Kodak Instamatic 814 Instructions
Kodak Instamatic 814 is a high-quality camera that allows you to take black-and-white or color snapshots and slides with ease. It features a rangefinder for precise focusing, automatic film advance for up to 20 exposures, and a built-in flash for low-light conditions. Additional features include a 38mm f/2.8 Ektar lens, automatic daylight exposure control, and a variety of shutter speeds for creative photography.
PDF
Dokument
Oglas
Oglas
DETAILS © Film Size—Kopaxk Мо. 126 film cartridge: 12- or 20-axposura. ® Negative Size—28 x 28mm. Lens—- 38mm, 1/2.8 KoDax Extan a Lens Openings=1/2.8 through 1/64. a Lens Attachments—Accepts screw-in type, 34 x .5mm, Series 5 filters directly. Also, Series 6 by adapter, Shutter—Automatically Set ® Speeds=1/60, 1/125, 1/250: also 1/30, sat by exposure control and 1/40 for flash, Algo “E” for brief time exposures. Focusing and Viewing ® Rangefinder—3Superimposed-image type, combined with viewfinder, e YViewfinder—QOptical, projected viowframe- type with parallax marks for 6 feet, #® Focusing Range=3 ft to infinity, e llluminated signals for Insufficient light and flash readiness. Automatic Film Advance @ Spring motor advances film=20 axpo- sures, plus leader and trailer. Automatic Daylight Exposure Control e Fiim speed ls set automatically by film cartridge (ASA 64 to 800). ® Lens openings set automatically by electric eve. ® Automatic shutter control reduces speed after maximum lens opening is reached. Automatic Flash Control a Guide number ls set automatically by film cartridge (50 to 228). * Built-in socket for 4-bulb flashcube. a Correct lens opening is sot by focusing. a Flash shutter speed (1/40 sec.) is set automatically by Inserting flashcube, ® Uses 2 PX-B25 batteries. Other Features a Instant Loading and Unloading. » Tripod Socket. a Eyelets for neckstrap (supplied). * Die-cast metal body; black and satin chrome finish. EASTMAN KODAK COMPANY + Rochester, New York 14650 Pr. Ma. 433090 ed CH— Printed in tha United Stolos al America KODAK i "A AUDAÄR INSIAMATIG 814 CAMERA 1 KODAK INSTAMAT Your KODAK INSTAMATIC 814 Camera is the most distinguished member of the KODAK INSTAMATIC 81 4 family. In addition to its instant-loading feature, fine f/2.8 EKTAR Lens, daylight exposure control (battery- CAM ERA powered cadmium sulphide cell), and automatic flash exposure control, it provides rangefinder focusing, automatic film advance, illuminated finder signals, and automatic flashbulh advance with the flasheube. After inserting batteries, simply do this. .. e Drop in 126 film cartridge—camera is loaded e Wind Spring-Power Motor—first exposure is ready e Look through Viewfinder and adjust Rangefinder— camera 15 focused e Compose picture and press Shutter Release—you've taken the picture ..Feadon for the details NOTICE: Equipment subject to minor appearance changes. — Wr. A | Kodachrome TRANSPARENCY PROCESSED BY Kodak 4 Your camera takes all threg— 1 Black-and-white snapshots 2 Color snapshots 3 Color slides Before you take any important pictures, camera and your op- eration of it. Expose pictures outdoors and also indoors with flash. If time is pressing, a cartridge of black-and-white film can be proc- essed very quickly. FILM Your camera accepls all KobDak films in the 126 cartridge for instant camera loading and unloading. You can make black-and-white snapshots, color snapshots, or color slides. Snapshots are handy to carry, mail, and make enlargements of— slides are brilliant, compact, and good for showing to large groups. Select the film that provides the type of picture you want. NOTE: Storing the camera with the motor fully wound does not weaken the spring. If, after a cartridge has bean removed from the camera, the shutter release is pressed, the spring tension is released. For the spring motor to again retain power, a car- tridge must be loaded in the camera. Kopax VericHrOME Pan Film, VP 126 > Konacoor-X Film, CX 126 > KooacHroMe-X Film, KX 126 |p Konax EXTACHROME-X Film, EX 126 | Kopax High Speed ExracHrome Film, EH 126 № A gy = For 12 black-and-white snapshots. Standard enlarged black-and-white prints from your negatives are 3%: x 3% inches in size. Bigger enlargements are available. For 12 or 20 color snapshots. Standard enlarged color prints are 314 x 31 inches in size. Color slides, as well as bigger color enlargements, are also available. For 20 color slides. These color pictures on film are framed in 2 x 2-inch mounts, for slide projection. — "= BEE For 20 color slides. Can be processed by the user or by à laboratory. These color pictures on film are framed in 2 x 2-inch mounts, for showing in slide projectors. For 20 color slides. This extremely fast film is ideal for taking pictures of dimly lighted subjects or fast action. These color pictures on film are framed in 2 x 2-inch mounts, for slide projection. Can be processed by user or à laboratory. Films, processing, printing, and mounting service, can be obtained from your photo dealer. NOTE: You obtain color negatives from Kopacowor-X Film. These negatives are pri marily for enlarged color prints, but you can also db: tain color slides from the negatives. From Kopa- CHROME-X, KoObaAK EkKTA- CHRÔME-X, or High Speed EETACHROME Film, vou ab. tain color slides, ready for projection. You can also have duplicate slides or an: larged color prints made from the original slides. LOADING Open the back of the cam- era by sliding the Lock but- ton down to pop open the hinged cover; then swing out the cover, as far as it will go, approximately per- pendicular to the camera. With the cover in its per- pendicular loading position, place a film cartridge in the camera, as illustrated, with the larger cylindrical end down and toward the lock button. Close the back of the cam- era by pressing the back against the body until it locks. The film name and number of exposures per cartridge appear in the wix- pow on the back of the camera. The film speed and flash guide number are now automatically set. (If the motor is wound, the first exposure positions itself im- mediately.) Raise the black PuLL-TAB, draw the winding tape straight out (as above); then, while still grasping the tab, allow the tape to return —repeat until the motor is fully wound (about 7 full strokes or until locked.) * This windup positions film for the first exposure and provides power to advance the film automatically for subsequent exposures. If an arrow shows in the window, the first exposure hasn't been reached, thus indicating insufficient windup. To get the maximum number of advances, wind the motor fully after ex. posure “1” is in place. The number that appears in the center of the window on the back of the camera (shown above, right) serves as your exposure COUNTER. Thé same number may appear in duplicate. “After winding, make sure the pull-tab is fully seated in its recess; otherwise, film will not advance. UNLOADING 1. After the last picture, the yel- low paper will automatically move past the window, provided the spring motor has been wound sufficiently. If not and an “YX shows in the window, before opening the back of the camera, draw out the winding tape a few strokes to advance the yellow paper beyond the window. 2. Slide down the lock button: open the back. 3. Turn the camera over to al- low the cartridge to fall into your hand. Close the back. Do not open the cartridge—your pictures may be ruined. NOTE: Do not remove the car: tridge from the camera until all the yellow paper, with не "Ха," has been moved past the window: otherwise several exposuras will be "lightfogged.”” Removing and replacing partially-exposed car- tridges, even under darkroom con- ditions, may result In loss of one or more exposures, INSTALL BATTERIES Batteries must be installed before taking any pictures. Install two fresh 1.5-volt, alkaline, button-type PX825 batteries (such as supplied with camera) fo power the daylight exposure-control, warning signals and flash. Do this as follows: First, clean battery contact surfaces with a rough cloth. Rotate the battery compartment LATCH clockwise; the BATTERY CLIP will spring out so thal it can be withdrawn for loading. As shown in the illustra- tion, insert both batteries, positive (+) side up, into the clip as far as they will go. Replace the loaded clip in its compartment, plus (+) side up, as shown; then hold the clip all the way in while rotating the LATCH counterclockwise to its horizontal, lock posi- HATTEHRY СЫР 1 = в - tion. Test batteries, as below. Battery Testing—A built-in battery tester permits you to periodically check the present condition of your batteries for exposure-control purposes. Merely press the Test BUTTON on the front of the camera, If battery condition is satisfactory, a green light appears in the TEST WINDOW. If not, clean battery contact surfaces with a rough cloth, re-install, check, and, if necessary, replace with fresh batteries, IMPORTANT —Because bright light actuating the electric eye causés a slow battery drain, battery life can be greally extended by storing the camera in a dark place or in the field case, described on page 17. SHUTTER SETTING ITA TNA | INSTAMATIC 914 5 = Li os Your camera has four manually adjustable shutter settings — 60 (1/60 sec.), 125, 250, and “B" — plus 1/40, which is automatical- "UU a. fy | ly selected for flash by inserting oa % vi | the flashcube in the socket. A Pc shutter speed of 1/125 (125) is recommended for general daylight picturetak- ing; the faster speed (250) is useful to minimize the effect of subject or camera movement, while the slower speed (60) can be used for less favorable light conditions. If there is not sufficient available light for proper exposure at the slowest shutter speed (selected automatically; page 10), a red warning SIGNAL, USE FLASH, will appear in the viewfinder, as the shutter release is slightly depressed. If flash is not appropriate, use the “B"” (Brief time) setting — the shutter opens when the shutter release is fully depressed and closes when pressure is removed. After cach “B" exposure the shutter setting moves automatically to 250 (1/250) and can easily be reset for another “B” exposure. The camera must be on a solid support, such as a tripod, for these longer exposures. To select a shutter setting, rotate the knurled shutter speed DIAL so that the desired speed number or “B” clicks into place opposite the speed INDEX, AUTOMATIC DAYLIGHT EXPOSURE CONTROL The size of the lens opening is automatically controlled by the | amount of light reflected to the ELECTRIC EYE by the scene. | Make sure that the electric eye is not obstructed during picture- taking by the fingers or any other object. In weak light, when the lens opening has reached its largest | opening (f/2.8) the shutter, regardless of the dial setting, auto- matically begins to reduce speed (except at “B”) to give the cor- rect exposure, as far as 1/30, if necessary. A red warning SIGNAL, USE FLASH, will appear, as the shutter release is slightly depressed, in the right side of the luminous frame of the viewfinder, if there is insufficient light for a property exposed picture — this indicates use of either flash or a “B” exposure. Under these low-light conditions, judge “B" exposure times on the basis of f/2.8. Unusual Situations: In daylight pictures, when severe brightness differences occur between the subject and the background and it is possible ro get close to the subject, you can exclude the background by moving up to a place where only the subject fills the finder, Then press down the shutter release, shown, page 13, about 14 of the way (not far enough to release the shutter), continue to hold the release in this position to maintain the closc-up exposure setting; then step back, aim, and press the release down fully to take the picture. Rangefinder Focusing—As you look through the view- Top Mustration: Dou- finder, you will also notice a circular area in the center ble image in range: of the field of view=this is the rangefinder field. Until finder indicates out- the camera is focused for the correct camera-to-subject of-focus subject. a | pti rg НИЙ distance, this field shows a double image of the subject. DAYLIGHT PICTURES e Set the shutter speed. For general picturetaking, the shuiter-speed setting may be left at 125. e Focus the camera for the camera-to-subject distance by using the rangefinder, symbols, or the footage scale on the lens mount. bé Ln 1 LC EC ated, our eve € image move together and coincide, so that only one > é do de pique ar ee utero fi the sub- Fo Single rangefinder To set the distance correctly, rotate the LENS MOUNT, image means camara by its convenient ki ines is properly focused. y 10b, until the outlines of the double APDO TT VES Abe Neue de mc proies Room ject is framed by the luminous viewfinder. If, as the shutter release is slightly depressed, the red warning signal appears in the right side of the viewframe, there's not sufficient light for proper exposure. How- ever, flash can be used for close subjects or a “В” exposure for à still subject. + ; e Hold the camera steady and take the picture by slow- Le ly pressing the SHUTTER RELEASE all the way down. | e With the spring motor wound, film advances auto- matically to the next frame when pressure is re- moved from the shutter release. Scale Focusing—You can also focus by turning the lens mount until the figure representing the camera-to-sub- ject distance in feet (or symbol for CLOSE-UP, GROUP, Or SCENE) 15 opposite the focusing MARK. Live wy | т | INS В MATIC 014 ‚AMERA SHUTTER RELEASE 13 FLASH PICTURES Your camera features easy, rapid flash picturetaking with the rotating flash- cube, and automatic flash control—the correct lens opening is automatically set as you focus for the camera-to- subject distance. The rotating flashcube incorporates 4 blue bulbs (for all films), reflectors and flashguards. * For color prints, use KobAcoLor-X Film. * For color slides, use KODACHROME-X, KODAK EKTACHROME-X, or High Speed EKTACHROME Film. ® For black-and-white prints, use Konak VERICHROME Pan Film. TAKING FLASH PICTURES a Insert Flashcube—Insert the base of the FLASHCUBE into the socket on the top of the camera; then press down the flashcube until it snap-locks in place with one of its four sides facing forward in its detent (click- stop) position. If a fresh bulb is in the frontal firing position, à FLASH READY SIGNAL appears in the left side of the viewframe as the shutter release is slightly de- pressed. Absence of this signal indicates that the cube is not detented in its frontal firing position or that a used bulb is in the forward position. Also, a dim signal or no signal can indicate that batteries should be checked and possibly replaced. The Use FLASH signal may or may not appear, depending on the amount of illumination present. The cube revolves* one quarter turn (clockwise) each time the film advances to the next exposure, thus providing flash for 4 exposures if a fresh cube is in place. If a partially used cube is in place, a fresh bulb must face forward; if a second fresh bulb is facing toward the Kodak nameplate on top of the camera, it will rotate into position as film i$ advanced. The cube can also be rotated by *IMPORTANT: Do not obstruct rotation of the flashcube. 15 hand to bring any fresh bulb to its frontal firing position. Remove a flashcube by lifting it out of the socket. * Set Distance— Rotate the lens mount until the two rangefinder images coin- cide, or until the figure representing the camera-to-subject distance in feet is opposite the focusing mark. Distance limit, 25 feet for flash. s View Subject—Look through the eyepiece and compose the picture within the luminous viewframe of the viewfinder. * Take Picture—Hold the camera steady and slowly press the shutter release to flash the bulb* and take the picture. AUTOMATIC FILL-IN FLASH When flash is used in combination with available light (fill-in flash) the elec- tric eye determines the lens opening on the basis of available light at 1/40 second, and the flash exposure control determines the lens opening on the basis of the distance setting in the 3 to 25 foot range. The smaller of the two openings 15 automatically set when taking the picture. At short subject dis- tances or relatively low available light levels, fill-in flash will produce better lighted pictures, especially of side- or back-lighted subjects. *Flash failure usually results from tarnish (often invisible) on battery and camera con- tacts. Clean battery and battery clip contacts with a rough cloth. Clean recessed contacts in battery compartment by rotating a pencil eraser several times against the contacts, If flash failure persists after cleaning, install fresh batteries, 18 CARE OF THE CAMERA Your KODAK INSTAMATIC is a fine, ragecdly built camera, but yet a precision instrument. Pro- tect it from dust and dirt and avoid rough handling, Use a rub- ber syringe to blow out any dust that may accumulate inside the camera. If the lens needs clean- ing, first brush or blow away any grit or dust, then wipe the surface gently with Konak Lens Cleaning Paper. If necessary, use KODAK Lens Cleaner. Do not attempt to make any repairs or remove any parts from the shutter, lens, or camera. Never oil the shutter or any other parts of the camera. GUARANTEE Within a year after purchase, any repairs necessary to this KODAK INSTAMATIC Camera due to a defect in materials or workman. ship will be made or, at our option, the cam- era will be replaced without charge. No other warranty or guarantee, express or implied, shall be applicable to this equipment. Nor are we responsible for loss of film, for other ex penses or inconveniences, or for any conse: quential damages occasioned by the equip: ment. In case of a defect, the camera can be sent directly or through a Kodak dealer to Eastman Kodak Company or a repair firm authorized by us to make such repairs.® It should be accompanied by a description of the trouble encountered and other available information regarding the camera, including the date and place of purchase. "Kodak service facilities, with addresses, are described on the following page. EASTMAN KODAK COMPANY Rochester, New York 14650 If your Kodak camera should require attention, complete service facilities are provided at Rochester and in Kodak Regional Sales Divisions at the addresses opposite. Also, service covered under the guarantee is available through independent service shops in many cities. For such local, guarantée-covered sarvice, please See your Kodak dealer or refer to the yellow pages of your tele phone directory under Photo- graphic Equipment and Sup plies—Factory Approved War- ranty Service, SERVICE FACILITIES— Eastman Kodak Company Apparatus Service 800 Lee Road Rochester, New York 14650 Eastman Kodak Company Apparatus Service 1901 West 22nd Street Jak Brook, Iilinois 60523 Eastman Kodak Company Apparatus Service 1400 Hi Line Drive Dallas, Texas 75207 Eastman Kodak Company Apparatus Service 5315 Peachtree Industrial Blvd, Chamblee, Georgia 30005 Eastman Kodak Company Apparatus Service 3250 Van Mess Avenue San Francisco, California 94119 Eastman Kodak Company Apparatus Service 1334 York Avenue Mew York, Mew York 10021 Eastman Kodak Company Apparatus Service 12100 Rivera Road Whittier, California 40606 Eastman Kodak Company Apparatus Service 1065 Kapiolani Blvd, Honolulu, Hawaii 96807 19 ">
/
Preuzimanje
Samo prijateljski podsjetnik. Dokument možete pogledati ovdje. Ali što je najvažnije, naš AI ga je već pročitao. Može objasniti složene stvari jednostavnim riječima, odgovoriti na vaša pitanja na bilo kojem jeziku i pomoći vam da brzo navigirate čak i najdužim ili najkompliciranijim dokumentima.
Oglas