Toyota 2016 Camry Quick Reference Guide

Toyota 2016 Camry Quick Reference Guide
CAMRY
2 0 1 6
QUICK REFERENCE GUIDE
2016
Camry
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental operations
so you can locate and use the vehicle’s main equipment quickly
and easily.
The Quick Reference Guide is not intended as a substitute for the
Owner’s Manual located in your vehicle’s glove box. We strongly
encourage you to review the Owner’s Manual and supplementary
manuals so you will have a better understanding of your vehicle’s
capabilities and limitations.
Your dealership and the entire staff of Toyota Motor Sales, U.S.A.,
Inc. wish you many years of satisfied driving in your new Camry.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of
Camry operations. Every Camry owner should review the Owner’s
Manual that accompanies this vehicle.
Pay special attention to the boxed information highlighted in
color throughout the Owner’s Manual. Each box contains safe
operating instructions to help you avoid injury or equipment
malfunction.
All information in this Quick Reference Guide is current at the
time of printing. Toyota reserves the right to make changes at
any time without notice.
INDEX
OVERVIEW
9
8
9
4-5
4
2-3
6
8
7
Door locks
Doors-Child safety locks
Floor mat installation
Safety Connect
Seat belts
Seat belts-Shoulder belt anchor
Spare tire & tools
Star Safety SystemTM
Trunk internal release
26
26
30
27
26
27
28
29-30
27
OVERVIEW
Engine maintenance
Fuel tank door release and cap
Hood release
Indicator symbols
Instrument cluster
Instrument panel
Keyless entry1,2
Light control-Instrument panel
Smart Key system1,2
SAFETY AND EMERGENCY FEATURES
FEATURES/OPERATIONS
FEATURES/OPERATIONS
Air Conditioning/Heating
19-20
Audio
22
Auto lock/unlock1,2
10
Automatic Transmission
10
Bluetooth® Device Pairing Section 33-42
Bottle holders/Cup holders
24
Blind Spot Monitor (BSM)
18
Clock
19
Cruise control
16
Dynamic radar cruise control
17
Garage door opener (HomeLink®)3 16
Lights1 & turn signals
15
Lane Departure Alert (LDA)
25
Moon roof
12
Multi-Information Display1
24
Parking brake
11
Power outlets-12V DC
14
Pre-Collision System (PCS)
25
Rear view monitor system
18
Seat adjustments-Front
13
Seat adjustments-Rear
13
Seat heaters
19
Seats-Head restraints
12
Steering lock release
11
Steering wheel switches and
Telephone controls (Bluetooth®)
21
Tilt and telescopic steering wheel 11
USB/AUX port
23
Windows-Power
12
Windshield wipers & washers
14
Wireless Charging
23
2
1
SAFETY AND EMERGENCY FEATURES
Visit your Toyota dealer for information on customizing this feature.
Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
3
HomeLink® is a registered trademark of Gentex Corporation.
1
OVERVIEW
Instrument panel
Steering wheel controls
Automatic Air Conditioning
Steering wheel audio controls2
Paddle shift levers1
Meter control switches
Telephone controls2
Voice command button2
Vehicle-to-vehicle distance button1
Cruise control
Air Conditioning controls
Outside rearview mirror/Rear window defogger button
Headlight and turn signal controls/Headlight, turn signal and front DRL
(Daytime Running Light)1 controls
Wiper and washer controls
“ENGINE START STOP” button (Smart Key)1
Audio system1/Navigation system1,2
Emergency flasher button
Tire pressure warning reset switch1
2
Manual Air Conditioning
OVERVIEW
FEATURES/OPERATIONS
1
If equipped
For details, refer to the “Navigation System Owner’s Manual” and “2016
Entune™ Audio Quick Reference Guide.”
2
3
SAFETY AND EMERGENCY FEATURES
Seat heater controls1
Key ignition1
Tilt and telescopic steering lock release
Pre-Collison System (PCS) switch1
Lane Departure Alert (LDA) switch1
VSC OFF switch
Blind Spot Monitor (BSM) main switch1
OVERVIEW
Instrument cluster
Service indicators and reminders
Tachometer
Outside temperature display
Speedometer
Display change button
Fuel gauge
Odometer/Trip meter
Multi-information display
Shift position/Shift range display
Engine coolant temperature display
Instrument panel light control button
Indicator symbols
For details, refer to “Indicators and warning lights,” Section 2-2, 2016 Owner’s
Manual.
Brake system warning1
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Pre-collison system warning1,2
Electric power steering system warning1
Master system warning1
Malfunction/Check Engine indicator1
Low fuel level warning
SRS airbag warning1
1
If indicator does not come on or does not turn off within a few seconds of starting engine, there
may be a malfunction. Have vehicle inspected by your Toyota dealer.
4
Low Tire Pressure Warning1,2
Theft deterrent/Engine immobilizer system indicator
OVERVIEW
Anti-lock Brake System warning1
Headlight low/high beam indicator
Automatic high beam indicator
2
Turn signal indicator
Slip indicator1
Vehicle Stability Control OFF indicator1
Cruise control indicator/Cruise control SET indicator3
Dynamic radar cruise control indicator/
Dynamic radar cruise control SET indicator2,4
Passenger Air Bag ON/OFF indicator1
Low outside temperature indicator
Eco Driving indicator1
FEATURES/OPERATIONS
Land Departure Alert (LDA) warning2
Arrow direction indicates fuel tank door position
3
4
SAFETY AND EMERGENCY FEATURES
2
If equipped.
If this light flashes, refer to “Cruise control,” Section 4-5, 2016 Owner’s Manual.
If this light flashes, refer to “Dynamic Radar Cruise control,” Section 4-5, 2016 Owner’s Manual.
5
OVERVIEW
Keyless entry (if equipped)
Locking operation
Type A
Type C
Type B
Push
Unlocking operation
Type A
Type B
Type C
Push ONCE: Driver door
TWICE: All doors
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for
safety.
Trunk lid
Type A
Type B
Type C
Push and hold
Panic button
Push and hold
6
Smart Key system (if equipped)
Start function
OVERVIEW
NOTE: Gear shift lever must be in Park and brake pedal depressed.
Power (without starting engine)
Without depressing the brake pedal, pressing the “ENGINE START STOP” switch
will change the operation mode in succession from:
ACC
OFF
Power ON; the engine not running.
All systems OFF.
Locking operation
Unlocking operation
Front door unlock*
Front door lock
FEATURES/OPERATIONS
ON
Accessories such as the radio will operate.
Grasp
Touch
Carry remote to lock
Carry remote to unlock
Trunk lock/unlock
Carry remote to lock/unlock
* Driver door unlocking function can be programmed to unlock driver door only, or
all doors. Grasping front passenger door handle will unlock all doors.
NOTE: Doors may also be locked/unlocked using remote.
7
SAFETY AND EMERGENCY FEATURES
Push
OVERVIEW
Fuel tank door release and cap
Pull up
Store
Turn to open
Turn to close
NOTE: Tighten until one click is heard. If the cap is not tightened enough,
Check Engine “ ” indicator may illuminate.
Light control-Instrument panel
Brightness control
8
Hood release
OVERVIEW
Pull
Pull up latch and raise hood
Engine maintenance
4 cylinder (2AR-FE) engine
V6 (2GR-FE) engine
FEATURES/OPERATIONS
Engine oil filler cap
Engine oil level dipstick
Engine coolant reservoir
Windshield washer fluid tank
9
SAFETY AND EMERGENCY FEATURES
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer
to the “Warranty Maintenance Guide.”
FEATURES/OPERATIONS
Auto lock/unlock
Automatic door locks can be programmed to operate in four different modes, or
turned OFF.
-Doors lock when shifting from Park.
-Doors lock when the vehicle speed goes above approximately 12 mph.
-Doors unlock when shifting into Park.
Vehicles without Smart Key system
-Doors unlock when the ignition switch is set from “ON” to “ACC” or “LOCK” and
driver’s door is opened.
Vehicles with Smart Key system
-Doors unlock when the “ENGINE START STOP” switch is set to OFF and driver’s
door is opened.
Refer to the Owner’s Manual for more details.
Automatic Transmission
Shift lever
+ (“S” mode)
Park*
Reverse
- (“S” mode)
Neutral
Drive
“S” mode
N
Paddle shift switches
(if equipped)
- (“S” mode)
+ (“S” mode)
* The “ENGINE START STOP”/ignition switch must be “ON” and the brake pedal
depressed to shift from Park.
“S” (Sequential) mode
Shift the shift lever to “S” position from “D” position.
+: Upshifting
-: Downshifting
Downshifting increases power going uphill, or provides engine braking downhill.
For best fuel economy during normal driving conditions, always drive with the shift
lever in the “D” position.
10
Steering lock release
Smart Key system
Without Smart Key system
Turn
OVERVIEW
Turn
Push
Tilt and telescopic steering wheel
Angle
FEATURES/OPERATIONS
Length
Lock release lever
Hold wheel, push lever down, set angle and length, and return lever.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Parking brake
11
SAFETY AND EMERGENCY FEATURES
Set: Depress
Release: Depress again
FEATURES/OPERATIONS
Windows-Power
Driver side
Window lock switch
Up
Down
Automatic operation (driver’s and passenger’s side) Push the switch completely
down or pull it completely up and release to fully open or close. To stop the
window partway, operate the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
Moon roof (if equipped)
Sliding operation
Tilting operation
Push once to open partway;
again to open completely.
Close
Tilt
Open
Close
Recommended driving position
to minimize wind noise.
Push once to open; moon roof will automatically stop at the recommended
position. Push again to open completely.
Seats-Head restraints
Lock release button
12
Seat adjustments-Front
Power seat*
OVERVIEW
Seat position (forward/backward)
Seatback angle
Height crank (driver side only)
Seat position, cushion angle (driver side only) and height (driver side only)
Lumbar support (driver side only)
* Power passenger seat equipped on some models, see Owner’s Manual for more details.
(1)
Pull
(2)
(3)
Tip: To fold rear seats, the
release button is located in
the trunk.
Refer to the Owner’s Manual for more details.
13
Fold down
SAFETY AND EMERGENCY FEATURES
Pull
FEATURES/OPERATIONS
Seat adjustments-Rear
FEATURES/OPERATIONS
Windshield wipers & washers
Mist
Adjust frequency*
Interval wipe
Slow
Pull to wash and wipe
Fast
* Intermittent windshield wiper frequency adjustment
Rotate to increase/decrease wipe frequency.
Power outlets-12V DC
Front console
Center console
The “ENGINE START STOP” switch/ignition switch must be in the “ACC” or “ON”
position for use.
14
Lights & turn signals
Headlights
OVERVIEW
Headlights
Parking lights
DRL OFF
Low beam
High beam
flasher
High beam
Turn signals
FEATURES/OPERATIONS
-Daytime Running Light system (DRL) Automatically turns on the headlights at a
reduced intensity.
-Automatic light cut off system Automatically turns lights off after 30-second
delay, or lock switch on remote may be pushed after locking.
Right turn
Lane change1
Lane change2
Left turn
2
The right hand signals will flash three times.
The left hand signals will flash three times.
15
SAFETY AND EMERGENCY FEATURES
1
FEATURES/OPERATIONS
Garage door opener (HomeLink®)*
(if equipped)
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
Refer to “Garage door opener,” Section 6-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink® is a registered trademark of Gentex Corporation.
Cruise control (if equipped)
Functions
Turning system ON/OFF
Indicator
Resume2/Increase speed
Cancel1
Set/Decrease speed
System ON/OFF
1
2
The set speed may also be cancelled by depressing the brake pedal.
The set speed may be resumed once vehicle speed reaches 25 mph.
16
Dynamic radar cruise control
(if equipped)
Switch to fixed speed mode
(2) Push and hold
OVERVIEW
Refer to the Owner’s Manual for more details and complete safety precautions
before attempting to use “Dynamic radar cruise control.”
Indicator
(1) Push
System ON/OFF
To set, cancel and resume a speed Refer to “Summary of Functions” in the
Cruise Control section, and to the Owner’s Manual for more details.
Distance control mode
Indicator
FEATURES/OPERATIONS
Push
System ON/OFF
The distance control mode will cruise at a set speed, decelerate to maintain a
selected distance from a slower vehicle traveling in front of you, and accelerate
back up to the selected speed if the vehicle in front changes lanes or speeds up.
To set, cancel and resume a speed Refer to “Summary of Functions” in the
Cruise Control section, and your Owner’s Manual for more details.
NOTE: Once vehicle speed is set, pushing lever up toward “+ RES” will increase
speed to the nearest 5 mph, and then in 5 mph increments. Pushing lever down
toward “- SET” will reduce speed in the same way.
SHORT
Push
To change the vehicle-to-vehicle distance
Push the distance button to cycle through the settings, which will change
progressively from LONG to MIDDLE to SHORT.
17
SAFETY AND EMERGENCY FEATURES
MIDDLE
LONG
FEATURES/OPERATIONS
Blind Spot Monitor (BSM)(if equipped)
Rear Cross Traffic Alert buzzer
System ON/OFF
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in decision-making when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The Blind Spot Monitor function uses radar sensors to detect vehicles that are
traveling in an adjacent lane in the area that is not reflected in the outside rear
view mirror (the blind spot), and advises the driver of the vehicles existence via
the outside rear view mirror indicator.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper
of the rear area of the vehicle. The camera for the rear view monitor system is
located above the license plate.
To adjust the image on the rear view monitor screen, press the “SETUP” button
and select “Display” on the “Setup” screen. Select “Camera” to adjust the
screen contrast and brightness.
Refer to the Owner‘s Manual for more details on this system.
18
Clock
OVERVIEW
To find your system, refer to page 22 of this guide,
For Entune™ Audio
Push “SETUP” button next to the screen
then select “General” in the touch screen to access clock setting.
For Entune™ Audio Plus and Entune™ Premium Audio
Push “APPS” button next to the screen
then select “General” in the touch screen to access clock setting.
Air Conditioning/Heating
FEATURES/OPERATIONS
Automatic Air Conditioning*
19
SAFETY AND EMERGENCY FEATURES
Automatic climate control ON
Adjusting the temperature setting will cause the airflow vents, air intake and
fan to adjust automatically.
Temperature selector (driver side)
Temperature selector (passenger side)
“SYNC” button
Indicator ON: Synchronized temperature settings for driver and passengers.
Indicator OFF: Separate temperature settings for driver and passengers.
Air Conditioning ON/OFF
Recirculate cabin air (outside air when OFF)
Airflow vent mode
In “
” or “
” mode, use outside air (“
” indicator OFF) to reduce
window fogging.
Fan speed
Outside rearview mirror/Rear defogger
Windshield airflow/defogger
*if equipped
Climate control OFF
FEATURES/OPERATIONS
Manual Air Conditioning*
Fan speed
Recirculate cabin air (outside air when OFF)
Windshield airflow/defogger
Outside rearview mirror defoggers/Rear defogger
Air Conditioning ON/OFF
Use outside air to quickly cool interior, then change to recirculate for cooler air.
Select for maximum cooling. Air intake will automatically be set to recirculate.
It is not possible to change intake to outside, or to turn A/C OFF in this mode.
Temperature selector
Airflow vent
In “
” mode, use outside air (“
” indicator OFF) to reduce window
fogging. “
” mode uses outside air only.
*if equipped
Seat heaters (if equipped)
Front passenger seat
Driver seat
20
Steering wheel switches
and telephone controls (Bluetooth®)
OVERVIEW
Start call
End call
Volume
>
FEATURES/OPERATIONS
>
“
” Use to search within the selected audio medium
(radio, CD, etc.).
“MODE” Push to turn audio ON and select an audio mode. Push and hold to
turn the audio OFF.
Microphone
Refer to “Bluetooth® audio/phone,” Section 5-7,8 in the Owner’s Manual, for more
information about phone connections and compatibility.
Refer to “Bluetooth® device pairing section” at the end of this booklet, to connect
your smart phone to the Entune™ touch screen system.
21
SAFETY AND EMERGENCY FEATURES
Bluetooth® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the compatible telephone and the
system.
FEATURES/OPERATIONS
Audio
Type 1 - Entune™ Audio
Eject CD
Touch screen display
Turn to
tune radio
stations
manually
or select
tracks or
files
Push to turn
ON/OFF
to display
1 Push
audio screen
Seek station/
CD track select
Push to display
telephone option
screen
Type 2 - Entune™ Audio Plus with Connected Navigation App Suite
1
2a
3
Type 3 - Entune™ Premium (JBL®) Audio with Integrated Navigation and App Suite
Some XLE and XSE models may be equipped with the JBL upgrade in this unit.
1
2b
Map card
insert1
Access to
3 navigation
system1
1
Refer to the “Navigation System Owner’s Manual” and “2016 Entune™ Audio Quick
Reference Guide.”
1
AUDIO Button
Access to audio functions.
3
2a APPS Button
Access to trafÀc and weather
2b APPS Button
Access to Entune® App Suite, sports,
stocks, news, trafÀc and weather
22
HOME Button
Access to Home screen.
HOME SCREEN - the home screen
offers a two panel and a three panel
layout. Information and layout will
vary depending on selected set up.
USB/AUX port
OVERVIEW
Open lid
By connecting a USB-compatible portable audio device or USB memory to the
USB port, you can listen to music from the portable audio device or USB memory
through the vehicle’s speaker system.
By inserting a mini plug into the AUX port, you can listen to music from a portable
audio device through the vehicle’s speaker system while in AUX mode.
Wireless Charging (if equipped)
FEATURES/OPERATIONS
Push
A mobile device can be charged wirelessly on the tray. Open the lid and press
the wireless charger switch. Place a mobile device on the tray as shown in the
illustration. An amber indicator is illuminated while charging is in progress. When
charging is complete, a green indicator will also be illuminated. Some phones,
cases or cover type wireless chargers may not cause the green indicator to
illuminate even though it is fully charged.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
SAFETY AND EMERGENCY FEATURES
23
FEATURES/OPERATIONS
Bottle holders/Cup holders
Front
Rear
Multi-Information display
Push “meter control switches” to change information in the following:
(1) Drive information
(2) Navigation system linked display
(3) Audio system linked display
(4) Dynamic radar cruise control*
(5) LDA (Lane Departure Alert) status*
(6) Warning messages
(7) Settings display
(8) Tire pressure monitoring (warning) system*
* If equipped
24
Pre-Collision System (PCS) (if equipped)
OVERVIEW
When a high possibility of a frontal collision is detected by the radar sensor, a
buzzer sounds and a message urging the driver to take evasive action appears
on the multi-information display. If the driver then applies brakes, the system
applies greater brake force in relation to how strongly the brake pedal is
depressed. If the system determines that a collision is unavoidable, the brakes
are automatically applied to reduce the collision speed.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
25
SAFETY AND EMERGENCY FEATURES
The Lane Departure Alert recognizes the visible lane markers using a camera as a
sensor and alerts the driver with beeping and flashing indicators when the vehicle
deviates from its lane. Press the LDA switch to activate the system.
FEATURES/OPERATIONS
Lane Departure Alert (LDA) (if equipped)
SAFETY AND EMERGENCY FEATURES
Door locks
Lock
Unlock
Doors-Child safety locks
Rear door
Moving the lever to downward will allow the door to be opened only from the
outside.
Seat belts
Take up slack
Too high
Keep as low on
hips as possible
NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly,
the Automatic locking retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
26
Seat belts-Shoulder belt anchor
OVERVIEW
Push up, or squeeze
lock release to lower
Safety Connect (if equipped)
Microphone
LED Indicators
“SOS” button
FEATURES/OPERATIONS
Safety Connect is a subscription-based telematics service that uses Global
Positioning System (GPS) data and embedded cellular technology to provide safety
and security features to subscribers. Safety Connect is supported by Toyota’s
designated response center, which operates 24 hours per day, 7 days per week.
Services for subscribers include: Automatic collision notification, Stolen vehicle
location, Emergency assistance button and Enhanced roadside assistance
Contact your dealer for more information about Safety Connect.
Trunk-Internal release
Pull up
SAFETY AND EMERGENCY FEATURES
27
SAFETY AND EMERGENCY FEATURES
Spare tire & tools
Tool location
Jack
Jack handle
Luggage floor cover
Wheel nut wrench
Spare tire
Removing the spare tire
(1) Remove the tool tray.
(2) Loosen the center fastener that
secures the spare tire.
Refer to the Owner’s Manual for tire changing and jack positioning procedures.
28
Star Safety SystemTM
OVERVIEW
All new Toyota vehicles come standard with the Star Safety SystemTM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), Anti-lock
Braking System (ABS), Electronic Brake-force Distribution (EBD), Brake Assist (BA)
and Smart Stop Technology (SST).
Vehicle Stability Control (VSC)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
Traction Control (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
surfaces by applying brake force to the spinning wheel(s).
Anti-Lock Brake System (ABS)
ABS helps prevent brakes from locking up by “pulsing” brake pressure to each
wheel. This limits brake lockup and helps provide directional control for the
current road conditions.
FEATURES/OPERATIONS
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
Electronic Brake Force Distribution (EBD)
Brake Assist (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a
split second to react, Brake Assist can add additional brake pressure more quickly
than just the driver alone can.
29
SAFETY AND EMERGENCY FEATURES
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. Abrupt stops can cause a vehicle
to tilt forward, reducing the braking power of the rear wheels. EBD responds to
sudden stops by redistributing brake force to enhance the braking effectiveness of
all four wheels.
SAFETY AND EMERGENCY FEATURES
Smart Stop Technology (SST)
Smart Stop Technology automatically reduces driving torque when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
• Install floor mats right side up.
Always align the ¨ marks
30
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
31
32
BLUETOOTH® DEVICE PAIRING
SECTION
33
BLUETOOTH® DEVICE PAIRING
To begin the Bluetooth® Pairing process, press the HOME button on the
faceplate of your Toyota Vehicle Entune™ Multimedia Head Unit.1
Bluetooth® Pairing for Android® phone
and Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Android mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.2
Initiate Bluetooth® on your Android®
STEP 1
From your APPS
SCREEN, select
SETTINGS
STEP 2
Select
CONNECTIONS and
select BLUETOOTH
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Select YOUR PHONE
DEVICE to make it
discoverable.
Phone will seek out
Bluetooth devices while
remaining discoverable.
STEP 5
While your Android device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
1 To determine which head unit is installed in your vehicle, refer to the Audio section in this guide.
2 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of
device and Android OS version.
34
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need
to initiate Bluetooth on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle
Entune Multimedia Head Unit,
Select SETUP BUTTON on the
Home Screen.
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
Select ADD, to add your
phone device
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
35
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
STEP 12
STEP 13
Using your smartphone, you
will need to allow Entune
access to your messaging
and contacts
A confirmation will
appear once your phone
has been paired and
connected.
It is recommended to check the
“Don’t ask again” box, so as not
to have to press OK every time the
phone makes a Bluetooth connection
with your Toyota
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it
will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on
software, coverage & carrier.
3. Android is a trademark of Google Inc.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you
are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
36
Bluetooth® Pairing for iPhone® and
Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all iPhone mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.
Initiate Bluetooth® on your iPhone®
STEP 1
From the HOME
SCREEN, select
SETTINGS
STEP 2
Select BLUETOOTH
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Your iPhone will seek
out Bluetooth devices
while remaining
discoverable
STEP 5
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
CONTINUE ON THE NEXT PAGE...
37
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need
to initiate Bluetooth on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
STEP 6
Select SETUP BUTTON on the
Home Screen.
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 7
Select BLUETOOTH
STEP 10
STEP 8
Select ADD, to add your
phone device
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
38
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
STEP 12
STEP 13
Using your smartphone, you may need to
allow Entune access to your messaging
and contacts
A confirmation will
appear once your phone
has been paired and
connected.
Only current iPhone text messages can be viewed on
the head unit. iPhone does not allow text message
reply.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it
will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on
software, coverage & carrier.
3. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you
are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
39
BLUETOOTH® DEVICE PAIRING
Bluetooth® Pairing for Windows Phone®
and Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Windows Phone mobile digital devices have Bluetooth integrated; all you
have to do is setup the phone and multimedia system to “talk” to each other and
form a connection.
Initiate Bluetooth® on your Windows Phone®
STEP 1
From your APP LIST,
select SETTINGS
STEP 2
Select BLUETOOTH
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Phone will seek out
Bluetooth devices
while remaining
discoverable
STEP 5
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
40
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth® enabled on your phone and ready to pair, you will need
to initiate Bluetooth® on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
STEP 6
On your Toyota Vehicle
Entune Multimedia Head Unit,
Select SETUP BUTTON on the
Home Screen.
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
Select ADD, to add your
phone device
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
41
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
STEP 12
STEP 13
Using your smartphone,
you may need to allow
Entune access to your
contacts
A confirmation will
appear that your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it
will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on
software, coverage & carrier.
3. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you
are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
42
NOTES
43
NOTES
44
NOTES
45
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
Printed in U.S.A. 8/15
15-TCS-08575
00505QRG16CAM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement