Toshiba MD14F11 Television User Guide

Toshiba MD14F11 Television User Guide
Introduction
2
DIGITAL VIDEO
COMBINATION FLAT COLOR
TELEVISION AND DVD VIDEO
PLAYER
Connections
Basic setup
TV operation
MD14F11
Basic playback
OWNER’S MANUAL
Advanced playback
Function setup
Others
©2005 Toshiba Corporation
Before operating the unit, please read this manual thoroughly.
5S00201A [E] (Cover)
1
4/1/05, 3:15 PM
13
18
20
28
31
38
44
Introduction
IMPORTANT SAFEGUARDS
IM
Dear Customer,
Child Safety
Thank you for purchasing this Toshiba TV. This manual will
help you use the many exciting features of your new TV.
Before operating the TV, please read this manual
completely, and keep it nearby for future reference.
It Makes A Difference
Where Your TV Stands
Safety Precautions
WARNING
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The Issue
If you are like most consumers, you have a TV in your
home. Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing
CAUTION
trend, and larger TVs are popular purchases; however,
they are not always supported on the proper TV stands.
Sometimes TVs are improperly secured or
inappropriately situated on dressers, bookcases, shelves,
desks, audio speakers, chests, or carts. As a result, TVs
may fall over, causing unnecessary injury.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Toshiba Cares!
The consumer electronics industry
The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
is committed to making home
entertainment enjoyable and safe.
The Consumer Electronics
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
children’s safety and educate
consumers and their families about
television safety.
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
CAUTION: To reduce the risk of electric shock, do
not use the polarized plug with an extension
cord, receptacle, or other outlet unless the
blades can be inserted completely to prevent
blade exposure.
Tune Into Safety
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer’s
attention to Article 820-40 of the NEC, which provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical. For additional antenna
grounding information, see items 25 and 26 on page 4.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
If a fixed (non-moving) pattern remains on the TV
screen for long periods of time, the image can
become permanently ingrained in the picture tube.
This type of damage is NOT COVERED BY YOUR
WARRANTY. See item 33 on page 4.
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES ®
2
5S00201A [E] (P02-05)
One size does NOT fit all! Use appropriate
furniture large enough to support the weight of your
TV (and other electronic components).
Use appropriate angle braces, straps, and anchors to
secure your furniture to the wall (but never screw
anything directly into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
Do not allow children to climb on or play with
furniture and TVs.
Avoid placing any item on top of your TV (such as a
VCR, remote control, or toy) that a curious child may
reach for.
Remember that children can become excited while
watching a program and can potentially push or pull
a TV over.
Share our safety message about this hidden hazard
of the home with your family and friends. Thank you!
0303
2
4/1/05, 3:15 PM
IMPORTANT SAFEGUARDS
Installation, Care, and Service
Important Safety Instructions
Installation
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Follow these recommendations and precautions and heed
all warnings when installing your TV:
5) Do not use this apparatus near
water.
16) Never modify this equipment. Changes or
modifications may void: a) the warranty, and b) the
user’s authority to operate this equipment under the
rules of the Federal Communications Commission.
6) Clean only with a dry cloth.
17)
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus
(including amplifiers) that produce heat.
19) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
20) Never place items such as vases,
aquariums, or candles on top of the TV.
11) Only use attachments/accessories specified by
the manufacturer.
21) Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during
lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the apparatus
QUALIFIED
has been exposed to rain or moisture, does
SERVICE
TECHNICIAN
not operate normally, or has been dropped.
5S00201A [E] (P02-05)
CAUTION: To reduce the risk of electric
shock, do not use the polarized plug
with an extension cord, receptacle, or other
outlet unless the blades can be inserted
completely to prevent blade exposure.
3
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
18) Never place or store the TV in direct
sunlight; hot, humid areas; areas
subject to excessive dust or vibration;
or locations with temperatures at or
below 41°F (5°C).
9) Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third
Wide plug
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
15)
Introduction
1)
2)
3)
4)
22) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
23) Never overload wall outlets and
extension cords.
0303
3
4/1/05, 3:15 PM
Introduction
IMPORTANT SAFEGUARDS
S
30) [This item applies to projection TVs only.] If the air
temperature rises suddenly (for example, when the TV
is first delivered), condensation may form on the
lenses. This can make the picture appear distorted or
the color appear faded. If this happens, turn off the TV
for 6 to 7 hours to allow the condensation to evaporate.
24) Always operate this equipment from
a 120V AC, 60 Hz power source only.
25) Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges (see Section
810 of the National Electric Code).
31) For added protection of your TV from lightning and
power surges, always unplug the power cord and
disconnect the antenna from the TV if you leave the TV
unattended or unused for long periods of time.
Antenna lead-in wire
Ground clamp
Grounding conductors
(NEC Section 810-21)
Electric service equipment
Power service grounding
electrode system (NEC Art 250 Part H)
Ground clamps
26)
32) During normal use, the TV may make
occasional snapping or popping
sounds. This is normal, especially
when the unit is being turned on or
off. If these sounds become frequent
or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
Antenna discharge unit
(NEC Section 810-20)
33) Possible Adverse Effects on TV Picture Tube: If a
fixed (non-moving) pattern remains on the TV screen
for long periods of time, the image can become
permanently ingrained in the picture tube and cause
subtle but permanent ghost images. This type of
damage is NOT COVERED BY YOUR WARRANTY.
Never leave your TV on for long periods of time while it
is displaying the following formats or images:
DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
• Use extreme care to make sure you
are never in a position where your body (or any item
you are in contact with, such as a ladder or
screwdriver) can accidentally touch overhead power
lines. Never locate the antenna near overhead power
lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
• Fixed Images, such as PIP/POP windows, stock
tickers, video game patterns, TV station logos, closed
captions, and websites.
• Special Formats that do not use the entire screen.
For example, viewing letterbox style (16:9) media on a
normal (4:3) display (gray bars at top and bottom of
screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right
sides of screen).
Care
Service
For better performance and safer operation of your
TOSHIBA TV, follow these recommendations and
precautions:
34)
27) Always sit approximately 10–25 feet away from the TV
and as directly in front of it as possible. The picture can
appear dull if you sit too far to the left or right of the
TV, or if sunlight or room lights reflect on the screen.
Turn the TV off to check for reflections on the screen,
and then remove the source of reflections while
viewing the TV.
WARNING: RISK OF ELECTRIC
SHOCK! Never attempt to service the
TV yourself. Opening and
removing the covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to a
Toshiba Authorized Service Center.
QUALIFIED
SERVICE
TECHNICIAN
35) If you have the TV serviced:
• Ask the service technician to use only replacement
parts specified by the manufacturer.
28) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
29)
36) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the
TV. Improper disposal may result in a picture tube
implosion and possible personal injury.
WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any
kind into the TV cabinet slots.
0303
4
5S00201A [E] (P02-05)
• Upon completion of service, ask
the service technician to perform
routine safety checks to determine
that the TV is in safe operating
condition.
4
4/1/05, 3:15 PM
SAFETY PRECAUTION/ Power source
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
Introduction
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the
FCC (Federal Communications Commission) Rules could void the user's authority to operate this
equipment.
COPYRIGHT: It is permissible to record television programs, films, video tapes and other material only in the event
that third party copyrights and other rights are not violated.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
Location of the required Marking
The rating sheet and the safety caution
are on the rear of the unit.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ
THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT
TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION
MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO
NOT STARE INTO BEAM.
CERTIFICATION: COMPLIES WITH
FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
WARNING: This product contains a laser beam. Do not attempt to stare at the beam through the DVD disc tray
or the ventilation openings. Staring directly at the beam may cause permanent damage to your
eyesight.
IMPORTANT RECYCLING INFORMATION
This product uses both Cathode Ray Tube (CRT) and other components that contain lead. In your
community there might be regulations that require you to dispose these materials
properly under environmental considerations. Please contact your local authorities, or the Electronic
Industries Alliance (http://www.eiae.org) for disposal or recycling information.
Power source
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
5S00201A [E] (P02-05)
5
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC
cord plug into a standard 120V 60Hz polarized AC outlet.
Notes:
• Never connect the AC line cord plug to other than the specified voltage (120V
60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not
attempt to file or cut the blade. It is the user’s responsibility to have an
electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the unit fails to
function, simply unplug the unit from the AC outlet and plug it back in. The
unit should return to normal operation.
• If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds
before pressing the POWER button.
4/1/05, 3:15 PM
5
Introduction
Precautions
Notes on handling
3 When shipping the unit, the original shipping carton
and packing materials come in handy. For maximum
protection, repack the unit as it was originally packed
at the factory.
3 Do not use volatile liquids, such as insect spray, near
the unit. Do not leave rubber or plastic products to
contact the unit for prolonged period. They will leave
marks on the finish.
3 The top and rear panels of the unit may become
warm after a long period of use. This is not a
malfunction.
3 When the unit is not in use, be sure to remove the
disc and turn off the power.
3 If you do not use the unit for a long period, the unit
may not function properly in the future. Turn on and
use the unit occasionally.
Notes on locating
3 Place the unit on a level surface. Do not use it on a
shaky or unstable surface such as a wobbling table or
inclined stand. The loaded disc may become disaligned and damage the unit.
3 When you place this unit near a TV, radio, or VCR,
the playback picture may become poor and the sound
may be distorted. In this case, place the unit away
from the TV, radio or VCR.
Notes on moisture condensation
Moisture condensation damages the unit. Please
read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the optical pick-up lens
inside this unit, one of the most crucial internal parts of
the unit.
3 Moisture condensation occurs during the
following cases.
When you bring the unit directly from a cold place to
a warm place.
When you use the unit in a room where you just
turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
In summer, when you use the unit in a hot and humid
place just after you move the unit from an air
conditioned room.
When you use the unit in a humid place.
Notes on cleaning
Use a soft, dry cloth for cleaning.
Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the unit.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
3 Do not use the unit when moisture condensation
may occur.
If you use the unit in such a situation, it may damage
discs and internal parts. Remove the disc, connect
the power cord of the unit to the wall outlet, turn on
the unit, and leave it for two or three hours. After two
or three hours, the unit will have warmed up and
evaporated any moisture. Keep the unit connected to
the wall outlet and moisture condensation will seldom
occur.
Wa
it!
Wall outlet
6
5S00201A [E] (P06-07)
6
4/1/05, 3:15 PM
Notes on discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.
Introduction
On handling discs
DVD video disc
DVD video disc
Title 1
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Playback side
Do not attach paper or tape to discs.
Video CD/Audio CD
Video CD/Audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.
Notes on copyright
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
The unauthorized recording, use, distribution, or
revision of copyrighted materials including, without
limitation, television programs, videotapes, and DVDs,
is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil
and criminal liability.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
7
5S00201A [E] (P06-07)
7
4/1/05, 3:15 PM
Introduction
Notes on discs (continued)
About this owner’s manual
This owner’s manual explains the basic instructions of
this unit. Some DVD video discs are produced in a
manner that allows specific or limited operation during
playback. As such, the unit may not respond to all
operating commands. This is not a defect in the unit.
Refer to instruction notes of discs.
Playable discs
This unit can play the following discs.
Disc Mark
Contents
Disc
Size
Maximum
playback time
Approx. 4 hours
(single sided disc)
12 cm
“
” may appear on the TV screen during operation.
A“
” means that the operation is not permitted by the
unit or the disc.
For example, sometimes it is unable to stop the
playback of copyright message of the disc when the
STOP (3) button is pressed. Alternatively, the “
”
may also indicate that the feature is not available for the
disc.
Audio
+
Video
(moving
pictures)
DVD
video
discs
On Video CDs
Approx. 160 minutes
(double sided disc)
Video
CDs
DIGITAL VIDEO
Audio
+
Video
(moving
pictures)
Audio
CDs
This DVD supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.
• Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this DVD in the
same way as an audio CD.
• Video CD equipped with PBC function
(Version 2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.
8
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD
single)
Approx. 20 minutes
Audio
The following discs are also available.
DVD-R/RW discs of DVD video format
CD-R/CD-RW discs of CD-DA or Video CD format
• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-ROM,
Photo CD, etc., or non standardized discs even if they
may be labeled as above.
• Some CD-R/RWs can not be played back depending
on the recording conditions.
• This unit uses the NTSC color system, and cannot
play DVD video discs recorded in any other color
system (PAL, SECAM, etc.).
Because of problems and errors that can occur during the
creation of DVD software and/or the manufacture of DVD
discs, Toshiba cannot guarantee that this player will play
every feature of every DVD bearing the DVD logo. As one
of the creators of DVD technology, Toshiba DVD players
are manufactured using the highest standards of quality,
and as a result, such incompatibilities are rare. If you
happen to experience any difficulty playing a DVD on a
Toshiba DVD player, please feel free to call our Contact
listed in “How to Obtain Warranty Service” (see page 50).
8
5S00201A [E] (P08-12)
Approx. 80 minutes
(single sided disc)
8 cm
Notes on region numbers
The region number of this unit is 1. If region numbers,
which stand for their playable area, are printed on your
DVD video disc and you do not find 1 or ALL , disc
playback will not be allowed by the player. (In this case,
the unit will display a message on-screen.)
Approx. 8 hours
(double sided disc)
4/1/05, 3:15 PM
Contents
Advanced playback
IMPORTANT SAFEGUARDS ............................ 2
SAFETY PRECAUTIONS ................................. 5
Precautions ....................................................... 6
Notes on discs ................................................... 7
Contents ............................................................ 9
Identification of controls .................................. 10
Basic setup
Zooming ......................................................... 31
Locating desired scene .................................. 31
Marking desired scenes ................................. 32
Repeat playback............................................. 33
A-B Repeat playback...................................... 33
Program playback .......................................... 34
Random playback........................................... 34
Changing angles ............................................ 35
Title selection ................................................. 35
DVD menu ...................................................... 35
Changing soundtrack language ..................... 36
Subtitles ......................................................... 36
Disc status ...................................................... 37
To turn off the PBC ........................................ 37
Starting setup .................................................. 18
Setting the language ....................................... 19
Function setup
Connections
Antenna connections ....................................... 13
Cable TV connections ..................................... 14
Connecting to optional equipment ................... 15
TV operation
TV operation .................................................... 20
Closed captions ............................................... 22
To memorize channels .................................... 23
Setting the V-Chip ........................................... 24
Picture control adjustment ............................... 26
Adjusting the picture preference ..................... 26
Stereo and Second Audio Program (SAP) ...... 27
Basic playback
Introduction
Introduction
Customizing the function settings .................. 38
Temporary disabling of rating level
by DVD disc ................................................... 43
Others
Language code list ......................................... 44
Troubleshooting ............................................. 45
Reception disturbances .................................. 47
Specifications ................................................. 48
Limited United States Warranty ..................... 49
Playing a disc .................................................. 28
9
5S00201A [E] (P08-12)
9
4/1/05, 3:15 PM
Introduction
Identification of controls
See the page in
for details.
Front
POWER button 18
OPEN/CLOSE ( ) button 28
STOP (
AUDIO (L/R)/VIDEO IN jacks (LINE) 15
) button 28
Disc tray 28
SKIP (
/
) buttons 30
PLAY ( ) button 28
PHONES jack
Remote sensor 12
POWER indicator 20
CHANNEL ( / ) buttons 21
VOLUME ( / ) buttons 20
Rear
AC power cord
COAXIAL DIGITAL AUDIO OUT jack 16
RF IN jack 13
10
5S00201A [E] (P08-12)
10
4/1/05, 3:15 PM
21
The instructions in this manual describe the function on the remote control. See the page in
OPEN/CLOSE button
28
TV/DVD button
28
Direct channel
selection buttons (0-9)
Number buttons (0-9)
20
DISPLAY button
21
for details.
Introduction
Remote control
POWER button 18
SLEEP button 21
24
JUMP button 31
CH
/
buttons
21
VOL +/- buttons 20
SUBTITLE button
36
AUDIO SELECT button 27 36
INPUT button
ZOOM button
15
31
MUTE button 21
PLAY MODE button
33
DVD MENU button 35
ENTER button 18
Direction buttons (
/ / / )
18
MENU button
SETUP button
19
38
PLAY button
28
PAUSE button
29
STOP button 28
CH RTN button
21
30
CLOSED CAPTION button 22
button 30
SKIP
FF button 30
SKIP
button
CANCEL button 18
REV button
30
SLOW
button
ANGLE button
30
35
SLOW
TOP MENU button
35
GAME button 15
button 30
MARKER button 32
REPEAT A-B button 33
RETURN button 38
*DVD MENU button
Use the DVD MENU button to
display the menu included on
many DVD video discs.
To operate a menu, follow the
instructions in “DVD menu.” 35
11
5S00201A [E] (P08-12)
11
4/1/05, 3:15 PM
Introduction
Identification of controls (continued)
Inserting batteries
1
Open the battery compartment cover in the direction of
the arrow.
2
Install two “AAA” batteries
(supplied), paying attention to
the polarity diagram in the
battery compartment.
3
Replace the compartment
cover.
Operation
• Aim the remote control at the remote sensor and press control buttons to operate.
• Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5
meters.
Approx. 5 meters
Caution:
Never throw batteries into a fire.
Notes:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries
with new ones.
• When necessary to replace batteries in the remote control, always replace both batteries with new ones.
Never mix battery types or use new and used batteries in combination.
• Always remove batteries from remote control if they are dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from leaking into the battery compartment.
12
5S00201A [E] (P08-12)
12
4/1/05, 3:15 PM
Connections
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If
you are using a cable TV service (CABLE), see page 14 for Cable TV connections.
Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Antenna
jack
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
75 ohm coaxial cable
(not supplied)
Connections
Antenna
jack
300-75 ohm matching
transformer (supplied)
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Antenna
jack
300-75 ohm matching
transformer (supplied)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer. Attach the transformer to the combiner,
then attach the combiner to the antenna jack.
Combiner
(not supplied)
UHF 300 ohm
twin-lead wire
(not supplied)
VHF 300 ohm
twin-lead wire
(not supplied)
Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.
Antenna
jack
VHF 75 ohm
(not supplied)
Combiner
(not supplied)
UHF 300 ohm
twin-lead wire
(not supplied)
13
5S00201A [E] (P13-23)
13
4/1/05, 3:16 PM
Connections
Cable TV connections
This unit has an extended tuning range and can tune most cable channels without using a cable TV converter box.
Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for
normal viewing requires the use of a descrambler device which is generally provided by the cable company.
For subscribers to basic cable TV service
Antenna
jack
For basic cable service not requiring a converter/descrambler
box, connect the cable TV 75 ohm coaxial cable directly to the
Antenna jack on the back of the unit.
75 ohm
coaxial cable
For subscribers to scrambled cable TV service
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the antenna jack on the unit. Follow the connections shown
below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to select channels.
Incoming
75 ohm
cable TV
75 ohm cable
to the unit
Converter/
descrambler
Antenna
jack
For subscribers to unscrambled basic cable TV service with scrambled
premium channels
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the
cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”
position, you can directly tune any nonscrambled channels on your unit. With the switch in the “A” position, tune your
unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box
to tune scrambled channels.
Converter/
descrambler
Incoming
75 ohm
cable TV
Splitter
A/B switch
A
75 ohm cable
to the unit
B
14
5S00201A [E] (P13-23)
14
4/1/05, 3:16 PM
Antenna
jack
Connecting to optional equipment
You can enjoy VCR, camcorder or TV game with connection to external
input. To select the external input, press INPUT and select “LINE” mode.
INPUT
GAME
Connections
To connect the unit to a VCR
Press the INPUT to select the “LINE” (external input) to use the TV as a monitor.
Operate your VCR as usual.
VCR
Front of the unit
: Signal flow
VIDEO IN
AUDIO IN (R)
To Audio/Video OUT
AUDIO IN (L)
Audio/Video cable (not supplied)
To connect the unit to a camcorder
To playback from the camcorder, connect the camcorder to the unit as shown.
Front of the unit
Camcorder
: Signal flow
VIDEO IN
AUDIO IN (R)
To Audio/Video OUT
AUDIO IN (L)
Audio/Video cable (not supplied)
To connect the unit to a TV Game
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.
1. Connect a TV Game to the unit.
2. Press GAME. The GAME mode screen appears.
• This unit has the GAME mode function 21 .
: Signal flow
Front of the unit
VIDEO IN
AUDIO IN (R)
To Audio/Video OUT
AUDIO IN (L)
Audio/Video cable (not supplied)
Notes:
• You can also change the TV screen to LINE by pressing the CH / buttons.
• The unit can also be used as a display device for many video games. However, due to the wide variety of different types
of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the
suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
• The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs and other materials,
is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and/or
criminal liability.
15
5S00201A [E] (P13-23)
15
4/1/05, 3:16 PM
Connections
Connecting to optional equipment (continued)
You can enjoy high quality dynamic sounds by connecting the
unit to optional audio equipment.
* This section uses the following reference mark.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the
Dolby Digital recording system with this dynamic realistic sound by connecting the unit to a 6 channel amplifier equipped
with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the
full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from
titles with the Dolby Surround mark.
Amplifier equipped with a
Dolby Digital decoder
To COAXIAL
type digital
audio input
• Use DVD video discs
encoded via the Dolby
Digital recording system.
Manufactured under license
from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby Laboratories.
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right
and left front speakers, a center speaker, and one or two rear speakers).
3 With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.”
Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
3 With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
• This connection is only suitable for Video CDs and Audio CDs.
*
Amplifier equipped with
Dolby Surround Pro Logic
To COAXIAL
type digital
audio input
* Connect one or two rear speakers. The output sound from the
rear speakers will be monaural
even if you connect two rear
speakers.
75 Ω coaxial cable (not supplied)
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.
Amplifier equipped with
a DTS decoder
To COAXIAL
type digital
audio input
• Use DVD video discs
encoded via the Dolby
Digital recording system.
“DTS” and “DTS Digital Out”
are trademarks of Digital
Theater Systems, Inc.
75 Ω coaxial cable (not supplied)
16
5S00201A [E] (P13-23)
16
4/1/05, 3:16 PM
Connecting to an amplifier equipped with an MPEG2 audio decoder
Connections
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic
realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an
MPEG2 audio decoder
To COAXIAL
type digital
audio input
75 Ω coaxial cable (not supplied)
• Use DVD video discs
encoded via the Dolby
Digital recording system.
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
Amplifier equipped with a
Digital audio input
To COAXIAL
type digital
audio input
75 Ω coaxial cable (not supplied)
Notes:
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO
OUT jack of the unit.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the “COAXIAL” input of a Receiver or Processor.
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening
level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the unit’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
17
5S00201A [E] (P13-23)
17
4/1/05, 3:16 PM
Basic setup
POWER
Starting setup
The STARTING SETUP function makes installing your unit easily. It leads you
the Language selection, TV/CABLE selection and auto channel memory
automatically.
IMPORTANT: Make sure that the antenna or cable TV system connection
is made!
/
ENTER
CANCEL
Starting setup
1
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press
or
to select your desired
language, then press ENTER.
4
Now the “AUTO CH MEMORY” starts.
After the starting setup is completed, the TV
channel appears on the screen.
Note:
If you press CANCEL in the process of “AUTO CH
MEMORY” you can do starting setup function again.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
<
2
/
Press
or
to select “TV” or “CABLE”, then
press ENTER.
CHANNEL PLAN
TV
CABLE
<
3
AUTO CH MEMORY
STOP : CANCEL
/ ENTER>
/
Note:
The starting setup function will work only when you press
POWER for the first time.
/ ENTER>
Press
or
to select “START”, then press
ENTER.
If you select “CANCEL” and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
AUTO SETUP
START
CANCEL
<
/
/ ENTER>
18
5S00201A [E] (P13-23)
18
4/1/05, 3:16 PM
Setting the language
This unit can display the on screen language in English, Spanish or French.
Select the language you prefer first, then proceed with the other menu
options.
ENTER
/ / /
MENU
Setting the language
Press MENU, then press
option.
or
to select
Basic setup
1
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/MENU
2
Press
or
to select the desired language:
English (ENGLISH), Spanish (ESPAÑOL) or
French (FRANCAIS), then press ENTER.
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/
3
/ ENTER/MENU
Press MENU repeatedly until the menu screen
is cleared.
Notes:
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC
power cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu !& .
19
5S00201A [E] (P13-23)
19
4/1/05, 3:16 PM
TV operation
POWER
0–9
TV operation
VOL +/–
TV operation
1
2
4
To turn on the unit, press POWER.
The Power indicator will light.
Adjust the volume level by pressing VOL + or –.
The volume level will be indicated on the
screen by green bars. As the volume level
increases, so do the number of bars. If the
volume decreases, the number of green bars
also decreases.
Press Direct channel selection buttons (0–9)
to select the channel.
TV mode direct channel selection
When the TV/CABLE selection is in the TV position, all
channels can be instantly selected by using two
buttons. (for example, to
select channel 2, press “0”,
CH 02
then “2”. If you press only “2”,
channel selection will be
delayed for a few seconds.)
For channels 10 and above,
press the 2 digits in order.
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
VOLUME
3
32
Set the TV/CABLE selection to the appropriate
position. (See page 23.)
TV
- VHF/UHF channels
CABLE - Cable TV channels
TO SELECT CABLE TV CHANNELS:
1-9:
Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press
“002”.
10-12:
Press “0”, then the remaining 2 digits.
Example, to select channel 12, press
“012”.
13-99:
Press the 2 digits in order. Example, to
select channel 36, press “36”.
100-125: Press the 3 digits in order. Example, to
select channel 120, press “120”.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding
channel will be selected in 2 seconds.
TV
VHF
2-13
UHF
14-69
Notes:
• If a channel with no broadcast is selected, the sound will automatically be muted.
• If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
20
5S00201A [E] (P13-23)
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
20
4/1/05, 3:16 PM
SLEEP
DISPLAY
VOL +/–
MUTE
CH /
CH RTN
GAME
■ DISPLAY
Press DISPLAY to display the current informations on
the screen. Press DISPLAY again to clear the display.
• Channel number or external input mode
• Stereo or SAP (Second Audio Program) audio status
• Audio output status
STEREO SAP
CH 012
SEL. STEREO
■ CH RETURN
This button allows you to go back to the last channel
selected by pressing CH RTN. Press CH RTN again to
return to the last channel you were watching.
■ MUTE
Press MUTE to switch off the sound. The unit’s sound
will be silenced and “MUTE” will briefly appear on the
screen. The sound can be switched back on by pressing
this button again or one of VOL + /–.
■ SLEEP
To set the unit to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count down 10 minutes for each press of SLEEP (120,
110, ...10, 0). After the sleep time is programmed, the
display will appear briefly every ten minutes to remind
you that the sleep timer is operating. To confirm the
sleep timer setting, press SLEEP and the remaining
time will be displayed for a few seconds. To cancel the
sleep timer, press SLEEP repeatedly until the display
turns to 0.
TV operation
■ CHANNEL UP/DOWN
Press and release CH
or . The channel automatically stops at the next channel set into memory.
For proper operation, before selecting channels, they
should be set into the memory. See page 23 “To
memorize channels”.
SLEEP
120
■ GAME MODE
After connecting a TV Game to the unit, press GAME.
The TV screen changes to the Game mode.
• The Game mode screen is adjusted to the suitable
brightness for your eyes.
• Game timer function: After one hour the Game timer
display will appear every 30 minutes for approx. 5
seconds showing how long the time has passed up
to 4 hours.
• If GAME is pressed during standby mode, the unit
turns on automatically and the Game mode screen
appears on the screen.
GAME
■ HEADPHONES
Insert a stereo headphones (not supplied) with a 1/8”
mini plug into the PHONES jack on the front panel. If
you connect headphones, the sound from TV speakers
is muted.
MUTE
21
5S00201A [E] (P13-23)
21
4/1/05, 3:16 PM
TV operation
Closed captions
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display closed captioned
television programs. Closed captioning will display text on the screen for
hearing impaired viewers or it will translate and display text in another
language.
CLOSED
CAPTION
Closed captions
Captions: This closed caption mode will display text on the screen in English or another language (depending on the
setting of the closed captions CH 1/2).
Generally, closed captions in English are transmitted on captions channel 1 and closed captions in other languages
are transmitted on captions channel 2.
Text: The text closed caption mode will usually fill the screen with a programming schedule or other information.
After selecting a closed caption mode, it will stay in effect until it is changed, even if the channel is changed.
If the captions signal is lost due to a commercial or a break in the signal, the captions will reappear when the signal is
received again. If the channels are changed, the captions will be delayed approximately 10 seconds. The captions will
appear in places on the screen where they will least interfere with the picture, usually on the bottom of the screen.
News programs will usually show three-line closed captions which scroll onto the screen.
Most other shows provide two or three lined captions placed near the character who is speaking so the viewer can
follow the dialogue. Words in italics or underlined describe titles, words in foreign languages or words requiring emphasis. Words that are sung usually appear enclosed by musical notes.
For television programs broadcasting with closed captions, look in your TV guide for the closed captions symbol (CC).
TO VIEW CLOSED CAPTIONS
Press CLOSED CAPTION to switch between normal TV and the two closed caption
modes (captions and full screen text). Closed captioning will display text on the screen
for hearing impaired viewers.
Notes:
• When selecting closed captions, the captioning will be delayed approximately 10 seconds.
• If no caption signal is received, no captions will appear, but the television will remain in the caption mode.
• Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning,
especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not
allow time for editing.
• When captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with closed
captions.
• Some cable systems and copy protection systems may interfere with the closed captioned signal.
• If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
NOTICE OF POSSIBLE ADVERSE EFFECT ON TV PICTURE TUBE
Avoid displaying stationary images on your TV screen for extended periods of time. Fixed (non-moving) images (such as
still PIP/POP windows, black/gray bars in wide-screen or PIP/POP formats, stock tickers, video game patterns, TV station
logos, closed captions, and websites) can become permanently ingrained in the picture tube. This type of damage is NOT
COVERED BY YOUR WARRANTY.
22
5S00201A [E] (P13-23)
22
4/1/05, 3:16 PM
To memorize channels
0–9
This unit is equipped with a channel memory feature which allows channels to
skip up or down to the next channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be programmed into the unit’s
memory. In addition to normal VHF and UHF channels, this unit can receive up
to 113 Cable TV channels. To use this unit with an antenna, set the TV/CABLE
selection to the TV position. When shipped from the factory, this selection is in
the CABLE position.
TV/CABLE selection
1
MENU
Automatic memory tuning
Press MENU in the TV mode, then press
to select
option.
or
Press
or
to select the “AUTO CH MEMORY”,
then press .
The TV will begin memorizing all the channels
available in your area.
CABLE
/ / / / MENU
2
Press
or
CABLE
Press
or
To ADD/DELETE channels
1
/ / / / MENU
3
to select “TV/CABLE”.
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
TV operation
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / /
Press
press
or
to select “ADD/DELETE”, then
.
to select “TV” or “CABLE”.
TV
- VHF/UHF channels
CABLE - Cable TV channels
TV/CABLE
AUTO CH MEMORY
ADD/ DELETE
TV
2
Select the desired channel to be added or
deleted using Direct channel selection buttons
/ .
(0–9) or
3
Press
or
to select “ADD” or “DELETE”,
whichever function you want to perform.
/ / / / MENU
4
Press MENU repeatedly until the menu screen is
cleared.
Cable TV chart
The chart below is typical of many cable system channel
allocations.
ADD
0-9 /
CH 001
/
/
/
/ MENU
23
5S00201A [E] (P13-23)
23
4/1/05, 3:16 PM
TV operation
Setting the V-Chip
0–9
An age limitation can be set to forbid children to watch programs according to
“TV RATING” and “MOVIE RATING” level set. To use the V-Chip function,
you must register a password.
ENTER
/ / /
CANCEL
MENU
Notes:
• If you forget the password, you cannot set the V-Chip.
• To avoid forgetting the password, write it down and keep in
the safe place.
To register password
1
Press MENU, then press
option.
To change password
or
to select
1
In the V-CHIP menu, press
or
to select
“CHANGE PASSWORD”, then press .
V-CHIP SET
NEW
PASSWORD
/
/
/
/ MENU
/
2
Press
or
OFF
V-CHIP
V-CHIP SET
CHANGE PASSWORD
:––––
/
/ MENU
to select “PASSWORD”.
2
Enter the new password using Number buttons
(0–9), then press ENTER.
V-CHIP SET
NEW
PASSWORD
:––––
CHANGE PASSWORD
NEW
PASSWORD
0–9/ENTER/CANCEL/MENU
3
Enter the password (4 digits) using Number
buttons (0–9), then press ENTER.
• If you put a wrong number, press CANCEL.
:––––
0-9/ENTER/CANCEL/MENU
3
Enter the same password again using Number
buttons (0–9) for safety, then press ENTER.
V-CHIP SET
NEW
PASSWORD
CHANGE PASSWORD
:
CONFIRM
PASSWORD
0–9/ENTER/CANCEL/MENU
0-9/ENTER/CANCEL/MENU
“ ” appears instead of the number.
4
Enter the same password again using Number
buttons (0–9) for safety, then press ENTER.
Now the password was registered and V-Chip
setting menu will appear on the display.
4
Press MENU repeatedly until the menu screen
is cleared.
V-CHIP SET
CONFIRM
PASSWORD
:
0–9/ENTER/CANCEL/MENU
24
5S00201A [E] (P24-27)
24
:
4/1/05, 3:16 PM
DISPLAY
ENTER
/ / /
MENU
To set the V-Chip
1
In the V-CHIP menu, press
or
“V-CHIP SET”, then press .
to select
/
/ MENU
/
OFF
G
PG
PG-13
R
/
OFF :
TV-Y :
TV-Y7 :
TV-G :
TV-PG :
TV-14 :
TV-MA:
/
/
TV-Y
OFF
/ ENTER/MENU
or
/ ENTER/MENU
5
Press
:
:
:
:
:
or
to select “V-CHIP”.
/
6
/
/
OFF
/ MENU
Press
or
to display “ON”.
Now your settings were set into the memory.
V-CHIP
V-CHIP SET
CHANGE PASSWORD
ON
to select “MOVIE RATING”.
/
V-CHIP SET
TV RATING
MOVIE RATING
/
5S00201A [E] (P24-27)
/
V-CHIP
V-CHIP SET
CHANGE PASSWORD
TV RATING is not set
All children
7 years old and above
General audience
Parental guidance
14 years old and above
17 years old and above
When you select TV- Y7, TV-PG, TV-14 or TV-MA,
press DISPLAY to show the contained rating.
Press / or / to select the desired item you
want.
Press
/
TV-Y
PG-13
MOVIE RATING is not set
All ages
Parental guidance
Parental guidance less than 13 years old
Under 17 years old Parental guidance
suggested
NC-17 : 17 years old and above
X
: Adult only
or
to select “TV RATING”, then
Press
press
or
to display the desired setting.
After setting, press ENTER.
V-CHIP SET
TV RATING
MOVIE RATING
3
V-CHIP SET
TV RATING
MOVIE RATING
TV operation
2
or
to select desired rating.
Press
After setting, press ENTER.
OFF
V-CHIP
V-CHIP SET
CHANGE PASSWORD
/
4
25
/
/
TV-Y
OFF
/ ENTER/MENU
7
/
/
/ MENU
Press MENU repeatedly until the menu screen is
cleared.
To use after the TV is protected
When the program applied to the V-Chip setting is received,
enter the password, then press ENTER. Protection can be
canceled.
Note:
The V-Chip function is activated only on programs that have
the rating signal.
4/1/05, 3:16 PM
25
TV operation
Picture control adjustment/
Adjusting the picture preference
ENTER
Picture controls are factory preset but you can adjust them individually as follows:
And also you can select four picture modes—Standard, Sports, Movie, and
Memory—as described in the following table:
/ / /
CANCEL
MENU
Picture control adjustment
Adjusting the picture preference
1
1
Press MENU, then press
option.
or
to select
Press MENU, then press
option.
Press
.
or
to select “PICTURE”, then press
PICTURE
PICTURE PREFERENCE
/
3
/
2
Selection
/
0
+32
0
0
0
darker
lower
paler
reddish
softer
lighter
higher
deeper
greenish
sharper
Note:
The CONTRAST default setting is set to maximum
(+32) at the factory.
After your desired setting press MENU
repeatedly until the menu screen is cleared.
3 To return all adjustments to the factory preset levels
Press CANCEL while making picture adjustments.
26
5S00201A [E] (P24-27)
/
26
/ MENU
3
/ / MENU
Press
or
to select the desired picture
mode, then press ENTER.
PICTURE PREFERENCE
STANDARD
SPORTS
MOVIE
MEMORY
Pressing
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
/
PICTURE
PICTURE PREFERENCE
/ CANCEL / MENU
/
/
Press
or
to select “PICTURE
PREFERENCE”, then press .
/ MENU
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
4
/
Press
or
to select the item you want to
adjust, then press
or
to adjust the setting.
/
to select
PICTURE
PICTURE PREFERENCE
PICTURE
PICTURE PREFERENCE
2
or
/
/ ENTER / MENU
Mode
Picture quality
STANDARD
SPORTS
MOVIE
MEMORY
Standard picture quality (factory-set)
Bright and dynamic picture (factory-set)
Movie-like picture setting (factory-set)
Your personal preferences (set by you;
see “Picture control adjustment” as left)
4
After your desired setting press MENU
repeatedly until the menu screen is cleared.
Note:
You cannot select “PICTURE PREFERENCE” in the Game
mode.
4/1/05, 3:17 PM
Stereo and Second Audio Program (SAP)
The unit is equipped with a feature known as multi-channel TV sound or MTS.
MTS broadcasts greatly enhance TV viewing by bringing you programs with high
fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.
AUDIO SELECT
To select desired sound
When the TV is turned on or a channel selection is
made, make certain the “STEREO” appears on the
screen. This means that Stereo broadcasting is
available. You can enjoy stereo sound from the left
and right speakers.
Press AUDIO SELECT to select the desired sound.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT to
change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound.
SEL. STEREO
TV operation
Listening to stereo sound
MONO + SAP BROADCASTING
MONO SOUND
(MAIN)
STEREO
SAP SOUND
CH 013
STEREO+SAP BROADCASTING
STEREO SOUND
(MAIN)
SAP SOUND
MONO SOUND
(MAIN)
Listening to SAP (Second Audio Program)
When the TV is turned on or a channel selection is
made, make certain the SAP appears on the screen.
This means that the Second Audio Program broadcasting is available.
STEREO SAP
CH 013
27
5S00201A [E] (P24-27)
27
4/1/05, 3:17 PM
Basic playback
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
DVD
VCD
CD
1 3,5
5
6 4
Basic playback
Preparations:
• Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time,
you need to set “Starting setup” 18 .
• When connecting to other equipment, turn power off.
1
Press POWER on the unit or on the remote control to turn on the unit.
The Power indicator will light.
• Every time you press POWER, the unit starts from
TV mode.
• When using an amplifier, switch on the amplifier.
5
Press OPEN/CLOSE or PLAY.
OR
The disc tray closes automatically.
On the TV-screen, “ ” changes to
“Reading” and then playback
commences.
Reading
2
Press TV/DVD to select DVD mode.
The DVD startup screen will appear on the screen.
“Reading” display will change to “No Disc”. (If DVD
disc has already loaded,
Reading
playback will start automatically.)
• A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press C/D or B/A to select title, then press ENTER.
Title is selected and play commences.
6
3
Press OPEN/CLOSE.
4
Place the disc on the disc tray.
Press STOP to end playback.
The disc tray opens.
3 Resuming facility
• The unit records the stopped
point, depending on the disc. “ ”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again or
unload the disc (“3” appears
on the screen.), the unit will
clear the stopped point.
3 To start playback in the stop mode
Press PLAY.
With the playback
side down
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the unit to malfunction.
• Do not place a disc which is unplayable on the
disc tray.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.
28
5S00201A [E] (P28-31)
28
4/1/05, 3:17 PM
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this unit, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About
The DVD VCD CD icons on the heading bar show the playable discs for the
function described under that heading.
: You can use this function with DVD video discs.
VCD : You can use this function with Video CDs.
CD
: You can use this function with Audio CDs and CD-R/RW CDs.
DVD
VCD
CD
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback, press
PLAY.
TV/DVD
POWER
OPEN/CLOSE
ENTER
/ / /
STOP
PLAY
PAUSE
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
• The sound is muted during still
mode.
Basic playback
To stop playback
Press STOP.
Be sure to press OPEN/CLOSE to close the disc tray
after you remove the disc.
Notes:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again & " .
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (i.e. the wrong way up) and press OPEN/CLOSE or PLAY on the unit,
“Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 37 .
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use OPEN/CLOSE to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the unit
to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the unit to
malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER on your remote control once the movie is completed.
• There may be a slight delay between you pressing the button and the function activating.
29
5S00201A [E] (P28-31)
29
4/1/05, 3:17 PM
Basic playback
Playing a disc (continued)
PAUSE
PLAY
FF
SKIP
SLOW
REV
DVD
VCD
CD
/
Playing in fast reverse or fast forward directions
To resume normal playback
Press PLAY.
Press REV or FF during playback.
REV: Fast reverse playback
FF: Fast forward playback
Each time you press REV or FF, the
playback speed changes.
DVD
VCD
/
PLAY
Notes:
• The unit mutes sound and subtitles during reverse and
forward scan of DVD/VCD video discs. However, the unit
plays sound during fast forward or fast reverse play of audio
CDs.
• The playback speed may differ depending on the disc.
Playing frame by frame
Press PAUSE during still playback.
To resume normal playback
Press PLAY.
Each time you press PAUSE, the
picture advances one frame.
Note:
The sound is muted during frame by frame playback.
DVD
VCD
Playing in slow-motion
Press SLOW
(REVERSE) or
during playback.
(FORWARD)
Each time you press the button, the
slow-motion speed changes.
DVD
VCD
CD
To resume normal playback
Press PLAY.
Notes:
• The sound is muted during slow-motion playback.
• The Video CD cannot play Reverse Slow.
Locating a chapter or track
Press SKIP
or
repeatedly to display the chapter or track number you want.
Playback starts from the selected chapter or track.
To locate succeeding chapters or
tracks.
Note:
Press and hold SKIP on the unit during playback to play forward or in reverse.
Afterwards, each time you press and hold SKIP, the playback speed will change.
Playback starts from the beginning of
the current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of
the preceding chapter or track.
Notes:
• A prohibition symbol “
” may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the unit cannot access the feature at this time. This does not indicate a problem with the unit.
• The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are very susceptible.
30
5S00201A [E] (P28-31)
30
4/1/05, 3:17 PM
Advanced playback
DISPLAY
Zooming/Locating desired scene
0–9
JUMP
ZOOM
/ / /
CANCEL
ENTER
DVD
VCD
CD
DVD
VCD
CD
Zooming
Locating desired scene
This unit will allow you to zoom in on the frame image. You Use the title, chapter and time recorded on the DVD disc to
can then make selections by switching the position of the locate the desired point to play back. In the case of VCD/CD
discs, time and track are used to locate the desired point to
frame.
play back.
Press ZOOM during playback.
To check the title, chapter and time, press DISPLAY.
1
The center part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and 3
(x 2.0).
1
Press JUMP during playback or stop mode.
Time
/
/6
Title
Chapter
/
/Enter/0 9/Cancel/Jump
1
2
2
Press
frame.
/ / /
to view a different part of the
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
to select the “Time”, “Title” or
Time
/
/6
Title
Chapter
/
/Enter/0 9/Cancel/Jump
You may move the frame from the
center position to UP, DOWN, LEFT
or RIGHT direction.
3
Press
or
“Chapter”.
3
Advanced playback
• “Time” only works in playback or
resume stop mode.
Press Number buttons (0–9) to change the
number.
Time
/
/6
Title
12
Chapter
/
/Enter/0 9/Cancel/Jump
• If you input a wrong number, press
CANCEL.
• Refer to the package supplied with
the disc to check the numbers.
Notes:
• You can select the Pause, Slow or Search playback in the zoom
mode.
• Some discs may not respond to zoom feature.
4
Press ENTER. Playback starts.
• When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
Note:
In case of the Video-CD playback with PBC, the JUMP does not
work. To turn off PBC, see page 37 .
31
5S00201A [E] (P28-31)
31
4/1/05, 3:17 PM
Advanced playback
Marking desired scenes
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
C/D
ENTER
CANCEL
MARKER
DVD
VCD
1
Marking the scenes
Press MARKER during playback.
DVD
VCD
1
Returning to the scenes
Press MARKER during playback or stop mode.
2
Select the blank Marker using C or D.
Then press ENTER at the desired scene.
2
Press C or D to select the Marker 1-3.
• Repeat this procedure to set the
other 2 scenes.
3
3
Press ENTER.
Playback starts from the marked
scene.
Press MARKER to remove this display.
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
Notes:
• Some discs may not work with the marking operation.
• The marking is cancelled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
32
5S00201A [E] (P32-33)
32
4/1/05, 3:17 PM
Repeat playback/A-B Repeat playback
PLAY MODE
/ /▼
PLAY
REPEAT A-B
DVD
VCD
CD
1
2
DVD
VCD
CD
Repeat playback
Press PLAY MODE during playback or stop mode.
A-B Repeat playback
A-B repeat playback allows you to repeat material between
two selected points.
1
Press REPEAT A-B during playback.
The start point is selected.
A
[DVD]
A to select “Chapter” or “Title”.
Press B/A
The unit automatically starts repeat
playback after finishing the current title
or chapter.
Off
/Play Mode
2
Advanced playback
Repeat
Press REPEAT A-B again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, returns to Point A automatically, then
starts again.
[Audio CD, Video CD]
Press D to select “Repeat”.
A to select “Track” or “All”.
Press B/A
A B
The unit automatically starts repeat
playback after finishing the current
track.
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
3
Press PLAY MODE again to make the screen
disappear.
To resume normal playback
Select Repeat : “Off” in step 2.
Notes:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, repeat functions are prohibited during playback.
To resume normal playback
Press REPEAT A-B again.
“
Off ” appears on the screen.
Notes:
• In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
• You cannot set the A-B Repeat for the scenes that include
multiple angles.
• A-B Repeat playback does not work when Repeat playback is
activated.
• You may not be able to set A-B Repeat, during certain scenes
of the DVD.
• A-B Repeat does not work with an interactive DVD.
• A-B Repeat is prohibited when PBC is on.
33
5S00201A [E] (P32-33)
33
4/1/05, 3:17 PM
Advanced playback
Program playback/Random playback
0–9
You can arrange the playback order of tracks on the disc. And also the unit
selects tracks at random and playback them. These feature works for Audio
CD and Video CD.
VCD
CD
1
2
Program playback
4
Press PLAY MODE in the stop mode.
"
!
"
$
!
$
• To program others, repeat step 3.
• If you input a wrong number, press
CANCEL.
VCD
CD
• To resume normal playback, select Play Mode
“OFF” in step 2.
!""
Press / or / to select the programming
position. Use Number buttons (0–9) to input the
Track numbers.
Press / / / to select “Program Playback”
and press ENTER.
The programs you selected will start to playback in
the order.
Press
or
to select Play Mode, then press
/ to select “Program”.
#
#
3
PLAY MODE
▲/▼/ /
CANCEL
PLAY
SKIP7
ENTER
#$$
"##
■ To change the program
1. In the program mode, press C/D/B /A to select the track
number.
2. Press Number buttons (0–9) to select the track number to
be replaced.
■ To clear the program one by one
In the program mode, press C/D/B/A to select the track
number. Then press CANCEL.
■ To clear all the programs
In the program mode, press C/D/B/A to select “Clear”. Then
press ENTER.
Notes:
• In playing back the Video CD with PBC, you cannot set
Program playback.
• The program is cancelled when you open the disc tray or
turn the power off.
Random playback
1
Press PLAY MODE during playback or stop
mode.
2
D to select Play Mode, then press
Press C/D
B/A
A to select “Random”.
3
Press PLAY.
The Random Playback will start.
• If you set “Random” during playback mode,
Random playback will begin after the track that is
currently being played has ended.
• To resume normal playback, select Play Mode:
“Off” in step 2.
Note:
In playing back the Video CD with PBC, you can not set
Random playback.
34
5S00201A [E] (P34-37)
34
4/1/05, 3:17 PM
Changing angles/Title selection/DVD menu
ENTER
DVD MENU
▲/▼/ /
PLAY
ANGLE
TOP MENU
Changing angles
When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
1
Press ANGLE during playback.
The current angle will appear.
2
Press ANGLE repeatedly until the desired angle
is selected.
1/9
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
1
Press TOP MENU during playback.
2
Press
Title menu appears on the screen.
/
/
/
3
Press ENTER or PLAY.
The playback of the selected title will
start.
Advanced playback
Title selection
to select the desired title.
Note:
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a “title menu” may simply be called a
“menu” or “title” in the instructions supplied with the disc.
DVD menu
Some DVDs allow you to select the disc contents using the menu.
When you play back these DVDs, you can select the subtitle language and sound-track language, etc. using the menu.
1
Press DVD MENU during playback.
The DVD menu appears on the screen.
• Press DVD MENU again to resume
playback at the scene when you
pressed DVD MENU.
2
Press
/
/
/
to select the desired item.
3
Press ENTER.
The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.
Note:
Depending on the DVD, you may not be able to resume
playback from the scene point when you pressed DVD MENU.
35
5S00201A [E] (P34-37)
35
4/1/05, 3:17 PM
Advanced playback
Changing soundtrack language/
Subtitles
DVD
VCD
Changing soundtrack language
You can select the language when you play a multilingual disc.
1
SUBTITLE
AUDIO SELECT
Press AUDIO SELECT during playback.
The current soundtrack language will
appear.
Subtitles
When playing back a disc recorded with subtitles, you can
select the subtitle language or turn the subtitle off.
1
Press SUBTITLE repeatedly during playback until
your desired language appears.
1/8 Eng
2/8 Fra Dolby Digital
2
Press AUDIO SELECT repeatedly until the desired
language is selected.
2
To turn off the subtitle, press SUBTITLE until
“Off” appears.
Off
1/8 Eng Dolby Digital
• The on screen display will disappear after a few
seconds.
In case of Video CD playback
Audio type changes as follows each time you press
AUDIO SELECT.
LR
L
• The on screen display will disappear after a
few seconds.
Notes:
• Depending on the DVD, you may not be able to change
subtitles, or to turn subtitles on or off.
• While playing a DVD, the subtitle may change when you
open or close the disc tray.
• In some cases, a selected subtitle language may not be
changed immediately.
R
Notes:
• If the desired language is not heard after pressing the
button several times, the language is not recorded on the disc.
• Changing soundtrack language is cancelled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
• If you select DTS in playing DTS-encoded disc, no sound
will be heard from the unit’s speakers.
36
5S00201A [E] (P34-37)
36
4/1/05, 3:18 PM
1
Disc status/To turn off the PBC
DISPLAY
PLAY MODE
▲/▼/ /
ENTER
DVD
VCD
CD
Disc status
VCD
With each press of DISPLAY, the status of the disc
will appear on the screen and change as follows.
DVD
00:34:56 01:12:33
To turn off the PBC
1
Press PLAY MODE in the stop mode.
2
Press / to select Play Mode, then press
/ to select “Off”.
00:34:56 01:12:33
1/99 Chapter 1/999
1/9
1/8 Eng Dolby Digital
1/32 Eng
Title
Video CD
00:12
PBC
Track –/–
04:32
00:12
04:32
3
Press PLAY MODE again to make the screen
disappear.
To turn on the PBC
To make status display disappear, press DISPLAY again.
Audio CD
34:56
Select Play Mode : “PBC” in step 2.
Note:
You can also turn off the PBC by pressing number button 1
and ENTER in the stop mode.
Advanced playback
To make status display disappear, press DISPLAY again.
71:33
Track 11/99
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
37
5S00201A [E] (P34-37)
37
4/1/05, 3:18 PM
Function setup
Customizing the function settings
You can change the default settings to customize performance
to your preference.
ENTER
C/D/B/A
SETUP
RETURN
DVD
VCD
CD
1
Setting procedure
Press SETUP during stop mode.
The following on-screen display
appears.
5
To make SETUP screen disappear, press
SETUP or RETURN.
/Enter/Setup/Return
2
Press B or A to select the desired section, then
press D or ENTER.
3
Press C or D to select the desired option.
4
Change the selection using B or A, by referring
to the corresponding pages 40~42.
• Repeat steps 3 and 4 to change
other settings.
• To select another operation, go
back to step 2 by pressing C
repeatedly.
38
5S00201A [E] (P38-43)
38
4/1/05, 3:18 PM
Setting details
Section
Details
Page
Menu
Subtitle
Audio
To select the language of “Menu”, “Subtitle” and
“Audio” if more than one language are recorded on
the disc.
OSD
To select a preferred language for on screen display.
Tv Screen
To select a picture size according to the aspect
ratio of your TV.
Display
To turn on or de-activate the operational status display on the screen.
Picture Mode
To select a preferred picture mode from “Video”,
“Film” or “Auto”.
DRC
To select On or Off for DRC (Dynamic Range Control).
Password
Input 4-digit password to set the parental level.
Parental
To select a preferred parental level for the parental
setting.
40
41
Function setup
Option
42
39
5S00201A [E] (P38-43)
39
4/1/05, 3:18 PM
Function setup
Customizing the function settings (continued)
Setting details
Menu
English
Subtitle
English
Audio
English
OSD
English
/Setup/Return
Menu, Subtitle, Audio
You can select the language of “Menu”, “Subtitle” and
“Audio” if more than one languages are recorded onto
the disc.
English, Francais, Espanol:
The selected language will be heard or seen.
Other:
Other language can be selected (see the
“Language code list” on page 44).
Original: (Audio)
The unit will select the first-priority language of
each disc.
Off: (Subtitle)
Subtitles do not appear.
Note:
If the selected language is not recorded on the disc, the
first-priority language is selected.
Tv Screen
4:3
Display
On
Picture Mode Auto
/Setup/Return
Tv Screen
You have the following screen sizes to choose from:
4:3
Letter box:
Select this mode when connecting to a conventional
TV. When playing back a wide screen-DVD disc, it
displays the wide picture with black bands at the
top and bottom of screen.
4:3
Pan scan:
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
Press OPEN/CLOSE to view in the selected screen size.
Note:
If the DVD disc is not formatted in the pan & scan style,
it displays 4:3 style.
Display
OSD
The setup language can be selected.
English: To display OSD language is English.
Francais: To display OSD language is French.
Espanol: To display OSD language is Spanish.
On screen display can be switched on or off when you
press the buttons.
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
40
5S00201A [E] (P38-43)
40
4/1/05, 3:18 PM
Picture Mode
There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video
content (video signals recorded at 30 frames per second). Make this selection according to the type of content
being viewed.
Auto: Select this position normally.
The DVD player automatically detects source
content, film or video, of playback source.
Film:
Suitable for playback of film content
pictures.
Note:
Depending on the disc, pictures may be cut off or doubled.
In this case, select “Video”.
On
/Setup/Return
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
On: Loud sound such as explosion or similar
is toned down slightly when played back.
This makes it suitable for when it is connected to a stereo.
Off: It plays back at the recording level on the
disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
Function setup
Video: Suitable for playback of video content
pictures.
DRC
41
5S00201A [E] (P38-43)
41
4/1/05, 3:18 PM
Function setup
Customizing the function settings (continued)
Setting details
To change the parental level
Password
Parental
---Off
/0Ð9/Enter/Cancel/Setup/Return
Parental control setting
Some discs are specified not suitable for children.
Such discs can be limited not to play back with the unit.
1) Press C or D to select “Parental”, then press B
or A until the level you require appears.
• Level Off: The parental control setting does not
function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press C or D to select “Password”.
Press Number buttons (0–9) to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press CANCEL.
3) Press ENTER to store the password.
Note: Now the rating is locked and the setting can
not be changed unless you enter the correct pass
word.
4) Press OPEN/CLOSE to activate Parental control
setting. (See “Temporary disabling of rating level
by DVD disc” on page "! .)
1) Press C or D to select “Password”.
2) Press Number buttons (0–9) to enter the password
you have stored.
3) Press ENTER.
• The rating is now unlocked.
4) Press C or D to select “Parental”, then press B
or A to change the parental level.
5) Press C or D to select “Password”, then press
Number buttons (0–9) to enter the password.
Note: You can change the password if you want.
6) Press ENTER.
Now the parental level is changed and locked.
If you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
“No Disc” appears on the screen.
4. While holding STOP down on the front panel, press
7 on the remote control. “PASSWORD CLEAR”
appears on the screen.
5. Enter a new password again.
Note:
If each setup (pages 40~42) has been completed, the unit
can always be worked under the same conditions (especially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
42
5S00201A [E] (P38-43)
42
4/1/05, 3:18 PM
OPEN/CLOSE
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
0–9
▲/▼
ENTER
PLAY
RETURN
1
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit 28 .
4
Enter the password with Number buttons (0–9).
Then press ENTER.
To exit from the entry, press RETURN.
2
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds the parental
control level#.” screen will then appear.
Reading
Playback will commence if the entered
password was correct.
Your disc exceeds
the parental control level#.
/Enter/Return
If you wish to cancel the set rating level temporarily, select “Parental Control Level” with
or
, then press ENTER. If the 4-digit password at
step 2 on page 42 has been set, the password
entering screen will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or
have forgotten) the password, select “Cancel
Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
Note:
This temporary cancellation of rating level will be kept until the
disc is ejected.
When the disc is ejected, the original rating level will be set again
automatically.
Function setup
Parental Control Level
Cancel Picture
3
5
43
5S00201A [E] (P38-43)
43
4/1/05, 3:18 PM
Others
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” " .
Language Name Code
Language Name Code
Language Name Code
Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto 2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance2823 Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian 2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
44
5S00201A [E] (P44-48)
44
4/1/05, 3:18 PM
Troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer
or service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
POWER
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
5
Poor sound or no sound.
• Station or cable TV experiencing problems, tune to another station.
• Check Volume adjustments.
• Check for sources of possible interference.
20
20
47
Poor picture or no picture.
• Station or cable TV experiencing problems, tune to another station. 20
13, 14
• Check antenna or cable TV connections, reorient antenna.
47
• Check for sources of possible interference.
26
• Check picture control adjustments.
Unit does not operate.
TV BROADCAST RECEPTION
• Station or cable TV experiencing problems, tune to another station. 20
Poor reception on some channels. • Station signal is weak, reorient antenna to receive weaker station. 13,14
47
• Check for sources of possible interference.
Poor color or no color.
Picture wobbles or drifts.
No cable TV reception.
Horizontal or diagonal bars on
screen.
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
No reception above channel 13.
• Make sure TV/CABLE selection is in the appropriate position.
• If using antenna, check UHF antenna connections.
23
13
TV shuts off.
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
20
21
–
Closed - Caption is not activated.
• TV station experiencing problems or program tuned is not closed
20
captioned. Try another channel.
• Check cable TV connection or VHF/UHF antenna, reposition or 13,14
rotate antenna.
• Press the CLOSED CAPTION button to turn on the closed
22
caption decoder.
Display is not shown in your
language.
• Select proper language in the menu options.
Others
• Station or cable TV experiencing problems, tune to another station. 20
• Make sure channels are set into memory.
23
• Check picture control adjustments.
26
• Check antenna or cable TV connections, reorient antenna.
13, 14
• Check for sources of possible interference.
47
• Station or cable TV experiencing problems, tune to another station. 20
23
• Make sure channels are set into memory.
–
• Cable TV company is scrambling signal.
13, 14
• Check antenna orientation.
14
• Check all cable TV connections.
23
• Set TV/CABLE selection to the CABLE position.
20
• Station or cable TV system problems, try another station.
13,14
47
19
45
5S00201A [E] (P44-48)
45
4/1/05, 3:18 PM
Others
Troubleshooting (continued)
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
28
7
8
No picture.
• TV/DVD selector is not set correctly.
28
No sound.
• Check the input selector of the amplifier is set properly.
• The unit is in the special playback mode.
• Select the correct Audio Output position on AV amplifier.
–
30
–
Picture is distorted during fast
reverse/forward playback.
• The picture will be distorted occasionally.
–
Stopping playback, search, slowmotion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions.
–
No on-screen display.
• Select Display On.
40
No surround sound.
• The setup does not match your stereo system.
16
The unit or remote operation key
is not functioning.
• Turn off the unit and unplug the AC power cord for several minutes, then replug it.
Playback does not start when the
title is selected.
• Check the Parental setup.
Audio soundtrack and/or subtitle
language is not changed when
you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
–
42
36
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press the SUBTITLE button.
36
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
35
• The function is prohibited with the unit or the disc.
30
• Aim at the remote control at the remote sensor.
• Operate within approx. 5 meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
12
“
” appears on the screen.
REMOTE CONTROL
The remote control does not
function.
46
5S00201A [E] (P44-48)
46
4/1/05, 3:18 PM
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF
antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the unit is connected to a Cable TV
system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is
the direct path and the other is reflected by tall buildings, hills or other
large objects. Changing the direction or position of the antenna may
improve the reception.
SNOW
If the unit is located far from the TV station, in a fringe reception area
where the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external
antenna may be necessary.
Others
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a
loss of contrast in the picture. Changing the direction and position of
the antenna or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST
or BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the unit from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
47
5S00201A [E] (P44-48)
47
4/1/05, 3:18 PM
Others
Specifications
General
AC 120 V 60 Hz
Operation: 90 W, Stand by: 5 W
14 Inch* (357.0 mm diagonal)
1-1/2 x 2-11/16 inches (38.1 x 68.6 mm), 8 ohm x 2
2.5 W + 2.5 W
29.8 lbs (13.5 kg)
Width: 17-5/16 inches (440 mm)
Height: 15-1/2 inches (393 mm)
Depth: 15-1/2 inches (392.5 mm)
181 channel freq. synthesized
VHF
2-13
UHF
14-69
CATV
125 Channels
UHF/VHF: 75 Ω coaxial
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)
DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz
Temperature: 5˚C-40˚C (41˚F-104˚F), Operating status: Horizontal
Power supply
Power consumption
Picture tube
Speaker
Audio output power
Weight
Dimensions
Tuner
Antenna input
Applicable disc
Frequency range
Operating conditions
Input/Output
Video input
Audio input
Audio output (DIGITAL COAXIAL)
1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
–8 dBm, 50 kΩ, negative sync., pin jack (L/R) x 1
0.5 V (p-p), 75 Ω, pin jack x 1
Supplied accessories
Remote control (DC-SB1) ..................................... 1
Batteries (AAA) ..................................................... 2
300-75 Ω matching transformer ............................ 1
* Screen size is approximate.
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
48
5S00201A [E] (P44-48)
48
4/1/05, 3:18 PM
Limited United States Warranty
for CRT-based TV/DVD Combinations, TV/VCR Combinations, and TV/DVD/VCR Combinations,
25” and Smaller (“TV Combination(s)”)
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in
the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR
ANY PERSON RECEIVING THIS TV COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER
AND TO NO OTHER PURCHASER OR TRANSFEREE.
TV COMBINATIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING,
WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES.
TV COMBINATIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION,
CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited Ninety (90) Day Warranty on Labor
TACP warrants this TV Combination and its parts against
defects in materials or workmanship for period of ninety (90)
days after the date of original retail purchase. DURING THIS
PERIOD, TACP WILL, AT TACP'S OPTION, REPAIR OR
REPLACE A DEFECTIVE PART WITH A NEW OR
REFURBISHED PART WITHOUT CHARGE TO YOU FOR
PARTS OR LABOR.
Limited Two (2) Year Warranty on Picture Tube
TACP further warrants the picture tube in this TV
Combination against defects in materials or workmanship for
a period of two (2) years after the date of original retail
purchase. DURING THIS PERIOD, TACP WILL, AT TACP'S
OPTION, REPAIR OR REPLACE A DEFECTIVE PICTURE
TUBE WITH A NEW OR REFURBISHED PICTURE TUBE
WITHOUT CHARGE TO YOU, PROVIDED THAT IF A
DEFECTIVE PICTURE TUBE IS REPAIRED OR
REPLACED AFTER ONE (1) YEAR AFTER THE DATE OF
ORIGINAL RETAIL PURCHASE, YOU MUST PAY FOR ALL
LABOR CHARGES IN CONNECTION WITH THE REPAIR
OR REPLACEMENT THEREOF.
Rental Units
The warranty for TV Combination rental units begins on the
date of the first rental or thirty (30) days after the date of
shipment to the rental firm, whichever comes first.
Limited Warranty for Commercial Units
TACP warrants TV Combinations that are sold and used for
commercial purposes as follows: all parts are warranted
against defects in materials or workmanship for a period of
ninety (90) after the date of original retail purchase.
DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION,
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW
OR REFURBISHED PART WITHOUT CHARGE TO YOU.
Complete and mail the enclosed product registration card or
register your TV Combination online at
www.tacp.toshiba.com/service as soon as possible. By
registering your TV Combination you will enable TACP to
bring you new products specifically designed to meet your
needs and help us to contact you in the unlikely event a
safety notification is required under the U.S. Consumer
Product Safety Act. Failure to complete and return the
product registration card does not diminish your warranty
rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must retain your original bill of sale or provide
other proof of purchase.
(2) All warranty servicing of this TV Combination must be
performed by an Authorized TACP Service Station.
Others
Limited One (1) Year Warranty on Parts
TACP further warrants the parts in this TV Combination
against defects in materials or workmanship for a period of
one (1) year after the date of original retail purchase.
DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION,
REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW
OR REFURBISHED PART WITHOUT CHARGE TO YOU
FOR THE PART, PROVIDED THAT IF A DEFECTIVE PART
IS REPAIRED OR REPLACED AFTER NINETY (90) DAYS
AFTER THE DATE OF ORIGINAL RETAIL PURCHASE,
YOU MUST PAY ALL LABOR CHARGES IN CONNECTION
WITH THE REPAIR OR REPLACEMENT THEREOF.
Owner's Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this
TV Combination.
(3) The warranties from TACP are effective only if this TV
Combination is purchased and operated in the
Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup,
adjustment of customer controls and installation or repair
of antenna systems are not covered by this warranty.
Reception problems caused by inadequate antenna
systems, misaligned satellite dishes, cable television
distribution, VCRs, DVD players/recorders, personal
computer level IEEE-1394 devices, and any other
connected signal source device are your responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above, and do not extend to any
TV Combination or parts that have been lost or
discarded by you or to damage to the TV Combination or
parts caused by fires, misuse, accident, Acts of God
(such as lightning or fluctuations in electric power),
improper installation, improper maintenance, or use in
violation of instructions furnished by TACP; use or
malfunction through simultaneous use of this TV
Combination and connected equipment; or to units that
have been modified or had the serial number removed,
altered, defaced, or rendered illegible.
49
5S00201A [E] (P49-Back)
49
4/1/05, 3:18 PM
How to Obtain Warranty Service
If, after following all of the operating instructions in this
manual and reviewing the section
entitled “Troubleshooting,” you find that service is needed:
(1) To find the nearest TACP Authorized Service Station,
visit TACP's website at www.tacp.toshiba.com/service
or contact TACP's Consumer Solution Center toll free at
1-800-631-3811.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY
VARY FROM STATE TO STATE IN THE U.S.A. SOME
STATES OF THE U.S.A. DO NOT ALLOW LIMITATIONS
ON THE DURATION OF AN IMPLIED WARRANTY, WHEN
AN ACTION MAY BE BROUGHT, OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. THEREFORE, THE ABOVE PROVISIONS
MAY NOT APPLY TO YOU UNDER SUCH
CIRCUMSTANCES.
(2) You must present your original bill of sale or other proof
of purchase to the TACP Authorized Service Station. You
must deliver the entire TV Combination to a TACP
Authorized Service Station. You must pay for all
transportation and insurance charges for the TV
Combination to and from the TACP Authorized Service
Station.
For additional information, visit TACP's website:
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED
WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE
LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES,
GUARANTEES, AGREEMENTS, AND SIMILAR
OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR
OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, LOST PROFITS, BUSINESS INTERRUPTION, OR
MODIFICATION OR ERASURE OF RECORDED DATA
CAUSED BY USE, MISUSE OR INABILITY TO USE THIS
TV COMBINATION).
No person, agent, distributor, dealer or company is authorized
to change, modify or extend the terms of these warranties in
any manner whatsoever. The time within which an action
must be commenced to enforce any obligation of TACP arising
under the warranty or under any statute, or law of the United
States or any state thereof, is hereby limited to ninety (90)
days from the date you discover or should have discovered,
the defect. This limitation does not apply to implied warranties
arising under the law of any state of the U.S.A.
50
5S00201A [E] (P49-Back)
50
4/1/05, 3:18 PM
Memo
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
Others
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
51
5S00201A [E] (P49-Back)
51
4/1/05, 3:18 PM
Printed in Thailand
5S00201A [E] (P49-Back)
52
4/1/05, 3:18 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement