning vents are
pointed towards the microphone.
• The sound of the air conditioning
fan is loud.
• There is a negative effect on
sound quality due to the phone
and/or network being used.
176
7-1. Phone operation (Hands-free system for cellular phones)
Voice command system
Press this switch to operate the
voice command system.
tered when the hands-free system is used. When selling or
disposing of the vehicle, initialize the data. (P.59)
 The following data in the system can be initialized:
• Contact data
• Call history data
• Favorites data
• Image data
• All phone settings
 The voice command system
and its list of commands can
be operated. (P.156)
About the contacts in the
contact list
 The following data is stored
for every registered phone.
When another phone is connected, the following registered data cannot be read:
• Contact data
• Call history data
• Favorites data
• Image data
• All phone settings
• Message settings
● When a phone’s registration is
deleted, the above-mentioned
data is also deleted.
When selling or disposing
of the vehicle
A lot of personal data is regis-
• Message settings
● Once initialized, the data and set-
tings will be erased. Pay additional attention when initializing
the data.
7-1. Phone operation (Hands-free system for cellular phones)
Placing a call using
the Bluetooth® handsfree system
After a Bluetooth® phone
has been registered, a call
can be made using the
hands-free system. There
are several methods by
which a call can be made, as
described below.
Calling methods on the
Bluetooth® phone
1 Display the phone top
screen. (P.172)
2 Select the desired method to
call from.
phone screen
 By call history (P.177)
 By favorites (P.178)
 By contacts (P.178)
 By keypad (P.179)
 By message (P.187)
■ Also the following lists are
available from each function’s screen
 By POI call* (P.76)
 By voice command system
(P.157)
 By home screen (P.180)
*
: Entune Premium Audio only
By call history
Up to 30 of the latest call history
items (missed, incoming and
outgoing) can be selected.
1 Display the phone top
screen. (P.172)
2 Select “History” and select
the desired contact.
 If the contact which is not registered on the contact list is
selected, the name is displayed as “Unknown Contact”. In this case, select the
number to make a call properly.
3 Check that the dialing screen
is displayed.
● The icons of call type are dis-
played.
: Missed call
: Incoming call
: Outgoing call
● When making a call to the same
number continuously, only the
most recent call is listed in call history.
● When a phone number registered
in the contact list is received, the
name is displayed.
● Number-withheld calls are also
memorized in the system.
● International phone calls may not
be made depending on the type of
Bluetooth® phone you have.
● The list should group together
consecutive entries with the same
phone number and same call
type. For example, two calls from
John’s mobile would be displayed
7
Phone
■ Calling methods from
177
178
7-1. Phone operation (Hands-free system for cellular phones)
as follows: John (2)
3 Select the desired number.
By favorites list
Calls can be made using registered contacts which can be
selected from a contact list.
(P.178)
1 Display the phone top
screen. (P.172)
2 Select “Favorites” and select
the desired contact.
3 Select the desired number.
4 Check that the dialing screen
is displayed.
By contacts list
Calls can be made by using
contact data which is transferred
from a registered cellular phone.
(P.190)
Up to 5000 contacts (maximum
of 4 phone numbers, e-mail
addresses and addresses per
contact) can be registered in the
contact list.
1 Display the phone top
screen. (P.172)
2 Select “Contacts” and select
the desired contact.
“Add Favorite”/“Remove Favorite”:
Select to register/remove the contact in the favorites list. (P.194)
“E-mail Addresses”: Select to display all registered e-mail addresses
for the contact.
“Addresses”: Select to display all
registered addresses for the contact.
4 Check that the dialing screen
is displayed.
When the contact list is
empty
■ For PBAP compatible Blue-
tooth® phones when “Automatic Transfer” is set to on
(P.190)
 Contacts are transferred automatically.
7-1. Phone operation (Hands-free system for cellular phones)
■ For PBAP compatible Blue-
tooth®
phones when “Automatic Transfer” is set to off
(P.190)
1 Select the desired item.
179
tacts from the connected cellular phone.
Transfer the contact data to
the system using a Bluetooth® phone.
B Select to add a new contact
manually.
Follow the steps in “Registering a new contact to the contacts list” from step 2.
(P.193)
C Select to cancel transferring.
A Select to always transfer all
the contacts from a connected cellular phone automatically.
B Select to transfer all the con-
C Select to cancel transferring.
2 Check that a confirmation
screen is displayed when the
operation is complete.
■ For PBAP incompatible but
OPP compatible Bluetooth® phones
1 Select the desired item.
PBAP nor OPP compatible, the
contacts cannot be transferred
using Bluetooth®. But the contacts
can be transferred from USB
device. (P.192)
● Depending on the type of Bluetooth® phone:
• It may be necessary to perform
additional steps on the phone
when transferring contact data.
• The registered image in the contact list may not transfer depending on the type of Bluetooth®
phone connected.
By keypad
1 Display the phone top
screen. (P.172)
2 Select “Keypad” and enter
the phone number.
3 Select
or press the
switch on the steering wheel.
4 Check that the dialing screen
is displayed.
A Select to transfer the con-
● Depending on the type of Blue-
7
Phone
tacts from a connected cellular phone only once.
● If your cellular phone is neither
180
7-1. Phone operation (Hands-free system for cellular phones)
tooth® phone being connected, it
may be necessary to perform
additional steps on the phone.
Receiving a call using
the Bluetooth® handsfree system
By home screen
1 Display the home screen.
(P.29)
2 Select the desired contact.
3 Check that the dialing screen
is displayed.
■ Registering a new contact
1 Select and hold the screen
button to add a contact.
When a call is received, the
following screen is displayed with a sound.
Incoming calls
1 Select “Answer” or press the
switch on the steering
wheel to talk on the phone.
2 Select the desired contact.
3 Select the desired number.
● If there is no contact in the con-
tacts list, the contacts cannot be
registered at the home screen.
● The contact cannot be registered
at the home screen while driving.
“Decline”: Select to refuse to
receive the call.
To adjust the volume of a received
call: Turn the “POWER VOLUME”
knob, or use the volume control
switch on the steering wheel.
● The contact image picture can be
displayed only when the vehicle is
not moving.
● During international phone calls,
the other party’s name or number
may not be displayed correctly
depending on the type of Bluetooth® phone you have.
● The incoming call display mode
can be set. (P.189)
● The ringtone that has been set in
the sound settings screen can be
heard when there is an incoming
call. Depending on the type of
7-1. Phone operation (Hands-free system for cellular phones)
Bluetooth® phone, both the system and Bluetooth® phone may
ring simultaneously when there is
an incoming call. (P.188)
181
Talking on the Bluetooth® hands-free system
While talking on the phone,
the following screen is displayed. The operations outlined below can be
performed on this screen.
Call screen operation
7
to send tones. (P.182)
B Select to send tones. This
button only appears when a
number that contains a (w) is
dialed in hands-free mode.
(P.182)
C Select to adjust your voice
volume that the other party
hears from their speaker.
(P.182)
D Select to mute your voice to
the other party.
E Select to mute the Navigation
route guidance during a
phone call.*
F Select to change handset
Phone
A Select to display the keypad
182
7-1. Phone operation (Hands-free system for cellular phones)
modes between hands-free
and cellular phone.
G Select to put a call on hold.
To cancel this function, select
“Activate”.
H Select to hang up the phone.
*
: Entune Premium Audio only
● Changing from hands-free call to
cellular phone call is not possible
while driving.
● Only when the vehicle is not moving, the contact image can be displayed.
● When cellular phone call is
changed to hands-free call, the
hands-free screen will be displayed and its functions can be
operated on the screen.
● Changing between cellular phone
call and hands-free call can be
performed by operating the cellular phone directly.
● Transferring methods and operations will be different depending
on the type of cellular phone you
have.
● For the operation of the cellular
phone, see the manual that
comes with it.
Sending tones
■ By keypad
taining a (w) is registered in the
contact list.
This operation can be performed while driving.
1 Select “Release Tones”.
● A continuous tone signal is a char-
acter string that consists of numbers and the characters “p” or “w”.
(e.g. 056133w0123p#1)
● When the “p” pause tone is used,
the tone data up until the next
pause tone will be automatically
sent after 2 seconds have
elapsed. When the “w” pause tone
is used, the tone data up until the
next pause tone will be automatically sent after a user operation is
performed.
● Release tones can be used when
automated operation of a phone
based service such as an answering machine or bank phone service is desired. A phone number
with continuous tone signals can
be registered in the contact list.
● Tone data after a “w” pause tone
can be operated by voice command during a call.
Transmit volume setting
1 Select “Transmit Volume”.
2 Select the desired level for
the transmit volume.
