UM-7FT0A-001-00
User's manual
Information Display
User's manuals in other languages are available at : http://si.shimano.com
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found with the following items, contact the place of purchase or a bicycle dealer.
• Is the information display securely installed to the handlebar?
• Is there any noticeable damage to the electric wires?
Names of parts
IMPORTANT NOTICE
• Contact the place of purchase or a bicycle dealer for information on installation and adjustment of the products which are not found in the user's manual. A dealer's manual for professional and experienced bicycle mechanics is available on our website (http:// si.shimano.com).
• Do not disassemble or alter this product.
For safety, be sure to read this user's manual thoroughly before use, and follow them for correct use.
Information display
Important Safety Information
Guidelines that require replacement, contact the place of purchase or a bicycle dealer.
WARNING
• After reading the user's manual carefully, keep it in a safe place for later reference.
Note
• This is a small waterproof connector. Do not repeat connecting and disconnecting it. It may impair the function.
• The components are designed to be fully waterproofed to withstand wet weather riding conditions; however, do not deliberately place them into water.
• Do not clean the bicycle in a high-pressure car wash. If water gets into any of the components, operating problems or rusting may result.
• Handle the products carefully, and avoid subjecting them to any strong shocks.
• Be careful not to let water get into the terminal.
• Do not use thinners or similar substances to clean the products. Such substances may damage the surfaces.
• Contact the place of purchase for updates of the product software.
The most up-to-date information is available on the Shimano website.
• Products are not guaranteed against natural wear and deterioration from normal use and aging.
• For maximum performance we highly recommend Shimano lubricants and maintenance products.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Gear position
Battery indicator
Figure 1
0% 100%
Charging needed
Terminal section
Figure 2
0% 100%
*If the battery level is ZERO, not displayed on screen.
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Mar. 2018 by Shimano Inc. ITP