Kodak Pocket Instamatic 30 Instructions
PDF
દસ્તાવેજ
જાહેરાત
જાહેરાત
warranty
Within a year after purchase, any repairs necessary to this Kopar
INSTAMATIC Camera due to a manufacturing defect will be made, or at our
option, the camera will be replaced without charge. No other warranty,
express or implied, shall be applicable to this equipment. Nor are we re-
sponsible for loss of film, for other expenses or inconveniences, or for any
consequential damages occasioned by the equipment.
In case of a manufacturing defect, the camera should be sent through
your photo dealer or directly to Eastman Kodak Company or a repair firm
authorized by us to make such repairs. It should be accompanied by a
description of the trouble encountered and other available information
regarding the camera, including the date and place of purchase,
EASTMAN KODAK COMPANY
Consumer Markets Division » Rochester, New York 14650
KODAK, IHSTAMATIC, VERICHROME, KobAcoLôon, KODAEHROMEX, EXTACHROM E-X,
Congratulations! You've just joined millions of Kodak camera owners who
have fun taking pictures. At Kodak, we know how important your pictures
are to you. To help make them the best possible pictures, we hope that
vou'll read this manual thoroughly. о |
With your new camera, you enter the exciting world of cxisting-light
photography. In any light, the electronic shutter automatically times each
exposure. When taking pictures in low-light levels, a red light will appear in
the viewfinder as you press the shutter release. This indicates an exposure
too long for vou to hold the camera in your hand. For these exposures,
follow the instructions on pages 8-10 and you can take pictures like this
without flash:
Chances are you've never used a TES SLY JAS
camera with an electronic shutter
before, so be sure to follow the in-
structions carefully. TE you don't,
your pictures will be blurred.
If you feel that you need help or advice on using your camera, please
write to our staff of photographic experts at: Eastman Kodak Company,
Photo Information, Dept. 841, 343 State Street, Rochester, New York
Lumenizeo, and Carousel are trademarks. | se ——— —— 14650. (Should your camera ever require service, the warranty and instruc-
Pt. No, 636120 в 7
tions for obtaining service are printed at the back of this manual.)
10-71-AGE Printed in the United States of America
Optional case (page 20) - |
Equipment subject to minor appearance changes.
FILM Al
Insert film cartridge to load
camera (page 4). (Note EXPO-
SURE-CONTROL BATTERY—battery-
check instructions on page 18.)
Close back cover.
to use your camera, simply do this...
FILM ADVANCE
Press SHUTTER RELEASE once
before advancing film. Then push
FILM ADVANCE repeatedly until
first exposure locks in place
(page 3).
With built-in lens cover opened
(page 6), aim through eye-level
viewfinder for bright, clear image
of your subject (page 9).
...Teadon for
important instructions
Hold camera steady and slowly
depress shutter release—if red in-
dicator light in viewfinder comes
on, place camera on firm support
(page 10) or insert magicube.
Smoothly depress shutter release
to take picture.
NEVER FORCE ANY CAMERA OPERATION; CHECK INSTRUCTIONS FOR OPERATION.
«al Your camera takes all three—
2 Color prints
3 Color slides
1 Black-and-white prints
Your camera uses film in the 110 cartridge for
Before you take any
especially important
pictures, try a car-
| tridge of film to
check the camera
and your operation
of it. Expose pictures
outdoors and also
indoors with flash. If
time is pressing, à
cartridge of black-
| and-white film can
| be processed very
quickly.
Kodak films instant loading and unloading. Select a film for the
type of picture you want.
Type of No. of Kopax
Pictura Kopax Film Produces Exposures Processing Maller
315 x 4% -inch
EHE VERICHROME | black-and-white 19 Order from Na
Prints Pan prints or dealer om
enlargements
315 x 44-inch
Color Ko т calor prints or is pCR bp12
Prints DACOLOR 5 x 7-Inch color 20
enlargements or DP20-3R
Color slides purchase
KODACHROME-X| mounted in | 20 Pr aca]
Color 30mm x 30mm | :
Slides plastic mounts em pt Fur
: Kod f
EXTACHROME-X Lyi scm = from dealert
*Duplicate slides or color prints available from original slides.
tColor films processed and mailed to address you specify.
35] LATCH
Open hinged back cover by
depressing the LATCH and lower-
ing the cover.
After removing the 110 car-
tridge from its box and protective
wrapping, insert the cartridge in-
to the camera as shown. Close the
cover by pressing it against the
camera body until it locks. (The
film name and number of expo-
sures appear ın the WINDOW In
the cover.)
FILM ADVANCE
Press SHUTTER RELEASE once.
Then push the FILM ADVANCE re-
peatedly with your right thumb
until the advance locks (about 6
full strokes). You will see arrows
in the window as you advance the
film. The number that you see
SENYES as an EXPOSUTE counter.
IMPORTANT: Always operate the film
advance until it locks, or you cannot
depress the shutter release.
wrist strap
A removable WRIST STRAP, pro-
vided for your carrying conve-
nience, is furnished with the cam-
era. Attach the strap to the WRIST-
STRAP CLIP. (Keep the wrist strap
behind the front edge of the cam-
era, especially when you take ver-
tical pictures.)
WINDOW
КОАО El
Fie il | e E
|
NS COVER (CLOSED)
UL WARNING a |
VIEWFINDER
gere
LENS COVER (FULLY OPEN)
built-in lens cover
Your camera has a built-in, slid-
Ing LENS COVER to protect the
lens, Whenever the lens cover is
not completely open, a WARNING
FLAG appears in the VIEWFINDER.
To open the lens cover, slide it
away from the viewfinder,
IMPORTANT: If the warning flag
appears In the viewfinder before
you press the shutter release, the
lens cover is not completely open.
Slide the lens cover toward the
viewfinder to protect the lens
when you are not using your
camera.
atore camera and film away from
heat and direct sunlight—never
in glove compartment, on rear-
window shelf, or other "hot-spot™
in a car.
double-exposure
prevention
You never lose a picture by dou-
ble exposing a frame. After tak-
ing a picture, you must operate
the film advance until it locks, or
you cannot take another picture.
Your vacation pictures will bea more
interesting If vou include close-up
pictures of people. Take them as
close to the subject as 5 fest.
NOTE: The color films listed on page 3
are Intended primarily for daylight or
blue-flash illumination. Pictures taken
by tungsten light may appear orange;
pictures by fluorescent light may ap-
pear green.
automatically timed
exposures—in any light
Your camera's electronic shutter
is set automatically by the amount
of light existing in a scene. The
shutter speed ranges from 1/150
second to 10 seconds or longer
{lower light levels require longer
exposure times), The cameras in-
dicator light comes on when the
exposure is longer than 1/30 sec-
ond (the light remains on during
exposure). When the indicator
light comes on, you have a choice
—1) insert a magicube (page 12),
or 2) place the camera on a tri-
pod or other firm support for a
long exposure (page 10).
To get well-exposed pictures,
don't cover the ELECTRIC EYE,
and don’t point the camera di-
rectly toward the sun or other un-
usually bright light source. Other-
wise, exposures will be incorrect.
taking the picture
e Keep at least 5 feet from your
subject for sharp pictures.
e Bring the rear opening of the
viewfinder close enough to your
Fr
LUMINOUS FRAME
INDICATOR LIGHT
VIEWFINDER
eye to see all four sides of the
LUMINOUS FRAME in the finder.
Then frame your subject (within
the luminous frame) the way you
want it to appear in your picture.
With the rectangular 110-film
format, compose your pictures
horizontally or vertically by hold-
ing the camera as shown on page
10 (keep your hands behind the
front edge of the camera).
a Hold the camera steady and
slowly depress the SHUTTER RE-
LEASE. If the INDICATOR LIGHT
does not come on, smoothly press
the shutter release all the way
down to take the picture.
For
Horizontal
Pictures
IMPORTANT: If the indicator
light comes on, place your cam-
era on a tripod, a solid, flat sup-
port such as a table or wall (keep
the camera near the edge so the
support won't be in your picture),
or the optional Kopag Compact
Camera Stand (with cable re-
lease), Install a cable release in
the CABLE-RELEASE SOCKET. Then
hold the camera firmly on its sup-
port, press and hold the cable re-
lease (or shutter release) until the
indicator light goes ouf. Any cam-
era or subject movement during
exposure will cause blurred pic-
tures.
a Push the film advance with
your right thumb until it locks
(114 strokes). To be ready for the
next picture, hold the camera at
eye level while advancing the film.
FILM ADVANCE
IMPORTANT: Do not hold your
finger on the shutter release while
you advance the film.
11
12
flash pictures
Your camera features easy, rapid,
flash picture-taking with the self-
powered magicube. As you ad-
vance the film, the cube rotates
counterclockwise to bring one of
its four bulbs into firing position.
When you make flash pictures,
the camera-to-subject distance
must be between 5 and 10 feet
with all the films listed on page 3.
IMPORTANT: Be sure to use only the
self-powered magicube. You will dam-
age your camera if you try to use
battery-powered flashcubes.
"ei
Insert magicube— Insert a cube
into the socket on top of the cam-
era; then press down on the cube
until it snap-locks in place. (If a
used bulb faces forward, rotate
the cube until a fresh bulb faces
forward.) To remove a cube, sim-
ply lift it off the camera.
‚оной
о
Check the distance—The cam-
era-to-subject distance is very im-
portant for proper flash exposure.
If you are closer than 5 feet, your
subject will appear very light
(overexposed) and unsharp in the
picture; farther than 10 feet,
your subject will appear dark in
the picture. Therefore, make sure
thar your subject is no closer than
5 feet or farther than 10 feet from
the camera.
Take the picture—View your
subject by bringing the rear open-
ing of the viewfinder close enough
to your eye to see all four sides of
the luminous frame in the finder.
10 ft
А
REC Corr E Like
E EB = = % Grec 2
¡PEPA Flash = exposure
' 44 CAposure
Then frame vour subject the way
you want it to appear in your pic-
ture. Hold the camera steady and
slowly press the shutter release to
flash the bulb and take the picture
(the WARNING FLAG will appear in
the finder as the bulb flashes).
13
Then advance the film to the next
exposure (the magicube will ro-
tate automatically to bring an-
other bulb into firing position).
NOTE: When taking flash pictures, dis.
regard the indicator light. With a magi-
cube in the socket, the shutter speed
E Set automatically for flash, and no
extended exposures will occur.
Used-Bulb Warning—When a used
bulb faces forward, a WARNING
FLAG will appear in the viewfind-
er as you press the shutter release.
To observe this signal, it 15 very
important that you press the shut-
ter release very slowly.
Fill-In Flash—When you take pic-
tures outdoors in bright sunlight,
shadows may appear on the faces
of vour subjects. To help lighten
these shadows, place a magicube
on the camera, check the distance
(5 to 10 feet), and then take the
picture.
WARNING FLAG
“J
NOTE: Under some circumstances,
your subjects" eyes may appear red in
flash pictures. Te minimize this, turn
up the room lights, have subjects look
slightly away from flash, and insert the
optional Kobax Magicube Extender
(see page 20) into the cube socket.
This raises the cube to minimize
the red reflections, and also produces
pleasing shadow effects in your flash
pictures.
unloading camera
When you have taken the last
picture on a cartridge, operate
the film advance (about 6 full
strokes) until you feel a stiff re-
sistance on the advance. De Net
Force the Advance Any Farther.
(Backing paper will still be visible
in the camera window.) Open the
camera cover and remove the car-
tridge. De Not Open the Cartridge
or Your Pictures Will Be Ruined.
NOTE: Removing and replacing par-
tially exposed cartridges, even under
darkroom conditions, will result in the
loss of at least one exposure.
15
film processing
For best results, have your ex-
posed film processed as soon as
possible. Have your photo dealer
arrange for processing (by Kodak
or other laboratory) or purchase
the appropriate Kopak Prepaid
Processing Mailer from your
dealer (see chart on page 3).
Standard color prints from
KopacoLor II Film are 3% X
414 inches, with the frame num-
ber and processing date photo-
graphically printed in the margin.
Kodak Processing Laboratories
will return KopacoLor II Mega-
tives (strips of 4) in à protective
sleeve with an attached form for
ordering extra prints or 5 x 7-inch
enlargements.
Slides from KODACHROME-X
and EKTACHROME-X Films are
returned from Kodak Processing
Laboratories in a protective wal-
let. Each slide is mounted in a
30mm x 30mm plastic mount,
with frame numbers visible in an
opening in the mount. Two
“sticks” (plastic holders) hold ten
slides each for storage or view-
ing. Duplicate slides and color
prints are available from your
original color slides.
For best results, project your
slides with a KODAK Pocket
CAROUSEL Projector (120 slides
per fray). You can also use a
KoDAK CAROUSEL Projector if
you insert each 110 slide in a
KoDAK 2 X 2 Adapter for 110
slides.
camera care
With proper care and handling,
your camera will provide years of
enjoyment. When you carry the
camera in your pocket or purse,
close the lens cover to protect the
lens.
Clean the picture-taking and
viewfinder lenses when necessary
by blowing away any dust or dirt.
Then breathe on the surfaces and
wipe them gently with a soft,
clean, lintless cloth (or use KODAK
Lens Cleaning Paper moistened
with Kobag Lens Cleaner).
17
18
exposure-control battery
To power the camera's indicator
light and electronic shutter, a
size K battery is supplied installed
in your camera. Replace the bat-
tery after about a year of use
(mark the date on a new battery
when you install it).
cleaning battery
Open the back cover of the
camera.
Push the battery down and to-
ward the center of the camera to
free it from its retainer; remove
the battery. Clean the contact
surfaces of the battery with a
rough cloth. Reinstall the battery,
using the diagram on the cover as
a guide,
T_T
EXPOSURE-CONTROL BATTERY
checking battery
Before you insert a cartridge of
film, check the battery condition.
Close the lens cover.
Push the film advance as far as
it will go and allow it to return.
With the camera's back cover
open, look at the shutter while
you depress and hold the shutter
release for about 5 seconds.
If the battery is good, the shut-
ter will remain open until you
remove your finger from the re-
lease. If the battery is weak or
dead, the shutter will open and
close immediately (1/180 sec-
ond); install a new battery. (Open
the lens cover before you take a
picture.)
NOTE: If the indicator light does not
come on when you are taking pictures
under low-light levels, the battery
probably is bad and should be cleaned
or replaced. To change the battery
when the camera is loaded, open the
back cover. Hold the cartridge in place
with one hand as you change the bat-
tery with the other hand. Do not lift
the cartridge away from the camera or
you will lose a frame of film. Close the
back cover and advance the film to the
next frame.
photo aids . .. see your photo dealer
Kopak Pocket INsTAMATIC Camera
Case, Model A—A convenient
way to carry your camera. Attach
to your belt, or use cameras
wrist strap tO Carry Camera.
KobAK Compact Camera Stand
(with cable release) —The stand
screws into the camera's tripod
socket to hold the camera firmly
during long exposures. A cable
release (supplied) stores in the
base of the stand.
Kopak Magicube Extender—In-
creases separation between magi-
cube and camera lens to reduce
red reflections from subjects’
eyes. Often produces more pleas-
ing shadow effects to enhance
your flash pictures.
Kopak Publicatiens—keys to snap-
shot fun are found in Picture the
Fun with Your KODAK
INSTAMATIC® Camera. Your
photo dealer will be glad to show
you this and many other inexpen-
sive books on photography.
KOoDAK Pocket CARQUSEL Prejectors
—Show your 110-size color slides
big, bright, and sharp on the
screen. Up to 120 slides can be
stored in a single Pocket
CAROUSEL 120 Slide Tray.
Kopak 2 x 2 Adapter for 110
Slides—Adapts your slides for
showing with projectors accept-
ing 2 x 2-inch slide mounts, such
as the KopaK CARCUSEL Projec-
tors. Use one adapter for each
slide.
helpful hints for better pictures
Taking pictures with your camera
with the many fine pictures you ta
is fun and easy. We believe you'll be happy
ke with it. If occasionally one of your pictures
isn't all that you expected, refer to the chart below. When you know what went
Wrong, you can make sure
that it won't happen again.
What Happened Probable Cause en
- a) Observe war
“cie рен VTT viewfinder (page 6). e
d wrist strap
bi Hand, fingers, oF weiss b) Keep both Hands an
ac in front of lens. behind front of camera.
e) Camera support ce) Keep camera close bo edge
obstruzted lens. of support.
pictures a) Weak oc dead battery. a) Check battery (page 13).
too dark b} Battery needs cleaning. b) Clean battery {page 18).
c) Shutter release not held down | с) Observe indicator light (page 9)
until indicator light went out. =
lectric aye int o
pietu Electric eye obstructed Make Sure @ ructed
ue € during picture-taking. by fingers or other object. ъ
What Happened Probable Cause Correction
Flash pictures a) Subject too far a) Subject must be no farther than 10 feet
too dark, from flash. from flash (page 13). DO NOT WASTE
FILM ON GREATER DISTANCES.
b) Weak or dead battery. b) Check battery (page 19).
Flash pictures Subject too close to Subject must bé at least 5 fact
too light. flash, from flash (page 13).
Flare in flash Hand or fingers too Keep both hands behind front
pictures, clogs to lens, of camera.
Red refle=tions
in subject's ayes.
Pictures blurred.
Foggy, misty pictures.
Subject not centered
or partly cut off.
Subject locked directly
at flash.
a) Camera movement.
b) Subject movement.
c) Too close to subject
for proper focus.
Dirty camera lens.
Improper Use of finder,
Have subject lock slightly away from flash:
tura up reom lights; install optional Kopar
Magicube Extender in cube socket,
a) Hold camera steady; press shutter
rebeasy slowly,
Bb) Subject should be stationary, or can be
maving very slowly in bright sunlight.
E) Keep at least 5 fest from subject
(page 3).
Civan lens (page 17.
View subject withan luminous frame
of viewfinder (page 9).
24
service facilities
dak camera should require service, complete facilities are pro-
ao: and at Kodak Regional Marketing and Distribution
Centers. Also, service covered under the warranty 15 available through in-
dependent service shops in many citi
service, please sec your photo dealer
es. For such local warranty-covered
or refer to the yellow pages of your
telephone directory under Photographic Equipment and Supplies—Retail
(Kodak Factory-Approved Warranty Service).
Ezsiman Kodak Company, Central Equipment
tervice Center, 800 Lee Road, Rochester,
New York 14650
Eastman Kodak Compañy, Regional Equipment
Service Center, 1801 West 22nd Street, Oak
Brook, Iiinols 60521 |
Eastman Kodak Company, Regional Equipmen
Service Center, 2800 Forest Lane, Dallas,
Texas 75234 si
Eastman Kodak Company, Regional ритейл
Service Center, 5315 Peachtree Industrial
Bivd., Chamblee, Georgia 30341
Eastman Kedak Company, Regional Equipment
Service Center, 8100 Alcosta Blvd, San
Ramon, California 94583
Eastman Kodak Company, Regional Equipment
Service Canter, 1334 York Avenue, Mew York,
Mew York 10021 le
Eastman Kodak Company, Regional cquipmen
service Center, 12100 Rivera Road, Whittier,
California 90606 i? :
Eastman Kodak Company, Regional Equipmen
Service Center, Р.О. Box 1260, Honolulu,
Hawaii 96807
technical details
Film Size—110 cartridge; 12 or 20
exposures producing 13mm x
17mm negatives or transparen-
cies.
Film Advance—=Two-stroke thumb
advance on bottom of camera.
Film Speeds—
Negative films—ASA 32-125
Reversal films—ASA 40-80
Lens—LUMENIZED, 25mm, f/9.5
triplet lens; fixed focus—5 feet to
infinity.
Lens Cover—3Sliding, built-in cover
with signal ın viewfinder for
closed lens cover.
Shutter—Electronic (1/180 sec-
ond to 10 seconds or longer); bat-
tery-powered (size K); with cable-
release socket.
Flash—Self-powered magicubes;
cube rotates as film advances;
flash distances—5 to 10 feet.
Viewfinder—Projected frame;
warning flag for used bulb or
closed lens cover; indicator light
for exposures longer than 1/30
second (use firm support).
Construction—Plastic with metal
and vinyl panels; tripod socket;
clip for wrist strap.
">
/
ડાઉનલોડ કરો
માત્ર એક મૈત્રીપૂર્ણ રીમાઇન્ડર. તમે અહીં જ દસ્તાવેજ જોઈ શકો છો. પરંતુ સૌથી મહત્વપૂર્ણ બાબત એ છે કે, અમારા AI એ તેને પહેલેથી જ વાંચી લીધો છે. તે જટિલ બાબતોને સરળ શબ્દોમાં સમજાવી શકે છે, કોઈપણ ભાષામાં તમારા પ્રશ્નોના જવાબ આપી શકે છે અને તમને સૌથી લાંબા અથવા સૌથી જટિલ દસ્તાવેજોને પણ ઝડપથી નેવિગેટ કરવામાં મદદ કરી શકે છે.
જાહેરાત