This operation cannot be performed while driving.
1 Select “0-9”.
3 Select
to display previous screen.
2 Enter the desired number.
heard from the other party’s
speaker may be negatively
impacted.
● “Transmit Volume” is dimmed
when mute is on.
■ By selecting “Release
Tones”
“Release Tones” appear when a
continuous tone signal(s) con-
● The sound quality of the voice
7-1. Phone operation (Hands-free system for cellular phones)
Switching calls while a
call is in progress
 When there are no calls on
hold during a call: “Hold” is
displayed. When selected, the
current call is placed on hold.
183
● This function may not be available
depending on the type of Bluetooth® phone.
 When there is no current call,
but there is a call on hold:
“Activate” is displayed. When
selected, the system switches
to the call that was on hold.
 When there is another call on
hold during a call: “Swap
Calls” is displayed. When
selected, the current call is
placed on hold, and the system switches to the call that
was on hold.
depending on the type of cellular
phone.
Incoming call waiting
When a call is interrupted by a
third party while talking, the
incoming screen is displayed.
1 Select “Answer” or press the
switch on the steering
wheel to start talking with the
other party.
 To refuse to receive the call:
Select “Decline”.
 Each time “Swap Calls” is
selected, the party who is on
hold will be switched.
Phone
● This function may not be available
7
184
7-1. Phone operation (Hands-free system for cellular phones)
Bluetooth® phone
message function
Received messages can be
forwarded from the connected Bluetooth® phone,
enabling checking and
replying using the system.
Depending on the type of
Bluetooth® phone connected, received messages
may not be transferred to
the system.
If the phone does not support the message function,
this function cannot be
used. Even when the supported phone is used, reply
function may not be used.
Displaying the message
screen
1 Display the phone top
screen. (P.172)
screen.
 Account names are the
names of the accounts that
exist on the currently connected phone.
 The following functions can
be used on message function:
• Receiving a message
(P.184)
• Checking messages
(P.185)
• Replying to a message (dictation reply) (P.186)
• Replying to a message (quick
reply) (P.186)
• Calling the message sender
(P.187)
• Message settings (P.196)
Receiving a message
When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and
is ready to be operated on the
screen.
2 Select “Message”.
 A confirmation message
appears when the “Automatic
Message Transfer” function is
set to off (P.196), select
“Yes”.
3 Check that the message
screen is displayed.
A Select to check the message.
“Phone”: Select to change to phone
mode.
B Select to not open the mes-
 The account name is displayed on the left side of
C Select to call the message
sage.
sender.
7-1. Phone operation (Hands-free system for cellular phones)
● Depending on the type of Blue-
tooth®
phone used for receiving
messages, or its registration status with the system, some information may not be displayed.
● The pop-up screen is separately
available for incoming e-mail and
SMS/MMS messages under the
following conditions:
E-mail:
• “Incoming E-mail Display” is set to
“Full Screen”. (P.189)
• “E-mail Notification Pop-up” is set
to on. (P.189)
SMS/MMS:
• “Incoming SMS/MMS Display” is
set to “Full Screen”. (P.189)
• “SMS/MMS Notification Pop-up” is
set to on. (P.189)
● Depending on the type of Bluetooth® phone being connected, EMail function cannot be used via
Bluetooth®.
1 Display the message screen.
(P.184)
2 Select a desired account
name.
3 Select the desired message
from the list.
4 Check that the message is
displayed.
A Select to call the message
sender.
B Select to have messages
read out.
To cancel this function, select
“Stop”.
When “Automatic Message
Readout” is set to on, messages will be automatically
read out. (P.196)
C Select to display the previous
or next message.
D This function can be chosen
the method to reply message with “Dictation” or
“Quick Message”.
● Reading a text message is not
available while driving.
● Depending on the type of Bluetooth® phone being connected,
this function cannot be used.
● Depending on the type of Bluetooth® phone being connected, it
may be necessary to perform
additional steps on the phone.
● Messages are displayed in the
appropriate connected Bluetooth® phone’s registered mail
address folder. Select the desired
folder to be displayed.
● Only received messages on the
connected Bluetooth® phone can
be displayed.
● The text of the message is not displayed while driving.
● Turn the “POWER VOLUME”
knob, or use the volume control
switch on the steering wheel to
adjust the message read out volume.
● “Subject:” field is not shown on
7
Phone
Checking received messages
185
186
7-1. Phone operation (Hands-free system for cellular phones)
SMS case.
● E-mail only: Select “Mark Unread”
or “Mark Read” to mark mail
unread or read on the message
screen.
This function is available when
“Update Message Read Status on
Phone” is set to on. (P.196)
Replying to a message
(dictation reply)*
*
: If equipped
1 Display the message screen.
(P.184)
2 Select the desired message
from the list.
3 Select “Reply”.
4 Select “Dictation”.
5 When the “Say Your Message” screen is displayed,
speak message that you
want to send.
6 Select “Send” to send message.
“Cancel”: Select to cancel sending
the message.
“Retry”: Select to retry speaking
message that you want to send.
Replying to a message
(quick reply)
15 messages have already
been stored.
1 Display the message screen.
(P.184)
2 Select the desired message
from the list.
3 Select “Reply”.
4 Select “Quick Message”.
5 Select the desired message.
: Select to edit the message.
(P.186)
6 Select “Send”.
“Cancel”: Select to cancel sending
the message.
 While the message is being
sent, a sending message
screen is displayed.
7 Check that a confirmation
screen is displayed when the
operation is complete.
 If an error message is displayed, follow the guidance
on the screen to try again.
 While the message is being
sent, a sending message
screen is displayed.
● Depending on the type of Blue-
7 Check that a confirmation
screen is displayed when the
operation is complete.
■ Editing quick reply mes-
 If an error message is displayed, follow the guidance
on the screen to try again.
tooth® phone, reply function is not
available.
sages
This operation cannot be performed while driving.
1 Select
corresponding to
the desired message to edit.
7-1. Phone operation (Hands-free system for cellular phones)
2 Select “OK” when editing is
completed.
● To reset the edited quick reply
messages, select “Default”.
● Quick message 1 (“I am driving
and will arrive in approximately
[##] minutes.”)*:
This message cannot be edited
and will automatically fill in [##]
with the navigation calculated estimated time of arrival on the confirm message screen.
If there are waypoints set, [##] to
the next waypoint will be shown.
If there is no route currently set in
the navigation system, quick message 1 cannot be selected.
*
187
■ Calling from a number
within a message
Calls can be made to a number
identified in a message’s text
area.
This operation cannot be performed while driving.
1 Display the message screen.
(P.184)
2 Select the desired message.
3 Select the text area.
: Entune Premium Audio only
Calling the message
sender
7
 Identified phone numbers
contained in the message are
displayed in blue text.
This operation can be performed while driving.
4 Select the desired number.
■ Calling from e-
mail/SMS/MMS message
display
1 Display the message screen.
(P.184)
2 Select the desired message.
3 Select
, or press the
switch on the steering wheel.
 If there are 2 or more phone
numbers, select the desired
number.
4 Check that the dialing screen
is displayed.
5 Check that the dialing screen
is displayed.
● A series of numbers may be rec-
ognized as a phone number. Additionally, some phone numbers
may not be recognized, such as
those for other countries.
■ Calling from the incoming
message screen
For detail, refer to “Receiving a
message”. (P.184)
Phone
Calls can be made to an email/SMS/MMS message
sender’s phone number.
188
7-2. Setup
(P.190)
Phone settings
7-2.Setup
E Message settings* (P.196)
Displaying the phone settings screen
1 Press the “MENU” button.
*
: This operation cannot be performed while driving.
Sounds settings screen
The call and ringtone volume
can be adjusted. A ringtone can
be selected.
1 Display the phone settings
screen. (P.188)
2 Select “Sounds”.
3 Select the desired item to be
set.
2 Select “Setup”.
3 Select “Phone”.
4 Select the desired item to be
set.
Phone settings screen
A Connecting a Bluetooth®
device and editing the Bluetooth® device information
(P.41, 43)
B Sound settings* (P.188)
*
C Notification settings
(P.189)
D Contact/call history
settings*
A Select to set the desired ring-
tone.
B Select “-” or “+” to adjust the
ringtone volume.
C Select “-” or “+” to adjust the
default volume of the other
party’s voice.
7-2. Setup
D Select to set the desired
incoming e-mail tone.
189
3 Select the desired item to be
set.
E Select to set the desired
incoming SMS/MMS tone.
F Select “-” or “+” to adjust the
incoming SMS/MMS tone
volume.
G Select “-” or “+” to adjust the
incoming e-mail tone volume.
H Select “-” or “+” to adjust the
message readout volume.
I Select to reset all setup
items.
● Depending on the type of Blue-
tooth® phone, certain functions
may not be available.
1 Display the phone settings
screen. (P.188)
2 Select “Notifications”.
7
ing call display.
“Full Screen”: When a call is
received, the incoming call screen
is displayed and can be operated
on the screen.
“Drop-down”: A message is displayed at the top of the screen.
B Select to set the SMS/MMS
notification pop-up on/off.
C Select to change the incom-
ing SMS/MMS display.
“Full Screen”: When an SMS/MMS
message is received, the incoming
SMS/MMS display screen is displayed and can be operated on the
screen.
“Drop-down”: When an SMS/MMS
message is received, a message is
displayed at the top of the screen.
D Select to set the e-mail notifi-
cation pop-up on/off.
Phone
Notifications settings
screen
A Select to change the incom-
190
7-2. Setup
E Select to change the incom-
ing e-mail display.
3 Select the desired item to be
set.
“Full Screen”: When an e-mail is
received, the incoming e-mail display screen is displayed and can be
operated on the screen.
“Drop-down”: When an e-mail is
received, a message is displayed at
the top of the screen.
F Select to set display of the
contact/history transfer completion message on/off.
G Select to reset all setup
items.
● Depending on the type of Blue-
tooth® phone, these functions
may not be available.
Contacts/Call history settings screen
A For PBAP compatible Blue-
tooth® phones: Select to
change the contact/history
transfer settings. (P.191)
Contacts can be transferred
from a Bluetooth® phone to this
system. Contacts and favorites
can be added, edited and
deleted. Also, the call history
can be deleted.
1 Display the phone settings
screen. (P.188)
C Select to sort contacts by the
2 Select “Contacts/Call History”.
E Select to delete contacts
B Select to update contacts
from the connected device.
(P.192)
first name or last name field.
D Select to add contacts to the
favorites list. (P.194)
from the favorites list.
(P.195)
F Select to clear the call his-
tory.*
G Select to add new contacts to
the contact list.* (P.193)
H Select to edit contacts in the
7-2. Setup
contact list.* (P.194)
I Select to delete contacts
from the contact list.*
(P.194)
J Select to set the voice tags.
(P.195)
K Select to reset all setup
items.
*:
Bluetooth®
For PBAP compatible
phones, this function is available
when “Automatic Transfer” is set
to off. (P.191)
● Depending on the type of Blue-
Setting automatic contact/history transfer
The automatic contact/history
function is available for PBAP
compatible Bluetooth® phones
only.
1 Select “Automatic Transfer”.
2 Select the desired item to be
set.
A Select to set automatic con-
tact/history transfer on/off.
When set to on, the phone’s
contact data and history are
automatically transferred.
B Select to update contacts
from the connected phone.
(P.191)
C Select to set the transferred
contact image display on/off.
Only when the vehicle is not
moving, the contact image
can be displayed.
D Select to reset all setup
items.
■ Updating contacts from
phone
1 Select “Update Now”.
 Contacts are transferred automatically.
2 Check that a confirmation
screen is displayed when the
operation is complete.
 This operation may be unnecessary depending on the type
of Bluetooth® phone.
 If another Bluetooth® device
is connected when transferring contact data, depending
on the phone, the connected
Bluetooth® device may need
to be disconnected.
 Depending on the type of
Bluetooth® phone being connected, it may be necessary
to perform additional steps on
7
Phone
tooth® phone, certain functions
may not be available.
● Contact data is managed independently for every registered
phone. When one phone is connected, another phone’s registered data cannot be read.
191
192
7-2. Setup
the phone.
■ Updating the contacts in a
different way (from the call
history screen)*
1 Display the phone top
screen. (P.172)
2 Select “History” and select a
contact not yet registered in
the contact list.
3 Select “Update Contact”.
4 Select the desired contact.
5 Select a phone type for the
phone number.
*:
For PBAP compatible Bluetooth®
phones, this function is available
when “Automatic Transfer” is set
to off. (P.191)
Transfer contacts from
device
From phone (OPP compatible Bluetooth® phones only)
When the contact is not registered
1 Select “Transfer Contacts
from Device”.

2 Select “From Phone (Bluetooth)”.
3 Transfer the contact data to
the system using a Bluetooth® phone.
 This operation may be unnecessary depending on the type
of Bluetooth® phone.
 To cancel this function, select
“Cancel”.
4 Check that a confirmation
screen is displayed when the
operation is complete.
When the contact is registered
1 Select “Transfer Contacts
from Device”.

2 Select “From Phone (Bluetooth)”.
3 Select “Replace Contacts” or
“Add Contact”.
“Replace Contacts”: Select to transfer the contact from the connected
cellular phone and replace the current one.
“Add Contact”: Select to transfer
the desired contact data from the
connected cellular phone to add to
the current one.
4 Transfer the contact data to
the system using a Bluetooth® phone.
 This operation may be unnecessary depending on the type
of Bluetooth® phone.
 To cancel this function, select
“Cancel”.
5 Check that a confirmation
screen is displayed when the
operation is complete.
From USB device
Backed-up contact data
(“vCard” formatted) can be
transferred from USB device or
7-2. Setup
Bluetooth® phone to this system.
1 Open the lid and connect a
USB device. (P.120)
2 Select “Transfer Contacts
from Device”.
3 Select “From USB”.
4 Select “USB 1” or “USB 2”
when the multiple USB
devices are connected. If a
USB device is connected,
skip this procedure.
5 Select “Replace Contacts” or
“Add Contact”. If the contact
is already registered, skip
this procedure.
6 Select a desired file from
vCard file list.
7 Check that a confirmation
screen is displayed when the
operation is complete.
● Depending on the type of Blue-
tooth® phone used and number of
files, it may take time to display
vCard file lists and download contacts.
● Downloading may not complete
correctly in the following cases:
• If the engine switch <power
switch> is turned off during downloading.
• If the USB device or Bluetooth®
phone is removed before downloading is complete.
Registering a new contact
to the contacts list
New contact data can be registered.
Up to 4 numbers per person can
be registered. For PBAP compatible Bluetooth® phones, this
function is available when “Automatic Transfer” is set to off.
(P.190)
1 Select “New Contact”.
2 Enter the name and select
“OK”.
3 Enter the phone number and
select “OK”.
4 Select the phone type for the
phone number.
5 To add another number to
this contact, select “Yes”.
■ Registering a new contact
in a different way (from the
call history screen)
1 Display the phone top
screen. (P.172)
2 Select “History” and select a
contact not yet registered in
the contact list.
3 Select “Add to Contacts”.
4 Follow the steps in “Registering a new contact to the contacts list” from step 2.
(P.193)
7
Phone
“Replace Contacts”: Select to transfer the contact from the connected
USB device or Bluetooth® phone
and replace the current one.
“Add Contact”: Select to transfer
the desired contact data from the
connected USB device or Bluetooth® phone to add to the current
one.
193
194
7-2. Setup
Editing the contact data
For PBAP compatible Bluetooth® phones, this function is
available when “Automatic
Transfer” is set to off. (P.190)
1 Select “Edit Contact”.
2 Select the desired contact.
3 Select
next to the name
or desired number.
4 Enter the name or the phone
number and select “OK”.
■ Registering the contacts in
the favorites list
1 Select “Add Favorite”.
2 Select the desired contact to
add to the favorites list.
 Dimmed contacts are already
stored as a favorite.
3 Check that a confirmation
screen is displayed when the
operation is complete.
For PBAP compatible Bluetooth® phones, this function is
available when “Automatic
Transfer” is set to off. (P.190)
1 Select “Delete Contacts”.
When 15 contacts have
already been registered to the
favorites list
1 When 15 contacts have
already been registered to
the favorites list, a registered
contact needs to be replaced.
Select “Yes” when the confirmation screen appears to
replace a contact.
2 Select the desired contact
and select “Delete”.
2 Select the contact to be
replaced.
3 Select “Yes” when the confirmation screen appears.
3 Check that a confirmation
screen is displayed when the
operation is complete.
● Multiple data can be selected and
■ Registering contacts in the
Deleting the contact data
deleted at the same time.
● When a Bluetooth® phone is
deleted, the contact data will be
deleted at the same time.
Favorites list setting
Up to 15 contacts (maximum of
4 numbers per contact) can be
registered in the favorites list.

favorites list in a different
way (from the contact
details screen)
1 Display the phone top
screen. (P.172)
2 Select “Contacts” and select
the desired contact.
