Philips 639 Operating instructions

Philips 639 Operating instructions
Discover your phone
b key
Screen
Camera* and
m key
Pick up and
Wap (key
Side keys
How to...
Switch phone On/Off
Press and hold ).
Enter PIN code
Enter your PIN code using
the keypad and press ,
or # to confirm.
Make a call
Enter the phone number on
the keypad and press (
to dial.
Answer a call
Press ( when
phone rings.
Set conversation
volume
Press the side key up or
down during the call.
Change the ringer
Long press b when in idle
mode to access the ringers
list.
Change the ringer
volume
Press the side key up or
down when in idle mode.
End a call
Press ).
Access the main menu
Press , in idle mode.
Access the Phonebook
Press - in idle mode.
Navigation
and,key
Hang up and
on/off) key
c key
Microphone
Keypad
* Optional, the camera is an accessory, not included in the
standard package and sold separately.
Philips continuously strives to improve its products.
Therefore, Philips reserves the rights to revise this user
guide or withdraw it at any time without prior notice.
Philips provides this user guide «as is» and does not
accept, except as required by applicable law, liability
for any error, omission or discrepancy between this
user guide and the product described.
your
Use the Phonebook
Browse the list by moving
+or - and press
( to call the selected
name.
Access BeDJ
Press b in idle mode.
Access the Call list
Press + or
mode.
Go to previous menu
Press c.
Quickly return to idle
when browsing menus
Press and hold c.
Change the
language used
Press and hold 0, move
+ or - to select the
language and press ,.
( in idle
Activate the Mirror FX
screen
Long press the side key
(volume down).
The phone must be closed
and in idle mode.
Launch
the zoo animation
When the feature is set to
On, long press the side key
(volume up)
The phone must be closed
and in idle mode.
Access a function
in the menu
Press ,, move <
or > to select a function,
then press , to enter the
sub-menu. Repeat to reach
the desired function.
Activate a programmed
Voice command
Press and hold the
key.
Launch WAP
Press and hold (.
,
Events
Some events may modify the idle screen (missed call,
new message, etc.). Press , to access the
corresponding menu or long press c to go back to
the idle screen.
The carousel
A carousel is a circular loop of icons displayed on the
screen. Each icon represents a feature or operation of
your phone.
All icons don’t fit within the screen; the hidden ones
appear when scrolling < or >.
You access the main carousel by pressing , when
in idle mode. Move < (anti clockwise) or >
(clockwise) and press , when the feature or option
of your choice is selected, or c to cancel. Another
sub-carousel or list will then appear.
Pressing + or - will alternate between two options, such as Activate/Deactivate, On/Off, Increase/
Decrease a value, etc.
Browse carousels and lists until you reach the desired
feature or option. When navigating in a list, a scroll
bar located on the right hand side of the screen shows
your actual position in the list. With the navigation
key, you can then select or adjust all the functions of
your phone as described in the relevant chapter of this
user guide.
Table of contents
1. Getting started ............................................1
2.
Insert the SIM card ...........................................1
Switch on the phone ........................................2
Set date and time ..............................................2
Copy of the SIM phonebook ..........................3
First call ...............................................................3
Charge the battery ...........................................3
Main features ................................................5
Access and consult the phonebook ..............5
Make a call ..........................................................5
Answer and end a call ......................................5
Change the ringer .............................................6
Activate the silence mode ..............................6
Activate the vibra alert ....................................6
Mirror FX ...........................................................6
Zoo animation ...................................................6
Read your mobile phone number .................7
Adjust the earpiece volume ............................7
Crazy clock .........................................................7
Mute the microphone ......................................7
Unmute the microphone .................................7
Record a conversation .....................................7
Clear the call list ...............................................8
Clear the SMS list .............................................8
Clear the phonebook ......................................8
Quickly scroll a list ...........................................8
Other features during a call ...........................8
Menu tree .......................................................9
3.
4. Multimedia messaging .......................... 12
5.
Create an MMS .............................................. 12
Select the addressees ................................. 12
Design your message ................................ 12
Access the options ..................................... 13
Send your Message .................................. 14
Receive an MMS ............................................. 15
Download and play an MMS ............... 15
Get and store attachments ...................... 15
Manage folders ............................................... 16
Settings ............................................................. 17
Network account ..................................... 17
Bearer ....................................................... 17
MMS Centre ........................................... 17
Gateway address ...................................... 18
Gateway port ........................................... 18
Application settings ................................. 18
Text or number entry ......................... 20
T9® text imput .............................................. 20
What is it? ............................................... 20
How to use it? .......................................... 20
Basic text input ............................................... 21
i
6. Phonebook .................................................. 22
7.
ii
SIM card phonebook ..................................... 22
Phone’s phonebook ....................................... 23
Add names in the phonebook ..................... 23
In the SIM card ....................................... 23
In the phone ............................................. 23
Add a record in the phone’s phonebook . 24
Own numbers .......................................... 24
Fotocall: see and hear who’s calling ........... 24
Edit and manage names ................................. 25
In the SIM card ....................................... 26
In the phone ............................................. 26
Make calls ......................................................... 27
Emergency number .................................. 27
Other number .......................................... 27
Settings .......................................................... 29
Sounds .............................................................. 29
Silent ........................................................ 29
Ringer volume .......................................... 29
Ringer ....................................................... 29
Messages Ringer ....................................... 29
Equaliser .................................................. 29
Key tones .................................................. 29
Sounds Alerts ........................................... 30
Vibra alert ............................................... 30
Display .............................................................. 30
Screen saver .............................................. 30
Animation ................................................ 31
8.
Backlight .................................................. 31
Wallpaper ................................................ 31
Hotkeys ............................................................ 31
Voice command ............................................. 34
Voice dial ......................................................... 35
Security ............................................................ 35
Public names ........................................... 35
Call barring ............................................. 36
Change codes ........................................... 36
PIN protection ........................................ 37
Network .......................................................... 37
GPRS attach ............................................ 37
Register again .......................................... 37
Preferred list ............................................ 38
Access settings ........................................... 38
Time and date ................................................. 39
Clock display ........................................... 39
Set date .................................................... 39
Date format ............................................. 39
Time zone ................................................ 39
Daylight saving ....................................... 40
Set time .................................................... 40
Language ........................................................... 40
Profiles .............................................................. 40
Messages ....................................................... 42
SMS .................................................................... 42
Send a SMS ............................................. 42
Read SMS ................................................ 43
SMS settings ............................................ 44
SMS Archive ............................................ 45
E-Mail ................................................................ 45
Settings ..................................................... 46
Write and send an e-mail ....................... 48
Receive and read e-mails ........................ 49
Broadcast message ........................................ 53
Instant message .............................................. 54
9. Mix music ..................................................... 55
How to... .......................................................... 55
Get started ...................................................... 55
Activate tracks ......................................... 55
Change track melodies and instruments 56
Change the tempo .................................... 56
Start recording ......................................... 57
Record a mix ................................................... 57
Manage the recording ............................. 57
From existing files ................................... 58
Create your own style and mix .................. 58
From scratch ............................................ 58
Save your own styles ..................................... 58
Receive a call ................................................... 59
10. Multimedia ................................................ 60
Picture album .................................................. 60
Sound album .................................................... 60
Demo mode .................................................... 61
Memory status ................................................ 61
Sound recording ............................................. 62
BeDJ .................................................................. 62
11. Games and appli. .................................. 63
Calculator ........................................................ 63
Alarm clock ..................................................... 63
Organiser ......................................................... 63
Create a new event .................................. 63
Modify an event ...................................... 64
Zoo ................................................................... 65
Crazy clock ..................................................... 66
Euro converter ............................................... 66
Brick Game ..................................................... 67
12. Call information .................................... 68
Call settings ..................................................... 68
Active flip ................................................ 68
Call forward ............................................ 68
Mailboxes ................................................ 69
Auto redial ............................................... 69
Any key answer ........................................ 69
Call waiting ............................................ 69
Caller ID ................................................. 69
Call list .................................................... 70
Reset ......................................................... 70
Call list .............................................................. 70
Call counters .................................................. 70
GSM counters ......................................... 70
GPRS counters ........................................ 71
iii
13. WAP ............................................................. 73
Internet services ............................................. 73
Launch a WAP session ............................ 73
End a WAP session .................................. 73
Homepage ................................................ 73
Bookmarks ............................................... 74
Enter address ............................................ 74
Settings ..................................................... 74
Push inbox ............................................... 76
Homepage ................................................ 77
Back .......................................................... 77
Forward ................................................... 77
Refresh ...................................................... 77
Options ............................................................ 77
Save as homepage .................................... 77
Save as... .................................................. 77
Exit ........................................................... 77
Receive a call ............................................ 78
14. Operator services ............................... 79
GSM strings ..................................................... 79
DTMF tones .................................................... 79
Make a second call ......................................... 80
Answer a second call .................................... 80
Answer a third call ......................................... 81
Conference call ............................................... 81
iv
Explicit call transfer ....................................... 82
15. Taking pictures ...................................... 83
Camera management .................................... 83
How to... .................................................. 83
Plug in the camera .................................. 84
Picture shots ................................................... 84
General principles ................................... 84
Take a picture ......................................... 85
Review the pictures .................................. 86
Receive a call ........................................... 86
Make a call .............................................. 86
Settings ............................................................. 86
Colour mode ............................................ 86
Camera mode .......................................... 87
Sounds ...................................................... 87
Picture resolution .................................... 87
Picture quality ......................................... 87
Self-timer ................................................. 87
Icons & symbols ............................................ 88
Precautions ....................................................... 89
Troubleshooting ........................................... 93
Philips authentic accessories ................. 96
Declaration of conformity ...................... 97
1 • Getting started
2.
Remove the battery by pressing the inner clips
one after the other, then pulling the battery from
the left handside.
3.
Remove the SIM card from its holder and place
it on its slot (be careful that the clipped corner of
the card is in the appropriate corner). Then push
the plastic clip holder, until it stops and
maintains the SIM card.
Read the safety instructions in the “Precautions” section
before use.
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription, your mobile number,
and a memory in which you can store phone numbers
and messages (see “Phonebook” page 22).
Insert the SIM card
1.
Press on the battery clip and slide the battery
cover downwards.
Make sure the phone is switched off before removing
the battery.
Getting started
1
4.
5.
Replace the battery in its slot as shown below:
first place its right side against the right edge of
the phone and press until it clips.
Slide the battery door into its slots, metallic
connectors downwards, until it stops.
Switch on the phone
1.
2.
To switch on the phone, press the ) key.
When you switch on the phone, you may be
prompted to enter the PIN code, which is the 4
to 8-digit secret code of your SIM card to protect
it from unauthorised use. It is preconfigured and
communicated to you by your operator or
retailer. To personalise the PIN code, see
“Change codes” page 36.
If you enter a wrong PIN code 3 times, your SIM card
is blocked. To unblock it, you must request the PUK
code from your operator.
3.
Enter your PIN code. If you make a mistake,
press c. Then confirm by pressing , or
#.
Set date and time
As prompted by the phone at first switch on, set the
date by pressing the appropriate numeric keys (press
c to erase a number), then press , to
validate. Proceed in the same way to set the time.
For complete date and time options, see page 39.
2
Getting started
Copy of the SIM phonebook
If you do not copy the SIM phonebook at very first
switch, you will be able to do it directly from the
phonebook menu (see page 22).
If you had a mobile phone before and are using the
same SIM card, the card might contain all or part of
your current phonebook. The mobile phone detects
this and a message asks you if you want to copy your
SIM phonebook onto the built-in phonebook (see
below). Press c to cancel or , to accept.
Accept the copy
Press , to accept the copy of the SIM phonebook
onto your phone. Once the copy is done, the
phonebook located on your phone is automatically set
as your default phonebook. To switch back to the
SIM phonebook, select Phonebook > Phonebook set. >
Phonebook select > In SIM card.
Refuse the copy
If you press the c key to refuse the download of
your SIM card contents at switch on, the copy isn’t
launched and the phonebooks stay unchanged. The
SIM phonebook is the default and you must select
Phonebook > Phonebook set. > Phonebook select > In
phone to switch phonebooks.
Getting started
Abort the copy
If you change your mind while the copy has already
taken place, press the c key to abort the download
of your SIM card contents.
The copy is aborted and the phonebooks only contain
the records downloaded before cancellation of the
process.
The SIM phonebook is the default and you must
select Phonebook > Phonebook set. > Phonebook select
> In phone to switch phonebooks.
First call
1.
2.
Enter the phone number (if you make a mistake,
press c) and press (.
Once connected, your phone emits 2 beeps. To
end the call, press ) .
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low.
We recommend that you do not remove the battery
when the phone is switched on: you may lose all your
personal settings (see information on battery safety,
page 89).
3
1.
Once the battery and battery cover are clipped
on the phone, plug the charger (supplied with
the phone, in the box) into the right hand socket
at the base of the phone as shown below.
•
•
•
2.
•
4
Plug the transformer unit into a main AC power
socket with easy access. The battery symbol
indicates the state of charge:
During charging the 4 charge indicators change;
Each bar represents around 25% of charge and it
takes around 2.15 hours to fully recharge your
mobile phone.
When all 4 bars are steady the battery is fully
charged and you can disconnect the charger.
When the battery is charged, remove the
connector by pressing the release button on top
of the connector.
Depending on the network and condition of use,
talk time goes up to 4 hours and standby time up
to 400 hours.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn’t damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
3.
If you don’t intend to use your phone for several
days, we recommend you to disconnect the
battery.
You can use the phone while it is on charge. If the
battery is completely flat, the battery icon will only
reappear after 2 or 3 minutes of charging.
Getting started
2 • Main features
Access and consult the phonebook
In idle mode, press -. Depending
on the selected phonebook (in SIM or
Phonebook
in phone), the content that appears on
the screen may vary: see “Phonebook” page 22 for
details on this subject.
To consult the phonebook during a call, press ,,
select View Names List, press , and scroll through
the entries by pressing -or +. Then press c
twice to return to the in-call screen.
Make a call
1.
2.
In idle mode, enter the phone number using the
keypad. To correct an error, press c.
Press ( to dial the number and press ) to
hang up.
For an international call, enter the «+» sign instead of
the usual international prefix by pressing and holding
*. To learn how to make a call from the
phonebook, see “Phonebook” page 22.
Main features
Answer and end a call
When receiving a call, depending on your
subscription and if the caller has permitted this
information to be transmitted, his number may be
displayed. If the number is stored in the selected
phonebook (see page 22), the corresponding name is
displayed instead of the number.
1. To answer the call, press (or open the phone
if it was closed.
2. To reject a call, press ) or long press side key
up or down. If you have activated “Call forward”
(see page 68), the call is diverted to a number or
voice mail.
3. To hang up, press ) or close the phone.
The phone will not ring if in Silence mode (see page 6).
If you have selected Any Key Answer (see page 69), you
can accept a call by pressing any key (except )).
Whether the flip is active or not for incoming call (see
page 68), closing the phone always hangs up an
ongoing communication. A beep indicates the end of
the communication.
5
Mirror FX
Activate the vibra alert
Your phone features an external mirror screen that is
activated when you long press the side key down or
when receiving a call or a new event.
Several items are displayed on this screen, according
to various contexts: events, group icon on incoming
call, funny animations like zoo and crazy clock (see
page 65).
If you want your phone to vibrate when
you receive a call, you can activate the
Vibra alert
vibra alert as follows:
1. Press ,, select Settings > Sounds > Vibra alert
and press ,.
2. Move + or - to select On or Off and
press , to confirm.
When the phone is closed, long press the side key down
to activate the mirror FX screen backlight, which will
go out after a preset duration.
Activating the vibra doesn’t mute the ringer. If you
want to mute it and keep the vibra function on,
activate the Silent mode as described above.
The vibra alert is automatically deactivated when you
plug the charger.
Change the ringer
Long press the b key when in idle mode.
You can also access this function by selecting Settings >
Sounds > Ringers.
Activate the silence mode
If you don’t want your phone to ring
when you receive a call, you can
deactivate the ringer as follows:
Press , and select Settings > Sounds > Silent and
press -until the volume is set to On.
Silent
6
Zoo animation
This feature allows you to set an animation that you
can launch on the mirror FX screen:
1. Press ,, select Games & Appli. > Zoo and press
,.
2. Select On, then the animation of your choice
and press ,.
3. Close your phone, press the side key up and
watch the result on the mirror FX screen.
See page 65 for details on this feature.
Main features
Crazy clock
Adjust the earpiece volume
Proceed as follows if you want a small clock animation
to be automatically displayed at the frequency of your
choice on the mirror FX screen:
1. Press ,, select Games & Appli. > Crazy clock
and press ,.
2. Select On, then an animation and a frequency
and press ,.
3. Close your phone, and wait for the frequency to
be reached to see the result.
See page 66 for details on this feature.
During a call, press side key up or down to increase or
decrease the volume.
Read your mobile phone number
To read your own mobile phone number, press -
To unmute the microphone during a
call, press ,, select Unmute and
confirm by pressing ,. The
microphone is unmuted.
when in idle mode and select Own numbers, then press
,, select Show and press , again. Your phone
number is displayed if present on your SIM card. If
not, select New, then follow the instructions.
If your own number has been stored in the Phonebook,
you can read it during a call. See “Access and consult
the phonebook” page 5.
Main features
Mute the microphone
Mute
You can mute the microphone so that
your caller cannot hear you.
During a call, press ,, select Mute
and confirm by pressing ,.
Unmute the microphone
Unmute
Record a conversation
In most countries, conversation
recording is subject to law regulation.
Record dialogue We advise you to notify the caller if you
intend to record the conversation you have with them
and only record if they agree. You should also keep any
recording private. 1 min. is the maximum recording
time available (see “Sound recording” page 62).
7
To record a conversation during a call:
1. While one or several simultaneous calls are in
progress, press , to access the call context
carousel.
You can also delete all the SMS messages from the SMS
Archive menu. Deleting your SMS list is useful to free
memory space in order to receive new messages.
If you select Mute, then Record dialogue, only the
caller’s voice is recorded.
Clear the phonebook
2.
3.
4.
Select Record dialogue and press ,. Press
c, , or hang up to end the recording.
In all cases, and when hanging up, an edit
window allows you to name the recording.
Press , to save the recording, which is then
available in the menu Multimedia > Sound album.
Clear the call list
Reset
To clear your call list, press , and
select Call Info > Call list > Reset. Press
, twice to reset the call list.
Clear the SMS list
To clear the whole messages list at once, press ,
and select Messages > SMS > Read SMS > Delete all SMS.
Press , twice to reset the SMS list.
8
To clear the content of your phonebook at once, press
, and select Phonebook > Phonebook set. > Delete
all. Press , to reset the phonebook content.
This option only applies to the phonebook in your
phone, NOT to the SIM phonebook.
Quickly scroll a list
When browsing a list (of ringers, events, etc.), press
0 to scroll page per page instead of item by item.
Other features during a call
•
•
•
•
•
•
•
Change the equalizer settings (see page 29),
Add a name to the phonebook (see page 23),
Write and send a message (see page 48),
Read a message (see page 43),
Consult your Call list (see page 70),
Consult your Organiser (see page 63),
Make a second call (see page 80).
Main features
3 • Menu tree
The table below describe the complete menu tree (first
to third levels) of your mobile phone, as well as the
page reference you should refer to for more
information concerning each feature or setting.
Security p35
Public names / Call barring / Change codes /
PIN protection
Network p37
GPRS attach / Register again / Preferred list
/ Access settings
Settings p29
Sounds p29
Silent / Ringer volume / Ringer / Messages
Ringer / Equaliser / Key tones / Sounds
Alerts / Vibra alert
Display p30
Screen saver / Animation / Backlight /
Wallpaper
Hotkeys p31
List of available hotkeys
Voice command p34
List of available voice commands
Time and date p39
Clock display / Set date / Date format / Time
zone / Daylight saving / Set time
Language p40
List of available languages
Profiles p40
Messages p42
SMS p42
Send a SMS / Read SMS / SMS settings /
SMS Archive
Voice dial p35
Menu tree
9
E-Mail p45
For each available mail box
Settings / Open mailbox / Send mail
Broadcast message p53
Reception / Topics / District codes
Sound recording p62
BeDJ p55
Games and appli. p63
Instant message p54
Multimedia messaging p12
Create an MMS / Receive an MMS /
Manage folders / Settings
Multimedia p60
10
Calculator p63
Alarm clock p63
Organiser p63
Picture album p60
List of available pictures
Zoo p65
Sound album p60
List of available sounds
Crazy clock p66
Demo mode p61
Euro converter p66
Menu tree
Brick Game p67
Operator services p79
Call information p68
Service numbers
The numbers available in this menu are
operator and subscription-dependent, please
check with your operator.
Call settings p68
Active flip / Call forward / Mailboxes / Auto
redial / Any key answer / Call waiting / Caller
ID
Call list p70
Call list / Reset
Call counters p70
GSM counters / GPRS counters
WAP p73
Services +
This menu is operator and subscription-dependent, please check with your operator.
Phonebook p22
View names list p22
Phonebook settings p22
Delete all / Phonebook select. / Group
settings / Copy to phone
Menu tree
11
4 • Multimedia
messaging
Your mobile phone allows you to send
and receive MMS (multimedia
MMS
messages), featuring texts, pictures and
sounds, including memos that you have recorded.
A multimedia message can be made of one slide
(including text, sound and image), or of several: in
this case, the message is played in a slide show,
whether you send it to an e-mail address or to another
mobile phone.
Create an MMS
Select the addressees
1.
2.
3.
12
Press m while in idle mode.
Select New MMS and press ,.
Select a name in the list and press , to add it
to your mailing list, OR
Select <New> and enter the phone number or
e-mail address you wish to send your message to.
Then press ,.
You must have selected the phonebook «In phone» to
access an e-mail address. See “Phonebook” page 22 for
information on phonebook selection.
4.
5.
If you wish to send your message to this person
only, select Validate list and press ,.
If you want to send it to several people, select
Insert name, press , to access the phonebook
again and to add new names to the mailing list
(up to 20 names).
Add as many recipients as required, then select
Validate list and press ,.
You can select one of the items and press , to Edit
the e-mail address or phone number, or to Remove it
from the list.
Design your message
1.
2.
On the left hand side of the screen, 5 icons allow
you to add a Picture, add Text, add a Sound, Send
the message or access the Options menu. Move
+ or - to go to the previous or next icon.
Press , to access the Picture Album list, select
a picture and press , to add it to your MMS.
The first window of your message is displayed,
showing the selected picture, which is resized if
needed, in order to fit the screen.
Multimedia messaging
Although the picture preview when creating the MMS
is (W)105 x (H)55 pixels, the maximum size of a
picture you can send is (W)640 x (H)640 pixels.
Warning! The bigger the picture size, the longer it will
take to send it.
A copyright-protected picture cannot be sent. Select
None if you don’t want to insert any picture.
If you quit the MMS menu and haven’t finished
writing your message, it will be automatically saved in
the Draft menu (see below).
3.
Add slide
4.
The Text icon is automatically selected: press
, to access the text editing screen, enter the
text of your message (see “Text or number entry”
page 20 for help).
The Sound icon is then selected: press , to
access the Sound Album list, select a sound and
press , to add it to your MMS.
Sounds can be one of the files available in the Album,
or a sound memo that you record when creating the
MMS: in this case, select <Records>, then <New> and
follow the procedure that appears on the screen. You
cannot attach an existing voice memo.
The icon of the item you have added (picture or sound)
changes colour to indicate its insertion.
5.
Press , to send your message, or move
to access the options.
Multimedia messaging
-
Access the options
Move - to go to the Options icon and press ,.
The following options are available:
To create a new slide and add it to
your slide show.
You can also press > when the last
page of the message you are currently
designing is selected.
Once you have created several pages,
move < or > to browse slides.
Delete slide To delete the selected page.
This option is only available if there is
more than one slide in the message.
Next slide
To move to the next or to the previous
Previous slide slide.
13
Slide duration To change the value of slide duration
that you have set in Settings >
Application settings (see page 19), and
to set a delay between each slide.
Save MMS
as draft
To save your message as a draft, that
you can edit, complete and send later
on. MMS saved as drafts are stored in
MMS > Drafts (see “Manage folders”
page 16).
Messages saved as drafts must feature a
subject.
Save as
template
To save your message as a template,
that you can use as a basis for other
MMS (e.g., «Happy birthday» type of
message). MMS saved as templates are
listed in MMS > Templates (see
“Manage folders” below).
Preview MMS To preview the slide show you have
created from the first to the last slide,
including sounds & pictures.
Add subject
14
To edit and change or enter the
subject of your message.
When browsing the lists, specific icons show the type of
the selected message (read MMS, delivery report,
template, etc.). The information about the message
(sender, recipients, subject) scrolls horizontally
automatically when selected.
Send your Message
As described above, you can either:
• Send your message as soon as it is completed:
select Send MMS and press ,.
• Save it as a Draft to complete it and send it later:
to send, select the message in Drafts, select Send
MMS and press ,. Once it has been sent, the
MMS is removed from the drafts list.
If the sending of a draft message fails, the message will
be moved to the Outbox menu, and identified as Not
sent.
Select it from the Outbox menu and send it:
select the message to be sent from this menu,
select Re-send MMS and press ,. Once it has
been sent, the MMS is identified as a sent message in the list.
In the two last cases, select the message to be sent in
the relevant folder. In all cases, select Send MMS and
press ,: a progress bar allows you to follow the
•
Multimedia messaging
sending of your message. Press
sending of your message.
c to cancel the
Receive an MMS
Download and play an MMS
When you receive an MMS, an alert message appears
on the screen to inform you.
1. If you activated the Automatic retrieval mode (see
page 18), the message is automatically
downloaded and placed in the Inbox. Select it in
the Inbox list and press > to play it.
2. If the Manual mode is activated:
• Press c to go back to idle mode and to save
the notification in the Inbox, OR
• Press , to display the details of the notification, then select Download and press , to
download the message itself. As for sending, a
progress bar allows you to follow the download
of the message.
A notification isn’t the MMS itself, but an
information window gathering the details about the
sender’s identity, date and time of reception, subject,
etc. DO NOT DELETE NOTIFICATIONS
BEFORE YOU HAVE RETRIEVED THE
MESSAGE, or you will never be able to do so.
In both automatic and manual modes, a message will
Multimedia messaging
inform you if the size of the MMS you wish to
download is bigger than the memory available in your
phone. In this case, you must free memory by deleting
data (picture, sounds, etc.). See “Memory status”
page 61.
•
3.
If the sender of the message has asked for a Read
report, a prompt will ask you to press , to
send it or to press c to refuse the sending of
the report.
Once the MMS is downloaded, select it in the
Inbox list and press > to play it.
Pressing < or > will switch the player mode
from automatic to manual. In manual mode, press
< or > to display the previous or the next slide.
Get and store attachments
When playing an MMS as described in the previous
section, press , to access the following Player
options:
Play message
To switch back to automatic mode:
the MMS is then played as a
continuous slide show.
15
Next (or
To move to the next or previous slide.
Previous) slide You can also press < or > when
viewing the MMS in manual mode.
Inbox
This item is not available when you
have selected the last (or first) slide.
Rewind
To rewind the MMS back to the first
slide.
Notifications
are
automatically
deleted once you have received the full
MMS. Do NOT delete notifications
before you have retrieved the MMS, or
you will never be able to do so.
Detach picture To detach the picture of the current
slide and save it in the Picture album.
Detach sound To detach the sound of the current
slide and save it in the Sound album.
Manage folders
The MMS menu allows you to manage your messages
in 4 different folders. The default (active) folder is the
last one you selected. To change the active folder,
press c to return to the main MMS menu and
select the folder of your choice, as described below.
16
Lists all the Notifications, Delivery and
Read reports, Read and Unread MMS.
- You
can
Read
or
Delete
notifications and reports.
- You can Play, Forward or Reply to an
MMS, display its Details or Delete
it.
Outbox
Lists the messages you have Sent or
created but Not sent yet (e.g., if you
have cancelled the sending procedure
by pressing the c key).
- You can Open, Delete or view the
Details of all these messages.
- In addition, an MMS not yet sent
can also be Re-sent to someone, and
you can Forward an MMS already
sent.
Multimedia messaging
Templates
Lists all messages saved as templates
after their creation.
You can Play, Edit and Delete templates.
Drafts
Lists all messages saved as drafts after
their creation, or automatically saved
if you quit the MMS menu before
saving or sending your message.
You can Play, Edit, Send and Delete
drafts.
Messages you have saved can only be sent from the
Draft or Outbox folders. You can NOT recover an item
(whether message, notification or report) that you
have deleted. Press c to cancel deletion.
Settings
Your phone may have been pre-configured to directly
access the services offered. If not, you must have
received from your operator the information items
described in the present section and enter them as
given.
With some operators, access parameters can be set
«over the air». Please check directly by your operator.
Multimedia messaging
Network account
Allows you to choose a data profile from the ones you
have set (see “Access settings” page 38 for complete
information on how to configure or modify a data
profile). This profile and the parameters it features
will then be used for connection.
Bearer
This menu allows you to select the type of network
used when launching a connection.
GSM
Your mobile will only use the GSM
network for connections.
GPRS
Your mobile will only use the GPRS
network for connections.
GPRS first
Your mobile will first try to connect to
the GPRS network, then to the GSM
network if the GPRS network isn’t
available when connecting.
MMS Centre
Allows you to enter or change the MMS address of the
server your phone will connect to.
17
Gateway address
Allows you to enter or change the IP address of the
server’s gateway.
Manual
Gateway port
Allows you to enter or change the Port number of the
server’s gateway.
You must have the information relating to the three
points above, supplied by your operator, and must
enter them exactly as given.
Application settings
Retrieval mode
Automatic
Any new MMS you receive is
(default mode) automatically downloaded from the
server and placed in the Inbox, without
you having to launch a connection.
Select the message you have received
in the Inbox and press >.
This mode is deactivated when
roaming.
Messages are stored on the MMS
server, and you must connect
manually to retrieve them:
1. Press , to access the Inbox.
2. Select the notification item
corresponding to this message
and press ,.
3. Select Read and press ,.
4. When the Details of the message
are displayed, press , to
launch the connection and
download it.
5. Once the message is in your
phone, press ,, select Play
message and press ,.
Delivery report
This option can be set On or Off and informs you (via
an SMS) whether your MMS was received or rejected.
The delivery report will display the sender’s identity,
date and time of receipt, MMS subject and status of
delivery.
Read report
This option can be set On or Off and informs you (via
an SMS) when the status the MMS you have sent has
18
Multimedia messaging
changed, i.e., whether it was read or deleted without
being read.
Auto save
This option can be set On or Off and allows you to
automatically save of the messages sent from the
Outbox menu. Messages saved will then appear in the
Outbox folder.
(maximum). This is useful when the recipient is not
connected to the network (and thus cannot receive
your message immediately).
Slide duration
Allows you to select the duration between each slide
included in your MMS, from 1 sec. to 60 secs.
Validity period
Allows you to select the length of time your message
is to be stored on the server, from 1 hour to 1 week
Multimedia messaging
19
5 • Text or number entry
Text can be entered in editing screens in two different
ways: by using T9 ® predictive Text Input, or basic
text input. Two other modes for numbers and
punctuation marks, are also available. Icons appearing
on the screen show the active text mode.
T9® text imput
What is it?
How to use it?
Alphabets and symbols represented by each key are as
follows:
2 to 9 To key in letters.
< or > To browse the list of candidate words.
,
To confirm entry.
c
Short press to clear one entry, long
press to clear all text.
0
Shift from standard, to lower, to
upper case.
*
Shift from basic mode to numeric
typing mode.
#
Shift to symbols and punctuation
mode.
®
T9 predictive Text Input is an
intelligent editing mode for messages,
including a comprehensive dictionary.
Tegic Euro. Pat.
It allows you to quickly enter text. Press
App. 0842463
only once on the key corresponding to
each letter needed to spell a word:
keystrokes input are analysed and the word suggested
by T9 ® is displayed in the edit screen. If several words
are available according to the keys used, the word you
entered is highlighted: press > to browse the list
and to choose from those proposed by the T9 ® builtin dictionary (see example below).
Example: how to enter the word «home»:
1.
2.
3.
20
Press 4 6 6 3. The screen displays
the first word of a list: Good.
Press > to scroll and select Home.
Press, to confirm selection of the word
Home.
Text or number entry
Basic text input
If you wish to access the basic text input, select «Abc»
basic text input using * key. This method requires
multiple key presses to reach the desired character: the
letter «h» is the second letter on the 4
key, so you must press it twice to enter «h». Using this
mode requires you press a key as many times as is
equal to the order of the letter.
To enter the word «Home» in basic text input mode,
you should therefore key in 4, 4 (GHI) 6,
6, 6 (MNO), 6 (MNO), 3, 3 (DEF).
Press , when the message is completed.
Text or number entry
Letters, numbers and symbols are located on each key
as follows:
Short press
Long press
1 space . , @ / : ; “ ’ ! ¡ ? ¿ # + - *
1
2 abcàäåæç
2
3 d efé è∆Φ
3
4 ghiΓì
4
5 jk lΛ
5
6
6
=%<>()&£$¥
mnoñòö
7 pqrsβΠΘΣ
7
8 tuvüù
8
9 wxyzøΩΞΨ
9
0 Shift letter case
0
21
6 • Phonebook
in one of the Phonebooks, they will only be added to
the one you have selected.
All operations described in this chapter require the
relevant Phonebook, whether in the SIM or in the
phone to be selected.
The Delete all option does NOT apply to the SIM
phonebook.
Copy all to phone will copy the content of your SIM
card into your phone. Selecting this option twice will
duplicate all the names.
Your mobile phone has two phonebooks. The SIM
phonebook is located on the SIM card and the
number of entries depends on the card capacity. The
second phonebook is built into the mobile’s memory
and can hold up to 299 names.
The SIM card capacity depends on the type of card you
have. Please check with your local dealer for full
information on this subject.
The phonebook located on your phone shares the
mobile capacity and memory with other features. As
such, they are inter-dependent: the more names you
create, the less events you can store and vice-versa. 299
is the maximum number of names and events cards,
provided that other features (memos, sounds, pictures,
etc.) are not using a significant amount of the phone’s
memory.
The Phonebook menu allows you to select one of the
two available phonebooks: the one on your SIM card
or the one in your phone. When entering new names
22
SIM card phonebook
If you are using a SIM card for the first time, follow
the standard SIM card installation procedure as
described page 1, then go to the section titled “Add
names in the phonebook” below.
Press , and select Phonebook,
Phonebook set., Phonebook select. Then
Phonebook select. press + or - to select the
phonebook located in your SIM card. Names added
to this phonebook can then be copied into the
phonebook located in your phone.
If you cancelled or aborted the automatic copy of your
SIM phonebook at very first switch, you can do it
manually: press ,and select Phonebook,
Phonebook set., then Copy to phone.
Phonebook
When you copy the contents of your
SIM phonebook into your phone, you
In SIM card
can still use the phonebook of your SIM
card, even though it features less fields of information.
Phone’s phonebook
Your mobile phone only manages one phonebook at a
time and will ignore the information relative to the
other one: e.g., if «Smith» is present in both
phonebooks and if you delete it in the phone, it
remains unchanged in the SIM.
The default selected phonebook is the
one located in your phone. It can hold
In phone
up to 299 names and can be reset at
once using the Delete all option. Depending on SIM
card capacity, names added to this phonebook can
then be copied into the SIM phonebook (see “Copy
to SIM” page 27).
Add names in the phonebook
2.
Enter the name, then the number of your choice
and press ,.
A number can contain a maximum of 40 digits,
depending on your SIM card.
Entering all numbers, including local ones with
international prefix, country code and area code will
allow you to dial them from any location.
3.
Select the type of number allocated to the name:
Phone, Fax or Data and press , to confirm
and store this name in your phonebook.
In the phone
The phonebook in your phone can holds more
information fields than the SIM card phonebook.
Including (in latin characters):
First and last names fields
up to 20 characters
Numbers fields
(Mobile, Work, etc.)
up to 40 digits
and 1 «+»
Extra fields (e-mail and note)
up to 50 characters
In the SIM card
Group selection
20 groups available
To add a name in the SIM phonebook:
1. Press - to enter the phonebook, select New,
then press ,.
You can create up to 299 records, holding up to a
maximum of 7 information fields for each, with a
maximum of 5 numeric fields. For example, you can
Phonebook
23
save 2 mobile numbers, 3 work numbers, an e-mail
address and a text note, all for the same person.
Add a record in the phone’s phonebook
Add a name field
1.
2.
Press - to enter the Phonebook, select
<New>, and then press ,.
Enter the last name of your contact and confirm
by pressing ,, then enter their first name and
confirm by pressing ,.
One of the two name fields can be empty, but not both.
To go back to the previous field, press c.
Add a number/text field
1.
2.
3.
24
After entering the name of your contact, you will
be in the Number type menu. You can choose
from numerical fields (Mobile, Fax, Data, Pager,
Home, Work) or alphanumeric fields (Note, email). Make your selection and enter the relevant
number or text. Then press , to save this
new record.
The phone will then prompt you the Group:
choose the group you want this name to belong
to and press , to confirm. The record is then
saved in your phone’s phonebook.
You can associate a specific Melody and Picture to
each group, as well as Rename groups. Select
Phonebook > Phonebook set. > Groups setting,
then refer to “Fotocall: see and hear who’s
calling” for complete information). When
receiving a call from a contact associated to a
group, the melody and/or picture defined for
this group will automatically ring and/or appear
on the inner screen.
Own numbers
The Own numbers option that appears in your
phonebook should contain your own phone number.
If not, we advise that you enter your mobile number
as well as any other relevant information.
Although all its fields can be empty, the «Own
numbers» item cannot be deleted.
Fotocall: see and hear who’s
calling
This feature is only available when you select the
phonebook of your phone, NOT the SIM phonebook.
The Fotocall feature allows you to personalize the
groups available with their own name («Friends»,
«Office», etc.), a given picture (from the Picture album)
and a given melody (from the Ringers list).
Phonebook
You can link one or several contacts from your
phonebook to a group. When a name in that group
calls, the contact’s name will appear along with the
defined picture of that group. The melody defined for
that group will also ring.
For that important person, why not set up a group just
for them. Use the camera to save their picture in the
Picture album and Sound recording to save their voice
as a ringer. When they call, you will truly be able to
see and hear them (for camera, see page 83 and for
sound recording, see page 62).
1.
2.
3.
4.
To use Fotocall, you need to be using the
phonebook in the phone; if you are not already
doing so, see “Copy of the SIM phonebook”
page 3.
Then select Groups setting, press , and select
the group of your choice.
Rename the group to be identified («Friends»,
«Kids», etc.) and select the Melody and the
Picture to be associated to this group.
Long press c to go back to idle, then - to
display the content of your Phonebook. Select a
contact you wish to link to this group and
Phonebook
press ,. Then choose Select group and select
the group of your choice.
When this contact calls you, the Melody and Picture
associated to his group will ring/appear on the inner
screen. The predefined icon (which you cannot
change) linked to this group will appear on the
external mirror screen.
Edit and manage names
Once you have stored names in your phonebook,
press - when in idle mode to access the
Phonebook. You can search for a name in the
phonebook by pressing the corresponding key for the
letter that you want to go to in the list (e.g., press 8
twice to access the letter «U»). The first record starting
with this letter is selected in the list. Depending on the
phonebook menu you have selected, you will have
access to part or all of the following options:
• Delete
• Send an SMS
• Show
• Send an MMS
• Copy to SIM
• Make default
• Flash dial
• Copy to phone
• Change type
• Change name
• Call
• Include in a group
• Delete all
• Associate a voice dial
25
In the SIM card
Select a name in the SIM card phonebook, then press
, to access one of the following options:
- Delete to delete the selected name and number,
- Change to change the selected name and all
related information,
- Copy to phone to copy the selected name and
all related information into the phonebook
located in your phone.
In the phone
Add a field
1.
2.
3.
To add a new field to an existing record, select
the name of your choice, select Show and press
,.
Select <New> and press ,. Choose the type
of field to be added and press ,. Enter the
number or text, then press , to save changes.
Repeat steps 1 and 2 to add up to 6 fields to the
same record. Make a short press on c to go
back to the previous menu, or a long press to go
back to the idle mode.
Numbers or text will appear in order of creation date.
The first fax or phone number you enter becomes the
default number. As such, it appears in first position in
the list. To make another number default, see “Make
26
default” page 27. Alphanumeric fields (note and email) can only be changed or deleted.
Change a field content
1.
2.
3.
To change the content of a field in an existing
record, select the name of your choice, press
,, select Show and press , again.
Select the field to be changed in the list and press
,.
In the carousel that appears, select Change and
press ,. Make the changes wanted and press
, to save them.
Change a field type
To change a field type of an existing
record, repeat steps 1 to 3 of the
Change type
“Change a field content” paragraph.
Then select Change type in the carousel menu, select
the new type of number and press , to confirm
your choice.
If you copied your SIM phonebook into your phone,
some numbers might appear as being of «No type» and
don’t have any icon. «No type» numbers can be
changed: follow the procedure described previously to
define a type for these numbers.
Phonebook
Delete a field
To delete a field of an existing record,
repeat steps 1 to 3 of the “Change a field
Delete
content”paragraph. Then select Delete
in the carousel menu, and press , to confirm.
Make default
The first number you enter when
creating a new record becomes the
default number: it will appear first on
the fields list and is automatically called when pressing
the pick-up key or when pressing , and selecting
the Call or Send SMS option. To change the default
number (e.g. make the «Work» number default
instead of the «Home» number), repeat steps 1 to 3 of
the “Change a field content” paragraph. Then select
Make default in the carousel menu, and press , to
confirm.
Make default
Make calls
Emergency number
The emergency number will call the
emergency services number in your
country. In most cases, you can call this
number even if your keypad is locked and if you haven’t yet entered your PIN.
SOS Call
Depending on the network operator, the emergency
number can be dialled without the SIM card being
inserted. In Europe the standard emergency number is
112, in the UK it is 999.
1.
To call this number, enter it in idle mode by
pressing the corresponding keys, or press ,
and select Phonebook > View Names List >
Emergency number.
Press ( to dial and press ) to hang up.
Copy to SIM
2.
As mentioned earlier, entering names in
the SIM phonebook can be useful if you
Copy to SIM
change phones frequently. If you copy
phone numbers into the SIM card, your phonebook is
always updated when switching phonebooks or when
using another phone.
To copy a number into the SIM card phonebook,
repeat steps 1 to 3 of the “Change a field
content”paragraph. Then select Copy to SIM and press
Other number
Phonebook
Enter a number
Call
In idle mode, enter a number by
pressing the corresponding keys. Press
( to dial and press ) to hang up.
Pressing , will let you access a carousel allowing
you to call this number, store it or send a SMS.
27
Select a name
1.
2.
3.
•
•
28
Press - and select the record of your choice.
If you selected the phonebook in your SIM card:
- once the record is selected, simply press (
to call or
- press , twice to access the next carousel,
then select Call and press , to dial the
number.
If you selected the phonebook in your phone:
To call the default number:
- once the record selected, simply press ( to
dial or
- press , to access the record carousel, then
select Call.
To call any other number, choose Show once the
record is selected and choose a number type in
4.
the list (Mobile, Home, etc.). Press
access the next carousel and select Call.
In all cases, press ) to hang up.
, to
Use Flash dial
In idle mode, press and hold a key
between 2 and 9 to dial the
Flash dial
associated entry (see “Hotkeys”
page 31): connection is established. Press ) to
hang up.
Use Voice dial
In idle mode, press and hold ,, then
pronounce the saved voice tag (see
Voice Dial
“Voice dial” page 35). If the phone recognizes the voice tag, it dials the number associated
with it. Press ) to hang up.
Phonebook
7 • Settings
The Settings menu allows you to customise your
phone and change the settings related to each available
option (sounds, time and date, security, etc.). The
Profiles menu allows you to change several settings at
once (see page 40).
Sounds
Allows you to set the Silence mode On
or Off. When this setting is On, all alerts
are deactivated and the vibra alert is
active.
The Silent mode also applies to key tones.
Ringer volume
Ringer volume
By default the ringer volume can be set
to Medium. Press + or - to set the
volume of your ringer from Silent to
Increasing.
Settings
Allows you to set an alert beep On or
Off, for each time you receive a new
Messages Ringer
message. When On, this option also
allows you to select the alert of your choice from the
ringers list.
Equaliser
This option allows you to choose from
different audio settings, also available
while a call is in progress. In this case,
press ,, select Equaliser, scroll through the list and
wait a few seconds to hear the difference. Press ,
to confirm your choice.
Equaliser
Key tones
Ringer
Ringer
You will not hear the melody if the volume ringer is set
to Off or if the Silence mode was activated (see page 6).
Messages Ringer
Silent
Silent
you receive (from e-mail, SMS, etc.). Scroll through
the list by pressing + or - and wait to hear the
selected melody being played. Press , to select this
melody as ringer, c to cancel, or move to the next
melody.
Allows you to select the ringer tone
from the choices available. The list also
includes melodies attached to messages
Key tones
Allows you to set the key tones On or
Off. Even when set Off, DTMF are
played during calls (see page 79).
29
Sounds Alerts
Allows you to set alert beeps On or Off
for the following items:
Sounds Alerts
- when an Event you programmed in your
organiser is due,
- when you have missed a call,
- when the Battery is low and requires charging,
- to manage the duration of your calls, first
after 45 seconds, then every minute of an
ongoing call (the beep cannot be heard by the
caller).
This menu only allows you to activate/deactivate the
alert sounds, NOT the alerts themselves. E.g. setting
the event alert Off will not prevent your phone from
displaying the Reminder screen (if you programmed
one), but the corresponding sound will not be played.
Display
Screen saver
Allows you to set the screen saver On or
Off. When On, it will run a slide show
Screen saver
in idle mode, by using the jpeg file(s)
you have stored in your phone and selected.
Setting the Screen saver Off automatically activates
the Economy mode, i.e., the current time displayed on
a black background. This mode increases the
autonomy of your phone (increases your battery life).
1.
Vibra alert
When setting the screen saver On, select a
picture in the list that appears by pressing <
or > (you deselect it also by pressing these
keys), then press - to move to the next
picture. Once you selected the pictures of your
choice, press ,to activate the screen saver.
Allows you to set the vibra alert On or
Off when receiving a call, when an event
Vibra alert
set in the organiser is due, when you
receive a message and when the alarm rings.
You must select several pictures (up to 10) in order to
display a slide show. When selecting only one picture
to be used as screen saver, only this picture will be
displayed.
The vibra alert is always Off you connect the charger
or the Cigarette Lighter Adapter.
2.
30
Select Start delay and press + or - to
choose a value. When in idle mode, the screen
Settings
3.
saver will start according to the time limit you
have set.
Then select the Display period and press ,.
The timing you have set will be applied between
each picture of the slideshow.
Animation
Allows you to set the animation of the
carousel menus On or Off. When On,
Animation
this option will also scroll texts, such a
message selected in the Read SMS menu.
Deactivating this function increases the autonomy of
your phone.
Backlight
The backlight is activated when
receiving incoming calls or messages,
Backlight
browsing lists and menus, etc. Press
+ or - to set the backlight Duration by
selecting one of the available values and press , to
confirm.
Deactivating this function increases the autonomy of
your phone.
Settings
Wallpaper
Allows you to set the Wallpaper On or
Off. When On, and if you didn’t
Wallpaper
activate a slide show, the picture(s) you
selected is (are) displayed in Fade mode in menus, list
and edition screens and in Normal mode in idle,
when browsing the Picture album, as well as when
using the Screen saver and Fotocall.
Only JPEG type pictures can be used as Wallpapers.
Hotkeys
Instead of entering the various menus and browsing
the lists, you can set up direct access to a specific
function by linking it to a Hotkey. A long press on the
key will then automatically activate the function or
call the associated number (Flash dial).
You can only program keys 2 to 9 and #, as
keys 0 (select language) and 1 (call voice
mailboxes) are predefined and locked, preventing
reprogramming. Depending on your service provider,
other hotkeys may be predefined and locked.
1.
Select a key from 2 to 9 and press ,.
31
2.
Browse the list to select the function you wish to
associate with this key (see list following). Press
, to confirm your choice.
If the selected key is already set, you can reprogram it:
select Settings > Hotkeys > a hotkey in the list. Press
, twice, select Change and press ,. This will
bring you to the list of available functions.
3.
To use the hotkeys, simply press and hold the
key corresponding to the function you want to
launch or to the number you want to dial while
in idle mode.
You can associate hotkeys 2 to 9 to the
functions of the following table:
Flash Dial
Dials the associated number of the
phonebook.
Instant message
Activates the Instant message feature,
to quickly Reply to the sender of the
received message.
Active. Silence
Activates the Silence profile (vibra on,
ringer volume off).
Activate Car
Activates the Car profile (ringer
volume high, any key answer).
Activ. Headset
Activates the Headset profile (ringer
volume medium, any key answer on).
Meeting
Activates the Meeting profile (vibra on,
ringer and all keys set to silent).
Activ.Outdoors
Activates the Outdoors profile (ringer
volume high).
Opens the Send Messages menu.
Send SMS
Activates the Personal profile.
Activ. Personal
Opens the Read Messages menu.
Read SMS
32
Settings
Activ. Autonomy
Activates the Autonomy profile, which
extends the battery autonomy
(animation off, vibra off, backlight off,
ringer volume medium).
Total cost
Subscription dependent.
Add new event
Opens the Add event menu of the
Organiser.
Show events
Displays the Events list of the
Organiser menu.
Alarm Clock
Opens the Alarm menu.
Direct access to the Calculator.
Calculator
Redials the last number called.
Redial last no.
Reply last no.
Redials the number of the last call
received.
Dials the emergency call number.
SOS call
E-mail
Displays the Total cost of outgoing
calls.
Allows to record a new sound.
Record
Opens the E-mail menu for access to
the mail boxes.
Launches a WAP session.
WAP
Subscription dependent
Displays the remaining credit balance.
Show balance
Settings
Subscription dependent
Opens the Screen saver On/Off menu.
Screen saver
33
To voice mail
Forwards ALL calls to the voice
mailbox.
Voice mail box
Dials the number of your voice
mailbox.
Brick Game
Instead of entering the various menus
and browsing the lists, you can also set a
Voice Command voice tag that will activate a feature
(e.g., launch the Calculator).
Direct access to the Brick Game.
You can associate a Voice command to all the
functions supported by the Hotkeys (see page 31),
except for «Get mail» and «Alarm clock».
Opens the Games menu.
1.
Games
Subscription dependent
-> Euro
Direct access to the Euro converter
(from currency).
Euro ->
Direct access to the Euro converter (to
currency).
The Euro converter is available upon
subscription and only in countries
using the Euro.
34
Voice command
Select Settings > Voice Command > <New> and
press ,, then browse the list to select the
function to be set with a voice tag. Press , to
confirm your choice.
2. When Press OK and speak appears, follow the
instructions displayed on the screen. When
prompted to record your voice tag, make sure
you are in a quiet environment, choose a short
and simple word and clearly pronounce it.
3. Press c and repeat the steps described above
to add more voice commands.
To use the voice command, press and hold , when
in idle mode, then say the recorded voice tag. Words
recorded as voice tags can be played, changed or
deleted at any time.
Settings
Voice dial
Voice dial allows you to quickly call a
name from your phonebook: set a voice
Voice Dial
tag by recording a word that will call the
corresponding name when pronounced.
1. Select Settings > Voice dial > <New> and press
,.
2. Browse the list to select the call number to be set
with a voice tag. Depending on the selected
phonebook (see page 22):
- SIM phonebook: select a name in the list and
press ,,
- Phone’s phonebook: select a name in the list,
then the phone number of your choice if
several numbers were stored for this name and
press ,.
3. When Add voice tag? appears, press ,and
follow the instructions displayed on the screen.
When prompted to record your voice tag, make
sure you are in a quiet environment, choose a
short and simple word and clearly pronounce it.
To use the voice command, press and hold , when
in idle mode, then say the voice tag corresponding to
the number you want to dial.
Settings
To display the list of voice dials you have defined,
select Settings > Voice Commands or Voice dial and press
,. Words recorded as voice tags can be played,
changed or deleted at any time.
Up to 15 voice tags can be defined and shared between
voice dial and voice command.
Security
Public names
Public names
Allows you to manage a specific names
list, called Public Names list, and restrict
calls to this list via the Call restriction
option.
This feature is subscription dependent and requires a
PIN2 code (see page 37).
Call restriction
Allows you restrict the calls to the Public
Names list. In this case, you can only
Call restriction access the names of the Public names list,
as opposed to the Phonebook of the main menu.
This function is subscription dependent and requires
a PIN2 code (see page 37). Please note that when
35
activating this option, it might also apply to WAP and
e-mail connections over GPRS.
available option, All calls, Voice calls, Data calls or Fax
calls.
Public names
Incoming calls
Allows you to consult and modify your
Public Names list. You can enter a new
Public names name, modify or delete a name in the
list via PIN2 code. Use the <New> option to enter the
name and phone number, then select the number
type: Phone, Fax or Data. Names in this list can be
changed or deleted.
Call barring
This menu allows you to limit the use of
your phone to specific calls by letting
Call barring
you bar both outgoing and incoming
calls. This function is network dependent and requires
a specific call barring password supplied by your
service provider.
Outgoing calls
The Outgoing menu allows you to select
between All calls, International calls and
Outgoing
Intl. Exc. Home calls (the latter allowing
you to call your home country when you are abroad).
You can also Deactivate the bar on outgoing calls.
These menus then allow you to bar, within each
36
The Incoming menu allows you to select
All calls or When roaming. It also
Incoming
provides access to the Cancel menu to
remove bar on incoming calls.
These menus then allow you to bar, within each
available option, All calls, Voice calls, Data calls or Fax
calls.
Status
Status
In each sub-menu (All calls, When
roaming, etc.), the Status option allows
you to know whether a type of call is
barred or not.
Change codes
Allows you to change your PIN and
PIN 2 codes, as well as the call Barring
Change codes code.
Depending on your SIM card, some features or
options may require a PIN2 secret code. This is a
second secret 4 to 8-digit code given to you by your
operator.
If you enter a wrong PIN2 code 3 times, your SIM
card is blocked. To unblock it, request the PUK2 code
Settings
from your operator or retailer.
If you enter an incorrect PUK code 10 times in a row,
the SIM card will be blocked and unusable. If this
happens, contact your operator or retailer.
PIN protection
This allows you to set the PIN
protection On or Off. When On, you
PIN protection
will be asked to enter your PIN code
when switching your phone on.
Contact your phone operator to have full information
about GPRS availability over their network and for
an appropriate subscription. You might also need to
configure your phone with the GPRS settings supplied
by your operator, by using the menus described in this
section.
This menu allows you to define the attach mode of
your mobile phone to the GPRS service:
Always on
Network
Your phone will always register to the GPRS service.
This option allows faster GPRS connection. However
it will increase energy consumption.
This menu allows you to handle the connection
between the phone and the network, register
manually the available networks and manage your
preferred networks.
Your phone will automatically register to the GPRS
service only when required. This option reduces
energy consumption, however it will increase the
connection delay.
GPRS attach
In spite of these settings, you must still select the bearer
(GSM or GPRS) in the menus of each application to
be used (e.g., WAP, MMS, e-mail, etc.).
You cannot change your PIN code if this option is Off.
Your mobile integrates features that
support GPRS (Global Packet Radio
GPRS attach
Service), a service allowing you to
exchange data with high speed rates and to stay always
on-line (i.e. have a permanent connection to the
Internet and WAP).
For data calls
Register again
Provides you with a list of the networks
available in the area when the Manual
Register again
Settings
37
mode is selected. Select the network you want to
register with and press , to confirm.
Some pre-configured profiles might be locked,
preventing re-programming and renaming.
Preferred list
Show
Allows you to build a network list in
order of preference. Once defined, the
Preferred list
phone will try to register on a network,
according to your preferences.
Access settings
This menu allows you to create several
data profiles: when using WAP or when
Access settings sending a multimedia message (MMS),
the selected profile will be used to connect to the
GSM or GPRS network.
All options described below are operator and/or
subscription dependent. With some operators, you
may receive a SMS which contains access parameters
that will be stored automatically. Please contact your
network operator for detailed information on this
subject.
Change name
Change name
38
Allows you to enter or change the name
of the selected profile. Press ,, enter
the name of your choice and press ,
to confirm.
Show
Allows you to visualise all parameters of
the selected profile (ISP number, APN,
etc.), either GSM or GPRS.
GSM settings
Allows you to enter or change the GSM
settings and gives you access to the
GSM settings following items:
Login and Password allow you to enter the login and
password needed. In both cases, enter the information
and press ,to confirm.
Phone Number allows you to enter the phone number
needed to establish a connection. Select Phone
numbers and press ,, then press + or - to
select:
- ISDN No. to enter an ISDN ISP number, OR
- Analogic No. to enter an analogic number.
In both cases, enter the «+» sign followed by the
number provided by your operator and press ,.
Contact your operator to know what type of number
you should select.
Inactivity time allows you to enter an inactivity time
period after which the phone automatically
Settings
disconnects (if a connection was in progress) and
returns to idle screen.
Select Inactivity time and press ,, then enter a value
(in seconds) of over 30 s. and press ,.
GPRS settings
This allows you to change the GPRS
settings, Login, Password and Inactivity
GPRS settings time (the same fields and the same
instructions as for GSM settings, please refer to the
previous section).
APN allows you to enter the address of the external
data network you want to connect to, a text string (or
IP address, e.g., wap.operatorname.fr) used to
establish the connection. Select APN and press ,,
then enter the appropriate address and press ,.
Error messages during connections are mainly due to
incorrect parameters: you should contact your
operator before first use, in order to have the
appropriate settings. With some operators, the access
parameters can be set remotely. Please check with your
operator.
Time and date
This menu allows you to set the time and date, time
zone, daylight savings, and change the clock display
mode.
Clock display
Clock display
Allows you to select Analogue, Digital or
Tiny time formats when shown in idle
mode, by pressing + or -. In all
cases, press , to confirm.
Set date
Set date
Allows you to set the date by pressing
the appropriate numeric keys (you can
also set the date by moving + or
-). Press , to confirm.
Date format
Date format
Allows you to select one of the two
available date formats, either Western
or Thai. Press , to confirm.
Time zone
The time zone and daylight savings are to be set first.
You should then double-check date and time if
previously set. To know which time zone you are in,
Settings
39
we recommend you to check in an atlas or an
encyclopedia.
Language
This menu allows you to select a language for all menu
text. Browse the list and press , to confirm your
choice.
The Time zone option allows you to set
the time zone you belong to, according
Time zone
to GMT (Greenwich Meridian Time).
Move + or - to select the setting
corresponding to your area.
A long press on 0 when in the idle screen
automatically displays this menu.
Daylight saving
Profiles
This setting only concerns countries in which time is
set according to summer/winter time (e.g. Greenwich
Meridian Time / British Summer Time).
This menu allows you to access a group of predefined
settings, which let you quickly adapt your phone to
your environment by changing several settings at
once. For example, selecting Meeting will set your
ringer volume to silent, activate vibra and deactivate
the key tones (the other items are set according to the
settings you configured). When your meeting is over,
selecting Personal will reactivate all your usual settings.
This option allows you to set the
daylight savings to On (in summer
Daylight savings time) or Off (in winter time) by moving
+ or -. As this setting impacts the date and
time option, it should be set first. If daylight saving is
On and you set the time to 12:00, it will automatically
switch to 13:00 when turning the option to Off.
Set time
Set time
40
Allows you to set the time by pressing
the appropriate keys or moving + or
- to increase or decrease the time
minute by minute.
When you associate a hotkey to a profile (e.g. long press
key 3 activates Meeting, see page 31), also long
press this key to deactivate it and go back to the
Personal settings.
The settings listed in the column Personal, in the
following table, are default settings preset during
production. As you can change them, the personal
settings in your phone may differ from the table.
Settings
Each
box of the table refers to the settings as
stored in the Personal menu (whether you have
changed the settings or not).
*
Profiles
Personal
Autonomy
Vibra alert
On
Off
Ringer volume Medium Medium
Key tones
On
Organiser alerts
On
Battery low alert On
New SMS tone
On
Backlight
10 sec
Off
Any key answers Off
Animation
On
Off
Settings
Outdoors
Meeting
High
On
Silent
Off
When connecting an accessory, the settings described
in the table below also become available. When
disconnecting the accessory, the phone goes back to
the Personal profile.
Accessories
Profiles
Vibra alert
Ringer volume
Key tones
Organiser alerts
Battery low alert
New SMS tone
Backlight
Any key answers
Animation
CLA or Charger
Headset
Off
Activate Car
Medium
Off
High
On
On
On
41
8 • Messages
phone) or to the unique phone number (phonebook in
SIM)
1.
SMS
The Send SMS item of the Messages
menu allows you to:
2.
Send SMS
•
•
•
send a standard or customised short text message
to someone,
edit the last message sent and send it again,
add an iMelody, pre-defined sounds, an animation or a picture to your message.
The features above are not available from the idle
mode when the Instant message feature is On (see
page 54). In this case, you can only access the Answer
option.
The Standard SMS messages are displayed in a list.
Press + or - to browse: for example Please call
me back at... allows you to select a pre-configured
message including your number, if this number is the
first one of the Own numbers option (see page 24).
Send a SMS
To a name in the list
To the default number if several (phonebook in
42
Press -, select the name of your choice and
press ,.
Select Send SMS and press ,, then select the
type of message to be sent and press ,. Enter
your message, attach a graphic or a sound if you
wish, then select Send now or Save (see below).
To the number of your choice (phone name list only)
1.
2.
3.
Press - and select the record of your choice,
then press ,, select Show and press ,.
Select the number of your choice and press
,.
Proceed as described in step 2 of the previous
paragraph.
To any other name
To send a short message to someone whose number
isn’t stored in the phonebook, press , and select
Messages, SMS then Send SMS and New. Enter the
phone number to which the message should be sent to
and press ,. Then follow the instructions detailed
above to send a message.
Together with an attachment
This option allows you to attach a sound, picture or
animation to your message and press , to confirm
and attach it to your message. Depending on the type
Messages
of file you want to attach, select Add graphic to attach
a bitmap image or an animation, and/or Add sound to
attach a melody. Select the sub-menu of your choice,
then one of the available items in the list that appears,
and press , to confirm and attach it to your
message.
You can send up to 2 attachments of 2 different types
together with your SMS. Animations and pictures are
exclusive: if you first select an animation, then a
picture, only the picture will be taken into account
and vice-versa.
Some pictures, animations and sounds are pre-defined
and supplied as standard with your mobile phone.
Personal pictures and sounds, e.g., that you have
received via SMS or e-mail and then stored in the
relevant menus, will automatically appear in the
«Own» sub-menus (Own melodies, Own animations,
etc.). You cannot send «Own» items via SMS when
they are copyright-protected.
Send now
Send now
Messages
This allows you to send the current
message you have entered (to learn how
to enter text and numbers, see “Text or
number entry” page 20). Press , to
confirm.
Save
Save
Allows you to store the current message
and its associated icon and melody if
any. Press , to confirm.
Read SMS
The Read SMS option in the Messages
menu allows you to consult the list of
SMS you have saved and received, and
that are first stored on your SIM card. Several options
allow you to then manage them directly on your
mobile phone.
Read SMS
Received Messages
The messages you have received and already read are
labelled with
. Messages received but not yet read
are labelled with a sealed envelope icon. Select a
message and press , to read it. When displayed,
press , to access the following options:
- Reply to the sender,
- Forward the selected message (choose the recipient
in the phonebook or enter a phone number
manually),
- Delete the selected message,
- Store number of the sender if it is attached to the
message,
- Store melody if a melody was sent together with the
SMS,
43
- Store graphic(s) if one or several graphics and/or
animations were sent together with the message,
- Extract a number included in the message itself, if
this number is included in double quotes (several
numbers can be included and extracted),
- Call the sender of the message (operatordependent),
- Move to Archive allows you to store read messages in
the phone memory. Saved messages can then be
consulted by pressing , and selecting Messages,
SMS Archive,
Allows you to delete all the messages of either the Read
SMS (messages on SIM card) or SMS Archive (messages
in phone) lists of the Messages menu.
Moving a message to the archive list deletes it from the
read SMS list.
SMS centre
- Edit a message in the Read or Archive folder, modify
it and resend it to someone (you can add a picture
or a sound).
If a picture or a sound was attached to the message you
edit, you must first detach it and store it in the Picture
album or in the Own melodies menu of the ringers list.
Then re-attach it to your message (see page 42).
Saved Messages
The messages you sent are labelled with
in normal
mode or with a mail box icon in auto save SMS mode
(see page 45). Select the message you want and press
, to read it. When displayed, press , to access
the same options, including storing the caller’s
number.
Delete all SMS
SMS settings
This menu allows you to customise your
SMS via the options described below.
SMS settings
SMS centre
Signature
Allows you to sign your SMS. By
default, your signature is you phone
Signature
number, added at the end of your
message (which length is consequently reduced). You
can Edit the signature, Change and Save it.
Validity period
This feature is subscription dependent.
Validity period
44
Allows you to select your default SMS
centre. If not available on your SIM card,
you must enter your SMS centre number.
Allows you to select the length of time
your message is to be stored in your
SMS centre. This is useful when the
Messages
recipient is not connected to the network (and thus
cannot receive your message immediately).
Reply path
activating the Auto save SMS option (see above), or by
selecting a received message, pressing , twice and
selecting Move to Archive.
This feature is subscription dependent.
E-Mail
Allows you to set the Reply path option
On or Off. When On, it allows you to
Reply path
transmit the number of your SMS
message centre together with the message. Your
correspondent can then reply using your own SMS
centre and not theirs. This speeds up the rate of
transmission.
Delivery report
This feature is subscription dependent.
Delivery report
Informs you via an SMS whether your
SMS was received or not. This option
can be set On or Off.
Auto save SMS
Auto save SMS
Allows you to set On or Off the option
of automatically saving messages sent in
the Archive menu.
SMS Archive
SMS Archive
Messages
Allows you to consult all read messages
you saved and to Reset all archived
messages at once. You save a message by
If not included in your phone subscription, you must
subscribe to an e-mail account (over the phone or via
Internet from a computer) and have received the
settings information from your provider. In this case,
all parameters are communicated to you by your
provider and/or operator as described below and must
be entered as given.
If included in your subscription, you simply have to
enter the login, password and e-mail address of your
e-mail account. In some cases, your operator might
also be your e-mail service provider.
Your phone might have been pre-configured. In this case,
most parameters are already set and you don’t have to
change them (except for Login, Password and E-mail
address which are up to you when creating an e-mail
account).
To enter text and numbers, including specific signs
such as @ or%, see the characters table described
page 21.
45
Settings
GPRS settings
Network access
This menu allows you to enter or
change
the
GPRS
settings
GPRS Settings communicated to you by your operator,
which are: APN, Login and Password. All settings must
be entered as given to you by your operator.
This menu allows you to configure your phone and to
handle the connection to the network, whether GSM
or GPRS, in order to then connect to the appropriate
server that will let you send and receive e-mails.
All options described below are operator and/or
subscription dependent.
1.
2.
Press ,, select Messages > E-mail > E-mail 1 >
Settings and press ,.
Select Network Access and press ,.
Bearer
This menu allows you to select the type
of network used when launching a
Bearer
connection.
GSM or GPRS: your mobile will only use the GSM or
the GPRS network for e-mail connections.
GPRS first: your mobile will first try to connect to the
GPRS network, then to the GSM network if the
GPRS network isn’t available when connecting.
Selecting this option you need to have both GSM and
GPRS settings configured.
46
Error messages during connections are mainly due to
incorrect parameters: you should contact your
operator before first use, in order to have the
appropriate GPRS parameters.
GSM settings
This menu allows you to enter or
change
the
GSM
settings
GSM Settings communicated to you by your operator,
which are: Phone number, Auto disconnection, Login
and Password. Enter them as defined.
Phone Number: allows you to enter the phone number
provided by your ISP and needed to establish a
connection. Press + or - to select:
- ISDN number to enter an ISDN ISP number, OR
- Analogue No. to enter an analogic number, then
press ,.
Contact your ISP to know what type of number you
should select.
Messages
Auto disconnection: allows you to select an inactivity
time period after which the phone automatically
disconnects (if a connection was is progress) from the
network. Press + or - to select a value from 3
to 10min. and press , to validate.
The lack of exchanges with the network (connecting,
sending an e-mail, disconnecting) defines the
inactivity time period leading to auto disconnection.
Login and Password were up to you when you
subscribed to your account. Enter them also as
defined.
E-mail server access
The menus described in this section feature settings
needed to connect to the e-mail server of your Internet
Service Provider (ISP) via your mobile phone. Most
parameters are communicated to you by your service
provider and must be entered as given.
1. Press ,, select Messages > E-mail > E-mail 1 >
Settings and press ,.
2. Select E-Mail server and press ,. The fields to
be completed are the following: POP3 address,
SMTP address, Login, Password and E-Mail
address.
Messages
•
•
POP3 address: allows you to enter the IP or DNS
address of the POP3 server, which is used to
receive e-mails.
SMTP address: allows you to enter the IP or DNS
address of the SMTP server, which is used to
send e-mails.
WARNING ! Network-dependent! For an e-mail connection
via GPRS, if your phone operator is not your e-mail
provider, contact your operator to get the correct address of
the SMTP server and enter it in this field.
In some cases, Login, Password and E-mail address are
up to you when you subscribe to your account. Enter
them as defined.
Account name
This menu allows you to rename the available e-mail
accounts.
An e-mail account might be preconfigured with the
name of your operator. In this case, its name cannot be
changed.
1.
2.
Press ,, select Messages > E-mail > E-mail 1 >
Settings > Account name and press ,.
Enter the new name in the edition window that
appears and press ,.
47
Advanced
The menus described in this section feature advanced
settings that may have been pre-configured, so you
shouldn’t have to change any of them.
If the fields of these menus are empty, or if you
encounter connection problems, contact your ISP.
Port POP3: allows you to enter the POP3 port
number, which is used to receive e-mails.
Port SMTP: allows you to enter the SMTP port
number, which is used to send e-mails.
DNS address: allows you to enter the DNS address of
the external data network you want to connect to.
SMPT authenticat.: allows you to activate/deactivate
the authentication process with the SMTP server.
In most European countries, this menu should be set to
Off: your e-mails will NOT be sent if set to On.
Contact your provider for complete information.
can be forwarded and the attachments visualised with
the appropriate software.
To one or several recipients
1.
2.
If you select the phonebook «On SIM card», you will
not be able to access any e-mail address, but an edit
window will allow you to enter one. See “Phonebook”
page 22 for information on phonebook selection.
3.
4.
Write and send an e-mail
The Send mail menu allows you to send
e-mails to one or several recipients at a
Send mail
time, including with an attachment
such as a jpeg picture. Once received, your messages
48
Press ,, select Messages > E-mail, then E-mail 1
or E-mail 2 depending on the one you wish to
use. Select Send mail and press ,.
Move -to select Add addressee and press
, to access the list.
5.
6.
Select a name in the list and press , to add it
to your mailing list or press c to cancel and
go back to the previous sub-menu.
Back to the Addressees list, press , to Change
the e-mail address or to Remove it from the list,
or select Add addressee, press , to access the
phonebook again and add new names to the
mailing list.
Repeat steps 2 to 4 to add as many recipients as
required.
Select Validate list and press ,. Then enter the
subject of your e-mail (you can leave this field
empty) and press ,.
Messages
7.
In the next window, enter the text of your e-mail
(you can also leave this field empty). Press ,
when you are ready to send your e-mail.
To learn how to enter text, see “Text or number entry”
page 20. If you exit the Send e-mail menu before
sending your e-mail, its content is deleted without
being stored.
8.
9.
Select Modify mail and press , if you want to
change the content of your e-mail. This takes
you back to step 2: follow the instructions from
there to complete the list of recipients and send
your e-mail.
Select Send now and press , to send your
e-mail. Your mobile phone connects to the
Internet server, sends your e-mail to the names
present in your mailing list, then disconnects.
You can cancel this operation by pressing and holding
the c key. Your mobile will then disconnect from
the server, exit the e-mail menu and go back to idle.
Disconnection also occurs each time you enter the
Settings menu while a connection is in progress. In this
case, your e-mail is lost.
Depending on the call settings you configured (see
“Call waiting” page 69), you can receive calls during
Messages
an e-mail connection. In this case, and if you accept
the incoming call, your phone switches to the call
screen context and the e-mail menu is closed; the
phone goes back to idle when you hang up.
With a sound or a picture
1.
2.
Repeat steps 1 to 7 described above. Select Add
sound or Add graphic and press ,.
In both cases, a list appears, showing the
available JPEG, BMP, GIF, AMR or Midi files.
Select the picture and/or sound of your choice
and press ,.
You can only attach one JPEG file at a time. If you
exit the Send e-mail menu before sending your e-mail,
its content (including attachment) is deleted without
being stored.
3.
Select Modify mail or Send now and press , to
confirm.
Receive and read e-mails
E-mails are received on a server, which
you must connect to in order to retrieve
your e-mails on your mobile phone
(some operators send you a SMS when you receive a
new e-mail). You must first download the headers
from the server before retrieving the corresponding
e-mails.
Open mailbox
49
Connect to the server
Connection process
1.
Press , and select Messages > E-mail, then Email 1 or E-mail 2 depending on the one you wish
to use. Select Open mailbox and press ,.
Mailboxes 1 and 2 feature the same settings and
options. Configuring them differently will allow you
to have two different e-mail addresses from your
phone.
2.
3.
4.
50
Your mobile phone automatically connects to
the e-mail server and downloads the e-mail
headers. If you didn’t receive any e-mail, List
empty is displayed on the screen. Otherwise, the
e-mail headers are displayed in the form of a list.
The total number of mails received and pending
on the server is displayed on the top of the
screen, as well as the number of pages needed to
display all headers.
Your mobile phone retrieves five e-mail headers
at a time. If Next (respectively Previous) appears
at the end (respectively beginning) of the list,
other e-mail headers are pending: select one of
the available options and press , to retrieve
them.
An e-mail without any attachment may be
automatically displayed in the details screen.
Headers information
Select a header, press ,, select Details and press
, again to see the address it was sent from, the date
and time at which it was sent, its subject and the size
of the attachment if any. The following status icons
may appear in regards to each header:
[No icon] The e-mail can be downloaded.
The e-mail size is too large, it cannot be
downloaded.
The e-mail is marked to be deleted (see
page 52).
Download e-mails
Simply select one of the retrieved e-mail
headers and press ,. Then select Get
Get mail
mail and press , to download the
e-mail. Repeat this operation to download each e-mail
corresponding to each selected header.
You can also press , to access the e-mail header’s
carrousel and select Get mail from the available
Messages
options. If the e-mail is too big (over 50 KB), it is
rejected and the download is cancelled.
Get and store attachments
If the e-mail you have received contains attachments
(JPEG picture, text file or another e-mail), they are
characterised by a specific icon:
Contains the details of the e-mail header (date
and time, sender’s e-mail address, etc.), press
, to display these details.
The text of the e-mail itself can be viewed as an
attachment, press , to read it. There isn’t
any advanced options in this situation: it can be
read, but not stored nor forwarded.
A text file (text only, «.txt» format) is attached
to the e-mail, press , to read it. There isn’t
any advanced options in this situation either.
The application needed to manage this
attachment isn’t available in your phone, or the
e-mail is too large to be uploaded.
Messages
Another e-mail is attached to the one you
received (up to five e-mails can be attached one
after the other). There isn’t any advanced
options for an attached e-mail: it can be read,
but not stored nor forwarded.
A picture in JPEG, BMP or GIF format is
attached to this e-mail. Select the attached
picture in the list and press , twice to store
it in your mobile phone (you can rename it if
you wish).
You must have stored a picture before being able to
view it via the Picture album menu. See “Picture
album” page 60 for more details. If there isn’t enough
memory to store the new picture, you must delete other
items (name, event or picture) to release enough
memory to be able to save the new picture.
A picture may not be accepted by your mobile phone
if it is too large, or if it doesn’t have the right file
format. When receiving a picture via e-mail, proceed
as follows to obtain optimal results:
• The picture received must have been saved in
JPEG, BMP or GIF format.
• The size of the picture file should not exceed
50 KB.
51
•
•
The optimal size is 128 x 128 pixels, in order to
be displayed correctly. We recommend you use a
standard picture editing software to create the
size of the picture you want.
Use a file name, a maximum of 10 characters.
You can then add an extension such as «.jpg».
Delete e-mails
1.
2.
Add an e-mail address to the phonebook
You must have selected the phonebook in your phone
to be able to add an e-mail address; this menu item
will NOT appear if you selected the SIM phonebook.
You can add the sender’s e-mail address
to your phonebook, even when you
Add to names haven’t yet downloaded his e-mail
(retrieving the header only is sufficient to access the
e-mail address).
1. Select an e-mail header, then press , to access
the carrousel options.
2. Select Add to names and press ,. Then select:
- <new> to create a new name, enter first and
last name then add the associated e-mail
address, or
- a name in the list and press , to add the
e-mail address to this name card. If it already
contains an e-mail address, you will be
prompted to press , to replace it.
52
Select the e-mail to be deleted and press , to
access the options.
Select Delete, and press , to confirm and
mark the e-mail to be deleted. A small icon
allows you to spot the header(s) of the list
corresponding to the e-mail(s) to be deleted.
To unmark the e-mail to be deleted, select this option
again.
3.
When you exit the E-mail menu, you will be
asked to confirm deletion of the selected item(s)
from the e-mail server. Press , to confirm or
c to cancel (in this case, the marked e-mails
remain in the list and aren’t marked to be deleted
any more).
Reply to an e-mail
1.
2.
Select the header of the e-mail you want to reply
to, press , to access the options menu, then
select Reply and press ,.
The address of the sender, which you can modify
(see “To one or several recipients” page 48), is
automatically added to the Addressees list. Select
Validate list and press ,.
Messages
3.
4.
A new screen appears, that contains the subject
of the received e-mail preceded with Re: standing
for «Reply». Press ,.
Enter the text of your mail, then press , to
send it: select Send now and press , to send
your reply.
Forward an e-mail
In order to forward an e-mail to another recipient,
you must first have downloaded it (see “Download
e-mails” page 50). From the Forward to option,
proceed as described above in “Reply to an e-mail”.
In both cases (reply to an e-mail or forward it), your
phone will disconnect from the server when reaching
the network inactivity time out set in the Auto
disconnection menu (see “Bearer” page 46). It will
reconnect to this server when sending the e-mail.
Broadcast message
The Broadcast SMS feature is network-dependent.
Broadcast SMS
Messages
You can Activate or Deactivate the
reception of SMS broadcast regularly
transmitted to all subscribers on the
network.
Reception
Reception
Allows you to set the reception of cell
broadcast messages On or Off. When
On, you must define one or several
topics as described below.
Topics
Allows you to define the type of
messages you want to receive. To define
Topics
a new type, select <New>, enter the
code provided by the operator, and, if desired,
associate a name. If you select an existing type in the
list, you can change or delete it. You can enter up to
15 different types in the list. To obtain the codes
corresponding to the different types, contact your
operator.
District codes
Allows you to select the type of
messages you would like to be
District Code
permanently displayed on the idle
screen. As a result, for this special treatment of the
message, you must enter the type in both the District
code and the Topics menu.
53
Instant message
Allows you to set the Instant message feature On or Off.
When On, any short message (SMS) you receive is
automatically displayed in idle mode.
Scroll down to read it, and quickly reply by pressing
, twice: first to enter the edition screen, then to
54
send your message. The phone will automatically go
back to the idle screen.
If you receive a second SMS while you are reading one,
press c to exit the first one or reply to it. The
mobile phone will then display the second message.
Messages
9 • Mix music
Your mobile phone features BeDJ, an application that
will allow you to create, mix and share electronic
music as well as use your mix as ringers.
With BeDJ, you can create your own sound by using
a predefined BeDJ style (as explained below), or any
SP-MIDI or MIDI ring tones present in your phone,
or that you downloaded via WAP, E-mail, etc. (refer
to relevant chapters in the present user manual for
complete information). You can then send your own
mix to friends and relatives, use it as a ringer or an
alarm, etc.
How to...
Switch BeDJ On/
Off
Press the b key to switch
on, OR
Press , and select
Multimedia > BeDJ.
Press and hold c to
switch off.
Activate/deactivate
a track
Press a key from
9.
1 to
Press c to deactivate all
tracks at once.
Record the mix
(start and stop)
Press 0.
Activate the
Tempo field
Press #.
Open the track
selection list
Open the
Help screen
Open the
Options list
Press and hold a key from
1 to 9.
Press * .
Press ,.
Within BeDJ, the colour orange always shows the
information currently in use, or a selected item.
Get started
Activate tracks
1.
Mix music
Launch BeDJ by pressing the b key or
press, and select Multimedia > BeDJ.
55
2.
3.
4.
5.
In the BeDJ screen that appears, the default
music style is selected (e.g., Groovy, Techno,
etc.).
In the upper left part of the screen, a small table
displays the current tempo value, the status of
the recording (Off by default) and the name of
the track.
In the bottom part of the screen, 9 tracks are
available, linked to keys 1 to 9 and which
you can mix: press the key corresponding to the
track you want to activate.
A total of 16 tracks are available: press and hold
keys 1 to 9 to open the track selection
list. Key 5 is always dedicated to the voice
track.
The activated track appears in orange, and the
above table displays the name of the relevant
melody and instrument.
Melody
1.
2.
Instruments
1.
2.
56
The current instrument used in the selected
melody is the first one highlighted in the list.
Move - or + to select the next or previous
instrument, then press , to select it.
Change the tempo
1.
2.
Change track melodies and instruments
Press and hold keys 1 to 9 according to the
track you would like to change. In the list that
appears, you can change first the current melody used
by the selected track, then the instruments used in the
melody.
The current melody used in the selected track is
the first one highlighted in the list. Move +
or - to select another one (which is
automatically played when selected), then press
, to confirm your choice.
The name of the selected melody is displayed in
the upper part of the screen. Press > to access
the instruments list used in this melody.
3.
Press # to activate the Tempo field.
The Tempo (displayed in bmp or «beats per
minute») applies to all tracks. Press the
highlighted < or > keys to increase or
decrease it.
You don’t have to save the Tempo, which is
automatically taken into account.
Press c ,, or # to go back one screen.
You cannot change a Tempo while playing tracks or
during a mix recording.
Mix music
Record a mix
Start recording
1.
When ready to record your mix, press 0. The
timer starts and the On air red icon is selected.
While recording your mix, you can:
Manage the recording
As soon as you stop recording your mix, a window
automatically opens and displays the following
options for you to choose from:
Remix
Allows you to record a new mix by
using the same tracks.
Re-play
Plays the mix you just recorded.
Move+or - To increase/decrease the current
track volume.
Store
Opens the Save window, for you to
name and save your mix.
Move<or > To highlight the previous or next
track.
Send by MMS Allows you to send your mix as part of
a multimedia message (MMS).
2.
Press keys
1 to 9
3.
To activate the relevant track.
Press 0 to stop recording.
The recording will stop automatically when the mix
reaches 50 KB (approximately 2 min.). Capacity depends on the memory available in your phone: select
Multimedia > Memory Status for memory information.
Mix music
Send by e-mail Opens the E-Mail menu so that you
can send your mix via e-mail.
The recording you save will appear under the name of
your choice in Settings > Sounds > Ringer list as well as
in Multimedia > Sound album. You can select it as a
ringer for incoming calls and new events.
57
Create your own style and mix
From scratch
Advanced options allow you to create and mix your
own styles of music, either directly from the BeDJ
styles available (e.g. Groove, Techno, Disco, etc.), or
from the ringers list (e.g., Bach, Cool, Dream, etc.).
2.
The ringers list includes the MIDI files you might have
downloaded via e-mail, WAP, etc.
1.
3.
From existing files
1.
2.
3.
4.
When the BeDJ screen is active, press , to
access the options list.
When selecting Mix ringers or BeDJ styles, simply
choose one of the available melodies in the list
and press , to confirm your choice.
The phone automatically goes back to the BeDJ
screen, and the melody associated to the ringer
you have selected is divided into tracks.
As described above, you can then activate and
deactivate tracks, record your mix, etc.
The number of active tracks depends on the melody
you have chosen.
58
4.
5.
6.
When selecting Advanced, BeDJ opens a
complete new set of empty tracks.
Press and hold 1: the list of all the MIDI files
present in your phone appears on the screen.
Select one of them and press ,.
A new list appears, showing all tracks of the
selected MIDI file (max.16). Move + or
- to select one of them, then press , to
apply it to key 1.
Repeat these two steps to apply tracks of your
choice to keys 2 to 9 of the phone.
When ready, record your mix (see page 57).
Press , twice to go back to normal mode.
Have fun and mix: you can apply any of the 16 tracks
of any ringer of your choice to 1 to 9 key of your
phone! This makes thousands of possibilities that allow
you to completely personalise your own mix.
Save your own styles
You can save your own Style in the BeDJ styles menu,
and reuse it later to create another mix. This new style
will contain all the tracks you have mixed, but without
the effects applied to the mix.
Mix music
Receive a call
1.
When receiving a call while BeDJ is activated, your
mobile phone will automatically mute the sound.
2.
Mix music
Answering the call will quit BeDJ and your
phone will return to idle when you hang up.
Rejecting or ignoring the call will allow you to
stay in the BeDJ screen.
59
10 • Multimedia
Picture album
JPEG pictures must have the correct size and format
for your mobile phone to store and display them correctly. Please check “Get and store attachments”
page 15 for complete information on this subject.
This menu allows you to manage and
display the pictures stored in your moPicture Album bile phone.
When entering one of the available sub-menus, the
pictures stored in your phone are displayed as a text
list. To access the graphical display, select a picture in
the list and press >. Then press + or - to go
to the next or previous picture, or < to go back to
the text list.
Press , to access the following options:
Rename
To Rename it: press ,, enter a
name and press , again.
Delete
60
Send by Email To send the selected picture via
E-mail (see “E-Mail” page 45 for details).
Rotate
To rotate the picture of 90° or 270°:
press , to confirm your choice.
Set as
wallpaper
To set the selected picture as
Wallpaper (this option must be set On
in Settings > Display, see page 30).
Pictures in the Standard Pictures folder cannot be
deleted. New pictures are stored in Own Pictures. If
there isn’t enough space to store a new picture, you
must delete some other pictures to release memory.
Sound album
This menu allows you to manage and
listen to the sounds stored in your moSound Album bile phone.
When entering one of the available sub-menus, the
sounds are displayed as a text list. Press + or to go to the next or previous sound and wait for a few
To Delete the selected picture.
Multimedia
seconds for the sound to be played. Select a sound and
press , to access the following options.
Rename
To Rename it: press ,, enter a
name and press , again.
Memory status
Delete
To Delete the selected sound.
Set as
messages
ringer
To set the selected sound as Messages
ringer (this option must be set On in
Settings > Sounds, see page 29).
This menu allows you to display the
percentage of memory available in your
Memory status phone. Several features share the mobile
capacity: pictures and sound album, recorded memos
and voice tags for voice commands, messages you have
stored in the phone, phonebook and organiser entries,
games, etc.
You will not be able to send sounds that are protected
by a copyright. Sounds in the Standard melodies
folder cannot be deleted.
Your mobile phone is supplied with many sounds and
pictures. You can only delete sounds or pictures in the
Own Pictures or Own Melodies folders, e.g., to free
memory space for your own sounds and pictures.
Demo mode
Press , to launch the Demo movie.
Demo mode
If you turned the phone on without having inserted a
SIM card, this menu is available in the first menu
level.
Multimedia
Press , to check the memory status. The display
shows you the percentage of memory free and the
phone’s total memory in KB. Press , again and access the detailed list of memory used by each feature.
If «List full» appears when saving a new item or to free
memory space, you must delete an item to be able to
create or add a new one.
61
Sound recording
This menu allows you to record a sound
of 1 min. maximum, and up to 20 difSound recording ferent sounds, depending on the Memory status.
Press , and select Multimedia > Sound recording,
then press ,again. Select <New> to record a new
sound. Follow the instructions on the screen and press
, once your sound is recorded. You can then Delete or Rename it.
62
Memos can then be used as alarm or incoming call
ringers, sent together with a message, etc. Voice memos
previously saved cannot be sent by MMS.
BeDJ
BeDJ
This menu allows you to launch BeDJ:
press , (see “Mix music” page 55 for
details).
Multimedia
11 • Games and appli.
Calculator
Calculator
This menu provides the following
functions:
Addition
By pressing the * key.
Subtraction
By pressing the * key twice.
Multiplication By pressing the * key 3 times.
Appli > Alarm clock, then press + or - to
activate it. Enter the time, then press , and select:
- Once activates the alarm at a set hour on a set day,
- Every day activates the alarm at a set hour every day
of the week,
- On weekdays activates the alarm at a set hour on
weekdays only.
Then select one of the alarm alerts. Select an item in
the list if required, and press , to confirm your
choice.
The alarm clock will ring even if you turned off your
phone, and even if the Ringer volume is set to Off (see
page 29). Press any key to stop the alarm ringing.
Division
By pressing the * key 4 times.
Organiser
Equals
By pressing the # key.
Create a new event
Enter the figures using the keypad. Calculator
accuracy is to 2 decimal places and is rounded up to
the higher decimal figure. Press c to correct the
numbers. Press and hold 0 to get the dot. Press
and hold c twice to return to idle mode.
Alarm clock
Alarm clock
This menu allows you to set the alarm
clock. Press , and select Games &
Games and appli.
The Events menu allows to create events
and store them in your organiser.
Organiser
Events can be Meetings, Holidays or
ToDos. When the organiser alert is On (see page 30),
a beep alerts you when an event is due.
1. Select Organiser > Events > <New> and press
,.
2. Select the type of event to create (Holiday,
Meeting, ToDo) and press ,.
63
3.
4.
Enter the starting and ending date & time of the
event and press ,, enter the text concerning
the event (e.g. «Meeting with Smith») and press
,.
The Set Reminder menu reminds you of events
via alerts triggered at the chosen time. Move
< or >, set the Reminder for this event
and press ,.
This menu only applies to Meeting and ToDo events.
Note that the reminder depends on the time set and
displayed on the screen. As such, it will be updated
when changing time zones (see “Time and date”
page 39).
5.
6.
Move < or > to set the Repeat Event
option for this event and press ,.
The events will be listed using start time and
date. From the events list,
- press and hold c to go back to the idle
screen,
- repeat steps 2 to 5 to create more events.
The organiser shares the mobile capacity and memory
with other features (phonebook, picture album, sound,
etc.). As a consequence, all features are interdependent: the more events you create, the less names,
memos or pictures you can store, and vice-versa.
64
299 is the maximum total of events + names you can
store.
If «List full» appears, delete an event (or name) to be
able to create a new one. To check the memory
available in your phone, press , and select
Multimedia > Memory status.
Modify an event
Change an event
When creating an event, not all fields
are available, this is designed so make
Change
creating a new event quicker. When
changing an event, these further options become
available.
1.
2.
To change an event, select the event of your
choice and press ,.
When your phone displays the details of the
selected event, press ,, select Change and
press , again.
Changing a repeated event will also modify all
instances of this event: in this case, press , to
confirm.
3.
Change any information as needed and as
described above.
Games and appli.
Deleting an event
Deleting a single event
Select the event of your choice and press , twice.
Then select Delete and press , to confirm.
Deleting a repeated event
•
•
By selecting a past occurrence: select a past
occurrences of an event and press ,. When
the event details appear, press ,, then select
Delete and press , to confirm: only the past
occurrences of the selected event are deleted.
By selecting a future occurrence: select a future
occurrence of an event and press ,. When
the event details appear, press ,, then select
Delete and press , to confirm: all occurrences of the selected event are deleted.
Deleting past events
You can also delete past events by
selecting Delete past at the first level of
the Organiser menu. In this case, enter
the starting date (past or future) from which all
previous events will be deleted and press ,twice to
delete all events preceding this date.
Delete past
To delete all events set in your organiser, enter a
starting date several years ahead (e.g., 3st of
Games and appli.
December, 2010). This way, you make sure all events
preceding this date are deleted at once.
Views of events
The Day view, Week view and Month view display in
the respective format all events stored in your
organiser. To display events in these views, proceed as
follows:
1. Select the view of your choice and press ,.
2. Once you entered the selected view, move <
or > to display the previous or next day,
week or month.
3. Press , to display the list of corresponding
events or to create a new one.
Time zone
Although changing time zones is
necessary when travelling a lot, be aware
Time zone
that it will impact all organiser
reminders: the event alarms will be updated
depending on the time displayed on the screen (see
“Time and date” page 39).
Zoo
Zoo
This menu allows you to set a funny zoo
animation that will be displayed on the
mirror FX screen. When set to On, the
65
animation can be launched only when the phone is
closed and in idle mode.
1. Select On, then an animation in the list. Press
,to confirm.
Selecting All will play a different animation each time
you launch the zoo feature.
2.
3.
To launch the animation, close your phone and
long press the side key up when in idle mode.
Press any key or open the phone to stop it.
When receiving a call while the animation is
playing, your mobile phone will automatically
stop the animation and return to idle mode
when you hang up.
The sound played is linked to each animation. You
cannot change it.
Crazy clock
This menu allows you to set a funny
clock animation that will be displayed
Crazy clock
on the mirror FX screen. When set to
On, the animation is played only when the phone is
closed and in idle mode.
1. Select On, then a clock animation in the list and
press ,.
66
2.
3.
Select the frequency of the animation (every
quarter, half hour or hour) and press ,.
The animation will be played at the frequency
that you have defined. Press any key or open the
phone to stop it. When receiving a call while the
animation is playing, your mobile phone will
automatically stop the animation and return to
idle mode when you hang up.
Zoo and crazy clock animations cannot be played at
the same time.
Euro converter
-> Euro
Euro ->
The -> Euro menu enables you to
convert a sum into Euros by entering
the amount and pressing ,.
The <- Euro menu enables you to
convert a sum from Euros by entering
the amount and pressing ,.
The currency used for the conversion is determined by
the country where you have subscribed. The Euro
converter is available upon subscription and only in
countries using the Euro.
Games and appli.
Brick Game
When you have destroyed the last brick, you access
the next level. Keys used are the following:
This menu can be subscription dependent. As such its
icon and content may vary.
4and 6 To move the racket left or right.
Brick Game
This menu gives you access to the brick
game. The object of the game is to
destroy the bricks by hitting them with
the ball.
Games and appli.
* and # To throw the ball left or right. Press
either of these keys to start the game.
0
To pause the game; pause time is
limited to 2 min. after which the
screen returns to idle mode and the
game is lost.
67
12 • Call information
Call settings
This menu allows you to set all the call
options (call forward, waiting, etc.).
Call settings
from the call transfer, which takes place when one/
several calls are in progress.
Unconditional
The unconditional option will divert all the incoming
calls.
Warning! When selecting this option, you will not
receive any calls at all until you deactivate it.
Active flip
Conditional
When activated, this option allows you to pick up an
incoming call by simply opening the phone. A beep
also indicates the end of the communication when
hanging up.
This option allows you to choose in which
circumstance(s) you want to divert incoming calls.
Three options are available: If no reply (you haven’t
replied to the call), If not reachable (your network isn’t
available) or If busy (you are already on the phone and
your subscription doesn’t include the call waiting
option or you haven’t activated it). Each option can
be set independently.
Once you have selected either Conditional or
Unconditional, choose whether you want to divert calls
to your voice mailbox or to another phone number, or
cancel the call forward.
Rejecting calls isn’t possible in this case as you must
open the phone to access the ) key and manually
reject the call.
Call forward
Allows you to divert incoming calls
either to your mailbox or to a number
Call forward
(whether in your Phonebook or not) and
applies to: Data calls, Voice calls and Fax calls.
Before activating this option, you must enter your
voice mailboxes’ numbers (see “Mailboxes” page 69).
This feature is subscription dependent, and different
68
Status
Status
Allows you to display the status of all
call forwarding.
Call information
Mailboxes
Mailboxes
Call waiting
This menu allows you to enter your
voice mailbox numbers (if not available
on your SIM card).
In some cases, you might have to enter two numbers:
one to listen to your mailbox, the other one to forward
calls. Contact your operator for more information on
this subject.
Auto redial
Allows you to set the auto redial On or
Off. When On and if the person you are
calling is busy, your phone
automatically redials this number until a successful
connection is made, or until the maximum number of
attempts is reached (10). The phone emits one beep at
the beginning of each attempt and one special beep if
the connection is successful.
Autoredial
The time between redials increases with each attempt.
Call waiting
With GSM call
Allows you to Activate or Deactivate the
call waiting and applies to: All calls,
Voice calls, Fax calls and Data calls.
When this option is active, you hear a beep if someone
tries to call you while already on a call. Select the
Status option to find out whether the GSM call
waiting is active or not.
With GSM call
This function is subscription-dependent. Contact your
operator.
With GPRS call
With GPRS call
Any key answer
Call information
Allows you to Activate or Deactivate the
call waiting for voice incoming calls
while a GPRS connection in ongoing.
Caller ID
Any key answer
Allows you to accept a call by pressing
any key, except ), used to reject a
call.
Call waiting is managed differently
depending on the type of network
(GSM or GPRS) you have selected.
Caller ID
Allows you to Show or Hide your
identity to your correspondent. The
Status option will inform you if this
function is activated or not.
69
Call list
This menu provides you with the list of
outgoing and incoming calls, as well as
Call List
attempts at auto redialling and call
details. The calls (made, missed and received) are
displayed in chronological order with the most recent
on top of the list. When the Call list is empty the
screen displays List empty.
Call list
Reset
Call counters
Call counters
From the main carousel, press ,
then select Call Info > Call list > Call list
Call list
to display the call list. Use + and
- arrows to scroll the list and press , again to
consult the date, time, number, call status of any
selected call and to know if it was sent or received.
Press , for access to a carousel which allows you to
Call this correspondent, Send a SMS, Delete the
selected call or Store the associated number.
Reset
redial directly any of these numbers. In idle screen,
move + to access the Call list. If a number listed is
also in your Phonebook, the corresponding name is
displayed. Move + or - to select the number to
redial and press (. Press ) to hang up.
Press,, select Call Info > Call list,
then Reset. Press,twice to reset.
This menu allows you to handle the cost
and duration of your calls.
GSM counters
This menu gives you access to the
options described below.
GSM counters
The GSM Call Counters do not include WAP
connections. Most options mentioned below are
subscription-dependent.
Total duration
Total duration
Select this option and press , to
Show or Reset the time duration of
Outgoing or Incoming calls.
The phone stores the last 30 numbers in the Call list,
the most recent number being displayed first. You can
70
Call information
Last call information
This feature is subscription dependent.
This menu allows you to display the
duration and/or cost of your last call.
Show balance
Last call info
Info at call end
This feature is subscription dependent.
Info at call end
Allows you to activate or deactivate the
systematic display of the length and/or
cost of each call when hanging up.
Cancel cost limit
Allows you to check the remaining
credit (compared with previously set
limit).
Allows you to cancel the cost limit. It
may be protected by PIN or PIN2
codes (depending on your subscription).
Allows you to enter the cost limit used
in the Show balance menu.
Cost limit
Total cost
This feature is subscription dependent.
Allows you to display the accumulated
cost and to set the counter to zero. It
Total cost
may be protected by PIN or PIN2
codes.
Show
Reset
Shows how much has been spent, having established the charge rate.
Allows you to reset the current Total
cost to 0; requires your PIN2 code.
Call information
Charge rate
Allows you to set or change the rate
per unit. First enter the currency used
(three characters maximum) then enter the cost per unit.
GPRS counters
This feature is subscription and network dependent.
GPRS counters
This menu allows you to select either
one of the following options:
71
Last mobile session
Mobile session
This option will display the last
connection session or transfer volume
of your mobile phone (e.g., after a WAP
connection over GPRS).
Last PC session
PC session
72
The call counters managed by your mobile phone
might differ from the ones used by your operator. You
should therefore consider the call counters displayed on
the screen as informative items, but NOT as the actual
charge rate basis.
This option will display the last
connection or transfer volume of your
PC transmission.
Call information
13 • WAP
Your mobile phone supports services
based on the Wireless Application
WAP
Protocol (WAP). The built-in WAP
browser allows you to access services supplied with
your network, such as news, sports, weather, etc.
Your mobile phone readily supports the WAP function
if it is included in your subscription; if your phone was
pre-configured, it shouldn’t be necessary for you to
change the settings described in this section.
With some operators, WAP parameters can be set
remotely. Please check directly with your operator for
detailed information.
Internet services
This main menu of the WAP browser allows you to
configure the settings related to WAP, connect to
your operator’s homepage, define bookmarks for
direct and faster connections, etc.
Launch a WAP session
1.
To launch a WAP session, press and hold the
@ key while in idle mode.
WAP
You can also select Operator Services > WAP >
Homepage and press ,.
2.
3.
4.
5.
Your mobile phone will connect to the network
and according to the Access settings you have
defined in the menu Settings > Network (see
page 37).
The browser is launched and an animation
shows that your phone is connecting to your
operator’s homepage.
Move + or - to navigate the on-line
pages, and press , to select a highlighted
item.
Press c to return to the previous page.
End a WAP session
To end a WAP session, press and hold c, OR press
@, select Options > Exit and press , to confirm.
Homepage
The Homepage is the link to the first WAP site you
will access when launching WAP from the idle screen.
In most cases, this menu item of the WAP services
menu is preconfigured and will connect directly to
your operator’s WAP homepage.
You can change this default homepage by specifying
the name and URL address of another homepage,
73
which will then replace the current one (see “Save as
homepage” page 77).
Bookmarks
This menu allows you to store your favourite WAP
site addresses, rename them if desired and access them
quickly from the list.
This can also be done while browsing: press @ to
access the Options, then select Bookmarks. In this case,
the Name and URL fields will be automatically filled
in with the information contained in the page you are
browsing.
Add bookmarks
1.
2.
3.
4.
Select WAP > Bookmarks > Add bookmark and
press ,.
Start entering the new name: an edit screen
automatically appears.
Press , to save the name you entered.
Press - to move to the address field and
proceed the same way to enter the WAP address.
Manage bookmarks
This menu allows you to Delete the stored
bookmarks, or to Edit them in order to change their
name and/or address. In both cases, press , to
confirm.
74
Use bookmarks
To connect to a WAP site you have stored as a
bookmark, simply select it in the list and press ,
to launch the connection.
Enter address
This menu allows you to enter a WAP site address, to
which you can connect directly when selecting it and
pressing ,. This is a quick way to access WAP
addresses without saving them as bookmarks.
1. Press , and enter the URL address of the
desired homepage.
2. Press , to connect to this page.
All the addresses you enter in this menu and connect
to at least once, will appear in a list: select one of the
items and press , to reconnect to the corresponding
page, without having to enter the complete address
again.
Settings
Edit Homepage
Allows you to change the Homepage name and
address:
1. Press , and start entering the new name. An
edit screen automatically appears.
2. Press , to save the name you entered.
WAP
3.
Back to the Edit Homepage menu, press - to
move to the address field and proceed the same
way to change the address.
Select Profile
This menu allows you to select one of the available
profiles, and to then define the connection settings for
each of them: scroll + or - to choose the profile
of your choice, then press < or > to select /
deselect it and press , to confirm.
All connection settings described below will apply to
the selected profile, which you can then rename for
easier identification.
Connection
Select connection
Allows you to select one of the data profiles you have
defined in Settings > Access settings (see page 38 for
detailed information on this subject).
In the list that appears, select the connection setting of
your choice and press , to confirm.
Bearer
Allows you to select the type of network used by the
selected profile when launching a connection.
GSM or GPRS: your mobile will only use the GSM or
the GPRS network for WAP connections.
WAP
GPRS first: your mobile will first try to connect to the
GPRS network, then to the GSM network if the
GPRS network isn’t available when connecting.
Selecting this option requires you to have configured
both GSM and GPRS settings. See page 38 for details.
Proxy address
Allows you to specify a proxy gateway address to be
used when launching a WAP connection using the
selected profile. Press , and enter the address of
your choice, then press , to confirm.
Press and hold 0 to enter a dot «.»
Proxy port
Allows you to specify a proxy port number, in case the
proxy you are using requires a different port number.
Press , and enter the number of your choice, then
press , to confirm.
Security
Certificates
Select this menu and press , to display the list of
installed security certificates. Select one of the items in
the list and press , to display its details or delete it.
75
Session info
Push inbox
Allows you to display information about the current
WAP session: security type, class, etc. Press c to go
back one page.
This menu allows you to read and manage messages
automatically sent to you by the network and / or by
your operator.
1. If you have been informed that you received a
push message, press , to read it.
2. Otherwise, select Operator Services > WAP >
Internet services > Push inbox and press , to
access the list of messages.
Current certificate
Allows you to display the currently used security
certificate. Press c to go back one page.
Rename Profile
This menu allows you to rename the currently
selected profile: enter the new name (an edit screen
automatically appears), then press , to save the
name you entered.
Browser Options
This menu allows you to activate/deactivate the
downloading of images attached to WAP pages. Select
Never or Always and press , to confirm your
choice.
Selecting Never will speed up the global downloading
time of the pages browsed.
Cache
Messages with high priority feature an exclamation
mark together with the read / unread icon.
3.
4.
5.
6.
Press + or - to browse the list and select
the message of your choice, press , to read it.
If the message contains a WAP address (or
URL), press , to connect to the
corresponding WAP site.
To delete one of the push messages, select Push
Inbox > Manage messages and press ,.
Select the message to be deleted and press ,
to confirm.
This menu allows you to empty an area of the phone’s
memory where the pages browsed during a WAP
session are stored. Select Clear cache and press , to
confirm your choice.
76
WAP
Save as homepage
Options
While browsing Internet pages, press the
access the options described below.
@ key to
The menus that are common to both Internet services
and Options menus are described in the above section.
Homepage
Gives you direct access to the Homepage of the WAP
site you are currently browsing.
Back
Brings you back to the previously browsed page.
You must have browsed at least 2 pages for this option
to be available.
Forward
Takes you to the next browsed page (e.g., when you
have previously selected Back).
Refresh
Will reload the currently browsed page from its
original server.
This menu option allows you to save the currently
browsed WAP page as the default homepage.
1. Select Save as homepage and press ,. The
URL address of the page you are browsing
automatically appears in the Address field.
2. Enter a name for this homepage and press ,.
3. Back on the Internet services menu, the
homepage name will be the first item on the list.
Press the @ key while in idle mode to connect
automatically to this page.
Save as...
When browsing WAP sites, this menu option allows
you to save images embedded in the pages that are
displayed.
1. While browsing, scroll + or - to select
the picture.
2. Once the picture is highlighted, press @ to
access the Options. Select Save as... and press
,.
3. Rename the picture if desired and press , to
save it in the Picture Album.
Exit
Allows you to end a WAP session: press
confirm and to quit WAP.
WAP
, to
77
Receive a call
When receiving a call whilst connected to WAP:
1. Answering the call will quit the WAP application
and disconnect the current session. Your phone
78
2.
will return to the last browsed page when you
hang up, but the connection itself will be lost.
Rejecting the call will bring you back to the
preview screen.
WAP
14 • Operator services
Most items of the Operator Services menu (e.g.
Service numbers, Services +) are subscriptiondependent and specific to operators: your mobile
phone readily supports them if they are included in
your subscription. Consequently, the menus shown
following may or may not be available. Contact your
network operator for detailed information on
availability and rates.
The services provided may involve making a phone
call or sending a SMS for which you may be charged.
GSM strings
The phone supports standard GSM strings that can be
sent from the keypad to the network and used to
activate services provided by the network.
• Example n° 1
Press * 4 3 #, then (, to activate the
Call Waiting service.
• Example n° 2
Press * # 3 1 #, then (, to know
if the mobile identification has been sent.
• Example n° 3
Operator services
Press * 6 1 #, then (, to activate the
feature call forward if no reply.
• Example n° 4
Press * 6 2 #, then (, to activate the
feature call forward if unreachable.
Contact your network operator
information on GSM strings.
for
detailed
DTMF tones
Some phone services (such as phone answering
machines and pagers) require your phone to transmit
DTMF tones (Dual Tone Multi Frequency), also
known as “touch tones”. These are used to
communicate passwords, callback numbers, caller
choices, and so on.
You can send DTMF tones at any time during a call
by pressing any of the keys 0 to 9, * and
#. You can also attach a DTMF sequence to a
phone number before dialling it (or storing it in the
Phonebook). The phone number and the DTMF part
must be separated by a wait character.
Pause and wait characters
To obtain a pause or wait character, press and hold
#. The display shows w for a wait and p for a
pause. The phone always interprets the first pause
79
character as a wait character. When you dial a number
containing a wait character, your phone dials the first
part (the phone number) and then waits for the call to
be connected before sending the rest of the digits as
DTMF tones. Any subsequent pause character is an
ordinary pause that generates a delay of 2.5 seconds.
2.
For example: access your answering machine
To hear all messages (e.g. code 3) on your answering
machine (password 8421) at phone number
12345678, you could call: 12345678w8421p3.
The phone dials 12345678 and waits for the call to be
connected. When connected, the phone transmits
8421 (the password), pauses 2.5 seconds, and then
sends the last digit. If you find that 2.5 seconds is not
long enough for your needs, you can enter several
pause characters one after the other to increase the
pause time.
Make a second call
You can make a second call during an active call or
during a call on hold. You can switch between the two
calls (the cost displayed on the screen depends on local
charge rate).
1. While already on the phone, dial a number then
press (. The first call is put on hold and the
80
3.
4.
number is displayed at the bottom of the screen.
The second number is then dialled.
To toggle between the two calls, press , then
select Switch calls. Each time that you toggle
from one call to another, the active call is placed
on hold and the call which was on hold is
activated.
To hang up the active line, press ). The active
line is hung up and the call on hold remains as
such.
To end the call on hold, use Switch calls to reach
it, then press ) .
Notes:
The second number can be dialled either from the
keypad or from:
- the phonebook, by pressing -, then selecting the
name to be called,
- the Call list, by pressing +, then selecting the
number to be called.
Answer a second call
You are able to receive another call when already in
communication (if this feature is available with your
subscription). When you receive a second call the
Operator services
phone emits an alert beep and the screen displays Call
waiting.
Answer a third call
To receive a second call, you must have:
- subscribed to this feature,
- deactivated the Call forward option for voice calls
(see page 68),
- activated the Call waiting option (see page 69).
Subscription dependent
If you receive a second call, press,, then you can:
• accept the second call: the first one is put on
hold, the second one is active. If you want to
toggle between the two calls, press,then
select Switch calls. Each time you toggle from one
call to another, the active call is put on hold and
the call which was on hold is then activated. To
introduce the new caller into a conference
press,and select Conference.
• reject the second call
• end the active call, then your incoming call is
ringing.
Notes:
- If you also wish to answer the incoming call, press
(; to reject it, press ).
- If you have activated call forwarding ‘If Busy’ (see
“Call forward” page 68), you will never receive second
calls since they are always forwarded when the line is
Operator services
While in communication and one call being on hold,
you may receive a third call. The phone emits an alert
beep. You can either end one of the calls before being
able to answer the third one or introduce the calling
party into a conference (see below). This service is
limited to two current communications (one active
and one on hold).
Conference call
Subscription dependent
You can activate the conference call by
making consecutive outgoing calls, or
create it from a multiparty call context.
You may have up to five members at the same time
and end the conference with ). At this point all
calls are disconnected.
In order to make consecutive outgoing calls, first
initiate a normal call with the first number of the
conference. When the first member is on line, initiate
a second call as described in “Make a second call”
above. When the second call is engaged, press ,
Conference
81
and select Conference. Repeat the above process until
five members are connected.
If there is an incoming call during the conference call
and there are less than five members, you can accept
this new call by pressing ,. Press , again and
then select Conference to add this member to the
conference call. If there is an incoming call during a
conference with five members already connected, you
can answer this new incoming call, but not add it to
the conference.
While a conference call is in progress, press , to
access the Conf. members options. Disconnect a
member of the conference by selecting Remove party
and pressing , to confirm, or select Private call to
82
have a private call with this member only (other
members are put on hold).
Explicit call transfer
Subscription dependent
You can connect an active call and a call on hold. You
are disconnected when the transfer is completed.
During a call press ,, select Transfer and press
,.
This feature is different from the Call forward, which
takes place before you pick up the call (see page 68).
Operator services
15 • Taking pictures
The camera is an accessory, that is NOT included as
standard in the package when purchasing the phone.
Please contact you local dealer to buy a camera.
None of the settings, features or options described in
the present chapter will be available if you’re not using
a camera with your phone.
Change the camera
mode
Press * to toggle between
Night and Normal mode.
Change the
screen resolution
Press # to switch from
VGA to QVGA to SQVGA to
128 x 128.
Take a picture
Press m when camera
mode active.
Your mobile phone supports a digital camera that allows you to take pictures, store them in your phone,
use them as wallpaper or send them to your friends
and relatives.
Save the picture
Press
shot.
m right after the
Delete the picture
Press
shot.
c right after the
Camera management
Access the shot
options
Press
shot.
, right after the
Access the
camera settings
Press , when camera
mode active.
Activate/deactivate
the self-timer
Press 0.
How to...
Activate/deactivate
the camera
Plug/unplug it into the connector as shown below.
If the camera was already
plugged, long press the m
key to reactivate it.
Zoom in/out
Taking pictures
Press the joystick key
(up) or - (down).
+
Within any menu related to the camera, a long press
on the c key will cancel any current action and
bring you back to idle mode.
83
Plug in the camera
Simply plug the camera jack into the headset socket
on the mobile phone (right hand side), as shown
below. Then press m to display the camera preview
screen, and rotate the camera up or down to get the
shot you want.
Picture shots
General principles
All options and key presses described in the present
section are applicable only when the camera mode is
active, i.e. when the preview is displayed on the screen.
Camera mode
Two camera modes are available: Normal and Night
mode. According to ambiant light level, press * to
toggle between modes, which are reflected by the
camera mode icons (sun & moon) in the bottom of
the screen.
Picture resolution
The lens of the camera is automatically focused.
Icons displayed on top and bottom of the screen allow
you to check the Camera mode, the Picture resolution,
the Zoom mode and the Self-timer activation.
When you plug the camera for a self-portrait, a
viewfinder allowing you to centre the shot is shown on
the external mirror screen.
84
The default picture size of the standard format is
128 x 128. Press # to switch to VGA (640 x 480
pixels) to Q VGA (320 x 240 pixels) or to SQ VGA
(160 x 120 pixels). The Picture resolution you select is
displayed in the bottom right corner of the screen.
Zoom mode
This one-level zoom option is available only in VGA
mode (640 x 480 pixels). If you have selected this
resolution, press the navigation key + or - to
zoom in or out.
Taking pictures
The zoom icon is highlighted when the zoom is
activated. Zoom out is available only after a zoom in.
4.
Self-timer
1.
This option allows you to set the Self-timer option On
or Off (see below for details).
2.
With the m key
2.
If the self-timer option is Off, press the m key
to take a picture, which is then automatically
displayed on the screen.
The number in the upper black bar of the screen
shows its row. The pictures will be named in the
Own pictures menu «img_1.jpg», etc., up to 999.
This does not mean you can take up to 999 pictures
(see “Number of pictures” below), but that pictures,
including the ones you delete, are numbered up to
999. Numbering will then restart from 1 on.
3.
You can then choose to:
- press c to Delete the picture you have
taken,
- press m to Save it,
- press , to access the list of available
options, including sending the picture you
have just taken.
Taking pictures
m again to go back to
With the self-timer
Take a picture
1.
Then press c or
preview mode.
If the self-timer option is On, press m to
activate it (or press 0 if the option is Off).
The count-down starts at -5 seconds (this value
cannot be changed). A beep is played 2 seconds
before the picture is taken, then again when it’s
actually shot.
Beep alarms can be customized via the camera
settings. At any time, press c to stop the timer and
go back to preview mode or press 0 to just stop the
timer.
3.
Once the picture is shot, follow the instructions
starting at point 2 of the previous section.
To take a picture in self-portrait, hold the phone
opened at arms length, camera and mirror screen
toward your face, then centre your shot with the
viewfinder, and press on the m key.
Number of pictures
The number of pictures you can save in the phone will
vary according to the settings you have configured:
the higher the resolution, the bigger the file size.
85
A message will warn you if there isn’t enough memory
to store the picture you have just taken. In this case,
you must delete data (sounds, images, etc.) before
storing a new picture. Select Multimedia > Memory
status to check the memory available in your phone.
Make a call
1.
2.
Review the pictures
The pictures you save are automatically stored in the
Multimedia > Picture album > Own pictures menu.
Select a picture in the list and press > to access the
graphical display. Then press + or - to go to
the next or previous picture, or , to Send, Delete
or Rename the picture. Press < to go back to the
text list.
Receive a call
When receiving a call while using the camera:
1. Answering the call will quit any action linked to
the camera: picture preview, picture shot, selftimer, options browsing, etc. Your phone will
return to idle when you hang up. If you had
taken a picture that was not yet saved, it will be
lost.
2. Rejecting the call will also quit any action linked
to the camera, and will bring you back to the
preview screen.
86
3.
To make a call, you must first long press c or
disconnect the camera to go back to the idle
screen.
Then enter the number or select a name of your
phonebook, press ( to dial and press ) to
hang up.
To take more pictures: if you haven’t
disconnected the camera, long press m to
reactivate the preview screen, otherwise
reconnect the camera.
Settings
Further to the settings that are available directly
within the preview screen as described above, several
menus also allow you to set other options. Press ,
while the camera mode is active to access them.
In all cases, select an option, and press , for the
next picture to be taken using this mode, or c to
cancel.
Colour mode
Allows you to choose a mode available from the
following: Colour, Black & white, Sepia and Blue. The
effect will be applied to the picture according to the
mode you chose (e.g., Sepia will take a brown and
Taking pictures
beige picture, giving the impression of an old-times
picture). The default mode is Colour.
Picture resolution
Allows you to choose one of the two modes available:
Normal and Night. The default mode is Normal.
Allows you to choose a resolution available among the
following: VGA (640 x 480 pixels), Q VGA
(320 x 240 pixels), SQ VGA (160 x 120 pixels) and
128 x 128. The default mode is 128 x 128.
Sounds
Picture quality
Both Alert and Shoot sounds can be set from this
menu. The first one occurs 2 seconds before the
picture is taken, the second one when it’s shot.
In both cases, select On, and press , to access the
list of available sounds. Select one of the sounds, or
<New> to create a new sound, then press , to
activate it.
Self-timer
Camera mode
Taking pictures
Allows you to choose an image quality available
among the following: Low, Medium, High. The default
mode is Medium.
See “Self-timer” page 85.
87
Icons & symbols
In idle mode, several symbols can be displayed
simultaneously either on external screen or main inner
screen.
If the network symbol isn’t displayed, the network is
not currently available. You may be in a bad reception
area: move to a different location.
SMS full - Memory for messages is full. Delete old messages to receive new ones.
Call Forward Unconditional to number All your incoming voice calls are being forwarded to a number other than voice mail.
Silent - Your phone will not ring when
receiving a call.
Call Forward to voice mailbox - All your
calls are being forwarded to voice mail.
Vibra - Your phone will vibrate when
receiving a call.
Home zone - A zone designated by your
network operator. Subscription dependent,
contact your service provider for details.
GPRS attach - Your mobile phone is
connected to the GPRS network.
SMS message - You have received a new
message.
Voice mail - You have received a new voice
mail.
88
Roaming - Displayed when your phone is
registered to a network other than your own
(especially when you’re abroad).
GSM Network: your phone is connected to
a GSM network
Reception quality: the more bars are shown
the better the reception is.
Instant message - option is set to On.
Battery - The bars indicate the battery level
(4 bars = full, 1 bar = low).
Memory full - The phone’s memory is full.
Delete items to store new ones.
Alarm clock activated.
MMS message - You have received a new
multimedia message.
Icons & symbols
Precautions
Radio waves
Your cellular mobile phone is a low power
radio transmitter and receiver. When it is
operating, it sends and receives radio waves.
The radio waves carry your voice or data
signal to a base station that is connected to the
telephone network. The network controls the power
at which the phone transmits.
• Your phone transmits/receives radio waves in the
GSM frequency (900 /1800MHz).
• The GSM network controls transmission power
(0.01 to 2 watts).
• Your phone complies with all relevant safety
standards.
• The CE mark on your phone shows compliancy
with European electromagnetic compatibility
(Ref. 89/336/EEC) and low voltage directives
(Ref. 73/23/EEC).
Your cellular mobile phone is your responsibility. To
avoid damage to yourself, to others or to the phone
itself, read and follow all the safety instructions and
make them known to anyone borrowing your phone.
Precautions
Furthermore to prevent unauthorised use of your
phone:
Keep your phone in a safe place and keep it
out of small children's reach.
Avoid writing down your PIN code. Try to
remember it instead.
Switch off the phone and remove the battery if you are
going to leave it unused for a long time.
Use the Security menu to change the PIN code after
purchasing the phone and to activate call restriction
options.
The design of your phone complies with all
applicable laws and regulations. However
your phone may cause interference with
other electronic devices. Consequently you
should follow all local recommendations and
regulations when using your cellular phone both at
home and when away. Regulations on the use of
cellular phones in vehicles and aircraft are
particularly stringent.
Public concern has been focused for some time on the
possible health risks for users of cellular phones. The
current research on radio wave technology, including
the GSM technology, has been reviewed and safety
standards have been drawn up to ensure protection
from exposure to radio wave energy. Your cellular
89
telephone complies with all applicable safety
standards and the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.
Always switch off your phone
Inadequately protected or sensitive electronic
equipment may be affected by radio energy. This
interference can lead to accidents.
Before boarding an aircraft and/or when
packing the phone in your luggage: the use
of mobile phones in an aircraft may be
dangerous for the operation of the aircraft, disrupt the
mobile phones network and may be illegal.
In hospitals, clinics, other health care
centres and anywhere else where you may be
in the close vicinity of medical equipment.
In areas with a potentially explosive
atmosphere (e.g. petrol stations and also
areas where the air contains dust particles,
such as metal powders).
In a vehicle transporting flammable products (even if
the vehicle is parked) or a vehicle powered by liquefied
petroleum gas (LPG), check first that the vehicle
complies with the applicable safety rules.
90
In areas where you are requested to turn off radio
transmitting devices, such as quarries or other areas
where blasting operations are in progress.
Check with the vehicle manufacturer that
electronic equipment used in your vehicle
will not be affected by radio energy.
Users of pacemakers
If you are a user of a pacemaker:
• Always keep the phone more than 15 cm from
your pacemaker when the phone is switched on,
in order to avoid potential interference.
• Do not carry the phone in a breastpocket.
• Use the ear opposite to the pacemaker to minimise the potential interference.
• Switch off your phone if you suspect that interference is taking place.
Users of hearing aids
If you are a user of a hearing aid, consult your
physician and hearing aid manufacturer to learn
whether your particular device is susceptible to
cellular phone interference.
Precautions
network. Setting the backlight for a shorter
period of time as well as avoiding unnecessary
navigating in the menus will also help to save the
battery’s energy for longer phoning and stand-by
performances.
Performance improvement
In order to improve the performance of your phone,
reduce radio energy emission, reduce battery
consumption and ensure safe operation adhere to the
following guidelines:
For the optimal and satisfactory operation of
the phone you are recommended to use the
phone in the normal operating position
(when not using in hands-free mode or with
a hands-free accessory).
• Do not expose your phone to extreme temperatures.
• Treat the phone with care. Any misuse will void
the International Guarantee.
• Do not immerse the phone in any liquid; if your
phone is damp, switch it off, remove the battery
and let them dry for 24hrs before using them
again.
• To clean the phone, wipe it with a soft cloth.
• Placing and receiving calls consumes the same
amount of battery energy. However, the mobile
consumes less energy in idle screen when kept in
the same place. When in idle screen and while
you are moving, your phone consumes energy to
transmit updated location information to the
Precautions
Information displayed on the
battery
•
•
•
•
•
Your phone is powered by a rechargeable battery.
Use specified charger only.
Do not incinerate.
Do not deform or open the battery.
Do not allow metal objects (such as keys in your
pocket) to short circuit the battery contacts.
• Avoid exposure to excessive heat (>60°C or
140°F), moisture or caustic environments.
You should only use Philips Authentic
Accessories, as the use of any other
accessories may damage your phone and will
make all guarantees for your Philips phone
null and void.
Make sure damaged parts are replaced immediately by
a qualified technician and that they are replaced with
genuine Philips replacement parts.
91
Do not use your phone while
driving
It lowers concentration, which can be
dangerous. Adhere to the following
guidelines: Give your full attention to
driving. Pull off the road and park before
using the phone. Respect the local regulations in
countries where you drive and use your GSM phone.
If you want to use your phone in a vehicle, install the
hands-free car kit which is designed for that purpose,
still ensuring you give full attention to driving. Ensure
that your phone and car kit do not block any air bags
or other security devices fitted in your car. The use of
an alarm system to operate a vehicle's light or horn to
indicate incoming phone calls is prohibited on public
roads in some countries. Check local regulations.
EN 60950 Norm
In case of hot weather or after a prolonged exposure to
the sun (e.g., behind a window or a windscreen), the
temperature of your phone's casing might increase,
especially when featuring a metallic finish. Be very
careful in this case when picking up your phone and
also avoid using it with an ambient temperature over
92
Environmental care
Remember to observe the local regulations
regarding the disposal of your packaging
materials, exhausted batteries and old phone
and please promote their recycling.
Philips has marked the battery and packaging with
standard symbols designed to promote the recycling
and appropriate disposal of your eventual waste.
Battery:
The crossed-out dustbin signifies that
the battery should not be disposed of
with general household waste.
Packaging:
The mobius loop symbol signifies the
labelled
packaging
material
is
recyclable.
The green point symbol signifies that a
financial contribution has been made to
the associated national packaging
recovery and recycling system (e.g.
EcoEmballage in France).
The chasing arrows symbol on the
plastic tray and plastic bag indicate that
the materials are recyclable and also
identifies the plastic material.
Precautions
Troubleshooting
The phone does not
switch on
Remove and reinstall the
battery (see page 1). Then
charge the phone until the
battery icon has stopped
flashing. Finally, unplug
from the charger and try to
switch the mobile on.
The display shows
BLOCKED
when
you switch on
Somebody tried to use your
phone but didn’t know the
PIN code nor the unblocking
code (PUK). Contact your
service provider.
The
and
symbols are not displayed
The network connection is
lost. Either you are in a radio
shadow (in a tunnel or
between tall buildings) or you
are outside the network
coverage area. Try from
another place or contact your
network
operator
for
assistance/information about
the network.
Troubleshooting
The display doesn't
respond (or the display responds slowly) to key presses
The display responds more
slowly
at
very
low
temperatures. This is normal
and does not affect the
operation of the phone. Take
the phone to a warmer place
and try again.
In other cases please contact
your phone supplier.
Your phone doesn’t
return to the idle
screen
Press and hold c, or
switch off the phone, check
that the SIM card and the
battery are installed correctly,
and switch it on again.
Your phone doesn’t
display the phone
numbers of incoming
calls
This feature is network and
subscription dependent. If
the network doesn’t send the
caller’s number, the phone
will display Call 1 instead.
Contact your operator for
detailed information on this
subject.
93
You can’t send text
messages
Some networks don’t allow
message exchanges with other
networks. Contact your
operator
for
detailed
information on this subject.
The display shows
IMSI failure
This problem is related to
your subscription. Contact
your operator.
You can’t receive
and/or store JPEG
pictures
A picture may not be
accepted by your mobile
phone if it is too large, or if it
doesn’t have the correct file
format. See page 51 for
complete information on this
subject.
When charging the
battery the battery
icon shows no bars
and the outline is
flashing
94
Only charge the battery in an
environment where the
temperature does not go
below 0°C (32°F) or above
50°C (113°F).
In other cases please contact
your phone supplier.
The display shows
SIM failure
Check that the SIM card has
been inserted in the right
position (see page 1). If the
problem remains, your SIM
card may be damaged.
Contact your operator.
You are not sure
that you are receiving calls properly
To receive all calls, make sure
that none of the features
«Conditional call forward» or
«unconditional call forward»
is activated (see page 68).
When attempting to
use a feature in the
menu, the mobile
displays not allowed
Some features are network
dependent. They are only
available, therefore, if the
network or your subscription
supports them. Contact your
operator
for
detailed
information on this subject.
Troubleshooting
The display shows
Insert your SIM card
Check that the SIM card has
been inserted in the right position (see page 1). If the
problem remains, your SIM
card might be damaged.
Contact your operator.
Your phone doesn’t
work well in your
car
A car contains many metallic
parts that absorb electromagnetic waves which can affect
the phone’s performances. A
car kit is available to provide
you with an external antenna
and enables you to make and
receive phone calls without
handling the handset.
You should check with local
authorities if you are allowed
to phone while driving.
Troubleshooting
95
Philips authentic
accessories
Charger
Charges your battery in any AC outlet. Small enough
to carry in a briefcase/handbag.
Digital camera
This 360° rotating camera allows you to take pictures,
and to store them in your phone. Supplied with
specific carry case.
Data connect kit
Designed to operate your Philips mobile phone
hands-free and easy to use, this compact hands-free
solution offers a high audio quality.
Simply plug the kit into the vehicle auxiliary outlet.
Easy data connection to your Philips mobile phone:
the USB cable enable high speed connection between
your phone and your computer. Just connect your
phone to the cable for an automatic organiser and
phonebook synchronization within a few seconds.
The provided software allows you to send faxes and
SMS, download pictures and melodies.
Deluxe headset
Carry case
In-line answer button offers you a simplified
alternative to searching for the phone. Simply answer
an incoming call by pressing the button. In idle mode,
press to activate voice dial.
Protects the phone from nicks and scratches. The belt
clip makes your phone easy to carry.
Universal car kit
In certain countries, telephoning while driving is
prohibited. For safe and trouble free installation, we
recommend that specialized technicians install handsfree car kits.
96
To maximise the performance of your Philips phone
and not to void the warranty, always purchase Philips
Authentic Accessories that are specially designed for
use with your phone. Philips Consumer Electronics
cannot be held liable for any damage due to use with
non authorised accessories. Ask for Philips Authentic
Accessories where you purchased your Philips Phone.
Philips authentic accessories
Declaration of
conformity
We,
Philips France
Mobile Telephony Business Creation Team
Route d’Angers
72081 Le Mans cedex 9
FRANCE
declare under our sole responsibility that the product
Philips 639
CT 6398
Cellular Mobile Radio GSM 900/GSM 1800
TAC: 351669
The conformity assessment procedure referred to in
Article 10 and detailed in Annex V of Directive 1999/
5/EC has been followed related to articles 3.1 and 3.2
with the involvement of the following Notified Body:
BABT, Claremont House, 34 Molesey Road, Waltonon-Thames, KT12 4RQ, UK
Identification mark: 0168
The technical documentation relevant to the above
equipment will be held at:
Philips France
Mobile Telephony Business Creation Team
Route d’Angers
72081 Le Mans cedex 9
FRANCE
to which this declaration relates, is in conformity with
the following Standards:
EN 60950, EN 50360 and EN 301 489-07
EN 301 511 v 7.0.1
Le Mans, December 17, 2003
We hereby declare that all essential radio test suites
have been carried out and that the above named product is in conformity to all the essential requirements of
Directive 1999/5/EC.
In case your Philips product is not working correctly or
is defective, please return your phone to the place of
purchase or the Philips National Service Center. In
the event you require service whilst in another country
a dealer address can be given to you by the Philips
Consumer Help Desk in that country.
Jean-Omer Kifouani
Quality Manager
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement