MSP 207
NOTE
VIEWSIZE THE WORLD
– Quick Start
For full installation, configuration, and operation details, refer to the
MSP 207 user manual, which is available at www.rgblink.com.
This guide provides quick start instructions for an experienced installer to set up and operate the MSP 207.
Installation and cabling features
1 2 3 4 5
IM
w
PO ww.
RT
AN
T rgb se lin k.c
r m uc tio od om an ns uc
fo ual t t r d fore o t he
Re fer the ins co
to
co tal nn po mp lat ec we let ion tin r s e u
in g t ou str he rce
.
pr
Control panel description
1
2
AUDIO input interface
VGA input interface
Output resolution:
4
3 RS422 control interface
LED indicator
VGA input
VGA input for connecting with PC equipments.
1024x768x60, 800x600x60, 640x480x60
AUDIO input
5 Power
Support audio signals from DVD player or audio sources;
Supported Standards: 48Kbps 24bit balance analog audio
Interface description
1
2
1 2
FORMAT LED digital
VGA output interface
3
4
3
Button
4
AUDIO output interface
FORMAT LED digital
Mainly display the CVBS output format.When output resolution is 480i60,LED digital display:N;When output resolution is 576i50,LED digital display:P;
When it is YPbPr output, LED digital display:0~7;
The formats are 576i50, 480i60, 576p50, 480p60, 720p50,
720p60, 1080i50, 1080i60.
RS422 control interface
First of all, get the male access of RS 422 interface
converter (hereinafter simplified as an interface converter) connect
RS-232 to MSP 207, the other end to RS232 to USB converter. Then, connect PC with RS232 to
USB cable. (If PC or control device h a s serial ports, the other end of the interface converter can be directly accessed to the control device.)
This can be shown as follows:
Interface of Male access
Cables connecting
RS-232 and RS-422 interface converter: B
C
D of RS422
F
E
H
G
Cable the converter
A
3
4
1
2
CVBS or YPbPr output
VGA output conncetor for output CVBS or YPbPr by convert cable. Used to connect monitor, projectors and other professional equipment;
CVBS output resolution: 480i60/NTSC, 576i50/PAL
YPbPr output resolution: 576i50,480i60,576p50,
480p60,720p50,720p60,1080i50,1080i60.
Buttons
Short time press: CVBS and YPbPr switch
Long time press: Switch the current output format
LED indicator
Red: Power indicator light when device has power supply.
Green lights when VGA input.
Audio output
Used to access speaker or the audio amplifier system.
Audio standard: 48Kbps 24bit balance analogue audio.
Powering Up
Connect one end of the power adapter with the device, the
other end into a socket. Plug in, red power indicator light
means the device works normally.
this device uses the standard 12V/1A power supply.
Software Operation
Select current small converter
Model in the pull-down list.
User can set Comm Port and
Comm Speed (Baudrate) through
“Comm setup”. User can select current using serial port by the pull-down arrow. Comm Speed should be 115200.
Click 〝 on 〞 button to open the serial port, the button will become 〝 OFF 〞 ,Click 〝 SYNC 〞 button can sync host computer software data with MSP 207.
NOTE
When user change input or output format, Should
push SYNC button to to make device operate correctly. For other operations, please refer to the fourth part
Communication Software Control Guideline.
Address:S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.com
MSP 207 Quick Start
Rev 1.0
Page 1 of 1