3 Select “Add Favorite”.
4 Check that a confirmation
screen is displayed when the
operation is complete.
7-2. Setup
■ Deleting the contacts in the
favorites list
1 Select “Remove Favorite”.
195
2 Select the desired item to be
set.
2 Select the desired contacts
and select “Remove”.
3 Select “Yes” when the confirmation screen appears.
4 Check that a confirmation
screen is displayed when the
operation is complete.
■ Deleting contacts in the
favorites list in a different
way (from the contact
details screen)
1 Display the phone top
screen. (P.172)
3 Select “Remove Favorite”.
4 Select “Yes” when the confirmation screen appears.
5 Check that a confirmation
screen is displayed when the
operation is complete.
Setting voice tags
Calls can be made by saying the
voice tag of a registered contact
in the contact list. (P.156)
1 Select “Manage Voice Tags”.
tag. (P.195)
B Select to edit a voice tag.
(P.195)
C Select to delete a voice tag.
(P.196)
■ Registering a voice tag
Up to 50 voice tags can be registered.
1 Select “New”.
2 Select the desired contact to
register a voice tag for.
3 Select “REC” and record a
voice tag.
 When recording a voice tag,
do so in a quiet area.
“Play”: Select to play the voice tag.
4 Select “OK” when voice tag
registration is complete.
■ Editing a voice tag
1 Select “Edit”.
2 Select the desired contact to
edit.
3 Follow the steps in “Registering a voice tag” from step 3.
(P.195)
7
Phone
2 Select “Favorites” or “Contacts” and select the desired
contact to delete.
A Select to register a new voice
196
7-2. Setup
■ Deleting the voice tag
1 Select “Delete”.
2 Select the desired contact
and select “Delete”.
3 Select “Yes” when the confirmation screen appears.
● Multiple data can be selected and
deleted at the same time.
● Voice tags are deleted when the
set language of the system is
changed. (P.56)
Message settings screen
1 Display the phone settings
screen. (P.188)
2 Select “Messaging”.
3 Select the desired item to be
set.
A Select to set automatic mes-
sage transfer on/off.
B Select to set automatic mes-
sage readout on/off.
C Select to set updating mes-
sage read status on phone
on/off.
D Select to set display of mes-
saging account names on the
message screen on/off.
When set to on, messaging
account names used on the
cellular phone will be displayed.
E Select to set adding the vehi-
cle signature to outgoing
messages on/off.
The vehicle signature can be
edited. (P.196)
F Select to reset all setup
items.
● Depending on the phone, these
functions may not be available.
Vehicle signature settings
1 Select “Vehicle Signature”.
2 Select the desired item to be
set.
A Select to set adding the vehi-
cle signature to outgoing
messages on/off.
B Select to edit the vehicle sig-
nature. (P.196)
C Select to reset all setup
items.
■ Editing vehicle signature
1 Select “Edit Vehicle Signature”.
7-2. Setup
197
2 Enter desired signature with
using keyboard.
3 Select “OK”.
4 Select “OK” on the confirmation screen, or select “Edit
Again” when it needs to
amend.
7
Phone
198
7-3. What to do if...
Troubleshooting
7-3.What to do if...
If there is a problem with the
hands-free system or a
Bluetooth® device, first
check the table below.
Troubleshooting
■ When using the hands-free
system with a Bluetooth®
device
The hands-free system or Bluetooth® device does not work.
Likely cause
Solution
For a list of specific devices
which operation
has been confirmed on this
system, check
with your Toyota
The connected dealer or the foldevice may not lowing website:
be a compatible http://www.
toyota.com/
Bluetooth® cellu- Entune/ in the
lar phone.
United States,
http://www.
toyota.ca/entune
in Canada, and
http://www.
toyotapr.com/
entune in Puerto
Rico
The Bluetooth®
version of the
connected cellular phone may
be older than the
specified version.
Use a cellular
phone with Bluetooth® version
2.0 or higher
(recommended:
Ver. 4.1 +EDR or
higher). (P.39)
■ When registering/connect-
ing a cellular phone
A cellular phone cannot be registered.
7-3. What to do if...
Likely cause
Solution
An incorrect
passcode was
entered on the
cellular phone.
Enter the correct
passcode on the
cellular phone.
The registration
operation has
not been completed on the cellular phone side.
Complete the
registration operation on the cellular phone
(approve registration on the
phone).
A Bluetooth® connection cannot be made.
Likely cause
Set automatic
Bluetooth® conAutomatic Blue- nection on this
tooth® connec- system to on
tion on this
when the engine
system is set to switch <power
off.
switch> is in
ACC or ON.
(P.45)
Set preferred
device settings
function on this
system to off.
Preferred device (P.46)
settings function
on this system is Set the desired
cellular phone to
set to on.
the highest automatic connection priority.
(P.46)
■ When making/receiving a
call
A call cannot be made/received.
Solution
Another Bluetooth® device is
already connected.
Manually connect the cellular
phone you wish
to use to this
system. (P.41)
Bluetooth® function is not
enabled on the
cellular phone.
Enable the Bluetooth® function
on the cellular
phone.
Solution
Likely cause
Solution
Move to where
Your vehicle is in
a
area.
no longer
appears on the
display.
■ When using the phonebook
Phonebook data cannot be
transferred manually/automatically.
7
Phone
Delete the existing registration
Old registration information from
information
both this system
remains on
and the cellular
either this sysphone, then regtem or the cellu- ister the cellular
lar phone.
phone you wish
to connect to this
system. (P.43)
Likely cause
199
200
7-3. What to do if...
Likely cause
Solution
For a list of specific devices
which operation
has been confirmed on this
system, check
with your Toyota
The profile verdealer or the folsion of the conlowing website:
nected cellular
http://www.
phone may not
toyota.com/
be compatible
Entune/ in the
with transferring
United States,
phonebook data.
http://www.
toyota.ca/entune
in Canada, and
http://www.
toyotapr.com/
entune in Puerto
Rico
Automatic contact transfer
function on this
system is set to
off.
Set automatic
contact transfer
function on this
system to on.
(P.191)
Passcode has
not been entered
on the cellular
phone.
Enter the passcode on the cellular phone if
requested
(default passcode: 1234).
Complete transfer operation on
Transfer operathe cellular
tion on the celluphone (approve
lar phone has
transfer operanot completed.
tion on the
phone).
Phonebook data cannot be
edited.
Likely cause
Automatic contact transfer
function on this
system is set to
on.
Solution
Set automatic
contact transfer
function on this
system to off.
(P.191)
■ When using the Bluetooth®
message function
Messages cannot be viewed.
Likely cause
Solution
Enable message transfer on
Message transthe cellular
fer is not enabled
phone (approve
on the cellular
message transphone.
fer on the
phone).
Automatic transfer function on
this system is set
to off.
Set automatic
transfer function
on this system to
on. (P.191)
New message notifications are
not displayed.
Likely cause
Solution
Notification of
SMS/MMS/Email reception on
this system is set
to off.
Set notification
of SMS/MMS/Email reception on
this system to
on. (P.189)
Automatic message transfer
function is not
enabled on the
cellular phone.
Enable automatic transfer
function on the
cellular phone.
■ In other situations
The Bluetooth® connection sta-
7-3. What to do if...
tus is displayed at the top of the
screen each time the engine
switch <power switch> is in ACC
or ON.
Likely cause
Solution
Connection confirmation display
on this system is
set to on.
To turn off the
display, set connection confirmation display
on this system to
off. (P.46)
Even though all conceivable
measures have been taken, the
symptom status does not
change.
Likely cause
Solution
Radio interference has
occurred.
Turn off Wi-Fi®
devices or other
devices that may
emit radio
waves.
Solution
Turn the cellular
phone off,
remove and reinstall the battery
pack, and then
restart the cellular phone.
Enable the cellular phone’s Bluetooth®
connection.
Disable the
Wi-Fi® connecThe cellular
tion of the celluphone is the
most likely cause lar phone.
of the symptom. Stop the cellular
phone’s security
software and
close all applications.
Before using an
application
installed on the
cellular phone,
carefully check
its source and
how its operation might affect
this system.
● For details, refer to the owner’s
manual that came with the cellular
phone.
7
Phone
The cellular
Bring the celluphone is not
lar phone closer
close enough to
to this system.
this system.
Likely cause
201
202
7-3. What to do if...
203
Toyota Entune
8
8-1. Toyota Entune overview
Functional overview .... 204
Type A: Function achieved
by using a smartphone or
DCM .......................... 206
Type B: Function achieved
by using DCM and the system ............................ 209
Type C: Function achieved
by using DCM............ 211
Type D: Function achieved
by using DCM and a
smartphone ............... 213
8-2. Toyota Entune operation
Toyota Entune App Suite
Connect..................... 215
8-3. Setup
Toyota Entune App Suite
Connect settings ....... 221
8
Toyota Entune
Toyota Entune Destinations
.................................. 219
204
8-1. Toyota Entune overview
Functional overview
8-1.Toyota Entune overview
Function
Safety Connect
Toyota Entune is a service
that includes Toyota Entune
App Suite Connect, Destination Assist Connect, Toyota
Entune Service Connect,
Dynamic Navigation, Wi-Fi®
Hotspot, Safety Connect,
and Toyota Entune Remote
Connect.
Functional overview
 The functions included in Toyota Entune are classified into
the following four types.
• Type A: Function achieved by
using a smartphone or an embedded cellular device in the vehicle
(DCM: Data Communication
Module) and the system
• Type B: Function achieved by
using DCM and the system
• Type C: Function achieved by
using DCM
• Type D: Function achieved by
using DCM and a smartphone
Function
Toyota Entune App
Suite Connect
Type
Type A
Destination Assist Connect, Dynamic Naviga- Type B
tion, Wi-Fi® Hotspot
Type
Type C
Toyota Entune Remote
Connect, Toyota
Type D
Entune Service Connect
● Availability of functions of the Toy-
ota Entune is dependent on network reception level.
● Each function is available in the
following areas:
• Toyota Entune App Suite Connect
is available in the contiguous
United States, Washington D.C.,
Alaska, Hawaii, Puerto Rico and
Canada.
• Toyota Entune App Suite Connect
is not available in the United
States Virgin Islands.
• Destination Assist Connect is
available in the contiguous United
States, Washington D.C., Puerto
Rico, Hawaii, Canada, and limited
areas of Alaska for vehicles that
contain the appropriate map data.
• Destination Assist Connect is not
available in the United States Virgin Islands.
• Dynamic Navigation is available in
the contiguous United States,
Washington D.C. and Alaska.
• Dynamic Navigation is not available in Puerto Rico, Canada, and
in the United States Virgin Islands.
• Wi-Fi® Hotspot is available in the
contiguous United States, Washington D.C., Alaska and Hawaii.
• Wi-Fi® Hotspot is not available in
Puerto Rico, Canada, and in the
United States Virgin Islands.
• Safety Connect features include:
Automatic Collision Notification,
Emergency Assistance, S.O.S,
Stolen Vehicle Location (available
in the contiguous United States,
Washington D.C., Hawaii, Alaska,
Puerto Rico and Canada) and
Enhanced Roadside Assistance
(available in the contiguous
8-1. Toyota Entune overview
•
•
•
•
•
205
United States, Washington D.C.,
Alaska, Puerto Rico and Canada).
Safety Connect is not available in
the United States Virgin Islands.
Toyota Entune Remote Connect is
available in the contiguous United
States, Washington D.C. and
Alaska.
Toyota Entune Remote Connect is
not available in Puerto Rico, Canada, and in the United States Virgin Islands.
Toyota Entune Service Connect is
available in the contiguous United
States, Washington D.C., and
Alaska.
Toyota Entune Service Connect is
not available in Puerto Rico, Canada, and the United States Virgin
Islands.
8
Toyota Entune
206
8-1. Toyota Entune overview
Type A: Function achieved by using a smartphone
or DCM
Of the functions included with Toyota Entune, the Toyota
Entune App Suite Connect relies on the use of a smartphone
or DCM.
 Using a smartphone
• Toyota Entune App Suite Connect enables applicable apps
installed on a smartphone to be displayed on and operated from
the screen via Bluetooth®.
 Via DCM
• Toyota Entune App Suite Connect enables applicable apps
installed on the system to be displayed on and operated from the
screen.
A few settings must be performed before Toyota Entune App
Suite Connect can be used. (P.208)
By using a smartphone or DCM
A Content provider
Provides contents to the application server.
8-1. Toyota Entune overview
207
B Application server
Provides applications to the system or a smartphone.
C Smartphone*
Using the Toyota Entune App Suite Connect, communication is
relayed between the system, application server and contents provider. The smartphone cannot be operated while communicating.
D Applications
Display usable content from the content providers on the screen
using the data connection of the connected smartphone or DCM.
E System
Content received, via a smartphone or DCM, from content provider servers is displayed on the screen. The system is equipped
with an application player to run applications.
F Via DCM
*
: For known compatible phones, refer to
http://www.toyota.com/Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, and
http://www.toyotapr.com/entune
in Puerto Rico.
The required operations to activate applications and connect a
smartphone to the system, and
the registration steps for the
Toyota Entune App Suite Connect are explained in this section.
*
: For details, refer to
http://www.toyota.com/Entune/
or call 1-800-331-4331 in the
United States,
http://www.toyota.ca/entune
or call 1-888-869-6828 in Canada, and
http://www.toyotapr.com/entune
or call 1-877-855-8377 in Puerto
Rico.
■ Subscription
■ Availability of function
 Toyota Entune App Suite
Connect does not require an
activation fee or monthly
recurring fees.
 Toyota Entune App Suite
Connect is available in the
contiguous United States,
Washington D.C., Alaska,
Hawaii, Puerto Rico and Canada.
 Services requiring a separate
contract can also be used.*
Toyota Entune
Before using the function
8
208
8-1. Toyota Entune overview
 Toyota Entune App Suite
Connect is not available in the
United States Virgin Islands.
● Data usage fees may apply while
using Toyota Entune App Suite
Connect function. Confirm data
usage fees before using this function.
● For details regarding operation of
the Toyota Entune App Suite Connect and the applications, refer to
http://www.toyota.com/Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, and
http://www.toyotapr.com/entune
in Puerto Rico.
● These functions are not made
available in some countries or
areas. Availability of functions of
the Toyota Entune App Suite Connect service is dependent on network reception level.
■ Initializing personal data
The personal data used in applications can be reset. (P.59)
 The following personal data
can be deleted and returned
to their default settings:
• Downloaded contents
• Radio stations that were listened
to
● Once initialized, the data and set-
tings will be erased. Pay much
attention when initializing the data.
Preparation before using
Toyota Entune App Suite
Connect
■ Settings required to use
Toyota Entune App Suite
Connect
Perform the settings in the following order.
1 Download the Toyota Entune
App Suite Connect application to your smartphone or
the system.
2 Register the smartphone with
the system.
In order to use Toyota Entune App
Suite Connect, the following must
first be performed:
 Register a Bluetooth® phone
with the hands-free system.
(P.36)
● Applications can only be used
when the Toyota Entune App
Suite Connect application has
been downloaded to your smartphone or the system, and the
application is running.
● Toyota Entune App Suite Connect
operational procedures can also
be confirmed by visiting
http://www.toyota.com/Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, and
http://www.toyotapr.com/entune
in Puerto Rico.
● If a Toyota Entune App Suite Connect application is used while iPod
audio/video is being played back,
system operation may become
unstable.
8-1. Toyota Entune overview
209
Type B: Function achieved by using DCM and the
system*
*
: Vehicles equipped with DCM
The functionality of Destination Assist Connect, Dynamic
Navigation, and Wi-Fi® Hotspot is made possible through the
shared work of the DCM and the system.
Destination Assist Connect and Dynamic Navigation are subscription-based telematics services that use Global Positioning System (GPS) data and embedded cellular technology to
provide safety and security as well as convenience features.
These services are available by subscription on select,
telematics hardware-equipped vehicles and supported by the
Toyota Entune center, which operates 24 hours a day, 7 days
a week.
For details about:
 Dynamic Navigation:P.81, 90, 116
 Wi-Fi® Hotspot:P.47
8
Before using the function
 After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services. A variety
of subscription terms are available. Contact your Toyota dealer, or
call 1-800-331-4331 in the United States, 1-888-869-6828 in Canada, and 1-877-855-8377 in Puerto Rico, for further subscription
details. (P.207)
■ Availability of functions
 Destination Assist Connect is available in the contiguous United
States, Washington D.C., Puerto Rico, Hawaii, Canada, and limited areas of Alaska for vehicles that contain the appropriate map
data.
 Destination Assist Connect is not available in the United States
Virgin Islands.
 Dynamic Navigation is available in the contiguous United States,
Toyota Entune
■ Subscription
210
8-1. Toyota Entune overview
Washington D.C. and Alaska.
 Dynamic Navigation is not available in Puerto Rico, Canada, and
in the United States Virgin Islands.
 Wi-Fi® Hotspot is available in the contiguous United States, Washington D.C., Alaska and Hawaii.
 Wi-Fi® Hotspot is not available in Puerto Rico, Canada, and in the
United States Virgin Islands.
8-1. Toyota Entune overview
Type C: Function
achieved by using
DCM*
*
: Vehicles equipped with DCM
The functionality of Safety
Connect is made possible
by the use of a DCM.
For details, refer to
“OWNER’S MANUAL”.
● Free/Open Source Software Infor-
erature. Over 120 scientists,
engineers, and physicians from
universities, government health
agencies, and industry reviewed
the available body of research to
develop the ANSI Standard
(C95.1).
● The design of Toyota Entune system complies with the FCC guidelines in addition to those
standards.
● Contact with the Toyota Entune
center is dependent upon the
telematics device being in operative condition, cellular connection
availability, navigation map data,
and GPS satellite signal reception, which can limit the ability to
reach the Toyota Entune center or
receive support. Enrollment and
Telematics Subscription Service
Agreement required. A variety of
subscription terms are available;
charges vary by subscription term
selected.
● The Toyota Entune center offers
support in multiple languages.
● Select Safety Connect-subscribed vehicles are capable of
communicating vehicle information. Please see the terms and
conditions for additional details.
Owners who do not wish to have
their vehicle transmit this information can opt out at the time of
enrollment or by calling 1-800331-4331 in the United States, 1888-869-6828 in Canada, and 1877-855-8377 in Puerto Rico, and
following the prompts for Safety
Connect.
● For further details about the service, contact your Toyota dealer.
● Toyota Entune functions are not
subject to section 255 of the Telecommunications Act and the system is not TTY compatible.
8
Toyota Entune
mation
This product contains Free/Open
Source Software (FOSS).
The license information and/or the
source code of such FOSS can be
found at the following URL.
https://www.toyota.com/
opensource/dcm
● Exposure to radio frequency signals:
The connected service system
installed in your vehicle includes a
low power radio transmitter and
receiver. The system receives and
also sends out radio frequency
(RF) signals.
● In August 1996, the Federal Communications Commission (FCC)
adopted RF exposure guidelines
with safety levels for mobile wireless phones. Those guidelines are
consistent with the safety standards previously set by both U.S.
and international standards bodies.
• ANSI (American National Standards Institute) C95.1 [1992]
• NCRP (National Council on Radiation Protection and Measurement) Report 86 [1986]
• ICNIRP (International Commission on Non-Ionizing Radiation
Protection) [1996]
● These standards are based on
comprehensive and periodic evaluations of the relevant scientific lit-
211
212
8-1. Toyota Entune overview
● Certification
 For
vehicles sold in the U.S.A., Canada and Puerto Rico
8-1. Toyota Entune overview
Type D: Function
achieved by using
DCM and a smartphone
The functionality of Toyota
Entune Remote Connect
and Toyota Entune Service
Connect are made possible
by the use of a DCM and a
smartphone.
For details about these services, refer to
http://www.toyota.com/
Entune/.
Toyota Entune Remote
Connect
■ Subscription
 After you sign the Telematics
Subscription Service Agreement (see the Safety Connect
section in “OWNER’S MANUAL”), download the Toyota
Entune Remote Connect app
from your smartphone’s app
store, and register within the
app (or enroll and complete
registration at the dealer), you
can begin using these services.
 A variety of subscription terms
are available. Contact your
Toyota dealer, or call 1-800331-4331 for further subscription details.
■ Availability of function
 Toyota Entune Remote Connect is available in the contiguous United States,
Washington D.C. and Alaska.
 Toyota Entune Remote Connect is not available in Puerto
Rico, Canada, and in the
United States Virgin Islands.
● Availability of functions of the Toy-
ota Entune Remote Connect is
dependent on network reception
level.
WARNING
● Operating Toyota Entune
Remote Connect incorrectly
may lead to unforeseen accidents or malfunctions. Check
the vehicle condition and
assume full responsibility before
using.
● Toyota Entune Remote Connect
should only be used by authorized
users.
● Laws in some communities may
require that the vehicle be within
view of the user when operating
Toyota Entune Remote Connect.
In some states, use of Toyota
Entune Remote Connect may violate state or local laws. Before
using Toyota Entune Remote Connect, check your state and local
laws.
● Any malfunction of the vehicle
should be repaired by your Toyota
dealer.
8
Toyota Entune
Toyota Entune Remote Connect is a smartphone application
that lets you view and remotely
control certain aspects of your
vehicle.
213
214
8-1. Toyota Entune overview
● Toyota Entune Remote Connect is
designed to work at temperatures
above approximately -22 °F (-30
°C). This specification is related to
the Toyota Entune Remote Connect operation, but is dependent
on the vehicle’s operating temperature range which may be different.
● Content is subject to change without notice.
● Additional information can be
found at http://www.toyota.com/
Entune/.
Toyota Entune Service
Connect
Toyota Entune Service Connect
uses DCM to collect and transmit vehicle data that allows Toyota to provide:
 Vehicle Health Report (VHR)
(Safety Recalls, Service Campaigns, Current Vehicle
Alerts, Required Maintenance, and Vehicle Condition
Status)
 Maintenance Notifications
 Vehicle Alert Notifications
■ Availability of function
 Toyota Entune Service Connect is available in the contiguous United States,
Washington D.C., and Alaska.
 Toyota Entune Service Connect is not available in Puerto
Rico, Canada, and the United
States Virgin Islands.
● Availability of functions of the Toy-
ota Entune Service Connect is
dependent on network reception
level.
8-2. Toyota Entune operation
Toyota Entune App
Suite Connect
8-2.Toyota Entune operation
App Suite is a function that
enables certain apps
installed on a smartphone
or the system to be displayed on and operated
from the system screen.
Before the Toyota Entune
App Suite Connect can be
used, some setup needs to
be performed. (P.208)
Using Toyota Entune App
Suite Connect
From the “MENU” button
1 Press the “MENU” button.

2 Select “Apps”.
3 Follow the steps in “From the
“APPS” button” from step 3.
(P.215)
From the “APPS” button
1 Press the “APPS” button.

2 Select “Apps”.
 If a specific application screen
is displayed, select “Apps”
again.
3 Select the desired application
screen button.
: Select to activate an application.
“Update”: Select to update the
applications. (P.215)
“App Catalog”: Select to change the
order of the applications. (P.216)
: Displays the number of new
notifications for the application
Updating an application
When the App Suite is activated,
an application may need to be
updated. To update an application, it is necessary to download
update data and install it.
8
Toyota Entune
For details about the functions and services provided
by each application, refer to
http://www.toyota.com/
Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, and
http://www.toyotapr.com/
entune
in Puerto Rico.
215
216
8-2. Toyota Entune operation
■ Downloading update
If an update is available,
“Update” can be selected.
1 Select “Update” on the application screen. (P.215)
2 Check that downloading
starts.
“Download in Background”: Select
to operate other functions while
downloading.
“Cancel”: Select to cancel updating.
3 Check that downloading is
complete.
“Later”: Select to install later. When
this screen button is selected, the
screen will return to the last displayed screen. To install the update
data: (P.216)
“See Detail”: Select to display
detailed information on the update
data.
“Install”: Select to install the update
data. Follow the steps “Installing
the update data” from step 2.
(P.216)
■ Installing the update data
After the downloading is complete, “Update” will be changed
to “Install”.
1 Select “Install” on the application screen. (P.215)
2 Select “Continue”.
4 Select “OK” after the installing is complete.
● The Toyota Entune App Suite
Connect function cannot be operated while installing.
Reordering the applications
Order of the applications can be
changed.
1 Display the application
screen. (P.215)
2 Select “App Catalog”.
3 Select the desired application
to be moved.
4 Select “<<” or “>>” to move
the application, and then
select the done button.
If a message appears on
the screen
When problems occur with starting the application player, a
message will appear on the
screen. Referring to the following items, identify the problem
and take the suggested corrective action.
3 Check that installing is
started.
 “When it is safe and legal to
do so, please ensure your
Entune App Suite application
is running and logged in on
your phone.”
“Install in Background”: Select to
operate other functions while
installing.
The Toyota Entune App Suite Connect application cannot be connected to Bluetooth® SPP.
“Later”: Select to postpone the
installation of the update data and
go back to the previous screen.
Refer to
8-2. Toyota Entune operation
http://www.toyota.com/Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, and
http://www.toyotapr.com/entune
in Puerto Rico, to confirm if the
phone is Bluetooth® SPP compatible or not, and then activate the
Toyota Entune App Suite Connect
application.
 “Installation failed, please try
again”
Installation can be attempted again
by changing to the application
screen and pressing the “Install”
switch.
 “Application download error.
Please try again later.”
Downloading can be attempted
again by checking the communication status, changing to the application screen and pressing the
“Download” switch again.
The Toyota Entune App Suite Connect application cannot be connected to Bluetooth® SPP.
Refer to
http://www.toyota.com/Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, and
http://www.toyotapr.com/entune
in Puerto Rico, to confirm if the
phone is Bluetooth® SPP compatible or not, and then activate the
Toyota Entune App Suite Connect
application.
Please ensure your Toyota Entune
App Suite Connect application is
running and logged in on your
phone while vehicle is not moving.
 “To use the services, Entune
APP Suite Connect application needs to be running on
your phone. For more information, please visit
toyota.com or call 1-800-3314331 in the United States, 1888-869-6828 in Canada, and
1-877-855-8377 in Puerto
Rico.”
The Toyota Entune App Suite Connect application cannot be connected to Bluetooth® SPP.
Refer to
http://www.toyota.com/Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, and
http://www.toyotapr.com/entune
in Puerto Rico, to confirm if the
phone is Bluetooth® SPP compatible or not, and then activate the
Toyota Entune App Suite Connect
application.
 “Communication unsuccessful. Please try again.”
Communication was disconnected.
After a few moments, retry the
operation.
Entering keyword operation
A keyword can be entered to an
application by the software key-
8
Toyota Entune
 “Download error, some
Entune App Suite functions
may not work as expected.
Please reinitiate the download
process.”
217
218
8-2. Toyota Entune operation
board or voice recognition function. For details about the
functions and services provided
by each application, refer to
http://www.toyota.com/Entune/
in the United States,
http://www.toyota.ca/entune
in Canada, and
http://www.toyotapr.com/entune
in Puerto Rico.
 The keyboard layout can be
changed. (P.56)
Entering a keyword using
the software keyboard
1 Display the application
screen. (P.215)
2 Select the desired application
screen button.
3 Select the character entering
space.
4 Enter a search term, and
then select “OK”.
5 Entering characters will be
reflected on the character
entering space.
 For details on operating the
keyboard: P.30
Entering a keyword using
the voice recognition function
1 Display the application
screen. (P.215)
2 Select the desired application
screen button.
3 Press the talk switch.
(P.156)
4 Say the desired keyword.
 Completion of the keyword
will be detected automatically.
5 Search results will be displayed on the screen.
8-2. Toyota Entune operation
Toyota Entune Destinations
*:
2 Select
.
3 Follow the steps in “From the
menu screen” from step 3.
(P.219)
Destination Assist Connect*
■ From the menu screen
Entune Premium Audio only
1 Press the “MENU” button.
Destination Assist Connect provides you with live assistance
for finding destinations via the
Toyota Entune center. You can
request either a specific business, address, or ask for help
locating your desired destination
by category, such as restaurants, gas stations, shopping
centers or other Points of Interest (POI).
After you tell the agent your
choice of destination, its coordinates are sent wirelessly to your
vehicle’s navigation system.
used while Destination Assist
Connect is being used.
Make a call with Destination Assist Connect
■ From the map screen
1 Press the “MAP” button.
2 Select “Destination”.
3 Select “Dest Assist”.
4 When an agent comes on the
line, tell the agent the
address, business name, or
the type of POI or service.
 To adjust the call volume,
select “-” or “+”, or use the volume switch on the steering
wheel during the call.
 To hang up the phone, select
“End” or press the
switch
on the steering wheel.
5 After the agent helps you
determine your location of
choice, select the screen button of the desired action.
“Save”: Select to register as a
memory point.
“Go”: Select to set as a destination.
: Select to call the registered
number.
8
Toyota Entune
● The hands-free system cannot be
219
220
8-3. Setup
Toyota Entune App
Suite Connect settings
8-3.Setup
The settings of Toyota
Entune App Suite Connect
can be changed.
Displaying the Toyota
Entune App Suite Connect settings screen
1 Press the “MENU” button.
data usage. (P.221)
B Select to detect if an iPhone
app is automatically turned
on/off.
C Select to turn on/off the
enhanced USB connection
mode
• When an iPhone is connected
while this setting is set to “On”,
communication with devices connected to other USB ports may
not be possible. Also, depending
on the device, charging may not
be possible.
D Select to configure the Apps
2 Select “Setup”.
3 Select “Entune App Suite”.
4 Select the desired items to
be set.
Toyota Entune App Suite
Connect settings screen
menu layout (e.g. app order,
which applications are activated, etc.). This updates a
setting file stored on the Toyota Entune center, this settings file can also be updated
from the navigation system,
smartphone app and by web
portal.
E Select to install the Apps via
a USB memory device. For
details, contact your Toyota
dealer.
F Select to reset all setup items
to default setting.
Data usage notification
pop-up settings
A Select to set the pop up
reminder for smartphone
The data usage notification popup, which indicates that the system will use an internet connection, can be enabled/disabled.
8-3. Setup
221
1 Display the Toyota Entune
App Suite Connect settings
screen. (P.221)
2 Select “Data Usage Message”.
3 Change the setting as
desired.
8
Toyota Entune
222
8-3. Setup
223
Index
Alphabetical Index ...... 224
224
Alphabetical Index
Alphabetical Index
A
AM/FM/SiriusXM (SXM) radio 123
Available HD Radio™ technology .....................................127
Caching a radio program......124
Displaying the radio ID .........129
How to Subscribe to SiriusXM
Satellite Radio ....................128
Overview ..............................123
Presetting a station ..............124
Radio broadcast data system126
Radio options .......................125
Refer to the table below to identify the problem and take the
suggested corrective action
...........................................129
Selecting a station from the list
...........................................125
Smart favorites .....................129
Troubleshooting guide..........127
Using HD Radio™ technology
...........................................126
Apple CarPlay ...........................52
Establishing an Apple CarPlay
connection............................52
Troubleshooting......................54
“Apple CarPlay” button (“Menu”
screen) ..............................14, 52
“Apps” button (“Menu” screen)
.........................................14, 215
“APPS” button..................12, 215
Audio/visual remote controls 142
“Audio” button (“Menu” screen)
......................................... 14, 118
“Audio” button (“Setup” screen)
.........................................18, 144
“AUDIO” button ........ 12, 118, 119
Audio settings ........................144
Audio settings screen...........144
Displaying the audio settings
screen ................................144
AUX ..........................................140
Overview ..............................140
B
Basic function...........................12
Basic information before operation ...........................................26
Basic operation.................68, 118
Bluetooth® audio ....................137
Overview ..............................137
Registering/Connecting a Bluetooth® device ......................139
Bluetooth® phone message function .........................................184
Calling the message sender .187
Checking received messages
...........................................185
Displaying the message screen
...........................................184
Receiving a message ...........184
Replying to a message (dictation reply)............................186
Replying to a message (quick
reply) ..................................186
“Bluetooth” button (“Setup”
screen)...............................18, 40
Buttons overview......................12
Operations of each part ..........12
C
Clock settings .....................14, 57
Command list..........................160
Command list overview ........160
Connectivity settings ...............36
D
“Data Services” button (“Setup”
screen).............................18, 170
Data services settings............170
Setting download methods ...170
Alphabetical Index
“Destination” button (“Menu”
screen) ..............................14, 80
Destination search ...................80
Destination search operation..80
Destination screen .................80
One-touch setting home/favorite
as a destination ....................86
Searching by address ............83
Searching by contact..............82
Searching by Destination Assist
Connect................................82
Searching by emergency .......82
Searching by favorites list ......81
Searching by keyword............81
Searching by point of interest.83
Searching by recent destinations
.............................................82
Selecting search area ............80
Setting home as destination...81
Detailed navigation settings..103
Detailed navigation settings
screen ................................104
Displaying the detailed navigation settings screen ............103
“Display” button (“Menu”
screen) ..............................14, 33
E
“ECO” button (“Information”
screen) ....................................20
Editing route .............................95
Displaying the edit route screen
.............................................95
Entering letters and numbers/list
screen operation ....................30
Entering letters and numbers .30
List screen..............................31
“Entune App Suite” button
(“Setup” screen).............18, 221
225
F
Functional overview ...............204
G
“General” button (“Setup”
screen)...............................18, 56
General settings .......................56
Displaying the general settings
screen...................................56
General settings screen .........56
GPS (Global Positioning System)
...............................................113
Limitations of the navigation system .....................................113
Guiding the route......................22
Deleting destinations ..............22
Setting the destination ............22
H
“HOME” button ...................12, 29
Home screen .............................29
Home screen operation ..........29
I
“Info” button (“Menu” screen)14,
20
Information display ...............168
“Information” screen................20
Initial screen..............................26
Caution screen .......................26
Maintenance information ........26
Restarting the system.............26
Internet radio...........................131
Listening to internet radio .....131
iPod/iPhone.............................134
Overview ..............................134
L
Linking multi-information display
226
Alphabetical Index
and the system .......................35
M
“MAP” button......................12, 68
Map database version and covered area ............................... 115
Map information ................... 115
Temporary updates of the map
(Vehicles equipped with DCM)
........................................... 116
Map screen information...........72
Displaying information about the
icon where the cursor is set .76
Displaying the map options
screen ..................................72
Standard map icons ...............77
Map screen operation ..............70
Adjusting location in small increments ...................................72
Current position display..........70
Map scale...............................70
Map scroll operation...............71
Orientation of the map............71
Media operation......................132
“MENU” button ...................12, 14
“Menu” screen..........................14
“Menu” screen operation ........14
Mobile Assistant.....................165
Connectable devices and available functions .....................165
Mobile Assistant operation ...165
Mobile Assistant operation ..165
N
Natural language understanding
...............................................159
Navigation .................................68
Map screen overview .............68
“Navigation” button (“Setup”
screen) ..............................18, 98
Navigation operation................21
Navigation settings ..................98
Displaying navigation settings
screen...................................98
Navigation settings screen .....98
Setting up areas to avoid......101
Setting up favorites list ...........99
Setting up home .....................98
O
Operating information............146
Error messages ....................153
File information .....................148
High-resolution sound source
...........................................148
iPod ......................................147
Radio ....................................146
Terms....................................152
Operating the map screen .......21
Displaying the current position of
the vehicle on the map screen
.............................................21
Moving the map screen ..........21
Zooming in/out the map..........21
Other settings ...........................56
P
“Phone” button (“Menu” screen)
.........................................14, 172
“Phone” button (“Setup” screen)
.........................................18, 188
“PHONE” button ...............12, 172
Phone operation (Hands-free
system for cellular phones) 172
Phone settings........................188
Contacts/Call history settings
screen.................................190
Displaying the phone settings
screen.................................188
Message settings screen......196
Notifications settings screen.189
Phone settings screen ..........188
Alphabetical Index
Sounds settings screen........188
Placing a call using the Bluetooth® hands-free system ...177
By call history .......................177
By contacts list .....................178
By favorites list .....................178
By home screen ...................180
By keypad ............................179
Calling methods on the Bluetooth® phone ......................177
“POWER VOLUME” knob .12, 26,
119
“Projection” button (“Menu”
screen) ....................................14
Q
Quick reference .............. 118, 172
Functional overview ............. 118
Phone screen operation .......172
R
Radio operation ......................123
Receiving a call using the Bluetooth® hands-free system ...180
Incoming calls ......................180
Receiving weather information
...............................................168
Displaying weather screen ...168
Weather guidance service....169
Registering/Connecting a Bluetooth® device ..........................36
Profiles ...................................39
Registering a Bluetooth® audio
player for the first time..........38
Registering a Bluetooth® phone
for the first time ....................36
Registering home .....................23
Setting home as the destination
.............................................24
Route guidance ........................91
227
Route guidance screen ............91
During freeway driving............92
Screen for route guidance ......91
Turn list screen .......................94
Turn-by-turn arrow screen ......94
When approaching intersection
.............................................93
S
Screen adjustment ...................33
Displaying the screen adjustment screen..........................33
“SEEK TRACK” button ............12
AM/FM/SiriusXM (SXM) radio
...........................................123
Bluetooth® audio ..................138
iPod/iPhone ..........................135
USB memory ........................133
Setting Bluetooth® details .......40
“Detailed Settings” screen ......45
Bluetooth® setup screen.........40
Connecting a Bluetooth® device
.............................................41
Deleting a Bluetooth® device..43
Displaying the Bluetooth® setup
screen...................................40
Editing the Bluetooth® device
information............................43
Registering a Bluetooth® device
.............................................42
Setup..................98, 144, 188, 221
“Setup” button (“Menu” screen)
...........................................14, 18
“Setup” screen .........................18
Some basics....................119, 173
About the contacts in the contact
list .......................................176
Audio screen adjustment ......122
Registering/Connecting a Bluetooth® phone ......................174
228
Alphabetical Index
Reordering the audio source 119
Selecting an audio source.... 119
Sound settings .....................120
Turning the system on and off
........................................... 119
USB/AUX port ......................120
Using the phone switch/microphone .................................175
Voice command system122, 176
When selling or disposing of the
vehicle ................................176
Starting route guidance ...........87
A route from the Toyota Entune
center (Vehicles equipped with
DCM)....................................90
Confirm destination screen ....87
Route overview screen...........88
Status icon ................................16
Status icon explanation ..........16
Steering switch
“MODE” switch .....................142
Phone switch........................175
Talk switch....................156, 176
Volume control switch ..142, 175
switch.......................142
Steering switches...................142
Steering switch operation.....142
T
Talking on the Bluetooth® handsfree system ...........................181
Call screen operation ...........181
Incoming call waiting ............183
Sending tones ......................182
Switching calls while a call is in
progress .............................183
Transmit volume setting .......182
Tips for operating the audio/
visual system .......................146
Tips for the navigation system
............................................... 113
Touch screen ............................27
Touch screen gestures ...........27
Touch screen operation ..........28
Toyota Entune App Suite Connect ........................................215
Entering keyword operation..217
Using Toyota Entune App Suite
Connect ..............................215
Toyota Entune App Suite Connect settings .........................221
Displaying the Toyota Entune
App Suite Connect settings
screen.................................221
Toyota Entune App Suite Connect settings screen ...........221
Toyota Entune Destinations ..219
Destination Assist Connect...219
Toyota Entune operation ......215
Toyota Entune overview ........204
“Traffic” button (“Setup” screen)
.........................................18, 107
“Traffic incidents” button (“Information” screen) ................20, 77
Traffic information ....................77
Displaying the traffic incidents
screen...................................77
Displaying traffic information on
the map ................................79
Traffic settings ........................107
Displaying the traffic settings
screen.................................107
Screen for traffic settings......107
Troubleshooting .....................198
“TUNE SCROLL” knob.............12
AM/FM/SiriusXM (SXM) radio
...........................................123
Bluetooth® audio ..................138
iPod/iPhone ..........................135
USB memory ........................133
Type A: Function achieved by
using a smartphone or DCM206
Before using the function......207
Alphabetical Index
By using a smartphone or DCM
...........................................206
Preparation before using Toyota
Entune App Suite Connect 208
Type B: Function achieved by
using DCM and the system .209
Before using the function .....209
Type C: Function achieved by
using DCM ............................ 211
Type D: Function achieved by
using DCM and a smartphone
...............................................213
Toyota Entune Remote Connect
...........................................213
Toyota Entune Service Connect
...........................................214
Typical voice guidance prompts
.................................................95
U
USB memory...........................132
Overview ..............................132
Use of information accumulated
by navigation system (Vehicles
equipped with DCM)............. 112
Displaying the useful navigation
information settings screen 112
229
...........................................18, 60
Voice command system.........156
Using the voice command system .....................................156
Voice command system operation......................................157
Voice command system operation ........................................156
Voice settings ...........................60
Displaying the voice settings
screen...................................60
Voice settings screen .............60
W
“Weather” button (“Information”
screen).............................20, 168
What to do if... ........................198
Wi-Fi® Hotspot ..........................47
Changing the Wi-Fi® settings .48
Connecting a device to the invehicle access point .............47
Wi-Fi® function operating hints
.............................................50
“Wi-Fi” button (“Setup” screen)
...........................................18, 48
V
“Vehicle Alert History” button
(“Information” screen) ...........20
“Vehicle” button (“Setup”
screen) ..............................18, 61
Vehicle settings ........................61
Displaying the vehicle settings
screen ..................................61
Maintenance...........................62
Setting dealer information ......64
Setting the valet mode ...........63
Vehicle settings screen ..........61
“Voice” button (“Setup” screen)
For more information about
the following items, see
the “OWNER’S MANUAL”.
· Fuel consumption
· Energy monitor (RAV4
HYBRID)
· Vehicle customization settings
· Rear view monitor system
· Toyota parking assist monitor
· Panoramic view monitor
230
Map database information and updates
231
232
233
234
235
236
237
Certain business data provided by Infogroup © 2018, All Rights
Reserved.
238
Certification

For vehicles sold in the U.S.A., Hawaii, Guam, Saipan, American
Samoa and Puerto Rico
239

For vehicles sold in Canada
240

For vehicles sold in Mexico
241

For U.S. owners
242
243
244
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement