RR220D4AB2 RR220D4AR2 RR220D4AD2 2 Safety and warning information.......2 Description of the appliance ...........8 Control panel...................................8 First use an installation....................9 Daily use.........................................11 Helpful hints and tips.......................12 Cleaning and care............................13 What to do if... .................................14 Disposal of the appliance.................15 This appliance is in accordance with the following EU guidelines:LVD 2014/35/EU and EMC 2014/30/EU and 2009/125/EC and EC.643/2009 and 2002/96/EC For your safety and correct usage, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to make sure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and be sure that they remain with the appliance if it is moved or sold, so that anyone using it throughout its life, will be properly informed on its usage and safety notices. For the safety of life and property, keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission. Safety for children and others who are vulnerable people. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep all packaging away 3 from children as there is risk of suffocation. If you are discarding the appliance, pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it. If this appliance, featuring a magnetic door seals, is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make the spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child General safety WARNING — This appliance is intended to be used in household and similar applications such as -staff kitchen areas in shops, offices and other working environments; -farm houses and by clients in hotels, motels and other residential type environments; -bed and breakfast type environments; -catering and similar nonretail applications WARNING — Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. WARNING — If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. WARNING — Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING — Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING — Do not damage the refrigerant circuit. WARNING — Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. WARNING — The refrigerant and insulation 4 blowing gas are flammable. When disposing of the appliance, do so only at an authorized waste disposal centre. Do not expose to flame. Refrigerant The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged. The refrigerant (R600a) is flammable. Caution:risk of fire If the refrigerant circuit should be damaged: -Avoid opening flames and sources of ignition. -Thoroughly ventilate the room in which the appliance is situated. It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a shortcircuit, fire, and/or electric shock. Electrical safety 1.The power cord must not be lengthened. 2. Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire. 3. Make sure that you can access the main plug of the appliance. 4. Do not pull the main cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6.You must not operate theappliance without the interior lighting lamp cover. 7.The fridge is only applied with power supply of single phase alternating current of 220~240V/50Hz. If fluctuation of voltage in the district of user is so large that the voltage exceeds the above scope, for safety sake, be sure to apply A.C. Automatic voltage regulator of more than 350W to the fridge. The fridge must employ a special power 5 socket instead of common one with other electric appliances. Its plug must match the socket with ground wire. Daily use Do not store flammable gass or liquids in the appliance,There is a risk of an explosion. Do not operate any electrical appliances inthe appliance(e.g.electric ice cream makers,mixers etc.). When unplugging always pull the plug from the mains socket,do not pull on the cable. Do not place hot items near the plastic components of this appliance. Store pre-packed frozen food in accordance with the frozen food manufacture’s instructions. The appliances manufactures storage recommendations should be strictly adhered to. Refer to relrelevant instructions for storage. Do not place carbonated or fizzy drinks in the freeze compartment as it creates pressure on the container,which may cause it to explode,resulting in damage to the appliance. Frozen food can cause frost burns if consumed straight from the freezer compartment. Do not place the appliance in direct sunlight. Keep buring candles,lamps and other items with naked flames away from the appliance so that do not set the appliance on fire. The appliance is intended for keeping food stuff and/or beverages in normal household as explained in this instruction booklet. The appliance is heavy.Care should be taken when moving it. Do not remove nor touch items from the freezer comartment if your hands are damp/wet,as this could cause skin abrasions or frost/freezer burns. Never use the base, drawers, doors etc. to stand on or as supports. Frozen food must not be refrozen once it has been thawed out. Do not consume ice popsicles or ice cubes straight from the freezer as 6 this can cause freezer burn to the mouth and lips. To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or put too much food in the crisper drawers. Caution! Care and cleaning Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket. Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic solvents or abrasive cleansers. Do not use sharp objects to remove frost from the appliance. Use a plastic scraper. Installation Important! For electrical connection carefully, follow the instructions given in this manual. Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In this case retain packing. It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation. Wherever possible the back of the product should not be too close to a wall to avoid touching or catching warm parts (compressor, condenser) to prevent the risk of a fire, follow the instructions relevant to installation. The appliance must not be locate close to radiators or cookers. Make sure that the mains plug is accessible after the installation of the appliance. Service Any electrical work required to do the servicing of the appliance should be carried out by qualified electrician or competent person. This product must be serviced by an authorized Service Center, and only genuine spare parts must be used. 7 1)If the appliance is Frost Free. 2)If the appliance contains freezer compartment. 8 Description of the appliance View of the appliance 1. Freezer chamber 2. Ice tray(in Freezer chamber ) 3. Temperature regulator 4. Lamp cover 5. LED light(in the lamp cover) 6. Control knob 7. Storage shelves 8. Wine rack 9. Crisper cover 10. Crisper 11. Door 12. Door racks 13. Adjustable feet 1 11 2 3 4 5 6 7 8 12 9 10 13 Note: Due to continual modification of our products, your refrigerator may be slightly different from this instruction Manual, but its functions and usage methods remain the same. Control panel Starting up and temperature regulation Insert the plug of the connection lead into the plug socket with a protective grounding contact. When the refrigerator compartment door is opened, the internal lighting is switched on. The temperature selector knob is located on the back side of the refrigerator compartment. Setting “off” means no cooling Turn the temperature control to “off” position stops the cooling cycle,but does not shut off the power of the refrigerator. Setting “1” means Highest temperature, warmest setting. Setting “7” (end-stop) means Lowest temperature, coldest setting. Important! Normally, we advise you select a setting of 2, 3 or 4; if you want the temperature higher or lower, please turn the knob to a warmer or colder setting accordingly. When you turn the knob to a colder setting, this can lead to the more energy efficiency. Otherwise, it would result the consumption of energy. Important! High ambient temperatures (e.g. on hot summer days) and a cold setting (position 6 to 7) may cause the compressor to run continuously or even non-stop! Reason: When the ambient temperature is high, the compressor must run continuously to maintain the low temperature in the appliance. Warning! Don’t try to repair the appliance and change the LED light yourself. If the LED light can’t work, please contact your specialist dealer or your local Customer Service Center to change it. 9 100mm 100mm 978mm Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and meutral soap in order to remove the typical smell of a brand new product, then dry thoroughly. 664mm Cleaning before use 100mm First use an installation 140° 75mm 980mm 100mm Installation Positioning Warning! Before installing, read the instruction carefully for your safety and the correct operation of appliance. Position the appliance away from sources of heat such as stoves, radiators, direct sunlight, etc. Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for the class of unit concerned, as specified on the rating plate. This appliance performs well from N to ST. The appliance may not work properly if it is left for a longer period at a temperature above or below the indicated range. Important! It is necessary to have good ventilation around the fridge to allow for the dissipation of heat, high efficiency an low sufficiently cleared space should be available around the fridge. It is advisable for there to be 75mm separating the back of the fridge to the wall at least 100mm of space on its two sides, a height of over 100mm from its top and a clear space in front to allow the doors to open 160°. Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the low rear section of the appliance, as poor air circulation can affect performance. Built-in appliances should be positioned away from heat sources such as heaters and direct sunlight. Installing the rubber supporting screw provided in a plastic bag with your appliance, you can install these accessories according to the following procedure. Note: There is no need to install these accessories under normal usage. Only under the extreme circumstances, cabinet empty while load on door with total mass of 15 kg and opening the door about 90 degree ,this refrigerator may take risk of tipping. Then rubber supporting pad should be fastened to the lower base cover to steady this appliance. 1.Tilt appliance to find screw hole on the left of lower base cover. lo wer base cover 10 First use an installation 2.Put screw into the hole of rubber supporting pad. scr ew rubber supporting pad 3.Make screw in alignment with the hole on lower base cover . Fasten rubber supporting pad to the base cover firmly by a cross screw driver (self-provided). cro ss screwdrawer Leveling The appliance should be level in order to eliminate vibration. To make the appliance level, it should be upright and both adjusters should be in stable contact with the floor. You can also adjust the level by unscrewing the appropriate level adjustment in the front (use your fingers or a suitable spanner). Electrical connection Caution! Any electrical work required to install this appliance should be carried out by qualified or authorized personnel. Warning! This appliance must be grounded. The manufacturer declines any liability should these safety measures not be observed. 11 Daily use Accessories 1) Movable shelves/trays Various glass, plastic storage shelves or wine rack are included with your appliance different models have different combinations and different models have different features. Crisper For storing fruit and vegetables. Ice tray It is used for making ice. There are some notes during the ice making: 1. If the ice tray is used for the first time or has not been used for a long time, please clean it before using. 2. When you pour water into the ice tray, the water level shall not exceed the top line. Refrigerator compartment For storing the food that does not need to be frozen and different sections suitable for different kinds of food. Freezer food compartment 2) For freezing fresh food and storing frozen and deep-frozen food for a long time. Thawing food 3. The ice tray should be carefully placed in the huge freezer without the water spilt otherwise the spilt water will be frozen and cause the ice tray stuck. 4. To take out the ice cubes, you should gently twist the ice tray and bend it over. . 2) 2) In the refrigerator compartment. At room temperature. In a microwave oven. In a conventional or convection oven. Food once thawed should be refrozenwith the exception of special cases. 1) If the appliance contains related accessories and functions. 2) If the appliance contains a freezer compartment. 12 Helpful hints and tips Noises during operation Clicks - Whenever the compressor switches on of off, a click can be heard. Humming - As soon as the compressor is in operation, you can hear it humming. Bubbling - When refrigerant flows into thin tubes, you can hear bubbling or splashing noises. Splashing - Even after the compressor has been switched off, this noise can be heard for a short time. Energy saving tips Do not install the appliance near stoves, radiators or other sources of warmth. Keep the time the appliance is open to a minimum. Do not set the temperature colder than necessary. Make sure the side plates and back plate of the appliance are at some distance from the wall, and follow the instructions relevant to installation. If the diagram shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as it would produce an effect on energy consumption. Hints for fresh food refrigeration Do not store warm foods or evaporating liquids in the appliance. Do cover or wrap the food, particularly if it has strong flavor or odor. Position food so that air can circulate freely around it. Hints for refrigeration Meat (all types): wrap in polyethylene (plastic) bags and place on the glass shelf above in this way only on or two days at the most. Cooked foods, cold dishes, etc...: these should be covered and may be placed on any shelf. Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer provided. Butter and cheese: these should be placed in aluminum foil or polyethylene (plastic) bags while removing as much air as possible. Milk bottles: theses should have a cap and should be stored in the bottle rack on the door. Hints for freezing When first staring-up or after a period out of use. Before putting the food in the compartment, let the appliance run at least 2 hours on the higher settings. Prepare food in small portions to enable it to rapidly and completely frozen and to make it possible to subsequently thaw only the quantity required. ‘Wrap up the food in aluminum foil or polyethylene (plastic) and make sure that the packages are airtight. Do not allow fresh, unfrozen food to touch food that is already frozen, thus avoiding a rise in the temperature of latter. Iced products, if consumed immediately after removal from the freezer compartment can possibly cause skin to become freezer burnt. It is recommended to label and date each frozen package in order to keep track of the storage time. Hints for the storage of frozen food Make sure that commercially frozen food was stored by the retailer. Once defrosted, foods deteriorate rapidly and can not be re-frozen. Do not exceed the storage period indicated by the food manufacturer. Note: If the appliance contains related accessories and functions. 13 Cleaning and care Cleaning and care For hygienic reasons, the appliance interior, including interior accessories, should be cleaned regularly. The appliance should be cleaned and maintained at least every two months. Warning! Danger of electrical shock! The appliance should not be connected to the main power supply during cleaning. Before cleaning, switch the appliance off and remove the plug from the main power supply, switch off, or shut off the circuit breaker of fuse. Notice! Remove the food from the appliance before cleaning. Store them in a cool place and keep well covered. Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components. Hot vapors can lead to the damage of plastic parts. Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice from an orange peel, butyric acid, or cleansers that contain acetic acid. Do not use any abrasive cleansers. Clean the appliance and the interior accessories with a cloth and lukewarm water. Commercially available dish washing detergents may also be used. After cleaning, wipe with fresh water and a clean dish cloth. Accumulation of dust at the condenser increases energy consumption; clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner.(Only for the outside-condenser product) Check the water drain hole on the rear wall of the refrigerator compartment. Clear a blocked drain hole with the aid of something like soft green peg, an be careful not to create any damage to the cabinet by sharp objects. After everything is dry, the appliance back into service. Defrosting Defrosting in the fresh food storage compartment Water from the defrosting option will automatically be drained into a drip tray through a drain pipe at the back of the appliance. Defrosting in the frozen food storage compartment Defrosting in the freezer chamber is operated manually. Before defrosting, take the foot out. Tale the ice tray and drawers out or put them into the fresh food compartment temporarily. Set the knob of the temperature regulator to the “0” (where the compressor will stop working) and leave the door of the refrigerator open until ice and frost dissolve thoroughly and accumulate at the bottom of the freezer chamber. Wipe out the water with soft cloth. In order to speed up the process of defrosting, you may put a bowl of warm water (about 50℃) into the freezer chamber and scrape away the ice and frost with a defrosting spatula. After doing so, be sure to set the knob of the temperature regulator to the original position. It is not advisable to heat the freezer chamber directly with hot water or hair dryer while defrosting to avoid deformation of the inner case. It is also not advisable to scrape off ice and frost or separate foods from the containers which have been congealed together with the food with sharp tools or wooden bars, so as not to damage the inner casing or the surface of the evaporator. Warning! To switch off the appliance before defrosting, turn the temperature regulator to the “0” position. Notice! The appliance should be defrosted at least once a month. During its usage, if the door has been used in extreme humidity, we advise the user to defrost every two weeks. Taking the appliance out of service Empty the appliance Pull out the power plug Clean thoroughly (see section: Cleaning and Care). Leave the door open to prevent odours 14 What to do if... Warning! Before troubleshooting, disconnect the power supply. Only a qualified electrician or other personnel must carry out the troubleshooting that is not in the manual. Important! Repairs to the appliance may only be Problem Appliance dose not work. Appliance cools too much. The food is too warm. performed by competent service engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or your local Customer Service Center. Possible cause Solution Appliance is not switched on. Switch on the appliance. Main plug is not plugged in or is loose. Plug the appliance into the electrical socket. Fuse has blown or is defective. Check fuse, replace if necessary. Outlet is defective. Defective parts need to be repaired by an electrician. Temperature is not properly adjusted. Turn the temperature regulator to a warmer setting temporarily. Please refer to the “Initial Start Up” section. Door was open for an extented period. Open the door only as long as necessary. A large quantity of warm food was placed in the appliance within the last 24 hours. Turn the temperature regulator to a warmer setting temporarily. The appliance is near a heat source. Please refer to the “Installation Location” section. Please look in the “Control panel” section. Carefully warm the leaking sections of the door seal with a hair dryer (on a cool setting). At the same time, shape the warmed door seal by hand so that it sits correctly. Readjust the feet. Temperature is set too cold. Interior lighting dose not work. LED light is defective. Heavy build-up of frost, possibly also on the door seal. Door seal is not air-tight (possibly after reversing the door) . Appliance is not level. Unusual noises. The compressor dose not start immediately after changing the temperature setting. Water on the floor or storage shelves. The appliance is touching the wall or other objects. Move the appliance slightly. A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall. If necessary, carefully bend the component out of the way. This is normal, no error has occurred. The compressor starts after a period of time. Water drain hole is blocked. Refer the “Cleaning and Care” section. 15 Disposal of the appliance It is prohibited to dispose of this appliance in domestic household waste. Packaging materials Packaging materials with the recycle symbol are recyclable. Dispose of the packaging in a suitable waste collection container to recycle it. Before disposal of the appliance. 1. disconnect the main plug from the main socket. 2. Cut off the main cable and discard it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project