Grace Design FELiX Guide

FELiX connections
Nothing too terribly hard and fast here - just the basics about how to plug stuff in and out of
your preamp. INPUT paths are shown in amber. OUTPUT paths are shown in green.
There are many ways to connect a huge array of instrument sources to FELiX. If you aren’t
sure about how something works, please have a look at your owner’s manual, check out our
website - www.gracedesign.com - or feel free to call us. We are always glad to help out in any
way we can. 1.303.823.8100, M-F, 9-5 MST
A
out
input
tuner
external
footswitch
acoustic or electric instruments with pickups or internal mics plug into Ch1 or Ch2 inputs
plug FELiX into nice,
clean AC power
external footswitch to
control mute and boost
stage tuner
fed by tuner out
side panel headphone jack
PUSH
FOH mixer fed by DI 1 output. Sourced by mix or Ch1
instrument mic, vocal mic
plugged into mic input 1
monitor mixer, recorder, workstation, yadda fed by DI 2 output. Sourced by mix or Ch2
external effects routed
through the insert
stage amp fed by amp out
amp
input
out
input
reverb