Candy Aqua 1042D1 4KG 1000 Spin Washing Machine is a compact and efficient washing machine designed for households. With a 4kg capacity, it's ideal for smaller loads, and its 1000 spin speed ensures efficient water removal. Explore various program options like cotton, synthetics, delicates, and a special wool/hand wash program. Features like Allergy Care and Cold Wash allow for tailored washing experiences. The machine is designed with safety features like a door lock and a filter for cleaning to ensure a smooth and reliable operation.
Advertisement
Advertisement
–
P
This appliances is intended to be used in household and similar applications such as: w
environments;
Farm houses;
T s
- f
Introduction his appliances is intended to be used in household and milar applications such as:
A different use of this appliance from household environment or from typical housekeeping fu
By clients in hotels, motels and other residential type
environments;
Bed and breakfast type environments.
A different use of this appliance from household environment or from typical housekeeping functions, as commercial use by expert or trained users, is excluded even in the above applications.
If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturer’s warranty. Any damage to the appliance or other damage or loss arising through use that is not consistent with domestic or household use (even if located in a domestic or household environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.
ces and other working
–
If
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
A capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the co en appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
–
N
A th
– otes on disposal the appliance.
Children of less than 3 years should be kept away unless continuously supervised.
– Your supplier or local council will be able to give you details of current means of disposal.
ed persons in
–
–
Water pressure must be between 0,05 MPa and 0,8 MPa.
Note: pull out the mains plug from any old appliance.
Cut the power cable and dispose of it, together with the
– plug.
the programmes control/knob in the vertical position. Any other
W in different position of such control sets the machine in ON condition
(only for models with programmes knob).
2
–
–
I n rt
After installation, the appliance must be positioned so that the plug is accessible.
C o n t e n t s used (see control panel).
o d u c e n e r a it o
l d e n il v e r y n o t e s
P a
2 g e
che please refer to the manufacturer f e t y n o t e 4
5 e r o
Before cleaning or maintaining the washing machine, unplug the appliance and turn off the water faucet.
1 2 r o g r a m m e s e l e c t o r 1 e t e r g e n t d r a w e 1 7
D
–
U t e e r f u g e n t s
l a d v i
, w c e a s f o r h i n g t h e a i d s a n d a m o u s e r u n t s t o u s e 1
2
8
Please do not use converters, multiple sockets or extension cords.
T h e e m a i a i n n w w a a s s h h
C e l a a n i n i n n g g a a n n d d r r o o u u it n it n e e m a a i i n n t t e e n n a a n n c c e e
2 2 1 1
WARNING: water may reach very high temperatures during
2 3 3
I I n v v e e s s it g it g a a it it n n g g m a a fl fl u u n n c c it it o o n n s s 2 5 5
– c h n i c a l d a t a porthole.
28
– Do not pull on the power cord or appliance to unplug the machine.
– Do not expose the washing machine to rain, direct sunlight or other weather elements.
–
–
BEFORE SWITCHING ON THE APPLIANCE MAKE SURE
IT IS CORRECTLY INSTALLED AND THAT THE FIXING trolley. We recommend two people lift the washing machine.
SCREWS ARE REMOVED AS SHOWN IN PAGE 28.
In the event of fault and/or malfunction, turn off the washing machine, close the water faucet and do not tamper with the appliance. Immediately contact the Customer Service Centre and only use original spare parts. Failure to observe these instruction may jeopardise appliance safety.
By placing the mark on this product, we are con fi rming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.
3
C o n t e n t s
General safety rules
G e n e r a l d e il v e r y n o t e s
Quick start
D e s c ir p it o n o f c o n t r o l s
P r o g r a m m e T a b l e
P r o g r a m m e s e l e c t o r
D e t e r g e n t d r a w e r
D e t e r g e n t s , w a s h i n g a i d s a n d a m o u n t s t o u s e
U s e f u l a d v i c e f o r t h e u s e r
T h e m a i n w a s h
C l e a n i n g a n d r o u it n e m a i n t e n a n c e
I n v e s it g a it n g m a fl u n c it o n s
T e c h n i c a l d a t a
Setting up + installation
P a g e
1 2
1 4
1 6
1 7
5
6
2
5
1 9
2 0
2 2
2 4
2 6
27
BEFORE SWITCHING ON THE APPLIANCE MAKE SURE
IT IS CORRECTLY INSTALLED AND THAT THE FIXING
SCREWS ARE REMOVED AS SHOWN IN PAGE 27.
Please read these instructions for use carefully and all other information enclosed with the washing machine.
Keep all documentation in a safe place for future reference or for any future owners.
4
General delivery notes
Please check that the following items are delivered with the appliance:
- Instruction manual
- Certificate of guarantee
- Inlet hose
Check that no damage has occurred during transit, and if so, call your nearest Authorised
Technical Support Service agent.
Quick start
Washing
- Open the door by using the handle “A” (Fig. 1, page 6)
- Select laundry and put it in the machine
- Close the door
- Put detergent in the compartments as indicated in the programme guide in this instruction manual
- The display will show the settings for the programme selected.
Press additional function buttons (if required)
- Press the “Start/Pause” button (page 7)
- The programme starts.
After washing
- The word “End” will appear on the display.
- Wait for the door lock to be released
(about 2 minutes after the programme has finished).
The “Door Security” indicator light will go out.
- Switch off the washing machine by turning the selector to “OFF” position.
- Open the door and remove the laundry.
Ensure that the machine is correctly installed in line with the instructions found on page 27.
5
Description of controls
C B F H G M D N
P
M E
A
D o o r h a n d l e
Programme Start li
D
S o t ll o e r r r h g a y C a " b u t t t t o o n n t/Pause" button w a s h " b u g h t r t/Pause" button
Programme Start li g h t
" A r e
" S
" t a
C o l d
" l y y
S
C a a r r t "
"Spin Selecti
"
A e ll e
C o a a r g y l d w a s h "
Digital Di l e a o
" y
"Spin Selecti o b b b u u t t t o n " t t b u t u n " t t o n
Buttons indicator li
Digital Di t s p l t u g t n t t o n o n
D e t e r g e n t d g h t s
Programme selector with "OFF" position
D e t e r g e n t d r a w e r
A
D
E
G
F
H
G
M
N
B
A
C
B
D
C
E
N
P
6
Door handle
Press the finger-bar inside the door handle to open the door.
Programme Start light
This lights up when the START button has been pressed.
A
B
“START/PAUSE” button
Press to start the selected cycle .
C
NOTE: When the "Start/Pause" button has been pressed, the appliance can take few seconds before it starts working.
Changing the settings after the programmes has started (PAUSE)
Press and hold the "Start/Pause" button for about 2 seconds, the flashing lights on the options buttons and time remaining indicator will show that the machine has been paused, adjust as required and press the "Start/Pause" button again to cancel the flashing lights.
If you wish to add or remove items during washing, wait 2 minutes until the safety device unlocks the door.
When you have carried out the manoeuvre, close the door, press "Start/Pause" button and the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, set the selector to the "OFF" position.
Select a different programme.
Re-set the programme selector to the "OFF" position.
7
The option buttons should be selected before pressing the "Start/Pause" button.
“ALLERGY CARE” button
D
By pressing this button you can activate a special new wash cycle in the Cotton and Mixed
Fabrics programs, thanks to the new Sensor System. This option treats with care the fibres of garments and the delicate skin of those who wear them.
The load is washed in a much larger quantity of water and this, together with the new combined action of the drum rotation cycles, where water is filled and emptied, will give you garments which have been cleaned and rinsed to perfection. The amount of water in the wash is increased so that the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also increased during the rinse procedure so as to remove all traces of detergent from the fibres. This function has been specifically designed for people with delicate and sensitive skin, for whom even a very small amount of detergent can cause irritation or allergy.
You are advised to also use this function for children’s clothing and for delicate fabrics in general, or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of detergent. To ensure the best performance for your wash, this function is always activated on the
Delicates and Woollens/Hand wash programs.
“COLD WASH” button E
By pressing this button it is possible to transform every programme into a cold washing one, without modifying other characteristics (water level, times, rythmes, etc...).
Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely washed thanks to this new device.
8
“DELAY START” button F
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours.
To delay the start use the following procedure:
Set the required programme.
Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour delay (h01 appears on the display); the pre-set delay increases by 1 hour each time the button is pressed, until h24 appears on the display, at which point pressing the button again will reset the delay start to zero.
Confirm by pressing the "Start/Pause" button (the light on the display starts to flash). The countdown will begin and when it has finished the programme will start automatically.
It is possible to cancel the delay start by taking the following action:
Press and hold the button for 5 seconds until the display will show the settings for the programme selected.
At this stage it is possible to start the programme previously selected by pressing the
"Start/Pause" button or to cancel the process by setting the selector to the "OFF" position and then selecting another programme.
Warning: If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left off.
“SPIN SELECTION” button
G
The spin cycle is very important to remove as much water as possible from the laundry without damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.
By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle can be cancelled.
To reactivate the spin cycle press the button until you reach the spin speed you would like to set.
To prevent damage to the fabrics, it is not possible to increase the speed over that which is automatically suitable during the selection of the program.
It is possible to modify the spin speed without to pausing the machine.
Note:
The machine is fitted with a special electronic device, which prevents the spin cycle should the load be unbalanced.
This reduces the noise and vibration in the machine and so prolongs the life of your machine.
9
“DIGITAL” Display
4 3 1
H
2
The display’s indicator system allows you to be constantly informed about the status of the machine:
1) SPIN SPEED
Once the programme has been selected, the maximum spin speed allowed for that programme appears on the display. Pressing the spin button will reduce the speed by 100 rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is possible to omit the spin by pressing the spin button repeatedly.
2) DELAY START LIGHT
This flashes when delay start has been set.
3) “DOOR SECURITY” indicator light
The “ Door Security ” indicator light is illuminated when the door is fully closed and the machine is ON.
When " Start/Pause " is pressed on the machine with the door closed the indicator will flash momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle.
Wait for 2 minutes after the wash cycle has finished and the “ Door Security ” light has gone out before opening the door. At the end of the cycle turn the programme selector to " OFF " .
4) CYCLE DURATION
When a programme is selected the display automatically shows the cycle duration, which can vary, depending on the options selected.
Once the programme has started you will be kept informed constantly of the time remaining to the end of the wash.
The appliance calculates the time to the end of the selected programme based upon a standard loading, during the cycle, the appliance corrects the time to that applicable to the size and composition of the load.
10
Buttons indicator light M
These light up when the relevant buttons are pressed.
If an option is selected that is not compatible with the selected programme then the light on the button first flashes and then goes off.
PROGRAMME selector with "OFF" position N
When the programme selector is turned the display lights up to show the settings for the programme selected.
For energy saving, at the end of the cycle or with an inactivity period, the display level contrast will decrease.
To switch the machine off, turn the programme selector to the
“OFF” position.
Press the " Start/Pause " button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected programme till cycle ends.
Switch off the washing machine by turning the selector to " OFF ".
Note:
The programme selector must be returned to the "OFF" position at the end of each cycle or when starting a subsequent wash cycle prior to the next programme being selected and started.
11
CHAPTER 7
PROGRAM FOR:
Resistant fabrics
Cotton, linen
Cotton, mixed
Whites
EN
TABLE OF PROGRAMMES
PROGRAMME
SELECTOR
ON:
WEIGHT
MAX kg
4
TEMP.
°C
CHARGE DETERGENT
I
90°
● ●
Fast coloureds
**
4 60° ● ●
Fast coloureds
**
4 40° ● ●
4 30°
● ●
Non fast coloureds
Mixed fabrics and synthetics
Synthetics (nylon, perlon), mixed cotton
Fast coloureds
Non fast coloureds
Mixed, delicate synthetics
2
2
2
50°
40°
30°
●
●
●
●
●
●
Very delicate fabrics
Delicates
“MACHINE
WASHABLE” woollens
Hand wash
EcoMix 20°
Fast spin/
Drain only
Rinse
2
1
4
-
-
30°
30°
20°
-
-
●
●
●
●
●
●
●
Resistant or Mixed fabrics
Resistant or Mixed fabrics
Resistant fabrics
1
2
2
30°
30°
40°
●
●
●
●
●
●
12
Please read these notes
** STANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015/2010 and No
1061/2010
COTTON PROGRAMME with a temperature of 60°C
COTTON PROGRAMME with a temperature of 40°C
These programmes are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumptions for washing cotton laundry.
These programmes have been developed to be compliant with the temperature on the wash label on the garments and the actual water temperature may slightly differ from the declared temperature of the cycle.
The 30 minute rapid programme can also be used as a prewash cycle in the case of heavily soiled garments, before selecting the main wash programme.
13
Programme selector
For the various types of fabrics and various degrees of dirt the washing machine has different programme bands according to: wash cycle, temperature and lenght of cycle (see table of washing cycle programmes).
RESISTANTS FABRICS
The Cotton programmes are designed for maximum washing and rinsing efficiency. With spin cycles in between, the programme guarantees the laundry is rinsed perfectly. The final spin cycle ensures laundry is spun dry as much as possible up to the maximum speed.
MIXED AND SYNTHETIC FABRICS
The main wash and the rinse gives best results thanks to the rotation rhythms of the drum and to the water levels.
A gentle spin will mean that the fabrics become less creased.
SPECIAL DELICATE FIBRES
This is a new wash cycle which alternates washing and soaking and is particularly recommended for very delicate fabrics.
The wash cycle and rinses are carried out with high water levels to ensure best results.
WOOL & HAND WASH PROGRAMME
This programme allows a complete washing cycle for garments specified as “Machine-Washable” Wool fabrics and laundry items specified as “Hand Wash only” on the fabric label. The programme has a maximum temperature of 30°C and concludes with 3 rinses, one for fabric conditioner, and a slow spin.
"EcoMix" PROGRAMME
This innovative programme, allows you to wash different fabrics and colours together, such as cottons, synthetics and mixed fabrics at only
20°C and provides an excellent cleaning performance.Consumption on this program is about 40% of a conventional 40°C. cottons wash.
14
SPIN & DRAIN
The spin programme completes the spin at the maximum spin speed, this can be reduced by using the Spin Speed option button or excluded if you want drain only.
SPECIAL “RINSE” PROGRAMME
This programme carries out three rinses with a intermediate spin
(which can be reduced or excluded by using the correct button). It can be used for rinsing any type of fabric, eg. use after hand-washing.
DAILY WASH 30°C – FAST 14’
A complete washing cycle (wash, rinse and spin), able to wash in approximately 14 minutes:
- a maximum load of 1 kg;
- lightly soiled fabrics (cotton and mixed fabrics)
We recommend, with this programme, a 20% detergent loading dose
(compared to the normal one), in order to avoid detergent waste.
DAILY WASH 30°C – FAST 30’
A complete washing cycle (wash, rinse and spin), able to wash in approximately 30 minutes:
- a maximum load of 2 kg;
- lightly soiled fabrics (cotton and mixed fabrics)
We recommend, with this programme, a 20% detergent loading dose
(compared to the normal one), in order to avoid detergent waste.
WASH 59’
This specially designed programme maintains the high quality wash performance whilst greatly reducing the wash time. The progrramme is designed for a maximum load of 3 kg with a temperature of 40°C and concludes with 2 rinses and a high speed spin sequence.
Auto half load
The washing machine is fitted with a self adjusting water level system.
This system enables the machine to use the amount of water needed to wash and rinse the laundry in relation to the particular load.
This results in a reduction of the water and electricity used, without in any way compromising the washing and rinsing performance.
In fact the amount of water and electricity used will always be appropriate for the clothes load.
The washing machine automatically ensures excellent washing results at minimum cost whilst respecting the environment .
15
The detergent drawer is split into 2 compartments:
- the compartment labelled "I" is for main wash detergent.
- the compartment labelled " " is for special additives, fabric softeners, fragrances, starch, brighteners etc;
P
16
Choice of detergent
General purpose detergents
- Powder detergents , for a thorough wash, with bleaching agent, particularly suitable for use in hot wash programmes (60°C and over), for heavily soiled and stained laundry.
- Liquid detergents , particularly suitable for grease stains, such as greasy skin marks, cosmetics and oil.
These detergents are not suitable for washing stained laundry, as they do not contain bleach.
Biological detergents , not all the products available give a really thorough wash.
Additional laundry aids
Water softener , means less detergent can be used where water hardness is classed as hard to very hard.
Prewash substances , for the programmed treatment of stains prior to the main wash.
Using them means the subsequent wash can be at a low temperature or with bleach-free detergents.
Fabric softener , prevents static build-up in synthetic fabrics and softens fabrics.
If you own a tumble dryer, clothes are softened even without the use of a fabric softener.
Do not put solvents in the washing machine!
Keep detergents and other laundry products out of children’s reach.
Before pouring in the detergent check that there are no foreign bodies in the detergent drawer.
Dosage details are usually shown on the detergent packaging. Follow those instructions.
17
Dosages
Only use detergents which are suitable for use in a washing machine.
You will obtain the best results from your wash with the minimum use of chemical products and the best care for your laundry if you take into consideration the degree of soiling as well as the type of detergent to choose.
The amount of detergent to use depends on:
- water hardness: depending on the hardness of the water and the type of detergent used, it is possible to reduce the amount of detergent.
the degree of soiling: it is possible to reduce the amount of detergent used depending on the degree of soiling.
amount of laundry: it is possible to reduce the amount of detergent when washing only a small amount of laundry.
Dosage for powder detergent
For normal and low concentration detergents : for normally soiled laundry choose a programme without prewash.
Put the detergent in compartment “I” of the drawer.
For heavily soiled laundry, choose the prewash programme before the main wash.
When using water softeners, first put in the detergent, then add the softener to compartment “I” .
For highly concentrated detergents not in single dose format, follow what is shown on pack exactly as regards type and amount of dosage.
To avoid the difficulty of checking if the detergent has been taken up, use the dosage aids provided in the detergent packaging.
Liquid detergent dosage
Liquid detergents may be used in accordance with the instructions on the relevant packaging, for all programmes without prewash, by using the special container which is placed in the drum or, for those models that have it, in the special insert for liquid detergents.
18
Useful advice for users
Tips on using your domestic appliance in the most environmentally-friendly and economical way
Do a full load in your washing machine
To prevent any possible waste of energy, water or detergent we recommend that you put a full load in your washing machine, not exceed the recommended maximum load size.
Up to 50% energy saving can be made with one full load compared to two half load washes
When is prewashing really needed?
Only with particularly dirty loads!
Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled laundry.
Which wash temperature should you choose?
Using stain removers before machine washing reduces the need to wash at temperatures over 60°C.
Energy savings of up to 50% can be made by using a 60°C wash temperature rather than
90°C
19
Main wash
Sorting the laundry
- It is recommended you wash only items which are machine washable with water and detergent and not dry-clean items.
- If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them.
- Sort the laundry according to fabric type, degree of soiling and wash temperature: Always follow the wash care advice on the garment label for the most suitable care and treatment of the laundry
Laundry for hot wash
Coloured, easy-care materials
Delicates and wool
Wash by hand
Items labelled with the following symbol are not suitable for machine washing:
Dry clean
For very delicate items, such as net curtains, underwear, tights etc., you are advised to use a laundry net or wash bag.
- Woollen items must be labelled with the "Pure New Wool" symbol to be washed in the machine, and must also be labelled "non-matting" or "machine washable".
- Colour often leaks from new coloured items.
This can then colour other lighter items being washed.
We therefore recommend that coloured items should be washed for the first time separately.
For future washes, colourfast items can only be washed with whites up to 40°C.
Note: when sorting laundry
check there are no metal objects in the laundry
(such as paper clips, safety pins, pins, coins etc...);
button up pillowcases, fasten zips, hook & eye fasteners, belts and long dressing gown cords;
remove curtain hooks;
pay close attention to the labels on items
if you notice stubborn stains whilst sorting the laundry, remove them using a special detergent or a special stain remover.
- We recommend that you do not do a full load of towelling items only as these become too heavy since they absorb a lot of water.
20
The correct way to wash
Preparing the laundry
A) Select the laundry.
Loading the laundry
B) Open the porthole.
C) Put the laundry in the washing machine.
laundry are obstructing the lock.
Putting detergent in machine
D) Open the drawer, choose the detergent and put in instructions and the advice on page 17.
drawer again.
Selecting the wash programme
Refer to the programme guide or the programme descriptions on the machine to select the most suitable programme.
Turning the selector knob, the required programme is activated.
Press additional function buttons (if required).
Check that the tap is turned on and that the discharge hose is positioned correctly.
Press the " Start/Pause " button.
When the " Start/Pause " button is pressed the machine sets the working sequence in motion.
The programme carries out with the programme selector stationary on the selected programme till cycle ends.
Warning: If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left off.
When the programme is finished
The word “End” will appear on the display.
Wait for the door lock to be released (about 2 minutes after the programme has finished).
The " Door Security " indicator light will go out.
Switch off the machine by turning the programme selector on the “ OFF ” position. Open the door and remove the laundry. Turn off the tap.
21
Do not use alcohol-based scourers and /or thinners on the outside of your washing machine, just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance:
- Cleaning the drawer compartments.
- Cleaning the filter.
Even if it is not strictly necessary, it is good to clean the compartments for bleaching detergents and additives occasionally.
A) To do this you just need to pull them out firmly, but without forcing them.
B) Clean everything in the compartment under running water.
C) Put everything back in its proper place.
The washing machine is fitted with a special filter for handling large deposits which could block the discharge hose (coins, buttons etc.) and which can, therefore, be easily retrieved.
We recommend that the filter be cleaned at least once a month.
The cleaning operation is as follows:
1) Open the lid as shown in picture.
2) Turn the filter anti-clockwise until it stops in the vertical position.
Remove and clean.
3) After cleaning, replace by turning the notch on the end of the filter clockwise. Then follow all procedures described above in reverse order.
4) Close the lid.
22
Regularly clean the door glass with a damp cloth. A build up of soiling and residues from the water may result in water leaking from the door.
Do not use abrasive cleaners as they can scratch the surface.
If the appliance is being transported or is out of use for long periods in unheated places, all remaining water must be completely removed from the hoses.
Ensure mains power is off, then unclip the hose and point it downwards into a basin until all the water has emptied out.
When finished, repeat the operation in the reverse order.
23
Investigating malfunctions
What might be the cause of…
Defects you can remedy yourself
MALFUNCTION CAUSE
1. Does not work on any programme
2. Does not fill with water
3. Water does not drain away
4. Water on floor around the washing machine
5. Does not spin
6. Machine vibrates a lot during spin
7. Door will not open
REMEDY
Plug not in socket.
Not switched on.
Power failure.
Fuse blown.
Door open.
See cause 1.
Tap turned off.
Programme selector not correctly positioned.
Fill hoses are kinked
Plug it in.
Switch on.
Check.
Check.
Close door.
Check.
Turn on tap.
Position programme selector correctly.
Straighten fill hoses
Kink in discharge hose.
Foreign bodies in filter
House drain is blocked
Leaking gasket between tap and water inlet hose.
House drain is blocked
Soap drawer blocked with soap residues
Straighten discharge hose.
Examine filter (see pages 23-24)
Clean drain
Replace gasket and tighten hose and tap well.
Clean drain
Clean soap drawer
Water has not yet drained away.
"No spin" selected (certain models only).
Wait a few minutes for machine to empty.
Reset button or turn "no spin" knob.
Washing machine not completely level.
Transit brackets not removed yet.
Load not distributed evenly.
Two minutes have not elapsed since the programme finished.
Adjust the special adjustable feet.
Remove transit brackets.
Rearrange the laundry evenly.
Wait two minutes.
8. Display reads error
0, 1, 5, 7, 8, 9
9. Display reads error 2
–
No water fill.
Call service.
Check water supplies are on.
10. Display reads error 3 No pump out.
Check drain is clear.
Check drain hose is not kinked.
11. Display reads error 4
Machine overfilled with water.
Turn off water supply to machine.
Call service.
The machine makes a different noise when spinning! This is because it has a brush motor for better performance.
Only a small level of water can be seen in the drum! This is because new machines do not use much water, yet achieve the same standard of washing and rinsing.
24
Note:
The use of environmentally-friendly, phosphate-free detergents can have the following effects:
waste water from rinsing may be cloudier because of the presence of zeolites held in suspension, without the rinse performance being adversely affected;
presence of white powder (zeolites) on laundry after washing, which is not absorbed by the fabric and does not alter the colour of the fabric.
The presence of foam in the final rinsing water is not necessarily an indication of poor rinsing.
Anionic surfactants used in washing detergent formulae often prove to be difficult to remove from the laundry itself and, even in small quantities, can still cause considerable foam production.
Carrying out more rinse cycles does not serve any purpose in such cases.
25
Fig. 2
Technical data
Max. load of dry laundry
Water pressure
4 kg
0,05 ÷ 0,8 MPa
Measurements
Width
Depth
Height
51 cm
43 cm
70 cm
NB: For specifications regarding electrical data, see the data panel on the front of the washing machine (porthole area) - as shown in diagram above.
26
1
2
Remove the polystyrene base and place the machine near its permanent position (diagram 1).
Carefully cut through the hose retaining clip at the rear of the appliance (diagram 2).
Unscrews the two top screws A and remove the cover, sliding it off horizontally (diagram 3).
Remove the cardboard protection.
Unscrews the two tie braces B on the crosspiece (with an H.
19 spanner) and remove the polystyrene spacers under it
(diagram 4).
Please do not fit the 2 tie braces B again!
IMPORTANT: DO NOT REMOVE THE SPACERS ABOVE THE CROSSPIECE.
Replace the cover with the two screws A .
Please ensure when fitting the table top the locating pins are inserted correctly in their slots, positioned on the side of the cabinet as shown in the diagram 5.
3 4 C B 5
A
WARNING:
DO NOT LEAVE THE PACKAGING WITHIN REACH OF CHILDREN AS IT IS A
POTENTIAL SOURCE OF DANGER.
Apply the insulation sheet of corrugated material to the base as shown in the relevant diagram.
Level the machine by means of the front feet.
a) Turn the nut clockwise to release the screw adjuster on the foot.
b) Rotate the foot to raise or lower it until it stands firmly on the ground.
c) Lock the foot in position by turning the nut anti-clockwise until it comes up against the bottom of the machine.
Note: we recommend you keep the screws to immobilise the machine for future transit.
The Manufacturers will not be responsible for any possible damage to the machine caused by not following the rules relating to releasing the mechanism.
The user is responsible for all costs of installation.
Water connection
The appliance must be connected to the water mains using new hose-sets.
The old hose-sets should not be re-used.
The machine has an inlet hose with 3/4" B.S.P threaded end connection to attach between the threaded connector on the appliance and the cold water supply.
This machine only uses cold water, therefore only one hose is needed to connect to the cold water supply. Do not connect to the hot supply.
Cold fill is an energy efficient system. Only the water required for the washing is heated.There
is no loss of heat in the pipeline from a hot water tank or boiler to the machine.
min 4 cm
+2,6 mt max min 50 cm max 85 cm
28
Note: it is advisable to turn off the tap after each wash to isolate the washing machine from the water supply.
For the washing machine to function properly the terminal end of the discharge hose (mouth) must be at a minimum of 50 cm and a maximum of 85 cm from the ground.
ELECTRICAL CONNECTIONS
After installation, the appliance must be positioned so that the plug is accessible.
If the plug we supply does not fit
CUT IT OFF AND DESTROY IT!
You can’t use it on other appliances, and the exposed wires could be dangerous if plugged in.
To fit a replacement plug, proceed as follows:
Connect green and yellow wire blue wire brown wire to the terminal in the plug marked with the letter E,
OR marked with the symbol,
OR coloured green,
OR coloured green and yellow.
marked N
OR coloured black.
marked L
OR coloured red.
WARNING
This appliance must be earthed
Fuses and plugs
This appliance should be used only on a socket with a minimum rating of 13 Amp.
Our ready-fitted plug is already equipped with a 13 amp fuse which is BS 1362 ASTA approved. Any replacement should be exactly the same.
If the fuse cover is lost, do not use the plug until it is replaced. A correct replacement fuse cover (obtainable from your local retailer) must be the same colour as shown or named on the insert on the base of the plug.
29
Recommendations on the use of detergent at various temperatures
When washing heavily soiled whites, we recommend using cotton programs of 60°C or above and a normal washing powder (heavy duty) that contains bleaching agents that at medium/high temperatures provide excellent results. For washes between 40°C and 60°C the type of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling. For washing at temperatures below 40°C we recommend the use of liquid detergents or detergents speci cally labeled as suitable for low temperature washing. For washing wool or silk, only use detergents speci cally formulated for these fabrics. For dosage amounts please follow the instructions on the detergent package label.
The manufacturer declines all responsibility in the event of any printing mistakes in this booklet. The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics.
30
fdglòjhfdòfg
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules:
- WEEE should not be treated as household waste;
- WEEE should be handed over to the relevant collection points managed by the municipality or
by registered companies. In many countries, for large WEEE, home collection could be present.
In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.
EN
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Advertisement
Compact size, ideal for small spaces
4kg capacity, perfect for small households
1000 spin speed for faster drying and reduced energy consumption
Range of programmes for different fabrics and soil levels
Intuitive control panel for ease of use
Delay start function for scheduling washes
The maximum load capacity is 4kg.
The spin speed is 1000rpm.
The energy efficiency rating is not specified in the provided document.
What is the maximum load capacity for the 'Shirts' wash cycle?
The standard 'Shirts' wash program has a maximum load capacity of 2 kg, at a recommended temperature of 30°C. Additionally, the 'DAILY WASH 30°C – FAST 14’' program handles 1 kg, and the 'DAILY WASH 30°C – FAST 30’' program handles 2 kg.
Login to continue