Toyota 2016 Tundra Quick Reference Guide

Toyota 2016 Tundra Quick Reference Guide
TUNDRA
2 0 1 6
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
QUICK REFERENCE GUIDE
Printed in U.S.A. 7/15
15-TCS-08587
00505QRG16TUN
2016
Tundra
NOTES
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental operations
so you can locate and use the vehicle’s main equipment quickly
and easily.
The Quick Reference Guide is not intended as a substitute for the
Owner’s Manual located in your vehicle’s glove box. We strongly
encourage you to review the Owner’s Manual and supplementary
manuals so you will have a better understanding of your vehicle’s
capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales, U.S.A.,
Inc. wish you many years of satisfied driving in your new Tundra.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Tundra
operations. Every Tundra owner should review the Owner’s
Manual that accompanies this vehicle.
Pay special attention to the boxed information highlighted in
color throughout the Owner’s Manual. Each box contains safe
operating instructions to help you avoid injury or equipment
malfunction.
All information in this Quick Reference Guide is current at the
time of printing. Toyota reserves the right to make changes at
any time without notice.
45
INDEX
OVERVIEW
8
7
7
4-5
4
2-3
6
6
FEATURES/OPERATIONS Air Conditioning/Heating
1
2
3
29
31
28
28
29
30-31
31
28
Visit your Toyota dealer for information on customizing this feature.
Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
HomeLink® is a registered trademark of Gentex Corporation.
1
SAFETY AND EMERGENCY FEATURES
Doors-Child safety locks
Floor mat installation
EMERGENCY FEATURES Seat belts
Seat belts-Shoulder belt anchor
Spare tire & tools
Star Safety System
Trailer Sway Control
Tire Pressure Monitoring (warning) System
SAFETY AND
FEATURES/OPERATIONS
20-21
Audio
22-23
Automatic Transmission
9
Bottle holders
26
Blind Spot Monitor (BSM) with Rear Cross Traffic Alert 25
Bluetooth® Device Pairing Section
33-42
Cruise control
25
Cup holders
27
Door locks
11
Four-wheel drive
10
Garage door opener (HomeLink®)3
21
Lights1 & turn signals
16
Mirrors-Power outside rearview
10
Moonroof
14
Multi-Information Display2
24
Parking brake
18
Power outlets-12V DC
17
Rear seats-Folding
14
Rear view monitor system
18
Seat adjustments-Front
13
Seat heaters and ventilators
19
Seats-Head restraints
14
Telephone controls (Bluetooth®)
26
Tilt and telescopic steering wheel
11
TOW/HAUL switch
12
Trailer brake controller
15
VSC OFF switch
24
Window-Rear
19
Windows-Power
18
Windshield wipers & washers
15
OVERVIEW
Engine maintenance
Fuel tank door release and cap
Hood release
Indicator symbols
Instrument cluster
Instrument panel
Keyless entry1
Light control-Instrument panel
OVERVIEW
Instrument panel
Steering wheel controls
Steering wheel audio controls2
Telephone controls2
Cruise control1
Multi-Information Display switch1
Voice command button1,2
Headlight, turn signal and front fog light1 controls
Wiper and washer controls
Automatic Transmission shift lever1
Display Audio system2
Air Conditioning controls
12V DC power outlets
AUX port/USB port1
Emergency flasher switch
Two-wheel/Four-wheel drive selector1
Intuitive parking assist button1
VSC OFF switch
2
OVERVIEW
FEATURES/OPERATIONS
1
2
If equipped
For vehicles with a navigation system, refer to the “Navigation System
Owner’s Manual.”
3
SAFETY AND EMERGENCY FEATURES
TOW/HAUL switch1
Trailer brake controller
Tire Pressure Monitoring (warning) System
Ignition switch
Tilt and telescopic steering wheel control
Tilt and telescopic steering wheel control (power adjustable)
Power rearview mirror controls1
Personal/Interior lights main switch
Headlight leveling dial1
Power back window switch1
BSM (Blind Spot Monitor with Rear Cross Traffic Alert) main switch1
Cargo lamp main switch
OVERVIEW
Instrument cluster
With Multi-Information Display
Tachometer
Engine coolant temperature
Indicators and warning lights
Fuel gauge
Speedometer
Voltmeter
“ODO/TRIP” and instrument panel light control button
Multi-Information Display
Trip information display
Oil pressure gauge
Indicator symbols
For details, refer to “Indicators and warning lights,” Section 2-2, 2016 Owner’s
Manual.
Brake system warning1
Charging system warning1
Malfunction/Check Engine indicator1
Airbag SRS warning1
Low fuel level warning
Master warning1
4
Open door warning
Low Tire Pressure Warning1
OVERVIEW
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Blind Spot Monitor outside rearview mirror indicators3
Theft deterrent/Engine immobilizer system indicator
Front passenger occupant classification or front passenger airbag ON/OFF
indicator
Headlight low/high beam indicator
Turn signal indicator
High/Low speed four-wheel drive indicator3
Slip indicator1
TOW/HAUL mode indicator
AUTO Limited Slip Differential indicator1
Cruise control indicator2/Cruise control SET indicator
FEATURES/OPERATIONS
Vehicle Stability Control OFF indicator1
Anti-lock Brake System warning1
Trailer connection indicator3
Arrow direction indicates fuel tank door position
If indicator does not turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” Section 4-5, 2016 Owner’s Manual.
3 If equipped.
5
SAFETY AND EMERGENCY FEATURES
1
OVERVIEW
Keyless entry (if equipped)
Locking operation
Push
Unlocking operation
Push ONCE: Driver door
TWICE: All doors
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for
safety.
Panic button
Push and hold
Light control-Instrument panel
Brightness
control
+
6
Fuel tank door release and cap
OVERVIEW
Store
Pull
Turn to open
NOTE: Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “ ”
indicator may illuminate.
FEATURES/OPERATIONS
Hood release
Pull
SAFETY AND EMERGENCY FEATURES
Pull up latch and
raise hood
7
OVERVIEW
Engine maintenance
4.6L 8 cylinder (1UR-FE) and
5.7L 8 cylinder (3UR-FE/3UR-FBE) engines
Windshield washer fluid tank
Power steering fluid reservoir
Engine oil level dipstick
Engine coolant reservoir
Engine oil filler cap
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer
to the “Warranty & Maintenance Guide.”
8
FEATURES/OPERATIONS
Automatic Transmission
Floor shift type
OVERVIEW
+
(“S” mode)
Park*
Reverse
Neutral
Drive
- (“S” mode)
“S” mode
Column shift type
+
(“S” mode)
Reverse
Neutral
- (“S” mode)
Drive
“S” mode
FEATURES/OPERATIONS
Park*
* The ignition switch must be set at “ON” and the brake pedal depressed to shift
from Park.
“S” (Sequential) mode
Shift the shift lever to “S” position from “D” position.
Downshifting increases power going uphill, or provides engine braking downhill.
For best fuel economy during normal driving conditions, always drive with the shift
lever in the “D” position.
9
SAFETY AND EMERGENCY FEATURES
Floor shift type:
+: Upshift (push and release)
-: Downshift (pull and release)
Column shift type:
+: Upshift (push and release)
-: Downshift (push and release)
FEATURES/OPERATIONS
Four-wheel drive (if equipped)
Turn
Push and turn
Turn
2WD
High speed (2WD)
Turn to “2WD” from “4H”.
4H
High speed (4WD)
Turn to “4H” from “2WD”.
Shift to “N” position when stopped, then turn to “4H” from “4L.”
4L
Low speed (4WD)
Shift to “N” position when stopped, then turn to “4L” from “4H.”
For best fuel economy and performance under normal driving conditions, keep in
“2WD” position.
Mirrors-Power outside rearview
(if equipped)
Adjust
Type A, B
Select left or right
Fold mirrors in
Adjust
Return mirrors to
original position
Key must be in the “ACC” or “ON” position.
Extend
Type B
Mirrors can be manually slid outward to improve visibility while towing.
10
Tilt and telescopic steering wheel
(if equipped)
Tilt steering wheel
Tilt and telescopic steering wheel
Angle
Length
OVERVIEW
Manual
Angle
Lock release lever
Lock release lever
Hold wheel, push lever down, set angle and length, and return lever.
Power
Angle
Up
Toward the
driver
Control switch
Down
FEATURES/OPERATIONS
Away from
the driver
Length
Push the control switch, set angle and length.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Door locks (if equipped)
Unlock
Lock
SAFETY AND EMERGENCY FEATURES
11
FEATURES/OPERATIONS
TOW/HAUL switch (if equipped)
Floor shift type
Column shift type
System ON/OFF
System ON/OFF
“Tow/Haul” mode is ideal for use when carrying heavy loads. When the TOW/
HAUL switch is pressed, throttle response and transmission control are optimized
for the high performance operation. As fuel economy is reduced while in “Tow/
Haul” mode, deactivating when driving without a load is recommended.
Engine Control
When Tow/Haul is engaged, the opening angle of the electronically
controlled throttle is wider for any given accelerator pedal position than
normal, enhancing acceleration feeling and response.
Enhanced Shift Control
‡ Upshifts occur at higher engine speeds to expand the use of lower gear
ranges, enhancing power performance during towing and preventing
repeated gear changes.
‡ Downshifts occur at a greater accelerator pedal angle to allow the
vehicle to stay in a higher gear, reducing repeated gear changes.
‡ Downshifts occur at a lower accelerator pedal angle to allow the
vehicle to stay in a lower gear, enhancing towing ability.
‡ When the accelerator pedal is wide open, upshift timing is optimized to
effectively use the maximum engine power range available.
Uphill/Downhill Shift Features
‡ During uphill driving, the gear position is held to prevent repeated upshifting.
‡ During downhill driving, downshifting to lower gears will occur to effectively use
engine braking.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
12
Seat adjustments-Front
Manual seat
OVERVIEW
Separate seat
Bench seat
FEATURES/OPERATIONS
Power seat
13
SAFETY AND EMERGENCY FEATURES
Seat position (forward/backward)
Seatback angle
Seat cushion length (driver seat only)
Seat cushion (front) angle (driver seat only)
Seat height (driver seat only)
Lumbar support
Seatback angle (center)
FEATURES/OPERATIONS
Seats-Head restraints
Front
Rear-Center seat
(double cab models)
(2)
(2)
(1)
(1)
Lock release button
Lock release button
Rear-Center seat
(CrewMax models)
Rear-Outer seat
To fold
To use
(2)
(1)
Lock release button
Lock release button
Rear seats-Folding (if equipped)
(1)
(2) Pull
(3) Lift up
Moonroof (if equipped)
Sliding operation
Tilting operation
Tilt
Close
Open
Close
Push once to open/close completely. To stop partway, press the switch lightly.
14
Windshield wipers & washers
With intermittent wiper
Mist
Pull to wash
and wipe
OVERVIEW
Adjust frequency*
Interval wipe
Slow
Fast
* Intermittent windshield wiper frequency adjustment
Rotate to increase/decrease wipe frequency.
Without intermittent wiper
Mist
Pull to wash
and wipe
FEATURES/OPERATIONS
Slow
Fast
Trailer brake controller (if equipped)1
GAIN
TYPE
The trailer brakes can be controlled by the Trailer brake controller via
the 7-pin connector. By selecting the type of brakes that are being
used on the trailer (electric or electric-over-hydraulic) and setting the
gain for the controller, the manual TRAILER BRAKE OUTPUT slider
is used to slow just the trailer. The vehicle brake pedal will also slow down as well
as stop the trailer when applied. Gain values, manual brake outputs, trailer brake
types and the trailer connection status are displayed in the multi-information
display.*
* For more information on Trailer brake controller, please refer to the OWNER’S MANUAL.
15
SAFETY AND EMERGENCY FEATURES
Trailer connector
indicator
GAIN (+/-)
selection button
Trailer brake
TYPE selection
button
Manual TRAILER
BRAKE OUTPUT
slider
FEATURES/OPERATIONS
Lights & turn signals
Headlights
Auto*
Headlights
Parking lights
* If equipped
Low beam
High beam flasher
High beam
-Daytime Running Light system (DRL) Automatically turns on the headlights to
make vehicle more visible to other drivers. Not for use at night.
-Automatic light cut off system (AUTO) Automatically turns lights off after
30-second delay, or lock switch on remote may be pushed after locking.
Front fog lights (if equipped)
Turn
Front fog lights come on only when the headlights are on low beam.
Turn signals
Right turn
Lane change
Lane change
Left turn
16
Power outlets-12V DC (if equipped)
Separate seats
Inside of the console box
Back of the console box (type A)
Back of the console box (type B)
OVERVIEW
Instrument panel
FEATURES/OPERATIONS
Bench seat
Instrument panel
Back of the front center seat (type A)
Back of the front center seat (type B)
17
SAFETY AND EMERGENCY FEATURES
Key must be in the “ACC” or “ON” position to use.
FEATURES/OPERATIONS
Parking brake
Set: Depress
Release: Depress again
Windows-Power (if equipped)
Window lock switch
Driver side
Up
Down
Automatic operation (passenger side for some models and driver side) Push
the switch completely down or pull it completely up and release to fully open or
close.* To stop window partway, lightly push the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
* Not all models are equipped with one-touch close function.
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper
of the rear area of the vehicle. The camera for the rear view monitor system is
located above the license plate.
To adjust the image on the rear view monitor screen, press the “SETUP” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the
screen contrast and brightness.
Refer to the Owner‘s Manual for more details on this system.
18
Window-Rear (if equipped)
CrewMax model
Close Open
Close
OVERVIEW
Double cab model
Open
Seat heaters (if equipped) and
ventilators (if equipped)
Seat heaters
Hi
Mid
Low
off
FEATURES/OPERATIONS
Driver seat
Front passenger seat
Seat heaters and ventilators
Seat heaters
Hi
Seat ventilators
Mid
Low
off
Hi
Mid
Low
off
SAFETY AND EMERGENCY FEATURES
Driver seat
Front passenger seat
Driver seat
19
Front passenger seat
FEATURES/OPERATIONS
Air Conditioning/Heating
Automatic Air Conditioning (if equipped)
Windshield defogger (fresh air only)
Synchronize temperature settings for driver and passenger.
Air Conditioning ON/OFF
Temperature selector (front passenger side)
Airflow vent
Fan speed
Recirculate cabin air (fresh air when OFF)
Temperature selector (driver side)
Climate control OFF
Automatic climate control ON
Adjusting the temperature setting will cause the airflow vents, air intake
and fan to adjust automatically.
20
Manual Air Conditioning
OVERVIEW
Garage door opener (HomeLink®)*
(if equipped)
Refer to “Garage door opener,” Section 6-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink® is a registered trademark of Johnson Controls, Inc.
21
SAFETY AND EMERGENCY FEATURES
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
FEATURES/OPERATIONS
Recirculate cabin air (fresh air when OFF)
Air Conditioning ON/OFF
Airflow vent selector
Temperature selector
Select for maximum cooling. Air intake will automatically be set to
recirculate.
Fan speed
FEATURES/OPERATIONS
Audio
Entune™ Audio
Eject CD
Touch screen
display
Push to turn
ON/OFF
Push to access
hands-free system
Turn to tune
radio stations
manually or
select tracks
or files
Seek station/
CD track
select
Push to
display audio
screen
Entune™ Audio Plus with Connected Navigation App/Entune™ Premium (JBL®*)
Audio with Integrated Navigation and App Suite
*
*
Refer to the “Navigation System Owner’s Manual” and “2016 Entune™ Audio Quick
Reference Guide” for instructions.
* Entune™ Premium JBL® Audio
22
Steering wheel switches
OVERVIEW
Volume control
>
>
>
>
“
”“
”
Use to search within the selected audio medium (radio, CD, etc.).
“MODE”
Push to turn audio ON and select an audio mode. Push and hold to pause the
music or mute.
USB/AUX port
FEATURES/OPERATIONS
USB port
By connecting a USB-compatible portable audio device or USB memory to the
USB port, you can listen to music from the portable audio device or USB memory
through the vehicle’s speaker system.
AUX port
By inserting a mini plug into the AUX port, you can listen to music from a portable
audio device through the vehicle’s speaker system while in AUX mode.
SAFETY AND EMERGENCY FEATURES
23
FEATURES/OPERATIONS
VSC OFF switch
VSC OFF switch
Without Multi-Information Display
With Multi-Information Display
The VSC OFF switch is used to switch between modes related to the TRAC, VSC
and Auto LSD functions.
Refer to Section 4-5 of the Owner’s Manual for more information.
Multi-Information Display
Push “DISP” to scroll through the following:
(1) Total average fuel economy
(2) Instantaneous fuel economy
(3) Cruising range
(4) Running time after starting
(5) Average speed after starting
(6) Trailer Brake Controller*
(7) Setting
* Push and hold display button to reset.
Refer to your Owner’s Manual for complete details on this system before
attempting to use it.
24
Cruise control
Turning system ON/OFF
OVERVIEW
System ON/OFF
Functions
Resume2
Increase speed
Cancel1
Set
2
Decrease speed
The set speed may also be cancelled by depressing the brake pedal.
The set speed may be resumed once vehicle speed exceeds 25 mph.
Blind Spot Monitor (BSM) with Rear
Cross Traffic Alert (if equipped)
Indicator
Indicator
Buzzer
FEATURES/OPERATIONS
1
System ON/OFF
The system uses radar sensors to detect vehicles that are traveling in the area
that is not reflected in the outside rearview mirror (the blind spot), and advises
the driver of the vehicles’ existence via the outside rearview mirror indicator.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
25
SAFETY AND EMERGENCY FEATURES
The Blind Spot Monitor is a system that has two functions:
‡ The Blind Spot Monitor function (assists the driver in decision making when
changing lanes)
‡ The Rear Cross Traffic Alert function (assists the driver when backing up)
FEATURES/OPERATIONS
Telephone controls (Bluetooth®)
Audio unit
Steering wheel telephone switches
Start call
End call
Voice
command
button
Microphone
Bluetooth® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the telephone and the system.
Refer to “Using a Bluetooth® phone,” Section 5-9 in the Owner’s Manual, for more
details.
Bottle holders
Front door
Rear door (CrewMax models)
26
Cup holders
Separate seat
Bench seat
Back of the center console box
(double cab model)
Back of the front center seatback
(double cab model)
FEATURES/OPERATIONS
Front center seat
OVERVIEW
Center console
Rear seat
CrewMax model
SAFETY AND EMERGENCY FEATURES
27
SAFETY AND EMERGENCY FEATURES
Seat belts
Take up slack
Too high
Ta b
Keep as low on
hips as possible
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic locking retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
Seat belts-Shoulder belt anchor
(CrewMax and double cab models)
Down
Up
Push up, or squeeze
lock release to lower
Tire Pressure Monitoring (warning)
System
System reset initialization
1. Push and hold “
SET” button
until the indicator blinks three
times.
2. Wait several minutes to allow
initialization to complete.
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the ignition switch to “ON” and press and hold the “ SET” button until indicator
blinks three times. Let the vehicle sit for a few minutes to allow initialization to
complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains
on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes in
tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the light.
28
Doors-Child safety locks
(CrewMax and double cab models)
OVERVIEW
Rear door
Moving the lever downward will allow the door to be opened only from the outside.
Spare tire & tools
Tool location
Regular cab models
-behind the right seatback
CrewMax models
-behind the right rear seatback
Tool bag
Jack
Jack
Double cab models
-under the right rear seats
with storage box
Double cab models
-under the right rear seats
without storage box
Tool bag
FEATURES/OPERATIONS
Tool bag
Tool bag
Jack
Jack
Removing the spare tire
(3)
(2)
(1) Assemble the jack handle.
(2) Insert the jack handle end into the lowering screw.
(3) Turn the jack handle counterclockwise.
Refer to the Owner’s Manual for tire changing and jack positioning procedures.
29
SAFETY AND EMERGENCY FEATURES
(1)
SAFETY AND EMERGENCY FEATURES
Star Safety SystemTM
All new Toyota vehicles come standard with the Star Safety SystemTM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), Anti-lock
Braking System (ABS), Electronic Brake-force Distribution (EBD), Brake Assist (BA)
and Smart Stop Technology (SST).
Vehicle Stability Control (VSC)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
Traction Control (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
Anti-Lock Brake System (ABS)
ABS helps prevent brakes from locking up by “pulsing” brake pressure to each
wheel. This limits brake lockup and helps provide directional control for the
current road conditions.
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
Electronic Brake Force Distribution (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. Abrupt stops can cause a vehicle
to tilt forward, reducing the braking power of the rear wheels. EBD responds to
sudden stops by redistributing brake force to enhance the braking effectiveness of
all four wheels.
Brake Assist (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a
split second to react, Brake Assist can add additional brake pressure more quickly
than just the driver alone can.
30
Smart Stop Technology (SST)
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
OVERVIEW
Smart Stop Technology automatically reduces driving torque when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
Trailer Sway Control
Trailer sway may occur when towing a trailer due to strong crosswinds, uneven
and/or winding road conditions or the driver’s steering input.
Trailer Sway Control uses sensors to detect trailer sway and then simultaneously
and automatically helps to suppress the swaying motion of the trailer by
integrating brake and engine torque control to reduce speed and to help quickly
control the swaying motion of the trailer.
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
‡ Only use floor mats designed for your specific model.
‡ Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
‡ Install floor mats right side up.
FEATURES/OPERATIONS
Floor mat installation
Always align the ¨ marks
SAFETY AND EMERGENCY FEATURES
31
32
BLUETOOTH® DEVICE PAIRING
SECTION
33
BLUETOOTH® DEVICE PAIRING
To begin the Bluetooth® Pairing process, press the HOME button on the
faceplate of your Toyota Vehicle Entune™ Multimedia Head Unit.1
Bluetooth® Pairing for Android® phone
and Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Android mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.2
Initiate Bluetooth® on your Android®
STEP 1
From your APPS
SCREEN, select
SETTINGS
STEP 2
Select
CONNECTIONS and
select BLUETOOTH
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Select YOUR PHONE
DEVICE to make it
discoverable.
Phone will seek out
Bluetooth devices while
remaining discoverable.
STEP 5
While your Android device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
1 To determine which head unit is installed in your vehicle, refer to the Audio section in this guide.
2 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of
device and Android OS version.
34
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need
to initiate Bluetooth on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle
Entune Multimedia Head Unit,
Select SETUP BUTTON on the
Home Screen.
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
Select ADD, to add your
phone device
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
35
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit (continued)
STEP 12
STEP 13
Using your smartphone, you
will need to allow Entune
access to your messaging
and contacts
A confirmation will
appear once your phone
has been paired and
connected.
It is recommended to check the
“Don’t ask again” box, so as not
to have to press OK every time the
phone makes a Bluetooth connection
with your Toyota
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it
will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on
software, coverage & carrier.
3. Android is a trademark of Google, Inc.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you
are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
36
Bluetooth® Pairing for iPhone® and
Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all iPhone mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.
Initiate Bluetooth® on your iPhone®
STEP 1
From the HOME
SCREEN, select
SETTINGS
STEP 2
Select BLUETOOTH
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Your iPhone will seek
out Bluetooth devices
while remaining
discoverable
STEP 5
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
CONTINUE ON THE NEXT PAGE...
37
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need
to initiate Bluetooth on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
STEP 6
Select SETUP BUTTON on the
Home Screen.
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
Select ADD, to add your
phone device
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
38
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
STEP 12
STEP 13
Using your smartphone, you may need to
allow Entune access to your messaging
and contacts
A confirmation will
appear once your phone
has been paired and
connected.
Only current iPhone text messages can be viewed on
the head unit. iPhone does not allow text message
reply.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it
will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on
software, coverage & carrier.
3. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you
are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
39
BLUETOOTH® DEVICE PAIRING
Bluetooth® Pairing for Windows Phone®
and Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Windows Phone mobile digital devices have Bluetooth integrated; all you
have to do is setup the phone and multimedia system to “talk” to each other and
form a connection.
Initiate Bluetooth® on your Windows Phone®
STEP 1
From your APP LIST,
select SETTINGS
STEP 2
Select BLUETOOTH
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Phone will seek out
Bluetooth devices
while remaining
discoverable
STEP 5
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
40
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth® enabled on your phone and ready to pair, you will need
to initiate Bluetooth® on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle
Entune Multimedia Head Unit,
Select SETUP BUTTON on the
Home Screen.
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
Select ADD, to add your
phone device
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
41
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit (continued)
STEP 12
STEP 13
Using your smartphone,
you may need to allow
Entune access to your
contacts
A confirmation will
appear that your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it
will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on
software, coverage & carrier.
3. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you
are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
42
NOTES
43
NOTES
44
2016
Tundra
NOTES
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental operations
so you can locate and use the vehicle’s main equipment quickly
and easily.
The Quick Reference Guide is not intended as a substitute for the
Owner’s Manual located in your vehicle’s glove box. We strongly
encourage you to review the Owner’s Manual and supplementary
manuals so you will have a better understanding of your vehicle’s
capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales, U.S.A.,
Inc. wish you many years of satisfied driving in your new Tundra.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Tundra
operations. Every Tundra owner should review the Owner’s
Manual that accompanies this vehicle.
Pay special attention to the boxed information highlighted in
color throughout the Owner’s Manual. Each box contains safe
operating instructions to help you avoid injury or equipment
malfunction.
All information in this Quick Reference Guide is current at the
time of printing. Toyota reserves the right to make changes at
any time without notice.
45
TUNDRA
2 0 1 6
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
QUICK REFERENCE GUIDE
Printed in U.S.A. 7/15
15-TCS-08587
00505QRG16TUN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement