Praktica LM14-04 User Manual

Praktica LM14-04 User Manual
Table of Contents
Preface ........................................................................................................ 3
About this Manual .................................................................................. 3
Safety and Handling Precautions.............................................................. 3
Using this Menu ..................................................................................... 4
Introduction ................................................................................................. 5
System Requirements ............................................................................. 5
Main Features ........................................................................................ 5
Package Contents................................................................................... 6
Camera Views ........................................................................................ 7
Camera Buttons ..................................................................................... 8
Navigation Control.................................................................................. 9
Camera Memory................................................................................... 10
Getting Started ........................................................................................... 10
Attach the Camera Strap ....................................................................... 10
Inserting the Battery ............................................................................ 10
Inserting an SD/SDHC Memory Card ...................................................... 11
Charging the Battery ............................................................................ 11
Turning the Power On and Off ............................................................... 12
Initial Settings...................................................................................... 12
Modes ................................................................................................. 12
Using the LCD monitor ................................................................................ 13
LCD Monitor Layout .............................................................................. 13
Changing the LCD Monitor Display ......................................................... 18
Recording Images, Videos and Voices ........................................................... 18
Taking Images ..................................................................................... 18
Using the Stabilizer............................................................................... 19
Setting the Zoom Control ...................................................................... 19
Using Flash .......................................................................................... 20
Setting the Focus Mode ........................................................................ 20
Using the Function Menu ...................................................................... 21
Using the Record Menu......................................................................... 25
Setting the Scene Mode ........................................................................ 25
Using Voices Recording ......................................................................... 33
Recording Videos.................................................................................. 38
Playback .................................................................................................... 40
Viewing in Single Navigation.................................................................. 40
Viewing Thumbnails ............................................................................. 41
Zooming images................................................................................... 42
Playing Videos...................................................................................... 42
Playing Voice Recording ........................................................................ 43
Playing Voice Memo.............................................................................. 43
Deleting an Image/Video/Audio ............................................................. 44
Playback Menu ..................................................................................... 44
Using the Setup Menu ................................................................................. 53
Setting Sounds..................................................................................... 53
1
Setting Power Save............................................................................... 53
Setting LCD Save.................................................................................. 54
Setting Date & Time ............................................................................. 54
Setting Language ................................................................................. 54
Setting File Numbering ......................................................................... 54
Setting TV Out ..................................................................................... 55
Setting LCD Brightness ......................................................................... 55
Setting Memory Kit ............................................................................... 55
Reset All .............................................................................................. 56
Making Connections .................................................................................... 56
Connecting the Camera to a TV ............................................................. 56
Connecting the Camera to a PC ............................................................. 56
Connecting the Camera to a Printer ....................................................... 58
Setting the Print Mode Menu ................................................................. 58
Appendix.................................................................................................... 60
About Folder and File Names................................................................. 60
Troubleshooting .......................................................................................... 60
Specifications ............................................................................................. 61
2
Preface
About this Manual
This manual is designed to assist you in using your new digital camera. All information presented is as
accurate as possible but is subject to change without notice.
Copyright
This manual contains proprietary information protected by copyright. All rights are reserved. No part of this
manual may be reproduced by any mechanical, electronic or other means, in any form, without prior
written permission of the manufacturer.
© Copyright 2010
Federal Communications Commission (FCC) Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and to prevent
interference to radio and television reception. Use only shielded cable to connect I/O devices to this
equipment. Any changes or modifications not expressly approved by the manufacturer may void your
warranty and service agreement.
Declaration of Conformity
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired
operation.
Trademark Recognition
Windows 2000/XP/Vista/Win7 are registered trademarks of Microsoft Corporation in the United States
and/or other countries. Windows is an abbreviated term referring to the Microsoft Windows Operation
System. All other companies or product names are trademarks or registered trademarks of their respective
companies.
Safety and Handling Precautions
Camera Information
•
•
•
•
•
•
Do not take apart or attempt to service the camera yourself.
Do not expose the camera to moisture, or extreme temperatures.
Allow the camera to warm up when moving from cold to warm temperatures.
Do not touch the camera lens.
Do not expose the lens to direct sunlight for extended periods.
Do not use abrasive chemicals, cleaning solvents or strong detergents to clean the product. Wipe the
product with a slightly damp soft cloth.
3
Battery Information
• Turn off the camera before installing or removing the battery.
• Use only the provided batteries or type of battery and charger that came with your camera. Using
other types of battery or charger may damage the equipment and invalidate the warranty.
• When using Li-ion battery in this product, ensure that they are inserted correctly. Inserting the
battery upside down can cause damage to the product and possibly cause an explosion.
• When the camera is used for an extended period of time, it is normal for the camera body to feel
warm.
• Download all pictures and don’t remove the battery from the camera if you are going to store the
camera for a long period of time.
• The type of battery and the battery power level may cause the lens to be stuck up. Ensure you use
the correct battery type and use a fully charged battery.
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
Using this Menu
Symbols used in this manual are explained below:
This indicates useful information when using your camera.
This indicates important message that should be read before using the function.
4
Introduction
Congratulations on your purchase of the new digital camera.
Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera.
System Requirements
In order to get the most out of your camera, your computer must meet the following system requirements:
For Windows:
• Windows 2000/XP/Vista/Win7
• Processor: Pentium II 450MHz or above
• Memory: 512MB or above
• HDD space: 200MB or above
• 16bit color display monitor
• Microsoft DirectX 9.0C
• USB port and CD-ROM drive
For Macintosh:
• Power Mac G3 or later
• Mac OS 10.3X~10.6 <Mass storage>
• Memory: 512MB or above
• Q.Time player ver. 6.0.3 or above
• USB port and CD-ROM drive
Main Features
•
•
•
•
•
•
•
•
•
•
14 mega pixels resolution
Up to 3x optical zoom and 5x digital zoom
3 inch color LCD monitor
64MB internal flash memory with optional external SD/SDHC card
Supports up to 4GB of SD card, and up to 32GB of SDHC card
Easy-to-use button interface
DCF, DPOF, PictBridge compatibility
Slideshow to review still images
A/V output to view your images, videos and audio on your TV
USB port to transfer images, videos and audio to your PC
5
Package Contents
Please check the contents of your camera package. It should contain:
Digital camera
Rechargeable battery x 1 pcs
Battery charger
Wrist strap
USB cable
AV cable (optional)
CD-Rom
Quick Start Guide/
User Manual (optional)
Camera pouch
(optional)
6
Camera Views
Front View
1.
2.
3.
4.
Flash
Self-timer LED/
AF Assist Lamp
Lens
Microphone
Back View
5.
6.
7.
8.
9.
10.
LCD monitor
Mode Switch
Photo mode
Movie mode
Playback mode
LED indicator
Menu button
SET button/4-way
navigation control
Function/
Delete button
Top View
11.
12.
13.
14.
7
Stabilizer button
Zoom dial
Shutter button
Power button
Bottom View
15.
Tripod screw hole
16.
17.
18.
Speaker
Battery/Memory card
compartment
USB/TV Out
19.
Strap ring
Left/Right View
Camera Buttons
Your camera is equipped with different buttons for ease of use.
Button
Description
Power
Press the Power button to turn the power on/off.
Stabilizer
The stabilizer sets the optimal ISO value according to light levels to compensate for
camera shake. Press to set stabilizer on/off.
Shutter
Press to capture an image or start/stop recording video or audio clip.
Zoom dial
In photo and movie mode, spin the zoom dial to left to zoom out, right to zoom in.
In Playback mode, spin to zoom in to magnify image or zoom out enter 9-image/calendar
thumbnails.
Menu
Press to enter or exit menu/submenu.
Function/Delete
In photo and movie mode, press to enter function menu.
In Playback mode, press to delete an image, video or audio clip.
8
Navigation Control
The 4-way Navigation Control and the SET button allow you to access the various menus available from
the On Screen Display (OSD). You can configure a wide range of settings to ensure maximum results from
your images and videos. Further functions of these buttons are as follows:
1
Ϥ
5
Ϥ
4
Ϥ
2
Ϥ
3
Ϥ
No.
Description
1
Face Tracking/Rotate Button
2
Macro Button
3
Display/Help Button
4
Flash Button
5
SET Button
Button
Description
SET
1. Confirm a selection when using the OSD menus.
2. In Playback Movie/Audio mode, press to start video or audio playback.
Flash/Right
1. In Photo Mode, press to scroll through the flash mode options.
(Auto, Anti Red-eye, Fill, Slow Sync and Off)
2. In Playback mode, press to view the next image, video or audio clip.
3. In playback Movie mode, press to Forward video playback.
4. In Menu, press to enter the submenu or to navigate through the menu selections.
Macro/Left
1. In Photo Mode, press to scroll through Macro options.
(Macro, Pan Focus, Infinity and normal)
2. In Playback mode, press to view the previous image, video or audio clip.
3. In playback Movie mode, press to Rewind video playback.
4. In Menu, press to exit a submenu or to navigate through the menu selections.
Up/Face Tracking/
Rotate
1. In Photo Mode, press to turn the face tracking function on and off.
2. Playing Video/Audio file, press to Pause/Start video or audio playback.
3. In Playback photo mode, press to rotate the image clockwise 90 degrees by each
press of the button. This feature is applicable for still images only.
4. In Menu, press to navigate through the menu and submenu selections.
Display/Down
1. The LCD display can be changed into 5 different types such as Basic, Full, None,
Guideline and Help screen
2. In Playback Movie/Audio mode, press to stop video/audio playback.
3. In Menu, press to navigate through the menu and submenu selections.
9
Camera Memory
Internal memory
Your camera is equipped with 64MB of internal memory. Users can store images up to 14MB. If there is no
memory card inserted in the memory card slot, all images, videos and audio clips recorded are
automatically stored in the internal memory.
External storage
Your camera supports SD cards of up to 4GB in size. It also supports SDHC cards with a maximum capacity
of 32GB. If there is a storage card inserted in the memory slot, the camera automatically saves all images,
videos and audio clips in the external storage card. The icon
indicates the camera is using SD card.
Not all cards may be compatible with your camera. When purchasing a card, please
check the card's specifications and take the camera with you.
Getting Started
Attach the Camera Strap
Inserting the Battery
Follow these instructions to insert the rechargeable battery into the battery/memory card compartment.
Please read "Battery Information" on page 4 before inserting/removing batteries.
1. Make sure the power is off before inserting the battery.
2. Unlock and open the battery/memory card compartment at
the bottom of the camera.
3. Insert the battery into the compartment with the terminal
facing inside the camera with correct orientation as shown.
10
4. Close and lock the battery/memory card compartment
Inserting an SD/SDHC Memory Card
Expand your camera’s storage by using SD or SDHC memory
cards.
1. Unlock and open the Battery/memory card compartment at
the bottom of the camera.
2. Insert the SD/SDHC card into the memory card slot with the
metallic part facing the front side of the camera.
3. Push the SD/SDHC card into the memory slot until it clicks
into place.
4. Close and lock the Battery/memory card compartment.
To remove the SD/SDHC card
1. Unlock and open the Battery/memory card compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
Charging the Battery
The battery is not charged when you purchase the camera. You need to charge the battery before using
the camera.
1. Place the battery in the charger as shown.
2. Plug it into a power outlet.
• The light of the LED on the charger is orange when
charging is started and lights green when charging is
completed.
• It is recommended that you fully discharge the battery
before recharging.
• Charging time varies according to the ambient
temperature and the status of battery.
The battery may feel warm after it has been charged or immediately after being used.
This is normal and not a malfunction.
When using the camera in cold areas, keep the camera and battery warm by holding
them inside your outer clothes.
11
Turning the Power On and Off
There are two ways to turn on the camera:
• The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends and
the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens are not extended.
To turn off the camera, press the Power button.
See "Modes" on page 12 to know more about Record and Playback mode.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your camera.
First is the setup of language menu. Specify in which language menus and messages are to be displayed on
the LCD monitor.
Setting the Language
1. Press
, ,
or
to move through the selection.
2. Select a language, and then press SET to apply.
Setting the Date & Time
1. Press
or
to move through the selection.
or
keys to change the value for the date and time.
2. Press
3. Press SET to apply.
4. If necessary, press
to close the menu.
Now, you are ready to start taking images and videos.
Holding down
or
keys to change the values continuously.
Modes
Your camera has three modes:
Photo Mode
• Slide the mode switch to [ ] to capture images.
You can record audio clips by selecting Voice REC from scene mode in this mode.
Movie Mode
• Slide the mode switch to [
] to record videos.
Playback mode
• Slide the mode switch to [ ] to view and edit captured images or playback videos and audio clips.
The recording of voice memo attached to images is available in this mode.
12
Using the LCD monitor
The LCD monitor shows all important information regarding camera settings as well as the visual image of
your image or video. The display on the LCD monitor is called the On Screen Display or OSD.
LCD Monitor Layout
Photo Mode Screen Layout
No
Item
Description
1
Record Mode
Indicates the current mode.
2
Flash
Indicates flash settings.
3
Self-timer/Burst
Indicates drive mode settings.
4
Zoom indicator
Displays zoom.
5
Shots remaining
Indicates the remaining shots available.
6
Battery
Indicates battery level.
7
Storage media
Indicates current storage media in use.
8
Date stamp
Indicates date stamp is enabled.
9
AEB
Indicates AEB function is enabled
10
Stabilizer
Indicates stabilizer function is enabled.
11
Saturation
Displays saturation settings.
12
Contrast
Displays contrast settings.
13
Histogram
Graphic display of Brightness.
14
ISO
Displays ISO settings.
15
Focus area
Use to frame subject to capture.
16
Shutter speed
Displays shutter speed settings.
17
Aperture value
Displays aperture settings.
18
Shake warning
Indicates that the camera is shaking.
19
Macro
Indicates macro is enabled.
20
Exposure
Displays exposure settings.
21
Face tracking
Indicates face tracking is enabled.
22
White balance
Displays white balance settings.
23
Metering
Displays metering settings.
24
Sharpness
Displays sharpness settings.
25
Quality
Displays quality settings.
26
Photo size
Displays photo size settings.
27
AF lamp
Indicates AF lamp is enabled.
13
Movie Mode Screen Layout
Standby layout
No
Recording Layout
Item
Description
1
Record Mode
Indicates the current mode.
2
Zoom indicator
Displays zoom.
3
Time remaining
Indicates the remaining time of video available.
4
Battery
Indicates battery level.
5
Storage media
Indicates current storage media in use.
6
Focus area
Use to frame subject to record.
7
Macro
Indicates macro is enabled.
8
White balance
Displays white balance settings.
9
Metering
Displays metering settings.
10
Movie size
Displays movie size settings.
11
Key indicator
Displays the commands on 4-way Navigation Control button
12
Recorded time
Displays recorded time.
13
Recording status
Indicates recording status.
14
Pre-record
Indicates pre-record is enable
The Pre-Record icon appears on the screen in red color as the same position as zoom
indicator.
14
Playback Mode Screen Layout
The Playback mode display varies depending on the type of image being viewed.
Playback mode display of still images:
No
Item
Description
1
Playback mode
Indicates playback mode.
2
Protect
Indicates file is protected.
3
Voice memo
Indicates voice memo is attached.
4
Button intro
Indicates the button to press on the camera to play a video or audio file.
5
File no./Total no.
Indicates the file number over the total number of files in the storage card.
6
Battery
Indicates battery level.
7
Storage media
Indicates used storage memory.
8
Recording
information
Displays recording information of the file.
9
DPOF
Indicates the file is marked for printing.
10
Image Size
Displays the image size settings.
15
Playback mode of videos:
No
Item
Description
1
Playback mode
Indicates playback mode.
2
Protect
Indicates file is protected.
3
Video clip
Indicates the file is a video.
4
Button intro
Indicates the button to press on the camera to play a video or audio file.
5
File no./Total no.
Indicates the file number over the total number of files in the storage card.
6
Battery
Indicates battery level.
7
Storage media
Indicates used storage memory.
8
Recording date &
time
Displays the date and time of the video clip.
9
Video size
Indicates the size of the video clip.
10
Volume
Indicates the volume while playing.
11
Video length
Display the total length of the video clip.
12
Played time
Indicates the played time of the video.
13
Playing status
Displays playing status.
14
Capture image
Capture the screenshot and save.
16
Playback mode of audio clips:
No
Item
Description
1
Playback mode
Indicates playback mode.
2
Protect
Indicates file is protected.
3
Button intro
Indicates the button to press on the camera to play a video or audio file.
4
File no./Total no.
Indicates the file number over the total number of files in the storage card.
5
Battery
Indicates battery level.
6
Storage media
Indicates used storage memory.
7
Recording
information
Displays recording information of the file.
8
Volume
Indicates volume settings.
9
Audio length
Display the total length of the audio clip.
10
Played time
Indicates played time.
11
Playing status
Displays playing status.
17
Changing the LCD Monitor Display
The type of information displayed on the LCD monitor can be changed using the
button. Press the
button repeatedly to change the LCD display from one type to another. In Photo/Movie Mode, the LCD
display can be changed into any of the following:
• Basic
• Full
• None
• Guideline
• Help screen
• The OSD information may vary depending on the record mode type.
• The following icons, if enabled, are still displayed on the LCD even when OSD off or
Guide lines on: AEB, Face tracking, AF lamp, Drive mode, and Macro.
• Use the "Guide lines" to properly set image for capture.
In Playback mode, the LCD display can be changed into any of the following:
• Basic
• Full
• None
• Help screen
LCD display cannot be changed in the following situations:
• Manual exposure mode
• Recording video or audio clips
• Playing video or audio clips
• Playing slideshow
Recording Images, Videos and Voices
Taking Images
Now that you are familiar with your camera, you are now ready to take your images. Taking images with
your camera is very simple.
1. Turn on the camera by pressing the Power button.
2. Slide the Mode switch to Photo mode
.
3. Frame the shot using the focus bracket on the LCD monitor.
See illustration on the right.
4. Pressing the Shutter button down halfway automatically
focuses and adjusts the exposure, and pressing the Shutter
button down fully captures the images.
appears, hold the camera
When the shake warning icon
steadily, with your arms at your side or use a tripod to stabilize
the camera to prevent blurred images.
18
Using the Stabilizer
The Stabilizer function works according to the luminance of the target object. This function uses special
image data processing for getting high sensitivity of CCD. High sensitivity can use higher shutter speed
compared with normal mode, so it reduces influence of hand shaking. Press the stabilizer button before
pressing the Shutter button.
Stabilizer button
To activate Stabilizer
• Press the Stabilizer button on top of your
camera to enable/disable stabilizer.
If Stabilizer is enabled, the stabilizer icon is
displayed on the LCD monitor and the ISO setting
is automatically set to Auto. See "ISO" on page 23
for more details.
Stabilizer on
Setting the Zoom Control
Using a combination of 3 times optical zoom and 5 times digital zoom permits zoom photography at up to
15 times magnification. While the digital zoom can be a useful feature, the more an image is enlarged
(zoomed), the more pixelated (grainier) the image will appear. Please refer to "Setting the Digital Zoom"
on page 37 on how to setup digital zoom.
To adjusts the optical zoom:
1. Spin the Zoom dial to zoom in or zoom out an image.
2. The zoom indicator appears on the LCD monitor.
Zoom dial
1.
2.
Spin the dial clockwise (right) to zoom in.
Spin the dial counterclockwise (left) to zoom out.
To adjusts the digital zoom:
1.
2.
3.
Activate digital zoom. See "Setting the Digital Zoom" on page 37.
Spin the Zoom dial clockwise/counterclockwise optically zooms in/out to the maximum until it
stops.
Release the Zoom dial.
Optical zoom 1X to 3X
Digital zoom 1X to 5X
Digital zoom is not activated in recording videos.
19
Using Flash
When taking pictures in difficult lighting conditions, use the Flash/Right button to get correct exposure.
This function cannot be activated in recording videos or continuous shooting.
To activate Flash:
• Press the Flash/Right button on your camera
repeatedly until your desired flash mode is displayed on
the LCD monitor.
Your camera is equipped with five flash modes:
Flash/Right
button
Auto flash is enabled
AUTO. The flash fires automatically whenever extra
lighting is needed.
Red-eye reduction. The flash fires twice to reduce the
red-eye effect.
Forced on. The flash fires whenever you press the
Shutter button regardless of lighting
conditions.
Slow sync. The flash fires with a slow shutter speed.
Forced off. The flash is turned off.
• Flash function is only available in shooting still images but not available in Burst
and AEB modes.
• Do not charge the flash while spinning the Zoom dial. Charge the flash after
releasing the zoom dial if necessary.
Setting the Focus Mode
This function allows users to define the type focus when recording a still image or a video clip.
To set the Focus mode
• Press the Macro/Left button repeatedly until the desired focus mode icon is displayed on the lower
left corner of the LCD monitor.
Macro/Left button
Your camera supports the four focus modes:
Normal. With normal focus, the focus range starts from 0.1m.
When the camera is set to Normal mode, there is no
icon displayed on the screen.
Macro. This mode is designed for close-up photography. If
Macro is enabled, you can capture the detail and
sharpness of a very close image by fixed focus.
Pan Focus. The function of auto focus finds the best proper
position from 9 blocks of focus area.
Infinity. When Infinity is set, the camera focuses on
distant objects.
20
Macro enabled
Using the Function Menu
The Function Menu is used to adjust capture settings in Photo Mode. It contains My Mode, Photo Size,
Quality, EV Compensation, White Balance, ISO, Metering, and Color Mode.
Press the FUNC button of your camera to launch the Function Menu.
Press the FUNC button again to close the menu.
Menu Options
• The Menu bar displays the current status
of your camera settings. Only the available
functions for the settings are shown as
icon on the menu bar.
• The available options for each item on the
menu bar are shown in the Menu options.
• Use the
or
key to move through
the menu selections then press the SET
button to save and apply changes.
Menu bar
My Mode
The My Mode function displays the 5 most recent modes used
in order. When you move through the different modes in the
menu options, the items on the menu bar changes
synchronously to the corresponding available settings.
Photo Size
The Photo Size function is used to set the resolution before
you capture the image. Changing the Photo Size affects the
number of images that can be stored in your memory card.
The higher the resolution, the more memory space is
required.
The table below shows the Photo Size values for still images.
Icon
Pixel Size
Printing Size
Suggestion
Pixel Size
Printing Size
Suggestion
4320 x 3240
A2 Size
2048 x 1536
4" x 6"
4320 x 2880
Standard print paper
1920 x 1080
HDTV
3264 x 2448
A3 Size
640 x 480
E-mail
2592 x 1944
A4 Size
Icon
21
Quality
The Quality sets the quality (compression) at which the image is
captured. The quality determines the amount of compression
applied to your images. Fine quality would give you the best
images with sharper details and less compression. However, the
higher the quality, the more memory space is required in your
memory card.
EV Compensation
Images can be captured with the overall scene intentionally
made brighter or darker. These settings are used when a
suitable brightness (exposure) cannot otherwise be obtained in
circumstances where the difference in brightness between the
subject and the background (the contrast) is large, or when the
subject that you wish to capture is very small within the scene.
Available for still images only.
• To adjust EV settings, press the
or
keys to
increase/decrease the value. As you adjust the settings,
the LCD monitor synchronously displays the image
applying the EV settings. Press the SET button to save and
apply changes.
22
White Balance
This sets the white balance for a variety of lighting conditions
and permits images to be captured that approach the
conditions that are seen by the human eye.
• As you move through the selection, you can see the
preview on the LCD monitor synchronously.
Icon
Item
Description
Auto White
Balance
The camera automatically adjusts the white balance.
Daylight
Ideally used for bright sunny conditions.
Cloudy
Ideally used for cloudy conditions.
Tungsten
Ideally used for indoor images with tungsten or halogen lighting without a
flash.
Fluorescent 1
Ideally used for indoor images with reddish fluorescent lighting conditions.
Fluorescent 2
Ideally used for indoor images with bluish fluorescent lighting conditions.
Custom
Used when light source cannot be specified.
Press the Shutter button for the camera to automatically adjust the
appropriate white balance setting according to the environment.
ISO
This sets the sensitivity for capturing images. When the
sensitivity is raised (and the ISO figure is increased),
photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear.
• Use a higher ISO setting in dim conditions and a lower ISO
setting in brighter conditions.
If the Stabilizer is enabled, ISO is automatically set to Auto and cannot be adjusted.
To adjust ISO disable Stabilizer first.
23
Metering
This sets the metering method for calculating the exposure.
Icon
Item
Description
Multi
The entire area of the screen is measured, and the exposure is calculated.
Center
Averages the light metered from the entire frame, but gives greater weight
to the subject matter at the center.
Spot
A very small portion of the center of the screen is measured, and the
exposure is calculated.
Color Mode
The Color Mode function applies different colors or tones for a
more artistic effect on the still images or videos.
• As you move through the selection, the preview on the
LCD monitor changes synchronously.
Icon
Item
Description
Normal
The camera records normally.
Vivid
The camera captures the image with more contrast and saturation
emphasizing on the bold colors.
Sepia
Images are captured in sepia tones.
B&W
Images are captured in black and white.
Vivid Red
Captured image becomes reddish. Ideally used to record images like
flowers and cars to make them more vivid.
Vivid Green
Captured image becomes greenish. Ideally used to record images like
mountains and lawns to make them more vivid
Vivid Blue
Captured image becomes bluish. Ideally used to record images like the sky
and the ocean to make them look more vivid.
24
Using the Record Menu
If you are in Photo Mode, you can access the Record menu simply by pressing the MENU button
on
your camera.
When the menu is displayed, use the 4-way navigation control and the SET button to move through menu
selections and apply your desired settings. To close the menu anytime, press the menu button again.
Record Menu
The Record menu allows you to change modes, and setup other
capture settings.
To go to Record Menu:
Set the mode switch Photo Mode [
].
1.
2.
3.
4.
Press
to launch the Record Menu.
Use the
or
keys to move through the menu
To select an item, press
or SET button.
Change the submenu settings using the 4-way navigation
control.
5. Press the SET button to save and apply settings.
Setting the Scene Mode
By simply selecting one of the following 32 modes, you can
capture the image with the most appropriate settings.
1. From the Record Menu, press to select Scene Mode.
2. Use the navigation controls to move through the selection.
3. Press the SET button to save and activate the selected
scene mode.
While using scene mode menu:
• Spin the Zoom dial clockwise (right) to
enter the Help screen for scene mode
selection.
• Spin counterclockwise (left) to go back
scene mode menu.
25
The table below shows the available scene mode settings.
Icon
Item
Description
Auto
The simplest way to shoot basic images. Settings are adjusted
automatically.
Program
The camera automatically adjusts suitable shooting settings like shutter
speed and aperture values.
Intelligent Scene
The camera detects the shooting conditions and automatically switches to
the appropriate scene mode.
Portrait
The camera blurs the background to focus on the subject.
Landscape
This feature is used to emphasize wide scenic views.
Sunset
This feature enhances the red hue for recording sunset images.
Backlight
This feature is used to capture the image of a backlight object by
changing the metering.
Kids
This feature is used to capture still images of moving kids.
Night Scene
This feature is used to capture images with night scenery background.
Fireworks
This feature slows shutter speed to capture fireworks explosions.
Snow
This feature is used for beach and snow scenes.
Sports
This feature captures still images in high speed motions.
Party
This feature is used for wedding or indoor party settings.
Candlelight
This feature is used to capture warm candle light effects.
Night Portrait
This feature is used to capture portrait pictures with night or dark
background.
Soft Skin
This feature enhances skin tone thus facial skin appears smooth.
Flowing Water
This feature enhances smooth effects like water or silk.
Food
This feature is used to capture food images. The increased saturation in
this mode makes the captured image more enticing.
26
Building
This feature enhances the edges of captured images.
Text
This feature enhances the black and white contrast normally used when
capturing text images.
Foliage
This feature boosts the saturation of greens to give a rich color to foliage.
Auction
This feature combines up to 4 shots into a single image and provides 4
patterns to select for usage of auction.
Smile Capture
This feature uses face tracking to auto detect faces to capture. When
smiles are detected, it continuously captures the image.
Blink Detection
This feature detects if the subject blinked an eye when the image is
captured and gives the user an option whether to save it or not.
Pre-composition
This feature captures a image temporarily as a reference. Full press
shutter after referring the subject to the reference point.
Love Portrait
This feature uses face tracking to auto detect faces to capture portraits
images without the help of others. When over two faces are detected, AF
is automatically activated. The camera starts count down and captures a
picture in two seconds.
Self Portrait
This feature set zoom to wide end. When one face is detected, AF
automatically activated and plays the sound (Bi) for notice. Then camera
starts count down and captures a picture in two seconds.
HDR
This feature applies digital processing only to the necessary portion(s) of
the image and preserves details in highlights and shadows with natural
contrast.
Aperture Priority
This feature lets users to adjust the aperture value and the camera
automatically selects the shutter speed to match the brightness.
Shutter Priority
This feature lets users to adjust the shutter speed and the camera
automatically selects the aperture value to match the brightness.
Manual Exposure
This feature lets users to adjusts the shutter speed and aperture value to
correctly expose your images.
Voice REC
This mode is used to record audio clips.
After selecting the scene mode, the selected mode, except Voice Rec, will be added to the forefront in My
Mode of Function Menu. In the Menu Options, the Auto mode is fixed and the other 5 items can display
the most recent used modes. See "Using the Function Menu" on page 21.
27
Using Intelligent Scene
This feature is most useful for novice users to capture great images even without basic knowledge of
photography. Simply frame the shot with the help of Intelligent Scene Mode, the camera automatically
recognizes 11 kinds of scenes - Portrait, Landscape, Sunset, Macro, Text, Snow, Backlight, Backlight
Portrait, Night Scene, Night Portrait and Foliage - and selects the ideal settings.
Intelligent scene icon. After the camera detects the shooting
conditions, this icon changes to show the detected scene
mode.
The camera changed to Landscape mode
automatically.
To activate Intelligent Scene
1. Select from the Scene Mode submenu.
2. Focus the camera on the subject to capture.
3. The camera detects the shooting conditions
and switches to an appropriate scene mode.
4. Half press the Shutter button to focus the
subject. The frame turns green to indicate
focus is set.
5. Press the Shutter button to take the shot.
Using Kids Mode
Tactically, kids are the most difficult to photograph. They tend
to be highly animated and can be a real challenge to make
them pay attention for more than just a second or two. To
capture a great moment for your kids, just keep the camera in
kid mode. The mode provides higher shutter speed and
always focuses on moving subject.
Using Sports Mode
When you need a series of sports motion images, such as a golf swing, or try to capture the images of a
flying hummingbird/butterfly, be sure to switch the scene mode to sports mode. This mode provides
shutter in Burst speed (Keep shooting images long as the Shutter button is pressed) which allows you to
capture a sequence of pictures that are frames apart clearly.
Make sure you have plenty of memory in your memory card as you will need it when you start
shooting.
28
Using Party Mode
Let the Party mode on! It can be difficult to get everyone on a party. While you have the whole gang
together, take a group or family portrait. Party mode features on Red-eye reduction flash and face tracking.
You’ll miss fewer shots, and have more time to focus on enjoying the party.
Using Soft Skin mode
When the soft skin mode is activated, it makes wrinkles and lines look less conspicuous, while preserving
resolution in areas of the picture outside of the skin. The camera detects skin color area, such as the face
and processes the image to make the skin appear smooth.
Using Food Mode
How to share your dining experiences and comments of
interesting widgets on your blog by close-up images? Just get
the camera and set the scene with food mode. This mode
features on macro focus and auto flash designed for close-up
photography.
Macro focus and Auto Flash are
enabled by using Food mode.
Using Foliage Mode
A scenic image, such as a garden or forest scene, that full of doll green colors is boring. In foliage mode,
the greens, blues, are brilliantly enhanced making scenic pictures pop out with bright color.
Using Auction Mode
It’s hard and waste a lot of time to combine several images by software. Select Auction mode and choose
a pattern, then take a few shots from different angle. The camera composes a combined image in lower
resolution suited to online posting.
1. Select Auction mode from Scene mode menu.
2. Use
or
keys to choose a pattern.
3. Press the SET button to start shooting.
4. Frame the subject and press the Shutter button to take
the first shot.
29
5. Press SET button to continue the second shot.
6. Or, press Menu button to go back the first shot.
7. Repeat step 4 to 6, until the pattern is filled in images.
8. Press SET button to save the composed image.
9. Or, press Menu button to go back last shot.
10.
11.
The camera save the image to memory.
Use USB cable or memory card reader (Please refer to
"Connecting the Camera to a PC" on page 56) to transfer
the image to PC and upload it to website.
Auction mode provides 4 kinds of pattern as follow
The image is set to low quality and VGA (640x480) size only.
30
Using Smile Capture Mode
When facing camera, especially kids, smiles are always short and hard to seize by manual shutter. Smile
capture mode detects every smile all the time and performs Automatic Focus (AF) to capture an image
without pressing Shutter button.
Follow the instructions to get a Happy image by Smile
Capture Mode:
1. Select Smile capture mode from scene menu.
2. Focus the camera on the subject to capture.
3. When a smile is detected, the white focus frame turns
green to denote camera shutter and take a shot
automatically.
Using Blink Detection Mode
Nothing ruins a great picture more than having your subjects' eyes closed. Blink Detection provides you
with extra assurance when capturing once-in-a-lifetime moments like holding a trophy with teammates
after winning a basketball game.
If closed eyes are detected, a saving confirmation menu appears on the screen, allowing you to re-take the
shot before your subject or subjects move on.
To activate Blink Detection
1. Select Blink Detection Mode from Scene Mode submenu.
2. Half press the Shutter button to focus the subject. The
frame turns green to indicate focus is set.
3. Press the Shutter button to capture the image and
automatically save the Image.
4. If the camera detects subject blinked eye, a "Save
image" or "Cancel" option appears on the screen.
5. Select Save image to save or Cancel to disregard
Using Pre-composition Mode
When asking someone else to take images for you, but the images always don’t come up right?
Pre-composition helps you get the background you want,
even if you need to ask someone else to record the
image for you.
Basically, Pre-composition is a two-step process.
1. Compose the background you want and press the
Shutter button (full press), which causes a
semi-transparent image of the background to remain on
the LCD monitor. Press Menu button to cancel the
semi-transparent temporarily image.
2. Ask someone else to record a shot of you against your
original pre-composed background, telling him/her to
compose the image by using the semi-transparent screen
image as a guide.
31
3. Move your position until photographer confirm your whole
or half body in the frame and in the right place.
4. Press the Shutter button. Camera stores the image
produced by this step only.
Using Love Portrait
Want to take a good image when there are just two of you? All you have to do is hold the camera and show
your smiles together.
If over two faces had been recognized, the camera performs 2-second countdown with a beep notice then
take a shot without pressing the Shutter button.
Using Self Portrait
When you are the one taking the picture for yourself, then self portrait mode is necessary besides the
tripod. With your long arm’s help, the camera begin face tracking in self portrait mode. If a face had been
recognized, the camera performs 2-second countdown with a beep notice then take a shot without
pressing the Shutter button.
Tips
•
•
•
to make a great shape by self portrait photography:
Lean in towards the camera to reduce double chin.
Angle your body and bend your arms to look slimmer.
Keep your shoulders back.
Using HDR Mode
Active HDR mode preserves details in highlights and shadows, creating photos with natural contrast. Use
for high contrast scenes, for example, when photographing brightly light outdoor scenery through a
door/window, or taking pictures of shaded subjects on a sunny day. With this feature, the adjustment of
contrast is accomplished in-camera and requires no additional post-processing for the bulk of images.
Using Aperture Priority Mode
This mode is designed for control the aperture value by user and let camera decide the shatter speed. The
main impact that aperture had on images was with regards to Depth of Field. (DOF)
• Choose lager aperture, only one subject in focus but the background nice and blurred. (Shallow DOF)
• Choose smaller aperture, an image with everything in focus. (Great DOF)
To set Aperture values
1. Select Aperture Priority Mode from the Scene Mode
submenu.
2. Press SET button to enter the adjust mode.
or
keys to select the aperture value
3. Use the
options.
4. Press the Shutter button to capture the image.
Displays the aperture value
32
Using Shutter Priority Mode
This mode is designed for capturing moving subjects. A faster shutter speed is required to freeze a motion
(flying birds), while the slower shutter speed creates a sense of motion (water flowing).
To set Shutter values
1. Select Shutter Priority Mode from the Scene Mode
submenu.
2. Press SET button to enter the adjust mode.
3. Use the
or
keys to select the shutter value
options.
4. Press the Shutter button to capture the image.
Displays the shutter value
Using Manual Exposure
When the camera is in the manual exposure mode, you can change either aperture or shutter speed, or both.
To activate Manual Exposure
1.
2.
3.
4.
5.
Select from the Scene Mode submenu.
Press SET button to enter the adjust mode.
or
keys to select the shutter speed.
Use the
Or, use the
or
keys to select the aperture value.
Use the SET button to switch between aperture and
shutter speed adjustment and vice versa.
6. Press the Shutter button to capture the image.
Displays the aperture and
shutter speed value
Using Voices Recording
1. From the Scene menu, select Voice REC. The Voice
Recording screen layout is displayed on the LCD monitor.
2. Press the Shutter button to start recording.
3. Press the Shutter button again to stop recording.
33
Setting the Drive Mode
Your camera features a Self-timer and Burst which can be set
in the Drive mode function in the Record Menu. The Self-timer
allows you to take images after a pre-defined delay. While
burst lets you take consecutive shots. This function is only
available in recording still images. The Drive mode setting is
automatically set to off when you turn off the camera.
To set the Drive Mode
1. From the Record menu, select Drive Mode.
or
keys to go through the selection.
2. Use the
3. Press the SET button to save and apply changes.
The table below shows the available Drive mode settings.
Icon
Item
Description
10 Sec.
Sets a 10-second delay to capture image after pressing the Shutter button.
2 Sec.
Sets a 2-second delay to capture image after pressing the Shutter button.
Double.
Performs delay and capture twice:
• Performs a 10-second delay, then captures the image.
• Performs another 2-second delay then captures the image again.
Burst
Performs continuous shooting when the Shutter button is pressed.
Stops shooting when the Shutter button is released.
Speedy Burst
Captures 30 images in a shot when the Shutter button is pressed.
Auto set Image size to VGA only.
Off
Captures an image without time delay.
34
Setting the AEB
AEB stands for Automatic Exposure Bracketing. It permits 3 consecutive images in the order of standard
exposure, under exposure and overexposure compensation.
To set AEB
1. From the Record menu, select AEB.
2. Use the
or
keys to go through the selection.
3. Press the SET button to save and apply changes.
Setting the AF Area
AF stands for Automatic Focus. This feature determines the
area on which the camera focuses.
To set AF Area
1. From the Record menu, select AF Area.
2. Use the
or
keys to go through the selection.
3. Press the SET button to save and apply changes.
The table below shows the available AF area settings.
Icon
Item
Description
Wide
The camera automatically selects focus area within the wide frame.
Center
The focus area is fixed on the center.
Setting the AF Lamp
The AF Lamp function allows you to record images even low
light conditions.
If AF Lamp is set to Auto, the AF lamp located in the front of
the camera, see "Front View" on page 7, emits an red light by
half pressing the Shutter button allowing the camera to focus
easily.
To set AF Lamp
1. From the Record menu, select AF Lamp.
2. Use the
or
keys to go through the selection.
3. Press the SET button to save and apply changes.
35
Setting Sharpness
This function allows you to enhance or soften finer details of
your images.
To set Sharpness
1. From the Record menu, select Sharpness.
2. Use the
or
keys to go through the selection.
3. Press the SET button to save and apply changes.
The table below shows the available Sharpness settings.
Icon
Item
Description
High
Sharpens the image.
Normal
Normal sharpness.
Low
Softens the image.
Setting Saturation
The Saturation function lets you adjust the color saturation in
your images. Use a higher saturation setting for rich colors
and a lower saturation setting for more natural tones.
To set Saturation
1. From the Record menu, select Saturation.
2. Use the
or
keys to go through the selection.
3. Press the SET button to save and apply changes.
The table below shows the available Saturation settings.
Icon
Item
Description
High
Enhance the saturation.
Normal
Normal saturation.
Low
Reduce the saturation.
36
Setting Contrast
This function allows you to adjust the contrast of your images.
To set Contrast
1. From the Record menu, select Contrast.
2. Use the
or
keys to go through the selection.
3. Press the SET button to save and apply changes.
Icon
Item
Description
High
Enhance the contrast
Normal
Normal contrast
Low
Reduce the contrast
Setting the Digital Zoom
This feature controls the digital zoom mode of your camera.
Your camera enlarges an image using the optical zoom first.
When the zoom scale exceeds 3x, the camera uses digital
zoom.
To set Digital Zoom
1. From the Record menu, select Digital Zoom.
2. Use the
or
keys to go through the selection.
3. Press the SET button to save and apply changes.
The table below shows the available Digital Zoom settings.
Icon
Item
Description
Intelligent Zoom
Enlarges the image digitally with almost no distortion. This feature is
available for still images only.
Standard Zoom
Enlarges all image sizes up to a maximum of 5x in preview, but the image
quality deteriorates.
Off
Uses the optical zoom only.
• Digital Zoom is not available in Face tracking on, Movie, and Voice Recording
modes.
• The maximum Intellect zoom scale varies depending on the image type and
resolution.
37
Setting the Date Stamp
The date of recording can be printed directly on the still
images. This function must be activated before the image is
captured. Once date and time are stamped on an image, they
can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows:
• Available for still images only.
• May slow down AEB/ Burst mode when Date Stamp is
enabled in AEB/ Burst mode.
• In vertical or rotated images, the date and time on your
images still appear horizontally.
To set Date Stamp
1. From the Record menu, select Date Stamp.
2. Use the
or
keys to go through the selection.
3. Press the SET button to save and apply changes.
Setting Auto Review
The Auto Review function lets you view the captured image
right after shooting it.
If Auto review is On, the camera will display the captured
image for 1 second on the LCD monitor.
To set Auto Review
1. From the Record menu, select Auto Review.
or
keys to go through the selection.
2. Use the
3. Press the SET button to save and apply changes.
Recording Videos
You can record videos with the camera, the available
recording time depends on the capacity of the memory card.
Videos can be recorded until the maximum memory capacity
has been reached. However the length of a single video may
be limited (the limitation depends on the camera model).
1.
2.
3.
4.
5.
6.
7.
Slide the Mode switch to Movie mode.
Focus your camera on the subject that you want to take.
Press the Shutter button to start recording.
Use the Zoom dial to zoom in and zoom out an image.
To pause recording, press the key
.
To continue recording, press the key
again.
To stop recording, press the Shutter button.
• When the camera stop recording due to reaching maximum capacity (4GB) for a
single video, simply press the Shutter button again to continue recording.
• The camera will automatically stop recording when the memory capacity is full.
• Digital zoom is not available while recording a video.
• Sound cannot be recorded while using zooms (Spinning the Zoom dial.)
• Power save is not available in video recording or pause recording.
38
Settings of Recording Videos
Press Function button
to enable video setting menu before recording a video.
Movie Size
The Movie Size function appears only in Movie mode. Use this
function to adjust the resolution and quality of movie clips.
The table below shows the available size and corresponding image quality settings.
Icon
Item
Description
HDTV_Only support SDHC_Class(6)
1280 X 720
The length of a single video recording is up to 29 minutes. It will
automatically stop recording if time is over.
640 X 480
High Quality
320 X 240
Normal
Web
For Internet, see "Internet Mode" on page 39 below.
Internet Mode
The Internet Mode allows you to record videos with predefined video settings for easy upload to the
Internet website.
The Internet supports two file upload standards:
• Single File Uploader. The maximum video file size is up to 100 MB.
• Internet Uploader. The maximum video file size is up to 1 GB.
Most uploaded video length ranges within 5 minutes.
Therefore when you record using the YouTube mode, the following standards are followed:
• Recorded videos are set to Internet standard resolution of 640 X 480.
• Recording automatically stops when the file reaches 100 MB.
• To record a YouTube video, select from the Video Size function. Available recording time for a
YouTube video is up to 10 minutes.
White Balance, Metering, Color Mode
To set above settings, please refer to "Using the Function Menu" on page 21.
39
Pre-Record
You can catch the first three seconds of action you would have
potentially missed. Once enable this function, the camera starts
recording video automatically before pressing Shutter button.
As soon as the Shutter button is hit, the most recent three
seconds of video is added to the beginning of the clip.
Display the icon in red while turning Pre-Record on.
Pre-Record will be canceled in the following situation:
• After recording starts.
• Switch to Photo mode or Playback mode.
• Any kind of menu is turned on.
• Turn the unit off.
• Enter USB mode.
Playback
You can playback the still images, video and audio clips on the LCD monitor.
Viewing in Single Navigation
The Single navigation mode displays the image one by one on the LCD monitor. To view
images/videos/audio clips, follow the steps below.
.
1. Slide the Mode switch to Playback mode
2. The LCD monitor displays an image. To understand the icons and other information on the screen,
please see "Photo Mode Screen Layout" on page 13.
Still Image
Video
Audio Clip
3. Use the
or
keys to view next/previous image/video/audio.
4. To play a video or audio clip, press the SET button. See "Playing Videos" on page 42 and "Playing
Voice Recording" on page 43 for more details.
40
Viewing Thumbnails
This function allows you to view 9-thumbnail images or by calendar mode on the LCD monitor at the same
time. Searching numerous of images is much easier then single view navigation.
To set 9-images mode
1.
2.
3.
4.
Set the camera to Playback mode
.
Spin the Zoom dial counterclockwise (left) once to enter 9-images mode.
Use the navigation controls to move through the items.
Press the SET button to select the image and view it normally.
Scroll bar.
If scroll bars appear, it indicates that the screen can be scrolled.
Thumbnail view
To set calendar mode
1. Set the camera to Playback mode
.
2. Spin the Zoom dial counterclockwise (left) twice to view
thumbnails in calendar mode.
3. Use the navigation controls to move through the items.
4. Press the SET button to select a image and view it
normally.
In calendar mode:
• The first file (Including image, video, audio and error file) recorded on each date
appears on the screen.
• Spin the Zoom dial clockwise (right) would back to 9-images mode.
Thumbnail icons:
When you view the thumbnails, some images may contain icons. These icons indicate the type of file or
recording.
Icon
Item
Description
Voice Record
Indicates a voice recording file.
File Error
Indicates an error file.
41
Zooming images
The zoom view function works with still images only.
• In normal view, spin the Zoom dial clockwise (right)
repeatedly until the desired zoom view.
• The 4 arrows on the LCD monitor indicate that the
image is zoomed in.
• You can zoom to view an image of up to 12X.
• Use the navigation controls to view the zoomed
image.
• Press the Menu button to close zoom view.
For 320 x 240 resolution images, you can only zoom in up to 6X.
Playing Videos
1. Set the camera to Playback mode
.
2. Use the navigation controls to scroll through the saved
images. A video clip has a video icon displayed on screen.
3. Press the key the SET button to play the video.
or
keys to
4. During playback, press and hold the
fast forward or rewind the video. The camera supports
forward and rewind speed of up to 4x.
5. During playback, use the Zoom dial to control volume.
Spin clockwise (right) to increase volume/Spin
counterclockwise (left) to decrease volume.
key to pause playback. Press the key
6. Press the
again to resume. When paused, the play info will remain
on screen except
.
7. To forward or rewind the video frame by frame, press the
to pause playback, then press the
or
key
keys.
8. Press the
key to stop the playback. The LCD monitor
displays the video frame image in Single navigation mode.
• The play info, except the icon
, will be displayed when the video is paused,
during REW/FF or frame by frame modes
• Volume cannot be adjusted when paused or during REW/FF modes.
To capture screenshot image from a video clip
1. During playback of video, press the key
to pause
playback on your desired video frame to capture.
2. Press the Shutter button to capture a screenshot.
3. The camera will automatically stop playback. The LCD
screen displays the captured image in Single navigation
mode.
This feature does not function when the memory card is full or the folder cannot be
does not appear on the screen either.
created. The icon
42
Playing Voice Recording
1. Set the camera to Playback mode
.
2. Use the navigation controls to scroll through the saved
images. When viewing a voice recording file, the LCD
monitor displays the screen layout of Audio clips. See
picture on the right.
3. Press the SET button to play the voice recording.
4. During playback, use the Zoom dial to control volume.
Spin clockwise (right) to increase volume/Spin
counterclockwise (left) to decrease volume.
key to pause playback. Press the
key
5. Press the
again to resume. When paused, the play info will remain
.
on screen except
6. Press the
key to stop the playback. The LCD monitor
displays the image in Single navigation mode.
Volume cannot be adjusted during Pause mode.
Playing Voice Memo
Voice memo is separately recorded and attached to a captured image. See "Voice Memo" on page 48 on
how to record voice memo.
.
1. Set the camera to Playback mode
2. Use the navigation controls to scroll through the saved
images. An image file with voice memo has a voice memo
icon located on the top center of the LCD monitor. See
picture on the right.
3. Press the SET button to play the voice recording.
4. During playback, use the Zoom dial to control volume.
Spin clockwise (right) to increase volume/Spin
counterclockwise (left) to decrease volume
5. Press the key
to pause playback. Press the key
again to resume. When paused, the play info will remain
on screen except
.
6. Press the key
to stop the playback. The LCD monitor
displays the image in Single navigation mode.
Volume cannot be adjusted when you pause the voice memo.
43
Deleting an Image/Video/Audio
There are two ways to delete an image/video/audio:
• Using the Delete button, or
• Using Playback Menu Delete settings. See "Delete" on page 45.
Using the Delete Button
Use the Fn/Delete button on your camera to delete or mark an image/video/audio clip for
deletion.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Set the camera to Playback mode
.
View images/videos/audio clips in Single navigation mode.
or
keys to scroll the display.
Use the
When the desired image/video/audio clip is displayed on
the LCD monitor, press the Fn/Delete button.
A confirmation selection appears on screen.
Select Delete.
Press the SET button to delete.
The next image is displayed on the LCD monitor. To delete
another file, use the
or
keys to scroll through the
images/videos/audio clips. Then, repeat steps 5 to 7.
To close the Delete function and go back to the single
navigation mode, select Cancel.
Locked files cannot be deleted at any time. When you try to delete a locked file, the
camera displays "File Locked" message on the LCD monitor.
Playback Menu
The Playback menu allows you to edit images, record voice memo, and setup playback settings.
To go to Playback Menu:
1. Slide the mode switch to Playback mode
.
to launch the Playback Menu.
2. Press Menu button
or
keys to move through the menu
3. Use the
selections.
or the SET button.
4. To select a menu, press
5. Change the submenu settings using the 4-way navigation
control.
6. Press the SET button to save and apply settings.
Slideshow
The slideshow function enables you to playback your still images automatically in order one image at a
time.
To view slideshow:
1.
2.
3.
4.
5.
From the Playback menu, select Slideshow. The Slideshow menu appears.
Set the slideshow settings.
Select Start, then press the SET button to start the slideshow.
During slideshow, press the SET button to pause slideshow.
or
keys t to move through the options. Select whether to Continue or Exit the
Use the
slideshow.
6. Press the SET button to apply selected option.
44
To change slideshow settings:
1. From the Slideshow menu, use the
or
keys t to
move through the selections.
2. Select Interval setting. Press the
or
keys to adjust.
Choose among the available interval settings: 1 sec., 3
sec., 5 sec., and 10 sec.
or
keys to
3. Select Transition setting. Press the
adjust. Choose among the available transition settings:
.
4. Select Repeat setting. Press the
Available settings are: Yes, No.
or
keys to adjust.
Delete
The Delete function allows to remove unwanted files in the internal memory or on the memory card.
Protected files cannot be erased, to delete, unprotect the file first. See "Protect" on page 46.
To delete a image/video/audio clip:
1. From the Playback menu, select Delete.
2. The Delete submenu is displayed on the LCD monitor.
Available select settings:
• Single. Select one file to delete.
• Voice Only. Delete only the attached voice memo,
not voice clips. The image is still retained in the
memory.
• Multi. Select multiple files to delete at the same
time.
• All. Delete all files.
To delete a single file:
1. Select Single in the Delete submenu, the images are
displayed on the LCD monitor in single navigation mode.
or
keys to scroll the display.
2. Use the
3. When the desired image/video/audio clip is displayed on
the LCD monitor, select Delete.
4. Press the SET button to delete.
5. The next image is displayed on the LCD monitor. To delete
another file, use the
or
keys to scroll through the
images/videos/audio clips. Repeat steps 3 to 4.
6. To close the Delete function and go back Playback menu,
select Cancel.
To delete attached voice memo:
1. Set the camera to Playback mode
.
2. View images/videos/audio clips in Single navigation mode.
or
keys to scroll until the desired image
3. Use the
with voice memo is displayed on the screen.
4. Press Menu button
to launch the Playback Menu.
or
keys to move through the Playback
5. Use the
menu selections then select Delete.
6. From the Delete submenu, select Voice Only.
7. A confirmation selection appears, select Yes.
8. Press the SET button to delete the attached voice memo
and go back to Playback mode.
The Voice Only submenu is disabled if the current image displayed, at the time you
access the Delete menu, does not have any attached voice memo.
45
To delete multiple files:
1. Select Multi in the Delete submenu, the images are
displayed in thumbnail view on the LCD monitor.
2. Use the navigation control to move through the files.
3. When the desired image/video/audio clip is highlighted,
press the SET button to mark image/video/audio clip for
deletion.
4. Repeat step 3 until all desired images for deletion are
marked.
5. Press the MENU button. A confirmation selection appears.
6. Select Yes to confirm.
7. Press the SET button to delete marked files.
To delete all files:
1. Select All in the Delete submenu. A confirmation message
appears.
2. Select Yes.
3. Press the SET button to delete all files.
Protect
Set the data to read-only to prevent images from being erased by mistake.
A protected file has a lock icon
when viewed on Playback mode.
To protect files:
1. From the Playback menu, select Protect.
2. The Protect submenu is displayed on the LCD monitor.
Available select settings:
• Single. Select one file to lock/unlock.
• Multi. Select multiple files from the thumbnail view to
lock/unlock
• Lock All. Lock all files
• Unlock All. Unlock all files.
46
To protect/unprotect a single file:
1. Select Single in the Protect submenu, the images are
displayed on the LCD monitor in single navigation mode.
or
keys to scroll the display.
2. Use
3. When the desired file is displayed on the LCD monitor,
Press the SET button to select Lock/Unlock.
4. To close the protect/unprotect function and go back
Playback menu, select Exit.
To protect/unprotect multiple files:
1. Select Multi in the Protect submenu, the images are
displayed in thumbnail view on the LCD monitor.
2. Use the navigation control to move through the files.
3. When the desired file is highlighted, press the SET button
to mark/unmark the file clip for protection.
4. Repeat step 3 until all desired files to protect are marked.
5. Press the MENU button. A confirmation selection appears.
6. Select Yes.
7. Press the SET button to lock files and go back to Playback
mode.
To protect all files:
1. Select Lock all in the Protect submenu. A confirmation
message appears.
2. Select Yes.
3. Press the SET button to lock all files.
To unlock all files:
1. Select Unlock all in the Protect submenu. A confirmation
message appears.
2. Select Yes.
3. Press the SET button to unlock all protected files.
47
Red-eye Correction
The Red-eye Correction function is used to reduce red eye in captured images. This function is only
available for still images. Red-eye correction can be applied to an image several times, but the quality may
gradually deteriorate.
To activate Red-eye Correction:
1.
2.
3.
4.
5.
6.
7.
Set the camera to Playback mode
.
or
keys to scroll and select an image.
Press the
Press the MENU button to launch the Playback menu.
Select Red-eye Correction.
Select Start.
Press the SET button to start correction.
After completing Red-eye correction, a menu selection
appears. Select whether to:
• Overwrite. Save and replace old file with a new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel red-eye correction.
8. Press the SET button to save/cancel changes.
Voice Memo
A maximum of 30 seconds of audio can be recorded as a memo for captured still images.
To record voice memo:
1.
2.
3.
4.
5.
6.
Set the camera to Playback mode
.
Press the
or
keys to scroll and select an image to attach voice memo to.
Press the MENU button to launch the Playback menu.
Select Voice Memo.
Select Start, then press the SET button to start recording.
Press the SET button again to stop recording.
Time left (n seconds) for recording.
When you record voice memo to an image with an existing voice memo, the old
recording file would be replaced by the new one.
48
Color Mode
The Color Mode function lets you adjust edit still images to apply different colors or tones for a more artistic
effect. Edited images in this function are saved as a new file.
To activate Color Mode:
1.
2.
3.
4.
Set the camera to Playback mode
.
Press the
or
keys to scroll and select an image to edit.
Press the MENU button to launch the Playback menu.
Select Color Mode. The Color mode submenu appears.
5. Press the
or
keys to scroll and select an option. As you move through the selection, the
preview on the LCD monitor changes synchronously.
The succeeding table shows the available settings.
Icon
Item
Description
Normal
No effect is added to the image.
Sepia
Image is saved with a sepia tone.
B&W
Image is saved in black and white.
Negative
Image appears to be the opposite of the original image.
Mosaic
Image is saved with mosaic tiles.
Vivid Red
Image is saved with reddish tint.
Vivid Green
Image is saved with greenish tint.
Vivid Blue
Image is saved with bluish tint.
49
Trim
The Trim function allows you to trim an image to another image size. This function is only available for still
images.
To trim an image:
1. Set the camera to Playback mode
.
or
keys to scroll and select an image to
2. Use the
trim.
3. Press the MENU button to launch the Playback menu.
4. Select Trim. The Trim screen layout is displayed on the
LCD monitor.
5. Use the Zoom dial to change size as zoom in/out.
No
Description
1
Enlarged image
2
4-way indicator
3
Trimmed size
4
The approx. location of the trimmed area
5
Image area
6. Use the navigation controls to move the image.
7. Press the SET button to apply changes. A menu selection appears.
8. Select whether to:
• Overwrite. Save and replace the old file with the new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel Trim.
9. Press the SET button to save/cancel changes.
• Trim function is not available for images with image size set to VGA.
• All images will be trimmed in 4:3 ratio regardless of its original image ratio.
50
Resize
Resizes a previously saved image and only resizing to a smaller size is available.
To resize an image:
1. Set the camera to Playback mode
.
2. Use the
or
keys to scroll and select an image to
resize.
3. Press the MENU button to launch the Playback menu.
4. Select Resize. The Resize submenu is displayed on the
LCD monitor.
5. Select size among: 8M, 5M, 3M, and VGA. Available size
settings may vary depending on original image size.
Unavailable settings appear as gray icons in Resize
submenu.
6. After selecting size, a menu selection appears. Select
whether to:
• Overwrite. Save and replace old file with a new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel resize.
7. Press the SET button to save/cancel changes.
Resize function is not available for images with image size set to VGA.
Startup Image
You can specify the startup image from the captured images for camera.
1. Press the MENU button to launch the Playback menu.
2. Select Startup Image. The menu selection appears.
3. Select options:
• System. Use camera default image.
or
keys to scroll and select
• My Photo. Use the
desired image.
• Off. Disable the startup image.
4. Press the SET button to apply changes.
The startup image will still be displayed startup even if the selected image was
deleted.
51
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on
your memory card. You can select the images to be printed and how many prints to make with the DPOF
menu in the camera and insert the memory card to the card compatible printer. When the printer starts
printing, it will read the embedded information on the memory card and print the specified images.
To set DPOF:
1. Press the MENU button to launch the Playback menu.
2. Select DPOF. The submenu appears. Available settings
are as follows:
• Single. Select a single image to mark.
• All. Mark all images in the memory card.
• Reset. Reset all DPOF settings to initial default
settings.
To set DPOF on a single image/all images:
1. Select Single or All on the DPOF submenu.
2. For single image, use the
or
keys to scroll and
select an image to mark for printing.
3. Specify the number of copies. Use the
or
to
increase/decrease number.
4. Press the FUNC button to toggle between turning on/ off
the date stamp.
5. Press the SET button to save DPOF settings.
To reset DPOF:
1. Select Reset on the DPOF submenu. A confirmation
message appears.
2. Select Yes.
3. Press the SET button to reset DPOF settings.
Radial Blur
The Radial Blur is an effect creates blurs around a point.
To set Radial blur for an image:
1. Use the
or
keys to specify the level of blurs.
The adjusting result on preview synchronously while
selecting the level.
2. Press the SET button to proceed save options.
3. Available settings are as follow:
• Overwrite. Save and replace the old file with a
new one.
• Save As. Save the new file as a new one.
• Cancel. Cancel Radial blur.
52
Using the Setup Menu
You can access the Setup menu whether you are in Record or Playback mode.
The Setup menu allows to configure general camera settings.
To go to Setup Menu:
1. Press Menu button
to launch the Record/Playback
Menu.
2. Use the
or
keys to switch the menu tab to Setup
menu.
3. Use the
or
keys to move through the menu
selections.
4. To select an item, press the SET button or
key.
5. Change the submenu settings using the 4-way navigation
control.
6. Press the SET button to save and apply settings.
Setting Sounds
Use the Sound menu functions to control the sounds produced by the camera.
1. From the Setup menu, select Sounds.
2. Adjusts sound settings.
3. Press the SET button to apply changes.
Item
Available Settings
Description
Startup
Sound 1, Sound 2,
Sound 3, Off
Selects the startup sound when camera is turned on.
Shutter
On, Off
Enables or disables shutter sound when Shutter button is
pressed. Shutter sound is not available when recording videos
or voice clips.
Beep
volume
0-4
Adjusts volume.
Setting Power Save
The Power Save function allows you to set an idle time after
which the camera automatically sets to sleep mode to save
power. After a minute of being in sleep mode, the camera
eventually turns off power.
This
•
•
•
function is not available in the following instances:
Recording a video or audio file
Playing a slideshow/video/audio file
Using the USB connector
53
Setting LCD Save
Enable the LCD Save function to automatically decrease the LCD
brightness to conserve battery power. When the camera is idle
for 20 seconds, the LCD darkens. Press any button to resume to
normal brightness.
•
The camera is idle when no buttons are pressed. LCD
Save, though enabled, does not function during video
playback, slideshow and video recording.
Setting Date & Time
Use the Date & Time function to set the date and time of your camera. This function is useful in attaching
date stamps on captured images. Your camera uses a 12-hour time format.
1. Press the navigation controls to adjust date and time
value. By holding down the
or
keys, the numeric
values changes continuously.
2. Press the SET button to apply changes.
Setting Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1. Use the navigation control to scroll through the list and
select the desired language.
2. Press the SET button to confirm and apply settings.
Setting File Numbering
This function allows you to select the method in which to assign file numbers to images.
Available settings are:
• Series. Assigns number to files in sequence even if the
folder is changed.
• Reset. The file numbering will start from 0001 each time
the folder is changed and "Format" is processed.
To understand folder and file structure of your camera, see
"About Folder and File Names" on page 60.
54
Setting TV Out
Use the TV Out function to adjust video output signal to accommodate different regional settings. If TV out
is not set correctly, the image may not display properly on TV.
Available settings are:
• NTSC. Applicable in Japan, USA, Canada, Taiwan and
others.
• PAL. Applicable in Europe, Asia (excluding Taiwan),
Oceania and others.
Setting LCD Brightness
Select a brightness level for the LCD monitor.
Available settings are:
• Auto. Auto detects the LCD brightness.
• Bright. Enhance the LCD brightness.
• Normal. Normal LCD brightness.
Setting Memory Kit
This utility formats the internal memory (or memory card) and erases all stored images and data.
Available settings are:
• Format. Select to format currently used memory.
• Copy to Card. Select to copy all files stored in the internal
memory to the memory card.
• If the images were saved in the internal memory when inserting memory card
into the camera. You can use Copy to Card function in order to copy all images
from the internal memory into memory card.
• If there is a memory card inserted in the memory slot, the camera automatically
saves all files to the memory card.
• If there is no memory card or the internal memory is empty, the Copy to Card
function is disabled.
55
Reset All
Use this function to reset the camera to its factory settings.
However, the following settings are exceptions and not affected
by Reset.
• Date & Time
• Language
• TV Out
• Custom White Balance data
Making Connections
You can connect your camera to: TV, computer, or a printer.
Connecting the Camera to a TV
You can play back your images on a TV screen. Before connecting to any video devices, make sure to
select NTSC/PAL to match the broadcast standard of the video equipment you are going to connect to the
camera.
To connect your camera to a TV:
1. Turn on the camera.
2. Set the TV out to match the TV’s video out format. See
"Setting TV Out" on page 55.
3. Connect the USB/AV 3-in-1 cable to the USB port on the
bottom of your camera.
4. Connect the other end of the cable to the TV’s AV input port.
5. The LCD monitor turns black and all images and video clips
are displayed on the TV.
Connecting the Camera to a PC
You can transfer images, videos and audio files to your PC.
1. Connect one end of the USB cable to an available USB port
on your computer
2. Connect the other end of the USB cable to the USB
terminal on the camera.
3. Turn on the camera.
56
4. The USB mode menu appears on the screen. Select
Computer by using the
or
key and press the SET
button.
5. The PC starts to detect the connection while the LCD
monitor appears Connecting…
6. Connection established after PC MODE appeared on the
LCD monitor
7. Access the files in the camera by your PC.
• The camera’s internal memory and memory card would display as removable drives
in PC.
• After the connection, no image is displayed on the LCD monitor.
57
Connecting the Camera to a Printer
You can print your images directly using a PictBridge compatible printer.
1. Turn on your Printer. Check that the printer is turned on,
there is paper in the printer, and there are no printer error
messages.
2. Connect one end of the USB cable to the printer while the
other end to USB terminal on the camera.
3. The USB mode menu appears on the screen. Select
Printer by using the
or
key and press the SET
button.
4. Enter the print mode and print the selected images.
For details on the following page "Setting the Print Mode
Menu".
Setting the Print Mode Menu
Print Mode menu appears on the screen after the connection between a printer and your camera is
established.
Print Mode includes three major settings:
• Print Select. An image can then be selected to print.
• Print All. Prints all images.
• Print Index. Prints all images as thumbnails.
To set Print Select
1. Use the
or
keys to scroll and select an image for
printing.
2. Specify the number of copies. Use the
or
key to
increase/decrease number.
3. Press the FUNC button to toggle between turning on/ off
the date stamp.
4. Press the SET button to enter printer settings.
To set Print All and Print Index
Repeat the same steps 2 to 4, then enter printer settings.
58
To set Printer Settings
1. Use the
or
key to specify a print option.
or
keys.
2. Modify paper size and quality by the
Available setting:
• Paper size: Default / A4 / 4"x6"
• Quality: Default / Fine / Normal
3. Select Print on the screen for printing.
Or Cancel to go back Print Mode.
Start Printing
• LCD monitor appears "Now printing…".
• Or press Menu button
to stop printing anytime.
59
Appendix
About Folder and File Names
Your camera automatically creates specific directory of folder in the internal memory cards to organize
captured images, videos and audio files.
File Naming
File names begin with "DSCI" and followed by a 4-digit number that increases in sequence. File numbering
starts from 0001 when a new folder is created.
If the highest folder number is 999 and the highest file number exceeds 9999, the camera will display the
warning message "Folder cannot be created". When this happens, try one of the following ways:
• Reset the file number. See "Setting File Numbering" on page 54
• Plug in a new memory card.
Do not change the folder and file names in the memory card using your PC. It may be unable
to playback the data using the camera.
Troubleshooting
Problem
Cause and/or Action
Camera does not turn on.
The batteries may be exhausted. Charge or replace the batteries.
Camera turns off
automatically.
Press Power button to turn on the camera.
LCD turns blank.
Press any button except the Power button to turn on the LCD.
Empty battery icon is
displayed on the LCD, then
the camera turns off.
Batteries are exhausted, please replace or recharge.
LCD monitor displays
‘No image’.
There is no image file in the memory card. Image file format may not be
supported.
LCD monitor displays
‘Not available for this file’.
Function is only available for specific file types. File format is not
supported.
LCD monitor displays
‘Memory full’.
Memory card is full. Replace the memory card with a new one or delete
unnecessary images.
LCD monitor displays
‘File locked’.
This file is locked. Unlock the file. See "Protect" on page 46.
LCD monitor displays
‘Card locked’.
The memory card is protected. Remove the card and slide the
write-protect switch to its unlock position.
LCD monitor displays
‘Format error’.
The card may be damaged. You can either change the card or wipe to
clean the connected points.
LCD monitor displays
‘Copy error’.
The memory card is protected. Remove the card and slide the
write-protect switch to its unlock position.
The memory card is full. Replace card or delete unnecessary files.
No image displays on the
TV screen.
Incorrect TV-out type was selected. Set the correct TV-out type to match
your TV system.
The lens got stuck up.
Do not force the lens to go back.
The type of the battery used may be incorrect or the battery power level
is too low. Change the battery or charge the battery before using the
camera.
60
Specifications
Sensor
Lens
LCD monitor
SONY 14M 1/2.3-type
Lens Focal Length: 6.3 (W) ~ 18.9 (T) mm
3X optical zoom, 5x digital zoom
3.0" Color LCD
Normal:
Wide: 10cm~infinity
Tele: 60cm~infinity
Focusing Range
Macro:
Wide: 10cm ~ 100cm
Tele: 60cm ~ 100cm
Aperture
Shutter
File Format
2.9 ~ 5.4
Type: Mechanical and Electronic
Shutter Speed:
Auto: 1 - 1/2,000 sec.
Manual: 15 - 1/2,000 sec.
Night: 15 - 1/2,000 sec.
Fireworks: 2 sec.
Still Image: EXIF 2.2 compatible format (JPEG compression)
Video: AVI (MJPEG)
Audio: WAV
Resolution (Photo)
14M (4320 x 3240), 3:2 (4320 x 2880), 8M (3264 x 2448), 5M (2592 x 1944),
3M (2048 x 1536), 16:9 (1920 x 1080), VGA (640 x 480)
Resolution (Movie)
Θ
Θ
Θ
Θ
Scene Mode
1280 x 720 (16:9)_Only support SDHC_Class(6)
640 x 480
320 x 240
640 x 480 (Web)
Auto, Program, Intelligent Scene, Portrait, Landscape, Sunset, Backlight, Kids,
Night Scene, Fireworks, Snow, Sports, Party, Candlelight, Night Portrait, Soft
Skin, Flowing Water, Food, Building, Text, Foliage, Auction, Smile Capture, Blink
Detection, Pre-Composition, Love Portrait, Self Portrait, HDR, Aperture Priority,
Shutter Priority, Manual Exposure, Voice Recording
ISO Equivalent
Auto, ISO 100, 200, 400, 800, 1600, 3200 (3M/16:9<1920 x 1080>/VGA),
6400 (3M/16:9<1920 x 1080>/VGA)
White Balance
Auto White Balance, Daylight, Cloudy, Tungsten, Fluorescent 1, Fluorescent 2,
Custom
Exposure Control
+2.0EV / +1.7EV / +1.3EV / +1.0EV / +0.7EV / +0.3EV / 0EV / -0.3EV / -0.7EV/
-1.0EV / -1.3EV / -1.7EV / -2.0EV
Metering
Driver Mode
Multi, Center, Spot
10 sec., 2 sec., Double, Burst, Speed Burst, Off
Flash
Auto, Red-eye Reduction, Forced On, Slow Sync, Forced Off
Color Mode (Preview)
Normal, Vivid, Sepia, B&W, Vivid Red, Vivid Green, Vivid Blue
Color Mode
Storage
Normal, Sepia, B&W, Negative, Mosaic, Vivid Red, Vivid Green, Vivid Blue
Internal memory: 64MB flash memory
External memory: SD (up to 4GB), SDHC card (up to 32GB guaranteed)
61
OSD Language
English / French / Spanish / German / Italian / Russian / Portuguese / Brazil
Portuguese / Dutch / Turkish / Polish / Hungarian / Romanian / Czech /
Bulgarian / Croatian / Slovak / Slovenian / Greek / Swedish / Norwegian /
Finnish / Danish / Arabic / Indonesia / Malay / Thai / Japanese / Korean /
S. Chinese / T. Chinese
Interface
USB/AV OUT
TV system
NTSC/PAL (selected by Setup MENU)
Battery
Operating Temperature
Operating Humidity
Lithium ion battery
0º C - 40º C
0% - 90%
Microphone
Built-in
Speaker
Built-in
Dimensions
90 x 56.8 x 18.8
Weight
105g (no battery)
62
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement