Cortelco 270000TP227S 7 Series Single Line Caller Id Telephone Owner's Manual

Cortelco 270000TP227S 7 Series Single Line Caller Id Telephone Owner's Manual
OWNER’S
INSTRUCTION MANUAL
CALLER ID TYPE II
MULTI-FEATURE TELEPHONE
MODEL 2700
Thank You
for Purchasing the
2700 Caller ID Type II
Multi-Feature Telephone
We want you to know all about your new Telephone, how to install it, the features it provides, and
the services you can expect from its use. We have included this information in your Owner’s Instruction Manual.
PLEASE READ BEFORE INSTALLING
AND USING YOUR NEW TELEPHONE EQUIPMENT.
2
Contents
IMPORTANT SAFETY INSTRUCTIONS���������������������������������������������������������������������������������������������� 5
Telephone Part Identification������������������������������������������������������������������������������������������������������������� 6
INSTALLATION������������������������������������������������������������������������������������������������������������������������������������� 7
ANSWERING MACHINE���������������������������������������������������������������������������������������������������������������������� 7
UNIT SETUP����������������������������������������������������������������������������������������������������������������������������������������� 8
TELEPHONE FEATURES�������������������������������������������������������������������������������������������������������������������� 9
DIALING������������������������������������������������������������������������������������������������������������������������������������������������ 9
RECEIVING A PHONE CALL��������������������������������������������������������������������������������������������������������������� 9
PLACING A PHONE CALL������������������������������������������������������������������������������������������������������������������� 9
PREDIAL����������������������������������������������������������������������������������������������������������������������������������������������� 9
SPEAKER BUTTON ���������������������������������������������������������������������������������������������������������������������������� 9
DURATION COUNTER������������������������������������������������������������������������������������������������������������������������� 9
MUTE BUTTON������������������������������������������������������������������������������������������������������������������������������������ 9
AUTOMATIC MEMORY���������������������������������������������������������������������������������������������������������������������� 10
Storing A Number������������������������������������������������������������������������������������������������������������������������������ 10
Dialing A Number����������������������������������������������������������������������������������������������������������������������������� 10
VOLUME BUTTON����������������������������������������������������������������������������������������������������������������������������� 10
REDIAL BUTTON������������������������������������������������������������������������������������������������������������������������������� 10
PAUSE BUTTON�������������������������������������������������������������������������������������������������������������������������������� 10
HOLD BUTTON���������������������������������������������������������������������������������������������������������������������������������� 10
FLASH BUTTON��������������������������������������������������������������������������������������������������������������������������������� 10
HEADSET BUTTON��������������������������������������������������������������������������������������������������������������������������� 10
DATA PORT���������������������������������������������������������������������������������������������������������������������������������������� 10
CONTRAST BUTTON��������������������������������������������������������������������������������������������������������������������������11
RELEASE BUTTON�����������������������������������������������������������������������������������������������������������������������������11
VOICEMAIL BUTTON��������������������������������������������������������������������������������������������������������������������������11
DIRECTORY BUTTON�������������������������������������������������������������������������������������������������������������������������11
MESSAGE LIGHT��������������������������������������������������������������������������������������������������������������������������������11
MESSAGE WAITING���������������������������������������������������������������������������������������������������������������������������11
KEY TONE�������������������������������������������������������������������������������������������������������������������������������������������11
3
CALLER ID FEATURES����������������������������������������������������������������������������������������������������������������������11
CALL WAITING DISPLAY�������������������������������������������������������������������������������������������������������������������11
RECEIVING CALLS�����������������������������������������������������������������������������������������������������������������������������11
REVIEWING CALLS��������������������������������������������������������������������������������������������������������������������������� 12
DELETING CALLS����������������������������������������������������������������������������������������������������������������������������� 12
CALLBACK����������������������������������������������������������������������������������������������������������������������������������������� 12
7-10-11 BUTTON������������������������������������������������������������������������������������������������������������������������������� 12
MESSAGE ERROR����������������������������������������������������������������������������������������������������������������������������� 12
NO DATA SENT���������������������������������������������������������������������������������������������������������������������������������� 12
PRIVATE CALLS�������������������������������������������������������������������������������������������������������������������������������� 12
UNKNOWN CALLS���������������������������������������������������������������������������������������������������������������������������� 13
USING THE DIRECTORY������������������������������������������������������������������������������������������������������������������� 13
STORING ENTRIES���������������������������������������������������������������������������������������������������������������������������� 13
FINDING ITEMS���������������������������������������������������������������������������������������������������������������������������������� 13
DIALING DIRECTORY NUMBERS����������������������������������������������������������������������������������������������������� 13
DELETING ITEMS������������������������������������������������������������������������������������������������������������������������������ 13
TELEPHONE SERVICE PROBLEMS������������������������������������������������������������������������������������������������ 14
MAINTENANCE INFORMATION�������������������������������������������������������������������������������������������������������� 14
TELEPHONE REPAIR������������������������������������������������������������������������������������������������������������������������ 15
FCC Information�������������������������������������������������������������������������������������������������������������������������������� 15
Limited Warranty������������������������������������������������������������������������������������������������������������������������������� 16
4
IMPORTANT SAFETY INSTRUCTIONS
Always follow basic safety precautions when using your telephone equipment to reduce the risk of fire, electrical shock,
and injury.
1.
Read and understand all instructions in the Owner’s Instruction Manual.
2.
Read all warnings and follow all instructions marked on the product.
3.
Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or
aerosol cleaners.
4.
Do not use the telephone near water. For example, do not use near a bathtub, wash bowl, kitchen sink, laundry tub,
swimming pool, or in a wet basement.
5.
Do not place this product on an unstable cart or stand. The product may fall causing serious damage to the product.
6.
Use only the type power source indicated on the label. If you are not sure of the type power supply to your home,
consult your dealer or local power company.
7.
Do not place any objects on the telephone line cord. Do not locate the telephone where the line cord will be walked
on.
8.
Do not block or cover ventilation slots and openings in the bottom of the telephone. The openings should never
be blocked by placing the telephone on a bed, sofa, rug, or other similar surfaces. The telephone should never be
placed near or over a radiator or heat register. The telephone should never be placed in a built-in installation unless
proper ventilation is provided.
9.
Never spill liquid on the telephone or push objects of any kind through ventilation slots. Liquid or objects may
touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock.
10. Do not disassemble this product. Opening or removing covers may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electrical shock when the product is subsequently used.
11. Do not overload outlets and extension cords. Some telephones require AC power from an outlet. Overloading the
outlets can result in the risk of fire or electric shock.
12. Avoid using a telephone during a local thunderstorm. There may be a remote risk of electrical shock from lightning.
Fuse (F1) is rated at 0.75A/250V Time delay.
13. Do not use a telephone to report a gas leak in the vicinity of the leak.
14. Unplug the telephone from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
• When the line cord is frayed or plugs damaged.
• If liquid has been spilled into the telephone.
• If the telephone has been exposed to rain or water.
• If the telephone does not operate properly by following the operating instructions. (Adjust only those controls
covered by the operating instructions. Improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to normal operation.)
• If the telephone has been dropped or the housing damaged.
• If the telephone exhibits distinct change in performance.
CAUTION - Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment.
SAVE THESE INSTRUCTIONS
5
Telephone Part Identification
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Menu Button
7-10-11 Button
Directory Button
Save Button
Message Lamp
Multi-Angle LCD
Delete Button
Contrast Button
Dial Button
Voice Mail Button
2.5 mm Headset Jack
Review Up/Down Button
Directory/Logo Strip
Shift Button
Memory Buttons
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
6
RJ-9 Headset Jack
Redial Button
Headset Button
Flash Button
Mute Button
Hold Button
Release Button
Speaker Button
Pause Button
Edit Button
Volume Up/Down Button
Handset Jack
Speaker
Handset Hook
Hookswitch
INSTALLATION
DESK MOUNT
1.
2.
3.
4.
5.
Select the desired viewing angle and install the desk stand. The desk stand can be installed in two positions to
give a choice of viewing angle.
Connect the power adapter. The power adapter connects to the jack marked DC 9V on the bottom of the phone.
Plug the large part of the adapter into the wall outlet. Use only a 9V DC. 200mA or 300mA, center positive Class
2 adapter.
Connect the line cord. The line cord conncects to the jack marked LINE on the bottom of the phone..
Plug the coiled cord into the handset jack, and then plug the other end of the cord into the base.
Place the handset on the base.
WALL MOUNT
1.
2.
3.
4.
5.
Remove the desk stand. The unit will then mount directly on a standard wall telephone jack.
Connect the power adapter and the line cord. See Steps 2 and 3 above.
Rotate the handset hook into the wall mount position.
Plug the coiled cord into the handset, and then plug the other end of the cord into the base.
Place the handset on the base.
ANSWERING MACHINE
1.
2.
3.
Connect the LINE jack of the answering machine to the wall telephone jack.
Connect the LINE jack of the model 2700 phone unit to the PHONE jack of the answering machine.
Set the answering machine to answer after 2 or more rings.
MESSAGE WAITING LAMP
If your phone is installed behind a Message Waiting enabled PBX, you will need to set the M/W switch in order to receive Message Waiting indication.
1.
2.
Locate the switch on the bottom of the telephone.
For 90V PBX Message Waiting Indication, move the switch to the position marked “90V”. For 24V PBX Message
Waiting Indication, move the switch to the position marked “24V”. If connecting directly to telephone lines, move
the switch to the center “OFF” position.
Warning: Setting this switch in a position other than OFF can cause this phone to function incorrectly. When enabled, this feature is for PBX systems, and not meant for direct Central Office (CO) interface. If connecting to CO
telephone lines, make sure this switch is set to OFF.
Please note that the settings of your message waiting service such as the PIN are not controlled by the 2700. For
information about your PIN or to make changes to your message waiting service, contact your telephone service provider for instructions.
7
UNIT SETUP
FACTORY PRESETS
The following table shows the default factory settings:
Language
English
Stutter Tone
Yes
Area Code
No Setting
LDS Code
1
Access Code
No Setting
Time and Date
No Setting
Flash Time
600 mS
Ringer Cadence
3
Ringer Volume
5
Voicemail Number
No Setting
Number of 3 Sec Pauses
No Setting
Voicemail Password
No Setting
Hold Mode
NORMAL
Release Mode
NEW CALL
SDT Time
1700 mS
ENABLE KEY TONE
NO
Note: After the unit has been completely configured for the first time, use MENU to review or reprogram the features.
After the adapter is connected, the display will show as indicated below for setting.
1. [SELECT LANGUAGE] appears on the display. Press REVIEW UP to select the language. ENG - English, ESP Spanish, FRE - French, and then press MENU to confirm the selection.
2. When [STUTTER TONE] appears, the default setting is “YES”. To toggle stutter tone, press 1 for Yes or 2 for No.
Press MENU to confirm selection.
3. When [ENTER AREA CODE] appears, enter the desired area code using the keypad. Use REVIEW UP and REVIEW DOWN to skip a digit. Press MENU to confirm area code. Follow the same procedure for both area code
settings. To leave an area code blank, press MENU without entering digits.
4. When [SET LDS CODE] appears, enter the desired LDS code using the
keypad. This is the code which is dialed for a Long Distance Call. In North America, this code is “1.” Press MENU to confirm the selection.
5 When [SET ACCESS CODE] appears, enter the desired Access code using the keypad. This is the code that is
dialed to access an outside line. Press MENU to confirm the selection.
6. When [EDIT TIME & DATE] appears, enter the time using the keypad. If the time is AM, press REVIEW UP since
this is the default value. If the time is PM, press REVIEW DOWN and then press REVIEW UP. Press MENU to
confirm the ettings.
Example: To enter 8:35 AM, enter 0835 and then press REVIEW UP to skip to the
date because the time is AM by default.
7. When [FLASH TIMER (MS)] appears, press REVIEW UP to toggle between 600ms, 100 ms, and 300ms. After
selecting the desired flash time, press MENU to confirm selection.
8. When [RINGER CADENCE] appears, the default setting is 3. To alter this setting, press REVIEW UP. There are
10 ringer cadences and each one will be played as you scroll through them. After the desired ringer cadence is
displayed, press MENU to confirm selection.
9. When [RINGER VOLUME] appears, the default setting is 5. To alter the ringer volume, press REVIEW UP.
There are 7 ringer volume levels and each one will be played as you scroll through them. To turn the ringer off,
select [OFF] in the Menu. After the desired ringer volume level is displayed, press MENU to confirm selection.
10. When [VOICEMAIL NUMBER] appears, enter the voicemail number (maximum of 18 digits) using the keypad. To
delete a number or digit, press REVIEW DOWN to erase the number(s). After the desired number has been
entered, press MENU to confirm selection.
11. When [#3 SEC PAUSES] appears, enter the desired number of pauses using the keypad. After the desired setting
has been entered, press MENU to confirm selection.
12. When [VM PASSWORD] appears, enter the desired password using the keypad
(maximum of 5 digits). To
delete a number or digit, press REVIEW DOWN to erase the number(s). After the desired number has been entered, press MENU to confirm selection.
8
13. When [HOLD MODE] appears on the display. Press REVIEW UP to select either NORMAL or PBX. In NORMAL
mode, the HOLD button activates a local hold function. This can be released at any parallel phone. In PBX mode,
the HOLD button dials a code which places a PBX line on hold. If you select PBX mode, see Step 15 to program
the code.
14. When [RELEASE MODE] appears on the display. Press REVIEW UP to select either NEWCALL or HANGUP. In
NEWCALL mode, the RELEASE button provides a 1.5 second line break. This will ensure that the line is clear and
a new call can be dialed. In HANGUP mode, the RELEASE button drops the line and a new connection is not made.
This is primarily intended for programming into speed dial locations.
15. When [SDT TIME] appears on the display, press REVIEW UP to change Stutter Dial Tone timing. Please note
that the default setting of 1700 mSec is correct for most applications.
16. When [ENABLE KEY TONE] appears, use 1 to activate this feature or 2 to deactivate it. When this feature is activated, a tone will sound in the receiver or the speaker when a key is pressed.
17. This only applies if you have selected PBX HOLD mode.
a. Press SAVE. The display shows [SAVE TO ?]
b. Press HOLD. The display shows [ENTER NUMBER >]
c. Dial the code using the keypad.
d. Press SAVE.
TELEPHONE FEATURES
DIALING
The 2700 is only capable of DTMF dialing. It is not capable of pulse dialing.
RECEIVING A PHONE CALL
1.
2.
When the phone rings, lift the handset or press SPEAKER to begin your conversation.
To change the Ringer Volume, refer to the “Factory Presets” section.
PLACING A PHONE CALL
1.
2.
Lift the handset or press the SPEAKER button and wait for a dial tone.
Dial the telephone number you wish to call. The number will appear on the display window.
PREDIAL
1.
2.
While the handset is on hook, enter the desired telephone number using the key pad. The number will appear in
the display. To delete a digit or the entire number, press REVIEW DOWN.
To dial the displayed number, lift the handset, press SPEAKER or DIAL.
SPEAKER BUTTON
NOTE: Power Adapter must be used to ensure proper function
1.
Receiving Incoming Calls
a. When the phone rings, press and release SPEAKER and speak normally into the built-in microphone from a distance of 5-6
inches.
b. You can adjust the volume of the caller’s voice by by pressing the Volume Button on the base of the telephone.
c. After the conversation has finished, press and release SPEAKER to hang up.
2. Making A Call
a. Press and release SPEAKER.
b. When you hear a dial tone, dial the number or press the auto memory
button. The number will appear on the display window.
c. When your party answers, adjust the volume of the conversation by pressing the Volume Button on the base of the telephone.
d. After the conversation has finished, press and release SPEAKER to hang up.
Note:
1. If you wish to switch from speakerphone to handset, simply lift the handset.
2. If you wish to switch from handset to speakerphone, press and release SPEAKER and then hang up the handset.
DURATION COUNTER
A built-in counter will start counting 6 seconds after you lift the handset or 6 seconds after you dial a telephone number.
MUTE BUTTON
Press MUTE to speak without the person on the phone hearing your conversation. The MUTE Indicator will light up
and remain lighted until you resume your conversation. Also, “MIC MUTED” will show in the display. To resume the
conversation, press MUTE. The MUTE indicator will go out and your call can continue.
9
AUTOMATIC MEMORY
Storing A Number
1.
2.
3.
4.
5.
6.
7.
Press SAVE, [SAVE TO?] appears on the display window.
Press the desired memory location. (M1-M5 or SHIFT M1-M5)
[ENTER NUMBER>] appears on the display.
Enter the desired number using the keypad (maximum of 24 digits). Press SAVE to confirm.
[ENTER NAME>] will appear. Type the name (16 characters max.) using the keypad. Use REVIEW UP to add a
space. Use REVIEW DOWN to delete a character. Press SAVE again.
[SET VIP RING] will appear. Use REVIEW UP and REVIEW DOWN to select the desired ring cadence. Press
SAVE again.
[MEMORY STORING] will show briefly.
Dialing A Number
1.
2.
3.
Press the desired memory location (M1-M5 or SHIFT M1-M5)
The number will be displayed.
To dial the number, lift the handset, press SPEAKER or press DIAL.
VOLUME BUTTON
A built-in amplifier feature allows you to change the listening volume in the receiver of the handset when speaking
with your party. Press VOLUME UP or VOLUME DOWN to achieve different levels. The volume remains the same
between calls. It does not return to a nominal level.
REDIAL BUTTON
1.
2.
3.
To redial one of the last 10 numbers dialed, press REDIAL. The display will show the last number dialed. To
scroll through the last 10 numbers, press REVIEW UP or REVIEW DOWN.
After the desired number is selected, dial the number by pressing REDIAL again, lifting the handset, pressing
SPEAKER or pressing DIAL.
The selected number (32 digits maximum) will be redialed.
PAUSE BUTTON
PAUSE allows you to insert a 3.6-second pause in the dialing sequence. This is particularly useful if you are connected
to a PABX system where you must dial an access code (usually the number 9) to obtain an outside line.
1. Press PAUSE and release at any point in the dialing sequence where a pause is desired.
2. PAUSE can be pressed more than once to create a longer pause.
HOLD BUTTON
1. NORMAL MODE
a.
b.
Press HOLD and hang up the handset. HOLD will light up and remain lighted until you resume your conversation.
To resume your conversation, lift the handset or that of any extension phone on the same line or press and release SPEAKER. The HOLD indicator will go out and your call can continue.
2. PBX MODE
Press HOLD. The phone will dial out the code. Depending on the PBX, it may now be necessary to hang up the handset. Note that HOLD will not light in this mode.
FLASH BUTTON
This telephone provides a line break signal for accessing PABX service or for use of Call Waiting from your local telephone company. If you have Call Waiting service, you can use the Call Waiting function per the following instructions.
1.
2.
3.
While having a conversation, another party calls and you hear a tone.
Press FLASH once and release. The first conversation is placed on hold and the second call can be answered.
Press FLASH again and release. You may speak to the first caller again and the second call is placed on hold.
HEADSET BUTTON
This telephone will accept either a 2.5 mm cell phone-style headset or an RJ type headset. Use HEADSET to connect
and disconnect from calls.
DATA PORT
This is a connection which is in parallel with the telephone line. It allows the connection of a device such as a modem,
caller ID, or an answering machine. This connection is located on the bottom of the phone and is marked DATA.
10
CONTRAST BUTTON
Contrast can be altered whether on hook or off hook by pressing CONTRAST. There are 3 contrast levels.
RELEASE BUTTON
To end a conversation, press RELEASE once. There are two modes for RELEASE.
1. NEW CALL
In NEW CALL mode, the phone goes on-hook for 1.5 seconds and then goes off hook again. This allows you to make
another call.
2.HANG-UP
In HANG UP mode, the phone does not come back off hook. This allows you to program a RELEASE into a speed dial
location.
VOICEMAIL BUTTON
Press VOICEMAIL to dial the voicemail access number and pin.
See Unit Setup section for details.
DIRECTORY BUTTON
DIRECTORY is used to store the name and number of up to 99 of your most frequently dialed contacts. The names
are sorted alphabetically.
MESSAGE LIGHT
If you have a voice mail service with your telephone company, the large indicator at the top of the display will flash
red to alert you that you have new messages.
The MESSAGE indicator also monitors the unit’s situation. When the phone is in use, the MESSAGE indicator will be on continuously.
MESSAGE WAITING
This unit’s MESSAGE WAITING DETECTION is for both FSK and Stutter Dial Tone (SDT) systems.
1.FSK
The MESSAGE indicator will flash and [MESSAGE WAITING] will appear on the display for 20 seconds when a message waiting signal is received from the Central Office.
2.SDT
This unit will check your line for a stutter dial tone every time you hang up or each time a call goes unanswered. The
MESSAGE indicator will flash if a stutter dial tone is detected. There may be some delay in lighting the MESSAGE
indicator. This delay is due to regulatory matters and does not indicate a problem with the unit.
This unit may not be activated or deactivated under certain conditions. For example, when you retrieve messages from an outside phone
(not your own telephone number), the MESSAGE indicator may not be canceled when you return home. If you experience this situation,
pick up the handset and hang up. The MESSAGE indicator will cancel.
KEY TONE
If this feature is activated, a tone will sound in the receiver or speaker when a key other than the number keys is
pressed.
CALLER ID FEATURES
CALL WAITING DISPLAY
Call-waiting service alerts you to a new call by playing a tone while you are on a call. Call Waiting Caller ID not only
tells you there is another call waiting, but lets you know who the caller is before the call is answered. The name and
number of the incoming call will be shown on the unit’s display. This infomation will remain displayed for 16 seconds.
In addition to this, the CALL WAITING symbol (CW) will flash.
RECEIVING CALLS
1.
2.
When the telephone is not in use and a new call is received, the display will show the NEW symbol, the phone
number, the caller’s name, and the call time for 20 seconds. The REPEAT symbol will appear if the call has come in
more than once.
After 20 seconds with no activity, the display will default to the Stand-By screen until another call is received or a
button is pressed.
11
REVIEWING CALLS
1.
2.
3.
4.
When in Standby Mode, press REVIEW UP or REVIEW DOWN to see the stored calls. This unit stores up to 99
calls.
The NEW symbol will be removed from each call after it is reviewed.
The reviewed number can be stored into any of the auto memory buttons:
a. With the number displayed, press SAVE.
b. [SAVE TO ?] will appear. Press M1-M5 or SHIFT M1-M5. Press SAVE again.
c. The caller’s name will appear. Press SAVE again.
d. [SET VIP RING] will appear. Use REVIEW UP and REVIEW DOWN
to select the desired ring cadence. Press SAVE
again.
When the end of the call records is reached, the display will show [-END OF LIST- ].
DELETING CALLS
Individual call
1. Display the desired record by pressing REVIEW UP or REVIEW DOWN
2. Press DELETE. The display will show [DELETE? 1:YES 2:NO].
3. Press 1 to confirm the deletion.
All calls
1. Display the desired record by pressing REVIEW UP or REVIEW DOWN
2. Press and hold DELETE for more than 3 seconds. The display will show [DELETE ALL 1:YES 2:NO].
3. Press 1 to confirm the deletion.
CALLBACK
When reviewing received calls, there are two ways to dial the telephone numbers shown on the display by pressing
DIAL.
1.
2.
If you have reviewed the calls with the telephone handset on hook, press DIAL. The HANDSET symbol in the
display will come on, and the number you have selected will be dialed automatically via the speakerphone.
If you have already picked up the handset or activated the speakerphone, you may select the number to be dialed by reviewing the stored calls. After locating the desired number, press DIAL. The displayed number will be
dialed automatically.
7-10-11 BUTTON
7-10-11 allows you to change the format of the displayed number. These are the available formats:
7-digit 10-digit 11-digit 7-digit telephone number.
3-digit area code + 7-digit telephone number.
long distance code 1 + 3-digit area code + 7digit telephone number.
If a local call, and its 7-digit number is displayed:
• Pressing 7-10-11 once will change it to a 10-digit format (your area code + 7-digit number).
• Pressing 7-10-11 twice will change it to an 11-digit number (1 + your area code + 7-digit telephone number).
• Pressing 7-10-11 three times will go back to the original 7-digit telephone number.
If a long distance call, and its 10-digit number is displayed,
• Pressing 7-10-11 once will remove the 3-digit area code and change it to a digit number.
• Pressing 7-10-11 twice will go back to the original 10-digit number.
• Pressing 7-10-11 three times will add the LDS code to the number. (1+ 3-digit area code + 7-digit telephone
number).
When the desired format of the telephone number is reached, press DIAL to dial the displayed number.
MESSAGE ERROR
The display shows [-MESSAGE ERROR-]” if your unit receives a call that has an error in the transmission or reception.
NO DATA SENT
The display shows [-NO DATA SENT-] if there is no caller ID (CID) number sent from the telephone company.
PRIVATE CALLS
•
•
If the caller has exercised the option to block his number from being sent, [PRIVATE NUMBER] and his name will
alternately display on the screen.
If the caller has exercised the option to block his name from being sent, [PRIVATE NAME] and his telephone number will be displayed on the screen.
12
•
If the caller has exercised the option to block his name and number from being sent, [PRIVATE CALLER] will be
displayed on the screen.
UNKNOWN CALLS
•
•
•
When the telephone company is unable to provide the caller’s telephone number, [UNKNOWN CALLER] and his
name will alternately display on the screen.
When the telephone company is unable to provide the caller’s name, [UNKNOWN NAME] and his telephone number will be displayed on the screen.
When the telephone company is unable to provide the caller’s name and number, [UNKNOWN CALLER] will be displayed on the screen.
USING THE DIRECTORY
This unit stores the numbers of up to 99 of your business associates, clients, contacts, and friends in your directory.
Names are sorted alphabetically starting with the first character. (If you want your Directory sorted by the last name,
enter the last name first.)
STORING ENTRIES
Press SAVE to store a number in the Directory. After pressing SAVE, the display will show [Save To?]. Press DIRECTORY. [Enter Number>] will appear in the display. Enter the desired number using the keypad. (max 24 digits).
Press SAVE to confirm. [Enter Name] will appear. Type the name using the keypad. Press SAVE again to confirm all
settings. [Number Stored] will show briefly.
Note: For Example, if A is the desired letter, press the #2 button once and A will appear on the display. If B is the
desired letter, press the #2 button twice and B will appear on the display. Pressing the #2 button three times will select the letter C. If an incorrect letter is accidentally selected, press the down review arrow and start over. All letters
are upper case. To enter a space when storing a name or number, press the up review arrow. Use the “#” key to edit
entries.
FINDING ITEMS
Press DIRECTORY to enter the Directory Review Mode. The first entry in the Directory is displayed. The Down and
Up Review Arrows may be used to scroll through the directory. To leave the directory at any time, press DIRECTORY.
To search for a directory entry, press DIRECTORY. Then, using the keypad, type the desired name.
DIALING DIRECTORY NUMBERS
Find the number you want to dial in the Directory List. (Telephone can be on or off hook) When the number shows on
the display, press DIAL to start dialing.
DELETING ITEMS
Deleting Individual Entries
Enter the directory and select the individual entry. To delete an individual entry, press DELETE once and then press
1 to confirm or 2 to cancel. The display will be erased and the remaining items will be re-sorted.
Deleting All Entries
Enter the directory. To delete all entries, press and hold DELETE button. [DELETE ALL] will appear in the display,
select (1) for YES or (2) for NO. [NO RECORDS] appears in the display confirming there are no directory entries in
memory.
13
TELEPHONE SERVICE PROBLEMS
If you have any problems with your telephone service, determine if the problem is with your unit or the
telephone company lines BEFORE CALLING THE TELEPHONE COMPANY. Be aware that the telephone company may
charge you for a service call if the problem is caused by your telephone.
PHONE DOES NOT RING
1.
2.
3.
Line cord is disconnected at telephone outlet or at telephone.
Phone is OFF HOOK. Make certain the hookswitch is depressed when the handset is in the cradle.
SPEAKERPHONE indicator is on. Turn off speakerphone.
NO DIAL TONE
Wire is disconnected at telephone or at wall jack. Test the telephone in a different wall jack. If it works, the first jack
may be defective.
REDIAL BUTTON DOES NOT FUNCTION
The telephone may have been momentarily disconnected from the telephone jack.
BLANK SCREEN
1.
2.
Check if the adapter is connected properly.
Press the Contrast button to see if contrast level is set correctly.
CALLERS ARE NOT DISPLAYED ON THE SCREEN
1.
2.
Verify that you have subscribed to the appropriate service (Caller ID and Call Waiting Caller ID) from your telephone company. If you only subscribed to Caller ID service the unit will not display call waiting caller ID information.
Check if your answering machine is set to answer before 2 rings.
NO CALLER INFORMATION IS DISPLAYED WHEN HEARING THE CALL WAITING BEEP
Verify that you have subscribed to Call Waiting Caller ID service.
MESSAGE ERROR HAPPENS FREQUENTLY
Caller information was not transmitted properly. Check with your telephone company to see if there is a problem with
your phone line.
Since call records will be retained even with the power adapter disconnected, please disconnect all the telephone cords
and power adapter; and then reinstall the telephone step by step per this instruction manual before asking for service.
MAINTENANCE INFORMATION
Treat your telephone equipment with care for trouble-free performance. Avoid dropping the handset. Carefully
place the handset on-hook after use.
Avoid putting near heating appliances and devices that generate electrical noise (for example, motors and florescent
lamps).
Clean your telephone equipment with a damp cloth. Stains may be removed with a mild soap. Do not use liquid
or aerosol detergents or cleaning agents.
Do not expose to direct sunlight or moisture
Retain the original package in case you need to ship it at a later date.
14
TELEPHONE REPAIR
DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF. Telephones manufactured by CORTELCO must be
returned to us for repair.
You can return your telephone to CORTELCO for repair or replacement in
accordance with our LIMITED WARRANTY.
CORTELCO warrants THIS PRODUCT against defects in material and workmanship in accordance with our LIMITED
WARRANTY. If your telephone is returned for repair, include a copy of your sales receipt containing the date-of-purchase. DO NOT INCLUDE THE ORIGINAL SALES RECEIPT.
If date-of-purchase is not included, the factory date printed on the label on the bottom of your telephone
used as the date-of-purchase. The factory date allows six months for distribution and sale of this product.
will be
If you return your telephone for repair, the warranty period is not extended. The original date-of-purchase continues to apply to your warranty.
OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after the LIMITED WARRANTY has
expired if you send it to us in a complete and undamaged condition. The repaired unit will be shipped to you C.O.D.,
freight collect.
RETURN-FOR-REPAIR PACKAGING If you are returning a unit to us for repair, package it carefully, preferably in
the original carton. Be sure to include your return address, a copy of the sales receipt showing date-of-purchase, and
a note describing the problem you have with your Telephone. Shipping must be prepaid. If the telephone is in warranty, it will be repaired or replaced, at our option, at no cost to you, and it will be returned shipping prepaid.
Ship your telephone (shipping prepaid) to:
CORTELCO
REPAIR CENTER
1703 SAWYER ROAD
CORINTH, MS 38834
FCC Information
Part 68 is a Federal regulation which requires equipment to be tested and registered with the FCC prior to its connection to the network. This equipment complies with Part 68 of FCC rules. On the bottom of the telephone is a label
that contains, among other information, the FCC Registration Number and the Ringer Equivalence Number (REN) for
this equipment. You must, upon request, provide this information to your telephone company.
The Ringer Equivalence Number(REN), which is used to determine the number of devices you may connect to your
phone line, indicates the amount of power that your telephone draws from the telephone company line during ringing.
If you have more than one telephone (or other terminal device) connected to the telephone company line, you should
total the RENs, and be sure that the total is not more than five. Your telephones may not ring if the total is more than
five. Also, in some rural locations, your telephone may not ring if the REN total is more than three.
RESTRICTIONS You must not connect your telephone to coin-operated lines or party lines.
INSTALLATION This model telephone must be connected to the telephone company lines through a modular jack.
The required USOC for the modular jack is RJ11C for desk mounting and RJ11W for wall mounting. The USOC number
is printed on the label on the bottom of your telephone.
HEARING-AID COMPATIBILITY The handset on your telephone will work with magnetically-coupled hearing aids.
You can use a hearing aid equipped with a T (Telephone) switch.
IN CASE OF TROUBLE If your telephone should cause problems on the telephone line, the telephone company can
temporarily disconnect your service. The telephone company must then notify and allow you to correct the problem.
The telephone company may from time to time change its lines or equipment. They must notify you if planned changes will affect your telephone service, to allow you to take steps to prevent interruptions.
This telephone complies with Part 15 of the FCC Rules. In the unlikely event that interference occurs, move the telephone and/or radio, television, etc. to increase the separation distance.
15
Limited Warranty
If you purchased this product new in the U.S. or Puerto Rico, CORTELCO warrants it against defects in material and workmanship for
a period of five (5) years from the date of original purchase. This warranty is in lieu of all other express warranties. During the warranty
period, CORTELCO agrees to repair or, at its option, replace the defective product, or any part of it without charge for parts or labor.
This is your exclusive remedy. This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or
operation, lack of reasonable care, the affixing of any attachment not provided by CORTELCO with the product and loss of parts.
The warranty is voided in the event any unauthorized person alters or repairs the unit.
Telephone companies use different types of equipment and offer various types of services to customers. CORTELCO does not warrant
that this product is compatible with the type of equipment of any particular phone company or the services provided by it.
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AS OF THE DATE FIVE YEARS FROM THE ORIGINAL PURCHASE OF THE
PRODUCT. CORTELCO ASSUMES NO RESPONSIBILITY FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSION AND LIMITATION
MAY NOT APPLY TO YOU.
If failure occurs and your telephone is in warranty, service shall be provided by returning it to CORTELCO - Repair Center, 1703
Sawyer Road, Corinth, Mississippi 38834, shipping prepaid. The product will be repaired or replaced if examination by us determines the product to be defective. Telephones received damaged as a result of shipping will require you to file a claim with the carrier.
2700 - Manual Rev. 1.4a
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement