Naxa NDC-404 User manual
Add to my manuals
2 Pages
Naxa NDC-404 is an action camera that allows you to capture your adventures in stunning Full HD resolution. With its waterproof housing, you can take it with you wherever you go, from the beach to the ski slopes. The camera also features a variety of shooting modes, including time-lapse and burst photo, so you can capture the perfect shot every time.
advertisement
▼
Scroll to page 2
NDC 404 User Manual v1.0 ® THE NEW GENERATION IN TECHNOLOGY Action Camera Wi-Fi - Waterproof - FullHD HDOUT Full HD Waterproof 1.5 Ноигв to 30m SUPPORT Please visit us on the web at www.naxa.com to get up to the minute news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support. NAXA Technical Support 2320 East 49th St. Vernon, CA 90058 http://www.naxa.com/supportcenter/ E Made in China THE BASICS Microphone Micro USB Port Power/Mode Button Charging Status Light microSD Slot Lens Shutter/Select Button Up/Playback Button Screen Speaker Down/Wi-Fi Button GETTING STARTED To power ON: Press the Power/Mode Button. To power OFF: Press and hold the Power/Mode Button. OVERVIEW Turn the camera ON and repeatedly press the Power/Mode Buttonto cycle through camera modes and settings. The modes will appear in following order: Setting ACCESSORIES Waterproof Handle Bar/ Housing Pole Mount Mount 1 Mount 2 Mount 3 Mount 4 Mount 5 Mount 6 > co Ls | 3 | | | Helmet Mount 7 Clip 1 Clip 2 Mounts Bandages Battery Lens Cloth Tethers К” oe] a Protective Backdoor USB Cable Charger CM Video Record Video KY Photo Capture a single photo Jj Burst Photo Capture photo bursts . Shoota series of photos at Cia Time Lapse р set time intervals [e Adjust camera settings, resolution and more Press the Shutter/Select Button to enter the settings menu. Repeatedly press thePower/Mode Button to cycle through options and press the Shutter/Select Button to select desired option. Or use the Up/Playback or Down/Wi-Fi Button to cycle through the various options. MOUNTING YOUR CAMERA Attach your camera to helmets, gear and equipment. Video Resolution: 1080p 30 fps / 720p 30 fps Looping video: off/on Time Stamp: Off/Date/Date 8: Time Exposure: +-2.0/+-1.7/+-1.3/+-1.0/+-0.7/+-0.3/0 Photo Resolution: 12M, 8M, 5M, 2M Burst Photo: 3 Photos Time Lapse: 2s/3s/5s/10s/20s/30s/60s Continuous Lapse: Off/On Power Frequency: 50Hz/60Hz/Auto Language: English /Traditional Chinese/Italian /Spanish/Portuguese/German/Dutch/ France/Czech /Polish/Turkish/Russian/Japanese/Korean/Thai Date & Time: MM/DD/YY, DD/MM/YY, or YY/MM/DD Sound Indicator: Shutter On/Off, Start Up 1/2/3/, None, Beep On/Off, Volume 0/1/2/3 Rotate Display: On/Off # + = a 7 & Screen Saver: Off/1 min/3 min/5 min Power Saver: Off/1 min/3 min/5 min Format: No/Yes Reset: No/Yes Version: Displays current firmware version VIDEO MODE CN Video To record Video, verify the camera is in Video mode. If the Video icon on your camera’ s LCD screen is not showing, press the Power/Mode Button repeatedly until it appears. To start recording: Press the Shutter/Select Button. The camera will emit one beep and the Camera Status Lights will flash while recording. To stop recording: Press the Shutter/Select Button. The Camera Status Lights stop flashing and the camera emits one beep to indicate recording has stopped. This camera automatically stops recording when the battery is out of power. Your Video will be saved before the camera powers OFF. PHOTO MODE KY Photo To capture a Photo, verify the camera is in Photo mode. If the Photo icon on your camera’ s LCD screen is not showing, press the Power/Mode Button repeatedly until it appears. To take a photo: Press the Shutter/Select Button. The camera will emit the camera shutter sound. BURST PHOTO MODE EI; Burst Photo To capture a Burst Photo series, verify the camera is in Burst Photo mode. If the Burst Photo icon on your camera” s LCD screen is not showing, press the Power/Mode Button repeatedly until it appears. In Burst Photo mode, your camera takes 3 photos in 1.5 seconds. The iSmart DV Appis compatible with smartphones and tablets listed below: For Apple iOS * ¡Phones, 5s, 6 (Plus), & 65 * ¡Pad Air & Mini (i0S9) For Android * Android 4X Quad-core devices COMPATIBILITY Compatibility varies by device. Content playback, sharing and access to the camera” s memory card might be not available on some devices. To take a Burst Photo series: Press the Shutter/Select Button. The camera will emit camera shutter sounds. TIME LAPSE MODE Cy Time Lapse To capture a Time Lapse series, verify the Continuous Lapse is ON and camera is in Time Lapse mode. If the Time Lapse icon on your camera’ s LCD screen is not showing, press the Power/Mode Button repeatedly until it appears. In Time Lapse mode, your camera captures a series of photos at 2, 3, 5, 10, 20, 30 or 60 second intervals. The intervals at which the camera will operate in Time Lapse mode must first be set using the settings screen before recording in Time Lapse mode. To take Time Lapse: Press the Shutter/Select Button. The camera initiates countdown and emits the camera shutter sound each time a Photo is taken. FCC NOTICE Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. a Increase the separation between the equipment and receiver. a Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. a Consult the dealer or an experienced radio/TV technician for help. QUICK MODES To enter the Quick Modes menu 1.Verify the camera is in Camera modes. 2.Press and hold the Shutter/Select Button for three seconds. 3.Repeatedly press the Power/Mode Button to cycle through camera modes. 4 Press the Shutter/Select Button. 5.To exit, hold down the Shutter/Select Button for these seconds 6.Press the Shutter/Select Button. 7.To return to the Playback menu, press the Power/Mode Button. 8.To exit, hold down the Up/Playback Button for two seconds. STORAGE/MICRO SD CARDS PLAYBACK Playing Back Videos and Photo To enter the Playback menu: 1.Verify the camera is in Camera mode. 2.Press the Up/Playback Button to enter the Playback menu. 3.Repeatedly press the Power/Mode Button to cycle through Video and Photo. 4 Press the Shutter/Select Button to select desired option. 5.Use Up/Playback Button or Down/Wi-Fi Button to cycle through the various options. This camera is compatible with 8GB,16GB and 32GB capacity microSD, microSDHC, and microSDXC memory cards. You must use a microSD card with at least a Class 10 speed rating. We recommend using brand name memory cards for maximum reliability in high-vibration activities. BATTERY Charging The Battery 1. Connect the camera to a computer or USB power supply. 2. The Charging Status Light remains ON while the battery is charging. 3. The Charging Status Light will turn OFF when the battery is fully charged. Charging Time: 3.5 hours CAMERA APP Connecting to the ¡Smart DV App The iSmart DV Applets you control your camera remotely using a smartphone or tablet. Features include full camera control, live preview, photo playback and sharing of select content and more. 1. Download the iSmart DV App to your smartphone or tablet at the Google Play or Apple App Store. 2. Press the Power/Mode Button to power camera ON. 3. Make sure the camera is in Camera mode. 4. Press the Down/Wi-Fi Button to turn on Wi-Fi*. 5. In your smartphone or tablet' s Wi-Fi settings, connect to the network called “iSMART-NDC-404" followed by a series of numbers. 6. Enter the password “1234567890” . 7. Open the iSmart DV App on your smartphone or tablet. * Press and hold the Down/Wi-Fi Button for three seconds to turn OFF Wi-Fi.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
How to power on the camera?
Press the Power/Mode button.
How to take a photo?
Verify the camera is in Photo mode and press the Shutter/Select button.
How to capture a burst photo?
Make sure the camera is in Burst Photo mode and press the Shutter/Select button.
How to record a video?
Verify the camera is in Video mode and press the Shutter/Select button.
How to enter the Playback menu?
From Camera mode, press the Up/Playback button.
What is the maximum capacity of microSD card that the camera supports?
The camera supports microSD, microSDHC, and microSDXC memory cards with capacities up to 32GB.
How to connect the camera to the iSmart DV App?
1. Download the app, 2. Turn on the camera and make sure it's in Camera mode, 3. Press the Down/Wi-Fi button to turn on Wi-Fi, 4. Connect to the Wi-Fi network named 'iSMART-NDC-404', 5. Enter the password '1234567890' , 6. Open the iSmart DV App.