TABLE OF CONTENTS 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior features Air conditioning and audio systems, as well as other interior features for a comfortable driving experience. 4 Maintenance and care Cleaning and protecting your vehicle, performing do-it-yourself maintenance, and maintenance information. 5 When trouble arises What to do if the vehicle needs to be towed, gets a flat tire, or is involved in an accident. 6 Vehicle specifications Detailed vehicle information. 7 For US owners Reporting safety defects for US owners Index Alphabetical listing of information contained in this manual. TABLE OF CONTENTS 1 Index Before driving 1-5. Refueling........................................ 47 Opening the fuel tank cap........... 47 1-1. Key information .............................. 2 1-6. Anti-theft system ........................ 50 Keys ......................................................... 2 Engine immobilizer system........ 50 Alarm.................................................... 52 Theft prevention labels (U.S.A.)............................................. 54 1-2. Opening, closing and locking the doors and trunk ..................... 4 Smart access system with push-button start ............................. 4 Wireless remote control ............... 12 Doors..................................................... 15 Trunk...................................................... 19 1-7. Safety information....................... 55 Correct driving posture ............... 55 SRS airbags ....................................... 57 Child restraint systems ................. 68 Installing child restraints................. 71 1-3. Adjustable components ............ 22 Front seats.......................................... 22 Driving position memory ............. 24 Seat position memory ................... 27 Head restraints................................. 29 Seat belts ........................................... 30 Steering wheel (manually adjustable type) ....... 36 Steering wheel (power-adjustable type)............ 37 Anti-glare inside rear view mirror ............................................... 38 Outside rear view mirrors........... 39 1-4. Opening and closing the windows and moon roof ........... 41 Power windows................................. 41 Moon roof .......................................... 44 2 When driving 2-1. Driving procedures.................... 82 Driving the vehicle.......................... 82 Starting the engine ......................... 89 Automatic Transmission .............. 92 Manual Transmission..................... 96 Turn signal lever............................... 98 Parking brake ................................... 99 2-2. Instrument cluster ..................... 100 Gauges and meters ..................... 100 Indicators and warning lights................................................. 106 Multi-information display........... 109 2-3. Operating the lights and windshield wipers..................... 113 Headlight switch.............................. 113 Fog light switch ................................ 116 Windshield wipers and washer............................................... 117 Headlight cleaner switch ........... 120 2-4. Using other driving systems..... 121 Cruise control .................................. 121 Dynamic radar cruise control............................................. 124 Lexus parking assist-sensor...... 133 Driving assist systems.................. 139 PCS (Pre-Collision System)........................................... 144 2-5. Driving information ................... 147 Cargo and luggage...................... 147 Vehicle load limits......................... 150 Winter driving tips .......................... 151 Trailer towing.................................. 156 Dinghy towing (vehicles with an automatic transmission) ................................ 157 Dinghy towing (vehicles with a manual transmission) ................................ 158 3 Interior features 3-1. Using the air conditioning 1 system and defogger.............. 162 Automatic air conditioning system ............................................. 162 Rear window and outside rear 2 view mirror defoggers ............. 170 3-2. Using the audio system.............. 171 Audio system type .......................... 171 3 Using the radio................................ 174 Using the CD player..................... 181 Playing back MP3 and WMA discs................................... 187 4 Optimal use of the audio system ............................................. 195 Using the AUX adapter............. 198 5 Using the steering wheel audio switches ............................. 199 3-3. Using the interior lights........... 201 Interior lights list............................. 201 6 • Interior lights and personal lights ............................ 203 3-4. Using the storage features.... 205 7 List of storage features ............. 205 • Glove box ................................... 205 • Console boxes ........................... 206 • Overhead console ................... 207 • Cup holders................................ 208 TABLE OF CONTENTS Index • Bottle holders/door pockets ......................................... 209 4-2. Maintenance.............................. 249 Maintenance requirements ..... 249 General maintenance................. 251 Emission inspection and maintenance (I/M) programs ...................................... 254 3-5. Other interior features............. 211 Sun visors............................................ 211 Vanity mirror................................... 212 Clock.................................................. 213 Satellite switches ........................... 214 Ashtrays ............................................ 217 Cigarette lighter ............................ 218 Power outlet.................................... 219 Seat heaters.................................... 220 Seat heaters and ventilators .... 222 Armrest ............................................ 224 Rear sunshade............................... 225 Extended trunk.............................. 227 Coat hooks ..................................... 228 Floor mat.......................................... 229 Trunk features............................... 230 Garage door opener.................. 233 Compass......................................... 238 4 4-3. Do-it-yourself maintenance............................ 255 Do-it-yourself service precautions.................................. 255 Hood................................................. 258 Positioning the jack ..................... 259 Engine compartment................... 261 Tires ................................................... 275 Tire inflation pressure................ 285 Wheels............................................. 289 Air conditioning filter................... 291 Electronic key battery ................ 293 Checking and replacing fuses................................................ 295 Headlight aim................................ 309 Light bulbs........................................ 310 Maintenance and care 5 When trouble arises 4-1. Maintenance and care............ 244 Cleaning and protecting the vehicle exterior................... 244 Cleaning and protecting the vehicle interior .................... 246 5-1. Essential information................ 318 If your vehicle needs to be towed ........................................ 318 If you think something is wrong ............................................. 325 Fuel pump shut off system ........ 326 Event data recorder.................... 327 5-2. Steps to take in an emergency .............................. 329 If a warning light turns on or a warning buzzer sounds....... 329 If a warning message is displayed....................................... 334 If you have a flat tire.................... 348 If the engine will not start .......... 356 If the shift lever cannot be shifted from P.............................. 357 If you lose your keys................... 358 When the electronic key battery is discharged ............... 359 If the vehicle battery is discharged ................................... 362 If your vehicle overheats ........... 365 If the vehicle becomes stuck................................................ 367 6 Vehicle specifications 6-3. Initialization ............................... 399 Items to initialize ........................... 399 7 For US owners 1 Reporting safety defects for U.S.A. owners...................... 402 2 Index Alphabetical index.............................. 404 3 What to do if........................................... 413 4 5 6 6-1. Specifications............................ 370 Maintenance data........................ 370 Fuel information........................... 384 Tire information............................. 387 6-2. Customization .......................... 395 Customizable features .............. 395 7 Pictorial index Exterior Windshield wipers P. 117 Parking lights P. 113 Moon roof P. 44 Outside rear view mirrors P. 39 Hood P. 258 Side marker lights P. 113 Headlights (low and high beam) P. 113 Fog lights P. 116 Turn signal lights P. 98 Headlights (high beam) P. 113 Rear window defogger P. 170 Side marker lights P. 113 Tail lights P. 113 Doors Tires ●Rotation ●Replacement ●Inflation pressure ●Information P. 15 Trunk P. 19 P. 275 P. 348 P. 378 P. 387 Turn signal lights P. 98 Fuel filler door P. 47 : If equipped Pictorial index Interior Seat belts P. 30 Bottle holders/door pockets P. 209 Head restraints P. 29 Floor mat P. 229 Power window switches P. 41 Driver airbag P. 57 Knee airbags P. 57 A Front passenger airbag P. 57 Armrest P. 224 Console box P. 206 Cup holders P. 208 Ashtrays P. 217 Power outlet P. 219 Front seats P. 22 Cup holders P. 208 SRS side airbags P. 57 Console box P. 206 A Anti-glare inside rear view mirror P. 38 Personal lights P. 203 Moon roof switch P. 44 Interior lights P. 203 Personal lights P. 203 Interior lights P. 203 Coat hooks P. 228 SRS curtain shield airbags P. 57 Vanity mirrors P. 212 Sun visors P. 211 Garage door opener switches P. 233 Compass P. 238 : If equipped Pictorial index Interior B Driving position memory switches P. 24 Seat position memory switches P. 27 Door lock switch P. 15 Outside rear view mirror switches P. 39 Window lock switch P. 41 Power window switches P. 41 C Automatic transmission Automatic transmission shift lever P. 92 Seat heater switches P. 220 Seat heater/ventilator switches P. 222 Shift lock override button P. 357 Cigarette lighter P. 218 Ashtrays P. 217 Manual transmission Manual transmission shift lever P. 96 Parking brake lever P. 99 Cigarette lighter P. 218 Ashtrays P. 217 Seat heater switches P. 220 Seat heater/ventilator switches P. 222 : If equipped Pictorial index Headlight switch P. 113 Turn signal lever P. 98 Fog light switch P. 116 Instrument panel Shift paddle switches Gauges and meters Multi-information display Windshield wipers and washer switch Engine switch P. 94 P. 100 P. 109 P. 117 P. 89 Trunk opener main switch P. 19 Glove box P. 205 Tilt and telescopic steering lock release lever P. 36 Tilt and telescopic steering control switch P. 37 Parking brake pedal (automatic transmission) P. 99 Audio remote control switches P. 199 A Without navigation system Air conditioning system P. 162 Rear window and outside rear view mirror defoggers P. 170 Audio system P. 171 Clock P. 213 Security indicator P. 50, 52 Emergency flashers With navigation system Navigation system*1 Clock P. 213 Rear window and outside rear view mirror defoggers*1 Security indicator P. 50, 52 Air conditioning system*1 Audio system*1 Emergency flashers : If equipped *1: Refer to “Navigation System Owner's Manual”. Pictorial index Instrument panel B Without navigation system With navigation system Telephone switch*1 DISP switch P. 110 DISP switch P. 110 Distance switch Distance switch P. 124 P. 124 Cruise control switch P. 121, 124 Cruise control switch P. 121, 124 Speech command switch*1 C Automatic transmission Manual transmission TRAC OFF switch P. 141 TRAC OFF switch P. 141 ECT switch P. 93 ETCS switch P. 96 D Rear sunshade switch P. 225 Headlight cleaner switch P. 120 Instrument panel light control dial P. 101 Satellite switches P. 214 Trunk opener Fuel filler door opener P. 19 P. 47 : If equipped *1: Refer to “Navigation System Owner's Manual”. For your information Main Owners Manual Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may find some explanations for equipment not installed on your vehicle. All specifications provided in this manual are current at the time of printing. However, because of the Lexus policy of continual product improvement, we reserve the right to make changes at any time without notice. Depending on specifications, the vehicle shown in the illustration may differ from your vehicle in terms of color and equipment. Accessories, spare parts and modification of your Lexus A wide variety of non-genuine spare parts and accessories for Lexus vehicles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Lexus vehicle. This vehicle should not be modified with non-genuine Lexus products. Modification with non-genuine Lexus products could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems resulting from the modification may not be covered under warranty. Installation of a mobile two-way radio system As the installation of a mobile two-way radio system in your vehicle could affect electronic systems such as the multiport fuel injection system/sequential multiport fuel injection system, cruise control system, anti-lock brake system, SRS airbag system and seat belt pretensioner system, be sure to check with your Lexus dealer for precautionary measures or special instructions regarding installation. Scrapping of your Lexus The SRS airbag and seat belt pretensioner devices in your Lexus contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire. Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Lexus dealer before you scrap your vehicle. CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influence of alcohol or drugs that have impaired you ability to operate your vehicle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that will hurt or kill you, your occupants or others. Defensive driving: Always drive defensively. Anticipate mistakes that other drivers or pedestrians might make and be ready to avoid accidents. Driver distraction: Always give your full attention to driving. Anything that distracts the driver, such as adjusting controls, talking on a cellular phone or reading can result in a collision with resulting death or serious injury to you, your occupants or others. ■ When children are in the vehicle Never leave children unattended in the vehicle. When left unattended, children may be able to start the vehicle or shift the vehicle into neutral. There is also a danger that children may injure themselves by playing with the cigarette lighter, the windows, the moon roof, or other features of the vehicle. In addition, heat build-up or extremely cold temperatures inside the vehicle can be fatal to children. Symbols used throughout this manual Cautions & Notices CAUTION This is a warning against anything which may cause injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to yourself and others. NOTICE This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Lexus and its equipment. Safety symbol Throughout this manual, you will also see the symbol of a circle with a slash through it. This means "Do not", "Do not do this", or "Do not let this happen". Before driving 1-1. Key information............................ 2 Keys....................................................... 2 1 1-4. Opening and closing the windows and moon roof ........ 41 Power windows............................... 41 1-2. Opening, closing and locking the doors and trunk................... 4 Moon roof ....................................... 44 Smart access system with push-button start.......................... 4 1-5. Refueling..................................... 47 Opening the fuel tank cap ........ 47 Wireless remote control............. 12 Doors.................................................. 15 1-6. Anti-theft system ...................... 50 Trunk ................................................... 19 Engine immobilizer system...... 50 Alarm ................................................ 52 1-3. Adjustable components.......... 22 Front seats ....................................... 22 Theft prevention labels (U.S.A.).......................................... 54 Driving position memory .......... 24 Seat position memory ................ 27 1-7. Safety information.................... 55 Head restraints.............................. 29 Correct driving posture ............ 55 Seat belts ......................................... 30 SRS airbags .................................... 57 Steering wheel (manually adjustable type) .... 36 Child restraint systems .............. 68 Installing child restraints.............. 71 Steering wheel (power-adjustable type) ......... 37 Anti-glare inside rear view mirror ............................................. 38 Outside rear view mirrors ........ 39 1 1-1. Key information Keys The following keys are provided with the vehicle. Electronic keys • Operating the smart access system with push-button start (P. 4) • Operating the wireless remote control function (P. 12) Mechanical keys Key number plate Using the mechanical key Take out the mechanical key. ■ When required to leave a key to the vehicle with a parking attendant Turn the trunk opener main switch OFF and lock the glove box as circumstances demand. (P. 19, 205) Remove the mechanical key for your own use and provide the attendant with the electronic key only. ■ Key number plate Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a mechanical key is lost, a new key can be made at your Lexus dealer using the key number plate. (P. 358) 2 1-1. Key information NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high temperatures by placing them in direct sunlight, or get them wet. 1 ● Do not expose the keys to electromagnetic materials or attach any material that Before driving blocks electromagnetic waves to the key surface. 3 1-2. Opening, closing and locking the doors and trunk Smart access system with push-button start The following operations can be performed simply by carrying the electronic key, for example in your pocket. Locks and unlocks the doors (P. 5) Unlocks the trunk (P. 5) Starts and stops the engine (P. 89) 4 1-2. Opening, closing and locking the doors and trunk Locking and unlocking the doors (front door handles only) Press the lock button to lock the door. 1 Before driving Grip the handle to unlock the door. Make sure to touch the sensor on the back of the handle. The door cannot be unlocked for 3 seconds after the door is locked. Unlocking the trunk Press the button to unlock the trunk. 5 1-2. Opening, closing and locking the doors and trunk ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Conditions affecting operation The smart access system with push-button start and wireless remote control function may not operate normally in the following situations. ● Near a TV tower, radio station, electric power plant, airport or other facility that generates strong radio waves ● When carrying a portable radio, cellular phone or other wireless communica- tion device ● When multiple electronic keys are in the vicinity ● When the electronic key has come into contact with, or is covered by a metallic object ● When a wireless key (that emits radio waves) is being used nearby ● When the electronic key has been left near an electrical appliance such as a personal computer ■ Switching the door unlock function It is possible to set which doors the entry function unlocks. STEP 1 Turn the engine switch OFF. STEP 2 When the indicator on the key surface is turned off, push and hold the 6 , , or for approximately 5 seconds while pushing button on the key. 1-2. Opening, closing and locking the doors and trunk The setting changes each time an operation is performed, as shown below. (Wait for at least 5 seconds after each operation to continue an operation.) Multi-information display Unlocking doors Beep 1 Before driving Hold the driver's door handle to unlock only the driver's Exterior: Beeps three door. times Hold the front passenger’s Interior: Pings once door handle to unlock all doors Hold either front door handle Exterior: Beeps twice to unlock all doors Interior: Pings once ■ Battery-saving function In the following circumstances, the entry function is disabled in order to prevent the vehicle and electronic key batteries from discharging. ● When the entry function has not been used for 2 weeks or more ● When the electronic key has been left within approximately 3 ft. (1 m) of the vehicle for 10 minutes or more The system will resume operation when... ● The vehicle is locked using the door handle lock switch ● The vehicle is locked/unlocked using the wireless remote control function (P. 12) ● The vehicle is locked/unlocked using the mechanical key (P. 359) 7 1-2. Opening, closing and locking the doors and trunk ■ Electronic key battery depletion ● The standard battery life is 1 to 2 years. (The battery becomes depleted even if the electronic key is not used.) If the smart access system with push-button start or the wireless remote control function does not operate, or the detection area becomes smaller, the battery may be depleted. Replace the battery when necessary. ( P. 293) ● To avoid serious deterioration, do not leave the electronic key within 3 ft. (1 m) of the following electrical appliances. • • • • TVs Personal computers Recharging cellular phones or cordless phones Table lamps ■ To operate the system properly Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle. Depending on the position and holding condition of the electronic key, the key may not be detected correctly and the system may not operate properly. (The alarm may go off accidentally, or the door lock prevention may not function.) ■ Note for the entry function ● The doors may unlock if a large amount of water splashes on the door handle, such as in the rain or in a car wash. (The doors will automatically be locked after approximately 30 seconds if the doors are not opened and closed.) ● Gripping the door handle when wearing a glove may not unlock the door. ● If the wireless remote control is used to lock the doors when the electronic key is near the vehicle, there is a possibility that the door may not be unlocked by the entry function. (Use the wireless remote control to unlock the doors.) ■ When the vehicle is not driven for extended periods To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2 m) of the vehicle. ■ Security feature If a door is not opened within approximately 30 seconds after the vehicle is unlocked, the anti-theft system automatically locks the vehicle again. 8 1-2. Opening, closing and locking the doors and trunk ■ Alarms and warning indicators A combination of exterior and interior alarms as well as warnings displayed on the multi-information display are used to prevent theft of the vehicle and unforeseeable accidents resulting from erroneous operation. Take appropriate measures in response to any warning indications on the multi-information display. (P. 334) Alarm Exterior alarm sounds once for 2 seconds Situation Correction procedure Tried to lock the doors using the entry function while the electronic key is still inside the passenger compartment Retrieve the electronic key from the passenger compartment and lock the doors again. Tried to exit the vehicle with Turn the engine switch the electronic key and lock OFF and lock the doors the doors without first turning again. the engine switch OFF Closed the trunk while the electronic key is still inside and all doors are locked Retrieve the electronic key from the trunk and close the trunk lid. Exterior alarm Tried to lock the vehicle using Close all of the doors sounds once for 10 the entry function while a and lock the doors seconds door is open again. Interior alarm sounds continuously* Tried to open the door and exit the vehicle without shifting the shift lever to P Shift the shift lever to P. 9 Before driving The following table describes circumstances and correction procedures when only alarms are sounded. 1 1-2. Opening, closing and locking the doors and trunk Alarm Situation Correction procedure Switched to ACC mode while the driver's door is Turn the engine switch open (Opened the driver's OFF and close the door when the engine switch driver's door. Interior alarm pings is in ACC mode.) continuously Turned the engine switch OFF while the driver's door is Close the driver's door. open *: Vehicles with an automatic transmission only ■ When the electronic key battery is fully depleted ● Locking and unlocking the doors and trunk: Use the mechanical key. (P. 359) ● Starting the engine: P. 89 ● Replacing the battery: P. 293 ■ Customization It is possible to deactivate systems such as the smart access system with push-button start. (P. 395) ■ Certification for the smart access system with push-button start For vehicles sold in the U.S.A. FCC ID: NI4TMLF-1 NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 10 1-2. Opening, closing and locking the doors and trunk ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For vehicles sold in Canada NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAUTION ■ Caution regarding interference with electronic devices Electromagnetic waves may affect electronic medical equipment, such as cardiac pacemakers. Contact the electronic medical equipment manufacturer for details before use. 11 1 Before driving NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1-2. Opening, closing and locking the doors and trunk Wireless remote control The wireless remote control can be used to lock and unlock the vehicle and the trunk from outside the vehicle. Locks all doors Unlocks all doors Opens the windows and moon roof (push and hold) Unlocks the trunk (push and hold) Sounds alarm (push and hold) (P. 52) ■ 2-step unlocking function When you push the button, the driver's door is unlocked. Pushing the button again within 3 seconds unlocks the other doors. ■ Operation signals Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) Trunk: A buzzer sounds to indicate that the trunk has been unlocked. Windows and moon roof: A buzzer sounds continuously while the windows and moon roof are being opened. ■ Door lock buzzer If a door is not fully closed, a buzzer sounds continuously if an attempt to lock the door is made. Fully close the door to stop the buzzer, and lock the vehicle once more. ■ Electronic key battery depletion P. 8 ■ Security feature P. 8 ■ When the electronic key battery is fully depleted P. 10 12 1-2. Opening, closing and locking the doors and trunk ■ Conditions affecting operation P. 6 ■ Customization Settings (e.g. trunk unlocking function) can be changed. (P. 395) 1 ■ Certification for wireless remote control FCC ID: NI4TMLF-1 NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 13 Before driving For vehicles sold in the U.S.A. 1-2. Opening, closing and locking the doors and trunk For vehicles sold in Canada NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 14 1-2. Opening, closing and locking the doors and trunk Doors The vehicle can be locked and unlocked using the entry function, wireless remote control or door lock switch. ■ Entry function P. 5 1 Before driving ■ Wireless remote control P. 12 ■ Door lock switch Locks all doors Unlocks all doors ■ Inside lock button Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position. Locking the front doors from the outside without a key The door cannot be locked if the engine switch is in ACC or IG-ON mode, or the electronic key is left inside the vehicle. Depending on the position of the electronic key, the key may not be detected correctly and the door may be locked. 15 1-2. Opening, closing and locking the doors and trunk Rear door child-protector lock The door cannot be opened from inside the vehicle when the locks are set. These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors. Automatic door locking and unlocking systems The following functions can be set or cancelled: Function Operation Shift position linked door locking function* Shifting the shift lever out of P locks all doors. Shift position linked door unlocking function* Shifting the shift lever to P unlocks all doors. Speed linked door locking function All doors are locked when the vehicle speed is approximately 12 mph (20 km/h) or higher. Driver's door linked door unlocking function All doors are unlocked when the driver's door is opened within 10 seconds after turning the engine switch OFF. *: Vehicles with an automatic transmission only 16 1-2. Opening, closing and locking the doors and trunk ■ Setting and canceling the functions To switch between setting and canceling, follow the procedure below: STEP 1 STEP 2 The shift lever and switch positions corresponding to the desired function to be set or canceled are shown as follows. Function Shift position linked door locking function Shift position linked door unlocking function Shift lever position Switch position P Speed linked door locking function Driver's door linked door unlocking function N When the setting or canceling operation is complete, all doors are locked and then unlocked. 17 1 Before driving Close all the doors and switch the engine switch to IG-ON mode. (Perform the step 2 within 10 seconds.) Shift the shift lever to P or N, and press and hold the driver's door lock switch ( or ) for 5 seconds. 1-2. Opening, closing and locking the doors and trunk ■ Impact detection door lock release system In the event that the vehicle is subject to a strong impact, all the doors are unlocked. Depending on the force of the impact or the type of accident, however, the system may not operate. ■ Using the mechanical key The doors can also be locked and unlocked with the mechanical key. (P. 359) ■ Customization Settings (e.g. unlocking function using a key) can be changed. (P. 395) CAUTION ■ To prevent an accident Observe the following precautions while driving the vehicle. Failing to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ● Always use a seat belt. ● Always lock all doors. ● Ensure that all doors are properly closed. ● Do not pull the inside handle of the front door while driving. ● Set the rear door child protector locks when children are seated in the rear seat. 18 1-2. Opening, closing and locking the doors and trunk Trunk The trunk can be opened using the trunk opener, entry function or wireless remote control. ■ Trunk opener 1 Release the trunk lid. Before driving ■ Entry function P. 5 ■ Wireless remote control P. 12 Locking the trunk opener feature Turn the main switch in the glove box OFF to disable the trunk opener. ON OFF The trunk lid cannot be opened even with the wireless remote control or the entry function. 19 1-2. Opening, closing and locking the doors and trunk ■ Trunk light When the trunk light switch is set to ON, the trunk light turns on when the trunk is opened. ON OFF ■ Trunk handle Use the trunk handle when closing the trunk. ■ Internal trunk release lever The trunk lid can be opened by pulling down on the glow-in-the-dark lever located on the inside of trunk lid. The lever will continue to glow for some time after the trunk lid is closed. ■ Using the mechanical key The trunk can be also opened using the mechanical key. (P. 359) 20 1-2. Opening, closing and locking the doors and trunk CAUTION ■ Caution while driving Keep the trunk lid closed. This not only keeps personal belongings from being thrown out, but also prevents exhaust gases from entering the vehicle. Never leave children unattended in the vehicle as they may lock themselves in the vehicle or trunk, which could cause the child to overheat or suffocate, resulting in death or serious injury. 21 Before driving ■ When children are in the vehicle 1 1-3. Adjustable components Front seats Manual seat Seat position lever Seatback angle lever Vertical height adjustment lever Seat cushion (front) angle knob 22 1-3. Adjustable components Power seat 1 Before driving Seat position switch Seatback angle switch Seat cushion (front) angle switch Vertical height adjustment switch Lumbar support switch CAUTION ■ Seat adjustment Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident. 23 1-3. Adjustable components Driving position memory (if equipped) Your preferred driving position (the position of the driver's seat, steering wheel and outside rear view mirrors) can be entered into the computer's memory and recalled with the touch of a button. It is also possible to set this function to activate automatically when the doors are unlocked. Three different driving positions can be entered into memory. ■ Entering a position to memory Vehicles with an automatic transmission: Check that the shift lever is set in P. Vehicles with a manual transmission: Check that the parking brake is set. STEP 1 STEP 2 STEP 3 Switch to IG-ON mode. Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the desired positions. While pushing the SET button, push button 1, 2 or 3 until the signal beeps. If the selected button has already been preset, the previously recorded position will be overwritten. 24 1-3. Adjustable components ■ Recalling the memorized position Vehicles with an automatic transmission: Check that the shift lever is set in P. Vehicles with a manual transmission: Check that the parking brake is set. STEP 2 Switch to IG-ON mode. Before driving STEP 1 1 Push button 1, 2 or 3 to recall the desired position. Linking driving position memory with door unlock operation Record your driving position to button 1, 2 or 3 before performing the following. STEP 1 STEP 2 Turn the engine switch OFF and close the driver's door. Press and hold the desired button (1, 2 or 3) while pressing the or button on the wireless remote control until the signal beeps. The driving position is recalled when the driver's door is unlocked using the entry function or wireless remote control and the driver’s door is opened. 25 1-3. Adjustable components ■ Canceling the linked door unlock operation STEP 1 Turn the engine switch OFF and close the driver's door. STEP 2 While pushing the SET button, push the or button on the wireless remote control until the signal beeps. ■ Retained accessory power Memorized positions (except for the steering wheel positions) can be activated up to 30 seconds after the driver's door is opened, even after turning the engine switch OFF. ■ To cancel seat position recall Perform any of the following operations. ● Push the SET button. ● Push button 1, 2, or 3. ● Adjust the seat using the switches (only cancels seat position recall). ■ If the battery is disconnected The memorized positions must be reset because the computer's memory is erased when the battery is disconnected. CAUTION ■ Seat adjustment caution Take care during seat adjustment that the seat does not strike the rear passenger or squeeze your body against the steering wheel. 26 1-3. Adjustable components Seat position memory (if equipped) Your preferred front passenger seat position can be entered into the computer's memory and recalled with the touch of a button. Three different seat positions can be entered into memory. 1 STEP 1 STEP 2 STEP 3 Before driving ■ Entering a position to memory Vehicles with an automatic transmission: Check that the shift lever is set in P. Vehicles with a manual transmission: Check that the parking brake is set. Switch to IG-ON mode. Adjust the front passenger seat to the desired position. While pushing the SET button, push button 1, 2 or 3 until the signal beeps. If the selected button has already been preset, the previously recorded position will be overwritten. ■ Recalling the memorized position Vehicles with an automatic transmission: Check that the shift lever is set in P. Vehicles with a manual transmission: Check that the parking brake is set. Push button 1, 2 or 3 to recall the desired position. 27 1-3. Adjustable components ■ Retained accessory power Memorized position can be activated up to 30 seconds after the front passenger door is opened, even after turning the engine switch OFF. ■ To cancel seat position recall Perform any of the following operations. ● Push the SET button. ● Push button 1, 2, or 3. ● Adjust the seat position using the switches. ■ If the battery is disconnected The memorized positions must be reset because the computer's memory is erased when the battery is disconnected. CAUTION ■ Seat adjustment caution Take care during seat adjustment that the seat does not strike the rear passenger. 28 1-3. Adjustable components Head restraints Vertical adjustment Push and hold the lock release button when lowering the head restraint. Removal Before driving Lock release button 1 Pull the head restraint up while pushing the lock release button. ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the rear seat head restraints Always raise the head restraint one level from the stowed position when using. ■ Head restraints of different seats The head restraints are specially designed for the seats on which they are installed. CAUTION ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Adjust the head restraints to the correct position at all times. ● Do not drive with the head restraints removed. 29 1-3. Adjustable components Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder. ● Position the lap belt as low as possible over the hips. ● Adjust the position of the seatback. Sit up straight and well back in the seat. ● Do not twist the seat belt. ■ Fastening and releasing the seat belt Fastening the belt Push the tab into the buckle until a clicking sound is heard. Releasing the belt Press the release button. Release button 30 1-3. Adjustable components ■ Adjusting the height of the belt (front seats) Down Up 1 Before driving Move the height adjuster up and down as needed until you hear a click. Seat belt comfort guide (outside rear seats) If the shoulder belt sits close to a person’s neck, slide the seat belt comfort guide forward. Seat belt pretensioners (front and outside rear seats) The pretensioner helps the seat belt to quickly restrain the occupant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision. The pretensioner may not activate in the event of a minor frontal impact, a side impact or a rear impact. 31 1-3. Adjustable components Pre-collision seat belts (front seats of vehicles with pre-collision system) When the pre-collision sensor detects an obstacle and determines that a collision is unavoidable, the seat belts lessen collision injury by retracting the slack in the front seat belts before the collision, thus restraining the driver and passenger at an earlier stage. The seat belts will also operate in the event of sudden braking. (P. 144) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully. ■ Automatic locking retractor (ALR) When a passenger's shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended. This feature is used to hold the CRS firmly. To free the belt again, fully retract the belt and then pull the belt out once more. (P. 71) ■ Pregnant women Obtain medical advice and wear the seat belt in the proper way. (P. 30) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occupants. Extend the shoulder belt completely over the shoulder and position the belt across the chest. Avoid belt contact over the rounding of the abdominal area. If the seat belt is not worn properly, not only a pregnant woman, but also the fetus could suffer death or serious injury as a result of sudden braking or a collision. 32 1-3. Adjustable components ■ People suffering illness Obtain medical advice and wear the seat belt in the proper way. ■ Child seat belt usage The seat belts of your vehicle were principally designed for persons of adult size. ● Use a child restraint system appropriate for the child, until the child become ● When the child becomes large enough to properly wear the vehicle's seat belt, follow the instructions on P. 30 regarding seat belt usage. ■ Replacing the belt after the pretensioner has been activated The seat belts cannot be used after a pretensioner has been activated. After an accident, have your Lexus dealer inspect the pretensioners. Make sure the pretensioners are replaced if they have been activated. ■ Seat belt extender If your seat belts cannot be fastened securely because they are not long enough, a personalized seat belt extender is available from your Lexus dealer free of charge. 33 Before driving large enough to properly wear the vehicle's seat belt. (P. 68) 1 1-3. Adjustable components CAUTION ■ Wearing a seat belt Observe the following precautions to reduce the risk of injury in the event of sudden braking or an accident. Failing to do so may cause death or severe injury. ● Ensure that all passengers wear a seat belt. ● Always wear a seat belt properly. ● Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Lexus recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ● Do not recline the seat any more than necessary to achieve a proper seating position. The seat belt is most effective when the occupants are sitting up straight and well back in the seats. ● Do not wear the shoulder belt under your arm. ● Always wear your seat belt low and snug across your hips. ■ Seat belt damage and wear ● Do not to damage the seat belts by allowing the belt, plate, or buckle to be jammed in the door. ● Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do not use a damaged seat belt until it is replaced. Damaged seat belts cannot protect an occupant from injury. ● Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Lexus dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there's no obvious damage. ● Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by your Lexus dealer. Inappropriate handling of the pretensioner may prevent it from operating properly resulting in death or serious injury. 34 1-3. Adjustable components CAUTION ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. 1 ● Do not use the seat belt extender when installing a child restraint system because ● The personalized extender may not be safe on another vehicle, when used by another person, or at a different seating position other than the one originally intended. NOTICE ■ When using a seat belt extender When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself. 35 Before driving the belt will not securely hold the child restraint system, increasing the risk of death or injury in the event of a collision. 1-3. Adjustable components Steering wheel (manually adjustable type) The steering wheel can be adjusted to a comfortable position. STEP 1 STEP 2 STEP 3 Hold the steering wheel and press the lever down. Adjust to the ideal position by moving the steering wheel horizontally and vertically. Pull the lever up. CAUTION ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident. 36 1-3. Adjustable components Steering wheel (power-adjustable type) The steering wheel can be adjusted to a comfortable position while the engine switch is in ACC or IG-ON mode. Up Down Away from the driver Toward the driver 1 Before driving Auto tilt away When the engine switch is turned OFF, the steering wheel returns to its stowed position by moving up and away to enable easier driver entry and exit. Switching to ACC or IG-ON mode will return the steering wheel to the original position. CAUTION ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury. 37 1-3. Adjustable components Anti-glare inside rear view mirror In the AUTO mode, sensors are used to detect the headlights of vehicles behind and automatically reduces the reflected light. Turns AUTO mode ON/OFF The indicator comes on when AUTO mode is turned ON. The anti-glare mirror default mode is AUTO. The anti-glare mirror is automatically set to AUTO whenever the engine switch is turned on. ■ To prevent sensor error To ensure that the sensors operate properly, do not touch or cover it. CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury. 38 1-3. Adjustable components Outside rear view mirrors Mirror angle can be adjusted using the switch when the engine switch is in ACC or IG-ON mode. Select a mirror to adjust (L: left or R: right) Adjust the mirror up, down, in, or out using the switch 1 Before driving ■ When the mirrors are fogged up Turn on the mirror heaters to defog the mirrors. (P. 170) ■ Folding back the mirrors Push back in the direction of the vehicle's rear. ■ One-touch adjustment of the mirror angle (vehicles with driving position memory) A desired mirror face angle can be entered to memory and adjusted with the touch of a button. (P. 24) 39 1-3. Adjustable components ■ Linked mirror function when reversing (vehicles with driving position memory) The outside rear view mirrors will automatically angle downwards when the vehicle is reversing in order to give a better view of the ground. However, this function will not operate when the mirror select switch is in the neutral position (between L and R). ■ Auto anti-glare function (vehicles with sports or luxury package) When the anti-glare inside rear view mirror is set to AUTO mode, the outside rear view mirrors will activate in conjunction with the anti-glare inside rear view mirror to reduce reflected light. (P. 38) CAUTION ■ When driving the vehicle Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. ● Do not adjust the mirrors while driving. ● Do not drive with the mirrors folded back. ● Both the driver and passenger side mirrors must be extended and properly adjusted before driving. ■ When the mirror heaters are operating Do not touch the surface of the mirror, as it may be hot. 40 1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. Closing One-touch closing* Opening One-touch opening* 1 Before driving *: Pushing the switch in the oppo- site direction will stop window travel partway. Lock switch Press the switch down to lock passenger window switches. Use this switch to prevent children from accidentally opening or closing a passenger window. 41 1-4. Opening and closing the windows and moon roof ■ The power windows can be operated when The engine switch is in IG-ON mode. ■ Linked door lock window operation ● The power windows can be opened and closed using the mechanical key. (P. 359) ● The power windows can be opened using the wireless remote control. (P. 12) ■ Operating the power windows after turning the engine switch OFF The power windows can be operated for approximately 45 seconds even after the engine switch is switched to ACC mode or turned OFF. They cannot, however, be operated once either front door is opened. ■ Jam protection function If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly. ■ When the battery is disconnected The power windows must be initialized in order to ensure proper operation. (Perform for each window with the switch for each seat.) STEP 1 Open the window halfway. STEP 2 Fully close the window by pulling the switch up and continue holding the switch for one second. The indicator on the switch changes from a flashing pattern to being on when initial settings are complete. ■ Customization Settings (e.g. linked door lock operation) can be changed. (P. 395) 42 1-4. Opening and closing the windows and moon roof CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. 1 ● Check to make sure that all passengers do not have any part of their body in a ● Do not allow children to operate the power windows. Closing a power window on someone can cause serious injury, and in some instances, even death. ■ Jam protection function ● Never try jamming any part of your body to activate the jam protection function intentionally. ● The jam protection function may not work if something gets caught just before the window fully closes. 43 Before driving position where it could be caught when a window is being operated. 1-4. Opening and closing the windows and moon roof Moon roof (if equipped) Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Manually opening and closing Fully open Fully close The moon roof can be opened in 7 steps by changing the position of the switch. ■ One-touch open and close Open to step 6 While the moon roof is opening, pushing the switch will stop the moon roof operation partway. Any further opening must be performed manually, using the switch. After the operation stops, press the switch again to fully close the moon roof. ■ Tilt up and down Tilt up Tilt down Fully up/fully down. 44 1-4. Opening and closing the windows and moon roof ■ The moon roof can be operated when The engine switch is in IG-ON mode. ■ Linked door lock moon roof operation ● The moon roof can be opened and closed using the mechanical key. (P. 359) ■ Operating the moon roof after turning the engine switch OFF The moon roof can be operated for approximately 45 seconds even after the engine switch is switched to ACC mode or turned OFF. It cannot, however, be operated once either front door is opened. ■ Jam protection function If an object is detected between the moon roof and the frame while closing or tilting down, travel is stopped and the moon roof opens slightly. ■ If the moon roof can not be closed Pressing the switch of at roof. position for more than 10 seconds closes the moon ■ To reduce moon roof wind noise ● Drive with the moon roof switch in the position when you open and close the moon roof manually. ● Drive with the moon roof where it has stopped when opening and closing auto- matically. ■ Sunshade The sunshade can be opened and closed manually. However, the sunshade will open automatically when the moon roof is opened. ■ Customization Settings (e.g. linked door lock operation) can be changed. (P. 395) 45 Before driving ● The moon roof can be opened using the wireless remote control. (P. 12) 1 1-4. Opening and closing the windows and moon roof CAUTION ■ Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. ● Do not allow any passengers to put their hands or heads outside the vehicle while it is moving. ● Do not sit on top of the moon roof. ■ Closing the moon roof Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their bodies in a position where they could be caught when the moon roof is being operated. ● Do not allow children to operate the moon roof. Closing the moon roof on someone can cause death or serious injury. ■ Jam protection function ● Never try jamming any part of your body to activate the jam protection function intentionally. ● The jam protection function may not work if something gets caught just before the moon roof fully closes. 46 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Turn the engine switch OFF and ensure that all the doors and windows are closed. 1 STEP 1 Open the fuel filler door. STEP 2 Turn the fuel tank cap slowly to open. STEP 3 Hang the fuel tank cap on the back of the fuel filler door. Before driving ■ Opening the fuel tank cap 47 1-5. Refueling Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. ■ Fuel types Use unleaded gasoline. (91 Octane rating [Research Octane Number 96] or higher) ■ Fuel tank capacity Approximately 17.2 gal. (65 L, 14.3 Imp. gal.) ■ When the fuel filler door opener is inoperable The lever can be used to open the fuel filler door if the fuel filler door cannot be opened using the inside switch because the battery is discharged or for any other reason. 48 1-5. Refueling CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so, may result in death or serious injury. 1 ● Touch the vehicle or some other metal surface to discharge any static electricity. ● Always hold the grips on the fuel tank cap and turn it slowly to remove it. A whooshing sound may be heard when the fuel tank cap is loosened. Wait until the sound cannot be heard before fully removing the cap. In hot weather, pressurized fuel may spray out the filler neck and cause injury. ● Do not allow anyone that has not discharged static electricity from their bodies to come close to an open fuel tank. ● Do not inhale vaporized fuel. Fuel contains substances that are harmful if inhaled. ● Do not smoke while refueling the vehicle. Doing so may cause the fuel to ignite and cause a fire. ● Do not return to the vehicle or touch any person or object that is statically charged. This may cause static electricity to build up, resulting in a possible ignition hazard. ■ When replacing the fuel cap Do not use anything but a genuine Lexus fuel tank cap designed for your vehicle. Failure to do so may cause a fire or other incident which may result in death or serious injury. NOTICE ■ Refueling Do not spill fuel during refueling. Failing to do so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface. 49 Before driving Sparks resulting from discharging static electricity may cause the fuel vapors to ignite. 1-6. Anti-theft system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. The indicator light flashes after the engine switch has been turned OFF to indicate that the system is operating. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ● If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle ■ Certifications for the engine immobilizer system For vehicles sold in the U.S.A. FCC ID: NI4TMIMB-1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For vehicles sold in Canada Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 50 1-6. Anti-theft system CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1 ■ To prevent damage to the key Do not modify, remove or disable the engine immobilizer system. If any unauthorized changes or modifications are made, the proper operation of the system cannot be guaranteed. 51 Before driving NOTICE 1-6. Anti-theft system Alarm The alarm is triggered if forcible entry is detected (horn, head lights, tail lights, interior lights and emergency flashers). To arm the alarm, exit the vehicle, make sure that the doors, trunk and hood are closed, and lock all the doors. The changes will begin operating automatically after 30 seconds. The indicator changes from being on to a flashing pattern when the system begins to operate. Deactivating or stopping the alarm Do one of the following: ● Unlock the doors or trunk using the entry function or the wireless remote door lock function. ● Start the engine. (The alarm will be deactivated or stopped after a few seconds.) ■ Items to check before locking the vehicle To prevent unintended triggering of the alarm, check that there is no one in the vehicle, and that all windows and moon roof are closed before locking the vehicle. 52 1-6. Anti-theft system ■ Alarm operation The alarm is triggered in the following situations ● A locked door or trunk is opened in any way other than using a wireless remote control, such as someone exiting the vehicle after the alarm is activated. 1 ● The hood is opened while the vehicle is locked. ■ When the battery is disconnected Be sure to cancel the alarm system. If the battery is discharged before canceling the alarm, the system may be triggered when the battery is reconnected. ■ Panic mode When is pushed for longer than about one second, the headlights/tail lights/emergency flashers will flash, the front and rear interior lights will come on, and an alarm will sound for about 60 seconds to deter any person from trying to break into or damage your vehicle. To stop the alarm, push any button on the wireless remote control. 53 Before driving ● The battery is reconnected. 1-6. Anti-theft system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. Do not remove under penalty of law. 54 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (P. 22) Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily depressed to the extent required. (P. 22) Adjust the seatback so that the controls are easily operable. Adjust the tilt and telescopic positions of the steering wheel downward so the airbag is facing your chest. (P. 36, 37) Lock the head restraint in place with the center of the head restraint closest to the top of your ears. (P. 29) Wear the seat belt correctly. (P. 30) 1 Before driving CAUTION ■ While driving ● Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle. 55 1-7. Safety information CAUTION ■ While driving ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger. ● Do not place anything under the front seats. Objects placed under the front seats may become jammed in the seat tracks and stop the seat from locking in place. This may lead to an accident. The adjustment mechanism may also be damaged. ■ Adjusting the seat position: ● Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat. ● Do not put your hands under the seat or near the moving parts to avoid injury. Fingers or hands may become jammed in the seat mechanism. 56 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. 1 Before driving Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front passenger from impact with interior components. Knee airbags Can help provide driver and front passenger protection. Side and curtain shield airbags Side airbags Can help protect the torso of the front seat occupants. Curtain shield airbags Can help protect primarily the head of outside occupants. 57 1-7. Safety information Airbag system components Knee airbags Front passenger airbag Curtain shield airbags Side airbags Side and curtain shield airbag sensors Curtain shield airbag sensors SRS warning light Driver airbag Driver's seat belt buckle switch Driver's seat position sensor Airbag sensor assembly Front airbag sensors The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and an airbag sensor. In certain types of severe frontal or side impacts, the SRS airbag system triggers the airbag inflators. A chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occupants. 58 1-7. Safety information ■ If the SRS airbags deploy (inflate) ● Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. 1 ● A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator) as ● The front windshield may crack. ■ Operating conditions (front airbags) ● The SRS front airbags will deploy if the severity of the frontal impact is above the designed threshold level, comparable to an approximate 15 mph (25 km/h) collision when the vehicle impacts straight into a fixed barrier that does not move or deform. However, this threshold velocity will be considerably higher if the vehicle strikes an object, such as a parked vehicle or sign pole, which can move or deform on impact, or if the vehicle is involved in an underride collision (e.g. a collision in which the front of the vehicle "underrides", or goes under, the bed of a truck, etc.). ● It is possible that in some collisions where the forward deceleration of the vehi- cle is very close to the designed threshold level, the SRS front airbags and the seat belt pretensioners may not activate together. ■ Operating conditions (side and curtain shield airbags) The SRS side airbags and curtain shield airbags are designed to inflate when the passenger compartment is subjected to a severe impact from the side. 59 Before driving well as the front seats, and parts of the front pillar and roof side rail, may be hot for several minutes. The airbag itself may also be hot. 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a colli- sion The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ● Hitting a curb, edge of pavement or hard surface ● Falling into or jumping over a deep hole ● Landing hard or vehicle falling ■ Types of collisions that may not deploy the SRS airbag (front airbags) The SRS front airbags are generally not designed to inflate if the vehicle is involved in a side or rear collision, if it rolls over, or if it is involved in a low-speed frontal collision. But, whenever a collision of any type causes sufficient forward deceleration of the vehicle, deployment of the SRS front airbags may occur. ● Collision from the side ● Collision from the rear ● Vehicle rollover 60 1-7. Safety information ■ Types of collisions that may not deploy the SRS airbag (side and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment. 1 ● Collision from the side to the vehicle body Before driving other than the passenger compartment ● Collision from the side at an angle The SRS side airbags and curtain shield airbags are not generally designed to inflate if the vehicle is involved in a frontal or rear collision, if it rolls over, or if it is involved in a low-speed side collision. ● Collision from the front ● Collision from the rear ● Vehicle rollover 61 1-7. Safety information ■ When to contact your Lexus dealer In the following cases, contact your Lexus dealer as soon as possible. Do not disconnect the battery cables before contacting your Lexus dealer. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or deformed, or was involved in an accident that was not severe enough to cause the SRS airbags to inflate. ● A portion of the doors is damaged or deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS side airbags and curtain shield airbags to inflate. ● The pad section of the steering wheel, front passenger airbag cover or lower portion of the instrument panel is scratched, cracked, or otherwise damaged. ● The surface of the seats with the side air- bag is scratched, cracked, or otherwise damaged. ● The portion of the front pillars, rear pillars or roof side rail garnishes (padding) containing the curtain shield airbags is scratched, cracked, or otherwise damaged. 62 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. 1 ● The driver and all passengers in the vehicle must wear their seat belts properly. ● The SRS driver airbag deploys with considerable force, and can cause death or serious injury especially if the driver is very close to the airbag. The National Highway Traffic Safety Administration ("NHTSA") advises: Since the risk zone for driver airbag is the first 2 - 3 in. (50 - 75 mm) of inflation, placing yourself 10 in. (250 mm) from your driver airbag provides you with a clear margin of safety. This distance is measured from the center of the steering wheel to your breastbone. If you sit less than 10 in. (250 mm) away now, you can change your driving position in several ways: • Move your seat to the rear as far as you can while still reaching the pedals comfortably. • Slightly recline the back of the seat. Although vehicle designs vary, many drivers can achieve the 10 in. (250 mm) distance, even with the driver seat all the way forward, simply by reclining the back of the seat somewhat. If reclining the back of your seat makes it hard to see the road, raise yourself by using a firm, non-slippery cushion, or raise the seat if your vehicle has that feature. • If your steering wheel is adjustable, tilt it downward. This points the airbag toward your chest instead of your head and neck. The seat should be adjusted as recommended by NHTSA above, while still maintaining control of the foot pedals, steering wheel, and your view of the instrument panel controls. 63 Before driving The SRS airbags are supplemental devices to be used with the seat belts. 1-7. Safety information CAUTION ■ SRS airbag precautions ● If the seat belt extender has been con- nected to the driver's seat belt buckle but the seat belt extender has not also been fastened to the latch plate of the driver's seat belt, the SRS driver's airbag system will judge that the driver is wearing the seat belt even though the seat belt has not been connected. In this case, the driver's airbag may not activate correctly in a collision, resulting in death or serious injury in the event of collision. Be sure to wear the seat belt with the seat belt extender. ● The SRS front passenger airbag also deploys with considerable force, and can cause death or serious injury especially if the front passenger is very close to the airbag. The front passenger seat should be as far from the airbag as possible with the seatback adjusted, so the front passenger sits upright. ● Improperly seated and/or restrained infants and children can be killed or seri- ously injured by a deploying airbag. An infant or child who is too small to use a seat belt should be properly secured using a child restraint system. Lexus strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are the safest for infants and children. (P. 68) 64 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. SRS front passenger airbag unit or sit on the knees of a front passenger while the vehicle is moving. ● Do not drive the vehicle while the driver or passenger have items resting on their knees. ● Do not lean against the door, the roof side rail or the front, side and rear pillars. ● Do not allow anyone to kneel on the front passenger seat toward the door or put their head or hands outside the vehicle. 65 Before driving ● Do not allow a child to stand in front of the 1 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not attach anything to or lean anything against areas such as the dashboard, steering wheel pad or lower portion of the instrument panel. These items can become projectiles when SRS driver, front passenger and knee airbags deploy. ● Do not attach anything to areas such as the door, windshield glass, side door glass, front and rear pillars, roof side rail or assist grip. ● Do not hang coat hangers or other hard objects on the coat hooks. All of these items could become projectiles and seriously injure or kill you, should the SRS curtain shield airbag deploy. ● If the vinyl cover is put on the area where the SRS knee airbag will deploys, be sure to remove it. ● Do not use seat accessories which cover the parts where the SRS side airbags inflate as they may interfere with inflation of the airbags. ● Do not strike or apply significant levels of force to the area of the SRS airbag components shown on P. 58. Doing so can cause the SRS airbags to malfunction. ● Do not touch any of the component parts immediately after the SRS airbags have deployed (inflated) as they may be hot. ● If breathing becomes difficult after the SRS airbag has deployed, open a door or window to allow fresh air in, or leave the vehicle if it is safe to do so. Wash off any residue as soon as possible to prevent skin irritation. ● If the areas where the SRS airbags are stored, such as the steering wheel pad and front pillar garnish, are damaged or cracked, have them replaced by your Lexus dealer. 66 1-7. Safety information CAUTION ■ Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Lexus dealer. The SRS airbag may malfunction or deploy (inflate) accidentally, causing death or serious injury. ● Repairs, modifications, removal or replacement of the steering wheel, instrument panel, dashboard, seats or seat upholstery, front, side and rear pillars or roof side rails ● Repairs or modifications of the front fender, front bumper, or side of the occupant compartment ● Installation of snow plows, winches, etc. to the front grille (bull bars, kangaroo bar etc.) ● Modifications to the vehicle's suspension system ● Installation of electronic devices such as mobile two-way radios or CD players 67 Before driving ● Installation, removal, disassembly and repair of the SRS airbags 1 1-7. Safety information Child restraint systems Lexus strongly recommends the use of child restraint systems. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems. Points to remember Studies have shown that installing a child restraint on a rear seat is much safer than installing one to the front passenger seat. ● Choose a child restraint system appropriate to the age and size of the child. ● For installation details, follow the instructions provided with the child restraint system. General installation instructions are provided in this manual. (P. 71) Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child. Infant seat 68 1-7. Safety information Convertible seat 1 Before driving Booster seat ■ When the child restraint system is not in use Leave the child restraint system properly secured on the seat. Do not store the restraint loosely on a passenger seat or in the trunk. ■ Selecting an appropriate child restraint system Get an appropriate child restraint system for the child. If a child is too large for a child restraint system, sit the child on a rear seat and use the vehicle's seat belt. (P. 30) 69 1-7. Safety information CAUTION ■ Child restraint precautions ● For effective protection in automobile accidents and sudden stops, a child must be properly restrained, using a seat belt or child restraint system depending on the age and size of the child. Holding a child in your arms is not a substitute for a child restraint system. In an accident, the child can be crushed against the windshield, or between you and the vehicle's interior. ● Lexus strongly urges the use of a proper child restraint system that conforms to the size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat. ● Never install a rear-facing child restraint system on the front passenger seat. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat. ● A forward-facing child restraint system should allowed to be installed on the front passenger seat only when it is unavoidable. Always move the seat as far back as possible, because the front passenger airbag could inflate with considerable speed and force. Otherwise, the child may be killed or seriously injured. ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of collision. ● Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front pillar or roof side rail from which the side airbags or curtain shield airbags deploy even if the child is seated in the child restraint system. It is dangerous if the side airbags and curtain shield airbags inflate, and the impact could cause death or serious injury to the child. ● Make sure you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of a sudden stop or accident. 70 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the outside rear seats using a seat belt or a child restraint lower anchor belt. Attach the top strap when installing a child restraint. 1 Before driving Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver’s seat belt) (P. 30) Child restraint lower anchorages Lower anchorages are provided for the outside rear seats. (Buttons displaying the location of the anchorages are attached to the seats.) Anchor bracket (for top strap) Anchor brackets are provided for all rear seats. 71 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) ■ Rear facing child seat Infant/convertible Place the child seat on the rear STEP 1 seat facing the rear of the vehicle. STEP 2 Run the seat belt through the infant seat and insert the plate into the buckle. Make sure that the belt is not twisted. STEP 3 Fully extend the shoulder belt and then allow it to retract slightly in order to activate the ALR lock mode. Lock mode allows the seat belt to retract only. 72 1-7. Safety information STEP 4 While pushing the child seat down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. ■ Forward facing Convertible child seat STEP 1 Place the child seat on the seat facing the front of the vehicle. STEP 2 Run the seat belt through the child seat and insert the plate into the buckle. Make sure that the belt is not twisted. STEP 3 Fully extend the shoulder strap and then allow it to retract slightly into the ALR lock mode. Lock mode allows the seat belt to retract only. 73 1 Before driving After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. 1-7. Safety information STEP 4 While pushing the child seat into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. ■ Booster seat STEP 1 Place the child seat on the seat facing the front of the vehicle. STEP 2 Sit the child in the child seat. Fit the seat belt to the child seat according to the manufacturer's instructions and insert the plate into the buckle. Make sure that the belt is not twisted. Check that the shoulder belt is correctly positioned over the child's shoulder, and that the lap belt is as low as possible. (P. 30) 74 1-7. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. 1 Before driving Installation with child restraint lower anchorages STEP 1 STEP 2 Flip the cover. Latch the hooks of the lower straps onto the anchorages. If the child restraint has a top strap, the top strap should be latched onto the anchorages. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system. Canada only Type A 75 1-7. Safety information STEP 1 STEP 2 Flip the cover. Latch the buckles onto the anchorages. If the child restraint has a top strap, the top strap should be latched onto the anchorages. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system. Canada only Type B Child restraint systems with a top strap STEP 1 76 Secure the child restraint using a seat belt or a lower anchors, and lock the head restraint in place at the lowest position. 1-7. Safety information STEP 2 Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top strap. Make sure the top strap is securely latched. 1 Before driving ■ Laws and regulations pertaining to anchorages Anchorages conform to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifications can be used. This vehicle is designed to confirm to the SAE J1819. CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode: (P. 32) ● ALR mode causes the belt to tighten only which could cause injury or discomfort to the child. ● Do not allow the child to play with the seat belt or the child could be killed or seri- ous injured. 77 1-7. Safety information CAUTION ■ When installing a child restraint system Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child may be injured or even killed in the event of sudden braking or an accident. ● If the driver’s seat interferes with the child restraint system and prevents it from being attached correctly, attach the child restraint system to the right-hand rear seat. ● Only put a forward facing or booster child seat on the front seat when unavoidable. When installing a forward facing or booster child restraint on the front passenger seat, move the seat as far back as possible. Failing to do so may result in death or serious injury if the airbags deploy (inflate). ● When a booster seat is installed, always ensure that the shoulder belt is posi- tioned across the center of the child's shoulder. The belt should be kept away from the child's neck, but not so that it could fall off the child's shoulder. Failing to do so may result in death or serious injury in the event of an accident or sudden braking. ● Ensure that the belt and tab are securely locked and the seat belt is not twisted. ● Push and pull the child seat in different directions to be sure it is secure. ● Follow all installation instructions provided by the child restraint system manufac- turer. 78 1-7. Safety information CAUTION ■ Do not use a seat belt extender If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of a collision. When using the lower anchorages, be sure that there are no foreign objects around the anchorages and that the seat belt is not caught behind the child seat. Make sure the child restraint system is securely attached, or it may cause death or serious injury to the child in the event of a sudden stop or accident. 79 Before driving ■ To correctly attach a child restraint system to the anchorages 1 1-7. Safety information 80 When driving 2 Driving the vehicle....................... 82 2-4. Using other driving systems..................................... 121 Starting the engine ...................... 89 Cruise control ............................... 121 Automatic Transmission ............ 92 Dynamic radar cruise control .......................................... 124 2-1. Driving procedures................. 82 Manual Transmission .................. 96 Turn signal lever ............................ 98 Parking brake................................. 99 2-2. Instrument cluster................... 100 Gauges and meters .................. 100 Indicators and warning lights.............................................. 106 Multi-information display........ 109 2-3. Operating the lights and windshield wipers.................. 113 Headlight switch........................... 113 Fog light switch.............................. 116 Windshield wipers and washer............................................ 117 Headlight cleaner switch ........ 120 Lexus parking assist-sensor.............................. 133 Driving assist systems............... 139 PCS (Pre-Collision System)........................................ 144 2-5. Driving information................ 147 Cargo and luggage.................... 147 Vehicle load limits ...................... 150 Winter driving tips ....................... 151 Trailer towing................................ 156 Dinghy towing (vehicles with an automatic transmission) ........ 157 Dinghy towing (vehicles with a manual transmission)............................. 158 81 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driving. ■ Starting the engine (P. 89) ■ Driving Automatic transmission STEP 1 With the brake pedal depressed, shift the shift lever to D. (P. 92) STEP 2 Release the parking brake. (P. 99) Gradually release the brake pedal and gently push the accelerator pedal to accelerate the vehicle. Manual transmission STEP 1 With the clutch pedal fully depressed, shift the shift lever into 1. (P. 96) STEP 2 Release the parking brake. (P. 99) STEP 3 Gradually release the clutch pedal. At the same time, gently depress the accelerator pedal to accelerate the vehicle. ■ Stopping Automatic transmission STEP 1 With the shift lever in D, push the brake pedal. STEP 2 If necessary, set the parking brake. STEP 3 When the vehicle is stopped for an extended period of time, shift the shift lever to P or N. (P. 92) Manual transmission STEP 1 With the clutch pedal fully depressed, push the brake pedal. STEP 2 If necessary, set the parking brake. When the vehicle is stopped for an extended period of time, shift the shift lever into N. (P. 96) 82 2-1. Driving procedures ■ Parking the vehicle Automatic transmission STEP 1 With the shift lever in D, push the brake pedal. STEP 2 Set the parking brake. (P. 99) STEP 3 Shift the shift lever to P. (P. 92) STEP 4 Stop the engine. STEP 5 Lock the door, making sure that you have the electronic key on your person. Manual transmission STEP 1 With the clutch pedal fully depressed, push the brake pedal. STEP 2 Set the parking brake. (P. 99) STEP 3 Shift the shift lever into N. (P. 96) STEP 4 Stop the engine. STEP 5 Lock the door, making sure that you have the electronic key on your person. 2 When driving Starting on a steep incline Automatic transmission Firmly set the parking brake and shift the shift lever to D. Gently depress the accelerator pedal. STEP 3 Release the parking brake. Manual transmission STEP 1 STEP 2 STEP 1 STEP 2 STEP 3 With the parking brake firmly set and the clutch pedal fully depressed, shift the shift lever into 1. Lightly depress the accelerator pedal at the same time as gradually releasing the clutch pedal. Release the parking brake. 83 2-1. Driving procedures ■ Breaking in your new Lexus To extend the life of the vehicle, the following precautions are recommended to observe: ● For the first 186 miles (300 km): Avoid sudden stops. ● For the first 621 miles (1000 km): • • • • Do not drive at extremely high speeds. Avoid sudden acceleration. Do not drive continuously in the low gears. Do not drive at a constant speed for extended periods. ■ Operating your vehicle in a foreign country Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (P. 372) CAUTION ■ When starting the vehicle With automatic transmission vehicles, always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accelerator pedals to avoid depressing the wrong pedal. Accidentally depressing the accelerator pedal instead of the brake pedal will result in sudden acceleration that may lead to an accident that could result in death or serious injury. ● Do not drive the vehicle over or stop the vehicle near flammable materials. ● With automatic transmission vehicles, do not let the vehicle roll backwards while the shift lever is in a driving position, or roll forward while the shift lever is in R. Doing so may cause the engine to stall or lead to poor brake and steering performance, resulting in an accident or damage to the vehicle. ● If the smell of exhaust is noticed inside the vehicle, open the windows and check that the trunk is closed. Large amounts of exhaust in the vehicle can cause driver drowsiness and eventually, death. Have the cause of the problem inspected immediately. 84 2-1. Driving procedures CAUTION ● Do not under any circumstances shift the shift lever to P, R or N (automatic trans- mission vehicles) or R (manual transmission vehicles) while the vehicle is moving. Doing so can cause significant damage to the transmission system and may result in a loss of vehicle control. ● Do not shift the shift lever to N while the vehicle is moving. Doing so may cause the engine brake to not operate properly and lead to an accident. ● Do not turn the engine off while driving. ● With manual transmission vehicles, do not leave the clutch pedal depressed or use the half-clutch any more than necessary. These actions will result in increased wear of the clutch, and may cause accidents as a result of damage to the clutch. ● Use engine braking (downshift) to maintain a safe speed when driving down a steep hill. Using the brakes continuously may cause the brakes to overheat and lose effectiveness. (P. 93) ● When stopped on an inclined surface, use the brake pedal and parking brake to prevent the vehicle from rolling backward or forward and causing an accident. ● Be careful when driving on slippery surfaces, as the vehicle may spin or skid when downshifting, rapidly accelerating, braking or turning. ● Do not adjust the position of the steering wheel, the seat, or the inside or outside rear view mirrors while driving. Doing so may result in a loss of vehicle control that can cause accidents that may result in death or serious injury. ● Always check that all passengers' arms, heads or other parts of their bodies are not outside the vehicle, as this may result in death or serious injury. ● Do not drive the vehicle off-road. This is not a AWD vehicle designed for real off-road driving. Proceed with all due caution if it becomes unavoidable to drive off-road. ● Do not drive across river crossings or through other bodies of water. This may cause electric/electronic components to short circuit, damage the engine or cause other serious damage to the vehicle. 85 When driving The brake booster system will not operate properly if the engine is not running. 2 2-1. Driving procedures CAUTION ■ When shifting the shift lever With automatic transmission vehicles, be careful not to shift the shift lever with the accelerator pedal depressed. This may lead to unexpected rapid acceleration of the vehicle that may cause an accident and result in death or serious injury. ■ When the vehicle is stopped ● Do not race the engine. If the vehicle is in any gear other than P (vehicles with an automatic transmission only) or N the vehicle may accelerate suddenly and unexpectedly, and may cause an accident. ● Do not leave the vehicle with the engine running for a long time. If such a situation cannot be avoided, park the vehicle in an open space and check that exhaust fumes do not enter the vehicle interior. ● With automatic transmission vehicles, always keep a foot on the brake pedal while the engine is running to prevent an accident caused by the vehicle moving. ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehi- cle when it is in the sun. Failure to do so may result in the following. • Gas may leak from a cigarette lighter or spray can, and may lead to a fire. • The temperature inside the vehicle may cause the plastic lenses and plastic material of eye glasses to deform or crack. • Soft drink cans may fracture, causing the contents to spray over the interior of the vehicle, and may also cause a short circuit in the vehicle's electrical components. ● Always apply the parking brake, shift the shift lever to P (vehicles with an automatic transmission only), stop the engine and lock the vehicle. Do not leave the vehicle unattended while the engine is running. ● Do not touch the exhaust pipe while the engine is running or immediately after turning the engine off. Doing so may cause burns. ● Do not leave the engine running in an area with snow build up, or where snow is expected to fall. Exhaust gases may enter the vehicle and cause gas poisoning. 86 2-1. Driving procedures CAUTION ■ When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shift lever or press the accelerator pedal, which could cause an accident or fire due to abnormal engine overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust fumes may enter the vehicle and cause gas poisoning. ■ When braking the vehicle 2 ● When the brakes are wet, drive more cautiously. ● If the power brake assist function does not operate, do not follow other vehicles closely and avoid downhills or sharp turns that require making. In this case, braking is still possible, but it will require more force on the pedal than usual. Braking distance may also increase. ● Do not pump the brake pedal if the engine stalls. Each push on the pedal uses up your reserved brake fluid pressure. ● The brake system consists of 2 individual hydraulic systems: if one of the systems fails, the other will still operate. In this case, the brake pedal should be depressed more firmly than usual and braking distance becomes longer. Do not drive your vehicle with only a single brake system. Have your brakes fixed immediately. ■ If the vehicle becomes stuck or bogged (AWD models) Do not spin the wheels recklessly when any of the tires is up in the air, or stuck in sand or mud, etc. This may damage the drive system components or propel the vehicle forward (or in another direction) and cause an accident. 87 When driving Braking distance increases when the brakes are wet, and may cause one side of the vehicle to brake differently than the other side. Also the parking brake may not securely hold the vehicle. 2-1. Driving procedures NOTICE ■ While driving the vehicle With automatic transmission vehicles, do not use the accelerator pedal or depress accelerator and brake pedals together to hold the vehicle on a hill. ■ When parking the vehicle With automatic transmission vehicles, always put the shift lever in P. Failure to do so may cause the vehicle to move or the vehicle may accelerate suddenly if the accelerator pedal is accidentally depressed. ■ Avoiding damage to vehicle parts ● Do not turn the steering wheel fully in either direction and hold it there for a long time. Doing so may damage the power steering motor. ● When driving over bumps in the road, drive as slowly as possible to avoid damag- ing the wheels, underside of the vehicle, etc. ■ If you hear a squealing or scraping noise (brake pad wear limit indicators) Have your Lexus dealer check and replace the brake pads as soon as possible. The rotor damage can result if the pads are not replaced when needed. Front brake only: Moderate levels of the brake pad and disc wear allow enhanced front braking power. As a result, the discs may wear more quickly than conventional brake discs. Therefore, when replacing the brake pads, Lexus recommends that you also have the thickness of the discs measured. It is dangerous to drive the vehicle when the wear limits of the brake pads and/or that of the brake discs are exceeded. ■ If you get a flat tire while driving A flat or damaged tire may cause the following situations. Hold the steering wheel firmly and gradually press the brake pedal to slow down the vehicle. ● It may be difficult to control your vehicle. ● The vehicle will make abnormal sounds. ● The vehicle will behave abnormally. Replace a flat tire with a new one. (P. 350) 88 2-1. Driving procedures Starting the engine Modes can be switched by pressing the engine switch when carrying the electronic key on your person. (The engine can be started in any mode by operating the switch at the same time as depressing the brake pedal or clutch pedal.) ■ Changing engine switch mode OFF mode ACC mode 2 When driving Some electrical components such as the audio system can be used. IG-ON mode All electrical components can be used. ■ Starting the engine Automatic transmission STEP 1 STEP 2 STEP 3 Check that the parking brake is set. Check that the shift lever is set in P. Sit in the driver’s seat and firmly depress the brake pedal. The engine switch indicator turns green. Press the engine switch. Manual transmission STEP 1 Check that the parking brake is set. STEP 2 Check that the shift lever is set in N. STEP 3 Firmly depress the clutch pedal. STEP 4 The engine switch indicator turns green. STEP 4 Press the engine switch. 89 2-1. Driving procedures ■ If the engine does not start The engine immobilizer system may not have been deactivated. (P. 50) ■ When the engine switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by your Lexus dealer immediately. ■ Auto power OFF function The engine switch will automatically turn OFF when left in ACC mode for 1 hour or more. ■ Electronic key battery depletion P. 8 ■ When the electronic key battery is discharged P. 293 ■ Conditions affecting operation P. 6 CAUTION ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not press the accelerator while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■ Caution when driving Do not touch the engine switch while driving. Pressing and holding the engine switch will stop the engine, which may lead to an unexpected accident. 90 2-1. Driving procedures NOTICE ■ To prevent battery discharge Do not leave the engine switch in ACC or IG-ON mode for long periods without the engine running. ■ When starting the engine ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have the engine checked immediately. 2 When driving 91 2-1. Driving procedures Automatic Transmission (if equipped) Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever While the engine switch is in IG-ON mode, depress the brake pedal and move the shift lever. 92 2-1. Driving procedures ■ Shift position uses Shift position Function P Parking the vehicle or starting the engine R Reversing N Neutral D Normal driving*1 S S mode driving*2 (P. 94) 2 When driving *1: To improve fuel consumption and reduce noises, set the shift lever in the D position for normal driving. 2 * : Selecting shift ranges using S mode restricts the upper limit of the possible gear ranges, controls engine braking forces, and prevents unnecessary upshifting. ■ Selecting a driving mode The following patterns can be selected to suit current driving and operating conditions. Power mode For powerful acceleration and driving in mountainous regions. Normal mode Snow mode For accelerating and driving on slippery road surfaces, such as on snow. Press SNOW to return to normal mode. 93 2-1. Driving procedures Changing shift ranges in S mode Shift the shift lever to the S position and operate the shift lever or shift paddle switch. Upshifting Downshifting The initial shift range in S mode is automatically set to 5 or 4 according to vehicle speed. However, the initial shift range may be set to 3 or 2 if the AI-SHIFT has operated while the shift lever was in the D position. (P. 95) ■ Shift ranges and their functions Shift range Function 6 Automatically selecting gears between 1 and 6 according to vehicle speed and driving conditions. 5 Automatically selecting gears between 1 and 5 according to vehicle speed and driving conditions. 4 Automatically selecting gears between 1 and 4 according to vehicle speed and driving conditions. 3 Automatically selecting gears between 1 and 3 according to vehicle speed and driving conditions. 2 Automatically selecting gears between 1 and 2 according to vehicle speed and driving conditions. 1 Setting the gear at 1. A lower shift range will provide greater engine braking forces than a higher shift range. 94 2-1. Driving procedures ■ Gear position display when driving in S mode The current gear is displayed on the multi-information display. (P. 112) ■ Downshifting restrictions warning buzzer (in the S mode) To help ensure safety and driving performance, downshifting operation may sometimes be restricted. In some circumstances, downshifting may not be possible even when the shift lever or shift paddle switch is operated. (The warning buzzer will sound twice.) ■ When driving with the cruise control system or dynamic radar cruise control sys- 2 tem ■ SNOW mode automatic deactivation SNOW mode is automatically deactivated if the engine switch is turned to ACC or IG-ON mode after driving in SNOW mode. ■ If the shift lever cannot be shifted from P P. 357 ■ If the indicator does not come on even after shifting the shift lever to S This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Lexus dealer immediately. (In this situation, the vehicle will operate as if the shift lever is in D.) ■ AI-SHIFT The AI-SHIFT automatically shifts the gear to the optimal position according to the driver performance and driving conditions. The AI-SHIFT automatically operates when the shift lever is in the D position. (Shifting the shift lever to the S position cancels the function.) 95 When driving The engine brake will not operate in the S mode, even when downshifting to 5 or 4. (P. 121, 124) 2-1. Driving procedures Manual Transmission (if equipped) ■ Shifting the shift lever Fully depress the clutch pedal before operating the shift lever. ■ Shifting the shift lever into R Shift the shift lever into the R position while lifting up the ring section. Snow mode The snow mode is used for accelerating and driving on slippery road surfaces, such as on snow. Push the switch once more to return to normal mode. 96 2-1. Driving procedures ■ Recommended shifting speed The following table indicates shifting speeds for optimum fuel economy. mph (km/h) Shifting operation Recommended speed 1 2 3 25 (40) 3 4 40 (64) 4 5 45 (72) 5 6 50 (80) 2 15 (24) 2 When driving ■ Maximum downshifting speed Adhere to the downshifting speeds in the following table in order to prevent overrevving the engine. mph (km/h) Shift position Maximum speed 1 33 (54) 2 56 (90) 3 83 (134) 4 108 (172) 97 2-1. Driving procedures Turn signal lever Left turn Right turn Move and hold the lever partway to signal a lane change The left hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change The right hand signal will flash until you release the lever. ■ Turn signals can be operated when The engine switch is in IG-ON mode. ■ If the indicators flash faster than usual Check that a light bulb in the front or rear turn signal lights has not burned out. 98 2-1. Driving procedures Parking brake CANADA U.S.A. Automatic transmission Sets the parking brake* (Depressing the pedal again releases the parking brake.) *: Fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot. 2 When driving Manual transmission Sets the parking brake Fully set the parking brake while depressing the brake pedal. CANADA U.S.A. Releases the parking brake NOTICE ■ Before driving Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear. 99 2-2. Instrument cluster Gauges and meters The units used on the speedometer and the tachometer gauge display may differ depending on the model/type. The following gauges, meters and display illuminate when the engine switch is in IG-ON mode. Speedometer Displays the vehicle speed. Multi-information display P. 109 Tachometer Displays the engine speed in revolutions per minute. Tacho indicator When the set engine speed is reached while driving, this ring-shaped indicators comes on in yellow. The indicator comes on in red when the engine speed reaches a dangerous range. Engine coolant temperature gauge Displays the engine coolant temperature. 100 2-2. Instrument cluster Odometer Displays the total distance the vehicle has been driven. Trip meter Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. Speed indicator 2 When driving When the set speed is reached while driving, this ring-shaped indicator comes on in yellow. The indicator comes on in red when the vehicle speed reaches the dangerous range. Fuel gauge Displays the quantity of fuel remaining in the tank. Odometer/trip meter and trip meter reset button Switches between odometer and trip meter displays. Pushing and holding the button will reset the trip meter when the trip meter is being displayed. Instrument panel light control The brightness of the instrument panel lights can be adjusted. Darker Brighter 101 2-2. Instrument cluster Speed indicator ■ Turning the indicator ON/OFF P. 214 ■ Changing the speed indicator setting The satellite switch can be used to change the set speed at which the yellow speed indicator ring comes on. The setting can be made only when the engine switch is in IG-ON mode and the vehicle is stopped. STEP 1 Push the or switch to select the speed indicator set mode. ( ) Turn the speed indicator to OFF and then ON by pushing the ON/ OFF button. ( ) After one second, the mode enters the indicator setting mode. The speedometer needle moves to the previously set speed. 102 2-2. Instrument cluster STEP 2 Push the or switch within 6 seconds of the speedometer needle moving to change the setting of the desired speed, then turn the indicator mode to ON by pushing the ON/OFF button. Pushing and holding the switch changes values at a faster rate. The yellow indicator is displayed to indicate that the desired speed has been set. Tacho indicator ■ Turning the indicator ON/OFF P. 214 ■ Changing the tacho indicator setting The satellite switch can be used to change the set engine speed at which the yellow indicator ring comes on. The setting can be made only when the engine switch is in IG-ON mode and the vehicle is stopped. 103 2 When driving If the satellite switch is not operated for some time, the multi-information display returns to its previously displayed content. 2-2. Instrument cluster STEP 1 Push the or switch to select the tacho indicator set mode. ( ) Turn the tacho indicator to OFF and then ON by pushing the ON/ OFF button. ( ) After one second, the mode enters the indicator setting mode. The tachometer needle moves to the previously engine speed. STEP 2 Push the or switch within 6 seconds of the tachometer needle moving to set the desired engine speed, then set the indicator mode in ON by pushing the ON/OFF button. Pushing and holding the switch changes values at a faster rate. If the satellite switch is not operated for some time, the multi-information display returns to its previously displayed content. 104 2-2. Instrument cluster The yellow indicator value is displayed to indicate that engine speed has been set. 2 When driving ■ Speed indicator display conditions and vehicle speed setting range Vehicle speed setting range: Approximately 30 to 100 mph (approximately 50 to 160 km/h) When the maximum speed is selected, the speed indicator comes on only in red. ■ Tacho indicator display conditions and engine speed setting range Engine rpm setting range: Approximately 2000 to 6500 rpm (r/min) When the maximum rpms is selected, the tacho indicator comes on only in red. NOTICE ■ To prevent damage to the engine and its components ● Do not let the indicator needle of the tachometer enter the red zone, which indi- cates the maximum engine speed. ● The engine may be overheating if the temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place. Check the engine after it has cooled completely. (P. 365) 105 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. Instrument cluster The units used on the speedometer and the tachometer gauge display may differ depending on the model/type. Center panel 106 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator (P. 98) (U.S.A.) (CANADA) Headlight indicator (P. 113) (vehicles with a manual transmission) (vehicles with an automatic transmission) Tail light indicator (P. 113) 2 ETCS SNOW indicator (P. 96) When driving Headlight high beam indicator (P. 113) (vehicles with an automatic transmission) ECT SNOW indicator (P. 93) ECT PWR indicator (P. 93) Cruise control indicator (P. 121) * AFS OFF indicator light (P. 114) (if equipped) (vehicles with an automatic transmission) Shift position and shift range indicators (P. 92) (if equipped) Lexus parking assist-sensor indicator (P. 133) * Slip indicator (P. 140) 107 2-2. Instrument cluster ■ Warning lights Warning lights inform the driver of malfunctions in any of the vehicle’s systems. (P. 329) * * * (U.S.A.) * * (Canada) * (U.S.A.) * (Canada) * * (Canada) * (U.S.A.) * * (if equipped) *: These lights turn on when the engine switch is turned to IG-ON mode to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds.There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Lexus dealer. CAUTION ■ If a safety system warning light does not come on Should a safety system light such as ABS and the SRS airbag warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Lexus dealer immediately if this occurs. 108 2-2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of drivingrelated data, including the current outside air temperature. Trip information (P. 110) Displays driving range, fuel consumption and other cruising related information. Satellite switch mode display (P. 214) 2 When driving Lexus parking assist-sensor display (if equipped) Automatically displayed when using Lexus parking assist-sensor. This switch is used to configure various function settings. Dynamic radar cruise control display (if equipped) (P. 124) Automatically displayed when using dynamic radar cruise control. Warning messages (P. 334) Automatically displayed when a malfunction occurs in one of the vehicle’s systems. 109 2-2. Instrument cluster Trip information Display items can be switched by pushing the DISP switch. Type A Type B ■ Outside temperature Displays the outside air temperature. The temperature range that can be displayed is from -40F (40C) to 122F (50C). When the temperature drops to 37F (3C), the digits of the display will flash for 10 seconds. 110 2-2. Instrument cluster ■ Driving range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. ■ Average fuel consumption 2 The function can be reset by pushing the DISP switch for longer than one second when the average fuel consumption is displayed. ■ Average fuel consumption after refueling Displays the average fuel consumption since the vehicle was last refueled. ■ Current fuel consumption Displays the current rate of fuel consumption. ■ Average vehicle speed Displays the average vehicle speed since the engine was started or the function was reset. The function can be reset by pushing the DISP switch for longer than one second when the average vehicle speed is displayed. 111 When driving Displays the average fuel consumption since the function was reset. 2-2. Instrument cluster ■ Gear position display (vehicles with an automatic transmission only) Indicates the current gear, and the range of gears that is available when the shift lever is in the S or D position. the gear range is shown by the number of dots () and the current gear is shown as a number. The transmission automatically selects the gears within the driver selected gear range. In the illustration to the left, a range of 6 available gears (1 through 6) has been selected by the driver. (The shift lever is in the D or S position with 6 ranges enabled) It is possible for the transmission to automatically select between all 6 of the gears. In this case, the transmission has selected third gear. ■ System check display After switching the engine switch to IG-ON mode, CHECK is displayed while system operation is checked. When the system check is complete, COMPLETED is displayed before returning to the normal screen. CAUTION ■ The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver's shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in personal death or injury. 112 2-3. Operating the lights and windshield wipers Headlight switch The headlights can be operated manually or automatically. U.S.A. CANADA The side marker, parking, tail, license plate and instrument panel lights turn on. The headlights and all lights listed above turn on. 2 When driving The headlights and parking lights turn on and off automatically. (When the engine switch is in IG-ON mode) Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams. Release to turn them off. You can flash the high beams with the headlights on or off. 113 2-3. Operating the lights and windshield wipers AFS (vehicles with discharge headlights) AFS (Adaptive Front Lighting System) improves visibility at intersections and on curves by automatically adjusting the level of the headlights according to vehicle speed and the degree of the tire angle that are controlled by steering input. Operates at speeds of 6 mph (10 km/h) or higher. ■ Deactivating AFS How to switch: P. 214 The indicator turns on when the AFS is deactivated. ■ Daytime running light system To make your vehicle more visible to other drivers, the headlights turn on automatically (at a reduced intensity) whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night. ■ Headlight control sensor The sensor may not function properly if an object is placed on the sensor, or anything that blocks the sensor is affixed to the windshield. Doing so interferes with the sensor detecting the level of ambient light and may cause the automatic headlight system to malfunction. ■ Automatic light off system The headlights and tail lights turn off 30 seconds after a door is opened or closed if the engine switch has been switched to ACC or turned OFF while the headlights are turned on. (The light turns off immediately if the button on the key is pressed after all doors are locked.) To turn the lights on again, switch to IG-ON mode, or turn the light switch OFF once and then back to the or position. 114 2-3. Operating the lights and windshield wipers ■ Automatic headlight leveling system (vehicles with discharge headlights) The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users. ■ If the indicator flashes... (vehicles with discharge headlights) It may indicate a malfunction in the system. Contact your Lexus dealer. ■ Customization Settings (e.g. light sensor sensitivity) can be changed. (P. 395) 2 When driving NOTICE ■ To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not running. 115 2-3. Operating the lights and windshield wipers Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. To turn the front fog lights off To turn the front fog lights on 116 2-3. Operating the lights and windshield wipers Windshield wipers and washer ■ Intermittent wiper with interval adjuster (if equipped) Wiper intervals can be adjusted for intermittent operation (when INT is selected). Intermittent windshield wiper interval adjustment (increase) Intermittent windshield wiper interval adjustment (decrease) Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Wash/wipe operation 2 When driving Wipers operate automatically. (After operating several times, the wipers operate one more time after a short delay to prevent dripping.) 117 2-3. Operating the lights and windshield wipers ■ Rain-sensing windshield wipers (if equipped) With AUTO selected, the wipers will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume and vehicle speed. Sensor sensitivity (low) Sensor sensitivity (high) Rain-sensing wiper operation Low speed wiper operation High speed wiper operation Temporary operation Wash/wipe operation Wipers operate automatically. (After operating several times, the wipers operate one more time after a short delay to prevent dripping.) ■ The windshield wiper and washer can be operated when The engine switch is in IG-ON mode. ■ Effects of vehicle speed on wiper operation Vehicle speed affects the following even when the wipers are not in AUTO mode. ● Intermittent wiper interval (INT mode) ● Wiper operation when the washer is being used (delay until drip prevention wiper sweep occurs) With LO selected, wiper operation will be switched from low speed to intermittent wiper operation only when the vehicle is stationary. (However, the mode cannot be switched when the adjustment dial for the intermittent wiper interval is set to the lowest setting.) 118 2-3. Operating the lights and windshield wipers ■ Rain drop sensor (vehicles equipped with the rain-sensing windshield wipers) The sensor judges the amount of raindrops. 2 ■ If no windshield washer fluid sprays ■ Customization Settings (e.g. drip prevention function) can be changed. (P. 395) CAUTION ■ Caution regarding the use of windshield wipers in AUTO mode The windshield wipers may operate unexpectedly if the sensor is touched or the windshield is subject to vibration in AUTO mode. Take care that your fingers or anything else do not become caught in the windshield wipers. NOTICE ■ When the windshield is dry Do not use the wipers, as they may damage the windshield. ■ When there is no washer fluid spray from the nozzle Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually. 119 When driving Check that the washer nozzles are not blocked if there is washer fluid in the windshield washer fluid reservoir. 2-3. Operating the lights and windshield wipers Headlight cleaner switch (if equipped) Washer fluid can be sprayed on the headlights. Press the switch to clean the headlights. ■ The headlight cleaner can be operated when When the engine switch is in IG-ON mode and the headlight switch is turned ON. NOTICE ■ When the washer fluid tank is empty Do not use this function when the washer fluid tank is empty. This may cause the washer fluid pump to overheat. 120 2-4. Using other driving systems Cruise control (if equipped) Use the cruise control to maintain a set speed without using the accelerator. ■ Set the vehicle speed STEP 1 Turn the ON-OFF button ON. Push the button once more to deactivate the cruise control. 2 When driving STEP 2 Accelerate or decelerate to the desired speed and press the lever down to set the cruise control speed. ■ Adjusting the speed setting Increase speed Decrease speed Hold the lever until the desired speed setting is obtained. Fine adjustment of the set speed (approximately 1.6 km/h [1.0 mph]) can be made by lightly pressing the lever up or down and releasing it. 121 2-4. Using other driving systems ■ Canceling and resuming regular acceleration Cancel Push the lever towards you to cancel cruise control, or depress the brake pedal. The speed setting is also canceled when the brakes are applied (automatic transmission) or the clutch is depressed (manual transmission). Resume To resume cruise control and return to the set speed, push the lever up. ■ Cruise control can be set when ● The shift lever is in the D or 4,5, or 6 range of S. (vehicles with an automatic transmission) ● Vehicle speed is between approximately 25 mph (40 km/h) and 125 mph (200 km/h). ■ Accelerating The vehicle can be accelerated normally. ■ Automatic cruise control cancellation The set speed is automatically cancelled in any of the following situations. ● Actual vehicle speed falls more than 10 mph (16 km/h) below the preset vehicle speed At this time, the memorized set speed is not retained. ● Actual vehicle speed is below 25 mph (40km/h) ● VSC is activated 122 2-4. Using other driving systems ■ If the cruise control indicator light flashes Turn the ON-OFF button off once, and then reactivate the system. If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Lexus dealer. CAUTION ■ To avoid operating the cruise control by mistake 2 Keep the ON-OFF button off when not in use. Do not use cruise control in any of the following situations. Doing so may result in control of the vehicle being lost and could cause serious or fatal accident. ● In heavy traffic ● On roads with sharp bends ● On slippery roads, such as those covered with rain, ice or snow ● On steep hills ● On winding roads 123 When driving ■ Situations unsuitable for cruise control 2-4. Using other driving systems Dynamic radar cruise control (if equipped) Dynamic radar cruise control supplements conventional cruise control with a vehicle-to-vehicle distance control. In the vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehicles ahead. ■ Select cruise mode Selecting vehicle-to-vehicle distance control mode Turn the ON-OFF button ON. Push the button once more to deactivate. Selecting conventional constant speed control mode Turn the ON-OFF button ON. Push the button once more to deactivate. Vehicle-to-vehicle distance control mode is always reset when the engine switch is switched to IG-ON mode. Switch to constant speed control mode. (push and hold for approximately one second) 124 2-4. Using other driving systems ■ Driving in the selected cruise control mode Accelerate or decelerate to the desired speed and press the lever down to set. 2 When driving ■ Adjusting the speed setting Increase speed Decrease speed Hold the lever until the desired speed setting is displayed. Fine adjustment of the set speed (approximately 1.0 mph [1.6 km/ h]) can be made by lightly pressing the lever up or down and releasing it. ■ Canceling and resuming the speed setting Cancel Push the lever towards you to cancel cruise control. The setting is also canceled when the brakes are applied. Resume To resume cruise control and return to the set speed, push the lever up. 125 2-4. Using other driving systems ■ Changing the vehicle-to-vehicle distance Preceding vehicle mark Each push of the switch changes the vehicle-to-vehicle distance Long Medium Short The vehicle-to-vehicle distance is automatically set to the long mode when the engine switch is switched to IG-ON mode. A mark will be displayed to indicate the presence of the vehicle if a vehicle is running ahead of you. 126 2-4. Using other driving systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles within 328 ft. (100 m) ahead and to judge the distance between your vehicle and those vehicles. Note that vehicle-to-vehicle distance will close when traveling on long downhill slopes. 2 When driving Example of constant speed cruising (when there are no vehicles ahead): When set to 62 mph (100 km/h) The vehicle travels at the speed set by the driver. The desired vehicle-to-vehicle distance can also be set by operating the vehicle-to-vehicle distance switch. Example of deceleration cruising (when the vehicle ahead is driving slower than the set speed): When fixed speed cruising is set at 62 mph (100 km/h) and the vehicle ahead is driving at 50 mph (80 km/h) When a vehicle is detected running ahead of you, in the same lane, the system automatically decelerates your vehicle. When a greater reduction in vehicle speed is necessary, the system applies the brakes. A warning tone warns you on the system cannot decelerate sufficiently to prevent your vehicle from closing on the vehicle ahead. Example of follow-up cruising (when following a vehicle driving slower than the set speed): When the speed is set to 62 mph (100 km/h) and the vehicle ahead is driving at 50 mph (80 km/h) 127 2-4. Using other driving systems The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle distance set by the driver. Example of acceleration (when there are no longer vehicles driving slower than the set speed in the lane ahead): When the speed is set to 62 mph (100 km/h) and the vehicle ahead driving at 50 mph (80 km/ h) is out of the lane When the vehicle ahead of you executes a lane change, the system slowly accelerates until the set vehicle speed is reached. The system then returns to fixed speed cruising. ■ Dynamic radar cruise control warning lights, display and buzzers Warning lights, display and buzzers are used to indicate a system malfunction or to alert you to the need for caution while driving. (P. 334) ■ The dynamic radar cruise can be set when ● The shift lever is in D or the 4, 5 or 6 range of S. ● Vehicle speed is between approximately 27 mph (43 km/h) and 87 mph (139 km/h). ■ Accelerating The vehicle can be accelerated normally. ■ Automatically canceling vehicle-to-vehicle distance control Vehicle-to-vehicle distance control driving is automatically canceled in the following situations. ● Vehicle speed falls below 25 mph (40 km/h) ● VSC is activated ● The sensor cannot operate correctly because it is covered in some way.* ● The windshield wipers are operating at high speed.* ● The ECT SNOW switch is set to snow mode.* *: Vehicle-to-vehicle distance control driving must be reset by turning the ON-OFF button on again. If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Lexus dealer. 128 2-4. Using other driving systems ■ Automatically cancelling constant speed control The set speed is automatically canceled in the following situations. ● Actual vehicle speed is more than 10 mph (16 km/h) below the preset vehicle speed At this time, the memorized set speed is not retained. ● Vehicle speed falls below 25 mph (40 km/h) ● VSC is activated ■ Vehicle-to-vehicle distance settings Distance options Vehicle-to-vehicle distance Long Approximately 164 ft. (50 m) Medium Approximately 132 ft. (40 m) Short Approximately 100 ft. (30 m) ■ Radar sensor and grille cover Always keep the sensor and grille cover clean to ensure that the vehicle-to-vehicle distance control operates properly. (Some obstructions, such as snow, ice or plastic objects, cannot be detected by the obstruction sensor.) Dynamic radar cruise control is canceled if an obstruction is detected. Grille cover Radar sensor 129 2 When driving Select a distance from the table below. Note that the distances shown correspond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle distance increases/ decreases in accordance with vehicle speed. 2-4. Using other driving systems ■ Certification For vehicles sold in U.S.A. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC RF exposure information This device complies with the FCC RF exposure requirements. For vehicles sold in Canada Operation is subject to the following two conditions; (1) This device may not cause interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. CAUTION ■ Before using dynamic radar cruise control Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set vehicle speed. If automatic deceleration/acceleration is not appropriate, adjust the vehicle speed, as well as the distance between your vehicle and vehicles ahead by applying the brakes, etc. ■ To avoid inadvertent cruise control activation Keep the ON-OFF button off when not in use. 130 2-4. Using other driving systems CAUTION ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate control of speed and could cause serious or fatal accident. ● In heavy traffic ● On roads with sharp bends 2 ● On winding roads ● Where there are sudden changes between sharp up and down gradients ● At entrances to expressways ● When weather conditions are bad enough that they may prevent the sensors from functioning correctly (fog, snow, sandstorm, etc.) ● Where buzzer can be heard often ■ When the radar sensor may not be correctly detecting the vehicle ahead Apply the brakes as necessary when any of the following types of vehicles are in front of you. As the sensor may not be able to correctly detect these types of vehicles, the proximity alarm (P. 334) will not be activated, and an accident may result. ● Vehicles that cut in suddenly ● Vehicles traveling at low speeds ● Vehicles that are not moving ● Vehicles with small rear ends (trailers with no load on board etc.) ● Motorcycles traveling in the same lane 131 When driving ● On slippery roads, such as those covered with rain, ice or snow. 2-4. Using other driving systems CAUTION ■ Conditions under which the vehicle-to-vehicle distance control may not function correctly Apply the brakes as necessary in the following conditions as the radar sensor may not be able to correctly detect vehicles ahead, and an accident may result. ● When water or snow thrown up by the surrounding vehicles hinders the function- ing of the sensor ● When your vehicle is pointing upwards (caused by a heavy load in the trunk, etc.) ● When the road curves or when the lanes are narrow ● When steering wheel operation or your position in the lane is unstable ■ To ensure the radar sensor functions correctly Do not do the following to the sensor or grille cover as doing so may cause the sensor not to function correctly and could result in an accident. ● Stick or attach anything to them ● Leave them dirty ● Disassemble, subject them to strong shocks ● Modify or paint them ● Replace them with non-genuine parts 132 2-4. Using other driving systems Lexus parking assist-sensor (if equipped) The distance to obstacles measured by the sensors is communicated via the multi-information display and a buzzer when parallel parking or maneuvering into a garage. Always check the surrounding area when using this system. For vehicles equipped with a navigation system, refer to the separate “Navigation System Owner’s Manual” for further details. ■ Types of sensors 2 When driving Front corner sensors Rear corner sensors Back sensors ■ Multi-information display (P. 109) Front corner sensor operation Rear corner sensor operation Back sensor operation 133 2-4. Using other driving systems ■ Lexus parking assist-sensor switch (P. 214) When ON, an indicator is displayed to inform the driver that the function is operational. The display and buzzer system ■ Corner sensor operation display and distance to an obstacle The system operates when the vehicle approaches within approximately 1.5 ft. (50 cm) of an obstacle. 1.5 ft. (50 cm) to 1.1 ft. (37.5 cm) from the obstacle 1.1 ft. (37.5 cm) to 0.8 ft. (25 cm) from the obstacle Flashing: Within 0.8 ft. (25 cm) of the obstacle 134 2-4. Using other driving systems ■ Back sensor operation display and distance to an obstacle The system operates when the vehicle approaches within approximately 4.5 ft. (150 cm) of an obstacle. ● The buzzer beeps faster as the vehicle approaches an obstacle. When the vehicle comes within the following distance of the obstacle, the buzzer sounds continuously. • Corner sensors: 0.8 ft. (25 cm) • Back sensors: 1.1 ft. (35 cm) ● When two or more obstacles are detected simultaneously, the buzzer system responds to the nearest obstacle. 135 2 When driving 4.5 ft. (150 cm) to 2.0 ft. (60 cm) from the obstacle 2.0 ft. (60 cm) to 1.4 ft. (45 cm) from the obstacle 1.4 ft. (45 cm) to 1.1 ft. (35 cm) from the obstacle Flashing: Within 1.1 ft. (35 cm) of the obstacle ■ Buzzer operation and distance to the obstacle A buzzer sounds when the corner sensors and back sensor are operating. 2-4. Using other driving systems Detection range of the sensors Approximately 1.5 ft. (50 cm) Approximately 4.5 ft. (150 cm) Approximately 1.5 ft. (50 cm) The diagram shows the detection range of the sensors. Note that the sensors cannot detect obstacles that are extremely close to the vehicle. 136 2-4. Using other driving systems ■ Sensor detection information ● Certain vehicle conditions and the surrounding environment may affect the ability of the sensor to correctly detect obstacles. Particular instances where this may occur are listed below. • • • • • • • • • • • Wires, fences, ropes etc. Cotton, snow and other materials that absorb radio waves Sharply-angled objects Low obstacles Tall obstacles with upper sections projecting outwards in the direction of your vehicle ■ When the display flashes and a message is displayed P. 334 ■ Certification (Canada only) This ISM device compiles with Canadian ICES-001. ■ Customization Settings (e.g. buzzer volume) can be changed. (P. 395) 137 2 When driving There is dirt, snow or ice on the sensor. The sensor is frozen. The sensor is covered in any way. The vehicle is leaning considerably to one side. On an extremely bumpy road, on an incline, on gravel, or on grass. The vicinity of the vehicle is noisy due to vehicle horns, motorcycle engines, air brakes of large vehicles, or other loud noises producing ultrasonic waves. • There is another vehicle equipped with parking assist sensors in the vicinity. • The sensor is coated with a sheet of spray or heavy rain • The vehicle is equipped with a fender pole or wireless antenna. • Towing eyelets are installed. • The bumper or sensor receives a strong impact. • The vehicle is approaching a tall or curved curb. • In addition to the examples above, there are instances in which, because of their shapes, signs and other objects may be judged by the sensor to be closer than they are. ● The shape of the obstacle may prevent the sensor from detecting it. Pay particular attention to the following obstacles. 2-4. Using other driving systems CAUTION ■ Caution when using the Lexus parking-assist sensor Observe the following precautions. Failing to do so may result in the vehicle being unable to be driven safely and possibly cause an accident. ● Do not use the sensor at speeds in excess of 6 mph (10 km/h). ● Do not attach any accessories within the sensor range. NOTICE ■ Notes when washing the vehicle Do not apply intensive bursts of water or steam to the sensor area. Doing so may result in the sensor malfunctioning. 138 2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■ ABS (Anti-lock Brake System) Restrains the vehicle from slipping when driving on slick road surfaces or in the event of sudden braking. 2 ■ BA (Brake Assist) When driving Generates an increased level of braking force after the brake pedal is depressed, when the system detects a panic stop situation. ■ LSD (Limited Slip Differential) (if equipped) Transfers drive power to the rear tires when the front tires spin, and vice versa, in order to improve traction. ■ VSC (Vehicle Stability Control) Helps the driver to control skidding when swerving suddenly or turning on slippery road surfaces. ■ TRAC (Traction Control) Maintains drive power and prevents the rear wheels from spinning when starting the vehicle or accelerating on slippery roads. ■ Hill-start assist control (vehicles with an automatic transmission) Prevents the vehicle from rolling backwards when starting on an incline or slippery slope. ■ EPS (Electric Power Steering) Employs an electric motor to reduce the amount of effort needed to turn the steering wheel. 139 2-4. Using other driving systems ■ VDIM (Vehicle Dynamics Integrated Management) (IS350) Provides integrated control of the ABS, BA, TRAC, VSC, hill-start assist control, and EPS systems. Maintains vehicle stability when swerving on slippery road surfaces by controlling the brakes, engine output, and the movement of the front wheels. ■ PCS (Pre-Collision System) (if equipped) P. 144 When the VSC/TRAC/hill-start assist control systems are operating If the vehicle is in danger of slipping, rolling backwards when starting on an incline, or if the rear wheels spin, the slip indicator light flashes to indicate that the VSC/ TRAC/hill-start assist control systems have been engaged. A buzzer (intermittent) sounds to indicate that VSC is operating. The stop lights and high mounted stoplight turn on when the hill-start assist control system is operating. 140 2-4. Using other driving systems To disable TRAC (2WD vehicles only) If the vehicle gets stuck in fresh snow or mud, TRAC may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free the vehicle. Push the button to turn off TRAC. The slip indicator light should come on. 2 Push the button again to turn the system back on. When driving ■ Automatic TRAC reactivation (IS 350) The TRAC system is reactivated when vehicle speed exceeds 30 mph (50 km/h) even if TRAC OFF has been turned off. ■ Sounds and vibrations caused by the ABS, BA, VSC, TRAC and hill-start assist control systems ● A sound may be heard from the engine compartment when the engine is started or just after the vehicle begins to move. This sound does not indicate that a malfunction has occurred in any of these systems. ● Any of the following conditions may occur when the above systems are operat- ing. None of these indicates that a malfunction has occurred. • • • • Vibrations may be felt through the vehicle body and steering. A motor sound may be heard after the vehicle comes to a stop. The brake pedal may pulsate slightly after the ABS is activated. The brake pedal may move down slightly after the ABS is activated. ■ Hill-start assist control is operational when ● The shift lever is in the D or S position. ● The brake pedal is not depressed. 141 2-4. Using other driving systems ■ Reduced effectiveness of EPS The effectiveness of EPS is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should this occur, refrain from excessive steering input or stop the vehicle and turn the engine OFF. The system should return to normal within 10 minutes. CAUTION Any of the following conditions may result in an accident which could cause death or serious injury: ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded. ● The vehicle hydroplanes while driving at high speed on the wet or slick road. ■ Stopping distance when the ABS is operating will exceed that of normal condi- tions The ABS is not designed to shorten the vehicle’s stopping distance. Always maintain a safe distance from the vehicle in front of you in the following situations. ● When driving on dirt, gravel or snow-covered roads ● When driving with tire chains ● When driving over bumps in the road ● When driving over roads with potholes or roads with uneven roads ■ TRAC may not operate effectively when Directional control and power may not be achievable while driving on slippery road surfaces, even if the TRAC system is operating. Do not drive the vehicle in conditions where stability and power may be lost. ■ If hill-start assist control does not operate effectively (vehicles with an automatic transmission) The hill-start assist control may not operate effectively on steep inclines and roads covered in ice. 142 2-4. Using other driving systems CAUTION ■ When the slip indicator flashes and a warning buzzer sounds This situation occurs immediately while VSC is activated. Always drive carefully. Reckless driving may cause an accident. Exercise particular care when the indicator light flashes and a buzzer sounds. ■ Replacing tires Make sure that all tires are of the same size, brand, tread pattern and total load capacity. In addition, make sure that the tires are inflated to the recommended tire pressure level. ■ Handling of tires and suspension Using tires with any kind of problem or modifying the suspension will affect the VDIM system, and may cause the system to malfunction. 143 When driving The ABS and VSC systems will not function correctly if different tires are fitted on the vehicle. The LSD may also be damaged. Contact your Lexus dealer for further information when replacing tires or wheels. 2 2-4. Using other driving systems PCS (Pre-Collision System) (if equipped) Safety systems such as the brakes and seat belts are automatically engaged to lessen impact and injuries to occupants as well as vehicle damage when the radar sensor detects an unavoidable frontal collision. ■ Pre-collision seat belts The seat belts are immediately retracted as the effect of the pretensioner is increased (P. 31), to provide even greater constraining force to protect the driver and passengers. In the event of sudden braking or skidding, the system will operate even if no obstacle has been detected. ■ Pre-collision brake assist Applies greater braking force in relation to how strongly the brake pedal is depressed. Radar sensor Detects vehicles or other obstacles on or near the road ahead and determines whether a collision is imminent based on the position, speed, and heading of the obstacles. Grille cover Radar sensor ■ Obstacles not detected The sensor cannot detect plastic obstacles such as pylons. There may also be occasions when the sensor cannot detect pedestrians, animals, bicycles, motorcycles, trees, or snowdrifts. 144 2-4. Using other driving systems ■ The pre-collision system is operational when ● Seat belt (linked to the radar sensor) • Vehicle speed is above 3 mph (5 km/h). • The speed at which your vehicle is approaching the obstacle or oncoming vehicle exceeds 18 to 24 mph (30 to 40 km/h). • The front occupants are wearing a seat belt. ● Seat belts (linked to brake operation) • Vehicle speed exceeds 9 mph (15 km/h). • The system detects sudden braking or skidding. • The front occupants are wearing a seat belt. ● Brake Assist 2 ■ Conditions that may trigger the system even if there is no danger of collision ● When there is an object by the roadside at the entrance to a curve ● When passing an oncoming vehicle on a curve ● When driving over a narrow iron bridge ● When there is a metal object on the road surface ● When driving on an uneven road surface ● When passing an oncoming vehicle on a left-turn ● When your vehicle rapidly closes on the vehicle in front When the system is activated in the situations described above there is also a possibility that the seat belts will retract quickly and the brakes will be applied with a force greater than normal. When the seat belt is locked in the retracted position, stop the vehicle in a safe place, release the seat belt and refasten. ■ When there is a malfunction in the system Warning lights and/or warning messages will turn on or flash. (P. 329, P. 334) 145 When driving • Vehicle speed is above 18 mph (30 km/h). • The speed at which your vehicle is approaching the obstacle or the vehicle is greater than 18 to 24 mph (30 to 40 km/h). • The brake pedal is depressed. 2-4. Using other driving systems CAUTION ■ Handling the radar sensor Observe the following to ensure the pre-collision system can function effectively. ● Keep the sensor and front grille clean at all times. Clean the sensor and front grille with a soft cloth so you do not mark or damage them. ● Do not subject the sensor or surrounding area to a strong impact. If the sensor moves even slightly off position, the system may malfunction. If the sensor or surrounding area are subject to a strong impact, always have the area inspected and adjusted by a Lexus dealer. ● Do not disassemble the sensor. ● Do not attach accessories or stickers to the sensor, grille guard or surrounding area. ■ Limitations of the pre-collision system Do not rely on the pre-collision system. Always drive safely, taking care to observe your surroundings and checking for any obstacles or other road hazards. 146 2-5. Driving information Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load. ● Stow cargo and luggage in the trunk whenever possible. Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far forward as possible helps maintain vehicle balance. ● For better fuel economy, do not carry unnecessary weight. 2 When driving Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) — (Total weight of occupants) ■ Steps for determining correct load limit STEP 1 Locate the statement “The combined weight of occupants and cargo should never exceed xxx lb.” on your vehicle’s placard. STEP 2 Determine the combined weight of the driver and passengers that will be riding in your vehicle. STEP 3 Subtract the combined weight of the driver and passengers from xxx kilograms or xxx lb. STEP 4 The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the xxx amount equals 1400 lb. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lb. 1400 750 (1505) = 650 lb. STEP 5 Determine the combined weight of luggage and cargo being loaded on the vehicle. The weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 147 2-5. Driving information STEP 6 If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Lexus does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. Example on your vehicle Cargo capacity Total load capacity When 2 people with the combined weight of 366 lb. (166 kg) are riding in your vehicle, which has a total load capacity of 825 lb. (374 kg), the available amount of cargo and luggage load capacity will be as follows: 825 lb. — 366 lb. = 459 lb. (374 kg —166 kg = 208 kg) In this condition, if 3 more passengers with the combined weight of 388 lb. (176 kg) get on, the available cargo and luggage load will be reduced as follows: 459 lb. — 388 lb. = 71 lb. (208 kg — 176 kg = 32 kg) As shown in the above example, if the number of occupants increases, the cargo and luggage load equaling the combined weight of the occupants who got on later, by an amount. In other words, if an increase in the number of occupants causes an excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you must reduce the cargo and luggage on your vehicle. 148 2-5. Driving information CAUTION ■ Storage precautions ● Do not place anything on the package tray behind the rear seatback. Such items may be thrown about and possibly injure people in the vehicle during sudden braking or in an accident. ● Do not drive with objects on top of the instrument panel. They may interfere with the driver’s field of view or move during sharp acceleration or turning, thus impairing the driver’s control of the vehicle. In an accident they may injure the vehicle occupants. one during an accident or sudden braking. ■ Capacity and distribution ● Do not exceed the maximum axle weight rating or the total vehicle weight rating. ● Even if the total load of occupant's weight and the cargo load is less than the total load capacity, do not apply the load unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury. 149 When driving ● Secure all items in the occupant compartment, as they may shift and injure some- 2 2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. ■ Total load capacity: 825 lb. (374 kg) Total load capacity means the combined weight of occupants, cargo and luggage. ■ Seating capacity: 5 occupants (Front 2, Rear 3) Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ■ Towing capacity Lexus does not recommend towing a trailer with your vehicle. ■ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants. ■ Total load capacity and seating capacity These details are also described on the tire and loading information label. (P. 285) CAUTION ■ Overloading the vehicle Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident. 150 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside temperatures. • • • • Engine oil Engine coolant Washer fluid Have a service technician inspect the level and specific gravity of battery electrolyte. ● Have the vehicle fitted with four snow tires or purchase a set of tire chains for the rear tires. 2 When driving Ensure that all tires are the same size and brand, and that chains match the size of the tires. ● Tire pressure falls in winter as the outside temperature falls. Add 2.9 to 4.3 psi (20 to 30 kPa, 0.2 to 0.3 kgf/cm2 or bar) to the standard tire inflation pressure. 151 2-5. Driving information ■ Before driving the vehicle Perform the following according to the driving conditions. ● Do not try to forcibly open a window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing. ● To ensure proper operation of the climate control system fan, remove any snow that has accumulated on the air inlet vents in front of the windshield. ● Remove any ice that has accumulated on the vehicle chassis. ● Periodically check for and remove any excess ice or snow that may have accumulated in the wheel well or on the brakes. ■ When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suitable to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P (automatic transmission) or R (manual transmission) without setting the parking brake. The parking brake may freeze up, preventing it from being released. 152 2-5. Driving information Selecting snow chains Snow chains can be mounted on 16- and 17-inch tires. They cannot be mounted on 18-inch tires. Use the correct snow chain size when mounting the snow chains. Chain size is regulated for each tire sizes. Side chain (0.12 in. [3 mm] in diameter) Cross chain (0.16 in. [4 mm] in diameter) 2 When driving Regulations on the use of snow chains ● Regulations regarding the use of tire chains vary according to location and type of road. Always check local regulations before installing chains. ● Install the chains on the rear tires. ● Retighten the chains after driving 1/4 - 1/2 mile (0.5 - 1.0 km). 153 2-5. Driving information ■ Snow chain installation Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the rear tires only. Do not install tire chains on front tires. ● Install the tire chains on rear tires as tightly as possible. Retighten chains after driving 1/4 - 1/2 mile (0.5 - 1.0 km). ● Install tire chains following the instructions provided in the accompanying instructions. CAUTION ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury. ● Use tires of the size specified for your vehicle. ● Maintain the recommended level of air pressure. ● Do not drive in excess of 75 mph (120 km/h), regardless of the type of snow tires being used. ● Use snow tires on all, not just some wheels. ■ Driving with snow chains Observe the following precautions to reduce the risk of accidents. Failing to do so may result in the vehicle being unable to be driven safely, and may cause death or serious injury. ● Do not drive in excess of the speed limit specified for the tire chains being used, or 30 mph (50 km/h), whichever is lower. ● Avoid driving on bumpy road surfaces or over potholes. ● Avoid sudden turns and braking, as use of chains may adversely affect vehicle handling. ● Slow down sufficiently before entering a curve to ensure that vehicle control is maintained. 154 2-5. Driving information NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Lexus dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire air pressure sensor. ■ Fitting tire chains The tire air pressure sensor may not function correctly when tire chains are fitted. 2 When driving 155 2-5. Driving information Trailer towing Lexus does not recommend towing a trailer with your vehicle. Lexus also does not recommend the installation of a tow hitch or the use of a tow hitch carrier fo a wheelchair, scooter, bicycle, etc. Your Lexus is not designed for trailer towing or for the use of tow hitch mounted carriers. 156 2-5. Driving information Dinghy towing (vehicles with an automatic transmission) Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. 2 When driving NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with four wheels on the ground. 157 2-5. Driving information Dinghy towing (vehicles with a manual transmission) Your vehicle can be dinghy towed in a forward direction (with 4 wheels on the ground) behind a motor home. Towing your vehicle with 4 wheels on the ground To prevent damage to your vehicle, perform the following procedures before towing. STEP 1 STEP 2 Shift the shift lever to neutral. Switch to ACC mode. (P. 89) Ensure that the audio system and other powered devices have been turned OFF. STEP 3 Release the parking brake. After towing, leave the engine in idle for at least 3 minutes before driving the vehicle. ■ Necessary equipment and accessories Specialized equipment and accessories are required for dinghy towing. Contact the service branch of the motor home manufacturer regarding recommended equipment. 158 2-5. Driving information NOTICE ■ Dinghy towing direction Do not tow the vehicle backwards. Doing so may cause serious damage. 2 When driving ■ To prevent the steering from locking Ensure the engine switch is in ACC mode. 159 2-5. Driving information 160 Interior features 3-1. Using the air conditioning system and defogger........... 162 Automatic air conditioning system .......................................... 162 Rear window and outside rear view mirror defoggers........... 170 3-2. Using the audio system .......... 171 Audio system type ....................... 171 Using the radio............................. 174 Using the CD player.................. 181 Playing back MP3 and WMA discs................................ 187 Optimal use of the audio system .......................................... 195 Using the AUX adapter .......... 198 Using the steering wheel audio switches .......................... 199 3-3. Using the interior lights......... 201 Interior lights list.......................... 201 • Interior lights and personal lights......................... 203 3-4. Using the storage features ................................. 205 List of storage features........... 205 • Glove box ................................ 205 3 • Console boxes........................ 206 • Overhead console ................ 207 • Cup holders ............................. 208 • Bottle holders/door pockets....................................... 209 3-5. Other interior features.......... 211 Sun visors ........................................ 211 Vanity mirror ................................. 212 Clock............................................... 213 Satellite switches......................... 214 Ashtrays .......................................... 217 Cigarette lighter......................... 218 Power outlet ................................. 219 Seat heaters ................................ 220 Seat heaters and ventilators.................................. 222 Armrest......................................... 224 Rear sunshade............................ 225 Extended trunk .......................... 227 Coat hooks.................................. 228 Floor mat ...................................... 229 Trunk features ............................. 230 Garage door opener............... 233 Compass ...................................... 238 161 3-1. Using the air conditioning system and defogger Automatic air conditioning system (without navigation system) Airflow and outlets are automatically adjusted according to the temperature setting. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. Fan speed Fan speed display Off Driver’s side temperature setting display Automatic mode Airflow display Changes the air outlets used Passenger’s side temperature setting display Micro dust and pollen removal mode Passenger’s side temperature control Driver's side temperature control Front windshield defogger Dual operation switch Air conditioning ON/OFF switch Outside air or recirculated mode Using the automatic mode STEP 1 Press . The air conditioning system will begin to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting. STEP 2 Press to switch to automatic mode. (IS350 only) Automatically switches between outside air and recirculated air modes. 162 3-1. Using the air conditioning system and defogger STEP 3 Press to increase the temperature and to decrease the temperature on the switch. The temperature for the driver and passenger seats can be set separately. Adjusting the settings ■ Adjusting the temperature setting Press to increase the temperature and to decrease the temperature on the switch. switch to separately adjust the temperature for the passenger and driver sides (dual mode). Press to return the driver and passenger side temperatures to the same setting (simultaneous mode). The air conditioning system switches between individual and simultaneous modes each time is pressed. ■ Adjusting the fan speed Press (increase) or (decrease) on the Press button. to turn the fan off. 163 Interior features Press (increase) or (decrease) on the 3 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press . The air outlets switch each time the button is pressed. * * * * Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the front windshield defogger operates. *: Only in the automatic mode 164 3-1. Using the air conditioning system and defogger ■ Switching between outside air and recirculated air modes IS250 Press . The mode switches between (recycles air inside the vehicle) and (introduces air from outside the vehicle) modes each time the button is pressed. IS350 Press . The mode switches between (recycles air inside the vehicle), AUTO and (introduces air from outside the vehicle) modes each time the button is pressed. When the system is switched to automatic mode, the air conditioning system operates automatically. Defogging The air conditioning system control operates automatically. Recirculated air mode may automatically switch to (outside air) mode. 165 Interior features Defogging the front windshield 3 3-1. Using the air conditioning system and defogger Micro dust and pollen filter Press . Outside air mode switches to (recirculated air) mode. Pollen is removed from the air and the air flows to the upper part of the body. To stop the operation, press again. Adjusting the sensitivity of the air intake control in automatic mode (IS350 only) STEP 1 Press onds. STEP 2 Press (increase) or (decrease) on the for 2 or more sec- switch. From —3 (low) to 3 (high) can be set. 166 3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Center outlets Direct air flow to the left or right, up or down Turn the knob up to open the vent and down to close the vent Rear seat outlets Direct air flow to the left or right, up or down Turn the knob fully to the outside of the vehicle to close the vent 167 3 Interior features Right and left side outlets Direct air flow to the left or right, up or down Turn the knob right to open the vent and left to close the vent 3-1. Using the air conditioning system and defogger ■ Using the automatic mode Fan speed is adjusted automatically in accordance with the temperature setting and ambient conditions. As a result, the following may occur. ● The system may switch automatically to recirculated mode when the coolest temperature setting is selected in summer. ● Immediately after the switch is pressed, the fan may stop for a while until warm or cool air is ready to flow. ● Cool air may flow to the area around the upper body when the heater is on. ■ Using the system in recirculated air mode The windows will fog up more easily if the recirculated air mode is used for an extended period. ■ Window defogger feature Recirculated air mode may automatically switch to ations where the windows need to be defogged. (outside air) mode in situ- ■ Outside air temperature approaches 32F (0C). The air conditioning system may not operate even when ■ When the indicator light on is pressed. flashes Press and turn off the air conditioning system before turning it on once more. There may be a problem in the air conditioning system if the indicator light continues to flash. Turn the air conditioning system off and have it inspected by your Lexus dealer. ■ Automatic mode for air intake control In automatic mode, the system detects exhaust gas and other pollutants and automatically switches between outside air and recirculated air modes. ■ Micro dust and pollen removal mode ● When the outside air is cold, the following may occur. • Outside air mode does not switch to . • The air conditioning system operates automatically. • The operation cancels after 1 minute. ● In rainy weather, the windows may fog up. Press 168 . 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision. NOTICE ■ To prevent battery discharge Do not leave the automatic air conditioning system on longer than necessary when the engine is stopped. 3 Interior features 169 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers These features are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors. ON/OFF Press the button to turn on the rear window and outside rear view mirror defoggers. The defoggers will automatically turn off after approximately 15 minutes. Pressing the button again also turns the defoggers off. CAUTION ■ When the outside rear view mirror defoggers are on Do not touch the outside surface of the rear view mirror, as it can become very hot and burn you. 170 3-2. Using the audio system Audio system type (without navigation system) Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. CD player with changer and AM/FM radio Type A 3 Interior features Type B 171 3-2. Using the audio system Title Page Using the radio P. 174 Using the CD player P. 181 Palying MP3 and WMA discs P. 187 Optimal use of the audio system P. 195 Using the external audio input port P. 198 Using the steering wheel switches P. 199 ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. CAUTION ■ For vehicles sold in U.S.A. and Canada ● Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. ● Laser products • Do not take this unit apart or attempt to make any changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays remain inside the cabinet. Therefore, never try to disassemble the player or alter any of its parts since you may be exposed to laser rays and dangerous voltages. • This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 172 3-2. Using the audio system NOTICE ■ To prevent battery discharge Do not leave the audio system on longer than necessary with the engine off. ■ To avoid damaging the audio system Take care not to spill drinks or other fluids over the audio system. 3 Interior features 173 3-2. Using the audio system Using the radio Seeking any traffic program station Station selector Displays radio text messages Adjusting the frequency (AM, FM mode) or channel (SAT mode) Changing the program types Power Volume Seeking the frequency AMSAT/FM mode buttons Scans for receivable stations Setting station presets (excluding XM satellite radio) STEP 1 Search for desired stations by turning the or on STEP 2 dial or pressing . Press and hold the button (from be set to, and you hear a beep. to ) the station is to Scanning radio stations (excluding XM satellite radio) ■ Scanning the preset radio stations STEP 1 Press and hold until you hear a beep. Preset stations will be played for 5 seconds each. STEP 2 174 When the desired station is reached, press the button once again. 3-2. Using the audio system ■ Scanning all radio stations within range STEP 1 Press . All stations with reception will be played for 5 seconds each. STEP 2 When the desired station is reached, press the button once again. RDS (Radio Data System) This feature allows your radio to receive station identification information and program information (classical, jazz, etc.) from radio stations which broadcast this information. ■ Receiving RDS broadcasts STEP 1 Press or on the 3 button during FM reception. Interior features The type of program changes each time the button is pressed. ● ROCK ● EASYLIS (Easy listening) ● CLS/JAZZ (Classical music and Jazz) ● R & B (Rhythm and Blues) ● INFORM (Information) ● RELIGION ● MISC (Miscellaneous) ● ALERT (Emergency messages) If the system receives no RDS stations, NO PTY appears on the display. STEP 2 Press , or or on . The radio seeks or scans the station by the relevant program type. ■ Displaying radio station names Press . 175 3-2. Using the audio system ■ Displaying radio text messages Press twice. If MSG shows in the display, a text message will be displayed. If the text continues past the end of the display, hold until you hear a beep. is displayed. Press and XM satellite radio (if equipped) ■ Receiving XM satellite radio STEP 1 Press and hold until SAT shows in the display. The display changes as follows each time the switch is pressed. AM SAT1 SAT2 SAT3 STEP 2 Turn the dial to select the desired channel in the all catego- ries or press or on to select the desired channel in the current category. ■ Setting XM satellite radio channel presets Select the desired channel. Press the button the channel is to be set to (from to ), and you hear a beep. ■ Changing the channel category Press or on the switch. ■ Scanning XM satellite radio channels ● Scanning channels in the current category STEP 1 STEP 2 176 Press . When the desired channel is reached, press the switch again. 3-2. Using the audio system ● Scanning preset channels Press and hold until you hear a beep. STEP 2 When the desired channel is reached, press the switch again. ■ Displaying text information Press . STEP 1 The display will show up to 10 characters. The display changes as follows each time the button is pressed. ● CH NAME ● TITLE (SONG/PROGRAM TITLE) 3 ● NAME (ARTIST NAME/FEATURE) Interior features ● CH NUMBER 177 3-2. Using the audio system ■ When the battery is disconnected Stations presets are erased. ■ Reception sensitivity ● Maintaining perfect radio reception at all times is difficult due to the continually changing position of the antenna, differences in signal strength and surrounding objects, such as trains, transmitters, etc. ● The radio antenna is mounted inside the rear window. To maintain clear radio reception, do not attach metallic window tinting or other metallic objects to the antenna wire mounted inside the rear window. ■ XM satellite radio The optional Lexus genuine satellite radio tuner and antenna allows you to receive and play XM satellite radio broadcasts. (Subscription is required. Not available in Hawaii and Alaska.)* ● XM subscriptions For detailed information about XM satellite radio or to subscribe, visit XM on the web at www.xmradio.com or call (800) 852-9696. ● Radio ID You will need the radio ID when activating XM service or reporting a problem. Select "CH000" using , and the receiver's 8-character ID number will appear. ● Satellite tuner The tuner supports only Audio Services (Music and Talk) and the accompanying Text Information of XM satellite radio. *: Terms and services provided by XM Radio are subject to change without notice. 178 3-2. Using the audio system ■ If the satellite radio does not operate normally If a problem occurs with the XM tuner, a message will appear on the display. Refer to the table below to identify the problem, and take the suggested corrective action. ANTENNA The XM antenna is not connected. Check whether the XM antenna cable is attached securely. There is a short-circuit in the antenna or the surrounding antenna cable. See a Lexus certified dealer. You have not subscribed to the XM satellite radio. The radio is being updated with the latest encryption code. Contact the XM satellite radio for subscription information. When a contract is canceled, you can choose the "CH000" and all free-to-air channels. NO SIGNAL LOADING The premium channel you selected is not authorized. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. If you want to listen to the premium channel, contact the XM satellite radio. Interior features UPDATING 3 The XM signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. The unit is acquiring audio or program information. Wait until the unit has received the information. OFF AIR The channel you selected is not broadcasting any programming. Select another channel. ----- There is no song/program title or artist name/feature associated with the channel at that time. No action needed. 179 3-2. Using the audio system --- The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or "CH001". If it does not change automatically, select another channel. Contact the XM Listener Care Center at (800) 852-9696 during the following hours*. Monday - Saturday: 7 a.m. - 2 a.m. Sunday: 7 a.m. - 7 p.m. Central Standard Time *: Subject to change without notice. ■ Certifications for the radio tuner This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by trying one or more of the following: ● Reorienting or relocate the receiving antenna. ● Increasing the separation between the equipment and receiver. ● Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consulting the dealer or an experienced radio/TV technician for help. 180 3-2. Using the audio system Using the CD player Repeat play Displays text message Random playback Power Volume 3 Track selection Search playback Selecting a CD Interior features CD eject Playback CD insert Loading CDs ■ Loading a CD STEP 1 Push . WAIT is shown on the display. STEP 2 Insert a CD when the indicator on the slot turns from amber to green. The display changes from WAIT to LOAD. ■ Loading multiple CDs STEP 1 Press and hold until you hear a beep. WAIT is shown on the display. STEP 2 Insert a CD when the indicator on the slot turns from amber to green. The display changes from WAIT to LOAD. The indicator on the slot turns to amber when the CD is inserted. 181 3-2. Using the audio system STEP 3 Insert the next CD when the indicator on the slot turns from amber to green again. Repeat the procedure for the remaining CDs. To stop the operation, press . Ejecting CDs ■ Ejecting a CD To select the CD to be ejected, STEP 1 press or on . The number of the CD selected is shown on the display. Press and remove the CD. ■ Ejecting all the CDs Press and hold until you hear a beep, and then remove the CDs. STEP 2 Selecting, fast-forwarding, and scanning tracks ■ Selecting a track Press to move up and to move down using until the desired track number is displayed. To fast forward or rewind, press and hold or on . ■ Scanning a CD STEP 1 Press . The first ten seconds of each track will be played. STEP 2 182 Press the switch again when the desired track is reached. 3-2. Using the audio system Selecting a CD ■ To select a CD to play To select the desired CD, press or on ■ To scan loaded CDs STEP 1 Press and hold . until you hear a beep. The first ten seconds of the first track on each CD will be played. STEP 2 Press the switch again when the desired CD is reached. Random playback 3 Interior features ■ Current CD Press (RAND). Songs are played in random order until random playback is canceled. ■ All CDs Press and hold (RAND) until you hear a beep. Tracks on all loaded CDs are played in a random order until the button is pressed once more. Switching the display Press . Each time the switch is pressed, the display changes in the order of Track no./ Elapsed time CD title Track name. 183 3-2. Using the audio system ■ Canceling random, repeat and scan playback Press (RAND), (RPT), or again. ■ When LOAD, ERROR or WAIT is shown on the display LOAD: This indicates that the CD player has completed loading the CD. ERROR: Make sure the label of the displayed disc is facing up, and then reinsert it in the player. WAIT: Operation is stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Lexus dealer if the CD still cannot be played back. ■ CD compatibility Only music and other audio CDs with the mark shown at left can be used. CD-Rs, CDROMs and CDs with copy-protect features cannot be used. ■ CD player protection feature To protect the internal components, playback is automatically stopped when a problem is detected. ■ If CDs are left inside the CD player or in the ejected position for extended peri- ods CDs may be damaged and may not play properly. ■ Lens cleaners Do not use lens cleaners. Doing so may damage the CD player. 184 3-2. Using the audio system NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs or 3 in. (8 cm) CD adapters. Doing so may damage the CD player and/or the CD insert/eject function. ● CDs that have a diameter that is not 4.7 in. (12 cm). 3 ● Low-quality and deformed CDs. recording area. ● CDs that have had tape, stickers or CD-R labels attached to them, or that have had the label peeled off. 185 Interior features ● CDs with a transparent or translucent 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ● Never try to disassemble any part of the CD player. ● Do not insert more than one CD at a time. 186 3-2. Using the audio system Playing back MP3 and WMA discs Repeat play Selecting a folder Random playback Displays text message Selecting a file Power Volume Selecting a CD CD insert Interior features Selecting Playback a file Search playback CD eject 3 Loading and ejecting MP3 and WMA discs Refer to the section entitled “Using the CD player” for details. (P. 181) Selecting a folder ■ Selecting folders one at a time Press () or () to select the desired folder. ■ Selecting the desired folder by cueing the first file of each folder Press and hold until you hear a beep. When the desired folder is reached, press the switch once again. ■ Returning to the first folder Press and hold () until you hear a beep. 187 3-2. Using the audio system Selecting and scanning files ■ Selecting one file at a time dial or press or on Turn the to select the desired file. ■ Selecting the desired file by cueing the files in the folder Press . When the desired file is reached, press the switch once again. File repeat Press (RPT). Folder repeat Press and hold (RPT) until you hear a beep. Random playback ■ To play files from a particular folder in random order Press (RAND). ■ To play all of the files on a disc in random order Press and hold (RAND) until you hear a beep. Switching the display Press . Each time the switch is pressed, the display changes in the order of Folder no./File no./Elapsed time Folder name File name Album title (MP3 only) Track title Artist name. 188 3-2. Using the audio system ■ Canceling random, repeat and scan playback Press (RAND), (RPT), or again. ■ When LOAD, ERROR or WAIT is shown on the display. LOAD: This indicates that the CD player has completed loading the CD. ERROR: Make sure the label of the displayed disc is facing up, and then reinsert it in the player. WAIT: Operation is stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Lexus dealer if the CD still cannot be played back. NO MUSIC: This indicates that the MP3/WMA file is not included in the CD. ■ CD player protection feature ■ If CDs are left inside the CD player or in the ejected position for extended peri- ods CDs may be damaged and may not play properly. ■ Lens cleaners Do not use lens cleaners. Doing so may damage the CD player. 189 3 Interior features To protect the internal components, playback is automatically stopped when a problem is detected while the CD player is being used. 3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media TMAudio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format. There is a limit to the MP3 and WMA file standards and to the media/formats recorded by them that can be used. ● MP3 file compatibility • Compatible standards MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3) • Compatible sampling frequencies MPEG1 LAYER3: 32, 44.1, 48 (kHz) MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz) • Compatible bit rates MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) • MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps) * Compatible with VBR • Compatible channel modes: stereo, joint stereo, dual channel and monaural ● WMA file compatibility • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates Ver . 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps) *Only compatible with 2-channel playback ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CD-RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints. 190 3-2. Using the audio system ● Compatible disc formats The following disc formats can be used. 191 3 Interior features • Disc formats: CD-ROM Mode 1 and Mode 2 CD-ROM XA Mode 2, Form 1 and Form 2 • File formats: ISO9660 level 1, level 2, (Romeo, Joliet) MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly. Items related to standards and limitations are as follows. • Maximum directory hierarchy: 8 levels • Maximum length of folder names/file names: 32 characters • Maximum number of folders: 192 (including the root) • Maximum number of files per disc: 255 ● File names The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma. ● Multi-sessions As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files. However, only the first session can be played. ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title and artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags. 3-2. Using the audio system ● MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnecessary folders. Discs that contain a mixture of music data and MP3 or WMA format data cannot be played. ● Extensions If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers. ● Playback • To play MP3 file with steady sound quality, we recommend a fixed bit rate of 128 kbps and a sampling frequency of 44.1 kHz. • CD-R or CD-RW playback may not be possible in some instances, depending on the characteristics of the disc. • There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all. • When files other than MP3 or WMA files are recorded on a disc, it may take more time to recognize the disc and in some cases, playback may not be possible at all. • Microsoft, Windows, and Windows Media are the registered trademarks of Microsoft Corporation in the U.S.A. and other countries. 192 3-2. Using the audio system NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs or 3 in. (8 cm) CD adapters. Doing so may damage the CD player and render the CD insert/eject function unusable. ● CDs that have a diameter that is not 4.7 in. (12 cm). 3 ● Low-quality and deformed CDs. Interior features ● CDs with a transparent or translucent recording area. ● CDs that have had tape, stickers or CD-R labels attached to them, or that have had the label peeled off. 193 3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in damage to the CDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ● Never try to disassemble any part of the CD player. ● Do not insert more than one CD at a time. 194 3-2. Using the audio system Optimal use of the audio system Type A Adjusting the sound quality Adjusting the ASL Changing the listening position Changing the sound quality modes 3 Interior features Type B Adjusting the sound quality Adjusting the ASL Changing the sound quality modes 195 3-2. Using the audio system Adjusting the Automatic Sound Levelizer (ASL) Press . The ASL switches between ON and OFF modes each time the switch is pressed. ASL automatically adjusts the volume and tone quality according to the noise level as you drive your vehicle. Changing the listening position (type A only) The sound feel setting can be changed to produce the best sound for each listening position. Press (position selector) to change the setting. The display changes as follows each time the button is pressed. Display Listening position DRIVER Position best suited to the driver’s seat FRONT Position best suited to the driver’s and front passenger seats REAR Position best suited to the rear seats ALL Position best suited to all seats Adjusting sound quality and volume balance ■ Changing sound quality modes Press Pressing the button changes the sound mode in the following order. BASMIDTREFAdBALSURROUND (type B only) ■ Adjusting sound quality Press 196 or to adjust the level. 3-2. Using the audio system Mode displayed Level Bass* BAS -5 to 5 Mid-range* MID -5 to 5 Treble* TRE -5 to 5 Front/rear volume balance FAd Left/right volume balance Surround (type B only) Press Press Low High F7 to R7 Shifts to rear Shifts to front BAL L7 to R7 Shifts to left Shifts to right SURROUND ON/OFF OFF ON *: The sound quality level is adjusted individually in each AMFM or CD mode. 197 3 Interior features Sound quality mode 3-2. Using the audio system Using the AUX adapter This adapter can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Connect the portable audio device. STEP 1 STEP 2 Press . ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself. ■ When using a portable audio device connected to the power outlet Noise may occur during playback. Use the power source of the portable audio device. 198 3-2. Using the audio system Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Power on, select audio source Volume Radio: Select radio stations CD: Select tracks and discs 3 Turning on the power when the audio system is turned OFF. The audio system can be turned off by holding the switch down for 1 second or more. Changing the audio source Press when the audio system is turned ON. The audio source changes as follows each time the button is pressed. FM1FM2CD changerAUXAMSAT1SAT2SAT3 Adjusting the volume Press + on to increase the volume and - to decrease the volume. Hold down the button to continue increasing or decreasing the volume. 199 Interior features Press 3-2. Using the audio system Selecting a radio station STEP 1 Press to select the radio mode. STEP 2 Press or on the switch to select a radio station. To scan for receivable stations, press and hold the switch until you hear a beep. Selecting a track STEP 1 Press to select the CD mode. STEP 2 Press or on the switch to select the desired track. Selecting a disc in the CD player STEP 1 Press to select the CD mode. STEP 2 Press and hold or on switch until a beep is heard. CAUTION ■ To reduce the risk of an accident Exercise care when operating the audio switches on the steering wheel. 200 3-3. Using the interior lights Interior lights list 3 Interior features Front personal lights (P. 203) Front interior light (P. 203) Front overhead courtesy light Rear personal lights (P. 203) Rear interior light Rear overhead courtesy light Shift lever lighting (when engine switch is in ACC or IG-ON mode) Front foot well lighting Front door courtesy lighting Front scuff lighting (if equipped) Outer foot lights Turning the instrument panel light control knob fully to the left disables the shift lever lighting and front foot well lighting. 201 3-3. Using the interior lights ■ Illuminated entry system The following interior lights come on automatically when you approach the vehicle with the electronic key on your person. Note that the illuminated entry system operates only when the interior light switch (door position ON/OFF) is ON. ● Front overhead courtesy light ● Rear overhead courtesy light ● Outer foot light The following lights turn on when any of the doors is unlocked or opened. ● Front interior light ● Rear interior lights ● Front foot well lighting ● Front door courtesy lighting ● Front scuff lighting The following lights turn on for approximately 15 seconds when the engine switch is turned to OFF from the IG-ON or ACC mode. (The lights turn off immediately if the doors are locked or the engine switch is set to ACC or IG-ON mode.) ● Front overhead courtesy light ● Rear overhead courtesy light ■ To prevent the battery from being discharged If the overhead courtesy lights and interior lights remain ON when the door is not fully closed or the interior light switch (door position ON/OFF) is ON, the lights will go off automatically after 20 minutes. ■ Customization Setting (e.g. The time elapsed before lights turn off) can be changed. (P. 395) 202 3-3. Using the interior lights Interior lights and personal lights Interior lights Door position ON/OFF ON/OFF Models without an electric moon roof 3 Interior features Models with an electric moon roof Personal lights ON/OFF Front (models without an electric moon roof) 203 3-3. Using the interior lights Personal lights Front (models with an electric moon roof) Rear 204 3-4. Using the storage features List of storage features Glove box 3 Interior features Glove box Console boxes Cup holders Bottle holders/door pockets Overhead console Glove box Open (push button) Lock with the mechanical key Unlock with the mechanical key 205 3-4. Using the storage features Glove box and console boxes ■ Glove box light The glove box light turns on when the engine switch is in the IG-ON mode. ■ Trunk opener main switch The a trunk opener main switch located in the glove box. ( P. 19) CAUTION ■ Caution while driving Keep the glove box closed. Injuries may result in the event of an accident or sudden braking. Console boxes Front Pull up the knob to release the lock. Slide armrest. Pull up the knob to release the lock. Lift the armrest to open. Rear (if equipped) Press the button to release the lock. Lift the armrest to open. 206 3-4. Using the storage features Console boxes and overhead console ■ Console box light (front) The console box light turn on when the engine switch is in the IG-ON mode. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking. Overhead console CAUTION ■ Items that should not be left in the overhead console Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked. ■ Caution while driving Do not leave the overhead console open while driving. Items may fall out and cause injury. 207 Interior features The overhead console is useful for temporarily storing sunglasses and similar small items. 3 3-4. Using the storage features Overhead console and cup holders Cup holders Front (type A) To open, press down and release the front of the cup holder lid. Front (type B) Press the knob to release the lock. Slide armrest. Rear To open, press in and release the rear cup holder on the rear center armrest. 208 3-4. Using the storage features Cup holders and bottle holders/door pockets ■ Using the front cup holder (type B) to store small items Remove the cup holder insert holding the base part. CAUTION 3 ■ Items unsuitable for the cup holder ■ When not in use Keep the cup holders closed. Injuries may result in the event of an accident or sudden braking. Bottle holders/door pockets The door pocket can be opened and closed. When installing the bottle, close the cap of the bottle. 209 Interior features Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns. 3-4. Using the storage features CAUTION ■ Caution while driving Keep the door pockets closed. Injuries may result in the event of an accident or sudden braking. 210 3-5. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. 3 Interior features 211 3-5. Other interior features Vanity mirror The light turns on when the cover is opened. 212 3-5. Other interior features Clock Adjusts the hour. Adjusts the minutes. Rounds to the nearest hour.* *: e.g. 1:00 to 1:29 1:00 1:30 to 1:59 2:00 ■ The clock is displayed when 3 The engine switch is in ACC or IG-ON mode. Interior features 213 3-5. Other interior features Satellite switches The satellite switches can be used to change the settings of various features. Settings are shown on the multi-information display. ■ Operating the satellite switches STEP 1 Bring up the satellite switch mode on the multi-information display. Press the left selector switch, the main switch, or the right selector switch. STEP 2 Select the item whose setting is to be changed. Press either the left or right selector switch to display the item whose setting is to be changed. STEP 3 Change the settings. Press the main switch to change the settings (e.g. ON/OFF). 214 3-5. Other interior features ■ Items that can be set using the satellite switches Lexus parking assist-sensor (P. 133) ON/OFF (if equipped) Tire pressure warning system initialization (P. 277) ID code selection for tire air pressure system (P. 278) 3 Interior features AFS (Adaptive Front-lighting System) (P. 114) ON/OFF (if equipped) Vehicle speed indicator ON/OFF and speed setting (P. 102) Tacho indicator ON/OFF and engine speed (rpm) setting (P. 103) 215 3-5. Other interior features ■ Changing the settings Each item is displayed and its setting can be changed only in the following conditions: Lexus parking assist-sensor: When the engine switch is in IG-ON mode. Items other than the above: When the engine switch is in IG-ON mode and the vehicle is stopped. ■ Display The display will return to the original display if the satellite switches are not operated for an extended period. Even if the display is in satellite switch mode, it will switch in the event of a warning or when the radar cruise control is used. If this occurs, press any of the satellite switches or DISP switch on the steering wheel to return the display to satellite switch mode. 216 3-5. Other interior features Ashtrays Front Push the back part of the lid to open. Push the lid again to close. Push the lever to remove the ashtray. Rear Pull the ashtray lid to open. Hold the plate down and pull the ashtray upwards to remove. 3 Interior features CAUTION ■ When not in use Keep the ashtray closed. Injuries may result in the event of an accident or sudden braking. NOTICE ■ To prevent fire ● Fully extinguish matches and cigarettes before putting them in the ashtray, then make sure the ashtray is fully closed. ● Do not place paper or any other type of flammable object in the ashtray. 217 3-5. Other interior features Cigarette lighter Push the back part of the lid to open, and push the cigarette lighter down. The cigarette lighter will pop up when it is ready for use. ■ The cigarette lighter can be used when The engine switch is in ACC or IG-ON mode. CAUTION ■ To avoid burns or fires ● Do not touch the metal parts of the cigarette lighter. ● Do not hold the cigarette lighter down. It could overheat and cause a fire. ● Do not insert anything other than the cigarette lighter into the outlet. 218 3-5. Other interior features Power outlet The power outlet can be used for 12 V accessories that run on less than 10 A. 3 ■ The power outlet can be used when Interior features The engine switch is in ACC or IG-ON mode. NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit. ■ To prevent the fuse from being blown Do not use an accessory that uses more than 12 V 10 A. ■ To prevent the battery from being discharged Do not use the power outlet longer than necessary when the engine is not running. 219 3-5. Other interior features Seat heaters (if equipped) Heats the seats Driver’s seat Front passenger’s seat The indicator light comes on. The higher the number, the warmer the seats become. Vehicles with an automatic transmission Heats the seats Driver’s seat Front passenger’s seat Vehicles with a manual transmission ■ The seat heaters can be used when The engine switch is in IG-ON mode. ■ When not in use Set the dial to 0. The indicator light turns off. 220 The indicator light comes on. The higher the number, the warmer the seats become. 3-5. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • • • • Babies, small children, the elderly, the sick and the disabled Persons with sensitive skin Persons who are fatigued Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.) ● Do not cover the seat with anything when using the seat heater. Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating. ■ To prevent seat heater damage Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat. ■ To prevent battery discharge Turn the switches off when the engine is not running. 221 Interior features NOTICE 3 3-5. Other interior features Seat heaters and ventilators (if equipped) The seat heaters and ventilators heat the seats and maintain good airflow by blowing air from the seats. Heats the seats Driver’s seat Front passenger’s seat The indicator light (red) comes on. The higher the number, the warmer the seats become. Blows air from the seats Vehicles with an automatic transmission The indicator light (green) comes on. The higher the number, the stronger the airflow becomes. Heats the seats Driver’s seat Front passenger’s seat The indicator light (red) comes on. The higher the number, the warmer the seats become. Blows air from the seats Vehicles with a manual transmission The indicator light (green) comes on. The higher the number, the stronger the airflow becomes. ■ The seat heaters and ventilators can be used when The engine switch is in IG-ON mode. ■ When not in use Set the dial to 0. The indicator light turns off. 222 3-5. Other interior features CAUTION ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • • • • Babies, small children, the elderly, the sick and the disabled Persons with sensitive skin Persons who are fatigued Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.) ● Do not cover the seat with anything when using the seat heater. Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating. ■ To prevent seat heater damage Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat. ■ To prevent battery discharge Turn the switches off when the engine is not running. 223 Interior features NOTICE 3 3-5. Other interior features Armrest Pull the armrest down for use. NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest. 224 3-5. Other interior features Rear sunshade (if equipped) The rear sunshade can be raised and lowered by operating the switch shown below. Raise/lower 3 To ensure adequate rear visibility, the sunshade automatically lowers when the gear is shifted to R. However, the rear sunshade is raised again if either of the following occurs: ● The switch is pressed again. ● The shift lever is shifted out of R, and the vehicle reaches a speed of 9 mph (15 km/h). If the engine is turned off when the rear sunshade has been lowered due to the reverse operation feature, it will not be raised even when the engine is turned on again and the vehicle reaches a speed of 9 mph (15 km/h). To raise the sunshade again, press the switch. ■ The rear sunshade can be used when The engine switch is in IG-ON mode. CAUTION ■ When the rear sunshade is being raised or lowered Do not place fingers or other objects in the fastener section or in the opening. They may get caught, causing injury. 225 Interior features ■ Reverse operation feature 3-5. Other interior features NOTICE ■ To prevent the battery from being discharged Do not operate the rear sunshade when the engine is not running. ■ To ensure normal operation of the sunshade Observe the following precautions. ● Do not place excessive load on the motor or other components. ● Do not place objects where they may hinder opening and closing operations. ● Do not attach items to the rear sunshade. ● Keep the opening clean and clear of obstructions. ● Do not operate the rear sunshade continuously over long periods of time. 226 3-5. Other interior features Extended trunk Long objects can be loaded in the vehicle by utilizing the trunk space and rear seat area. Pull down the rear seat armrest. STEP 2 Open the inside trunk door from the trunk and load baggage or other items. CAUTION ■ When not in use Ensure that the inside trunk door is closed. In the event of sudden braking, items stored in the trunk may be thrown forward into the cabin, resulting in injury. 227 3 Interior features STEP 1 3-5. Other interior features Coat hooks Pull out the hooks to hang coats or other soft items. CAUTION ■ Items that must not be hung on the hook Do not hang a coat hanger or other hard or sharp object on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles that cause death or serious injury. 228 3-5. Other interior features Floor mat Securely place a mat that matches the size of the space on the carpet. Secure the driver’s floor mat using the hooks provided. 3 CAUTION Make sure the floor mat is properly placed on the floor carpet. If the floor mat slips and interferes with the movement of the pedals during driving, it may cause an accident. 229 Interior features ■ When inserting the floor mat 3-5. Other interior features Trunk features ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Shopping bag hooks ■ First-aid kit storage belt (if equipped) Loosen Tighten 230 3-5. Other interior features ■ Warning triangle storage belt Loosen Tighten ■ Luggage mat Pull the lever upwards when lifting the luggage mat up. 3 Interior features The lever can be hooked on the edge of the trunk. CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their positions when they are not in use. 231 3-5. Other interior features NOTICE ■ When closing the trunk Do not leave the luggage mat lever hooked on the edge of the trunk. The luggage mat may get damaged. 232 3-5. Other interior features Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, and other devices. The garage door opener (HomeLink Universal Transceiver) is manufactured under license from HomeLink. Programming the HomeLink (for U.S.A. owners) The HomeLink compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device. Interior features Indicator Buttons ■ Programming the HomeLink STEP 1 3 Point the remote control for the device 1 to 3 in. (25 to 75 mm) from the HomeLink control buttons. Keep the indicator light on the HomeLink in view while programming. 233 3-5. Other interior features STEP 2 Press and hold down one of the buttons on the HomeLink and the button on the transmitter. When the indicator light on the HomeLink changes from a slow to a rapid flash after 20 seconds, you can release both buttons. STEP 3 Test the operation of the HomeLink by pressing the newly programmed button. If programming a garage door opener, check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the Rolling Code type. Press and hold the programmed HomeLink button. The garage door has the rolling code feature if the indicator light (on the HomeLink) flashes rapidly for 2 seconds and then remains lit. If your transmitter is the Rolling Code type, proceed to the heading “Programming a rolling code system”. STEP 4 234 Repeat the steps above to program another device for each of the remaining HomeLink buttons. 3-5. Other interior features ■ Programming a Rolling Code system (for U.S.A. owners) If your device is Rolling Code equipped, follow the steps under the heading “Programming the HomeLink” before proceeding with the steps listed below. STEP 1 Locate the training button on the ceiling mounted garage door opener motor. The exact location and color of the button may vary by brand of garage door opener. Refer to the operation manual supplied with the garage door opener for the location of the training button. STEP 2 STEP 3 Press the training button. Press and release the vehicle’s programmed HomeLink button twice. The garage door may open. The ceiling mounted garage door opener motor should now recognize the HomeLink transceiver and operate the garage door. Repeat the steps above to program another rolling code system for any of the remaining HomeLink buttons. ■ Programming an entry gate (for U.S.A. owners)/Programming all devices in the Canadian market STEP 1 Place your transmitter 1 to 3 in. (25 to 75 mm) away from the surface of the HomeLink. STEP 4 Keep the indicator light on the HomeLink in view while programming. STEP 2 STEP 3 STEP 4 Press and hold the selected HomeLink button. Repeatedly press and release (cycle) the device’s remote control button for two seconds each until step 4 is complete. When the indicator light on the HomeLink compatible transceiver start to flashing rapidly, release the buttons. 235 Interior features If the garage door opens, the programming process is complete. If the door does not open, press and release the button a third time. This third press and release will complete the programming process by opening the garage door. 3 3-5. Other interior features Test the operation of the HomeLink by pressing the newly programmed button. Check to see if the gate/device operates correctly. STEP 6 Repeat the steps above to program another device for each of the remaining HomeLink buttons. ■ Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Lexus dealer for assistance. STEP 5 ■ Reprogramming a button The individual HomeLink buttons cannot be erased but can be reprogrammed. To reprogram a button, follow the “Basic programming” instructions. Operating the HomeLink Press the appropriate HomeLink button. The HomeLink indicator light on the HomeLink transceiver should turn on. The HomeLink continues to send a signal for up to 20 seconds as long as the button is pressed. Erasing the entire HomeLink memory (all three programs) Press and hold down the 2 outside buttons for 20 seconds until the indicator light flashes. If you sell your vehicle, be sure to erase the programs stored in the HomeLink memory. 236 3-5. Other interior features ■ Before programming ● Install a new battery in the transmitter. ● The battery side of the transmitter must be pointed away from the HomeLink. ■ Certification for the garage door opener This device complies with Part 15 of the FCC Rules and with RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: This transmitter has been tested and complies with FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. ■ When programming a garage door or other remote control device The garage door may operate, so ensure people and objects are out of danger to prevent potential harm. ■ Conforming to federal safety standards Do not use the HomeLink Compatible Transceiver with any garage door opener or device that lacks safety stop and reverse features as required by federal safety standards. This includes any garage door that cannot detect an obstruction object. A door or device without these features increases the risk of death or serious injury. 237 Interior features CAUTION 3 3-5. Other interior features Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, push AUTO for longer than 3 seconds. Push and hold the button for 3 seconds or more. ■ Displays and directions 238 Display Direction N North NE Northeast E East SE Southeast S South SW Southwest W West NW Northwest 3-5. Other interior features Calibrating the compass 3 If you cross over a map boundary shown in illustration, the compass will deviate. To obtain higher precision or perfect calibration, refer to the following. ■ Deviation calibration STEP 1 Stop the vehicle where it is safe to drive in a circle. Press AUTO until a number (1 to STEP 2 15) appears on the compass display. STEP 3 Press AUTO, and referring to the map above, select the number of the zone where you are. 239 Interior features The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. 3-5. Other interior features STEP 4 Press AUTO again. If the direction is displayed several seconds after adjustment, the calibration is complete. ■ Circling calibration If CAL appears on the display, drive the vehicle at 5 mph (8 km/ h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until the direction is displayed. ■ Conditions unfavorable to correct operation The compass may not show the correct direction in the following conditions: ● The vehicle is stopped immediately after turning. ● The vehicle is on an inclined surface. ● The vehicle is in a place where the earth's magnetic field is subject to interfer- ence by artificial magnetic fields (underground car park/parking lot, under a steel tower, between buildings, roof car park/parking lot, near an intersection, near a large vehicle, etc.). ● The vehicle has become magnetized. (There is a magnet or metal object near the inside rear view mirror.) ● The battery has been disconnected. ● A door is open. 240 3-5. Other interior features CAUTION ■ While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped. ■ When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in the neighborhood. Do not violate any local traffic rules while performing circling calibration. NOTICE ■ To avoid the compass malfunctions 3 Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor. ● Do not perform circling calibration of the compass in a place where the earth's magnetic field is subject to interference by artificial magnetic fields. ● During calibration, do not operate electric systems (moon roof, power windows, etc.) as they may interfere with the calibration. 241 Interior features ■ To ensure normal operation of the compass 3-5. Other interior features 242 Maintenance and care 4 4-1. Maintenance and care ......... 244 Air conditioning filter ............... 291 Cleaning and protecting the vehicle exterior................ 244 Electronic key battery............. 293 Cleaning and protecting the vehicle interior ................. 246 Checking and replacing fuses............................................. 295 Headlight aim ............................. 309 Light bulbs..................................... 310 4-2. Maintenance........................... 249 Maintenance requirements............................ 249 General maintenance .............. 251 Emission inspection and maintenance (I/M) programs ................................... 254 4-3. Do-it-yourself maintenance......................... 255 Do-it-yourself service precautions............................... 255 Hood.............................................. 258 Positioning the jack................... 259 Engine compartment................. 261 Tires ................................................. 275 Tire inflation pressure.............. 285 Wheels........................................... 289 243 4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. Wash the vehicle body using a sponge or soft cloth, such as a chamois. ● For hard-to-remove marks, use car wash soap and rinse thoroughly with water. ● Wipe away any water. ● Wax the vehicle when the waterproof coating deteriorates. If water does not bead on a clean surface, apply wax when the vehicle body is cool. ■ Automatic car washes ● Fold the mirrors back before washing the vehicle. ● Brushes used in automatic car washes may scratch the vehicle surface and harm your vehicle’s paint. ■ High pressure automatic car washes Do not allow the nozzles of the car wash to come within close proximity of the windows. Before entering an automatic car wash, check that the fuel filler door on your vehicle is closed properly. ■ Aluminum wheels Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the point. ■ Bumpers and side moldings Do not scrub with abrasive cleaners. 244 4-1. Maintenance and care ■ To prevent deterioration and do by corrosion ● Wash the vehicle immediately in the following cases: • • • • • After driving near the sea coast After driving on salted roads If you see coal tar or tree sap on the paint surface If you see dead insects or insect droppings on the paint After driving in an area contaminated with soot, oily smoke, mine dust, iron powder or chemical substances • If the vehicle becomes heavily soiled in dust or mud • If liquids such as benzene and gasoline are spilled on the paint surface ● If the paint is chipped or scratched, have it repaired immediately. CAUTION ■ Caution about the exhaust pipe Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns. 4 Maintenance and care NOTICE ■ To protect your vehicle’s painted surfaces Do not use organic cleaners such as benzene or gasoline. ■ Cleaning the exterior lights Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights. 245 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water. ■ Cleaning the leather areas ● Remove dirt and dust using a vacuum cleaner. ● Wipe any excess dirt and dust with a soft cloth dampened with diluted detergent. Use a diluted water solution of approximately 5% neutral wool detergent. ● Wring out any excess water from the cloth and thoroughly wipe off all remaining traces of detergent. ● Wipe the surface with a dry, soft cloth to remove any remaining moisture. Allow the leather to dry in shaded and ventilated area. ■ Synthetic leather areas ● Remove loose dirt using a vacuum cleaner. ● Apply a mild soap solution to the synthetic leather using a sponge or soft cloth. ● Allow the solution to soak in for a few minutes. Remove the dirt and wipe off the solution with a clean, damp cloth. 246 4-1. Maintenance and care ■ Cleaning the inside of the rear window Do not use glass cleaner to clean the rear window, as this may cause damage to the rear window defogger heater wires. Use a cloth dampened with lukewarm water to gently wipe the window clean. Wipe the window in strokes running parallel to the heater wires. ■ Caring for leather areas Lexus recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not apply water. The excellent results are obtained by keeping the carpet as dry as possible. ■ Seat belts Clean with mild soap and lukewarm water using a cloth or sponge. Also check the belts periodically for excessive wear, fraying or cuts. 4 CAUTION ● Be careful not to splash or spill liquid on the floor. ● Do not get any of the SRS components or wiring in the vehicle interior wet. (P. 57) Electrical malfunction may cause the airbags to deploy or not function properly, resulting in death or severe injury. 247 Maintenance and care ■ Water in the vehicle 4-1. Maintenance and care NOTICE ■ Cleaning detergents Do not use the following types of detergent, as they may discolor the vehicle interior or cause streaks or damage to painted surfaces. ● Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, or bleach. ● Seats: Acidic solutions, such as thinner, benzene, or alcohol. ■ Preventing damage to leather surfaces Observe the following precautions to avoid damage to and deterioration of leather surfaces. ● Remove any dust or dirt on leather surfaces immediately. ● Do not expose the vehicle to direct sunlight for extended periods of time. Park the vehicle in the shade, especially during summer. ● Do not place items made of vinyl, plastic, or that contain wax on the upholstery, as they may stick to the leather surface if the vehicle interior heats up significantly. ■ Water on the floor Do not wash the vehicle floor with water. Vehicle systems such as the audio system may be damaged if water comes into contact with electrical components under the floor of the vehicle, and may also cause the body to rust. ■ Cleaning the inside of the rear window Be careful not to scratch or damage the heater wires or antenna. 248 4-2. Maintenance Maintenance requirements To ensure safe and economical driving, day-to-day care and regular maintenance is essential. It is the owner’s responsibility to perform regular checks. Lexus recommends the following maintenance. ■ General maintenance Should be performed on a daily basis. This can be done by yourself or by a Lexus dealer. ■ Scheduled maintenance Should be performed at specified intervals according to the maintenance schedule. For details about maintenance items and schedules, refer to the “Owner’s Manual Supplement/Scheduled Maintenance”. ■ Do-it-yourself maintenance You can perform some maintenance procedures yourself. Please be aware that do-it-yourself maintenance may affect warranty coverage. For details about warranty coverage, see the separate “Owner’s Guide”, “Owner’s Manual Supplement” or “Warranty Booklet”. ■ Repair and replacement It is recommended that genuine Lexus parts be used for repair to ensure performance of each system. If non-Lexus parts are used in replacement or if a repair shop other than a Lexus dealer performs repairs, confirm the warranty coverage. 249 Maintenance and care The use of Lexus Repair Manuals is recommended. 4 4-2. Maintenance ■ Allow inspection and repairs to be performed by a Lexus dealer ● Lexus technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle. ● Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your Lexus dealer will promptly take care of it. CAUTION ■ Warning in handling of battery ● Engine exhaust, some of its constituents, and a wide variety of automobile com- ponents contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area. ● Oils, fuels and fluids contained in vehicles as well as waste produced by compo- nent wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid exposure and wash any affected area immediately. ● Battery posts, terminals and related accessories contain lead and lead com- pounds which are known to cause brain damage. Wash your hands after handling. (P. 271) ● Used engine oil contains chemicals that have been shown to cause cancer in lab- oratory animals. Avoid prolonged and repeated contact. Always protect your skin by washing thoroughly with soap and water. 250 4-2. Maintenance General maintenance Listed below are the general maintenance items that should be performed at the intervals specified in the “Owners Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Lexus dealer or qualified service shop for advice. Engine compartment Items Check points Maintenance-free. (P. 271) Brake fluid At the correct level? (P. 270) Engine coolant At the correct level? (P. 268) Engine oil At the correct level? (P. 264) Exhaust system No fumes or strange sounds? Radiator/condenser/hoses Not blocked with foreign matter? (P. 270) Washer fluid At the correct level? 4 Maintenance and care Battery (P. 274) 251 4-2. Maintenance Vehicle interior Items 252 Check points Accelerator pedal • Moves smoothly (without uneven pedal effort or catching)? Automatic transmission “Park” mechanism • Can the vehicle be hold securely on an incline with the shift lever in P? Brake pedal • Moves smoothly? • Does it have appropriate clearance and correct amount of free play? Brakes • Not pull to one side when applied? • Loss of brake effectiveness? • Spongy feeling brake pedal? • Pedal almost touches floor? Head restraints • Move smoothly and lock securely? Indicators/buzzers • Function properly? Lights • Do all the lights come on? • Headlights aimed correctly? (P. 309) Parking brake • Moves smoothly? • Can hold the vehicle securely on an incline? Seat belts • Does the seat belt system operate smoothly? • Are the belts undamaged? Seats • Do the seat controls operate properly? 4-2. Maintenance Items Steering wheel Check points • Moves smoothly? • Has correct free play? • No strange noises? Vehicle exterior Items Check points • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after parking? Tire • Inflation pressure is correct? • Tire surfaces not worn or damaged? • Tires rotated according to the maintenance schedule? • Wheel nuts are not loose? 4 CAUTION ■ If the engine is running Turn the engine off and ensure that there is adequate ventilation before performing maintenance checks. 253 Maintenance and care Door/trunk 4-2. Maintenance Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. ■ If the electronic engine control system warning light comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Lexus dealer to service the vehicle. ■ Your vehicle may not pass the I/M test: ● When the battery is disconnected or discharged Readiness codes that are set during ordinary driving are erased. Also, depending on your driving habits, the readiness codes may not be completely set. ● When the fuel tank cap is loose The electronic engine control system warning light comes on as a temporary malfunction and your vehicle may not pass the I/M test. ■ When the electronic engine control system warning light goes off after several driving trips The error code in the OBD system will not be cleared unless the vehicle is driven 40 or more times. ■ If your vehicle does not pass the I/M test Contact your Lexus dealer to prepare the vehicle for re-testing. 254 4-3. Do-it-yourself maintenance Do-it-yourself service precautions If you perform maintenance yourself, be sure to follow the correct procedure given in these sections. Items Battery condition Brake fluid level (P. 271) • Warm water • Baking soda • Grease • Conventional wrench (for terminal clamp bolts) (P. 270) • FMVSS No.116 DOT 3 or SAE J1703 brake fluid • Rag or paper towel • Funnel (used only for adding brake fluid) (P. 268) • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology. For the U.S.A.: “Toyota Super Long Life Coolant” is pre-mixed with 50% coolant and 50% deionized water. For Canada: “Toyota Super Long Life Coolant” is pre-mixed with 55% coolant and 45% deionized water. • Funnel (used only for adding engine coolant) 255 4 Maintenance and care Engine coolant level Parts and tools 4-3. Do-it-yourself maintenance Items Parts and tools Engine oil level (P. 264) • “Toyota Genuine Motor Oil” or equivalent • Rag or paper towel, funnel (used only for adding engine oil) Fuses (P. 295) • Fuse with same amperage rating as original Tire inflation pressure (P. 285) • Tire pressure gauge • Compressed air source Headlight aim (P. 309) • Phillips-head screwdriver Radiator and condenser (P. 270) Washer fluid (P. 274) • Water washer fluid containing antifreeze (for winter use) • Funnel CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury. ■ When working on the engine compartment: ● Keep hands, clothing, and tools away from the moving fan and engine drive belt. ● Be careful not to touch the engine, radiator, exhaust manifold, etc. right after driv- ing as they may be hot. Oil and other fluids may also be hot. ● Do not leave anything that may burn easily, such as paper or rags, in the engine compartment. ● Do not smoke, cause sparks or expose an open flame to fuel or the battery. Fuel and battery fumes are flammable. ● Be extremely cautious when working on the battery. It contains poisonous and corrosive sulfuric acid. 256 4-3. Do-it-yourself maintenance CAUTION ■ When working near the electric cooling fan or radiator grille: Be sure the engine switch is OFF. With the engine switch in IG-ON mode, the electric cooling fan may automatically start to run if the air conditioning is on and/or the coolant temperature is high. (P. 270) ■ Safety glasses Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting in the eyes. NOTICE ■ If you remove the air cleaner: Driving with the air filter removed may cause excessive engine wear due to dirt in the air. Also a backfire could cause a fire in the engine compartment. 4 Maintenance and care 257 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. STEP 1 Pull the hood release lever. The hood will pop up slightly. STEP 2 Lift the hood catch and lift the hood. CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. 258 4-3. Do-it-yourself maintenance Positioning the jack When raising your vehicle with the jack, position the jack correctly. Improper placement may damage your vehicle or cause injury. ■ Front 2WD AWD 4 Maintenance and care ■ Rear 259 4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle: Make sure to observe the following to reduce the possibility of death or serious injury. ● Do not put any part of your body or get underneath the vehicle supported only by the jack. Always use automotive jack stands or a solid, level, surface. ● Do not start the engine while the vehicle is supported by the jack. ● Stop the vehicle on level firm ground, firmly set the parking brake and put the shift lever in P (automatic) or R (manual). ● Make sure to set the jack properly at the jack point. Raising the vehicle with an improperly positioned jack will damage the vehicle and may cause the vehicle to fall off the jack. ● Do not raise the vehicle while someone is in the vehicle. ● When raising the vehicle, do not place any objects on top of or underneath the jack. 260 4-3. Do-it-yourself maintenance Engine compartment IS350 4 Washer fluid tank (P. 274) Electric cooling fans Condenser (P. 270) Radiator (P. 270) Engine coolant reservoir (P. 268) Maintenance and care Battery (P. 271) Engine oil level dipstick (P. 264) Engine oil filler cap (P. 264) Brake fluid reservoir (P. 270) Fuse boxes (P. 295) 261 4-3. Do-it-yourself maintenance IS250 Battery (P. 271) Engine oil level dipstick (P. 264) Engine oil filler cap (P. 264) Brake fluid reservoir (P. 270) Fuse boxes (P. 295) 262 Washer fluid tank (P. 274) Electric cooling fans Condenser (P. 270) Radiator (P. 270) Engine coolant reservoir (P. 268) 4-3. Do-it-yourself maintenance Engine compartment cover ■ Removing the engine compartment cover Front Right-hand side 4 Maintenance and care Left-hand side 263 4-3. Do-it-yourself maintenance ■ Installing the clips Open Insert Press Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP 1 Park the vehicle on level ground. After turning off the engine, wait a few minutes for the oil to drain back into the bottom of the engine. Hold a rag under the end and pull STEP 2 the dipstick out. STEP 3 STEP 4 STEP 5 264 Wipe the dipstick clean. Reinsert the dipstick fully. Holding a rag under the end, pull the dipstick out and check the oil level. 4-3. Do-it-yourself maintenance STEP 6 Wipe the dipstick and reinsert it fully. Low Full ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. 4 Oil grade Oil capacity (when adding) Items STEP 1 STEP 2 STEP 3 ILSAC multi-grade engine oil 1.6 qt. (1.5 L, 1.3 Imp. qt.) Clean funnel Remove the oil filler cap. Add engine oil slowly, checking the dipstick. Install the filler cap, turning it clockwise. 265 Maintenance and care Make sure to check the oil type and prepare the items needed before adding oil. 4-3. Do-it-yourself maintenance ■ Recommended viscosity SAE 5W-30 is the best choice for good fuel economy and good starting in cold weather. Temperature range anticipated before next oil change. If SAE 5W-30 is not available, SAE 10W-30 may be used. However, it should be replaced with SAE 5W30 at the next oil change. ■ How to read oil container labels Some oil containers are labeled with ILSAC certification marks that help you to select the proper oil. 266 4-3. Do-it-yourself maintenance ■ Engine oil consumption ● The amount of engine oil consumed depends on the oil viscosity, the quality of the oil and the way the vehicle is driven. ● More oil is consumed under driving conditions such as high speeds and fre- quent acceleration and deceleration. ● A new engine consumes more oil. ● When judging the amount of oil consumption, keep in mind that the oil may have become diluted, making it difficult to judge the true level accurately. ● Oil consumption: Max. 1.1 qt./600 miles, 0.9 lmp.qt./600 miles (1.0 L per 1000 km) ● If you consume more than 1.1 qt. (1.0 L, 0.9 lmp.qt.) every 600 miles (1000 km), contact your Lexus dealer. ■ Changing the engine oil (U.S.A. only) To reset the oil change system, follow the procedure below: 1. Turn the engine switch OFF. CAUTION ■ Used engine oil ● Used engine oil contains potentially harmful contaminants which may cause skin disorders such as inflammation or skin cancer, so care should be taken to avoid prolonged and repeated contact. To remove used engine oil from your skin, wash thoroughly with soap and water. ● Dispose of used oil and filters only in a safe and acceptable manner. Do not dis- pose of used oil and filters in household trash, in sewers or onto the ground. Call your Lexus dealer, service station or auto parts store for information concerning recycling or disposal. ● Do not leave used engine oil within the reach of children. 267 4 Maintenance and care 2. While pressing the trip meter reset knob (P. 100), set the engine switch to the IG-ON mode. Continue to press and hold the knob until the trip meter displays 000000. 4-3. Do-it-yourself maintenance NOTICE ■ To prevent serious engine damage: Check the oil level on regular basis. ■ When replacing the engine oil ● Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, or the engine could be damaged. ● Check the oil level on the dipstick every time you refill the vehicle. ● Be sure the engine oil filler cap is properly retightened. Engine coolant The coolant level is satisfactory if it is between the FULL and LOW lines on the reservoir when the engine is cold. Reservoir cap Full Low If the level is on or below the LOW line, add coolant up to the FULL line. 268 4-3. Do-it-yourself maintenance ■ If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, engine coolant filler cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Lexus dealer pressure test the cap and check for leaks in the cooling system. ■ Coolant selection Only use Toyota Super Long Life Coolant or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. U.S.A.: Toyota Super Long Life Coolant is a mixture of 50% coolant and 50% deionized water. (Enabled: -31F [-35C]) Canada: Toyota Super Long Life Coolant is a mixture of 55% coolant and 45% deionized water. (Enabled: -44F [-42C]) For more details about engine coolant, contact your Lexus dealer. 4 CAUTION Do not remove the radiator cap. The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing burns or other injuries. NOTICE ■ When adding engine coolant Coolant is neither plain water not straight antifreeze. The correct mixture of water and anti freeze must be used to provide proper lubrication, corrosion protection and cooling. Be sure to read the antifreeze or coolant label. ■ If you spill coolant Be sure to wash it off with water to prevent it damaging parts or paint. 269 Maintenance and care ■ When the engine is hot 4-3. Do-it-yourself maintenance Radiator and condenser Check the radiator and condenser and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Lexus dealer. CAUTION ■ When the engine is hot Do not touch the radiator or condenser, as they may be hot and you may be burned. Brake fluid ■ Checking fluid level The brake fluid level should be between the MAX and MIN lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Fluid type Items FMVSS No.116 DOT 3 or SAE J1703 brake fluid Clean funnel ■ Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid. 270 4-3. Do-it-yourself maintenance CAUTION ■ When filling the reservoir Take care because brake fluid can harm your hands or eyes and damage painted surfaces. If fluid gets in your eyes, flush your eyes with clean water immediately. If you still experience discomfort, see a doctor. NOTICE ■ If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high. If the reservoir needs frequent refilling, it may indicate a serious problem. Battery 4 Check the battery as follows. Terminals Hold-down clamp 271 Maintenance and care ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. 4-3. Do-it-yourself maintenance ■ Checking battery condition Check the battery condition using the indicator color. Blue: Good condition White: Charging is necessary. Have the vehicle inspected by your Lexus dealer. Red: Not working properly, have the battery checked by your Lexus dealer. ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging: ● If recharging with the battery installed on the vehicle, be sure to disconnect the ground cable. ● Make sure the power switch on the charger is off when connecting and discon- necting the charger cables to the battery. ■ After recharging the battery The engine may not start. Follow the procedure below to initialize the system. 1. Shift the shift lever to P (automatic) or depress the brake pedal with the shift lever in N (manual). 2. Open and close any of the doors. 3. Restart the engine. 272 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the battery: A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near battery: ● Do not cause sparks by touching the battery terminals with tools. ● Do not smoke or light a match near the battery. ● Avoid contact with eyes, skin and clothes. ● Never inhale or swallow electrolyte. ● Wear protective safety glasses when working near the battery. ● Keep children away from the battery. ■ Where to safety charge the battery Always charge the battery in an open area. Do not charge the battery in a garage or closed room where there is not sufficient ventilation. 4 ■ How to recharge the battery ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immediate medical attention. If possible, continue to apply water with a sponge or cloth while traveling to the nearest medical facility. ● If electrolyte gets on your skin Wash the affected area thoroughly. If you feel pain or burning, get medical attention immediately. ● If electrolyte gets on your clothes It can seak through clothing on to your skin. Immediately take off the clothing and follow the procedure above if necessary. ● If you accidentally swallow electrolyte Drink a large quantity of water or milk. Follow with milk of magnesia, beaten raw egg or vegetable oil. Get emergency medical attention immediately. 273 Maintenance and care Only perform a slow charge (5 A or less). The battery may explode if charged at a quicker rate. 4-3. Do-it-yourself maintenance NOTICE ■ When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. Washer fluid If any washer does not work or the warning message appears on the multi-information display, the washer tank may be empty. Add washer fluid. NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. ■ Diluting washer fluid Dilute washer fluid with water as necessary. Refer to the freezing temperatures listed on the washer fluid tank. 274 4-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance schedules and tread wear. ■ Checking tires New tread Tread wear indicator Worn tread The location of tread wear indicators is shown by the TWI or marks, etc., molded on the sidewall of each tire. Check spare tire condition and pressure if not rotated. ■ Tire rotation 2WD models with 16-inch tires and AWD models Rotate the tires in the order shown. Do not fail to initialize the tire inflation warning system after tire rotation. 2WD models with 17-inch tires or 18-inch tires Tires cannot be rotated. 275 Maintenance and care Front Lexus recommends tire rotation in accordance with the maintenance schedule to equalize tire wear and extend tire life. 4 4-3. Do-it-yourself maintenance ■ The tire pressure warning system Your Lexus is equipped with a tire pressure warning system that uses tire pressure sensors to detect low tire pressure before serious problems arise. (P. 331, 335) Before removing the tire from the wheel, remove the system’s tire inflation pressure sensor. Be careful not to damage the sensor when removing and installing the tires. Turning directional tires Tire direction marks The tires listed below are directional. The tire sidewalls are marked with arrows indicating the rolling direction of the tire. If mounted on the wrong side of the vehicle, directional tires will perform poorly. Tire size Front Rear 225/45R17 90W 245/45R17 95W 225/40R18 88Y 255/40R18 95Y Installing tire inflation pressure sensors When replacing tires or wheels, new tire pressure sensors must also be installed. Tire pressure sensors can be installed in any of the following three ways: ● Sensors can be removed from the old wheels and installed on the new wheels. 276 4-3. Do-it-yourself maintenance ● When replacing only the tire, the sensor already installed on the wheel does not need to be replaced. ● Replacing both a wheel and its sensor. When new tire pressure sensors are installed, new sensor ID codes must be registered in the ECU and tire inflation pressure sensor must be initialized. (P. 277, 278) Initializing the tire pressure warning system ■ The tire pressure warning system must be initialized in the following circumstances: ● When the standard tire pressure changes by replacing tires or wheels ● When tires are rotated. ● When tire pressure sensors are replaced. ● When driving with the tires inflated to a higher than standard tire pressure. ■ How to initialize the tire pressure warning system To initialize the system, use the satellite switch. (P. 214) STEP 1 STEP 2 STEP 3 Park the vehicle in safe place and turn off the engine. Adjust the tire pressure to the specified pressure (P. 378) Turn the engine switch to IG-ON mode. Make sure to adjust the tire pressure to the specified level. The tire inflation pressure warning system will operate based on this pressure level. 277 Maintenance and care When the tire pressure warning system is initialized, the current tire pressure is set as the pressure benchmark. 4 4-3. Do-it-yourself maintenance STEP 4 The tire pressure initialization setting display Continue to press the or switch until the initialization setting display appears. It may take several minutes to complete the setting. Wait for several minutes before turning the engine switch OFF if necessary. Recording tire pressure settings Press the ON/OFF button for more than 3 seconds. At this time, the tire inflation pressure warning indicator flashes 3 times and the message showing that the initial setting is complete is displayed on the multi-information display. Registering and selecting tire inflation pressure sensor ID codes The tire inflation pressure sensor is equipped with a unique ID code. To select tire inflation pressure sensor ID codes, use the satellite switch. (P. 214) ■ Registering ID codes Two separate sets of ID codes can be registered for each vehicle. This allows 2 separate sets of settings to be conveniently recorded for all season and winter tires. MAIN: The MAIN ID code is used for the factory installed tire pressure sensors. 2nd: The 2nd ID code is used for tire inflation pressure sensors associated with a secondary set of tires. Make sure to have all tire inflation pressure warning system ID codes registered by your Lexus dealer. ID codes must be reset when tires or wheels are replaced. 278 4-3. Do-it-yourself maintenance ■ Selecting ID codes When replacing tires, make sure to select the ID code set that matches the new tire set. If the incorrect ID code is selected, the tire pressure warning system will not operate properly. Tire pressure ID code settings display Press or repeatedly until the setting display appears. Switching ID codes Press the ON/OFF button to switch between MAIN and 2nd ID codes. ■ When to replace your vehicle’s tires Tires should be replaced if: 4 ● You have tire damage such as cuts, splits, cracks deep enough to expose the ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Lexus dealer. ■ Tire life Any tire over 6 years old must be checked by a qualified technician even if they have seldom or never been used or damage is not obvious. ■ If the tread wears down below 0.16 in. (4 mm) on snow tires The effectiveness of snow tires is lost. ■ Low profile tires (vehicles not equipped with 205/55R16 tires) Generally, low profile tires will wear more rapidly and tire grip performance will be reduced on snowy and/or icy roads when compared to standard tires. Be sure to use snow tires or tire chains* on snowy and/or icy roads and drive carefully at a speed appropriate for road and weather conditions. *: Tire chains cannot be mounted on 18-inch tires. 279 Maintenance and care fabric or bulges indicating internal damage 4-3. Do-it-yourself maintenance ■ Maximum load of tire Check that the maximum load of the replaced tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle of the rear axle, whichever is greater. As for the maximum load of the tire, see the load limit at maximum cold tire inflation pressure mentioned on the sidewall of the tire, and as for the Gross Axle Weight Ratings (GAWR), see the Certification Label. (P. 285, 387). ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads. For driving on snow-covered roads or icy roads, the use of snow tires is recommended. When installing snow tires, be sure to replace all four tires. 2 All season tires All season tires are designed to provide better traction in snow and to be adequate for driving in most winter conditions, as well as for use year round. All season tires, however, do not have adequate traction performance compared with snow tires in heavy or loose snow. Also, all season tires fall short in acceleration and handling performance compared with summer tires in highway driving. 3 Snow tires For driving on snow-covered roads or icy roads, we recommend using snow tires. If you need snow tires, select tires of the same size, construction and load capacity as the originally installed tires. Since your vehicle has radial tires as original equipment, make sure your snow tires also have radial construction. Do not install studded tires without first checking local regulations for possible restriction. Snow tires should be installed on all wheels. (P. 151) ■ Initializing the tire inflation pressure warning system Initialize the tires with the tire inflation pressure adjusted to the specified level. 280 4-3. Do-it-yourself maintenance ■ When the initialization of the tire inflation pressure warning system has failed Initialization can be completed in a few minutes. However, in the following cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Lexus dealer. ● When operating the satellite switch, the warning light does not flash and the set- ting message does not appear on the multi-information display. (The tires cannot be initialized while the vehicle is running.) ● After driving for approximately 20 minutes since the initialization has been completed, the warning light flashes. ■ Routine tire inflation pressure checks The tire inflation pressure warning system does not replace routine tire inflation pressure checks. Make sure to check tire inflation pressure as part of your routine of daily vehicle checks. 4 Maintenance and care 281 4-3. Do-it-yourself maintenance ■ Tire inflation pressure warning system certification For vehicles sold in the U.S.A. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For vehicles sold in Canada NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 282 4-3. Do-it-yourself maintenance CAUTION ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do so may cause damage to parts of the drive train, as well as dangerous handling characteristics, which may lead to fatal or injury accidents. ● Do not mix tires of different makes, models, tread patterns or tread wear. ● Do not use tire sizes other than those recommended by Lexus. ● Do not mix radial, bias-belted, or bias-ply tires. ● Do not mix summer, all season and winter tires. NOTICE ■ Repairing or replacing tires, wheels and sensors ● When removing the tires from the wheels, be careful not to damage the system’s tire inflation warning sensors. Contact your Lexus dealer for details regarding the removal and installation procedures. grommets. ■ Do not use puncture sealant sprays to repair flats Puncture sealant sprays may damage tire inflation pressure sensors. 283 Maintenance and care ● When replacing tires, make sure also to replace the tire inflation pressure sensor 4 4-3. Do-it-yourself maintenance NOTICE ■ Driving on rough roads Take particular care when driving on roads with loose surfaces or potholes. These conditions may cause losses in tire air pressure, reducing the cushioning ability of the tires. In addition driving on rough roads may cause damage to the tires themselves, as well as the vehicle’s wheels and body. ■ Low profile tires and wheels Wheels with profile tires like 17- and 18-inch tires may cause greater damage than usual to the tire wheel when receiving impact from the road surface. Therefore pay attention to the following: ● Be sure to use proper tire inflation pressure. If tires are under-inflated, they may be damaged more severely. ● Avoid hot holes, uneven pavement, curbs and other road hazards. Failure to do so can lead to severe tire and wheel damage. ■ If tire inflation pressures become low while driving Do not continue driving, or your tires and/or wheels may be ruined. 284 4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is displayed on the tire and loading information label. (P. 378) 4 Maintenance and care 285 4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 Remove the tire valve cap. Press the tip of the tire pressure gauge onto the tire valve. Read the pressure using the graduations of the gauge. If the tire inflation pressure is not within the recommended levels, adjust inflate the tire. If you add too much air, press the center of the valve to lower. After completing the tire inflation pressure measurement and adjustment, apply soapy water to the valve and check for leakage. Reinstall the tire valve cap. . ■ Tire inflation pressure check interval You should check tire pressure every two weeks, or at least once a month. Do not forget to check the spare. 286 4-3. Do-it-yourself maintenance ■ Effects of incorrect tire inflation pressure Driving with incorrect tire pressure may result in the following: ● Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Lexus dealer. ■ Instructions for checking tire pressure When checking tire inflation pressure, observe the following: ● Check only when the tires are cold. If your vehicle has been parked for at least 3 hours and has not been driven for more than 1 mile or 1.5 km, you will get an accurate cold tire inflation pressure reading. ● Always use a tire pressure gauge. The appearance of the tire can be misleading. In addition, tire inflation pressures that are even just a few pounds off can degrade ride and handling. 4 ● Do not bleed or reduce tire inflation pressure after driving. It is normal for the ● Never exceed the vehicle capacity weight. Passengers and luggage weight should be placed so that the vehicle is balanced. 287 Maintenance and care tire inflation pressure to be higher after driving. 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ● Poor handling ● Possibility of blowouts resulting from overheated tires ● Poor sealing of the tire bead ● Wheel deformation and/or tire separation ● A greater possibility of tire damage from road hazards NOTICE ■ When inspecting and adjusting tire pressure Be sure to reinstall the tire valve caps. Without the valve caps, dirt or moisture could get into the valve and cause air leakage, which could result in an accident. If the caps have been lost, replace them as soon as possible. 288 4-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause loss of handling control. ■ Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width, and offset. Replacement wheels are available at your Lexus dealer. Lexus does not recommend using: • Wheels of different sizes or types • Used wheels • Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Lexus wheel nuts and wrenches designed for use with your aluminum wheels. ● Be careful not to damage the aluminum wheels when using tire chains. ● Use only Lexus genuine balance weights or equivalent and a plastic or rubber hammer when balancing your wheels. ■ When replacing wheels The wheels of your Lexus are equipped with sensors that allow the tire pressure warning system sensors to provide advanced warning in the event of a loss in tire pressure. Whenever wheels are replaced, the tire inflation pressure sensors must be switched over from the old wheels. (P. 277) 289 Maintenance and care ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1000 miles (1600 km). 4 4-3. Do-it-yourself maintenance CAUTION ■ When replacing wheels ● Do not use wheels that are a different size from those recommended in the Owner’s Manual, as this may result in loss of handling control. ● Never use an inner tube in a leaking wheel which is designed for a tubeless tire. Doing so may result in an accident, causing serious injury or death. NOTICE ■ Replacing tire inflation pressure sensors ● Because tire repair or replacement may affect the tire pressure sensors, make sure to have tires serviced by your Lexus dealer or other qualified service shop. In addition, make sure to purchase your tire pressure sensors at your Lexus dealer. ● Ensure that only Genuine Lexus wheels are used on your vehicle. Tire pressure sensors may not work properly with non-genuine wheels. 290 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. STEP 1 Set the air conditioning system to recirculated mode. The air conditioning filter case cannot be removed with the system in the outside air mode. STEP 2 Turn the engine switch OFF. Open the glove box. Lift and remove the partition. STEP 4 Remove the filter cover. STEP 5 Remove the filter case. 4 Maintenance and care STEP 3 291 4-3. Do-it-yourself maintenance STEP 6 Remove the air conditioning filter from the filter case and replace it with a new one. The UP marks shown on the filter and the filter case should be pointing up. ■ Changing interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the "Owner's Manual Supplement/Scheduled Maintenance".) ■ If air flow from the vents decreases dramatically The filter may be clogged. Check the filter and replace if necessary. NOTICE ■ When using the air conditioning system Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to the system. 292 4-3. Do-it-yourself maintenance Electronic key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver ● Small Phillips-head screwdriver ● Lithium battery (CR1632) ■ Replacing the battery STEP 1 Take out the mechanical key. 4 Remove the cover. STEP 3 Remove the depleted battery. Maintenance and care STEP 2 Insert a new battery with the + terminal facing up. 293 4-3. Do-it-yourself maintenance ■ If the electronic key battery is discharged The following symptoms may occur. ● The smart access system with push-button start and wireless remote control will not function properly. ● The operational range is reduced. ■ Use a CR1632 lithium battery ● Batteries can be purchased at your Lexus dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by a Lexus dealer. ● Dispose of used batteries according to the local laws. CAUTION ■ Removed battery and other parts Keep away from children. These parts are small and if swallowed by a child they can cause choking. NOTICE ■ For normal operation after replacing the battery Observe the following precautions to prevent accidents. ● Always work with dry hands. Moisture may cause the battery to rust. ● Do not touch or move any other components inside the remote control. ● Do not bend either of the battery terminals. 294 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP 1 STEP 2 STEP 3 Turn the engine switch OFF. Remove the engine compartment cover. P. 263 Open the fuse box cover. Engine compartment (type A) Push the tabs in and lift the lid off. 4 Engine compartment (type B) 295 Maintenance and care Push the tabs in and lift the lid off. 4-3. Do-it-yourself maintenance Driver's side panel Remove the lid. instrument Passenger's side instrument panel Remove the lid. STEP 4 STEP 5 296 After a system failure, see “Fuse layout and amperage ratings” (P. 299) for details about which fuse to check. Remove the fuse with the pullout tool. 4-3. Do-it-yourself maintenance STEP 6 Check if the fuse has blown. Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type B Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. 4 Maintenance and care Type C Normal fuse Blown fuse Contact your Lexus dealer. Type D Normal fuse Blown fuse Contact your Lexus dealer. 297 4-3. Do-it-yourself maintenance Removing the front controller (engine compartment: type B) Lift the lid off while pushing the tabs on either side. 298 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment (type A) Fuse Ampere Circuit 1 ABS NO.3 25A 2 PWR HTR 25A 3 TURN-HAZ 15A Emergency flashers, turn signals 4 IG2 MAIN 20A IG2, IGN, GAUGE 5 RAD NO.2 30A Audio 6 D/C CUT 20A DOME, MPX-B 7 RAD NO.1 30A Audio VDIM 4 MPX-B 10A 9 DOME 10A Interior lights, meter 299 Maintenance and care 8 Headlights, front fog lights, parking lights, license plate lights, windshield washer, horn, power door lock system, power windows, power seats, electric tilt and telescopic steering column, meter, smart access system with pushbutton start, outside rear view mirrors, air conditioning system, security system 4-3. Do-it-yourself maintenance Fuse Ampere Circuit FR CTRL-B, ETCS, ALT-S, steering lock system, exhaust system 10 E/G-B 60 A 11 DIESEL GLW 80 A 12 ABS1 50 A VSC, VDIM 13 RH J/B-B 30A Power door lock system, smart access system with push-button start 14 MAIN 30A Headlight low beams 15 STARTER 30A Smart access system with push-button start 16 LH J/B-B 30A Power door lock system, SECURITY 17 P/I-B 60 A Multiport fuel injection system/ sequential multiport fuel injection system 18 EPS 80 A Power steering 19 ALT 150 A LH J/B-AM, E/G-AM, GLW PLG2, HEATER, FAN1, FAN2, DEFOG, ABS2, RH J/B-AM, GLW PLG1, LH J/B-B, RH J/B-B 20 GLW PLG1 50 A PTC heater 21 RH J/B-AM 80 A OBD, STOP SW, TI&TE, FR P/SEAT RH, RAD NO.3, ECU-IG RH, RH-IG, FR S/HTR RH, ACC, CIG, PWR OUTLET 22 ABS2 30A VSC 23 DEFOG 50 A Rear window defogger 24 FAN2 40 A Electric cooling fans 25 FAN1 40 A Electric cooling fans 26 HEATER 50 A Air conditioning system 300 4-3. Do-it-yourself maintenance Fuse Ampere 27 GLW PLG2 50 A PTC heater 28 E/G-AM 60 A Headlight cleaners, front fog lights, parking lights, air conditioning system 80 A S/ROOF, FR P/SEAT LH, TV NO.1, A/C, FUEL/OPEN, PSB, FR WIP, H-LP LVL, LH-IG, ECU-IG LH, PANEL, TAIL, MIR HTR, FR S/HTR LH 29 LH J/B-AM Circuit 4 Maintenance and care 301 4-3. Do-it-yourself maintenance ■ Engine compartment (type B) Fuse Ampere Circuit 1 FR CTRL-B 25A Headlight high beam, horn 2 A/F 15A Exhaust system 3 ETCS 10A Multiport fuel injection system/ sequential multiport fuel injection system 4 ALT-S 7.5 A Charging system 5 STR LOCK 25A Steering lock 6 H-LP CLN 30A Headlight cleaner 7 A/C COMP 7.5 A Air conditioning system 8 DEICER 25A 9 FR CTRL-AM 30A Front fog lights, parking lights, windshield washer 10 IG2 10A Ignition system 11 EFI NO.2 10A Fuel system, exhaust system 12 H-LP R LWR 15A Headlight low beam (right) 13 H-LP L LWR 15A Headlight low beam (left) 302 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 14 F/PMP 25A Fuel system 15 EFI 25A Multiport fuel injection system/ sequential multiport fuel injection system 16 INJ 20A Multiport fuel injection system/ sequential multiport fuel injection system 17 H-LP UPR 15A Headlight high beams 18 HORN 10A Horns 19 WASHER 20A Windshield washer 20 FR TAIL 10A Parking lights 21 FR FOG 15A Front fog lights 4 Maintenance and care 303 4-3. Do-it-yourself maintenance ■ Driver’s side instrument panel Fuse Ampere Circuit 1 FR P/SEAT LH 30A Power seat 2 A/C 7.5 A Air conditioning system 3 MIR HTR 15A Outside rear view mirror defoggers 4 TV NO.1 10A Display 5 FUEL OPEN 10A Fuel filler door opener 6 TV NO.2 7.5 A 7 PSB 30A Pre-collision seat belt 8 S/ROOF 25A Electric moon roof 9 TAIL 10A Tail lights, license plate lights, parking lights 10 PANEL 7.5 A Switch illumination, air conditioning system, display 11 RR FOG 7.5 A 12 ECU-IG LH 10A Cruise control, air conditioning system, power steering, rain sensor, antiglare inside rear view mirror, shift lock system, moon roof, tire inflation pressure warning system 13 FR S/HTR LH 15A Seat heaters and ventilators 304 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 14 RR DOOR LH 20A Power windows 15 FR DOOR LH 20A Power windows 16 SECURITY 7.5 A Smart access system with push-button start 17 H-LP LVL 7.5 A AFS 18 LH-IG 10A Charging system, headlight cleaner, rear window defogger, electric cooling fans, emergency flashers, turn signal lights, back-up lights, stop lights, mirror heaters, sun shade, seat belts, park assist system, cruise control, air conditioning system, PTC heater 19 FR WIP 30A Windshield wipers 4 Maintenance and care 305 4-3. Do-it-yourself maintenance ■ Passenger’s side instrument panel Fuse Ampere Circuit 1 FR P/SEAT RH 30A Power seat 2 DOOR DL 15A 3 OBD 7.5 A On-board diagnosis system 4 STOP SW 7.5 A Stop lights 5 TI & TE 20A Electric tilt and telescopic steering column 6 RAD NO.3 10A Audio 7 GAUGE 7.5 A Meter 8 IGN 10A SRS airbag system, Lexus link system, cruise control, steering lock system, fuel system 9 ACC 7.5 A Lexus link system, clock, air conditioning system, audio, display, outside rear view mirrors, smart access system with push-button start 10 CIG 15A Cigarette lighter 11 PWR OUTLET 15A Power outlet 12 RR DOOR RH 20A Power windows 306 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 13 FR DOOR RH 20A Power windows, outside rear view mirrors 14 AM2 15A Smart access system with push-button start 15 RH-IG 7.5 A Seat belts, park assist system, automatic transmission, seat heater and ventilator 16 FR S/HTR RH 15A Seat heaters and ventilators 10A Power seats, smart access system with push-button start, AWD system, outside rear view mirrors, VDIM, VSC, air conditioning system, pre-collision safety belt, electric tilt and telescopic steering, power windows, navigation system 17 ECU-IG RH ● If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P. 310) ● If the replaced fuse blows again, have the vehicle inspected by your Lexus dealer. ■ If there is an overload in the circuits The fuses are designed to blow before the entire wiring harness is damaged. 307 Maintenance and care ■ After a fuse is replaced 4 4-3. Do-it-yourself maintenance CAUTION ■ To prevent system breakdowns and vehicle fire ● Observe the following precautions. Failing to do so may cause damage, and possibly a fire or injury. ● Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. ● Always use a genuine Lexus fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire. ● Do not modify fuses or the fuse box. NOTICE ■ Before replacing fuses Have the cause of electrical overload determined and repaired by your Lexus dealer. 308 4-3. Do-it-yourself maintenance Headlight aim ■ Vertical movement adjusting bolts Adjustment bolt A Adjustment bolt B Remember the turning direction and the number of turns in mind. STEP 2 Turn bolt B the same number of turns and in the same direction as step 1 using a Phillips-head screwdriver. If the error is over the value specified above, take the vehicle to your Lexus dealer to adjust the headlight aim. 309 4 Maintenance and care ■ Before checking the headlight aim STEP 1 Make sure the vehicle has a full tank of gas and the area around the headlight is not deformed. STEP 2 Park the vehicle on level ground. STEP 3 Sit in the driver’s seat. STEP 4 Bounce the vehicle several times. ■ Adjusting the headlight aim Turn bolt A in either direction STEP 1 using a Phillips-head screwdriver. 4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. For more information about replacing other light bulbs, contact your Lexus dealer. ■ Prepare a replacement light bulb. Check the wattage of the light bulb being replaced. (P. 383) ■ Remove the engine compartment cover. P. 263 ■ Front bulb locations Parking light Headlight high beam ■ Rear bulb locations Back-up light 310 Rear turn signal light 4-3. Do-it-yourself maintenance Replacing light bulbs ■ Headlight high beams STEP 1 Release the lock and remove the cover. STEP 2 Turn the bulb base counterclockwise. 4 Unplug the connector while depressing the lock release. 311 Maintenance and care STEP 3 4-3. Do-it-yourself maintenance ■ Parking lights STEP 1 Release the lock and remove the cover. STEP 2 Turn the bulb base counterclockwise. STEP 3 Remove the light bulb. ■ Back-up light STEP 1 312 Open the trunk door and remove the trunk panel cover clips. 4-3. Do-it-yourself maintenance STEP 2 Partly remove the trunk panel cover and turn bulb bases counterclockwise. STEP 3 Remove the light bulb. 4 ■ Rear turn signal lights Open the trunk door and remove the cover. STEP 2 Turn the bulb base counterclockwise. 313 Maintenance and care STEP 1 4-3. Do-it-yourself maintenance STEP 3 Remove the light bulb. ■ Bulbs other than the above If any of the bulbs listed below has burnt out, have your Lexus dealer replace it. ● Headlight low beams (halogen bulbs) ● Headlight high and low beams (discharge bulbs) ● Front fog lights ● Front turn signal lights ● Front side marker lights ● Stop/tail lights ● Tail lights ● Rear side marker lights ● High mounted stoplight ● License plate lights 314 4-3. Do-it-yourself maintenance ■ When replacing the front left headlight and parking light bulbs Remove the securing bolt and move the washer fluid filler opening to allow easy access to the light bulbs. After replacing the bulbs, make sure to secure the washer fluid filler opening with the bolt. ■ Condensation build-up on the inside of the lens Contact your Lexus dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. ● Large drops of water are built up on the inside of the lens. ● Water has built up inside the headlight. ■ Discharge headlights 4 315 Maintenance and care If voltage to the discharge bulbs is insufficient, the bulbs may not come on, or may go out temporarily. The discharge bulbs will come on when normal power is restored. 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the headlights. Do not attempt to replace the bulb immediately after turn- ing off the headlights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. Hold the bulb by the plastic or metal portion. If the bulb is scratched or dropped it may blow out or crack. ● Fully install light bulbs and any parts used to secure them. Failing to do so may result in heat damage, fire, or water entering the headlight unit. This may damage the headlights or cause condensation to build up on the lens. ● Do not attempt to repair or disassemble light bulbs, connectors, electric circuits or component parts. Doing so may result in serious injury due to electric shock. ■ Discharge headlights ● Contact your Lexus dealer before replacing discharge headlights (including light bulbs). ● Do not touch the high voltage socket while the headlights are turned on. 20000 V is momentarily generated and may cause severe injury by electric shock. ■ To prevent damage or fire Make sure bulbs are fully seated and locked. 316 When trouble arises 5 5-1. Essential information ............. 318 If your vehicle overheats ........ 365 If your vehicle needs to be towed............................................ 318 If the vehicle becomes stuck ............................................ 367 If you think something is wrong .......................................... 325 Fuel pump shut off system ..... 326 Event data recorder ................. 327 5-2. Steps to take in an emergency ............................ 329 If a warning light turns on or a warning buzzer sounds......................................... 329 If a warning message is displayed.................................... 334 If you have a flat tire................. 348 If the engine will not start ....... 356 If the shift lever cannot be shifted from P..................... 357 If you lose your keys ................ 358 When the electronic key battery is discharged ............ 359 If the vehicle battery is discharged ................................ 362 317 5-1. Essential information If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Lexus dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/provincial and local laws. If towing from the rear, the vehicle’s front wheels and axles must be in good condition. (P. 322) If they are damaged, use a towing dolly or flat bed truck. Before towing The following may indicate a problem with your transmission. Contact your Lexus dealer before towing. ● The engine is running, but the vehicle will not move. ● The vehicle makes an abnormal sound. Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet(s). This should only attempted on hard, surfaced roads for short distances at low speeds. A driver must be in the vehicle to steer and operate the brakes. The vehicle’s wheels, drive train, axles, steering and brakes must be in good condition. Towing eyelets 318 5-1. Essential information ■ Emergency towing procedure STEP 1 Release the parking brake. STEP 2 Put the transmission in N. STEP 3 Put the engine switch in the ACC mode (engine off) or the IG-ON mode (engine running). CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelets and the cables or chains. ● If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult. NOTICE ■ To prevent causing serious damage to the transmission (for vehicles with an automatic transmission) 5 Never tow this vehicle from the front with the rear wheels on the ground. This may cause serious damage to the transmission. When trouble arises ■ When towing a vehicle without using a towing dolly (for vehicles with a manual transmission) The engine switch must not be OFF. 319 5-1. Essential information Installing towing eyelets STEP 1 Remove the eyelet cover using a flat head screwdriver. To protect the bodywork, place a rag between the screwdriver and the vehicle body, as shown in the illustration. STEP 2 Insert the towing eyelet into the hole and tighten partially by hand. STEP 3 Tighten down the towing eyelet securely using a wheel nut wrench. ■ Location of the emergency towing eyelet P. 348 320 5-1. Essential information CAUTION ■ Installing towing eyelets to the vehicle Make sure that towing eyelets are installed securely. If not securely installed, towing eyelets may come loose during towing. This may lead to accidents that cause serious injury or even death. Towing with a sling-type truck NOTICE ■ To prevent body damage 5 Do not tow with a sling type truck, either from the front or rear. When trouble arises 321 5-1. Essential information Towing with a wheel lift-type truck From front Vehicles with an automatic transmission: Use a towing dolly under the rear wheels. Vehicles with a manual transmissions: We recommend to use a towing dolly under the rear wheels. When not using a towing dolly, turn the engine switch to ACC mode and shift the shift lever to N. NOTICE ■ To prevent causing serious damage to the transmission (for vehicles with an automatic transmission) Never tow this vehicle from the front with the rear wheels on the ground. ■ When towing a vehicle without using a towing dolly (for vehicles with a manual transmission) The engine switch must not be OFF. 322 5-1. Essential information Switch to ACC mode so that the steering wheel is unlocked. From the rear (2WD models) Use a towing dolly under the front wheel. From the rear (AWD models) NOTICE 5 ● Do not tow the vehicle with the engine switch OFF. The steering lock mechanism is not strong enough to hold the front wheel straight. ● When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed. 323 When trouble arises ■ To prevent damaging the vehicle 5-1. Essential information Using a flat bed truck If your Lexus is transported by a flat bed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45. Do not overly tighten the tie downs or the vehicle may be damaged. 324 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Lexus dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.) ● Flat-looking tires or uneven tire wear ● Engine coolant temperature gauge needle continually points higher than normal ■ Audible symptoms ● Changes in exhaust sound ● Excessive tire squeal when cornering ● Strange noises related to the suspension system ● Pinging or other noises related to the engine ■ Operational symptoms ● Engine missing, stumbling or running rough ● Appreciable loss of power 5 ● Vehicle pulls heavily to one side when braking ● Loss of brake effectiveness, spongy feeling, pedal almost touches the floor 325 When trouble arises ● Vehicle pulls heavily to one side when driving on a level road 5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an airbag inflates upon collision, the fuel pump shut off system stops supplying fuel to the engine. Follow the procedure below to restart the engine after the system is activated. STEP 1 Switch to ACC mode or OFF. STEP 2 Restart the engine. NOTICE ■ Before starting the engine Inspect the ground under the vehicle. If you find that fuel has leaked on to the ground, the fuel system has been damaged and it is in need of repair. Do not restart the engine. 326 5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event. In a crash or a near car crash event The EDR may record some or all of the following information. ● Engine speed ● Whether the brake pedal was applied or not ● Vehicle speed ● To what extent the accelerator pedal was depressed ● Position of the transmission shift lever ● Whether the driver and front passenger wore seat belts or not ● Driver's seat position 5 ● SRS airbag deployment data If your vehicles is equipped with a vehicle stability control (VSC) system Your Lexus’ Electronic Control Unit (ECU) may contain another EDR. There are a variety of driving situations which include activating the VSC under which the VSC EDR will record certain information. The VSC EDR may record some or all of the following information: ● Behavior of the vehicle ● Steering wheel angle ● Vehicle speed 327 When trouble arises ● SRS airbag system diagnostic data 5-1. Essential information ● To what extent the accelerator pedal was depressed ● To what extent the brake pedal was applied ● To what extent the ECU controlled the condition of the 4 wheels ● Vehicle stability control system diagnostic data Disclosure of the data Lexus will not disclose the data recorded in an EDR to a third party except when: ● An agreement from the vehicle's owner (or the leasing company for a leased vehicle) is obtained ● Officially requested by the police or other authorities ● Used as a defense for Lexus in a law suit ● Ordered by a court law However, if necessary Lexus will: ● Use the data for research on Lexus vehicle safety performance ● Disclose the data to a third party for research purposes without disclosing details of the vehicle owner, and only when it is deemed necessary ● Disclose summarized data cleared of vehicle identification information to a non-Lexus organization for research purposes 328 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the system. Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake system. Immediately stop the vehicle in a safe place and contact your Lexus dealer. Warning light Warning light/Details Brake system warning light (warning buzzer)* (U.S.A.) • Low brake fluid • Malfunction in the brake booster system This light also comes on when the parking brake is not (Canada) released. If the light turns off after the parking brake is fully released the system is operating normally. *: Parking brake engaged warning buzzer: 5 P. 339 When trouble arises 329 5-2. Steps to take in an emergency Stop the vehicle immediately. The following warnings indicate the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Lexus dealer. Warning light Warning light/Details Charging system warning light Indicates a malfunction in the vehicle’s charging system. Have the vehicle inspected by your Lexus dealer immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Lexus dealer immediately. Warning light Warning light/Details Malfunction indicator lamp (U.S.A.) Indicates a malfunction in: • The electronic engine control system; (Canada) • The electronic throttle control system; or • The electronic automatic transmission control system. SRS warning light Indicates a malfunction in: • The SRS airbag system; or • The seat belt pretensioner system. 330 5-2. Steps to take in an emergency Warning light Warning light/Details ABS warning light Indicates a malfunction in: • The ABS; or (Canada) • The brake assist system. (U.S.A.) Electric power steering system warning light • Indicates a malfunction in the EPS (Electric Power Steering) system. Pre-collision system warning light (if equipped) • Indicates a malfunction in the pre-collision system. Have the malfunction repaired immediately. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Check that all doors and the trunk are closed. Low fuel level warning light Remaining fuel Refuel the vehicle. (Approximately 2.9 gal. [11 L, 2.4 Imp.gal.] or less) Driver’s seat belt reminder light (warning buzzer)*2 Warns the driver to fasten his/her seat belt. 5 When trouble arises Open door warning light (warning buzzer)*1 Indicates that a door or a trunk is not fully closed. Correction procedure Fasten the seat belt. 331 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Front passenger’s seat belt reminder light Fasten the seat belt. (warning buzzer)*2 Warns the front passenger to fasten his/her seat belt. Low tire pressure warning light Indicates low tire pressure. Adjust the tire pressure. A malfunction in the tire pressure warning system. P. 335 Master warning light A buzzer sounds and the warning light comes on and flashes to indicate that the master warning system has detected a malfunction. P. 334 *1:Open door warning buzzer: P. 339 *2:Driver's and front passenger’s seat belt reminders: The driver’s and front passenger’s seat belts reminder sounds to alert the driver and front passenger that his or her sear belt is not fastened. The buzzer sounds intermittently for 10 seconds after the vehicle has reached a speed of at least 12 mph (20 km/h). Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 20 more seconds. 332 5-2. Steps to take in an emergency ■ If the electronic engine control system warning light comes on while driving First check the following: ● Is your vehicle low on gas? If it is, refuel the vehicle immediately. ● Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Lexus dealer as soon as possible. ■ Front passenger detection sensor and passenger seat belt reminder ● If luggage is placed on the front passenger seat, the front passenger detection sensor may cause the warning light to flash, even if a passenger is not sitting in the seat. ● If a cushion is placed on the seat, the sensor may not detect a passenger, and the warning light may not operate properly. 5 When trouble arises 333 5-2. Steps to take in an emergency If a warning message is displayed If a warning is shown on the multi-information display, stay calm and perform the following actions: Master warning light The master warning light also comes on or flashes in order to indicate that a message is currently being displayed on the multi-information display. Multi-information display If any of the warning light turns on again after performing the following actions, contact your Lexus dealer. Stop the vehicle immediately. A buzzer sounds and a warning message is shown on the multi-information display. The following warnings indicate the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Lexus dealer. Warning message (Flashing) 334 Details Indicates an abnormal engine oil pressure. The warning light may turn on if the engine oil pressure is too low. 5-2. Steps to take in an emergency Have the vehicle inspected by your Lexus dealer immediately. A buzzer sounds and a warning message is shown on the multi-information display. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Lexus dealer immediately. Warning message Details Indicates a malfunction in the AWD system. (If equipped) Indicates a malfunction in the tire pressure warning (Flashing and then system. (P. 276) continuously on) (Flashing) 335 When trouble arises Indicates a malfunction in the steering lock system. 5 5-2. Steps to take in an emergency Warning message Details Indicates a malfunction in the pre-collision system. (If equipped) Indicates Lexus parking assist-sensor malfunction. The malfunctioning assist-sensor is shown flashing on the display. (If equipped) (If equipped) (Flashing) 336 Indicates a malfunction in the radar cruise control system. Stop the vehicle in a safe place. Switch the engine switch to OFF and then to IG-ON mode again to reset the cruise control system. 5-2. Steps to take in an emergency ■ If the tire pressure warning system is inoperative The tire pressure warning system may become inoperative in the following circumstances: ● The vehicle’s wheels have not been equipped with tire pressure sensors. ● The sensor batteries are dead. ● If wireless frequencies the same as those used by the sensors are being used by other facilities or equipment in the vicinity of the vehicle. ● If snow or ice has collected on or around the wheel or wheelhouse. ● If non-genuine wheels are used on the vehicle. ● When driving with tire chains. ● If wireless devices or other equipment that operate on similar frequencies to those used by the sensors are being used ● If the select switch is used to select the wrong set of sensors (wheels) ● If the tire pressure was not set to the specified level when the system was initial- ized NOTICE ■ Precaution when installing a different tire 5 337 When trouble arises When a tire of a different specification or maker is installed, the tire pressure warning system may not operate properly. 5-2. Steps to take in an emergency Have the vehicle inspected by your Lexus dealer immediately. Failing to investigate the cause of the following warning may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Lexus dealer immediately. Warning message Details Indicates a malfunction in the TRAC, VSC, ABS, BA or hill-start assist control systems. 338 5-2. Steps to take in an emergency Have the malfunction repaired immediately. A buzzer sounds and a warning message is shown on the multi-information display. After taking the specified steps to correct the suspected problem, check that the warning message turns off. Warning message Details Correction procedure Indicates that one or more of the doors is not fully closed. The system also indicates which doors are not fully closed. flashes and a Make sure that all of the doors are closed. buzzer sounds to indicate that one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). 5 When trouble arises Indicates that the hood is not fully closed. flashes and a buzzer sounds to indiClose the hood. cate that hood is not fully closed (with the vehicle having reached a speed of 3mph [5km/h]). 339 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the trunk is not fully closed. flashes and a buzzer sounds to indiClose the trunk. cate that trunk is not fully closed (with the vehicle having reached a speed of 3mph [5km/h]). (Flashing) Indicates that the moon roof is not fully closed (with the engine switch OFF and the driver’s door opened). (Flashing) Indicates that the parking brake is still engaged Release the parking (with the vehicle having brake. reached a speed of more than 3 mph [5 km/h]). Close the moon roof. Indicates that the washer Add washer fluid. fluid level is low. 340 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that engine oil level is low. Check the level of engine oil, and add if necessary. Indicates that the engine oil is scheduled to be changed. (U.S.A. only) Comes on approximately 4500 miles (7200 km) Check and the engine oil, after the engine oil is and change if necessary. changed. (The indicator will not work properly unless the oil maintenance data has been reset). Indicates that the engine oil should be changed. Comes on approximately 5000 miles (8000 km) Check and change the engine oil. after the engine oil is changed (and the oil maintenance data has been reset). When trouble arises (U.S.A. only) 5 341 5-2. Steps to take in an emergency Warning message (Flashing) Details Indicates low tire pressure. Check the tire pressure, and adjust to the appropriate level. Indicates that the precollision system is not currently functional. Clean the grille and the sensor. This message appears when the pre-collision system is hot. In this case, wait until the system cools down. Indicates that Lexus parking assist-sensor is dirty or covered with ice. Clean the sensor. Indicates that the radar cruise control sensor is dirty or covered with ice. Clean the sensor. (If equipped) (If equipped) (If equipped) (Flashing) 342 Correction procedure 5-2. Steps to take in an emergency Warning message (Flashing and then continuously on) (If equipped) (Flashing) (Flashing) (If equipped) Details Correction procedure Indicates that the radar cruise control system is unable to judge vehicleto-vehicle distance. • Switch the driving mode to either the normal or PWR mode. • If the windshield wipers are on, turn them off or set them to either the intermittent or the slow mode. Indicates that your vehicle is nearing the vehicle ahead (in radar cruise mode). Slow the vehicle by applying the brakes. 5 ■ Changing the engine oil (U.S.A. only) Make sure to reset the oil change system. (P. 264) In the following cases, the warning light may not be displayed even if vehicle-tovehicle distance closes. ● When your vehicle and the vehicle ahead are traveling at the same speed or the vehicle ahead is traveling more quickly than your vehicle ● When the vehicle ahead is traveling at a very low speed ● Immediately after cruise control speed is set ● At the instant the accelerator pedal is depressed 343 When trouble arises ■ Warning light display in radar cruise mode 5-2. Steps to take in an emergency CAUTION ■ Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label). (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label [tire and load information label], you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS-tire pressure warning system) that illuminates a low tire pressure telltale (low tire pressure warning light) when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale (low tire pressure warning light) illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS (tire pressure warning system) is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (low tire pressure warning light). 344 5-2. Steps to take in an emergency Have the malfunction repaired immediately. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Interior Exterior buzzer buzzer Once Warning message (Comes on for 8 seconds.) (Flashing) Once 3 times (Flashing) Details Correction procedure Indicates that the electronic key is Confirm the locanot present when tion of the elecattempting to start tronic key. the engine. 345 5 When trouble arises Indicates that a door other than the driver’s door has been opened Confirm the locaor closed with the tion of the elecengine switch tronic key. OFF and the electronic key outside of the detection area. 5-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once 3 times Warning message (For vehicles with an automatic transmission) (Flashing) Once Continuous (Displayed alternately) (For vehicles with an automatic transmission) (Flashing) Once Correction procedure Indicates that the driver’s door has been opened or closed with the shift lever in P, the engine switch in any mode other than OFF and the electronic key outside of the detection area. Turn the engine switch OFF or confirm the location of the electronic key. Indicates that the driver’s door has been opened or closed (with the • Shift the shift shift lever out of in lever to P. P, the engine • Confirm the switch in any location of the mode other than electronic key. OFF and the electronic key outside of the detection area). Indicates that the key battery is low. (Flashing) 346 Details Replace the battery. (P. 293) 5-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once Warning message (For vehicles with an automatic transmission) Once (For vehicles with a manual transmission) (Flashing) Correction procedure Indicates that a door has been opened or closed and the engine switch has been switched twice to ACC mode from OFF. Press the engine switch while applying the brakes. Indicates that a door has been opened or closed and the engine switch has been switched twice to ACC mode from OFF. Press the engine switch while depressing the clutch pedal. Indicates that the steering lock has not released within 3 seconds of pressing the engine switch. Press the engine switch again while turning the steering wheel with the brake pedal depressed. 347 5 When trouble arises Once Details 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (automatic) or R (manual). ● Stop the engine. ● Turn on the emergency flashers. ■ Location of the spare tire, jack and tools Jack handle Jack Tool bag (including towing eyelet) 348 Spare tire Tighten Loosen 5-2. Steps to take in an emergency Taking out the spare tire STEP 1 Lift up the hook of the panel on the trunk floor. STEP 2 Secure the panel using the hook provided. STEP 3 Loosen the center fastener that secures the spare tire. 5 When trouble arises 349 5-2. Steps to take in an emergency Replacing a flat tire STEP 1 Chock the tires. Flat tire Left-hand side Front Righthand side Left-hand side Rear Righthand side Wheel chock positions Behind the rear righthand side tire Behind the rear lefthand side tire In front of the front righthand side tire In front of the front lefthand side tire STEP 2 Slightly loosen the wheel nuts (one turn). STEP 3 Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. 350 5-2. Steps to take in an emergency STEP 4 Raise the vehicle until the tire is slightly raised off the ground. STEP 5 Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. Installing the spare tire STEP 1 Remove any dirt or foreign matter from the wheel contact surface. 351 When trouble arises If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle. 5 5-2. Steps to take in an emergency STEP 2 Tapered portion Disc wheel sheet Install the spare tire and loosely tighten each nut by hand to approximately the same amount. Tighten the wheel nuts until the tapered portion comes into loose contact with the disc wheel sheet. STEP 3 Lower the vehicle. STEP 4 Firmly tighten each nut two or three times in the order shown in the illustration. Tightening torque: 10.5 kgf•m (103 N•m, 76 ft•lbf) STEP 5 352 Stow the flat tire, tire jack and all tools. 5-2. Steps to take in an emergency ■ The compact spare tire ● The compact spare tire is identified by the label TEMPORARY USE ONLY on the tire sidewall. Use the compact spare tire temporarily only in an emergency. ● Make sure to check the tire pressure of the compact spare tire. (P. 378) ■ If you have a flat rear tire on a road covered with snow or ice Install the compact spare tire on the front of the vehicle. Perform the following steps and fit tire chains to the rear tires. STEP 1 Replace a front tire with the compact spare tire. STEP 2 Replace the flat rear tire with the tire removed from the front of the vehi- cle. STEP 3 Fit tire chains to the rear tires. ■ After completing the tire change The tire pressure warning system must be reset. (P. 277) 5 When trouble arises 353 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains. ● Only use the tire jack that comes with this vehicle for replacing a flat tire. Do not use it on other vehicles, and do not use other tire jacks for replacing tires on this vehicle. ● Always check that the tire jack is securely set to the jack point. ● Do not put any part of your body under the vehicle supported by a jack. ● Do not start or run the engine while your vehicle is supported by the jack. ● Do not raise the vehicle while someone is in it. ● When raising the vehicle, do not put an object on or under the jack. ● Do not raise the vehicle to a height greater than that required to replace the tire. ● Use a jack stand if it is necessary to get under the vehicle. Take particular care when lowering the vehicle to ensure that no one working on or near the vehicle may be injured. ■ Replacing a flat tire Observe the following precautions to reduce the risk of injury. ● Never use oil or grease on the wheel bolts or wheel nuts. The oil or grease can cause the wheel nuts to loosen, causing a serious accident. Remove any oil or grease on the wheel bolts or wheel nuts. ● Have the wheel nuts tightened with a torque wrench to 10.5 kgf•m (103 N•m, 76 ft•lbf) as soon as possible after changing wheels. Failure to follow these precautions could cause the nuts to loosen and the wheels may fall off, which could lead to an accident causing death or serious injury. 354 5-2. Steps to take in an emergency CAUTION ■ When using the spare tire ● Remember that your spare tire is specifically designed for use with your vehicle. Do not use your spare tire on another vehicle. ● Do not use two spare tires simultaneously. ● Replace the spare tire with a standard tire as soon as possible. ● Avoid sudden acceleration, deceleration and braking, as well as sharp cornering. ■ Speed limit when using the compact spare tire Do not drive at speeds in excess of 50 mph (80 km/h) when a compact spare tire is installed on the vehicle. The compact spare tire is not designed for driving at high speeds. Failing to observe this precaution may lead to an accident. NOTICE ■ Do not drive the vehicle with a flat tire. Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair. ■ Be careful when driving over bumps with the compact spare tire installed on the 5 vehicle. ■ Driving with tire chains and the compact spare tire Do not fit tire chains to the compact spare tire. Tire chains may damage the vehicle body and adversely affect driving performance. 355 When trouble arises The vehicle becomes lower when driving with the compact spare tire compared to when driving with standard tires. Be careful when driving over uneven road surfaces. 5-2. Steps to take in an emergency If the engine will not start If the engine will not start, even though correct starting procedures are being followed (P. 89), consider each of the following points. ■ The engine will not start even when the starter motor operates normally. One of the following may be the cause of the problem. ● There may not be sufficient fuel in the vehicle’s tank. Add fuel to the vehicle. ● The engine may be flooded. Try to restart the engine once more following correct starting procedures (P. 89). ● There may be a malfunction in the engine immobilizer system. (P. 50) ■ The starter motor turns over slowly, the interior lights and headlights are dim, or the horn does not sound or sounds at a low volume. One of the following may be the cause of the problem. ● The battery may be discharged. (P. 362) ● The battery terminal connections may be loose or corroded. ■ The starter motor does not turn over, the interior lights and headlights do not turn on, or the horn does not sound. One of the following may be the cause of the problem. ● One or both of the battery terminals may be disconnected. ● The battery may be discharged. (P. 362) ● There may be a malfunction in the steering lock system. Contact your Lexus dealer if the problem cannot be repaired, or if repair procedures are unknown. 356 5-2. Steps to take in an emergency If the shift lever cannot be shifted from P If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Lexus dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted. STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 Set the parking brake. Turn the engine switch to the ACC mode. Depress the brake pedal. Pry the cover up with a flathead screwdriver or equivalent. Press the shift lock override button. 357 When trouble arises The shift lever can be shifted while the button is pressed. 5 5-2. Steps to take in an emergency If you lose your keys New genuine Lexus keys can be made by your Lexus dealer using one of the other keys or the key number stamped on your key number plate. 358 5-2. Steps to take in an emergency When the electronic key battery is discharged If the electronic key battery is discharged, the doors and trunk can be opened by the mechanical key. The engine can be still started by following the procedure. Locking and unlocking the doors, unlocking the trunk and key linked functions Doors Remove the cover on the driver’s door handle using the mechanical key in order to perform the following operations. Locks all doors Closes the windows/moon roof (turn and hold) Unlocks the door Turning the key rearward unlocks the driver's door. Turning the key once again unlocks the other doors. Trunk Turn the mechanical key clockwise to open. 359 When trouble arises Opens the windows/moon roof (turn and hold) Return the cover to the original position after use. 5 5-2. Steps to take in an emergency Starting the engine STEP 1 STEP 2 For vehicles with an automatic transmission: Put the shift lever in P and apply the brakes. For vehicles with a manual transmission: Depress the clutch pedal. Hold the electronic key close to the engine switch (within 0.4 in. [10 mm]). Make sure that the button side of the key is facing away from the engine switch. An alarm will sound to indicate that the start function cannot detect the key with the depleted battery if any of the doors will be opened and closed while this operation. For vehicles with an automatic transmission: Press the engine switch within 5 seconds [after the buzzer sounds], keeping the brake pedal depressed. For vehicles with a manual transmission: Press the engine switch within 5 seconds [after the buzzer sounds], keeping the clutch pedal depressed. In the event that the engine still cannot be started, contact your Lexus dealer. STEP 3 360 5-2. Steps to take in an emergency ■ Replacing the key battery As this procedure is the temporary measure, it is recommended that the electronic battery be replaced immediately. (P. 293) 5 When trouble arises 361 5-2. Steps to take in an emergency If the vehicle battery is discharged The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can call your Lexus dealer, Roadside Assistance or Lexus Customer Service Assistance. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your Lexus following the steps below. STEP 1 Remove the engine compartment covers. (P. 263) STEP 2 Connecting the jumper cables. If required, remove all vent plugs from the booster battery. Lay a cloth over the open vents on the booster battery. (This helps reduce the explosion hazard, personal injuries and burns.) Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicle as shown in the illustration. STEP 3 Start the engine of the second vehicle. Increase the engine speed slightly and maintain at that level for approximately 5 minutes to recharge the battery of your vehicle. STEP 4 Open and close any of the doors with the engine switch OFF. 362 5-2. Steps to take in an emergency Maintain the engine speed on the second vehicle and turn the ignition switch to the IG-ON mode, then start the vehicle’s engine. STEP 6 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were connected. Once the engine starts, have the vehicle checked at your Lexus dealer as soon as possible. STEP 5 ■ Avoiding a discharged battery ● Turn off the headlights and the audio system while the engine is turned off. ● Turn off any unnecessary electrical components when the vehicle is running at a low speed for an extended period, such as in heavy traffic, etc. ■ When the battery is removed or discharged The power windows and tire pressure warning system must be initialized. (P. 41) CAUTION 5 ■ Avoiding battery fires or explosions ● Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended terminal. ● Do not allow the jumper cables to come into contact with the “+” and “-” termi- nals. ● Do not allow open flame or use matches, cigarette lighters or smoke near the battery. 363 When trouble arises Observe the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the battery. 5-2. Steps to take in an emergency CAUTION ■ Battery precautions The battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead compounds. Observe the following precautions when handling the battery. ● When working with the battery, always wear safety glasses and take care not to allow any battery fluids (acid) to come into contact with skin, clothing or the vehicle body. ● Do not lean over the battery ● In the event that battery fluid comes into contact with the skin or eyes, immedi- ately wash the affected area with water and seek medical attention. Place a wet sponge or cloth over the affected area until medical attention can be received. ● Always wash your hands after handling the battery support, terminals, and other battery-related parts. ● Do not allow children near the battery. NOTICE ■ To prevent damaging the vehicle Do not pull- or push-start the vehicle, because the three-way catalytic converter may overheat and become a fire hazard. ■ When handling jumper cables Be careful that the jumper cables do not become tangled in the cooling fan or any of the belts when connecting or disconnecting them. 364 5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 365 5 When trouble arises Stop the vehicle in a safe place and turn off the automatic air conditioning system. Check to see if steam is coming out from under the hood. If you see steam: Stop the engine and carefully lift the hood. If you do not see steam: Leave the engine running and carefully lift the hood. Remove the engine compartment cover. (P. 263) Check to see if the cooling fan is operating. If the fan is operating: Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fan is not operating: Stop the engine immediately and call your local Lexus dealer. After the engine has cooled down sufficiently, check the engine coolant level and inspect the radiator core (radiator) for any leaks. 5-2. Steps to take in an emergency STEP 6 Add engine coolant if required. Water can be used in an emergency measure if engine coolant is unavailable. (P. 374) Have the vehicle checked at your nearest Lexus dealer as soon as possible. ■ Overheating If you observe the following, your vehicle may be overheating. ● The engine coolant temperature gauge enters the red zone or a loss of power is experienced. ● Steam is coming from under the hood. CAUTION ■ To prevent an accident or injury when inspecting under the hood of your vehicle ● Keep hands and clothing away from the fan and other belts while the engine is running. ● Do not loosen the radiator cap while the engine and radiator are hot. Serious injury, such as burns, may result from hot coolant and steam released under pressure. NOTICE ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine. 366 5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. ● Stop the engine. Set the parking brake and put the selector lever in P (vehicles with an automatic transmission) or N (vehicles with a manual transmission). ● Remove the mud, snow, or sand from around the stuck tire. ● Place wood, stones or some other material to help provide traction under the tires. ● Restart the engine. ● For 2WD vehicles only: Turn the traction control OFF. ( P. 141) ● Carefully apply the accelerator to free the vehicle. CAUTION ■ When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the surrounding area is clear, to avoid striking other vehicles, objects or persons. The vehicle may also lunge forward or lunge back suddenly as it becomes free. Use extreme caution. With automatic transmission vehicles, be careful not to shift the shift lever with the accelerator pedal depressed. This may lead to unexpected rapid acceleration of the vehicle that may cause an accident and result in death or serious injury. NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle may require towing to be freed. 367 When trouble arises ■ When shifting the shift lever 5 5-2. Steps to take in an emergency 368 Vehicle specification 6 6-1. Specifications.......................... 370 Maintenance data..................... 370 Fuel information........................ 384 Tire information .......................... 387 6-2. Customization ........................ 395 Customizable features............ 395 6-3. Initialization ............................. 399 Items to initialize ........................ 399 369 6-1. Specifications Maintenance data Dimensions and weight Overall length 180.1 in. (4575 mm) Overall width 70.9 in. (1800 mm) Overall height *1 2WD models 56.1 in. (1425 mm) AWD models 56.7 in. (1440 mm) Wheelbase Tread Vehicle capacity weight (Occupants + luggage) 107.4 in. (2730 mm) Front 60.4 in. (1535 mm) Rear 60.0 in. (1525 mm)*2 60.4 in. (1535 mm)*3 825 lb. (374 kg) *1: Unladen vehicle *2: Vehicle with 255/40R18 tires *3: Vehicle with tires other than the above 370 6-1. Specifications Vehicle identification The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Lexus. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel and in the engine compartment. This number is also on the Certification Label. 6 Vehicle specifications 371 6-1. Specifications Engine IS250 IS350 Model 4GR-FSE 2GR-FSE Type 6-cylinder V type, 4-cycle, gasoline 6-cylinder V type, 4-cycle, gasoline Bore and stroke 3.27 3.03 in. (83.0 77.0 mm) 3.70 3.27 in. (94.0 83.0 mm) Displacement 152.5 cu.in. (2500 cm3) 210.9 cu.in. (3456 cm3) Drive belt tension Automatic adjustment Fuel Fuel type Unleaded gasoline only Octane rating 91 (Research octane number 96) or higher Fuel tank capacity 17.2 gal. (65 L, 14.3 lmp.gal) 372 6-1. Specifications Lubrication system IS250 IS350 Oil capacity (drain and refill) with filter 2WD models AWD models 6.6 qt. (6.3 L, 5.5 lmp.qt.) 6.6 qt. (6.3 L, 5.5 lmp.qt.) 6.8 qt. (6.4 L, 5.7 lmp.qt.) without filter 2WD models AWD models 6.2 qt. (5.9 L, 5.2 lmp.qt.) 6.2 qt. (5.9 L, 5.2 lmp.qt.) 6.3 qt. (6.0 L, 5.3 lmp.qt.) Oil grade ILSAC multi-grade engine oil Use Lexus approved "Toyota Genuine Motor Oil" or equivalent to satisfy the above grade and viscosity. Recommended oil viscosity Temperature range anticipated before next oil change 6 *:5W-30 is an oil that provides optimal levels of fuel efficiency. ● 5W oils are for use in areas where the ambient temperature is -3F (-25C) or above. "10W" oils are for areas where the ambient temperature is -4F (-20C) or above. Oils with smaller figures are better for engine starting in cold weather and fuel efficiency. ● XX-30 indicates oil viscosity. Oils with higher numbers have better stability at higher temperatures and are good for high-speed driving. 373 Vehicle specifications Oil viscosity 6-1. Specifications Cooling system Capacity 9.6 qt. (9.1 L, 8.0 lmp.qt.) Coolant type Use either of the following. • “Toyota Super Long Life Coolant" • Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life organic acid technology Do not use plain water alone. Ignition system Spark plug Make DENSO Gap FK20HBR11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine. 374 6-1. Specifications Electrical system Battery Open voltage at 68F (20C): 12.6 12.8 Fully charged 12.2 12.4 Half charged 11.8 12.0 Discharged (Voltage checked 20 minutes after the key is removed with all the lights turned off) Charging rates 5A max. Differential Oil capacity 0.74 qt. (0.70 L, 0.61 lmp.qt.) Rear IS350: 1.42 qt. (1.35 L, 1.19 lmp.qt.) IS250 (2WD models): 1.20 qt. (1.15 L, 1.01 lmp.qt.) IS250 (AWD models): 1.10 qt. (1.05 L, 0.92 lmp.qt.) IS250 (2WD) with limited slip differential and IS250 (AWD) Hypoid gear oil API GL-5 Above 0F (-18C): SAE90 Below 0F (-18C): SAE80W or SAE80W-90 Others Toyota Genuine Differential Gear Oil LT 75W-85 GL-5, Toyota Genuine Differential Synthetic Gear Oil or equivalent 375 6 Vehicle specifications Oil type and viscosity Front 6-1. Specifications Automatic Transmission IS350 Fluid capacity 1.8 qt. Drain and refill (1.7 L, 1.5 lmp.qt.) Fluid type IS250 (2WD) IS250 (AWD) 1.6 qt. (1.5 L, 1.4 lmp.qt.) 2.8 qt. (2.7 L, 2.4 lmp.qt.) Toyota Genuine ATF WS NOTICE Using automatic transmission fluid other than "Toyota Genuine ATF WS" may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmission of your vehicle. Manual transmission Gear oil capacity 1.9 qt. (1.8 L, 1.6 Imp.qt.) Gear oil type API GL-4 or GL-5 Recommended gear oil viscosity SAE75W-90 Clutch Clutch free play 0.2 0.6 in. (5 15 mm) Fluid type SAE J1703 or FMVSS No.116 DOT 3 376 6-1. Specifications Brakes Pedal clearance *1 IS 350 IS 250 Manual transmission Automatic transmission 4.13 in. (105 mm) Min. 4.09 in. (104 mm) Min. 4.3 in. (108 mm) Min. Pedal free play 0.04 0.08 in. (1.0 2.0 mm) Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) Parking brake pedal travel *2 / lever travel *3 Pedal type Lever type 7 9 clicks 4 6 clicks Fluid type SAE J1703 or FMVSS No. 116 DOT 3 *1: Minimum pedal clearance when depressed with a force of 50 kgf (490 N, 110 lbf) while the engine is running. *2: Parking brake pedal travel when depressed with a force of 30.6 kgf (300 N, 67.4 lbf). *3: Parking brake lever travel when pulled up with a force of 20.4 kgf (200 N, 50.0 lbf). 6 Vehicle specifications 377 6-1. Specifications Steering Free play Less than 1.2 in. (30 mm) Tires and wheels Type A Tire size 205/55R16 89W, T125/70D17 98M (spare) Driving under normal conditions Front tires: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear tires: Front and rear tire inflation pres38 psi (260 kPa, 2.6 kgf/cm2 or bar) sure Driving at high speeds above 100 mph (160 (Recommended cold tire inflation km/h) (in countries where such speeds are perpressure) mitted by law) Add 5.8 psi (40 kPa, 0.4 kgf/cm2 or bar) to the front tires and rear tires. Never exceed the maximum cold tire inflation pressure indicated on the tire sidewall. Spare tire inflation pressure (Recommended cold tire inflation 60 psi (420 kPa, 4.2 kgf/cm2 or bar, ) pressure) Wheel size 16 7JJ, 17 4T (spare) Wheel nut torque 10.5 kgf•m (103 N•m, 76 ft•lbf) 378 6-1. Specifications Type B Tire size 225/45R17 90W, 245/45R17 95W, T125/ 70D17 98M (spare) Driving under normal conditions Front tires: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear tires: Front and rear tire inflation pres38 psi (260 kPa, 2.6 kgf/cm2 or bar) sure Driving at high speeds above 100 mph (160 (Recommended cold tire inflation km/h) (in countries where such speeds are perpressure) mitted by law) Add 4.5 psi (30 kPa, 0.3 kgf/cm2 or bar) to the front tires and rear tires. Never exceed the maximum cold tire inflation pressure indicated on the tire sidewall. Spare tire inflation pressure (Recommended cold tire inflation 60 psi (420 kPa, 4.2 kgf/cm2 or bar) pressure) Wheel size 17 8JJ, 17 4T (spare) Wheel nut torque 10.5 kgf•m (103 N•m, 76 ft•lbf) 6 Vehicle specifications 379 6-1. Specifications Type C Tire size 225/45R17 91V, 225/45R17 91V, T125/ 70D17 98M Driving under normal conditions Front tires: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear tires: Front and rear tire inflation pres38 psi (260 kPa, 2.6 kgf/cm2 or bar) sure Driving at high speeds above 100 mph (160 (Recommended cold tire inflation km/h) (in countries where such speeds are perpressure) mitted by law) Add 7.2 psi (50 kPa, 0.5 kgf/cm2 or bar) to the front tires and rear tires. Never exceed the maximum cold tire inflation pressure indicated on the tire sidewall. Spare tire inflation pressure (Recommended cold tire inflation 60 psi (420 kPa, 4.2 kgf/cm2 or bar) pressure) Wheel size 17 8JJ, 17 4T (spare) Wheel nut torque 10.5 kgf•m (103 N•m, 76 ft•lbf) 380 6-1. Specifications Type D Tire size Front tires: 225/45R17 95V Rear tires: 245/45R17 95V Spare tire: T125/70R17 98M Driving under normal conditions Front tires: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear tires: Front and rear tire inflation pres38 psi (260 kPa, 2.6 kgf/cm2 or bar) sure Driving at high speeds above 100 mph (160 (Recommended cold tire inflation km/h) (in countries where such speeds are perpressure) mitted by law) Add 10 psi (70 kPa, 0.7 kgf/cm2 or bar) to the front tires and rear tires. Never exceed the maximum cold tire inflation pressure indicated on the tire sidewall. Spare tire inflation pressure (Recommended cold tire inflation 60 psi (420 kPa, 4.2 kgf/cm2 or bar) pressure) Wheel size 17 8JJ, 17 4T (spare) Wheel nut torque 10.5 kgf•m (103 N•m, 76 ft•lbf) 6 Vehicle specifications 381 6-1. Specifications Type E Tire size Front tires: 225/40R18 88Y Rear tires: 255/40R18 95Y Spare tire: T145/70R17 106M Driving under normal conditions Front tires: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear tires: Front and rear tire inflation pres38 psi (260 kPa, 2.6 kgf/cm2 or bar) sure Driving at high speeds above 100 mph (160 (Recommended cold tire inflation km/h) (in countries where such speeds are perpressure) mitted by law) Add 7.2 psi (50 kPa, 0.5 kgf/cm2 or bar) to the front tires and rear tires. Never exceed the maximum cold tire inflation pressure indicated on the tire sidewall. Spare tire inflation pressure (Recommended cold tire inflation 60 psi (420 kPa, 4.2 kgf/cm2 or bar) pressure) Wheel size Front wheels: 18 8J Rear wheels: 18 8 1/2J Spare wheel: 17 4T Wheel nut torque 10.5 kgf•m (103 N•m, 76 ft•lbf) 382 6-1. Specifications Light bulbs Light Bulbs Exterior Bulb No. W Type Headlights (low beam) Discharge bulbs Halogen bulbs D4S H11 35 55 A B Front turn signal lights 21 C Headlights (high beam) 9005 65 D Parking lights 168 5 E Front fog lights 9006 55 F 5 G 7440 21 E Back-up lights 921 16 E Outer foot lights 5 E Vanity lights 8 E Interior lights Front Rear 10 3.0 E G Overhead courtesy lights Front Rear 3.8 3.0 E G Door courtesy lights 3.8 E Trunk light Rear turn signal lights Interior Vehicle specifications A: B: C: D: E: F: G: 6 D4S discharge bulbs H11 halogen bulbs Wedge base bulbs (amber) HB3 halogen bulbs Wedge base bulbs (clear) HB4 halogen bulbs Double end bulbs 383 6-1. Specifications Fuel information Your vehicle must use only unleaded gasoline. Premium unleaded gasoline with an Octane Rating of 91 (Research Octane Number 96) or higher required for optimum engine performance. At minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada. ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Lexus has a fuel tank opening that only accomodates the special nozzle on unleaded fuel pumps. ■ If premium gasoline is not available If this premium fuel is not available, you may use unleaded gasoline with an Octane Rating of 87 or so (Research Octane Number 91). IS250: The use of such gasoline will cause persistent heavy knocking. If severe, this will lead to engine damage. IS350: The use of such gasoline may cause the engine to knock or drastically reduce output to protect itself while driving with a heavy load. To avoid this, refill the tank with premium unleaded gasoline as soon as possible. ■ If your engine knocks ● Consult your Lexus dealer. ● You may occasionally notice light knocking for a short time while accelerating or driving uphill. This is normal and there is no need for concern. ■ Gasoline quality In very few cases, driveability problems may be caused by the brand of gasoline you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Lexus dealer. 384 6-1. Specifications ■ Gasoline quality standards ● Automotive manufacturers in the US, Europe and Japan have developed a specification for fuel quality called World-Wide Fuel Charter (WWFC) that is expected to be applied worldwide. ● The WWFC consists of four categories that are based on required emission levels. In the US, category 4 has been adopted. ● The WWFC improves air quality by lowering emissions in vehicle fleets, and customer satisfaction through better performance. ■ Lexus recommends the use of gasoline containing detergent additives ● Lexus recommends the use of gasoline that contains detergent additives to avoid build-up of engine deposits. ● All gasoline sold in the US contains detergent additives to clean and/or keep clean intake systems. ■ Lexus recommends the use of cleaner burning gasoline Cleaner burning gasoline, including reformulated gasoline that contains oxygenates such as ethanol or MTBE (Methyl Tertiary Butyl Ether) is available in many areas. Lexus recommends the use of cleaner burning gasoline and appropriately blended reformulated gasoline. These types of gasoline provide excellent vehicle performance, reduce vehicle emissions and improve air quality. ■ Lexus does not recommend blended gasoline ● Lexus allows the use of oxygenate blended gasoline where the oxygenate con- tent is up to 10% ethanol or 15% MTBE. ● If you use gasohol in your Lexus, be sure that it has an octane rating no lower than 87. 6 ● Lexus DOES NOT recommend the use of gasoline containing methanol. Some gasoline contains octane enhancing additive called MMT (Methylcy clopentadienyl Manganese Tricarbonyl). Lexus DOES NOT recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected. The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Lexus dealer for service. 385 Vehicle specifications ■ Lexus does not recommend gasoline containing MMT 6-1. Specifications NOTICE ■ Notice on gasoline quality ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction. ● Do not use gasohol other than that stated here. Other gasohol may cause fuel system damage or vehicle performance problems. ● Using unleaded gasoline with an octane number or rating lower than that stated here will cause persistent heavy knocking. At worst, this will lead to engine damage. ■ Fuel-related poor driveability If after using a different type of fuel, poor driveability is encountered (poor hot starting, vaporization, engine knocking, etc.), discountinue the use of that type of fuel. ■ When refueling with gasohole Take care not to spill gasohol. It can damage your vehicle's paint. 386 6-1. Specifications Tire information Typical tire symbols Tire size DOT and Tire Identification Number (TIN) Location of tread wear indicators Tire ply composition and materials (P. 389) (P. 388) (P. 390) Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has RADIAL on the sidewall. A tire not marked RADIAL is a bias-ply tire. TUBELESS or TUBE TYPE 6 Load limit at maximum cold tire inflation pressure Maximum cold tire inflation pressure (P. 392) (P. 392) This means the pressure to which a tire may be inflated. Uniform tire quality grading For details, see "Uniform tire quality grading" that follows. 387 Vehicle specifications A tubeless tire does not have a tube and air is directly filled in the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure. 6-1. Specifications Summer tire or all season tire (P. 390) An all season tire has "M+S" on the sidewall. A tire not marked "M+S" is a summer tire. Typical DOT and tire identification number (TIN) DOT symbol* Tire Identification Number (TIN) Tire manufacturer's identification mark Tire size code Manufacturer's optional tire type code (3 or 4 letters) Manufacturing week Manufacturing year *: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards. 388 6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 or 3 digits) Speed symbol (alphabet with one letter) ■ Tire dimensions Section width Tire height Wheel diameter 6 Vehicle specifications 389 6-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer Uniform tire quality grading This information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S.A. Department of Transportation. It provides the purchasers and/or prospective purchasers of Lexus vehicles with information on uniform tire quality grading. Your Lexus dealer will help answer any questions you may have as you read this information. ■ DOT quality grades All passenger vehicle tires must conform to Federal Safety Requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A 390 6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. ■ Traction AA, A, B, C The traction grades, from highest to lowest, are AA, A, B and C, and they represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on braking (straight ahead) traction tests and does not include cornering (turning) traction. ■ Temperature A, B, C The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. 391 Vehicle specifications Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. 6 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. Glossary of tire terminology Tire related term Meaning Accessory weight The combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power seats, radio and heater, to the extent that these items are available as factory-installed equipment (whether installed or not) Cold tire inflation pressure Tire pressure when the vehicle has been parked for three hours or more, or has not been driven more than 1 mile or 1.5 km under that condition Curb weight The weight of a motor vehicle with standard equipment, including the maximum capacity of fuel, oil and coolant, and if so equipped, air conditioning and additional weight optional engine Maximum inflation pressure The maximum cold inflated pressure to which a tire may be inflated, shown on the sidewall of the tire Maximum loaded vehicle weight The sum of: (a) Curb weight (b) Accessory weight (c) Vehicle capacity weight (d) Production options weight Normal occupant weight 150 lb. (68 kg) times the number of occupants specified in the second column of Table 1* that follows 392 6-1. Specifications Tire related term Meaning Vehicle capacity weight (Total load capacity) The rated cargo and luggage load plus 150 lb. (68 kg) times the vehicle's designated seating capacity Intended outboard sidewall (a) The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or (b) The outward facing sidewall of asymmetrical tire that has a particular side that must always face outward when mounted on a vehicle Occupant distribution Distribution of occupants in a vehicle as specified in the third column of Table 1* below Recommended inflation pressure Cold tire inflation pressure recommended by a manufacturer. Rim A metal support for a tire or a tire and tube assembly upon which the tire beads are seated Rim diameter (Wheel diameter) Nominal diameter of the bead seat Rim size designation Rim diameter and width Rim type designation The industry manufacturer's designation for a rim by style or code Rim width Nominal distance between rim flanges 393 6 Vehicle specifications Production options weight The combined weight of installed regular production options weighing over 5 lb. (2.3 kg) in excess of the standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim 6-1. Specifications Tire related term Meaning The load on an individual tire that is determined by Vehicle maximum load on distributing to each axle its share of the maximum the tire loaded vehicle weight, and dividing by two Vehicle normal load on the tire The load on an individual tire that is determined by distributing to each axle its share of curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1* below), and dividing it by two Weather side The surface area of the rim not covered by the inflated tire *:Table 1 Occupant loading and distribution for vehicle normal load for various designated seating capacities Designated seating capacity, Number of occupants Vehicle normal load, Number of occupants Occupant distribution in a normally loaded vehicle 2 through 4 2 2 in front 5 through 10 3 2 in front, 1 in second seat 394 6-2. Customization Customizable features Your vehicle includes a variety of electronic features that can be personalized to your preferences. Programming these preferences requires specialized equipment and may be performed by an authorized Lexus dealership. Some function settings are changed simultaneously with other functions being customized. Contact your Lexus dealer for further details. Item Smart access system with push-button start (P. 4) Function Default setting Customized setting Smart access system with push-button start ON OFF Operation signal (Emergency flashers) ON OFF Operation signal (Buzzer) ON OFF Wireless remote control ON OFF Driver's door locked in one step, all doors locked in two steps All doors locked in one step. 30 seconds 60 seconds Operation signal (Emergency flashers) ON OFF Operation signal (Buzzer) ON OFF Unlocking operation Time elapsed before automatic door lock function is activated if door is not opened after being unlocked 6 395 Vehicle specifications Wireless remote control (P. 12) 6-2. Customization Item Wireless remote control (P. 12) Function Default setting Customized setting Trunk unlocking function ON OFF Trunk unlocking operation Push and hold Panic function 396 One short push ON OFF Driver's door locked in one step, all doors locked in two steps All doors locked in one step. Speed-detecting automatic door lock function (Manual transmissions) ON OFF Speed-detecting automatic door lock function (Automatic transmissions) OFF ON Opening driver's door unlocks all doors (Manual transmissions) ON OFF Opening driver's door unlocks all doors (Automatic transmissions) OFF ON Shifting gears to P unlocks all doors. ON OFF Shifting gears to position other than P locks all doors. ON OFF Unlocking using a key Door lock (P. 15) Push twice 6-2. Customization Item Power windows (P. 41) Moon roof (P. 44) Default setting Customized setting Linked door lock operation ON OFF Linked door key operation Open and close Wireless remote control linked operation ON OFF Linked door lock operation ON OFF Linked door key operation Open and close Open only Close only Open only Close only Linked operation of components when door key is used Slide only Tilt only Wireless remote control linked operation ON OFF Linked operation of components when wireless remote control used Slide only Tilt only Level 3 Levels 1 to 5 Light sensor sensitivity Time elapsed before headlights automatically turn off after doors are closed 6 0 seconds 30 seconds 60 seconds 90 seconds 397 Vehicle specifications Automatic light control system (P. 113) Function 6-2. Customization Item Windshield wipers and washer (P. 117) Function Default setting Customized setting Switching operation when the vehicle is stationary ON OFF Drip prevention function ON OFF Time elapsed before the drip prevention function operates Variable depending on the vehicle speed 3 seconds ON OFF Level 3 Level 1 to 5 Lexus parking Back sensor operation assist-sensor display and buzzer (P. 133) Buzzer volume Time elapsed before lights turn off Illumination (P. 201) 398 15 seconds 7.5 seconds 30 seconds Operation when the doors are unlocked ON OFF Operation after the engine switch turned OFF ON OFF Front foot well lighting ON OFF Shift lever lighting ON OFF Outer foot light ON OFF 6-3. Initialization Items to initialize After reconnecting or performing maintenance on the battery, the following items must be initialized for normal system operation. Item When to initialize Reference Power window • After reconnecting or changing the battery • After changing a fuse P. 41 Engine oil maintenance data After changing engine oil P. 264 Tire inflation pressure warning system • When the standard tire pressure changes by replacing tires or wheels • When tires are rotated • When tire pressure sensors are replaced • When driving with the tires inflated to a higher than standard tire pressure P. 276 6 Vehicle specifications 399 6-3. Initialization 400 For US owners 7 Reporting safety defects for U.S.A. owners ................... 402 401 Reporting safety defects for U.S.A. owners If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying the Lexus Division of Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-25LEXUS). ■ If NHTSA receives similar complaints It may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Lexus Division of Toyota Motor Sales, U.S.A., Inc. ■ To contact NHTSA You may either call the Auto Safety Hotline toll-free at 1-800-4249393 (or 366-0123 in the Washington, D.C. area) or write to: NHTSA, U.S.A. Department of Transportation, Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from the Hotline. 402 Index Alphabetical index............................ 404 What to do if......................................... 413 403 Alphabetical index Alphabetical index A A/C (Air conditioning system) ........ 162 ABS (Anti-lock brake system) ......... 139 Air conditioning filter ........................... 291 Air conditioning system (A/C) Air conditioning filter .........................291 Automatic air conditioning system....................................................162 Airbags Airbag operating conditions...........59 Airbag precautions for your child.......................................................... 63 Airbag warning light ........................330 Curtain shield airbag operating conditions..............................................59 Curtain shield airbag precautions .......................................... 63 General airbag precautions ........... 63 Locations of airbags............................ 57 Modification and disposal of airbags.................................................... 67 Proper driving posture .............55, 63 Side airbag operating conditions..............................................59 Side airbag precautions .................... 63 SRS airbags ............................................. 57 Alarm ............................................................52 Antenna ..................................................... 178 Anti-lock brake system (ABS) ......... 139 Armrest.....................................................224 Ashtrays......................................................217 Audio system Antenna ............................................... 178 AUX adapter........................................ 198 CD player/changer ............................ 181 MP3/WMA disc .................................187 Optimal use........................................... 195 404 Radio ......................................................... 174 Steering wheel audio switch..........199 Automatic air conditioning system ......................................................162 Automatic headlight leveling system .......................................................115 Automatic light control system.......... 113 Automatic transmission Automatic transmission .....................92 If the shift lever cannot be shifted from P....................................357 S mode .......................................................94 AUX adapter .......................................... 198 B BA (Brake assist)....................................139 Back-up lights Wattage .................................................383 Battery Checking..................................................271 If the vehicle has discharged battery ..................................................362 Preparing and checking before winter........................................151 Bottle holders.........................................209 Brake Fluid...........................................................270 Parking brake..........................................99 Brake assist (BA)....................................139 C Care Exterior....................................................244 Interior......................................................246 Seat belts ................................................247 Cargo capacity........................................147 Cargo hooks ..........................................230 CD changer...............................................181 Alphabetical index CD player................................................... 181 Chains.........................................................153 Child restraint system (CRS) Booster seats, definition.................... 68 Booster seats, installation..................72 Convertible seats, definition ........... 68 Convertible seats, installation .........72 Infant seats, definition ......................... 68 Infant seats, installation........................72 Installing CRS with lower anchorages...........................................75 Installing CRS with seatbelts ...........72 Installing CRS with top straps.........76 Child safety Airbag precautions ............................. 63 Battery precautions.............. 273, 364 Child restraint system ........................ 68 Child-protectors..................................... 16 How your child should wear the seatbelt............................................33 Installing child restraints.......................71 Moon roof.................................................46 Power window lock switch ............... 41 Power window precautions.............43 Removed electronic key battery precautions ....................................... 294 Seat belt comfort guide....................... 31 Seat belt extender precautions ..... 35 Seat belt precautions...........................34 Seat heater precautions........221, 223 Trunk..............................................................21 Child-protectors ....................................... 16 Cigarette lighter.....................................218 Cleaning Exterior....................................................244 Interior .....................................................246 Seat belts................................................ 247 Clock .......................................................... 213 Coat hooks..............................................228 Compass ..................................................238 Condenser ..............................................270 Console box ...........................................206 Cooling system Engine overheating.......................... 365 Cornering assist sensors .................... 133 Cruise control Cruise control......................................... 121 Dynamic radar cruise control........124 Cup holder ............................................. 208 Curtain shield airbags............................ 57 Customizable features .......................395 D Daytime running light system .............114 Defogger Rear window ......................................... 170 Side mirror.............................................. 170 Dimension................................................370 Dinghy towing............................... 157, 158 Display Dynamic radar cruise control........124 Satellite switch mode .........................214 Trip information .....................................110 Warning message.............................334 Do-it-yourself maintenance .............255 Door courtesy lights Door courtesy lights.......................... 201 Wattage................................................. 383 Door pockets..........................................209 405 Alphabetical index Engine switch ......................................... 89 Hood ....................................................... 258 How to start the engine .................... 89 If the engine will not start............... 356 Overheating ........................................ 365 Engine compartment cover............. 263 Engine coolant Capacity .................................................374 Checking............................................... 268 Preparing and checking before winter........................................151 Engine coolant temperature gauge ...................................................... 100 Engine immobilizer system .................50 Engine oil Capacity .................................................373 Checking................................................264 Preparing and checking before winter........................................151 Engine oil maintenance data ........... 267 EPS (Electric power steering) ..........139 Event data recorder ............................ 327 Doors Door glasses............................................. 41 Door lock....................................................15 Side mirrors............................................. 39 Driver's seat belt reminder light ...... 331 Driving Correct posture ....................................55 Procedures.............................................. 82 Driving position memory...................... 24 E Electric power steering (EPS).......... 139 Electronic key If your electronic key battery is discharged ....................................359 Emergency, in case of If the engine will not start ...............356 If the shift lever cannot be shifted from P...................................357 If the vehicle has discharged battery..................................................362 If the warning buzzer sounds......329 If the warning light turns on ..........329 If the warning message is displayed ............................................334 If you have a flat tire .........................348 If you lose your keys.........................358 If you think something is wrong...................................................325 If your electronic key battery is discharged ....................................359 If your vehicle becomes stuck..... 367 If your vehicle needs to be towed .................................................... 318 If your vehicle overheats................365 Engine Compartment .......................................261 406 F First-aid kit storage belt .....................230 Floor mat.................................................. 229 Fluid Brake ........................................................270 Washer....................................................274 Fog lights Switch..........................................................116 Wattage .................................................383 Foot well lighting.................................... 201 Front fog lights Switch..........................................................116 Wattage .................................................383 Alphabetical index Front passenger's seat belt reminder light.......................................331 Front seats Adjustment ...............................................22 Driving position memory ..................24 Seat position memory.........................27 Front turn signal lights Wattage .................................................383 Fuel Capacity..................................................372 Fuel gauge ............................................. 100 Fuel pump shut off system ............ 326 Gas station information ...................415 Information............................................384 Refueling ....................................................47 Fuel filler door............................................47 Fuel pump shut off system .................326 Fuses.......................................................... 295 G Garage door opener.......................... 233 Gas station information.......................415 Gauges...................................................... 100 Glove box ............................................... 205 Glove box light...................................... 206 H Head restraints Adjusting ..................................................29 Headlight aim ........................................ 309 Headlight cleaner ..................................120 Headlights Discharge headlights precautions .........................................316 Replacing light bulbs .........................310 Switch..........................................................113 Wattage .................................................383 Heaters Seat heaters .............................. 220, 222 Side mirror.............................................. 170 Hill-start assist control ......................... 139 Hood ..........................................................258 Hooks Cargo ......................................................230 Coat..........................................................228 Shopping bag ......................................230 I I/M test......................................................254 Illuminated entry system ....................202 Indicator lights......................................... 106 Initialization Items to initialize ................................ 399 Inside rear view mirror ..........................38 Interior lights Interior lights.......................................... 201 Switch.......................................................203 Wattage................................................. 383 J Jack Positioning the jack...........................259 Replacing the wheel........................ 348 Jack handle..............................................348 K Keys Electronic key .............................................2 Engine switch..........................................89 If you lose your keys........................ 358 If your electronic key battery is discharged.................................... 359 Key number .................................................2 Keys .................................................................2 Mechanical key..........................................2 Wireless remote control .....................12 407 Alphabetical index L Light bulbs Replacing................................................ 310 Wattage..................................................383 Lights Door courtesy lights...........................201 Fog light switch...................................... 116 Headlights switch ..................................113 Interior light switch............................203 Outer foot lights...................................201 Overhead courtesy light..................201 Personal light switch ........................203 Replacing light bulbs......................... 310 Scuff lighting...........................................201 Shift lever lighting ................................201 Turn signal lever....................................98 Vanity lights ............................................ 212 Wattage..................................................383 Limited slip differential (LSD)........... 139 Load capacity ..........................................150 LSD (Limited slip differential)........... 139 MP3 disc........................................................ 187 Multi-information display......................109 O Odometer ................................................ 100 Oil Engine oil................................................264 Opener Fuel filler door .........................................47 Hood ....................................................... 258 Trunk............................................................. 19 Outer foot lights Outer foot lights...................................201 Wattage .................................................383 Outside rear view mirrors Adjusting and folding..........................39 Driving position memory ..................24 Outside temperature display .............110 Overhead console............................... 207 Overhead courtesy lights Overhead courtesy lights...............201 Wattage .................................................383 Overheating, Engine............................. 365 M Maintenance Do-it-yourself maintenance .........255 General maintenance .......................251 Maintenance data..............................370 Maintenance requirements .......... 249 Manual transmission...............................96 Meter Instrument panel light control ........ 101 Meters ...................................................... 100 Mirrors Inside rear view mirror.......................38 Side mirror heater...............................170 Side mirrors............................................. 39 Vanity mirrors........................................ 212 Moon roof...................................................44 408 P Parking assist sensors...........................133 Parking brake............................................ 99 Parking lights Replacing light bulbs.........................310 Switch..........................................................113 Wattage .................................................383 PCS (Pre-collision system) ................144 Personal lights Switch...................................................... 203 Micro dust and pollen removal mode ........................................................166 Power outlet .............................................219 Power windows..........................................41 Alphabetical index Pre-collision system (PCS)................ 144 R Radar cruise control ............................. 124 Radiator.....................................................270 Radio ................................................................ 174 RDS (Radio date system).................... 175 Rear sunshade........................................225 Rear turn signal lights Replacing light bulbs .........................310 Wattage .................................................383 Rear view mirror Compass............................................... 238 Rear window defogger........................170 Replacing Electronic key battery ..................... 293 Fuses........................................................ 295 Light bulbs ..............................................310 Reporting safety defects for U.S.A. owners .................................... 402 S Scuff lighting.............................................201 Seat belts Adjusting the seat belt ......................... 31 Automatic Locking Retractor (ALR) .......................................................32 Child restraint system installation ................................................71 Cleaning and maintaining the seat belts......................................247 Emergency Locking Retractor (ELR)........................................................32 How to wear your seat belt............. 30 How your child should wear the seat belt...........................................33 Pregnant women, proper seat belt use..........................32 Reminder light ...................................... 331 Seat belt extenders ..............................33 Seat belt pretensioners ........................31 Seat heaters .................................220, 222 Seat position memory............................ 27 Seat ventilators ...................................... 222 Seating capacity.....................................150 Seats Child seats/child restraint system installation................................71 Cleaning.................................................246 Driving position memory.................. 24 Front passenger seat position memory.................................................. 27 Head restraint.........................................29 Properly sitting in the seat ................55 Seat adjustment ..................................... 22 Seat adjustment precautions........... 23 Seat heaters .............................. 220, 222 Ventilated seats .................................. 222 Service reminder indicators ............. 106 Shift lever Automatic transmission .....................92 If the shift lever cannot be shifted from P ...................................357 Manual transmission ...........................96 Shift lever lighting .................................. 201 Shift lock system....................................357 Shopping bag hooks............................230 Side airbags................................................ 57 Side marker lights Switch.......................................................... 113 Side mirror Adjusting and folding..........................39 Driving position memory.................. 24 409 Alphabetical index Smart access system with push-button start Entry function..............................................4 Starting the engine...............................89 Spare tire Inflation pressure................................285 Spare tire................................................348 Spark plug................................................374 Specifications .........................................370 Speedometer Speed indicator ................................... 100 Speedometer........................................ 100 Steering wheel Audio switches .....................................199 Driving position memory...................24 Manual adjustment .............................. 36 Power adjustment .................................37 Storage feature......................................205 Stuck If your vehicle becomes stuck..... 367 Sun visors ....................................................211 Sunshade Rear .......................................................... 225 Roof ............................................................. 45 Switch ECT switch .............................................. 93 Engine switch..........................................89 ETCS switch............................................ 96 Fog light switch...................................... 116 Light switches..........................................113 Power door lock switch......................15 Power window switch.......................... 41 Satellite switches ..................................214 Transmission shift switches.............. 94 Window lock switch ............................. 41 Wipers and washer switch...............117 410 T Tachometer Tacho indicator ....................................100 Tachometer............................................100 Tail lights Switch..........................................................113 Theft deterrent system Alarm...........................................................52 Engine immobilizer system............. 50 Theft prevention labels.......................... 54 Tire inflation pressure .........................285 Tire information Glossary .................................................392 Size...........................................................389 Tire identification number.............388 Uniform tire quality grading.........390 Tires Chains.......................................................153 Checking................................................275 If you have a flat tire ......................... 348 Inflation pressure ............................... 285 Inflation pressure sensor ................276 Information ........................................... 387 Replacing .............................................. 348 Rotating tires.........................................275 Size........................................................... 378 Snow tires................................................154 Tools...........................................................348 Total load capacity................................ 150 Towing Dinghy towing ........................... 157, 158 Emergency towing.............................318 Trailer towing ........................................156 TRAC (Traction control).....................139 Traction control (TRAC).....................139 Transmission shift switches....................94 Trip meter ................................................. 100 Alphabetical index Trunk Extending a space .............................227 Opener........................................................ 19 Trunk light Trunk light ................................................ 20 Wattage .................................................383 Turn signal lights Replacing light bulbs .........................310 Switch......................................................... 98 Wattage .................................................383 V Vanity lights Vanity lights............................................ 212 Wattage .................................................383 Vanity mirrors ............................................. 212 VDIM (Vehicle dynamics integrated management).................139 Vehicle dynamics integrated management (VDIM) .......................139 Vehicle identification number .......... 371 Vehicle stability control (VSC) ........139 Ventilators................................................222 VSC (Vehicle stability control) ........139 W Warning buzzers Brake system....................................... 329 Downshifting........................................... 95 Open door ............................................331 Seat belt reminder ............................330 Warning lights Anti-lock brake system (ABS) ...330 Brake assist system ..........................330 Brake system....................................... 329 Charging system...............................330 Electric power steering warning light.....................................330 Electronic engine control system ................................................. 330 Low fuel level ........................................ 331 Low tire pressure warning light ......................................................... 331 Master warning light.......................... 331 Open door............................................. 331 Pre-collision system......................... 330 Pretensioners...................................... 330 Seat belt reminder light.................... 331 SRS airbags.......................................... 330 Warning messages Anti-lock brake system (ABS)... 338 AWD system ...................................... 335 Brake assist (BA).............................. 338 Dynamic radar cruise control...........335, 339, 339 Engine oil level ....................................339 Engine oil maintenance ..................339 Engine oil pressure ...........................334 Hill-start assist control .................... 338 Hood........................................................339 Lexus parking assist sensor...................................... 335, 339 Moon roof .............................................339 Open door............................................339 Parking brake ......................................339 Pre-collision system............. 335, 339 Smart access system with push-button start ............................345 Steering lock........................................ 335 Tire inflation pressure warning system................... 335, 339 Traction control (TRC).................. 338 Trunk ........................................................339 Vehicle stability control (VSC).................................................. 338 411 Alphabetical index Washer fluid.........................................339 Washer Checking ................................................274 Preparing and checking before winter....................................... 151 Switch ..........................................................117 Washing and waxing...........................244 Weight Cargo capacity.....................................147 Load limits .............................................. 150 Weight ....................................................370 Wheels ......................................................289 Window glasses ....................................... 41 Window lock switch ................................ 41 Windows Power windows....................................... 41 Rear window defogger ....................170 Washer.......................................................117 Windshield wipers ......................................117 Wireless remote control Replacing the battery ......................293 WMA disc ................................................ 187 412 What to do if... What to do if... A tire punctures P. 348 If you have a flat tire P. 356 If the engine will not start The engine does not start P. 50 Engine immobilizer system P. 359 If the battery is discharged The shift lever cannot be moved out P. 357 If the shift lever cannot be shifted from P The engine coolant temperature gauge enters the red zone P. 365 If your vehicle overheats Steam can be seen coming from under the hood The key is lost P. 358 If you lose your keys The battery runs out P. 362 If the battery is discharged The doors cannot be locked P. 15 Doors The horn begins to sound P. 52 Alarm The vehicle is stuck in mud or sand P. 367 If the vehicle becomes stuck 413 What to do if... The warning light or indicator light comes on P. 329 If the warning light turns on ■Warning lights Brake system warning light or v P. 329 or P. 330 Driver’s seat belt reminder light P. 331 “ABS” warning light or P. 330 Low fuel level warning light P. 331 SRS warning light P. 330 Open door warning light Front passenger’s seat belt reminder light P. 331 Master warning light P. 331 Electric power steering warning light P. 330 P. 331 Pre-collision safety system warning light P. 330 Charging system warning light P. 330 Low tire pressure warning light P. 331 The warning message is displayed 414 Malfunction indicator lamp P. 334 If the warning message is displayed GAS STATION INFORMATION Auxiliary catch lever P. 258 Trunk opener P. 19 Hood lock release lever P. 258 Fuel tank capacity Fuel type Cold tire inflation pressure Engine oil capacity (Drain and refill) Engine oil type Fuel filler door opener P. 47 17.2 gal. (65L, 14.3 lmp.gal.) Unleaded gasoline only Fuel filler door P. 47 Tire inflation pressure P. 378 P. 48, 372 P. 378 qt. (L, Imp.qt.) IS250 IS250 (2WD models) (AWD models) IS350 With filler 6.6 (6.3, 5.5) 6.8 (6.4, 5.7) 6.6 (6.3, 5.5) Without filler 6.2 (5.9, 5.2) 6.3 (6.0, 5.3) 6.2 (5.9, 5.2) Toyota Genuine Motor Oil or equivalent Oil grade: ILSAC multigrade engine oil P. 373 Recommended oil viscosity: SAE-5W-30 415
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement