Toyota 2009 Camry Quick Reference Guide

412033M1.indd 1

MN 00505-NAV09-CAM

Printed in the USA 12/07

12/20/07 5:23:46 PM

TABLE OF CONTENTS

LIMITATIONS OF THIS QUICK REFERENCE GUIDE 1

By Address

Voice Recognition Sequence

Tips for Using Voice Recognition

By Address - Voice Recognition

DESTINATION INPUT - POINTS OF INTEREST (POI)

Points of Interest by Name

Points of Interest by Category

Points of Interest by Category - Voice Recognition

DESTINATION INPUT - TELEPHONE NUMBER

Business or Registered Memory Points

8

9

7

7

5

5

3

5

10

10

CALLING BY VOICE RECOGNITION 14

ADDITIONAL NAVIGATION FEATURES

Search Area

Route Preferences

3 Routes

Screen Preferences

Beep Setting

Volume Setting

Keyboard Setting

Screen Transition

Freeway Exit Info Mode

16

16

Estimated Distance and Time 17

Operation of Your Vehicle Emergency Screen 17

15

16

16

16

15

15

15

15

NOTE ON VOICE RECOGNITION 18

LIMITATIONS OF THIS QUICK REFERENCE GUIDE

This Quick Reference Guide is designed to provide information on the basic operation and key features of the navigation system.

The Quick Reference Guide is not intended as a substitute for the Navigation Owner’s Manual. We strongly encourage you to review the Navigation Owner’s Manual so you will have a better understanding of the navigation system capabilities and limitations.

1

412033M1.indd 2

VOICE COMMANDS

Press the voice command button on the steering wheel to activate the voice recognition feature.

After you hear a beep, say one of the voice commands listed or say “Help” for additional options. Please refer to the Navigation Owner’s Manual for additional information.

.!6)'!4)/.-/$%

$%34).!4)/.

'OHOME

!DDRESS

$ELETEFINALDESTINATION

-!0/0%2!4)/.

3HOWMAP

:OOM)N

:OOM/UT

0/)

.EARESTh???????v

!4-

!IRPORT

!MUSEMENTPARK

"ANK

'5)$!.#%(%,0

2EPEATGUIDANCE

!RROWGUIDANCE

4URNLISTGUIDANCE

4URNBYTURNGUIDANCE

2ESUMEGUIDANCE

3TOPGUIDANCE

&REEWAYGUIDANCE

)NTERSECTIONGUIDANCE

3#2%%.

02%&%2%.#%3

3INGLEMAP

$UALMAP

#OMPASSMODE

6/,5-%

,OUDER

3OFTER

#ARWASH

#OFFEEHOUSE

#ONVENIENCESTORE

$EPARTMENTSTORE

$RYCLEANING

&ERRY4ERMINAL

'ASSTATION

'OLFCOURSE

'ROCERYSTORE

(ISTORICALMONUMENTS

(OMEANDGARDEN

,IBRARY

0ARKS

0HARMACY

0OST/FFICE

2ESTAURANT

2ESTAREAORRESTSHOP

3PECIALTYFOODSTORE

3TADIUM

4HEATER

4OURISTINFORMATION

6IDEORENTAL

:OO

(IDE)CONS

4%,%0(/.%-/$%

#!,,).'

$IALBY.UMBER

$IALBY.AME

$IAL

#ANCEL

-/$%

2ADIO

!-

&-&-OR&-

3!4

#$CHANGER

&5.#4)/.3

!UDIOON

!UDIOOFF

.EXTTRACK

0REVIOUSTRACK

3EEKUP

3EEKDOWN

.EXTDISC

0REVIOUSDISC

!VAILABLEDURINGROUTEGUIDANCE

.EARESTh?????v2ESTAURANT!MERICAN#HINESE&AST)TALIAN&RENCH*APANESE-EXICAN3EAFOOD

OR/THER &OODORRESTAURANT MAYBEUSEDINTERCHANGEABLY

NOTE ON VOICE RECOGNITION

The navigation system voice recognition feature will compare your spoken words with computer-generated word patterns preprogrammed in the system database. If the system does not provide your intended match, please try a different pronunciation.

Voice-activation names are not available for every street and city.

Please see the Tips for Using Voice Recognition section on page 5 for more information about this feature.

18

12/20/07 5:23:46 PM

412033M1.indd 3

BASIC OPERATION

£ INFO Button

Access Maintenance, Telephone,

Calendar, Language, and Screen

Settings.

Ó MENU Button

Access Voice Guidance Volume, Select

User, My Places, Setup and Suspend

Guidance.

Î DESTINATION Button

Input the destination by one of several methods and initiate route guidance.

{ MAP/VOICE Button

Repeat the last voice guidance prompt or cancel one touch scroll.

x CURRENT VEHICLE POSITION Mark

Indicates the current position of the vehicle and its directional heading.

È ZOOM IN/ZOOM OUT Icons

Touch to magnify or reduce the map scale.

Ç DISPLAY Button

Adjust the contrast, brightness or turn off the screen. n AUDIO Button

Set the radio station presets, adjust the balance and tone controls.

™ NORTH UP OR COMPASS MODE Icon

Touch to change the map display between North-up or Head-up perspectives.

2

12/20/07 5:23:47 PM

DESTINATION INPUT

BY ADDRESS step 1 Press the followed by

panel button

and move to step 3. To change Search Area, touch and move to step 2.

step 2 Select the appropriate Search

Area, then touch OK to confi rm the selection.

step 3 Input the house number using the number keys.

step 4 Touch and input the street name using the letter keys.

Touch to see all of the available options.

3 step 5 Use or to scroll up or down one page if necessary. Touch the desired street.

step 6 Touch to type in the city name or select from a previously registered city. If the city is not available try the next largest city in the vicinity.

412033M1.indd 4 12/20/07 5:23:48 PM

412033M1.indd 5

DESTINATION INPUT

BY ADDRESS step 7 Use or to scroll up or down one page if necessary. Touch the desired city.

step 8 Select the desired Route Preference by touching the Route Preference icon.

step 9 Select the desired Route

Preference(s) for the trip. When the yellow bar appears, the route has been selected. Touch to confi rm your selection.

step 10 If necessary, use the arrow keys to adjust the position on the map to put you closer to your destination. Touch to confi rm the position.

Quick Tip - Enter the street name without prefi xes such as North or the letter N. The system will display all of the options available.

step 11 Touch .

4

12/20/07 5:23:49 PM

DESTINATION INPUT

VOICE RECOGNITION SEQUENCE

£ 02%33 Ó 02%33 h

2%0,9 h!DDRESSv

h

2%0,9 hSTATENAMEv h

2%0,9 hCITYNAMEv

0 h

# h3ELECT3TREETv

2%0,9

2 h

E

BELOW x 02%33 h

#

3 h A

2

2%0,9

TIPS FOR USING VOICE RECOGNITION tip 1 Have the full and correct address in mind, so you can speak it as prompted. Example:

“19001 South Western Avenue, Torrance,

California” tip 2 Before using voice recognition, roll up all windows and set the climate control fan on low or off to reduce background noise in the cabin.

tip 3 Speak at a normal volume and pace, and pronounce words clearly.

tip 4 When saying street names, include North,

South, East or West and Street, Avenue,

Boulevard, etc. in the name.

tip 5 Numbered street names should be spoken as in these examples:

1st Street, say: “First Street”

15th Street, say: “Fifteenth Street”

190th Street, say: “One Hundred

Ninetieth Street”

BY ADDRESS - VOICE RECOGNITION tip 6 Say a street address number as single digits. Examples:

125, say: “One two fi ve”

2000, say: “Two zero zero zero”

32307, say: “Three two three zero

seven”

5 step 1 Press the voice command button on the steering wheel and wait for the beep. After the beep say, “Address.” step 2 The system will confi rm your input by repeating “Address” and displaying the command at the top of the screen.

412033M1.indd 6 12/20/07 5:23:50 PM

412033M1.indd 7

DESTINATION INPUT

BY ADDRESS - VOICE RECOGNITION step 3 Press the voice command button on the steering wheel and wait for the beep. After the beep say,

“California.” For your destination, choose the appropriate state.

step 4 Press the voice command button on the steering wheel and wait for the beep. After the beep say, “Los

Angeles.” For your destination, choose the appropriate city.

step 5 Press the voice command button on the steering wheel and wait for the beep. After the beep say, “Adams

Boulevard.” For your destination, choose the appropriate street.

step 6 Press the voice command button on the steering wheel and wait for the beep. After the beep say, “One Zero

Zero.” For your destination, choose the appropriate numerical address.

step 7 Press the voice command button on the steering wheel and wait for the beep. After the beep say, “Enter destination” or touch .

step 8 Touch .

6

12/20/07 5:24:01 PM

DESTINATION INPUT - POINTS OF INTEREST (POI)

POINTS OF INTEREST BY NAME step 1 Press the followed by

panel button

icon to access points of interest by name.

step 2 Input the POI name using the letter keys and then touch .

step 3 Use or to scroll up or down one page if necessary. Touch the desired selection.

step 4 Select the desired Route Preference and then touch .

Quick Tip - If the POI isn’t listed in the database verify the spelling and Search Area for accuracy.

Quick Tip - Touching the button next to the POI name will display the address and telephone number.

step 5 Touch .

7

412033M1.indd 8 12/20/07 5:24:01 PM

412033M1.indd 9

DESTINATION INPUT - POINTS OF INTEREST (POI)

POINTS OF INTEREST BY CATEGORY step 1 Press the followed by the

panel button

icon to access the points of interest by category.

step 2 Touch the icon to search for points of interest in the vicinity. step 3 Touch the icon.

step 4 Touch the icon followed by OK and then touch to see the points of interest in the vicinity.

step 5 Use or to scroll up or down one page if necessary. Touch the point of interest followed by and then .

8

12/20/07 5:24:02 PM

DESTINATION INPUT - POINTS OF INTEREST (POI)

POINTS OF INTEREST BY CATEGORY - VOICE RECOGNITION step 1 Press the voice command button on the steering wheel and wait for the beep. After the beep say, “Nearest hotel.” Most POI categories can be found by saying, “Nearest <POI category.>” step 2 Press the voice command button on the steering wheel and wait for the beep. After the beep say,

“Add to destination” or “Replace destination.” To see a list say,

“Show list.” step 3 Select the point of interest followed by touching and then .

9

412033M1.indd 10 12/20/07 5:24:02 PM

412033M1.indd 10

DESTINATION INPUT - TELEPHONE NUMBER

BUSINESS OR REGISTERED MEMORY POINTS step 1 Press the followed by the

panel button

icon.

step 2

Touch the telephone number.

icon to input step 3 Input the area code and telephone number using the number keys followed by the icon. It is not necessary to dial “1.” step 4 Select the business or assigned memory point from the screen.

step 5 Select the desired Route

Preference and then touch .

step 6 Touch .

10

12/20/07 5:24:02 PM

REGISTER HOME

panel button step 1 Press the followed by the icon to register your home. Touch to input your home address.

step 2 Make sure that you are in the desired Search Area. Touch the

icon to begin address input.

step 3 Input the house number using the number keys.

Tip - For security reasons, use a point close to your home instead of your actual home address.

step 4 Touch and input the street name using the letter keys. Touch options.

to see all of the available step 5 Touch or select from a previously registered city.

step 6 Touch the desired city.

11

412033M1.indd 9 12/20/07 5:24:02 PM

412033M1.indd 8

REGISTER HOME

step 7 If necessary use the arrow keys to adjust the position on the map. Touch position.

to confi rm the step 8 Touch at the top left of the screen to change the home icon.

step 9 Touch the desired icon for your home.

step 10 Touch at the bottom of the screen. Press the panel button to complete the registration of your home.

12

12/20/07 5:24:01 PM

BLUETOOTH TELEPHONE PAIRING

panel button and step 1 Press the touch to pair the Bluetooth devices. step 2 Touch .

step 3

Touch .

step 4 Touch to pair the Bluetooth equipped cell phone.

step

13

5 In the approved Bluetooth cell phone, input the passkey listed on the screen. Please refer to the cell phone manufacturer’s owner’s manual for pairing procedures.

step 6 Upon connection, the system will indicate that the pairing process was successful.

Quick Tip - Verify the Bluetooth cell phone has been approved by visiting www.Toyota.Letstalk.com.

Quick Tip - Verify that the Bluetooth feature has been switched ON and visible to other Bluetooth devices.

412033M1.indd 7 12/20/07 5:24:01 PM

412033M1.indd 6

CALLING BY VOICE RECOGNITION

step 1 Press the voice command button on the steering wheel and wait for the beep. After the beep say, “Dial by number.” step 2 Press the voice command button on the steering wheel and wait for the beep. After the beep say, “Eight, zero, zero, fi ve, fi ve, fi ve, one, two, one, two.” Say the numbers individually and at a moderate speed.

step 3 Press the voice command button on the steering wheel and wait for the beep. After the beep say,

“Dial.” If the incorrect number has been inputted or if you wish not to complete the call, touch .

step 4 The call is active after changes to .

Some Bluetooth equipped cell phones may or may not show battery or signal strength on the display.

Touch the Mute icon to mute the conversation.

When muted the yellow indicator above the icon will appear. Touch the Mute icon to unmute the active call.

Touch the Transfer Call icon to transfer the active call to the paired cell phone for a private conversation.

step 5

To end the call touch .

Quick Tip - A noisy environment may prevent the voice recognition system from understanding your commands. It is recommended that you reduce background noise (including passenger conversation and wind noise) prior to using the Voice Recognition system.

Quick Tip - Speak clearly and at a moderate speed after the beep sound has played.

14

12/20/07 5:23:50 PM

ADDITIONAL NAVIGATION FEATURES

SEARCH AREA

Prior to inputting the desired address select the appropriate Search Area by pressing . If the incorrect Search Area is chosen, the system will either fi nd an address that closely matches in that area or will indicate that the address cannot be found.

ROUTE PREFERENCES

Select the appropriate Search Area, then touch OK to confi rm the selection.

3 ROUTES

Once the address has been inputted, select the desired route preference(s) for the trip. For example, if Allow Toll Roads is not selected, the system will route over non-toll roads which may take longer to reach the destination.

SCREEN PREFERENCES

Touch to select from seven different screen viewing options. Three screen preferences are available when the map is visible and four additional are available during route guidance only. Please refer to the list of screen preferences located below.

15

One of the three routes may be chosen for the trip.

Quick 1 offers the shortest route by time; Quick 2 is the second fastest route. Short is the most direct route based upon driven mileage.

* The system does not account for traffi c signals or

traffi c fl ow.

Single Map

Mode

Dual Map

Mode

*Arrow

Guidance

Mode

*Freeway Exit

Info Mode

Compass

Mode

*Intersection

Guidance

Mode

*Turn List

Mode

* Selections available

when in guidance

mode.

412033M1.indd 5 12/20/07 5:23:49 PM

412033M1.indd 4

BEEP SETTING

ADDITIONAL NAVIGATION FEATURES

VOLUME SETTING

PRESS INFO > BEEP OFF

Switch off the confi rmation tone by touching

at the top of the screen. When the yellow bar appears this feature has been disabled.

KEYBOARD SETTING

PRESS MENU > VOLUME

The Volume feature allows for the adjustment of the voice guidance commands. Touch the desired volume level and touch OK to confi rm your selection.

SCREEN TRANSITION

PRESS MENU > SETUP

Set the layout of the keyboard as alphabetical or standard QWERTY keyboard. Touch OK to confi rm your selection.

PRESS INFO > SCREEN SETTING

Touch OFF to prevent the system from reverting to the map display. Once the screen transition is switched off, the audio or climate control screen

(if equipped) will remain without reverting to the map display. Touch OK to confi rm your selection.

FREEWAY EXIT INFO MODE

During Route Guidance on a Freeway or Toll Road, a variety of points of interest such as Gas Stations,

Restaurants or Hotels can be viewed during your trip.

To access this feature, select Freeway Exit Info Mode from the Screen Preferences. Upcoming freeway exits will be listed by the number or name along with the POIs in the vicinity of the exit ramp. Select the desired exit from the list to see the POIs at that particular exit.

* This feature is only available while in Route Guidance and travelling on a freeway or Toll Road.

16

12/20/07 5:23:48 PM

ADDITIONAL NAVIGATION FEATURES

ESTIMATED DISTANCE AND TIME*

The navigation system will provide an estimate of the distance and time to the destination based upon the suggested route during guidance. The system automatically calculates the remaining miles until you arrive at the destination. Based upon the distance traveled, the system will also provide an estimated time until arriving at your destination.

The system can be customized to match your driving habits. To adjust the speed for residential, main streets or freeways please refer to the Navigation Owner’s Manual for a complete description of this feature.

* The system does not account for traffi c

signals or traffi c fl ow.

OPERATION OF YOUR VEHICLE EMERGENCY SCREEN:

Press the plate. Touch

button on the navigation face

which will provide four different choices: • Police Stn. • Hospital • Dealer • Fire Stn.

Touch to select the desired destination.

Once selected, the system will provide a list of locations sorted by distance. If the vehicle is in motion, the system will route you to the nearest location automatically.

17

412033M1.indd 3 12/20/07 5:23:47 PM