Toyota 2017 Tundra Quick Reference Guide

Toyota 2017 Tundra Quick Reference Guide
TUNDRA
2 0 1 7
QUICK REFERENCE GUIDE
2017
TUNDRA
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental
operations so you can locate and use the vehicle’s main
equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for
the Owner’s Manual located in your vehicle’s glove box. We
strongly encourage you to review the Owner’s Manual and
supplementary manuals so you will have a better understanding
of your vehicle’s capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales,
U.S.A., Inc. wish you many years of satisfied driving in your new
Tundra.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Tundra operations.
Every Tundra owner should review the Owner’s Manual that accompanies this
vehicle.
Pay special attention to the boxed information
­­
highlighted in color throughout
the Owner’s Manual. Each box contains safe operating instructions to help you
avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of printing.
Toyota reserves the right to make changes at any time without notice.
7
7
7
4-5
4
2-3
6
6
FEATURES & OPERATIONS
Air conditioning/heating
16
Audio
18-19
Auto lock/unlock1
8
Automatic transmission
9
Bottle holders
26
Blind Spot Monitor (BSM) with
Rear Cross Traffic Alert (RCTA)
24
Cruise control
21
Cup holders
27
Door locks
10
Four-wheel drive
22
Garage door opener (HomeLink®)3 26
Lights1 & turn signals
11
Mirrors-Power outside rear view
8
Moon roof
13
Multi-Information Display (MID)2
19
Parking assist sonar
25
Parking brake
13
Power outlets-12V DC
20
1
2
3
Rear seats-Folding
15
Rear view monitor system
17
Seat adjustments-Front
14-15
17
Seat heaters & ventilators
Seats-Head restraints
15
Telephone controls (Bluetooth®)
21
10
Tilt & telescopic steering wheel
TOW/HAUL switch
23
Trailer brake controller
22
VSC OFF switch
24
Window-Rear
13
Windows-Power
12
12
Windshield wipers & washers
SAFETY & EMERGENCY FEATURES
Doors-Child safety locks
Floor mat installation
Seat belts
Seat belts-Shoulder belt anchor
Spare tire & tools
Star Safety System
Trailer Sway Control
Tire Pressure Monitoring
(warning) System (TPMS)
BLUETOOTH® DEVICE
PAIRING SECTION
Visit your Toyota dealer for information on customizing this feature.
Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
HomeLink® is a registered trademark of Gentex Corporation.­­
1
29
31
28
28
29
30-31
31
FEATURES & OPERATIONS
Engine maintenance
Fuel tank door release & cap
Hood release
Indicator symbols
Instrument cluster
Instrument panel
Keyless entry1
Light control-Instrument cluster
FEATURES & OPERATIONS (continued)
28
32-41
SAFETY & EMERGENCY FEATURES
OVERVIEW
OVERVIEW
INDEX
OVERVIEW
Instrument panel
Voice command button1,2
Audio control switches2
Telephone controls2
Multi-Information Display
(MID) control switches1
Cruise control switch1
Steering wheel controls
Headlight, turn signal and
front fog light1 controls
Instrument Cluster
Headlight leveling dial1
Personal/Interior lights main switch
Power rearview mirror controls1
Tilt and telescopic
steering wheel switch
(power adjustable)1
Hood release
Cargo lamp main switch
Power back window switch1
Blind Spot Monitor (BSM) with Rear Cross
Traffic Alert (RCTA) main switch1
2
Tilt and telescopic
steering wheel1
1
If equipped.
For vehicles with a navigation system, refer to the “Navigation System Owner’s
Manual” and “2017 Entune™ Audio Quick Reference Guide.”
NOTE: Instrument panel features depend on the seat option, separated or
bench.
OVERVIEW
2
Wiper and washer controls
Automatic transmission shift lever1
Two-wheel/Four-wheel drive selector1
Display Audio system2
Air conditioning controls1
FEATURES & OPERATIONS
Emergency flasher switch
AUX port/USB port1
12V DC power outlets
Intuitive parking assist button1
TOW/HAUL switch1
Ignition
switch
VSC OFF switch
Trailer brake controller1
Tire Pressure Monitoring
(warning) System (TPMS)
3
SAFETY & EMERGENCY FEATURES
Automatic transmission shift lever1
OVERVIEW
Instrument cluster
Tachometer
Oil pressure gauge
Engine coolant temperature gauge
Fuel gauge
Multi-Information Display/
Trip information display
ODO/TRIP display switch and
instrument panel light control button
Speedometer
Voltmeter
Service indicators and reminders
For details, refer to “Indicators and warning lights,” Section 2-2, 2017 Owner’s
Manual.
Brake system warning1
Charging system warning1
Malfunction/Check Engine indicator1
Airbag SRS warning1
Low fuel level warning
Master warning1
4
Open door warning
Low Tire Pressure Warning1
Blind Spot Monitor outside rearview mirror indicators3
OVERVIEW
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Theft deterrent/Engine immobilizer system indicator
Front passenger occupant classification or front passenger airbag ON/OFF indicator
Headlight low/high beam indicator
Turn signal indicator
High/Low speed four-wheel drive indicator3
Slip indicator1
TOW/HAUL mode indicator
AUTO Limited Slip Differential indicator1
Cruise control indicator2/Cruise control SET indicator
Anti-lock Brake System warning1
FEATURES & OPERATIONS
Vehicle Stability Control ­OFF indicator1
Trailer connection indicator3
1
If indicator does not turn off within a few seconds of starting engine, there may be a malfunction.
Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” Section 4-5, 2017 Owner’s Manual.
3 If equipped.
5
SAFETY & EMERGENCY FEATURES
Arrow direction indicates fuel tank door position
OVERVIEW
Keyless entry
UNLOCKING OPERATION
Push
ONCE: Driver door
TWICE: All doors
LOCKING OPERATION
Push
NOTE: If a door is not opened within 30 seconds of unlocking, all doors will relock for
safety.
PANIC BUTTON
Push and hold
Light control-Instrument cluster
Brightness
control
+
6
Fuel tank door release & cap
OVERVIEW
Store
Pull
Turn to open
NOTE: Tighten until one click is heard.
If the cap is not tightened enough,
Check Engine “
” indicator may
illuminate.
FEATURES & OPERATIONS
Hood release
Pull up latch and
raise hood
Pull
Engine maintenance
4.6L 8 CYLINDER (1UR-FE) AND
5.7L 8 CYLINDER (3UR-FE/3UR-FBE) ENGINES
Engine oil level dipstick
Engine coolant reservoir
Engine oil filler cap
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer
to the “Warranty & Maintenance Guide.”
7
SAFETY & EMERGENCY FEATURES
Windshield washer fluid tank
FEATURES & OPERATIONS
Auto lock/unlock
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
Doors lock when shifting from Park.
Doors unlock when shifting into Park.
Speed linked door locking/unlocking function
Doors lock when the vehicle speed goes above approximately 12 mph.
Driver’s door linked door locking/unlocking function
Doors unlock within 10 seconds after the engine switch is turned to “LOCK” and
driver’s door is opened.
Refer to the Owner’s Manual for more details.
Mirrors-Power outside rear view (if equipped)
ADJUST
Type A
Select left
or right
Adjust
Type B
Fold mirrors in
Return mirrors to
original position
Key must be in the “ACC” or “ON” position.
Refer to the Owner’s Manual for more details.
EXTEND
Type B
Mirrors can be manually slid outward to improve visibility while towing.
8
Automatic transmission
+ (“S” mode)
Park*
OVERVIEW
FLOOR SHIFT TYPE
Reverse
Neutral
Drive
- (“S” mode)
N
“S” mode
COLUMN SHIFT TYPE
+ (“S” mode)
Reverse
Neutral
Drive
- (“S” mode)
N
“S” mode
FEATURES & OPERATIONS
Park*
* The ignition switch must be set at “ON” and the brake pedal depressed to shift
from Park.
“S” (SEQUENTIAL) MODE
Floor shift type:
+ : Upshift (push and release)
- : Downshift (pull and release)
Column shift type:
+ : Upshift (push and release)
- : Downshift (push and release)
Downshifting increases power going uphill, or provides engine braking downhill. For
best fuel economy during normal driving conditions, always drive with the shift lever
in the “D” position.
9
SAFETY & EMERGENCY FEATURES
Shift the shift lever to “S” position from “D” position.
FEATURES & OPERATIONS
Tilt & telescopic steering wheel (if equipped)
MANUAL
Tilt steering wheel
Tilt and telescopic steering wheel
Angle
Length
Angle
Lock release lever
Lock release lever
Hold wheel, push lever down, set angle and length, and return lever.
POWER
Angle
Up
Away from
the driver
Toward the
driver
Control switch
Down
Push the control switch, set angle and length.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Door locks (if equipped)
Unlock
Lock
10
Length
Lights & turn signals
Auto*
* If equipped
Headlights
Parking lights
OVERVIEW
HEADLIGHTS
OFF
Low beam
High beam flasher
Daytime Running Light system (DRL) Automatically turns on the headlights to
make vehicle more visible to other drivers. Not for use at night.
Automatic light cut off system (AUTO) Automatically turns lights off after
30-second delay, or lock switch on remote may be pushed after locking.
FRONT FOG LIGHTS (IF EQUIPPED)
FEATURES & OPERATIONS
High beam
Turn
Front fog lights come on only when the headlights are on low beam.
SAFETY & EMERGENCY FEATURES
TURNING SIGNALS
Right turn
Lane change
Lane change
Left turn
11
FEATURES & OPERATIONS
Windshield wipers & washers
WITH INTERMITTENT WIPER
Adjust frequency*
Mist
Pull to wash
and wipe
Interval wipe
Slow
Fast
* Intermittent windshield wiper frequency adjustment Rotate to increase/
decrease wipe frequency.
2
WITHOUT INTERMITTENT WIPER
Mist
Pull to wash
and wipe
Slow
Fast
Windows-Power (if equipped)
Window lock switch
Driver side
Up
Down
Automatic operation (passenger side for some models and driver side) Push
the switch completely down or pull it completely up and release to fully open or
close.* To stop window part way, lightly push the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
* Not all models are equipped with one-touch close function.
12
Window-Rear (if equipped)
CrewMax model
OVERVIEW
Double cab model
Double cab model
Close
Open
Close
Open
CrewMax model
Moon roof (if equipped)
TILTING OPERATION
FEATURES & OPERATIONS
SLIDING OPERATION
Tilt
Open
Close
Close
Push once to open/close completely. To stop partway, press the switch lightly.
Set: Depress
Release: Depress again
13
SAFETY & EMERGENCY FEATURES
Parking brake
FEATURES & OPERATIONS
Seat adjustments-Front
MANUAL SEAT (IF EQUIPPED)
Separate seat
Seatback angle
Seat position (forward/backward)
Bench seat
Seatback angle (center)
Seatback angle
Seat position (forward/backward)
POWER DRIVER’S SEAT (IF EQUIPPED)
Seat position (forward/backward)
Seat cushion length Seat cushion (front)
(driver seat only)
angle (driver seat only)
14
Seatback angle
Seat height
Lumbar support
(driver seat only)
OVERVIEW
POWER PASSENGER’S SEAT (IF EQUIPPED)
Seat position (forward/backward)
Lumbar support
Seatback angle
Rear seats-Folding (if equipped)
FEATURES & OPERATIONS
(3) Lift up
(2)
(1)
Pull
Seats-Head restraints
Front
Rear-Center seat (Double Cab models)
(2)
(2)
(1)
Lock release button
Rear-Center seat (CrewMax models)
Rear-Outer seat
To use
To fold
(2)
(1)
Lock release button
Lock release button
15
SAFETY & EMERGENCY FEATURES
(1)
Lock release button
FEATURES & OPERATIONS
Air conditioning/heating
AUTOMATIC AIR CONDITIONING (IF EQUIPPED)
Automatic climate control ON
Adjusting the temperature setting will Windshield defogger
cause the airflow vents, air intake and (outside air only)
fan to adjust automatically.
Rear view mirrors
defogger*
Synchronize temperature
settings for driver and
passenger.
Air conditioning ON/OFF
Climate control OFF
Temperature selector
(front passenger side)
Temperature selector
(driver side)
Airflow vent
*If equipped
Recirculate cabin air
Fan speed
(outside air when OFF)
MANUAL AIR CONDITIONING (IF EQUIPPED)
Recirculate cabin air
(fresh air when OFF)
Air Conditioning ON/OFF
Rear view mirrors
defogger*
Fan speed
Select for maximum cooling. Air intake
will automatically be set to recirculate.
Temperature selector
*If equipped
16
Airflow vent selector
Seat heaters & ventilators
SEAT HEATERS (IF EQUIPPED)
Mid
Low
Off
OVERVIEW
Hi
Driver seat
Front passenger seat
SEAT HEATERS & VENTILATORS (IF EQUIPPED)
Hi
Seat ventilators
Mid
Driver seat
Low
Off
Front
passenger seat
Hi
Driver seat
Mid
Low
Off
FEATURES & OPERATIONS
Seat heaters
Front
passenger seat
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “SETUP” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the screen
contrast and brightness.
Refer to the Owner‘s Manual for limitations and more details on this system.
17
SAFETY & EMERGENCY FEATURES
Rear view monitor system
FEATURES & OPERATIONS
Audio
Entune™ Audio
Eject CD
Touch screen
display
Push to access handsfree system
Push to turn
ON/OFF
Turn to tune
radio stations
manually or
select tracks or
files
Seek station/
CD track select
Push to display
audio screen
Entune™ Audio Plus with Connected Navigation App/
Entune™ Premium (JBL®*) Audio with Integrated Navigation and App Suite
*
*
Refer to the “Navigation System Owner’s Manual” and “2017 Entune™ Audio Quick
Reference Guide” for instructions.
* Entune™ Premium (JBL®) Audio
STEERING WHEEL SWITCHES
Select
>
>
>
>
”“
”
“
Use to search within the selected
audio medium (radio, CD, etc.).
“MODE”
Push to turn audio ON and select
an audio mode. Push and hold to
pause the music or mute.
Volume control
18
Return to
previous screen
OVERVIEW
USB/AUX PORT
USB port
By connecting a USB-compatible portable audio device or USB memory to the
USB port, you can listen to music from the portable audio device or USB memory
through the vehicle’s speaker system.
Push “DISP” to scroll through the following:
(1) Trip information
(5) Intuitive parking assist display
(2) Shift position and shift range
(6) Warning messages
(3) Odometer and trip meter display
(4) Turn-by-turn navigation (vehicles
with navigation system)
* Push and hold display button to reset.
Refer to your Owner’s Manual for complete details.
19
SAFETY & EMERGENCY FEATURES
Multi-Information Display (MID)
FEATURES & OPERATIONS
AUX port
By inserting a mini plug into the AUX port, you can listen to music from a portable
audio device through the vehicle’s speaker system while in AUX mode.
FEATURES & OPERATIONS
Power outlets-12V DC (if equipped)
SEPARATE SEATS
Instrument panel
Inside of the console box
Back of the console box (Type A)
Back of the console box (Type B)
BENCH SEAT
Instrument panel
Back of the front center seat (Type A)
Back of the front center seat (Type B)
Key must be in the “ACC” or “ON” position to use.
20
Telephone controls (Bluetooth®)
• Make a call
• Receive a call
• Display “Phone” screen
OVERVIEW
Steering wheel telephone switches
• End a call
• Refuse a call
Bluetooth® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the telephone and the system.
Refer to “Using a Bluetooth® phone,” Section 5-9 in the Owner’s Manual, for more
details.­
Cruise control (if equipped)
TURNING SYSTEM ON/OFF
FEATURES & OPERATIONS
Microphone
System ON/OFF
Resume2
Increase speed
Cancel1
Set
Decrease speed
1 The
2
set speed may also be cancelled by depressing the brake pedal.
The set speed may be resumed once vehicle speed exceeds 25 mph.
21
SAFETY & EMERGENCY FEATURES
FUNCTIONS
FEATURES & OPERATIONS
Four-wheel drive (if equipped)
Turn
Push and turn
Turn
2WD
4H
4L
High speed (2WD) Normal driving on dry hard-surfaced roads.
High speed (4WD) For driving only on roads that permit the tires to
slide, like off-road, icy or snow-covered roads.
Low speed (4WD)
For maximum power and traction when climbing or descending steep
hills, off-road driving, and hard pulling in sand, mud or deep snow.
Shifting between “2WD” and “4H”
Reduce speed to less than 62 mph, then turn control to “2WD” or “4H.”
Shifting between “4H” and “4L”
Shift to “N” position when stopped, then turn to “4L” from “4H.”
NOTE: For best fuel economy and performance under normal driving
conditions, keep in “2WD” position.
Trailer brake controller (if equipped)
GAIN (+/-) selection button
GAIN
TYPE
Manual TRAILER
BRAKE OUTPUT slider
Trailer connector indicator
Trailer brake TYPE selection button
The trailer brakes can be controlled by the Trailer brake controller via the 7-pin
connector. By selecting the type of brakes that are being used on the trailer
(electric or electric-over-hydraulic) and setting the gain for the controller, the
manual TRAILER BRAKE OUTPUT slider is used to slow just the trailer. The vehicle
brake pedal will also slow down as well as stop the trailer when applied. Gain
values, manual brake outputs, trailer brake types and the trailer connection status
are displayed in the multi-information display.
For more information, please refer to the Owner’s Manual.
22
TOW/HAUL switch (if equipped)
Column shift type
OVERVIEW
Floor shift type
System ON/OFF
When Tow/Haul is engaged, the opening angle of the electronically
controlled throttle is wider for any given accelerator pedal position than
normal, enhancing acceleration feeling and response.
ENHANCED SHIFT CONTROL
• Upshifts occur at higher engine speeds to expand the use of lower gear
ranges, enhancing power performance during towing and preventing
repeated gear changes.
• Downshifts occur at a greater accelerator pedal angle to allow the
vehicle to stay in a higher gear, reducing repeated gear changes.
• Downshifts occur at a lower accelerator pedal angle to allow the
vehicle to stay in a lower gear, enhancing towing ability.
• When the accelerator pedal is wide open, upshift timing is optimized to
effectively use the maximum engine power range available.
UPHILL/DOWNHILL SHIFT FEATURES
• During uphill driving, the gear position is held to prevent repeated upshifting.
• During downhill driving, downshifting to lower gears will occur to effectively use
engine braking.
Refer to the Owner‘s Manual for more details on this system before attempting to
use it.
23
SAFETY & EMERGENCY FEATURES
ENGINE CONTROL
FEATURES & OPERATIONS
“Tow/Haul” mode is ideal for use when carrying heavy loads. When the TOW/HAUL
switch is pressed, throttle response and transmission control are optimized for the
high performance operation. As fuel economy is reduced while in “Tow/Haul” mode,
deactivating when driving without a load is recommended.
FEATURES & OPERATIONS
VSC OFF switch
VSC OFF switch
The VSC OFF switch is used to switch between modes related to the TRAC, VSC
and Auto LSD functions.
Refer to Section 4-5 of the Owner’s Manual for more information.
Blind Spot Monitor (BSM) with
Rear Cross Traffic Alert (RCTA) (if equipped)
Indicator
Indicator
Buzzer
System ON/OFF
The BSM is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in decision making when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system uses radar sensors to detect vehicles that are traveling in the Tundra’s
blind spot and advises the driver of the vehicles’ existence via the outside rearview
mirror indicator.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
24
OVERVIEW
Parking assist sonar (if equipped)
Rear
corner sensor
Rear
center sensor
Rear
corner sensor
FEATURES & OPERATIONS
Front corner sensors
When the sensor detects an obstacle, the direction of and the approximate distance
to the obstacle are displayed on the MID display by illuminating continuously (far)
or blinking (near), and beeping sounds will switch from intermittent to continuous as
you approach and get closer to a detected obstacle. When the sensors detect two
or more obstacles, the audible alerts will respond to the nearest zone.
Always check the surrounding area when using this system.
Refer to section Intuitive parking assist in the Owner’s Manual for more details.
25
SAFETY & EMERGENCY FEATURES
The parking assist sonar system operates when the vehicle approaches an
obstacle. The distance from your vehicle to nearby obstacles when parallel parking
or maneuvering into a garage is measured by sensors and communicated via the
Multi-Information Display (MID) and audible beeps.
FEATURES & OPERATIONS
Garage door opener (HomeLink®)* (if equipped)
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 6-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink® is a registered trademark of Johnson Controls, Inc.
Bottle holders
Front door
Rear door (CrewMax models)
26
SAFETY & EMERGENCY FEATURES
Cup holders
Center console
Front center seat
Back of the center console box
(double cab model)
Back of the front center seatback
(double cab model)
OVERVIEW
BENCH SEAT
FEATURES & OPERATIONS
SEPARATE SEAT
REAR SEAT
SAFETY & EMERGENCY FEATURES
CrewMax model
27
SAFETY & EMERGENCY FEATURES
Seat belts
Take up slack
Too high
Ta b
Keep as low on
hips as possible
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic locking retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
Seat belts-Shoulder belt anchor
(CrewMax & double cab models)
Push up, or squeeze
lock release to lower
Down
Up
Tire Pressure Monitoring (warning) System (TPMS)
System reset initialization
1. Push and hold “
SET” button until
the indicator blinks three times.
2. Wait several minutes to allow
initialization to complete.
After adjusting tire pressures, or after tires have been rotated or replaced, turn the
ignition switch to “ON” and press and hold the “ SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.­
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
28
Doors-Child safety locks
OVERVIEW
CrewMax & double cab models
Rear door
Spare tire & tools
TOOL LOCATION
Regular cab models
(behind the right seatback)
CrewMax models
(behind the right rear seatback)
Tool bag
Jack
Double cab models
(under the right rear seats with storage box)
Double cab models
(under the right rear seats
without storage box)
Tool bag
Tool bag
FEATURES & OPERATIONS
Tool bag
Jack
Jack
Jack
REMOVING THE SPARE TIRE
(2)
(3)
(1) Assemble the jack handle.
(2) Insert the jack handle end into the lowering screw.
(3) Turn the jack handle counterclockwise.
Refer to the Owner’s Manual for tire changing and jack positioning procedures.
29
SAFETY & EMERGENCY FEATURES
(1)
SAFETY & EMERGENCY FEATURES
Star Safety System™
All new Toyota vehicles come standard with the Star Safety SystemTM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), Anti-lock Braking
System (ABS), Electronic Brake-force Distribution (EBD), Brake Assist (BA) and
Smart Stop Technology (SST).
Refer to the Owner’s Manual for more details and important information on
limitations to these systems.
VEHICLE STABILITY CONTROL (VSC)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
TRACTION CONTROL (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
surfaces by applying brake force to the spinning wheel(s).
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
ANTI-LOCK BRAKE SYSTEM (ABS)
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
ELECTRONIC BRAKE FORCE DISTRIBUTION (EBD)
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. Abrupt stops can cause a vehicle to tilt
forward, reducing the braking power of the rear wheels. EBD responds to sudden
stops by redistributing brake force to enhance the braking effectiveness of all four
wheels.
BRAKE ASSIST (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a split
second to react, Brake Assist can add additional brake pressure more quickly than
just the driver alone can.
30
SMART STOP TECHNOLOGY (SST)
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
OVERVIEW
Smart Stop Technology automatically reduces engine power when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
Trailer Sway Control
Trailer sway may occur when towing a trailer due to strong crosswinds, uneven and/
or winding road conditions or the driver’s steering input.
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use Toyota floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
• Install floor mats right side up.
FEATURES & OPERATIONS
Trailer Sway Control uses sensors to detect trailer sway and then simultaneously
and automatically helps to suppress the swaying motion of the trailer by integrating
brake and engine torque control to reduce speed and to help quickly control the
swaying motion of the trailer.
SAFETY & EMERGENCY FEATURES
Always align the Δ marks
31
BLUETOOTH® DEVICE PAIRING
SECTION
Do not attempt the Bluetooth® Pairing process while driving.
32
To begin the Bluetooth® Pairing process, press the HOME button on the faceplate of
your Toyota Vehicle Entune™ Multimedia Head Unit.1
Bluetooth® Pairing for Android phone and
Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Android mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.2
Initiate Bluetooth® on your Android®
STEP 1
From your APPS
SCREEN, select
SETTINGS.
STEP 2
STEP 3
Select
CONNECTIONS and
select BLUETOOTH.
Ensure
BLUETOOTH
is ON.
STEP 5
STEP 4
Select YOUR PHONE
DEVICE to make it
discoverable.
Phone will seek out
Bluetooth devices
while remaining
discoverable.
While your Android device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
1
To determine which head unit is installed in your vehicle, refer to the Audio section in this guide.
Entune™ Premium Audio screens are shown in this section. Screens and features may vary by
Entune™ system.
2 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of device and Android OS version.
33
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need to
initiate Bluetooth on your Entune head unit. Please follow the instructions below to
pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle Entune
Multimedia Head Unit, Select
SETUP BUTTON on the Home
Screen.
STEP 7
Select BLUETOOTH.
Image shown is a sample
image, features may vary.
STEP 8
Select ADD, to add your
phone device.
For Entune™ Audio System,
press the SETUP BUTTON
on the faceplate to access the
Setup Screen.
STEP 9
STEP 10
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
Your smartphone is now
paired with Entune.
STEP 11
You may need to enter the
provided Bluetooth PIN on
your phone.
34
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
STEP 12
Using your smartphone, you will
need to allow Entune access to
your messaging and contacts.
It is recommended to check the
“Don’t ask again” box, so as not
to have to press OK every time the
phone makes a Bluetooth connection with your Toyota.
STEP 13
A confirmation will appear once your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get more information
from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia
software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free
phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired.
Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google Inc.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large
amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/
entune for details.
35
BLUETOOTH® DEVICE PAIRING
Bluetooth® Pairing for iPhone and
Entune™ touch screen system
**Do not attempt the Bluetooth® Pairing process while driving.**
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all iPhone mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.
Initiate Bluetooth® on your iPhone®
STEP 1
From the HOME
SCREEN, select
SETTINGS.
STEP 2
Select BLUETOOTH.
STEP 3
Ensure
BLUETOOTH
is ON.
STEP 4
Your iPhone will seek
out Bluetooth devices
while remaining
discoverable.
STEP 5
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
36
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need to
initiate Bluetooth on your Entune head unit. Please follow the instructions below to
pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle Entune
Multimedia Head Unit, Select
SETUP BUTTON on the Home
Screen.
STEP 7
Select BLUETOOTH.
Image shown is a sample
image, features may vary.
STEP 8
Select ADD, to add your
phone device.
For Entune™ Audio System,
press the SETUP BUTTON
on the faceplate to access the
Setup Screen.
STEP 9
STEP 10
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
Your smartphone is now
paired with Entune.
STEP 11
You may need to enter the
provided Bluetooth PIN on
your phone.
37
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH® DEVICE PAIRING
STEP 12
STEP 13
Using your smartphone, you may need to
allow Entune access to your messaging
and contacts.
A confirmation will appear once your phone
has been paired and
connected.
Only current iPhone text messages can
be viewed on the head unit. iPhone does
not allow text message reply.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get more information
from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia
software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free
phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired.
Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google Inc.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large
amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/
entune for details.
38
Bluetooth® Pairing for Windows Phone and
Entune™ touch screen system
**Do not attempt the Bluetooth® Pairing process while driving.**
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Windows Phone mobile digital devices have Bluetooth integrated; all you
have to do is setup the phone and multimedia system to “talk” to each other and
form a connection.
Initiate Bluetooth® on your Windows Phone®
STEP 1
From your APP LIST,
select SETTINGS.
STEP 2
Select BLUETOOTH.
STEP 3
Ensure
BLUETOOTH
is ON.
STEP 4
Phone will seek out
Bluetooth devices
while remaining
discoverable.
STEP 5
While your iPhone device is seeking
out Bluetooth devices, proceed to your
Entune Multimedia Head Unit on your
Toyota vehicle.
39
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth® enabled on your phone and ready to pair, you will need
to initiate Bluetooth® on your Entune head unit. Please follow the instructions below
to pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle Entune
Multimedia Head Unit, Select
SETUP BUTTON on the Home
Screen.
STEP 7
Select BLUETOOTH.
Image shown is a sample
image, features may vary.
STEP 8
Select ADD, to add your
phone device.
For Entune™ Audio System,
press the SETUP BUTTON
on the faceplate to access the
Setup Screen.
STEP 9
STEP 10
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
Your smartphone is now
paired with Entune.
STEP 11
You may need to enter the
provided Bluetooth PIN on
your phone.
40
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
STEP 12
Using your smartphone,
you may need to allow
Entune access to your
contacts.
STEP 13
A confirmation will appear that your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get more information
from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia
software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free
phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired.
Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google Inc.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large
amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/
entune for details.
41
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
FPO
Printed in U.S.A. 9/16
16-MKG-09519
00505QRG17TUN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement