Nero BackItUp Instructions

Nero BackItUp Instructions
Manual
Nero BackItUp
Copyright and Trademark Information
This document and all its contents herein are subject to and protected by international copyright and other intellectual property rights
and are the property of Nero AG and its subsidiaries, affiliates or licensors. All rights reserved. No part of this document may be
reproduced, transmitted or transcribed without the express written permission of Nero AG. All trade names and trademarks and/or
service marks are the property of their respective owners. The trademarks mentioned are expressly named for information purposes
only. Nero AG rejects any claims that transcend the clauses of the guarantee rights to the fullest extent. Nero AG does not undertake
any liability for the correctness of the content of this document. The contents of the software supplied, as well as of this document,
may be changed without prior warning. Some applications of the Nero Suites require technologies developed by third-party manufacturers. Some of these are included as a trial version in this suite. These technologies need to be activated online (free of charge) or
by sending an activation fax to have unlimited use of the version. Nero will then undertake to release the data necessary to activate
technologies licensed by third-party manufacturers for unlimited use with Nero 11 or Nero 11 Platinum. It is therefore necessary to
have an Internet connection or a fax machine.
Unless you own the copyright or have permission from the copyright owner, you may be violating national or international copyright
laws and be subject to payment of damages and other remedies, if you duplicate, reproduce, modify, or distribute copyrighted
material. If you are unsure of your rights you should contact your legal advisor.
Copyright © 2011 Nero AG and its licensors. All rights reserved.
Nero, Nero BackItUp, Nero Burn, Nero Burning ROM, Nero CoverDesigner, Nero Digital, Nero Express, Nero Kwik Media, Nero Kwik
Backup, Nero Kwik Blu-ray, Nero Kwik Burn, Nero Kwik DVD, Nero Kwik Faces, Nero Kwik Mobile Sync, Nero Kwik Play, Nero Kwik
Photobook, Nero Kwik Places, Nero Kwik Sync, Nero Kwik Themes, Nero Kwik Tuner, Nero MediaStreaming, Nero Recode, Nero
RescueAgent, Nero SmartDetect, Nero Simply Enjoy, Nero SmoothPlay, Nero StartSmart, Nero SoundTrax, Nero Surround, Nero
Video, Nero Video Express, Nero WaveEditor Burn-At-Once, LayerMagic, Liquid Media, SecurDisc, the SecurDisc logo, Superresolution and UltraBuffer are common law trademarks or registered trademarks of Nero AG.
Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the "Powered by Gracenote" logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries. Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories, Inc. Confidential unpublished works. Copyright 2011 Dolby Laboratories. All rights reserved. Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks & DTS Digital Surround, DTS 2.0+Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved. AVCHD and AVCHD logo, AVCHD Lite and AVCHD Lite logo are trademarks of Panasonic Corporation and Sony Corporation. Facebook is a registered trademark of Facebook, Inc. Yahoo! and Flickr are registered
trademarks of Yahoo! Inc. My Space is a trademark of MySpace, Inc. Google, Android and YouTube are trademarks of Google, Inc.
Apple, Apple TV, iTunes, iTunes Store, iPad, iPod, iPod touch, iPhone, Mac and QuickTime are trademarks of Apple Inc. registered
in the U.S and other countries. Blu-ray Disc, Blu-ray, Blu-ray 3D, BD-Live, BONUSVIEW, BDXL, AVCREC and the logos are trademarks of the Blu-ray Disc Association. DVD Logo is a trademark of Format/Logo Licensing Corp. registered in the U.S., Japan and
other countries. Bluetooth is a trademark owned by Bluetooth SIG, Inc. The USB logo is a trademark of Universal Serial Bus Implementers Corporation. ActiveX, ActiveSync, Aero, Authenticode, Bing, DirectX, DirectShow, Internet Explorer, Microsoft, MSN, Outlook, Windows, Windows Mail, Windows Media, Windows Media Player, Windows Mobile, Windows.NET, Windows Server, Windows
Vista, Windows XP, Windows 7, Xbox, Xbox 360, PowerPoint, Silverlight, the Silverlight logo, Visual C++, the Windows Vista start
button, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and other
countries. FaceVACS and Cognitec are either registered trademarks or trademarks of Cognitec Systems GmbH. DivX and DivX
Certified are registered trademarks of DivX, Inc. DVB is a registered trademark of the DVB Project. NVIDIA, GeForce, ForceWare,
and CUDA are trademarks or registered trademarks of NVIDIA. Sony, Memory Stick, PlayStation, and PSP are trademarks or
registered trademarks of Sony Corporation. HDV is a trademark of Sony Corporation and Victor Company of Japan, Limited (JVC).
3GPP is a trademark of European Telecommunications Standards Institute (ETSI) This program includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/) Open SSL is copyright (C) 1998-2005 The OpenSSL
Project. All rights reserved. This program includes cryptographic software written by Eric Young ([email protected]). This program
includes software written by Tim Hudson ([email protected]). Cryptographic software inside Open SSL is copyright (C) 1995-1998
Eric Young ([email protected]). All rights reserved. Adobe, Acrobat, Reader, Premiere, AIR, and Flash are trademarks or registered trademarks of Adobe Systems, Incorporated. AMD Athlon, AMD Opteron, AMD Sempron, AMD Turion, AMD App Acceleration,
ATI Catalyst, ATI Radeon, ATI, Remote Wonder, and TV Wonder are trademarks or registered trademarks of Advanced Micro
Devices, Inc. Linux is a registered trademark of Linus Torvalds. CompactFlash is a registered trademark of SanDisk Corporation.
UPnP is a registered trademark of UPnP Implementers Corporation. Ask and Ask.com are registered trademarks of IAC Search &
Media. IEEE is a registered trademark of The Institute of Electrical and Electronics Engineers, Inc. Philips is a registered trademark
of Koninklijke Philips Electronics.N.V. InstallShield is a registered trademark of Macrovision Corporation. Unicode is a registered
trademark of Unicode, Inc. Check Point is a registered trademark of Check Point Software Technologies Ltd. Labelflash is a trademark of Yamaha Corporation. LightScribe is a registered trademark of the Hewlett-Packard Development Company, L.P. Intel, Intel
Media SDK, Intel Core, Intel XScale and Pentium are trademarks or registered trademarks of Intel Corporation in the U.S. and/or
other countries. MP3 SURROUND, MP3PRO and their logos are trademarks of Thomson S.A.
Other product and brand names may be trademarks of their respective owners and do not imply affiliation with, sponsorship, or
endorsement by owners.
Nero AG reserves the right to change specifications without notice. Use of this product is subject to the acceptance of the End User
License Agreement upon installation of the software. www.nero.com
Nero AG, Im Stoeckmaedle 18, 76307 Karlsbad, Germany
Nero BackItUp
2
Table of contents
1
1.1
1.2
1.3
1.4
1.5
Start Successfully
About the Manual
About Nero BackItUp
Versions of Nero BackItUp
Working With Nero BackItUp
Starting the Program
5
5
5
6
6
7
2
User Interface
8
3
3.1
3.2
About Nero LIVEBackup
Nero LIVEBackup Area
Activating Nero LIVEBackup
10
10
11
4
Backup With Nero BackItUp
14
5
Storing Online With Autobackup
16
6
Backing Up Files
19
7
Back Up Media Library
22
8
Backing Up Drives
24
9
9.1
9.2
Backup Settings Screen
About Backup Types
About the Time Schedule
26
28
31
10
10.1
10.2
Syncing With Nero BackItUp
Syncing Folders
About Sync Types
32
32
34
11
11.1
11.2
Restore With Nero BackItUp
Restore Files and Folders
Restore Drive Backup
37
37
40
12
12.1
12.2
Backup and Restore Expert Options Overview
E-mail Notification
Miscellaneous
42
43
44
13
Manage Your Backup and Sync Job Screen
46
14
14.1
14.2
Tools
Creating Bootable Nero BackItUp ImageTool
Creating Standalone Nero BackItUp SyncTool
49
49
50
Nero BackItUp
3
14.3
Erase Rewritable Disc Window
51
15
15.1
15.2
15.3
15.4
Nero BackItUp Options Overview
Setting Up FTP Server Connection
Remote Proxy
Setting Up E-Mail Account
Creating Filter
53
53
55
56
57
16
16.1
16.2
16.2.1
16.3
16.3.1
16.3.2
16.4
16.4.1
16.4.2
16.5
16.6
Nero BackItUp ImageTool
Starting Nero BackItUp ImageTool
User Interface
Extended Area
Drive Backup
Burning a Backup to Disc
Saving the Backup to a Hard Drive or FTP Server
Restore
Restoring a Drive Backup
Extract Files From Backup
Options Window
Exiting Nero BackItUp ImageTool
60
60
61
62
63
63
64
65
65
66
67
68
17
Nero BackItUp SyncTool
69
18
18.1
Technical Information
System Requirements
70
70
19
Glossary
71
20
Index
72
21
Contact
74
Nero BackItUp
4
Start Successfully
1
Start Successfully
1.1
About the Manual
This manual is intended for all users who want to learn how to use Nero BackItUp. It is
process-based and explains how to achieve a specific objective on a step-by-step basis.
To make best use of this documentation, please note the following conventions:
Indicates warnings, preconditions or instructions that have to be precisely followed.
Indicates additional information or advice.
1. Start …
The number at the beginning of a line indicates a prompt for action.
Carry out these actions in the order specified.
Indicates an intermediate result.
Indicates a result.
OK
(see…)
[…]
1.2
Indicates text passages or buttons that appear in the program interface. They are shown in boldface.
Indicates references to other chapters. They are executed as links and
are shown in red and underlined.
Indicates keyboard shortcuts for entering commands.
About Nero BackItUp
Nero BackItUp is a program for backing up and restoring data. Nero BackItUp saves files
(file backup), as well as programs and operating systems (drive backup).
Open files and even active drives are backed up with the shadow copy feature, while you
continue to work on the file. You can burn the backup to a disc, save it to a hard drive or
removable medium, or use an online storage. With Nero BackItUp you can verify at any time
that the backed up data is complete and correct.
Use Nero BackItUp to schedule backups, e.g. for regular data backups that are executed
automatically. The most convenient way to do this is to set up the Nero LIVEBackup feature,
which automatically backs up your entire system incrementally on a regular basis. You only
need to turn on Nero LIVEBackup once to start an instant and secure backup of your data.
The backup source is per default the whole system, but you can exclude any internal parti-
Nero BackItUp
5
Start Successfully
tion, if you want to. The backup target is found and suggested automatically. The default
schedule is every two hours, but you can also change that of course.
Nero BackItUp ImageTool is another tool for backing up files and drives. The Nero BackItUp
ImageTool is included on the bootable disc that you can create with Nero BackItUp. With the
Nero BackItUp ImageTool, you can back up and restore drives. This particularly lends itself
to backing up on otherwise active drives, since such drives are inactive when booting the
Nero BackItUp ImageTool.
Nero BackItUp SyncTool is a tool for syncing folders. It is created with Nero BackItUp and
stored either on hard drive, removable medium or optical disc. Nero BackItUp SyncTool can
be started from these media on any computer; Nero BackItUp does not have to be installed
to start Nero BackItUp SyncTool.
1.3
Versions of Nero BackItUp
Nero BackItUp is available as part of Nero 11 and as a standalone product.
The application is available in three different versions: Nero BackItUp, Nero BackItUp Essentials and Nero Easy BackItUp Essentials. Nero BackItUp offers the full range of features.
Nero BackItUp Essential does not offer the following features:

Backup and restore expert options

Multiple targets for backups

Advanced encryption

Archive splitting

Extract files from drive backup

Create file filter

Backup with Nero BackItUp ImageTool
In addition, the Nero BackItUp desktop icon may be missing. However, the application can
always be started through the start menu of your computer as well.
Nero Easy BackItUp Essentials offers only the Nero LIVEBackup features.
Features that are not available in Nero BackItUp Essentials are indicated by the
icon.
The icon offers you upgrade possibilities, and gives information about it.
1.4
Working With Nero BackItUp
With Nero BackItUp you can generally backup, restore and sync. Just open the Additional
Tasks area, choose a task and start it. You then complete the task by navigating through the
different steps where a separate screen is displayed for each individual step. You will find a
description in this manual for each screen and each task.
The most convenient way to back up your whole system is to turn on the Nero LIVEBackup
feature. Simply move the slider to On. The backup source is per default the whole system
and the backup target is found and suggested automatically. The backup default schedule is
every two hours. You can change these settings with the Configure button.
Nero BackItUp
6
Start Successfully
1.5
Starting the Program
To start Nero BackItUp, proceed as follows:
1. If you have the desktop shortcut available:
1. Click the
Nero BackItUp desktop icon.
2. If you want to start via the start menu:
1. Select Start (the start icon) > (All) Programs > Nero > Nero 11 > Nero BackItUp.
 The Nero BackItUp window is opened.
Additionally, Nero BackItUp can be started from the Welcome Application.
 You have started Nero BackItUp.
Nero BackItUp can also be opened by clicking the EXE file in the Nero BackItUp
application folder (by default C:\Program Files\Nero\Nero 11\Nero BackItUp).
You can also start Nero BackItUp tasks from the context menu of the Nero BackItUp Agent (indicated by the
icon). The Nero BackItUp Agent is available on
your computer's taskbar. Under Windows 7 you have to open the queue by clicking the triangle.
Nero BackItUp
7
User Interface
2
User Interface
The Nero BackItUp user interface is the starting point for using the Nero LIVEBackup feature, and for backups, restores, syncs, and any other task that you can carry out with Nero
BackItUp.
You can start a task via the links that are provided in the user interface in the Additional
Task area. The header bar gives you the possibility to create a disc with Nero BackItUp ImageTool, to open the disc options, the general options and the help.
The main screen is divided into three areas:

Nero LIVEBackup

Additional Tasks

Job Overview
The single areas can be displayed or closed by clicking the arrow button or the area title.
Start screen
The following icons are available on the top side of the window:
Home
Displays the start screen.
Tools
Provides the options to create a bootable disc including the Nero
BackItUp ImageTool and to create the standalone tool Nero BackItUp
SyncTool. You can also erase a rewritable disc and display disc information.
Nero BackItUp
8
User Interface
Options
Help
Opens the Options window.
Displays help options and the About window, where you can find the
version number of the application.
The following areas are available:
Enables Nero LIVEBackup to automatically back up your whole system
on a regular basis. Backup source and backup target are suggested
Nero LIVEBackup
automatically. You can also add and exclude individual partitions and
define your own time schedule at any time within the application.
Starts with your task:
Additional Tasks
Create a backup: Provides backup facilities such as using Nero Online
Backup (back up data to an online storage), and backing up files and
backing up drives to disc, hard drive or network drive.
Sync: Provides sync facilities such as creating a new sync job.
Manage and Restore: Provides restore facilities such as restoring file
and drive backups. You can also manage your jobs for example activate/deactivate, execute, delete or edit jobs.
Job Overview
Shows the jobs that have been carried out recently, the currently carried out job, and the next job that is planned. You can run, restore or
modify a job. Clicking Show all jobs displays all your jobs.
Nero BackItUp
9
About Nero LIVEBackup
3
About Nero LIVEBackup
The most convenient way to backup your whole system is to turn on the Nero LIVEBackup
feature once. This feature can be found on the Nero BackItUp start screen in the upper area.
Simply move the slider to On to turn it on.
The backup source is per default the whole system and the backup target is found and suggested automatically. The backup default schedule is every two hours. You can change
these settings with the Configure button.
A backup with Nero LIVEBackup is always an incremental drive backup, meaning that the
first backup is a full backup and with the next backup runs only the changes are backed up.
This makes the backup runs very less time consuming. But Nero LIVEBackup offers another
advantage compared to other incremental drive backups: The single backup runs are
merged together after a while. This decreases the restore time and also the backup space.
The exact time span for merging depends on the backup data size, the total target space
and free space on the target and is calculated individually for you.
With Nero LIVEBackup you have an automated, convenient way to back up your whole system that offers the least back up time and, at the same time, lowest backup space and least
restore time possible.
See also
 Activating Nero LIVEBackup →11
3.1
Nero LIVEBackup Area
In the Nero LIVEBackup area you can activate, deactivate, and configure the Nero LIVEBackup feature.
The following setting options are available:
Off-On-Slider
Activates Nero LIVEBackup. The backup starts immediately if all
preconditions are fulfilled.
Moving the slider to the right (On) turns Nero LIVEBackup on. Moving the slider to the left (Off) turns Nero LIVEBackup off.
Displays the best suitable target for the backup.
Information
Destination
Precondition: The target drive can be used and has enough free
space. An external hard drive is preferred.
If no suitable target was found, this is indicated with a warning icon.
The backup will not start in this case.
Displays the suitable source drive for the backup.
Information
Backup Data
The goal is to backup the operating system partition plus as much as
possible internal drives. If all internal hard drives can be backed up
to an external target drive, the term “complete system” is displayed.
If not all internal hard drives can be backed up, this is indicated with
a warning icon.
Nero BackItUp
10
About Nero LIVEBackup
Opens a message explaining the reason for warning.
Information
Last Backup
Information
Status
Button
Run now
Button
Restore
Button
Configure
3.2
Displays date and time of last successful backup run. A click on the
link opens the restore view with the latest backup run preselected.
Only available if at least one backup has been executed.
Gives information on Nero LIVEBackup conditions.
Only available if at least one backup has been executed.
Starts the next backup run manually.
Only available if no backup is running.
Displays the restore screen. The latest backup is preselected.
Allows you to change the backup target, the backup source and the
backup schedule.
Activating Nero LIVEBackup
With Nero LIVEBackup you can back up your whole system automatically in a convenient
way. Once it has been set up, Nero LIVEBackup updates your system backup prior to
changes in the background on a regular basis.
We recommend to connect an external hard drive with enough free space for the backup, if
applicable. Nero BackItUp searches at startup for suitable hard drives and displays the best
fitting target. External hard drives will be preferred but any free target space is also considered relevant. In addition Nero BackItUp searches for data which can be backed up on your
whole system. The objective is to back up the whole system, this means the operating system partition plus as much internal drives as possible. If this is not possible because there is
not enough target space, backing up the operating system partition has the highest priority.
To activate Nero LIVEBackup, proceed as follows:
1. Check the suggestions for the backup target and backup data in the information area on the
right.
2. If you want to choose another target drive, change the backup source, or change the
backup frequency:
1. Click the Configure button.
 The Configure window is opened.
Nero BackItUp
11
About Nero LIVEBackup
Configure
2. Click the Change button to select another backup destination.
 Nero LIVEBackup performs a search for suitable backup targets. All targets are displayed with an explanation about why they are suitable. The best fitting target is preselected.
3. Click the Change button to select other backup sources.
 All connected hard drives are displayed.
4. Enter your desired backup schedule in the input field.
5. Click the OK button.
3. Move the slider to the right to On.
 The slider color changes from red to green. Nero LIVEBackup starts the backup immediately.
Nero BackItUp
12
About Nero LIVEBackup
Nero LIVEBackup is running
 You have activated Nero LIVEBackup. Backup runs will be executed at the defined
schedule.
If the backup target is removed, there will be a warning icon in the status area and
you will be notified that the backup target has been disconnected. Nero
LIVEBackup will, however, continue the backup automatically when the backup
target is reconnected.
Nero BackItUp
13
Backup With Nero BackItUp
4
Backup With Nero BackItUp
With Nero BackItUp you can back up data. The Create a backup area in the Additional
Tasks area is your starting point for choosing a type of backup outside Nero LIVEBackup.
Click within the Create a backup area to get an overview about the backup possibilites.
The following backup tasks are available:
Manage Nero Online Backup
With Nero BackItUp, you can set up and configure Autobackup, the automatic online backup
feature. Once it has been set up, Autobackup is available on your computer's notification
area and backs up specified folders in the background, using the Internet service Nero Online Backup as a backup location.
Setting up Autobackup is particularly useful when you want to carry out regular backups for
the same files and want to have a computer-independent access to your data. The advantages are, e.g. that all the settings for the backup have already been configured and that
there is no risk of forgetting a backup date or of not carrying out a backup as scheduled (as
long as the computer is on). In addition, the safety of your data does not depend on the
physical status of your hard drive.
File backup
If you choose a file backup, the individual files and folders that you select are backed up. If
you want to back up the same files again later, a backup update makes it easier and saves
resources and other things.
A file backup is useful to protect against data loss that can occur due to hardware damage or
force majeure (fire, etc.). As a result, we recommend frequent backups so that you can restore data that is as current as possible in case of loss.
Nero Kwik Media Library Backup
If you choose a Nero Kwik Media library backup, the folders that were indexed by Nero Kwik
Media are backed up. You can select single folders as well as complete categories (Photo,
Video, Music).
Nero BackItUp only backs up the content, meaning the files itself, not the media library database. Created playlists, tags or any other information you can carry out within Nero Kwik
Media (stored in the media library database) are not part of the backup.
Media Library
The media library is a database which contains all your media files that were indexed by Nero Kwik Media. It is designed to be accessed in several Nero applications via Nero MediaBrowser
Nero MediaBrowser and the media library come with Nero Kwik Media and are
installed together. You will find further information in the Nero Kwik Media manual.
Nero BackItUp
14
Backup With Nero BackItUp
Drive backup
If you choose drive backup, entire drives (hard drives and/or partitions) are backed up, including programs and the operating system.
When restoring a drive backup, programs and operating systems are restored, in contrast to
file backup restoring. So, a drive backup is useful to restore the whole operating system plus
programs in case of hardware damage.
See also
 Backing Up Files →19
 Backing Up Drives →24
 Restore With Nero BackItUp →37
Nero BackItUp
15
Storing Online With Autobackup
5
Storing Online With Autobackup
With Nero BackItUp you can set up and configure Autobackup to automatically back up files
and folders online, using the Internet service Nero Online Backup as a backup location.
Once it has been set up, Autobackup is available in the Windows notification area and backs
up the folders that you specify in the background in the defined sequence.
Setting up Autobackup is particularly useful when you want to carry out regular backups for
the same files and want to have a computer-independent access to your data.
In order for Autobackup to be able to carry out the automatic backup process according to
your preferences, configure which file types should be automatically backed up in which
folders and define the backup target.
Nero Online Backup offers you an online data storage (which is subject to
charge). We recommend a broadband Internet connection (e.g. DSL-1000 or
faster) for uploading the files to be backed up. The costs for the Internet connection and the costs for using the Internet service Nero Online Backup are the user's
responsibility.
The update backup method is used for automatic backups made through Autobackup. In this process, the data from the previous backup is overwritten with the
modified data. This means that there are no backup versions, i.e. accessing older
backup versions is not possible.
Files that are deleted from a monitored folder are kept in the backup. If you want
to delete these files from the backup as well, then use the delete feature, which
can be accessed in the Autobackup status screen.
To set up Autobackup, proceed as follows:
1. Click the
Additional Tasks button.
 The Additional Tasks area is displayed.
2. Click the Manage Nero Online Backup entry link in the Create a backup area.
 The Step 1 of 3 – Please select your source screen is displayed.
Nero BackItUp
16
Storing Online With Autobackup
Online Autobackup - Source information
3. Specify which file type you want to backup:
1. Click the
button in front of the file type you want to configure.
2. Select the check box in front of the file extension you want to include in the backup.
3. Clear the check box in front of the file extension you want to exclude from the backup.
4. Select the Add file type check box at the end of the file extension list and enter the file
extension you want to add to the backup.
4. Specify which folders you want to monitor with Autobackup:
1. Select the check box in front of the folder you want to include in the backup.
2. Clear the check box in front of the folder you want to exclude from the backup.
3. Select the Additional Folders check box and click the
button to add your own fold-
ers to the monitoring list.
5. Click the
button.
 If you have not yet subscribed to the Nero Online Backup service or if Autobackup is
turned off, the Step 2 of 3 – Please create a new account or use an existing login
screen is displayed. You can enter your account information here.
Nero BackItUp
17
Storing Online With Autobackup
6. If you already have a login:
1. Enter your Subscription ID and your Password in the input fields.
2. To keep the login information, select the Remember my password check box.
7. If you have not yet subscribed to the Nero Online Backup service:
1. Select the I do not have a Nero Online Backup account and want to subscribe now
option button.
2. Click the
button.
 The Nero Online Backup - Create new account screen is displayed.
3. Choose a backup storage and subscription duration.
4. Choose a password for your account.
5. Enter an e-mail address.
6. Please read the terms and conditions agreement carefully by clicking the Terms & Conditions link. If you agree to the terms of the agreement, select the I have read the
Terms & Conditions check box. A subscription is not possible without your consent to
this agreement.
8. Click the
button.
 The Step 3 of 3 - Autobackup status screen is displayed. You can view your backup
status and your subscription information here and also delete files and folders from your
storage at Nero Online Backup.
9. Click the
button.
 The first full backup of the folders that you have specified is carried out. You can
monitor the progress with the status information in the taskbar. The final screen is
displayed. Autobackup has been set up and carries out the backup updates automatically due to the specified settings.
Turn off Autobackup
If you want to turn off Autobackup, just click the
status screen.
button in the Autobackup
Change settings
If you want to change the settings, just click the Manage and Restore > Manage
backup or sync jobs in the Additional Tasks area and Edit the Automated
Backup.
Nero BackItUp
18
Backing Up Files
6
Backing Up Files
With Nero BackItUp you can carry out file backups. This means that individual files can be
backed up and then restored at a later point in time. In comparison to drive backups, it is not
possible to restore operating systems or programs with this option.
The first step is selecting files and folders to back up.
The next step is to select a target where to save the backup. You can save the backup on
your hard drive or removable data media, burn the backup to a disc or use an online storage.
At last you can make settings according to your preferences.
To backup files, proceed as follows:
1. Click the
Additional Tasks button.
 The Additional Tasks area is displayed.
2. Click the File Backup entry link in the Create a backup area.
 The Step 1 of 3 – Please select your source screen is displayed.
File Backup - Please select what you want to backup
3. Select a folder in the left to show the contained files in the right. Select the check box in
front of the folder or the file that you want to add to the backup.
 The selected files are added to the backup.
4. Click the
button.
Nero BackItUp
19
Backing Up Files
 The Step 2 of 3 – Please select your target screen is displayed.
File Backup - Select targets
5. Click the icon that represents your desired target and specify the target in the drop-down
menu.
6. Click the Browse button to specify the chosen target path.
7. If you want to back up to different targets, click the Add target button and repeat the two
previous steps.
8. Click the
button.
 The Step 3 of 3 – Please select your backup options screen is displayed (see Backup
Settings Screen→ 26).
Nero BackItUp
20
Backing Up Files
File Backup - Configure your backup
9. Enter a name for the backup in the Backup name input field.
10. If you want to schedule this backup or run it on a regular basis:
1. Select the backup schedule type in the Time schedule drop-down menu.
2. Click the Edit button if you want to specify the schedule.
 The Define your time schedule window is opened.
3. Select the start date and other time settings that are appropriate to your backup schedule.
4. Select the backup type used for the following backups in the Select backup type dropdown menu (see Backup Types→ 28).
11. Configure other settings as desired in the Options area.
12. If necessary, specify additional settings in the Expert Options area (see Expert Options
Overview→ 42).
13. Click the
button.
 The file backup is carried out and the final screen is displayed. You can follow the
process status in the task bar.
Nero BackItUp
21
Back Up Media Library
7
Back Up Media Library
With Nero BackItUp you can back up the content of the media library. With this backup type
the folders that were indexed by Nero Kwik Media are backed up. You can select single folders as well as complete categories (Photo, Video, Music).
Nero BackItUp only backs up the content, meaning the files itself, not the media library database. Created playlists, tags or any other information you can carry out within Nero Kwik
Media (stored in media library database) are not part of the backup.
The backup process is similar to a normal file backup:
The first step is selecting categories and folders to back up.
The next step is to select a target where to save the backup. You can save the backup on
your hard drive or removable data media, burn them to a disc or use an online storage.
At last you can make settings according to your preferences.
To backup Nero Media Library content, proceed as follows:
1. Click the
Additional Tasks button.
 The Additional Tasks area is displayed.
2. Click the Nero Kwik Media Library Backup entry link in the Create a backup area.
 The Step 1 of 3 – Please select your source screen is displayed. The folders that were
indexed by Nero Kwik Media are displayed.
Nero Media Library Backup
Nero BackItUp
22
Back Up Media Library
3. Select the check box in front of the file category that you want to add to the backup, or
select the check box in front the folder that you want to add to the backup.
4. Click the
button.
 The Step 2 of 3 – Please select your target screen is displayed.
5. Click the icon that represents your desired target and specify the target in the drop-down
menu.
6. Click the Browse button to specify the chosen target path.
7. If you want to back up to different targets, click the Add target button and repeat the two
previous steps.
8. Click the
button.
 The Step 3 of 3 – Please select your backup options screen is displayed (see Backup
Settings Screen→ 26).
9. Enter a name for the backup in the Backup name input field.
10. If you want to schedule this backup or run it on a regular basis:
1. Select the backup schedule type in the Time schedule drop-down menu.
2. Click the Edit button if you want to specify the schedule.
 The Define your time schedule window is opened.
3. Select the start date and other time settings that are appropriate to your backup schedule.
4. Select the backup type used for the following backups in the Select backup type dropdown menu (see Backup Types→ 28).
11. Configure other settings as desired in the Options area.
12. If necessary, specify additional settings in the Expert Options area (see Expert Options
Overview→ 42).
13. Click the
button.
 The Nero Kwik Media Library backup is carried out and the final screen is displayed.
You can follow the process status in the task bar.
Media Library
The media library is a database which contains all your media files that were indexed by Nero Kwik Media. It is designed to be accessed in several Nero applications via Nero MediaBrowser
Nero MediaBrowser and the media library come with Nero Kwik Media and are
installed together. You will find further information in the Nero Kwik Media manual.
Nero BackItUp
23
Backing Up Drives
8
Backing Up Drives
With Nero BackItUp you can carry out drive backups. When restoring a drive backup, programs and operating systems are restored, in contrast to file backup restoring.
The drive backup can be updated. The update type Incremental backup is available for this
purpose.
The first step is selecting a drive to back up.
The next step is to select a target where to save the backup. You can save the backup on
your hard drive or removable data media, burn the backup to a disc or use an online storage.
When you back up a drive, the backup file is usually quite large. If you burn the backup to
disc, you will usually require multiple discs. The first backup disc is always a bootable disc. If
you do not burn the backup to disc, it is still quite useful to create a bootable disc so that you
can start the computer (and the drive restore) from CD/DVD in the event of an emergency.
At last you can make settings according to your preferences.
Administrator rights
You must have administrator rights in order to back up and restore hard drives
and partitions.
To backup drives, proceed as follows:
1. Click the
Additional Tasks button.
 The Additional Tasks area is displayed.
2. Click the Drive Backup entry link in the Create a backup area.
 The Step 1 of 3 – Please select your source drive screen is displayed.
Please select your source drive
Nero BackItUp
24
Backing Up Drives
3. Select a partition in the left to show the information in the right. Select the check box in front
of the partition that you want to add to the backup.
 The selected partitions are added to the backup.
4. Click the
button.
 The Step 2 of 3 – Please select your target screen is displayed.
5. Click the icon that represents your desired target and specify the target in the drop-down
menu.
6. Click the Browse button to specify the chosen target path.
7. If you want to back up to different targets, click the Add target button and repeat the two
previous steps.
8. Click the
button.
 The Step 3 of 3 – Please select your backup options screen is displayed (see Backup
Settings Screen→ 26).
9. Select the backup type used for the following backups in the Select backup type dropdown menu (see Backup Types→ 28). Running incremental follow-up backups will only
save the changes that were made after the last run.
10. Enter a backup name in the Backup name field.
11. If you want to schedule this backup or run it on a regular basis:
1. Select the backup schedule type in the Time schedule drop-down menu.
2. Click the Edit button.
 The Define your time schedule window is opened.
3. Select the start date and other time settings adequate to your backup schedule.
12. Configure other settings as desired in the Options area.
13. If necessary specify additional settings in the Expert Options area (see Expert Options
Overview→ 42).
14. Click the
button.
 The drive backup is carried out and the final screen is displayed. You can follow the
process status in the status bar.
Nero BackItUp
25
Backup Settings Screen
9
Backup Settings Screen
After selecting the source to be backed up and specifying the target for the backup, you configure the backup settings in the Step 3 of 3 - Please select your backup options screen
and start the backup process.
File Backup - Please configure your backup
The following setting options are available in the Backup type and name area:
Select backup
type
Backup Name
Specifies the type of backup. For file backups, four types are available:
Full backup, Backup update, Incremental backup and Differential
backup. For drive backups, Full backup and Incremental backup are
available.
Backup update, Incremental backup and Differential backup have
to be combined with a backup schedule, because they are update
types. Full backup may be combined with a backup schedule.
Specifies the name of the backup.
The following setting options are available in the Time schedule area:
Time Schedule
Specifies when and with what frequency backups are made. The following entries are available:
Nero BackItUp
26
Backup Settings Screen
Once: Makes exactly one backup.
Daily: Makes daily backups.
Weekly: Makes weekly backups on one or more defined days (e.g.
every Tuesday and Thursday).
Monthly: Makes monthly backups.
When Idle: Starts the backup when the computer is inactive, i.e. no
applications are active and there is no user input.
At System Startup: Starts the backup when the operating system is
started.
At Log on: Starts the backup when you log into the system.
Not Scheduled: Makes immediately one backup, you cannot schedule
it.
On Directory change: Starts the backup when the source of the backup was changed.
Edit
Opens the Define time schedule window. Here you can specify e.g.
the start date and time for the (first) backup.
The button is available for the schedule types Once, Daily, Weekly,
Monthly, and when Idle.
The following setting options are available in the Options area:
Compresses the data before backup. Select the compression level
here.
None: No compression at all, a 1:1 copy is made. The compression
Select Compres- process is therefore very fast.
sion
Normal: Normal compression, the compression process is fast and the
compressed data has a moderate size.
High: Higher compression, the compression process is slower but the
compressed data size is low.
Select Encryption
Activates the encryption function so that you can encrypt the backup
with a password by using the input fields below. Choose between the
traditional encryption procedure or the AES encryption procedure.
Password / Verify Specifies the encryption password. (This password is required when
Password
the backup is restored at a later point in time!)
Password Hint
Allows you to define a hint that will help you if you forgot the password.
Enable verify
after backup
Verifies that the data is complete and correct after backup.
Shutdown PC
after backup
Automatically shuts down the PC after the backup process has ended.
Nero BackItUp
27
Backup Settings Screen
The option to shut down the computer after a job has been finished can be selected at any time in the context menu of Nero BackItUp Agent. The Nero
BackItUp Agent is available in your computer's notification area.
See also
 Backup and Restore Expert Options Overview →42
9.1
About Backup Types
There are four backup types in Nero BackItUp:

Full Backup

Differential Backup

Incremental Backup

Update Backup
For file backups, all four backup types are available. For drive backups, only Full Backup
and Incremental Backup are available.
With the Full backup type, all files and folders that you have selected will be backed up. A
first backup is always a full backup.
With the Incremental backup type, all files that have changed in comparison to the last
backup will be saved.
With the Differential backup type, all files that have changed in comparison to the first
backup will be saved.
With the Update backup type, the actual backup procedure depends on the media on which
the backup is made:

If you are backing up to a hard drive with the Update backup type, then the data of the
previous backup will be overwritten with the changed data. This means that older versions will be erased; access to older backup states will no longer be possible.

If you are backing up to the disc on which the previous backup was burned with the Update backup type, then the procedure is the same as described for the Incremental
backup. In this case a folder will be generated in a new session.
With the three Full, Incremental and Differential backup types, it does not matter which
medium you save the backup to. You can, for example, use the disc that you used for any of
the older backups (Nero BackItUp automatically started a multisession disc) as long as there
is still space on the disc. You can also back up to a new medium.
Nero BackItUp
28
Backup Settings Screen
Incremental Backup (Above) and Differential Backup (Below)
The picture above shows the difference between incremental and differential backups (which
are represented as curved lines):

With the incremental backup type, the changes that were made compared to the last
backup are saved: The second backup run (2.) is compared to the first (1.), and the third
backup run (3.) is compared to the second (2.).

With the differential backup type, the changes that were made compared to the first
backup are saved: The second backup run (2.) is compared to the first (1.) and the third
backup run (3.) is compared to the first (1.) as well.
A
n example is provided below to illustrate the difference between incremental and differential
backups with file backup:
Let's assume that you have 100 photos and are backing them up. The first (full) backup contains the 100 photos. Then you change 25 of the photos and want to back up again. You
select an incremental or differential backup (it does not matter which you select for the
second backup). The 25 changed photos are backed up. Then you change another 10 photos and want to back up again:
If you select the Incremental backup, 10 photos are backed up, specifically those that have
changed since the last backup. (Nero BackItUp compares the current status with the last
backup.)
If you select the Differential backup, 35 photos are backed up, specifically those that have
changed since the first backup. (Nero BackItUp compares the current status with the first
backup.)
This means that incremental backups require less storage space, however usually more
backup versions will have been created. The result is that the restore takes longer since
many small versions must be restored (and made ready) one after the other.
The opposite is true of the differential backup: It requires more storage space, however only
two backup versions (the first and the last) are needed. Consequently, for the restore only
two versions are restored (and made ready) because the last version contains all changes
made since the first backup.
Nero BackItUp
29
Backup Settings Screen
Data backup distinction between differential and incremental backup
1
1st backup
4
Data on the computer
White: Original data
Black: Changed data
2
2nd backup
5
Incremental backup
Data that has been modified since the first
backup is backed up
3
3rd backup
6
Differential backup
Data that has been modified since the previous
backup is backed up
Nero BackItUp
30
Backup Settings Screen
The following table provides information to help you determine the correct update type for
your file backup:
Backup type
Storage space requirement for the backup set
Effort involved in restoring
Full backup
Extremely high
Extremely low (only the
Yes
current version is required)
Differential backup
Mid
Low (current and first
version must be kept)
Yes
Incremental backup
Low
High (all versions must be
kept)
Yes
Extremely low
Extremely low (only the
No
current version is required)
Backup update to hard
drive
(old versions will be
erased)
9.2
Can older versions be
accessed?
About the Time Schedule
If you have definied a time schedule, the backup process will be carried out automatically at
the defined time. The system time is used for this purpose.
The computer must be switched on and an operating system must be running for this to
happen. Nero BackItUp does not have to be running in order to carry out the scheduled
backup, since it can work in the background.
Depending on which setting you have selected, the backup can either be executed without
the user being logged on or a user must be logged on.
In order for the backup to be carried out as scheduled, provide the chosen target media:

If the backup is to be burned to disc, ensure that an appropriate blank disc is inserted in
the burner.

If you are backing up to an FTP server, ensure that the computer is connected to the
Internet.

If you are backing up to a removable medium or to an external hard drive, ensure that
the appropriate device is connected or installed.
After the backup has been successfully completed, a corresponding message appears in the
system tray. If you set notifications in the Expert Options area, you will be sent an e-mail (if
a network or Internet connection exists).
Nero BackItUp
31
Syncing With Nero BackItUp
10
Syncing With Nero BackItUp
With Nero BackItUp you can synchronize (“sync”) files between two folders. You can use the
sync function within the application or you can use the standalone sync tool that comes with
Nero BackItUp.
Synchronizing exchanges files between two folders. The folders can be located on the same
computer or on different computers and devices. For example, you can synchronize your
desktop computer with your laptop to make sure that relevant directories contain the same
contents.
See also
 Creating Standalone Nero BackItUp SyncTool → 50
 Syncing Folders →32
10.1 Syncing Folders
With Nero BackItUp you can sync two folders. The first step is to select two folders (a left
folder and a right folder) for syncing. The next and final step is to define your preferred settings.
To sync, proceed as follows:
1. Click the
Additional Tasks button.
 The Additional Tasks area is displayed.
2. Click the Create a sync job entry link in the Sync area.
 The Step 1 of 2 - Please select the left and right folder screen is displayed.
Step 1 of 2 - Please select the left and right folder
Nero BackItUp
32
Syncing With Nero BackItUp
3. Click the Left folder Browse button to choose the left folder.
4. Click the Right folder Browse button to choose the right folder.
5. Click the
button.
 The Step 2 of 2 – Please select your synchronization options screen is displayed.
New Data Synchronization - Finalize Settings
6. Select a sync type in the Select a type drop-down menu (see About Sync Types→ 34).
7. Enter a name for the sync job in the Type a name input field.
8. If you want to schedule the sync job or to run it on a regular basis:
1. Select the sync schedule type in the Time schedule drop-down menu.
2. Click the Edit button if you want to specify the schedule.
 The Define your time schedule window is opened.
3. Select the start date and other time settings that are appropriate to your backup schedule.
9. Choose your preferred conflict-handling option in the Conflict handling area.
10. Click the
button.
 The sync job is started and the final screen is displayed.
Nero BackItUp
33
Syncing With Nero BackItUp
10.2 About Sync Types
Nero BackItUp has five sync types:

Mirror

Copy

Update

Partial mirror

Partial synchronization
The following pictures show examplary sync cycles for each of the sync types illustrating the
differences between the sync types. As a precondition, you have executed a first syncing
run. This way, each of the two folders contains four identical files. This is shown in the first
step.
In the next step you change the files in the left or the right folder, as illustrated by the hand
symbol. (Depending on the sync type, you make changes only in the folder where changes
make sense). In the third step Nero BackItUp is executing the syncing process, as illustrated
by the Nero BackItUp syncing icon. Finally, the result of the syncing process is shown.
These symbols apply for the changes:
= updated file,
Mirror
= deleted file,
= new file
Partial Mirror
The Mirror type synchronizes two folders. New and updated files are copied from one folder
to the other folder. Files that are deleted in one folder are also deleted in the other folder.
The Partial mirror type has the same function as the Mirror type with the exception that the
Partial mirror type does not delete.
Nero BackItUp
34
Syncing With Nero BackItUp
Copy
Update
The Copy type copies new and updated files from the left to the right folder. Files that are
deleted in the left folder are also deleted in the right folder.
The Update type has the same function as the Copy type with the exception that the Update type does not delete.
Nero BackItUp
35
Syncing With Nero BackItUp
Partial synchronization
The Partial synchronization type copies updated files from the right to the left folder. This
sync type only deals with the same files, new files or deleted files will be ignored.
Note that Nero BackItUp cannot identify changed or renamed files during the first run. The
reason is that sync information is stored in a separate file and changes are compared to this
information.
You can also specify how Nero BackItUp should handle a conflict. For example: you are
running a sync job using the Partial Mirror type so that updated files are copied from left to
right. When a file in the right folder is newer than its counterpart on the left, a conflict occurs.
Depending on your choice, Nero BackItUp will keep the specified file (either the left, the right
or the newest file), does not replace the file on the right, or asks you what to do.
Nero BackItUp
36
Restore With Nero BackItUp
11
Restore With Nero BackItUp
11.1 Restore Files and Folders
With Nero BackItUp you can restore file backups. The content of the file backup is restored
during this process. You can exclude individual files from the restore process or select specific files to be restored. It is even possible to choose a drive backup to restore individual
files. In contrast to a drive backup restore process, a file backup does not allow the restore of
programs or operating systems
The first step is to select the backup and the backup run. The next step is then to select files
and folders for restore.
The next step is to select a path where to restore the backup and to make settings according
to your preferences.
Restoring files and folders is possible from the following backups:
▲ Nero LIVEBackup
▲ File Backup.
▲ Nero Kwik Media library backup
▲ Drive Backup
To restore a file backup, proceed as follows:
1. Click the
Additional Tasks button.
 The Additional Tasks area is displayed.
2. Click the Restore backups entry link in the Manage and Restore area.
 The Step 1 of 2 – Please select your backup to be restored screen is displayed. The
executed backups are displayed in the general job navigation slider.
Please select your backup to be restored
Nero BackItUp
37
Restore With Nero BackItUp
3. Make the backup available:
1. If the backup is located on a disc, insert the disc in a drive.
2. If the backup has been saved to hard drive, network drive, or removable medium, ensure
that your computer has access to the respective drive.
4. Select the desired backup job in the job navigation slider with the help of the arrow buttons.
5. If your selected backup is a drive backup, select the Restore files option button.
6. If your selected backup job has several runs, select the version in the upper run navigation
slider.
 The files and folders of the backup are displayed.
Select files and folders
7. If the backup you want to restore is not displayed, click Browse > From local to search for
it on hard disk or Browse > From FTP to search for it on a FTP server.
8. If the backup was saved to the online storage Nero Online Backup with Autobackup, click
Browse > From Online and enter your Subscription ID and your Password.
9. If the backup is encrypted, enter the passwort in the input field provided.
10. Select a folder in the left to show the contained files in the right. Select the check box in
front of the folder or the file that you want to restore.
Nero BackItUp
38
Restore With Nero BackItUp
Use the search field to search through the backup for specific files (for file name
or meta data) so that they can be added to the restore.
11. Click the
button.
 The Step 2 of 2 - Please select your restore options screen is displayed.
Restore options
12. If you want to restore the backup to the original path, select the Restore to original path
option button.
13. If you want to migrate user-specific folders, enable the Migrate user-specific folders to
current user check box.
Migrate user specific folders to current user refers to user-specific folders
such as My Documents which will be restored to the path of the user who is currently logged in. If you clear this check box then Nero BackItUp will restore the
user-specific folders to the user path under which the backup was saved.
14. If you want to specify the path on which the backup will be restored yourself:
1. Select the Restore to custom path option button.
2. Click the Browse button.
Nero BackItUp
39
Restore With Nero BackItUp
 The Browse For Folder window is opened.
3. Select the desired restore path and click the OK button.
 The Browse For Folder window is closed and the selected path is transferred.
4. If you want to keep the original directory structure, enable the Preserve original directory structure check box.
15. Use the How to resolve conflicts option buttons to choose the action to take when a file to
be restored is already (or is still) on the computer.
16. If necessary specify additional settings in the Expert Options area (see Expert Options
Overview→ 42).
17. Click the
button.
 The restore is carried out and the final screen is displayed. You can follow the
process status in the task bar.
See also
 Backup and Restore Expert Options Overview →42
11.2 Restore Drive Backup
With Nero BackItUp you can restore drive backups. During this process, the drive backup
content is restored. Programs and operating systems are restored. Problems usually occur if
you want to restore an active hard drive or partition, e.g. locking an active hard drive or partition for the restore process is usually not possible. In this case, we recommend carrying out
the restore process with Nero BackItUp ImageTool, which you create with Nero BackItUp.
Restoring drives and programs is possible from the following backups:
▲ Nero LIVEBackup
▲ Drive Backup
Administrator rights
You must have administrator rights in order to back up and restore hard drives
and partitions.
For technical reasons, only one single partition or one hard drive with all partitions
can be restored during one restore process.
To restore a drive backup, proceed as follows:
1. Click the
Additional Tasks button.
 The Additional Tasks area is displayed.
2. Click the Restore backups entry link in the Manage and Restore area.
 The Step 1 of 2 – Please select your backup to be restored screen is displayed. The
executed backups are displayed in the general job navigation slider.
3. Make the backup available:
1. If the backup is located on a disc, insert the disc in a drive.
Nero BackItUp
40
Restore With Nero BackItUp
2. If the backup has been saved to hard drive, network drive, or removable medium, ensure
that your computer has access to the respective drive.
4. Select the desired backup job in the job navigation slider with the help of the arrow buttons.
5. If your selected backup job has several runs, select the version in the upper run navigation
slider.
 The partitions of the backup are displayed in the left area. Partitions that were not part of
the drive backup are grayed out.
6. If the backup you want to restore is not displayed, click Browse > From local to search for
it on hard drive or Browse > From FTP to search for it on a FTP server.
7. Select the option button preceding the partition that you want to restore. Information about
the backed up partition, like Backup date, Partition size and Data size, is displayed in the
right area.
8. Click the
button.
 The Step 2 of 2 – Please select the target for the restore screen is displayed. The
partition to be restored and a target for restore are shown. The default restore target will
be the original location.
9. If you want to restore the backup to another location:
1. Click the arrow icon.
2. Specify the target in the drop-down menu.
You can choose any partition as target as long as the partition size is greater than
or equal to the used space (data size) of the source partition to be restored.
The target partition will be overwritten during the restore process. All existing data
of the target partition will be lost!
10. If necessary specify additional settings in the Expert Options area (see Expert options→
42).
11. Click the
button.
 The restore is carried out and the final screen is displayed. You can follow the
process status in the task bar.
Nero BackItUp
41
Backup and Restore Expert Options Overview
12
Backup and Restore Expert Options Overview
You can define expert option settings for the backup or the restore in the Expert options
area. You can display this area by clicking Expert options in the configuration or settings
screens. We recommend that you only change the default settings if you have extensive
knowledge in the area of backup.
The following options are available:
File Filters
Offers options for using filters for the backup.
Only available for file backup.
CPU Control
Selects the priority of the backup in the computer system. Due to this
you can have your system always accessible or give the backup the
highest priority.
Scripting
Enables scripting. You can select autowrite action scripts and specify
whether they are executed before or after a certain procedure. You
can also select an application for execution.
E-mail Notification
Logging and Debug
Offers options to set up automatic e-mail notifications for certain
events (see E-mail Notification→ 43).
Selects the detail level of the log file. You can include the log file in
the backup or store it elsewhere.
Nero BackItUp
42
Backup and Restore Expert Options Overview
Miscellaneous
Burning
Offers several specific options (see Miscellaneous→ 44).
Offers several burn options such as choosing the write speed and
automatically erasing rewritable discs.
Only available for backups.
Purge
Offers options to delete backups automatically.
Only available for backups.
12.1 E-mail Notification
With Nero BackItUp you can set up automatic e-mail notifications for certain events.
Expert options - E-mail Notifications
The following setting options are available:
Check box
Enable backup/restore Enables sending of e-mail notifications.
status notifications
Nero BackItUp
43
Backup and Restore Expert Options Overview
Drop-down menu
Send notifications
from this e-mail account
Button
Create New
List
E-mail Notifications
Chooses the account used for sending the e-mail notifications.
Opens the E-mail accounts window, where you can create a
new e-mail account.
Opens the E-mail events window, where you can enter the email address to which the notification will be sent. Click All information to select all events as a trigger for e-mail notifications.
12.2 Miscellaneous
Here you can specify general options.
The following setting options are available for backup:
Check box
Do not back up user
access rights
If this check box is cleared then Nero BackItUp will also back up
the access rights of files and folders if such rights have been configured.
Note that if you clear this check box then the backup can only be
restored precisely to the same account on the same computer
from which the backup was made!
This function can only be performed if the data medium uses the
NTFS file system. Only available for file backup.
Check box
Only run this job in
case the user is
logged in
Starts the backup only if the user who set up the job is logged
onto the system.
If this check box is disabled, the backup is not made if the user is
not logged on. In this case, Nero BackItUp asks for your user
information when setting up the job.
This function can only be executed if you had scheduled the
backup.
Check box
Always run this job
silent
Check box
Use shadow copy
Performs the backup without displaying status messages.
Creates a shadow copy for the file backup, i.e. open files that are
being worked on can be saved.
Only available for file backup.
Nero BackItUp
44
Backup and Restore Expert Options Overview
Check box
Execute backup on
button press
Allocates the backup job to the "Push for Backup" service. This
service can be started only from an appropriately equipped external hard drive and the corresponding software with the help of the
hard drive's "Push for Backup" button, and carries out a previously defined backup automatically with Nero BackItUp.
Only available if such a hard drive is connected. Information
about this feature is normally available in the Help of the respective hard drive or application.
Selects the verification type Nero BackItUp uses and by so doing
increases the certainty that the same file will be replaced.
Modified Date/Time: Compares files by their change date.
List
Compare files by
NTFS change journal: Compares files using the NTFS change
journal
CRC: Calculates the CRC checksum during the drive backup
process. This provides additional security but requires more time.
Only available for file backup.
Ignores a time difference in the file properties when verifying files
after the backup. (Such a time difference can occur, for example,
Ignore time difference if the file is very large and the backup took some time.)
when comparing files
Only available for file backup.
Check box
When you clear the Do not back up user access rights check box then the
backup can only be restored to the account on the computer from which the
backup was performed. In this case it is not possible to restore the backup on
another account or computer. We recommend that you only use this function if
you have extensive knowledge in access rights management.
The following setting options are available for restore:
Check box
Restore access
rights of files and
folders
If this check box is selected then Nero BackItUp will restore the
access rights of files and folders if such rights have been saved.
Note that if you select this check box then the backup can only be
restored to precisely the same account on the same computer from
which the backup was made!
This function can only be executed if the data medium uses the
NTFS file system. Only available for file backup.
Check box
Always run this job Performs the backup without displaying status messages.
silent
Nero BackItUp
45
Manage Your Backup and Sync Job Screen
13
Manage Your Backup and Sync Job Screen
The Manage your backup and sync job screen shows all planned and executed jobs (File
Backups, Drive Backups, Sync jobs). The screen is displayed by clicking the Manage backup or sync jobs link in the Additional Tasks area.
The jobs are displayed in chronological order, first all planned jobs, then all already executed
jobs. The newest job is on top of the list. Each job displays information about job name, last
run, size, status and backup type. Each job is displayed in its own area with information
about the last and next run on the right and the most relevant settings options as links. Some
more setting options, which are more seldom used, are hidden per default. Click within the
job area to display the hidden settings options.
Manage your backup and sync jobs
The following icons are available:
Refers to a file backup job.
Refers to a drive backup job including Nero LIVEBackup.
Refers to a sync job.
Nero BackItUp
46
Manage Your Backup and Sync Job Screen
The following setting options are available for a job:
Run now
Executes the job immediately.
Restore
Displays the restore view. The latest backup of the selected job is
preselected.
Only available for a backup job.
Edit
Copy
Displays the job’s configuration allowing you to change them.
Saves a copy of the selected job under a new name allowing you to
change the settings.
The following setting options are available in the hidden area:
Show Backups
Displays the list of backups which belong to that job. The button then
changes to the Hide Backups button.
Only available for a backup job.
Backup list
Shows the backup runs belonging to the selected job in a chronological order. Information like backup name, execution date, data size,
status and backup type are given.
If a backup has failed to be executed, you are able to view, save and
print the log file from here.
Only available for a backup job.
Deletes the selected backup run.That means, that the references in
Nero BackItUp to the backup run are removed. Note, that the backup
file itself will not be deleted!
Button
Delete Selected
Note that deleting single backup runs here may cause problems
when restoring in case the information is needed to complete the
whole restore! In general, it may be safe to delete the latest incremental backup (as incremental backup runs are compared to the last
run). It may also be safe to delete any middle differential backup (as
differential backup runs are compared to the first full backup).
Only available for a backup job.
Button
Activate / Deactivate
Button
Delete Job
Activates/Deactivates the job.
The option to deactivate the job rather than to delete them has the
benefit that all information is kept and that you are able to activate
the job at any time again.
Deletes the backup/sync job permanently. That means, that the references in Nero BackItUp to the job are removed.
Note that the backup file or synced data itself will not deleted! Restoring a backup will still be possible, you have to browse for the
backup in that case in the Restore view.
Nero BackItUp
47
Manage Your Backup and Sync Job Screen
About deleting backups in general
If you want to delete backups, keep in mind, that the backup file itself is physically
stored either on hard drive, on an removable medium, an online storage or a disc
– wherever you have stored it. If you want to remove a backup file physically, you
have to delete it from your hard drive, destroy the disc – or whatever action
seems reasonable to erase the file.
In Nero BackItUp, on the other hand, relevant information about the backup is
stored. This information may be used for restoring or for scheduling backup runs.
A missing backup file may lead to an unsuccessful restore.
Deleting a backup file will not remove the information in Nero BackItUp. Removing the information in Nero BackItUp will not actually delete the backup file physically. This may be on purpose. As long as the backup file physically exists restoring is still possible.
But if you are going the delete backup files, for example because of space issues,
we recommend to first remove the information in Nero BackItUp and then to delete the backup file physically.
Nero BackItUp
48
Tools
14
Tools
14.1 Creating Bootable Nero BackItUp ImageTool
With Nero BackItUp, you can create a bootable CD or DVD including Nero BackItUp ImageTool. The FTP servers that you entered in the Nero BackItUp options are applied.
To create a bootable CD/DVD, proceed as follows:
1. Insert a writable CD/DVD in the burner.
2. Click the disc icon > Create ImageTool Disc menu.
 The Create Nero BackItUp ImageTool, Nero’s disaster recovery solution, to CD or
DVD screen is opened.
Create bootable disc
3. Select the appropriate burner in the Optical Disc drop-down menu.
4. Select the type of the inserted disc (CD or DVD) in the Disc type drop-down menu.
5. Click the
button.
 The creation process begins; you can track the process via the messages in the task
bar. After the creation process is completed, the disc is ejected. You have created a
bootable disc that can be used to start Nero BackItUp ImageTool.
See also
 Nero BackItUp ImageTool →60
Nero BackItUp
49
Tools
14.2 Creating Standalone Nero BackItUp SyncTool
Nero BackItUp can be used to create Nero BackItUp SyncTool. This tool is used for sync
functions, and can be run from hard drive, removable medium (USB) or an optical disc.
To create Nero BackItUp SyncTool, proceed as follows:
1. Click the Tools > Create SyncTool Media menu.
 The Create Nero BackItUp SyncTool to your preferred media screen is opened.
Create standalone sync client
2. If you want to create the Nero BackItUp SyncTool to hard drive, select the appropriate hard
drive from the Hard Disks drop-down menu.
3. If you want to create the Nero BackItUp SyncTool to an optical disc:
1. Insert a writable CD/DVD in the burner.
2. Select the appropriate burner in the Optical Disc drop-down menu.
3. Select the type of the inserted disc (CD or DVD) in the Disc Type drop-down menu.
4. If you want to create the Nero BackItUp SyncTool to removable medium:
1. Connect the removable medium to your computer.
2. Select the removable medium from the Removable Media drop-down menu.
Nero BackItUp
50
Tools
5. Click the
button.
 The creation process begins; you can track the process via the messages in the task
bar. After the creation process is completed, the disc is ejected. You have created
the standalone Nero BackItUp SyncTool and can now start it.
See also
 Nero BackItUp SyncTool →69
14.3 Erase Rewritable Disc Window
Nero BackItUp can be used to erase rewritable discs, i.e. discs with the RW specification, as
long as your recorder supports this feature. Two erase methods are available for this purpose:
Quick erasing does not remove the data physically from the disc, but instead only makes it
inaccessible by erasing the references to existing content. The data can be restored!
Full erasing removes the data from the disc by overwriting it with zeros. The contents cannot
be restored with conventional methods. Repeated full erasing increases the probability that
third parties will not be able to reconstruct the contents.
Erase Rewritable Disc window
Nero BackItUp
51
Tools
The following configuration options are available in the Erase Rewritable Disc window:
Selection list
Select recorder
Defines the desired recorder.
Defines the erase method. Two options are available:
Selection list
Select the erase method to be used
Button
Erase
Button
Cancel
The Quick-erase rewritable disc method does not physically
erase all data from the disc, but only the references to the contents. The disc will appear to be empty even though the data is
still physically available. Erasing a disc using this method takes
between one and two minutes.
The Full-erase rewritable disc method physically erases all
data from the disc. The contents cannot be restored with conventional methods. Repeated full erasing increases the probability that third parties will not be able to reconstruct the contents.
Erasing the disc using this method takes longer than the other
method, depending on the type of disc involved.
Starts the erase process.
Cancels the action and closes the window.
Nero BackItUp
52
Nero BackItUp Options Overview
15
Nero BackItUp Options Overview
You can define options for working with Nero BackItUp in the Options window. You can
open the window via the
button.
The following options are available:
General
Backs up files and folders starting from the shell context menu. The
shell context menu offers various pertinent information and is opened
by clicking a file or folder with the right mouse button in the Windows
Explorer.
Help
Enables tooltips. You can also re-enable all windows that you had
disabled with the "Never show me this message again" check box.
Remote
Sets up remote targets. You can add, change, or remove FTP server. In addition you can enable and configure proxy settings.
E-mail accounts
File Filters
Sets up e-mail account information.
Defines file filters which can be used for backups and restores. Depending on the definition, the filter includes or excludes certain type
of files. The filters can also be combined.
See also
 Setting Up FTP Server Connection →53
 Remote Proxy →55
 Setting Up E-Mail Account →56
 Creating Filter →57
15.1 Setting Up FTP Server Connection
With Nero BackItUp you can enter the connection information for your FTP server so that
you can choose it as a backup target. The FTP server itself is not provided by Nero BackItUp. You usually gain access to it through an FTP server provider such as a webspace provider.
To set up a new FTP server connection, proceed as follows:
1. Click the
button.
 The Options window is opened.
2. Click the Remote entry in the selection list.
 The Remote screen is displayed with the FTP tab on top.
3. Click the New button.
 The Remote Host Settings window is opened.
Nero BackItUp
53
Nero BackItUp Options Overview
Remote Host Settings
4. Enter a name for the connection in the Host/Server name input field.
5. Enter the required values Host/Server address, Login name, Password, Server type,
Port and Transfer mode.
The values for Host/Server address, Login name, Password, Server type,
Port and Transfer mode are provided by the FTP server provider, e.g. your webspace provider or your network administrator.
6. Click the Browse button to select a folder on the FTP server and to test the FTP server
connection.
 The Remote Host Settings window is opened. Nero BackItUp connects to the FTP
server.
Note that it is not possible to save the FTP server connection without a positive
connect result.
7. Select a folder or create a new folder on the FTP server where Nero BackItUp should store
the backup.
8. Click the OK button.
Nero BackItUp
54
Nero BackItUp Options Overview
9. Click the Save button.
 The FTP server is saved and displayed in the list of FTP servers. You can now store
other FTP server information or close the window and use the FTP server for backups and restores.
The created FTP servers are saved when creating a bootable CD/DVD and applied to the respective Nero BackItUp ImageTool options. (To enable them in
Nero BackItUp ImageTool, the network must be configured in the Nero BackItUp
ImageTool options.)
15.2 Remote Proxy
You can enable and configure proxy server on the Remote > Proxy tab in the Options window. You only need to configure the proxy if you need to use it for accessing the Internet or
any other network. In this case, the proxy settings are relevant for all network task you can
do with Nero BackItUp such as using online storage, FTP server, network connections, and
e-mail notifications.
The following setting options are available:
Check box
Activates the proxy server connection information which are now
Enable proxy servused by Nero BackItUp.
er
Option button
Use system settings
Option button
Use local settings
Uses the proxy settings.
This is only possible if you have configured and stored proxy settings
on your system.
Uses the local proxy settings and allows you to enter them in the
input fields below.
The correct settings for the proxy connection need to be provided by your system
administrator or internet provider.
The created proxy connection is saved when creating a bootable CD/DVD and
applied to the respective Nero BackItUp ImageTool options.
Nero BackItUp
55
Nero BackItUp Options Overview
15.3 Setting Up E-Mail Account
In Nero BackItUp you can add your e-mail account information. Thus can be used to send
status information about backup and restore processes via e-mail. The receiver is later on
added in the same screen where you set up options regarding your backup or restore (see
Backup And Restore Expert Options→ 42).
To set up an e-mail account, proceed as follows:
1. Click the
button.
 The Options window is opened.
2. Click the E-Mail accounts entry in the selection list.
 The E-Mail accounts screen is displayed.
3. Enable the Enable e-mail accounts check box.
4. Click the New button.
 The E-mail accounts window is opened.
E-mail accounts
5. Enter a name in the Your name input field.
6. Enter a description in the Description input field.
7. Enter the required values Server name, Port, Authentication type, User name,
Password and secure connection.
Nero BackItUp
56
Nero BackItUp Options Overview
Note, that the Server name input field requires an SMTP server, because Nero
BackItUp uses the account information only to send e-mails (not to receive). You
need to enter your complete e-mail address ([email protected]) in
the User name input field.
The values for Server name, Port, Authentication type and the secure connection are provided by your e-mail provider or your network administrator.
8. Enter your e-mail address in the E-Mail from input field.
9. Click the Test button to test the connection.
 A message window is displayed.
Note that it is not possible to save the e-mail account without a connection to the
Internet.
10. Click the Save button.
 The e-mail account is saved and displayed in the list. You can now store other email account information or close the window and use the e-mail account for e-mail
notifications during backups and restores.
15.4 Creating Filter
You can create filters to filter certain files for backup or restore. You can either create filters
for a particular backup or restore, or you can create them for all backups and restores.
One filter does always have one specific filter criteria! First, you select one filter criteria in the
respective area, followed by adding the specifics to the filter, and then the filter is saved.
To create a filter that will subsequently be available for every backup and every restore, proceed as follows:
1. Click the
button.
 The Options window is opened.
2. Click the File Filters button.
If you want to create filters for a special backup/restore, click the Create New
button in the Expert options area in the File Backup/Restore configure screen.
3. Click the New button.
 The Create a New Filter window is opened.
Nero BackItUp
57
Nero BackItUp Options Overview
Create a new filter
4. If you want to filter by File Extension:
1. Select the Exclude file types from my backup option entry to exclude files with a certain file extension.
2. Select the Include only files types in my backup option entry to include files with a
certain file extension.
3. Click the blue underlined file types link.
 The Add File Types To Filter window is opened.
4. Select an entry on the left and click the >> button to add file extensions.
5. Select an entry on the right and click the << button to remove file extensions.
6. Enter user-defined file extensions in the input field if necessary.
7. Click the OK button.
 The window is closed. The selected file extensions are added to the filter.
5. If you want to filter by Date:
1. Select the option entry to include only files which are created, modified or accessed on a
specific date or time frame.
2. Click the blue underlined date or time frame link.
 The Select Date or Time Frame window is opened.
Nero BackItUp
58
Nero BackItUp Options Overview
3. Select a specific date using the calendar or a time frame using the calendar or the input
fields.
4. Click the OK button.
 The window is closed. The selected date or period of time is added to the filter.
6. If you want to filter by Size:
1. Select with the option entries whether the desired files must have a certain minimum or
maximum size.
2. Specify the size in MB in the input field.
7. If you want to exclude a specific path:
1. Select the Exclude path from my backup option entry.
2. Click the blue underlined path link.
 The Exclude Path window is opened.
3. Click the Add button.
 A browser window is opened.
4. Select the folder you want to exclude and click the OK button.
 The window is closed. The path to the selected folder is added to the The following
paths are excluded list. The folder and all of its subfolders are excluded in the filtering process.
5. Add additional paths as desired.
6. If you want to select a path again, click the Remove button.
7. Click the OK button.
 The window is closed. The selected path is added to the filter.
8. If you want to exclude a specific file:
1. Select the Exclude files from my backup option entry.
2. Click the blue underlined files link.
 The Exclude Files window is opened.
3. Click the Add button.
 A browser window is opened.
4. Select the file you want to exclude and click the OK button.
 The window is closed. The selected file is added to the The following files are excluded list.
5. Add additional files as desired.
6. If you want to select a file again, click the Remove button.
7. Click the OK button.
 The window is closed. The selected file is added to the filter.
9. Enter a name for the filter in the Filter name input field.
10. If you have opened the Create a New Filter window via the File Backup or Restore screen
but want the filter to be available in the future for each backup or restore, select the Save
this filter check box.
11. Click the OK button.
 The window is closed and the created filter is applied and saved.
Nero BackItUp
59
Nero BackItUp ImageTool
16
Nero BackItUp ImageTool
Nero BackItUp ImageTool is a backup and restore program that is similar to Nero BackItUp,
and which is run from a bootable CD or DVD without Windows being active.
The bootable CD or DVD is created with Nero BackItUp.
Nero BackItUp ImageTool is intended for backing up and restoring drives. Since Nero
BackItUp ImageTool is booted from a CD or DVD, the computer's hard drives are not active.
This makes it possible to back up or restore a drive without verification errors.
See also
 Creating Bootable Nero BackItUp ImageTool →49
16.1 Starting Nero BackItUp ImageTool
Nero BackItUp ImageTool is started from the bootable CD/DVD that you created with Nero
BackItUp. If booting from the CD/DVD, the computer is started without having to access the
hard drive. Since the hard drive is disabled, backup or restore without verification errors is
possible.
The following prerequisites must be fulfilled for the computer to be able to boot from the
disc:
▲ The start sequence must be set in the BIOS of the computer in such a way that the drive
is addressed first as the boot drive (start sequence CD-ROM, C, A for instance).
▲ In the case of an SCSI CD-ROM drive, this drive must be connected to an SCSI adapter
with a separate BIOS in which settings can be modified accordingly. (This will only work
if there are no IDE hard drives present, as these come before the SCSI adapter in the
boot sequence.)
▲ The bootable CD/DVD that you created with Nero BackItUp is placed in the drive.
To boot the computer from the disc and to start Nero BackItUp ImageTool, proceed as follows:
1. Start the computer.
 The computer starts and boots from the CD/DVD.
Nero BackItUp ImageTool is loaded. You can track the process with the messages on
the screen.
The Nero BackItUp ImageTool start screen is displayed. A language selection list is displayed.
Booting from the CD/DVD
It is important for the CD/DVD to already be in the drive when the computer is
started, since this is the only way that the CD/DVD will be booted and Nero
BackItUp ImageTool run.
Because it is not possible to insert a CD/DVD when the computer is switched off,
first start the computer as usual, insert the CD/DVD, and then shut down the
computer.
2. Select the language for Nero BackItUp ImageTool from the Please choose your language
selection list.
Nero BackItUp
60
Nero BackItUp ImageTool
3. Click the OK button.
 The Nero BackItUp ImageTool window is opened.
 A window with a license agreement is opened.
4. Please read the license agreement carefully and select the appropriate check box if you
agree to the terms of the agreement. Using Nero BackItUp ImageTool is not possible without your consent to this agreement.
5. Click the Next button.
 The window with the license agreement is closed. You can now start using Nero BackItUp ImageTool.
 You have booted Nero BackItUp ImageTool from the disc.
The CD/DVD is no longer needed after Nero BackItUp ImageTool has started.
You can remove the CD/DVD if you need the drive for a backup or restore disc.
See also
 Creating Bootable Nero BackItUp ImageTool →49
16.2 User Interface
The user interface in Nero BackItUp ImageTool is the starting point for backups, restores,
and any other task that you can carry out with Nero BackItUp ImageTool. Click here on the
relevant menu icons to go to desired screen where you can start the task.
Click the
button in the left margin of the window to display an extended area with addi-
tional options and features.
Nero BackItUp ImageTool
Nero BackItUp
61
Nero BackItUp ImageTool
The following menu icons are available:
Backup
Performs a drive backup.
Restore
Includes restore tasks. You can restore the full system or restore
single files from a backup archive.
Network
Configures your network, so that a network drive or FTP server can
be used.
Tools
Exit
Offers the option to show mounted partitions. You can also start a
shell command box to type and execute Linux shell commands. We
recommend you only use the Linux shell command if you have experienced knowledge in this area.
Exits Nero BackItUp ImageTool. You can simply shutdown your
computer system or reboot it.
16.2.1 Extended Area
You can access the additional options and features in the extended area of the user interbutton in the left margin of the window. The extended area is available
face by clicking the
in all Nero BackItUp ImageTool screens.
The following setting options are available in the Advanced area:
Options
Opens the Options window, which offers setting options for FTP,
Network and Cache.
Erase Disc
Erases a rewritable disc, i.e. a disc with the RW specification, as
long as your recorder supports this feature.
Disc Info
Rescan Devices
Displays information about the inserted disc (e.g. content if applicable or available capacity).
Searches for new devices.
The following setting options are available in the Recorder area:
From Drive
Defines the desired recorder.
Eject Disc
Ejects the disc.
Nero BackItUp
62
Nero BackItUp ImageTool
16.3 Drive Backup
With Nero BackItUp ImageTool you can back up a hard drive or partition. The advantage in
comparison to drive backups made with Nero BackItUp is that the drive is not active, since
Nero BackItUp ImageTool is booted from the disc. This way, no verification errors occur during the backup process - active hard drives can be backed up.
To back up a drive with Nero BackItUp ImageTool, you must first select the backup source.
You can then write the backup to a disc or save it to a hard drive. It is also possible to save it
to an FTP server.
If you connect a device, you may need to click the Rescan Devices button in the extended
area so that Nero BackItUp ImageTool recognizes the devices.
16.3.1 Burning a Backup to Disc
With Nero BackItUp ImageTool you can make a drive backup and write it to a disc.
The following assumes that the backup is written to several discs.
In order to write a drive backup to a disc, proceed as follows:
1. Click the Backup > Drive Backup button.
 The Step 1 of 3 – Select sources screen is displayed.
2. Select the appropriate check box to select the desired hard drive or partition.
 The hard drive or partition is selected.
You can select several partitions in a hard drive for a backup. However, only one
hard drive can be selected per pass.
3. Click the Next button.
 The Step 2 of 3 - Select target and options screen is displayed.
4. Select a burner in the Target drop-down menu.
5. Make additional settings as desired.
6. Click the Next button.
 The Step 3 of 3 - Finalize screen is displayed.
7. Verify the settings in this screen.
8. Click the Backup button.
 The Backup Process screen is displayed and the backup process starts. You can track
the process with the progress bar.
 The Waiting for Disc window is opened, and the selected drive is ejected.
9. Insert a suitable recordable disc.
 The Waiting for Disc window is closed and the backup process continues. (Nero BackItUp ImageTool starts a multisession disc automatically or continues with it.)
 If the disc's storage capacity is exhausted, the Waiting for Disc window is opened again
and the disc is ejected.
Nero BackItUp
63
Nero BackItUp ImageTool
10. Remove the recorded disc and insert a new blank disc.
 The backup process resumes and the newly inserted blank disc is burned.
11. Repeat the previous step until the backup has been completely burned to disc.
 Once the backup is complete, the disc is ejected and the Backup Process window is
opened.
After the backup has been written completely, Nero BackItUp ImageTool will want to verify the data by default. For this purpose, it will require the discs in the sequence that
they were written.
If the backup was written to one single disc, the verification process is started
automatically.
12. Remove the disc.
13. Click on the Disc drives button in the Backup Process window.
14. Insert the first disc of the backup in order to have it verified.
15. Double-click the drive containing the disc.
 The verification process is started and the first disc verified. The disc is then ejected and
the Backup Process window is opened again.
16. Repeat the two previous steps for each disc of the backup in chronological order.
 When the backup is completed, a window with an appropriate message is opened.
17. Click the OK button.
 You have written the drive backup to a disc. Now you can save the log or click the
Next button to start other actions.
16.3.2 Saving the Backup to a Hard Drive or FTP Server
With Nero BackItUp ImageTool you can save a drive backup to a hard drive or to an FTP
server. Hard drives, network drives, and removable media are generally supported as storage media.
In order to be able to use the FTP server, you must have entered an FTP server
under Options.
To save a drive backup to a hard drive or FTP server, proceed as follows:
1. Click the Backup > Drive Backup button.
 The Step 1 of 3 – Select your sources screen is displayed.
2. Select the appropriate check box to select the desired hard drive or partition.
 The hard drive or partition is selected.
3. Click the Next button.
Nero BackItUp
64
Nero BackItUp ImageTool
 The Step 2 of 3 - Select target and options screen is displayed.
4. Select a hard drive, a network drive, removable media, or the desired FTP server in the
Target drop-down menu.
5. If you selected a hard drive as a target, specify the folder in which the backup should be
saved in the Target path input field.
6. If you selected an FTP server as a target, choose a folder if applicable.
7. Make additional settings as desired.
8. Click the Next button.
 The Step 3 of 3 - Finalize screen is displayed.
9. Verify the settings in this screen.
10. Click the Backup button.
 The Backup Process screen is displayed and the backup process starts. You can track
the process with the progress bar.
 When the backup is completed, an appropriate message is displayed.
 You have executed the drive backup and saved the backup file. Now you can save
the log, or click the Next button to start other actions.
16.4 Restore
16.4.1 Restoring a Drive Backup
With Nero BackItUp ImageTool you can restore a drive backup. The hard drive is not active
during the restore since Nero BackItUp ImageTool is booted from CD/DVD. This provides
greater security in comparison to restoring with Nero BackItUp under Windows. However,
Drive backup restore cannot be used to select individual files in the drive backup - the drive
is restored completely. If you want to select individual files, choose the Extract files from
backup feature.
To restore a hard drive or partition, proceed as follows:
1. Click the Restore > Drive backup restore button.
 The Please select the backup to restore screen is displayed.
2. Make the backup available:
1. If the backup is located on a disc, insert the disc in a drive.
2. If the backup has been saved to hard drive, network drive, or removable medium, ensure
that your computer has access to the respective drive.
3. Select a backup. If the backup you want to restore is not displayed, click the Browse button
to search for it.
 The details of the backup are displayed in the area below.
4. If the backup is password protected, enter the password in the Password input field.
5. Click the Next button.
Nero BackItUp
65
Nero BackItUp ImageTool
 The Please select what you want to restore screen is displayed. The backed up hard
drive with all partitions or the backed up partition of the hard drive is displayed. Partitions
that are not backed up are grayed out.
6. Select the hard drive or partition that you want to restore.
For technical reasons, only one single partition or one hard drive with all partitions
can be restored during one restore process.
7. If the hard drive or partition to be restored contains an operating system and you want the
operating system to be booted when the computer starts, enable the Master Boot Record
check box in order to restore the MBR.
8. Click the Next button.
 The Please select where you want to restore screen is displayed.
9. If you want to restore the backup to the original path, select the Restore to original path
option button.
10. If you want to specify the path on which the backup will be restored yourself, select the
Restore to custom path option button.
11. Click the Next button.
 The Please check the restore setting screen is displayed.
12. Click the Restore Now button.
 The restore is carried out and the final screen is displayed. You can follow the
process status in the task bar.
16.4.2 Extract Files From Backup
With Nero BackItUp ImageTool you can restore single files from a drive backup. Programs
and operating systems are not restored. If you want to restore the programs and operating
systems, choose the Drive backup restore feature.
To restore single files, proceed as follows:
1. Click the Restore > Extract files from backups button.
 The Please select the backup you want to extract files from screen is displayed.
2. Make the backup available:
1. If the backup is located on a disc, insert the disc in a drive.
2. If the backup has been saved to hard drive, network drive, or removable medium, ensure
that your computer has access to the respective drive.
3. Select a backup. If the backup you want to extract files from is not displayed, click the
Browse button to search for it.
 The details of the backup are displayed in the area below.
4. If the backup is password protected, enter the password in the Password input field.
5. Click the Next button.
Nero BackItUp
66
Nero BackItUp ImageTool
 The Please select the files you want to extract from backup screen is displayed. The
files and folders of the backup are displayed.
6. Select the check box preceding the folder or the file that you want to restore. Select a folder
in the left to show the contained files in the right.
7. Click the Next button.
 The Please select the target and restore options screen is displayed.
8. If you want to restore the backup to the original path, select the Restore to original path
option button.
9. If you want to specify the path on which the backup will be restored yourself, select the
Restore to custom path option button.
10. Use the How to solve conflicts option buttons to choose the action to take when a file to
be restored is already (or is still) on the computer.
11. Click the Restore Now button.
 The restore is carried out and the final screen is displayed. You can follow the
process status in the task bar.
16.5 Options Window
The Options window offers setting options for network and FTP. Use the Options entry in
the extended area to open the window. The functionality is similar to the one in Nero
BackItUp.
The following tabs are available:
Configures an FTP server.
Displays FTP servers that were entered in Nero BackItUp at the time when
the bootable CD/DVD was created.
FTP
You can also enable proxy settings here and set the maximum archive
size.
FTP servers can only be displayed or configured if the network has been
configured.
Offers configuration options for the network:
None: No network is configured.
Network
DHCP: Dynamically references the IP address.
Static IP: Uses the static IP address that you enter in the input fields.
The network must be configured for Nero BackItUp ImageTool to connect
with an FTP server.
Cache
Specifies where data is stored in the cache.
Nero BackItUp
67
Nero BackItUp ImageTool
See also
 Setting Up FTP Server Connection →53
 Remote Proxy →55
16.6 Exiting Nero BackItUp ImageTool
To exit Nero BackItUp ImageTool, proceed as follows:
1. Remove the bootable CD/DVD from the drive.
2. If the drive is locked, open the extended area and click the Eject Disc button.
3. Click the Exit button.
4. If you want to reboot your computer system, click the Reboot button.
If you want to shutdown your computer system, click the Shutdown button.
 Nero BackItUp ImageTool is exited and the computer shuts down.
Nero BackItUp
68
Nero BackItUp SyncTool
17
Nero BackItUp SyncTool
Nero BackItUp SyncTool is a program that is used for sync functions. It is run from hard
drive, removable medium (USB) or an optical disc.
Nero BackItUp SyncTool is created with Nero BackItUp. It offers the same features as the
sync feature integrated in Nero BackItUp.
Nero BackItUp SyncTool is particularly useful when you want to automatically sync the same
folders. It can be used to sync two folders on the same computers or two folders located on
a computer and a removable medium.
See also
 Syncing Folders →32
 Creating Standalone Nero BackItUp SyncTool → 50
Nero BackItUp
69
Technical Information
18
Technical Information
18.1 System Requirements
Nero BackItUp is part of the Nero product you have installed. Its system requirements are
the same. Detailed system requirements of this and all other Nero products can be found in
the Support section on our Web site www.nero.com.
Nero BackItUp
70
Glossary
19 Glossary
Backup
Copying data from the computer to an alternative storage medium. Backups are created in a
special format with the help of a backup program.
Bootable CD
Booting refers to loading the operating system when a computer is started. This is normally
done from the hard drive. However, if you do not want to boot or cannot boot your computer
from your hard drive for whatever reason, you can load an operating environment from the
drive with a boot CD.
FTP Server
An FTP server is a data storage unit that can be accessed through the Internet. Access is
usually anonymous. FTP servers are frequently used as storage locations for backups.
Master Boot Record MBR
The Master Boot Record (MBR) is located in the hard drive's first sector. It contains a boot
file that starts the operating system. It also defines the drive's partitioning.
Restore
Restore stands for restoring data to a previous condition or to copying data by using a backup copy that was created previously and a backup program, e.g. Nero BackItUp.
Shadow Copy
A shadow copy is a snapshot of a file at a certain point in time. The advantage is that you
can keep working with this file while the backup program, e.g. Nero BackItUp, backs up the
file in the background. This feature is particularly relevant when you want to save system
files, which are modified continuously by the system.
Nero BackItUp
71
Index
20
Index
Drive
Backing up .................................................... 25
Backing up with Nero BackItUp ImageTool.... 63
Access rights
Back up......................................................... 44
Restore ......................................................... 45
Autobackup
Change settings ............................................ 16
Setting up...................................................... 16
Storing online ................................................ 16
Turn off ........................................................ 18
Using Nero Online Backup ............................ 16
Drive backup ........................................ 24
About drive backup ....................................... 15
Enable verification ......................................... 27
Restore ......................................................... 40
Restore files .................................................. 37
Schedule ....................................................... 25
Select source ................................................ 24
Select target .................................................. 25
Settings ......................................................... 26
Without verification errors .............................. 60
Backup
Deleting a backup ......................................... 48
Drive ............................................................. 24
Encrypt ......................................................... 27
File ................................................................ 19
Folder ........................................................... 19
Job .................................................................. 9
Modify job ....................................................... 9
Overview ....................................................... 14
Partition ........................................................ 24
Schedule ....................................................... 31
Select compression level............................... 27
Set up expert options .................................... 42
Settings ......................................................... 26
Shutdown computer after backup .................. 27
Tasks ............................................................ 14
Backup type
Choose a backup type .................................. 31
Differential backup ........................................ 28
Full backup ................................................... 28
Incremental backup ....................................... 28
Overview ....................................................... 28
Select................................................. 21, 23, 25
Update backup .............................................. 28
Bootable disc.................................. 49, 60
Burn options ......................................... 43
Compression ........................................ 27
Computer
Shell context menu........................................ 53
Shutdown after backup ................................. 27
Conflict handling
Restore file backup ....................................... 40
Sync.............................................................. 33
Conventions, manual ............................. 5
CPU Control ......................................... 42
E-mail account
Account values .............................................. 56
Set up ........................................................... 56
E-mail notification ................................. 42
Enabling ........................................................ 43
Trigger events ............................................... 44
Encryption ............................................ 27
Expert options ...................................... 42
File backup ........................................... 19
About File backup ......................................... 14
Enable verification ......................................... 27
Filter.............................................................. 42
Restore files .................................................. 37
Schedule ............................................21, 23, 26
Select backup type ....................... 21, 23, 25, 26
Select source ................................................ 19
Select target ............................................ 20, 23
Settings ......................................................... 26
Filter
Create ........................................................... 57
Date .............................................................. 58
Exclude file.................................................... 59
Exclude path ................................................. 59
File extension ................................................ 58
Size............................................................... 59
FTP server
Set up ........................................................... 53
Transferring to Nero BackItUp ImageTool ..... 55
Log file .................................................. 42
Manual, conventions .............................. 5
Disc information ..................................... 8
Nero BackItUp
72
Index
Nero BackItUp ImageTool
Rewritable disc
Backing up to FTP server .............................. 64
Backing up to hard drive................................ 64
Create ........................................................... 49
Drive backup ................................................. 63
Erase disc ..................................................... 62
Execute Linux shell commands ..................... 62
Exit...........................................................62, 68
Explanation ............................................... 6, 60
Extract files from backup ............................... 66
FTP server .................................................... 67
Main screen .................................................. 61
Network ........................................................ 67
Restore drive backup .................................... 65
Restore single files ........................................ 66
Starting ......................................................... 60
User interface................................................ 61
Nero BackItUp SyncTool
Create ........................................................... 50
Create to disc ................................................ 50
Create to hard drive ...................................... 50
Create to removable medium ........................ 50
Explanation ............................................... 6, 69
Nero Kwik Media library backup
About Nero Kwik Media library backup .......... 14
Executing the backup .................................... 22
Restore the backup ....................................... 37
Nero LIVEBackup
Erase ............................................................ 51
Erase method................................................ 52
Erase with Nero BackItUp ............................... 8
Erase with Nero BackItUp ImageTool ............ 62
Schedule .............................................. 31
Scripting ............................................... 42
Shadow copy ........................................ 44
Start
From shell context menu ............................... 53
Via desktop icon .............................................. 7
Via start menu ................................................. 7
Start screen ............................................ 8
Status messages .................................. 44
Sync ............................................... 32, 32
Choose sync type.......................................... 33
Conflict handling...................................... 33, 36
Schedule ....................................................... 33
Select folder .................................................. 33
Sync type
Copy ............................................................. 34
Mirror ............................................................ 34
Overview ....................................................... 34
Partial mirror ................................................. 34
Partial synchronization .................................. 34
Update .......................................................... 34
About Nero LIVEBackup ............................... 10
Activating Nero LIVEBackup ......................... 11
Explanation ..................................................... 6
External backup target .................................. 13
Restore files .................................................. 37
Restore programs and files ........................... 40
Setting options .............................................. 10
System requirements ........................... 70
Nero Online Backup ............................. 16
Tooltips ................................................. 53
About Nero Online Backup ............................ 14
User interface ......................................... 8
Program
Starting the program ....................................... 7
Proxy
Enable .......................................................... 55
Settings ......................................................... 55
Verification
Ignoring time difference ................................. 45
Version ................................................... 6
Purge options ....................................... 43
Window
Remote settings ................................... 53
Restore
Erase Rewritable Disc ................................... 51
Work overview ........................................ 5
Drive backup ................................................. 40
File backup ................................................... 37
Migrate user specific folders .......................... 39
Own path ...................................................... 39
Resolve conflicts ........................................... 40
Set up expert options .................................... 42
To another hard drive .................................... 41
To original hard drive .................................... 41
To original path ............................................. 39
Nero BackItUp
73
Contact
21
Contact
Nero BackItUp is a Nero AG product.
Nero AG
Im Stoeckmaedle 18
Internet:
www.nero.com
76307 Karlsbad
Help:
http://support.nero.com
Germany
Fax:
+49 724 892 8499
330 N Brand Blvd Suite 800
Internet:
www.nero.com
Glendale, CA 91203-2335
Help:
http://support.nero.com
USA
Fax:
(818) 956 7094
E-mail:
[email protected]
Rover Center-kita 8F-B, 1-2-2
Nakagawa-chuou Tsuzuki-ku
Internet:
www.nero.com
Yokohama, Kanagawa
Help:
http://support.nero.com
Nero Inc.
Nero KK
Japan 224-0003
Copyright © 2011 Nero AG and its licensors. All rights reserved.
Nero BackItUp
74
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement