RGBlink VSP5360 User Manual

RGBlink VSP5360 User Manual
VSP 5360
USER MANUAL
Article No: RGB-RD-UM-V5360 E001
Revision No: V1.6
CONTENTS
CONTENTS ..................................................................................................................................................... 1
Declarations .................................................................................................................................................. 3
FCC/Warranty ........................................................................................................................................ 3
Operators Safety Summary ................................................................................................................... 4
Installation Safety Summary.................................................................................................................. 4
Chapter 1 Your Product.................................................................................................................................. 6
1.1 In the Box......................................................................................................................................... 6
1.2 Product Overview ............................................................................................................................ 7
1.2.1 Back Panel ............................................................................................................................ 8
1.2.2 Front Panel ......................................................................................................................... 10
1.2.3 Dimension .......................................................................................................................... 12
Chapter 2 Installing Your Product ................................................................................................................ 13
2.1 Plugging in Signals ....................................................................................................................... 13
2.2 Plugging in Main Power ................................................................................................................. 13
2.3 Turning on Your Product ............................................................................................................... 13
Chapter 3 Using Your Product ...................................................................................................................... 15
3.1 Using the MENU Button .............................................................................................................. 15
3.2 Understanding the MENU Structure ............................................................................................. 16
3.3 Using the Menu ............................................................................................................................. 17
3.3.1 Understanding the Display ................................................................................................. 17
3.3.2 Understanding the Main Menu .......................................................................................... 18
3.3.3 Output Format Menu ......................................................................................................... 18
3.3.4 Screen Parameters Menu ................................................................................................... 19
3.3.5 Split Menu .......................................................................................................................... 19
3.3.6 Input Setup Menu .............................................................................................................. 20
3.3.7 Audio Setup Menu.............................................................................................................. 22
3.3.8 System Menu ...................................................................................................................... 22
3.3.9 Language Menu .................................................................................................................. 26
3.3.10 Factory Reset Menu.......................................................................................................... 26
3.4 3 Screen Preview Setting ............................................................................................................... 27
3.4.1 Select 3 Screen Preview Mode ........................................................................................... 27
3.4.2 3 Screen Preview Setting .................................................................................................... 27
3.4.3 Preset.................................................................................................................................. 28
3.4.4 Load .................................................................................................................................... 28
3.5 Single Image Switching .................................................................................................................. 29
3.6 Set the Output Resolution ............................................................................................................. 30
3.6.1 Select the Output Resolution ............................................................................................. 30
3.6.2 Custom the Output Resolution ........................................................................................... 30
3.7 Add or Clear the Layer ................................................................................................................... 32
3.8 Set the Size and Position ............................................................................................................. 33
3.9 Crop the Image ............................................................................................................................ 34
3.10 Zoom the Image ........................................................................................................................ 35
VSP 5360
User Manual
1
3.11 Set the Brightness and Color ..................................................................................................... 36
3.12 LOGO Capture ............................................................................................................................ 37
3.13 Screen Size Setting ..................................................................................................................... 38
3.14 DSK Setting ................................................................................................................................ 39
3.15 User Define BLACK Key .............................................................................................................. 40
3.16 User Define DSK Key .................................................................................................................... 41
3.17 Using Black Out............................................................................................................................ 42
3.18 Saving Views ................................................................................................................................ 43
3.19 Recall Saved Settings ................................................................................................................... 44
Chapter 4 Controlling Your Processor Remotely .......................................................................................... 45
4.1 Install the Software ....................................................................................................................... 45
4.2 Use the Software ........................................................................................................................... 48
Connection .................................................................................................................................. 48
Basic Operation ........................................................................................................................... 49
Tools ............................................................................................................................................ 55
Control ......................................................................................................................................... 57
Language ..................................................................................................................................... 58
Admin .......................................................................................................................................... 58
Help ............................................................................................................................................. 58
Refresh......................................................................................................................................... 59
Information Toolbar..................................................................................................................... 59
Chapter 5 Ordering Codes ........................................................................................................................... 60
5.1 Product .......................................................................................................................................... 60
5.2 Options .......................................................................................................................................... 60
5.2.1 Input Options...................................................................................................................... 60
5.2.2 Other Options ..................................................................................................................... 60
5.3 Sender Cards ................................................................................................................................. 60
Chapter 6 Support ..................................................................................................................................... 61
6.1 Questions and Troubleshooting..................................................................................................... 61
6.1.1 No Output in LED Display ................................................................................................... 61
6.1.2 Flash Point in LED Display Output ...................................................................................... 61
6.1.3 LED Display Only Displays part of the Image ...................................................................... 61
6.1.4 No Display in the Second Half of LED Display ..................................................................... 62
6.1.5 All Key Lights are on Simultaneously .................................................................................. 62
6.2 Contact Us ..................................................................................................................................... 63
Chapter 7 Appendix ..................................................................................................................................... 64
7.1 Specification .................................................................................................................................. 64
7.2 Software Upgrade .......................................................................................................................... 69
7.3 Installing Options ........................................................................................................................... 73
7.4 Using the Serial Cable .................................................................................................................... 79
7.5 Terms & Definitions ....................................................................................................................... 80
7.6 Revision History ............................................................................................................................. 84
VSP 5360
User Manual
2
Thank you for choosing our product!
This User Manual is designed to show you how to use this video processor quickly and make use of all
the features. Please read all directions and instructions carefully before using this product.
Declarations
FCC/Warranty
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area may cause harmful interference, in which case the user will be
responsible for correcting any interference.
Guarantee and Compensation
RGBlink provides a guarantee relating to perfect manufacturing as part of the legally stipulated
terms of guarantee. On receipt, the purchaser must immediately inspect all delivered goods for
damage incurred during transport, as well as for material and manufacturing faults. RGBlink must be
informed immediately in writing of any complains.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and
software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of
justified notice of compliant, RGBlink can repair the fault or provide a replacement at its own discretion
within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can
demand a reduction in the purchase price or cancellation of the contract. All other claims, in particular
those relating to compensation for direct or indirect damage, and also damage attributed to the
operation of software as well as to other service provided by RGBlink, being a component of the system
or independent service, will be deemed invalid provided the damage is not proven to be attributed to the
absence of properties guaranteed in writing or due to the intent or gross negligence or part of RGBlink.
If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if
the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if,
after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all
guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are
system failures which are attributed to programs or special electronic circuitry provided by the purchaser,
e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee provided by
RGBlink either.
The environmental conditions as well as the servicing and maintenance regulations specified in this
manual must be complied with by the customer.
VSP 5360
User Manual
3
Operators Safety Summary
The general safety information in this summary is for operating personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous
voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the
cover installed.
Power Source
This product is intended to operate from a power source that will not apply more than 230 volts rms
between the supply conductors or between both supply conductor and ground. A protective ground
connection by way of grounding conductor in the power cord is essential for safe operation.
Grounding the Product
This product is grounded through the grounding conductor of the power cord. To avoid electrical shock,
plug the power cord into a properly wired receptacle before connecting to the product input or output
terminals. A protective-ground connection by way of the grounding conductor in the power cord is
essential for safe operation.
Use the Proper Power Cord
Use only the power cord and connector specified for your product. Use only a power cord that is in good
condition. Refer cord and connector changes to qualified service personnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse having identical type, voltage rating, and current rating
characteristics. Refer fuse replacement to qualified service personnel.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Installation Safety Summary
Safety Precautions
For all VSP 5360 processor installation procedures, please observe the following important safety and
handling rules to avoid damage to yourself and the equipment.
To protect users from electric shock, ensure that the chassis connects to earth via the ground wire
provided in the AC power Cord.
The AC Socket-outlet should be installed near the equipment and be easily accessible.
Unpacking and Inspection
VSP 5360
User Manual
4
Before opening VSP 5360 processor shipping box, inspect it for damage. If you find any damage, notify
the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents
against the packing slip. If you find any shortages, contact your sales representative.
Once you have removed all the components from their packaging and checked that all the listed
components are present, visually inspect the system to ensure there was no damage during shipping. If
there is damage, notify the shipping carrier immediately for all claims adjustments.
Site Preparation
The environment in which you install your VSP 5360 should be clean, properly lit, free from static, and
have adequate power, ventilation, and space for all components.
VSP 5360
User Manual
5
Chapter 1 Your Product
1.1 In the Box
AC Power Cord
USB Cable
DVI-D Cable
DB9 to RJ11
Cable
RCA to BNC
Cable
Warranty Card &
USB Files
Screw Driver
Antistatic Bag
QC Declaration
Note:
AC Power Cable supplied as standard according to destination market.
USB is contained on the Warranty/Registration Card. Please keep.
VSP 5360
User Manual
6
Chapter 1: Your Product
1.2 Product Overview
The VSP 5360 is a landmark product which combines video processing algorithm CSMXP of
RGBlink. Seamless switching between the 13 inputs, DSK for subtitle overlay, preview and
program separately, 1 to 4 layers layout and seamless switching, multiple cascade with sync
splicing.
VSP 5360 is based on module based design, can easily expansion input interfaces including USB
inputs for media files play.
VSP 5360 launches the new milestone for video scaler and switcher by introducing the latest 10
bit motion adaptive de-interlace, advance noise reduction and detail enhancement core
processor.
VSP 5360 also release with seamless switching, cross and frame rate conversion with pixel based
scale and zoom engine up to 4K×2K.
VSP 5360 can be widely applied to switcher and scale market, especially for the best
presentation.
VSP 5360
User Manual
7
Chapter 1: Your Product
1.2.1 Back Panel
Input Connectors
9.11.13
BNC – CVBS
Standard CVBS signals can input.
10.12
DP
Standard DisplayPort signals can input.
15.17
DB15 – VGA
Standard VGA signals can input. Additionally this VGA port supports Component
(YPbPr) with the use of a VGA to Component adapter (supplied).
14.16.18
DVI-I – DVI
Standard DVI signals can input. The DVI port supports up to HDMI 1.3 if the port
format is set to HDMI.
20
BNC – 3G-SDI
Standard 3G-SDI signals can input.
26
Audio Connectors
Connect to the device with audio output connectors.
Output Connectors
21
BNC – 3G-SDI Loop Out
Connect to the SDI input of the next VSP 5360 or the device with SDI input.
22.23
DVI-I – DVI
Connect to the monitor or LED display which has DVI interface. (This connector does
not support hotplug).
24.25
DB15 – VGA
Connect to the monitor or LED display which has VGA interface. (This connector does
not support hotplug).
VSP 5360
User Manual
8
Chapter 1: Your Product
Control Connectors
1
Dial Switch
If the two dial switches are upwards, the device is in normal work, and if they are
downwards, the device is in upgrade state. OLED module light is off when the device
is in upgrade state. Some of the button lights turn on, and the device will not work.
2
RJ45 – Ethernet
Connect to Ethernet work for remote control by Windows software and for product
firmware upgrades.
3
USB-B – USB
Connect to Ethernet work for remote control by Windows software and for product
firmware upgrades.
4
RS232 - Serial
Connect to Ethernet work for remote control by Windows software and for product
firmware upgrades.
Power Connection
7
Power Switch
Illuminated power switch.
8
IEC – Power Input
Main power input AC 85-264V Max 45W.
Option Slots
19
Input Option Slots
Range of inputs are available for user fitting.
Refer to Product Input Options.
5.6
Sender Card Slots
Two Sender Cards can be installed in these slots.
Support sender Card types including Linsn, Nova and Colorlight (sold separately).
Refer to Product Sender Cards.
VSP 5360
User Manual
9
Chapter 1: Your Product
1.2.2 Front Panel
Display
5
OLED Display
Displays current status of the product, and for feature selections provides interactive
choices in conjunction with buttons on the front panel.
Multi-Function Buttons
6
Rotary Button
This button used for menu selections and confirmation.
The button is both rotary (turn to left and right), and push-button (confirm selection)
7
Rotary Button
This button used for volume adjustment.
Illuminated Buttons
1
Dedicated Signal Buttons
For each of inputs on the back panel a dedicated backlit buttons are provided. When lit,
the signal is selected for use, when red light is flashing, signal is in preview or the signal
is not available.
Additionally, each button in PRE bar is numbered and can be used as direct number
entry when values such as resolution and size.
2
Optional Signal Buttons
If optional input module is fitted, then these two buttons operate as per Dedicated
Signal Buttons above.
3
LOGO Button
Push LOGO button in PRE bar, the preview will display LOGO if there is LOGO, or it is
black.
4
BLACK Button
BLACK switch button, push the button, its LED light is on, program output will be
VSP 5360
User Manual
10
Chapter 1: Your Product
switched to black, push the button again, its LED light is off, and output the video
image.
Besides BLACK, user can define this button as FREEZE.
For more details, please refer to: User Define the BLACK Key.
8
Scale/Position Button
This button used for size and position adjusting.
9
Crop/Zoom Button
Crop and Zoom function reuse button.
Push the button to enter to crop menus.
Push the button again will enter to the zoom menus.
10
Bright/Color Button
This button used for bright and color adjusting.
11
Layers Button
These buttons used for layers choice. The LED light is on if the layer is open, and flashes
when the layer is selected.
12
Save Button
Save all current settings with the VSP 5360 to 1 of the 12 available slots.
For details, please refer to Saving Views.
13
Load Button
Restores/Loads all current settings with the VSP 5360 from 1 of the 12 available slots.
For details, please refer to Recall Saved Settings.
14
Split Button
This button used for split setting.
15
DSK Button
This button used for DSK setting.
For details, please refer to DSK Setting.
16
CUT Button
This button used for cut switching.
17
TAKE Button
This button used for seamless effect switching.
18
MENU Button
This button used for menu selections – refer to Understanding the MENU Structure.
Push the button again will return to the last level menu or exit the menu.
19
ENTER Button
Confirm button.
VSP 5360
User Manual
11
Chapter 1: Your Product
1.2.3 Dimension
Following is the dimension of VSP 5360 for your reference:
VSP 5360
User Manual
12
Chapter 2 Installing Your Product
2.1 Plugging in Signals
Connect signals to the product (ensure all devices are powered off first). Tighten connector
screws/locks where provided.
2.2 Plugging in Main Power
Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.
2.3 Turning on Your Product
Turn the power switch on the rear of the product to the ON position.
OLED display will show as below, completing initialization before loading last settings and
input/output configuration.
On delivery, CV1 will be the default input signal at [email protected], and the output format is
defaulted to 1920×[email protected]
VSP 5360
User Manual
13
Chapter 2: Installing Your Product
亮彩系列
AVDSP SERIES VSP 5360
Wait Init Device...
Wait Init Device
Finish!
PROGRAM
CV1:1920X1080X60
PREVIEW
CV2:1920X1080X60
OUTPUT FORMAT :1920X1080X60
IP ADDRESS
:192.168.0.100
VSP 5360
User Manual
14
Chapter 3 Using Your Product
3.1 Using the MENU Button
Push the [MENU] button to enter the menu display.
Turn the rotary knob to navigate to the menu item required. The  symbol shows the current
item. Push the knob to select and enter into the menu item.
As shown in the figure below:
VSP 5360
User Manual
15
Chapter 3: Using Your Product
3.2 Understanding the MENU Structure
The MENU structure is shown in the figure below:
VSP 5360
User Manual
16
Chapter 3: Using Your Product
3.3 Using the Menu
Use the menu system for convenient and intuitive operation. VSP 5360 OLED display shows the
menu items. The OLED display will show the default state when the menu is not in use, or the
operation has timed out. Using the MENU button and rotary knob in the front panel, the OLED
display will show the corresponding menus according to user selections.
3.3.1 Understanding the Display
Turn the power switch to the ON position, the OLED display will show the start-up interface and
show the default menu after completing initialization as below:
Introduce for the above information:
1
Program Signal
Shows the current program signal that is selected. The related dedicated signal
button will be lit red.
2
Preview Signal
Shows the current preview signal that is selected. The related dedicated signal button
will be lit red.
3
Program Input Resolution
Show the current program input resolution from the selected program input source.
To configure input resolutions, use the EDID Management features. A wide range of
input resolutions are supported depending the input – refer to Specification.
If a # symbol is show after the resolution, then a custom resolution is being used.
4
Preview Input Resolution
Show the current preview input resolution from the selected preview input source. To
configure input resolutions, use the EDID Management features. A wide range of
input resolutions are supported depending the input – refer to Specification.
If a # symbol is show after the resolution, then a custom resolution is being used.
5
Output Resolution
Show the current output resolution. To configure output resolutions, use the OUTPUT
VSP 5360
User Manual
17
Chapter 3: Using Your Product
menu. A wide range of resolutions are supported – refer to Specification.
If a # symbol is show after the resolution, then a custom resolution is being used.
6
IP address
Shows the IP address of the product.
When not displayed here, the serial number can be found via the SYSTEM menu.
3.3.2 Understanding the Main Menu
Push the MENU button in the default state and turn the rotary knob, the OLED display will show
the main menus as below:
->OUTPUT FORMAT
SCREEN PATAMETERS
SPLIT
INPUT SETUP
->AUDIO SETUP
SYSTEM
LANGUAGE
FACTORY RESET
>>
>>
>>
>>
>>
>>
ENG
>>
There are 8 menu items in the main menu, and display in 2 pages. Turn the rotary knob, and
select any menu above, push the rotary knob to confirm, the OLED display will show the
submenu. If push the MENU button, the OLED display will return to the last level menu.
3.3.3 Output Format Menu
->COMMON FORMAT
OTHERS FORMAT
CUSTOMIZED
GENLOCK
->EDID
>>
>>
>>
OFF
>>
COMMON FORMAT
There are 15 kinds of common resolutions.
OTHERS FORMAT
There are 25 kinds of others resolutions.
CUSTOMIZED
The special display project or LED display application would like to
require special resolution settings to meet the requirement--refer to Set
the Output Resolution.
VSP 5360
User Manual
18
Chapter 3: Using Your Product
GENLOCK
Enable or disable the Genlock function.
SOURCE PORT
Select the source port: RGBDVI, RGBHDMI or CUSTOM EDID.
EDID
DEST PORT
Select DVI1, DVI2 or DVI3.
START WRITE EDID
Start write EDID after select the source port and dest port.
3.3.4 Screen Parameters Menu
->SCREEN H SIZE
SCREEN V SIZE
SCREEN H POS
SCREEN V POS
->MODE
RESET
1920
1080
0
0
FULL SIZE
SCREEN H SIZE
Width setting.
SCREEN V SIZE
Height setting.
SCREEN H POS
Screen horizontal position setting.
SCREEN V POS
Screen vertical position setting.
MODE
Select screen size, full size, 16:9 or 4:3.
RESET
If image quality distorts by improper operation, it can be recover by reset.
3.3.5 Split Menu
->SPLIT
HORIZONTAL 1/2
VERTICAL 1/2
SPLIT
ON
>>
>>
Enable or disable the split function.
H TOTAL
The total width points of LED display that will split.
HORIZONTAL
1/2
V TOTAL
The total height points of LED display that will split.
FIRST WIDTH
The width of the device when do split.
START X
VSP 5360
User Manual
19
Chapter 3: Using Your Product
The horizontal position of the device when do split.
START Y
The vertical position of the device when do split.
H TOTAL
The total width points of LED display that will split.
V TOTAL
The total height points of LED display that will split.
VERTICAL 1/2
FIRST HEIGHT
The height of the device when do split.
START X
The horizontal position of the device when do split.
START Y
The vertical position of the device when do split.
3.3.6 Input Setup Menu
->PROGRAM SWITCH
INPUT CHECK ON/OFF
OUTPUT IMAGE SETTING
VGA ADJUST
>>
->ADC ADJUST
SDI ADJUST
OPTION INPUT ADJUST
PROGRAM
SWITCH
Enable or disable the program switch function.
INPUT CHECK
Enable or disable the input check function.
OFF
OFF
>>
>>
>>
>>
LAYER A 90 ROTATE
Select NO ROTATE, LEFT ROTATE or RIGHT ROTATE.
OUTPUT
IMAGE
SETTING
LAYER A MIRROR
Select NO MIRROR, H MIRROR, V MIRROR and IMAGE MIRROR.
LAYER B MIRROR
Select NO MIRROR or H MIRROR.
LAYER C MIRROR
Select NO MIRROR or H MIRROR.
LAYER D MIRROR
Select NO MIRROR or H MIRROR.
VGA ADJUST
H POS
Set the horizontal position.
V POS
VSP 5360
User Manual
20
Chapter 3: Using Your Product
Set the vertical position.
CLOCK
Set clock.
PHASE
Set phase.
AUTO ADJUST
Auto adjust VGA input signal H POS, V POS, CLOCK, PHASE, auto adjust to
display in full screen image.
INPUT MODE
Select VGA or YPbPr.
ADC AUTO ADJUST
Auto adjust ADC.
ADC ADJUST
ADC RESET ALL
When SDI input signal image shift, please adjust image’s H POS and V POS to
display in full screen image.
H POS
Set the horizontal position.
V POS
Set the vertical position.
BRIGHTNESS RED
Brightness red setting.
BRIGHTNESS GRN
Brightness green setting.
BRIGHTNESS BLUE
Brightness blue setting.
SDI ADJUST
CONTRAST
Contrast setting.
SATURATION
Saturation setting.
SHARPNESS
Sharpness setting.
COLOR RED
Color res setting.
COLOR GRN
Color green setting.
COLOR BLUE
Color blue setting.
RESET
If image quality distorts by improper operation, it can be recover by reset.
OPTION INPUT
ADJUST
VSP 5360
USB OPERATE
Turn the rotary to select the USB file.
H POS
Set the horizontal position.
User Manual
21
Chapter 3: Using Your Product
V POS
Set the vertical position.
RESET
If image quality distorts by improper operation, it can be recover by reset.
UPDATE USB INPUT BOARD
Update the USB input board version.
3.3.7 Audio Setup Menu
->MUTE
VOLUME
PIP AUDIO
DVI1
ON
50
MAIN
INTERNAL
->DVI2
DVI3
DP1
DP2
INTERNAL
INTERNAL
INTERNAL
INTERNAL
->SDI1
INTERNAL
MUTE
Enable or disable the mute function.
VOLUME
Volume adjusting.
PIP AUDIO
Select audio input source for IMAGE A main image or IMAGE B sub-image.
DVI1
Select DVI1 audio as INTERNAL embedded audio or EXTERNAL audio.
DVI2
Select DVI2 audio as INTERNAL embedded audio or EXTERNAL audio.
DVI3
Select DVI3 audio as INTERNAL embedded audio or EXTERNAL audio.
DP1
Select DP1 audio as INTERNAL embedded audio or EXTERNAL audio.
DP2
Select DP2 audio as INTERNAL embedded audio or EXTERNAL audio.
SDI1
Select SDI1 audio as INTERNAL embedded audio or EXTERNAL audio.
3.3.8 System Menu
->ETHERNET
LOGO CAPTURE
TEST PATTERN
OUTPUT ADJUST
VSP 5360
User Manual
>>
>>
>>
>>
22
Chapter 3: Using Your Product
->OUTPUT MATRIX
PREVIEW DISPLAY
SYSTEM MODE
TRANSITION
>>
>>
>>
>>
->SAVE SETUP
SYSTEM INFO
TECH SUPPORT
DATE&TIME
>>
>>
>>
>>
->LOCK FRONT PANEL
BLACK KEY FUNCTION
DSK KEY FUNCTION
LICENSE SETUP
->CAN USE TIME
USB UPDATE
>>
BLACK
DSK
>>
>>
>>
ETHERNET
Enable or disable the Ethernet function. Default IP address is
192.168.000.100, subnet mask is 255.255.255.000, gateway is
192.168.000.001.
LOGO
CAPTURE
Select the input source.
Freeze image, when capture, the program image should be frozen.
Set the image horizontal position, vertical position, horizontal size and vertical
size.
Save the image to LOGO1 or LOGO2.
Start to capture LOGO.
TEST PATTERN
OUTPUT
ADJUST
PROGRAM OUT IP
Enable or disable the program out IP function. When select “ON”, the
program out will switched to test pattern.
PREVIEW OUT IP
Enable or disable the preview out IP function. When select “ON”, the preview
out will switched to test pattern.
DVI1
Select the DVI MODE, BIT DEPTH and DATA RANGE, and set DE ADJUST. If
image quality distorts by improper operation, it can be recover by reset.
DVI2
Select the DVI MODE, BIT DEPTH and DATA RANGE, and set DE ADJUST. If
image quality distorts by improper operation, it can be recover by reset.
DVI OUTPUT
VSP 5360
User Manual
23
Chapter 3: Using Your Product
Select program or preview.
VGA1 OUTPUT
Select program or preview.
VGA2 OUTPUT
Select program or preview.
TEST PATTERN
Enable or disable the program/preview out IP function. When select “ON”,
the program/preview out will switched to test pattern.
There are 66 kinds of test patterns. If select <AUTO SWITCH>, VSP 5360 will
output all the test patterns one by one, and the interval between is 1 to10S.
DVI1
Select the DVI MODE, BIT DEPTH and DATA RANGE, and set DE ADJUST. If
image quality distorts by improper operation, it can be recover by reset.
DVI2
Select the DVI MODE, BIT DEPTH and DATA RANGE, and set DE ADJUST. If
image quality distorts by improper operation, it can be recover by reset.
OUTPUT
MATRIX
DVI OUTPUT
Select program or preview.
VGA1 OUTPUT
Select program or preview.
VGA2 OUTPUT
Select program or preview.
TEST PATTERN
Enable or disable the program/preview out IP function. When select “ON”,
the program/preview out will switched to test pattern.
There are 66 kinds of test patterns. If select <AUTO SWITCH>, VSP 5360 will
output all the test patterns one by one, and the interval between is 1 to10S.
PREVIEW DISPLAY
Enable or disable the preview display function.
DISPLAY POS X
The horizontal position of preview display setting.
PREVIEW
DISPLAY
DISPLAY POS Y
The vertical position of preview display setting.
DISPLAY COLOR RED
Color red of preview display setting.
DISPLAY COLOR GREEN
Color green of preview display setting.
DISPLAY COLOR BLUE
Color blue of preview display setting.
SYSTEM MODE
3 SCREEN PRVIEW
Default 3 screen preview mode.
For details, please refer to 3 Screen Preview Setting.
SPLIT
VSP 5360
User Manual
24
Chapter 3: Using Your Product
Select split mode, horizontal 1/2 and vertical 1/2 can be set.
OUTPUT MATRIX
Select output matrix, DVI1, DVI2, DVI OUTPUT, VGA1 OUTPUT, VGA2 OUTPUT
and test pattern can be set.
COMMON MODE
Can select common mode.
TRANSITION
FADE TIME
Fade time setting, the adjust range is between 0S~10S.
PREVIEW SWAP
Enable or disable the preview swap function.
SAVE TO
Provide 12 positions for saving parameters.
RECALL
Provide 12 saving modes for recall.
SAVE SETUP
CLEAR
Clear one saving mode.
CLEAR ALL
Clear all saving modes.
DELAY CALL
Delay recall time setting.
SYSTEM INFO
System information, including Com Board version, Core Image Pro version,
Back Pro Firmware version, Front Pro Firmware version, SDI version and
serious number.
TECH SUPPORT
Include the sales hotline, customer service number, company telephone
number, email and website.
DATE&TIME
Display the date, time, work time, total time and boot times. User can also
change the date and time.
LOCK FRONT
PANEL
Lock front panel function. If the key is locked, the equipment will remind:
"PRESS MENU+ENTER KEY TO UNLOCK PANEL!"
BLACK
KEY
FUNCTION
Default black function, can define this button as FREEZE.
For details, please refer to User Define BLACK Key.
DSK
KEY
FUNCTION
Default DSK function, can define this button as FREEZE.
For details, please refer to User Define DSK Key.
LICENSE SETUP
The device will not work if excess the prescribed time, there are no signal
output, it needs to input password and modify the using time to continue to
work.
CAN USE TIME
Display the rest of the working time.
USB UPDATE
User can upgrade the device by USB.
VSP 5360
User Manual
25
Chapter 3: Using Your Product
3.3.9 Language Menu
AUDIO SETUP
SYSTEM
->LANGUAGE
FACTORY RESET
LANGUAGE
>>
>>
ENG
>>
Select Chinese or English.
3.3.10 Factory Reset Menu
->FACTORY RESET
SAVE IP RESET
>>
>>
FACTORY RESET
Select “YES” or “NO”. Select “YES” to restore default settings.
SAVE IP RESET
Select “YES” or “NO”. Select “YES” to restore default settings, but keep the IP.
VSP 5360
User Manual
26
Chapter 3: Using Your Product
3.4 3 Screen Preview Setting
3.4.1 Select 3 Screen Preview Mode
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob, select <SYSTEM>:
AUDIO SETUP
->SYSTEM
LANGUAGE
FACTORY RESET
>>
>>
ENG
>>
2. Push the knob to confirm. Turn the knob, and select <SYSTEM MODE>:
OUTPUT MATRIX
PREVIEW DISPLAY
->SYSTEM MODE
TRANSITION
>>
>>
>>
>>
3. Push the knob to confirm. Turn the knob, and select <3 SCREEN PREVIEW>:
->3 SCREEN PREVIEW
SPLIT
OUTPUT MATRIX
COMMON MODE
>>
>>
>>
>>
4. Push the knob to confirm, and enter to the 3 screen preview modes.
3.4.2 3 Screen Preview Setting
VSP 5360 supports 3 Layers Preview and 3 layers Program seamless switching, select the layer, set
on Preview output, and switch it to the program output by the [CUT] or [TAKE] button.
Note
Layer A supports DVI3/SDI/LOGO output, and layer B
and layer C, any signal.
For example, to display the DVI3, VGA1, CVBS1 on preview monitor.
1. Select Layer B, and click VGA1 in PRE area, the [VGA1] light is on.
2. Select Layer A, and click DVI3 in PRE area, the [DVI3] light is on.
3. Select Layer C, and click CV1 in PRE area, the [CV1] light is on.
Then the VGA1, DVI3 and CV1 signals are displayed on the preview monitor display.
4. User can do the scale for any layer, the layer only changed on preview output, but not changed
VSP 5360
User Manual
27
Chapter 3: Using Your Product
on program output.
3.4.3 Preset
After setting, the layers on the preview output, we do not need to switching to the program
output. Push the [Save] button, the button light is on, and some of the buttons 0~12 in PRE area
are on, and some flash. The buttons on can be saved, and flash will be overwrite. Select the
location that need to save , for example, button 1, OLED shows as follows.
SAVE TO USER CONFIG MODE 1
SAVE IS SUCCESSFUL
3.4.4 Load
User can load the saved settings by pushing the [Load] button. For example, push button 1, the
SAVE 1 will display on preview monitor, then touch [TAKE] button to switch it to the program
display after confirmation.
VSP 5360
User Manual
28
Chapter 3: Using Your Product
3.5 Single Image Switching
VSP 5360 can realize seamless effects switch between two channels, select the signal in PRE area,
then push [CUT] or [TAKE] button, the signal will be switched to LED display.
For example, switch VGA1 to LED display, first push the [VGA1] button in PRE area, then push
[CUT] or [TAKE] button, and the LED display will show VGA1 signal.
Default the switch time is 1 seconds for [TAKE] button, if need to adjust the fade in fade out time,
push [MENU] button and enter to the menu items, turn the knob, select <SYSTEM>, push the
knob to confirm. Turn the rotary knob, select <TRANSITION>, and set the fade time, push the
[TAKE] button again, the signal will be switched to the LED display with the adjusted time.
User can also switch the signal by pushing the signal button in PRO area, but the signal in monitor
will not change.
VSP 5360
User Manual
29
Chapter 3: Using Your Product
3.6 Set the Output Resolution
3.6.1 Select the Output Resolution
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob and select
<OUTPUT FORMAT>:
->OUTPUT FORMAT
SCREEN PARAMETERS
SPLIT
INPUT SETUP
>>
>>
>>
>>
2. Push the rotary to confirm, and enter to the menus as below:
->COMMON FORMAT
OTHERS FORMAT
CUSTOMIZED
GENLOCK
>>
>>
>>
OFF
3. Push the rotary to confirm. Turn the rotary knob, select <COMMON FORMAT> or <OTHERS
FORMAT>, and select the output resolution according to actual need.
COMMON FORMAT
->1920×1080×60
3.6.2 Custom the Output Resolution
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob and select
<OUTPUT FORMAT>:
->OUTPUT FORMAT
SCREEN PARAMETERS
SPLIT
INPUT SETUP
>>
>>
>>
>>
2. Push the rotary to confirm, and enter to the menus as below:
VSP 5360
User Manual
30
Chapter 3: Using Your Product
->COMMON FORMAT
OTHERS FORMAT
CUSTOMIZED
GENLOCK
>>
>>
>>
OFF
3. Push the rotary to confirm. Turn the rotary knob, select <CUSTOMIZED>, push the knob to
confirm.
CUSTOMIZED
->1920×1080×60
4. Enter digits of desired resolution by pushing the red number buttons. For example, input 1536
as following:
CUSTOMIZED
*1536×
5. After the digital, push the rotary knob will add ×, means before × is the horizontal size. Same
operation for vertical size, For example, input 1536 as following:
CUSTOMIZED
*1536×1536×
6. After the digital, push the rotary knob will add ×, means before the × is the vertical size, and
after the × is the refresh rate. Only digital 50 or digital 60 supports for the refresh rate. For
example, input 60 as following. Use the digital buttons to finish the settings.
CUSTOMIZED
->1536×1536×60.0
7. After input all the values, push the rotary knob to enable VSP 5360 to output this resolution.
VSP 5360 will take 5~10 seconds to enable this output resolution.
VSP 5360
User Manual
31
Chapter 3: Using Your Product
3.7 Add or Clear the Layer
Push any button of A, B, C, D in LAYERS area, or push all the 4 buttons, the button light is on, and
the layer is selected, add layer finished.
For example, add layer B, push button B, button B light is on, and the OLED panel shows as
follows:
ON LAYER B
H POS :
0
H SIZE: 1024
V POS :
0
V SIZE: 768
In LAYERS area, push any key of button A, B, C, D that to clear, the button light flashes. Push the
button again, key light is off, and clear layer finished.
For example, clear layer B, OLED panel shows as follows:
OFF LAYER B
VSP 5360
User Manual
32
Chapter 3: Using Your Product
3.8 Set the Size and Position
Push the [Scale/Position] button, and enter to the scale menus, the OLED module show as
follows:
->H SIZE
V SIZE
H/V
H POS
1920
1080
0
0
->V POS
FAST SCALE MODE
RESET
0
FULL SIZE
The lights of number button 0~9 are on, user can adjust the following items by rotary knob or
number buttons.
H SIZE: Width setting.
V SIZE: Height setting.
H/V: Width and height equal proportion scale setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
FAST SCALE MODE: User can choose FULL SIZE, SCREEN SIZE, 16:9 or 4:3.
RESET: If image quality distorts by improper operation, it can be recover by reset.
VSP 5360
User Manual
33
Chapter 3: Using Your Product
3.9 Crop the Image
1. Push the [Crop/Zoom] button, the button light is on and open the crop function.
->H LEFT CROP
V UP CROP
H RIGHT CROP
V DOWN CROP
0
0
1024
768
->RESET
2. The lights of number button 0~9 are on, user can crop H LEFT, V UP, H RIGHT, V DOWN of the
image by knob or number buttons.
3. If image quality distorts by improper operation, it can be recover by reset.
VSP 5360
User Manual
34
Chapter 3: Using Your Product
3.10 Zoom the Image
The image can be zoom in horizontal or vertical separately, to meet the special effects required.
Push the [Crop/Zoom] button, and enter to the menu items, user can zoom the image by the
rotary knob or number buttons, settings are as follows:
->V UP
V DOWN
V UP/DOWN
H LEFT
0
0
0
0
->H RIGHT
H LEFT/RIGHT
CENTER
RESET
0
0
0
0
V UP: Zoom in vertical and the image will be zoom in to the top direction from its bottom.
V DOWN: Zoom in vertical and the image will be zoom in to the down direction from its top.
V UP/DOWN: Zoom in vertical but in both top and down direction from its middle.
H LEFT: Zoom in horizontal and the image will be zoom in to the left direction from its right.
H RIGHT: Zoom in horizontal and the image will be zoom in to the right direction from its left.
H LEFT/RIGHT: Zoom in horizontal but in both left and right direction from its middle.
CENTER: Zoom in 4 corner direction from center.
RESET: If image quality distorts by improper operation, it can be recover by reset.
VSP 5360
User Manual
35
Chapter 3: Using Your Product
3.11 Set the Brightness and Color
Push the [Bright/Color] button, and enter to the menu items, user can adjust the brightness and
color of the image by the rotary knob or number buttons, settings are as follows:
->SET MAX ALPHA
BRIGHTNESS
CONTRAST
SATURATION
128
50
50
50
->SHARPNESS
COLOR RED
COLOR GREEN
COLOR BLUE
0
0
1024
768
->RESET
SET MAX ALPHA: Set the max alpha of the image, the adjust range is among 0~128.
BRIGHTNESS: It can change the image brightness via BRIGHTNESS setting.
CONTRAST: It can change the image contrast via CONTRAST setting.
SATURATION: It can change the image saturation via SATURATION setting.
SHARPNESS: It can change the image sharpness via SHARPNESS setting.
COLOR RED: It can change the image color red via this setting.
COLOR GREEN: It can change the image color green via this setting.
COLOR BLUE: It can change the image color blue via this setting.
RESET: If image quality distorts by improper operation, it can be recover by reset.
Note: Users can set according to their actual situation, this function mainly suitable for these
professional operator who knows how to set the image quality correctly. Others are not
comments to do these operations. If image quality distorts by improper operation, it can be
recover by reset.
VSP 5360
User Manual
36
Chapter 3: Using Your Product
3.12 LOGO Capture
1. Push the [MENU] button and enter to the menu items, turn the knob, and select <SYSTEM>,
push the knob to confirm, turn the knob, and select <LOGO CAPTURE> option, OLED shows as
follows:
->SELECT INPUT
FREEZE IMAGE
H POS
V POS
->H SIZE
V SIZE
SAVE TO
START CAPTURE LOGO
LOGO
OFF
0
0
1024
768
LOGO 1
2. Select the input source.
3. Freeze image, when capture LOGO, the program image should be frozen.
4. Set the LOGO horizontal position, vertical position, horizontal size and vertical size.
5. Save the image to LOGO1 or LOGO2.
6. Start to capture LOGO.
Note
The [LOGO] button can also fulfill this setting.
VSP 5360
User Manual
37
Chapter 3: Using Your Product
3.13 Screen Size Setting
VSP 5360 supports the screen parameters to meet the requirement where user want to switch
between scale screen size and full display size (like monitor). This is only enable for a single
display window. Following is an example of a screen size is1408 x 832.
Operator can defined the VSP 5360 output resolution from standard output resolution list or
customized the output resolution which is higher than 1408 x 832. For this application 1440x900
is an example:
Push the [MENU] button to go into the menu items, turn the knob and choose <SCREEN
PARAMETERS>, push the knob and goes into the screen menus as following:
SCREEN H SIZE--Horizontal pixels, turn knob or use the digital button to input the value1408.
SCREEN V SIZE--Vertical pixels, turn knob or use the digital button to input the value 832.
SCREEN H POS--Horizontal position, default value is 0, set the value as the way of H SIZE and V
SIZE.
SCREEN V POS--Vertical position, default value is 0, set the value as the way of H SIZE and V SIZE.
MODE-- Mode option, choose SCREEN SIZE.
VSP 5360
User Manual
38
Chapter 3: Using Your Product
3.14 DSK Setting
Before setting the text overlay, please make sure the input channel of the text. For example,
select DVI3, the operations are as follows:
1. Push the [DVI3] button, and make sure there is input signal, and OLED shows DVI3 signal.
2. Set the size and position of DVI3: Push the [DVI3] button in PRE area, the button light is on, and
the image can be edited, push the [Scale/Position] button to set the size.
->H SIZE
V SIZE
H/V
H POS
1920
1080
1920
0
->V POS
FAST SCALE MODE
RESET
0
FULL SIZE
3. Select the input signal that will overlay in PRE area.
4. Push the [DSK] button, and open the DSK function.
->DSK
SELECT INPUT
PRESET
ALPHA
ON
DVI3
USER
0
Turn the knob and select <PRESET>, push the knob to confirm, select the preset mode of DVI3,
for example, WhOnBk2, push the knob to confirm.
DSK
SELECT INPUT
->PRESET
ALPHA
0
DVI3
WhOnBk2
0
5. Push the [SAVE] button, and save the above settings.
VSP 5360
User Manual
39
Chapter 3: Using Your Product
3.15 User Define BLACK Key
Default the [BLACK] button as black function. Push the button, its LED light is on, the output will
be switched to black, push the button again, its LED light is off, and output the video image.
For more details, please refer to: Using Black Out.
Besides BLACK, user can define this button as FREEZE, the operations are as follows:
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob, select <SYSTEM>:
AUDIO SETUP
->SYSTEM
LANGUAGE
FACTORY RESET
>>
>>
ENG
>>
2. Push the knob to confirm, turn the rotary knob, and select <BLACK KEY FUNCTION>:
LOCK FRONT PANEL
->BLACK KEY FUNCTION
DSK KEY FUNCTION
LICENSE SETUP
>>
BLACK
DSK
>>
3. Push the knob to confirm, turn the rotary knob, and select <FREEZE>, push the knob to
confirm:
LOCK FRONT PANEL
* BLACK KEY FUNCTION
DSK KEY FUNCTION
LICENSE SETUP
>>
FREEZE
DSK
>>
After selecting <FREEZE>, push the button, its LED light is on, and freeze the image.
FREEZE IMAGE
Push the button again, its LED light is off, and output the video image.
VIDEO IMAGE
VSP 5360
User Manual
40
Chapter 3: Using Your Product
3.16 User Define DSK Key
Default the [DSK] button as DSK function. Push the button, its LED light is on, and enter to the
DSK menu items.
For more details, please refer to: DSK Setting.
Besides DSK, user can define this button as FREEZE, the operations are as follows:
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob, select <SYSTEM>:
AUDIO SETUP
->SYSTEM
LANGUAGE
FACTORY RESET
>>
>>
ENG
>>
2. Push the knob to confirm, turn the rotary knob, and select <DSK KEY FUNCTION>:
LOCK FRONT PANEL
BLACK KEY FUNCTION
->DSK KEY FUNCTION
LICENSE SETUP
>>
BLACK
DSK
>>
3. Push the knob to confirm, turn the rotary knob, and select <FREEZE>, push the knob to
confirm:
LOCK FRONT PANEL
BLACK KEY FUNCTION
* DSK KEY FUNCTION
LICENSE SETUP
>>
BLACK
FREEZE
>>
After selecting <FREEZE>, push the button, its LED light is on, and freeze the image.
FREEZE IMAGE
Push the button again, its LED light is off, and output the video image.
VIDEO IMAGE
VSP 5360
User Manual
41
Chapter 3: Using Your Product
3.17 Using Black Out
Black out description:
BLACK signal realizes one-key-touch to the black screen.
VSP 5360 BLACK provides effect processing for Program output and Preview output with fade in
fade out effect. Operations are as follows:
1. Select output signal.
2. Push the [BLACK] button, the button light is on.
3. Then push the [TAKE] button, and the LED display is switched to black with fade in fade out
effect, as shown below:
VSP 5360
User Manual
42
Chapter 3 : Using Your Product
3.18 Saving Views
VSP 5360 provides 12 positions for saving or recording parameters. To save current parameters
and settings:
1. Push the [Save] button, the button light is on, and enable the SAVE function.
PUSH THE LEDS ARE ON TO SAVE
Button is on can be saved
Button flashes will be overwrite
2. Some of the buttons 0~12 in PRE area are on, and some flash. The buttons on can be saved,
and flash will be overwrite. Select the location that need to save, for example, button 1, OLED
shows as follows.
SAVE TO USER CONFIG MODE 1
SAVE IS SUCCESSFUL
3. User can also push the [MENU] button to enter the menu items, and choose <SYSTEM> option,
turn the knob and choose <SAVE TO>, show as follows:
->SAVE TO
RECALL
CLEAR
CLEAR ALL
>>
>>
SAVE1
>>
4. Push the knob to confirm. Turn the knob again, and choose the save mode, for example, save to
mode1, OLED shows as follows:
SAVE TO USER CONFIG MODE 1
SAVE IS SUCCESSFUL
Note
If position 1 is saved, this will be recalled and loaded
at power on.
VSP 5360
User Manual
43
Chapter 3: Using Your Product
3.19 Recall Saved Settings
VSP 5360 provides 12 positions for saving or recording parameters. To recall saved settings:
1. Push the [Load] button, the button light is on, and enable the LOAD function.
Some of the number buttons 0~12 in PRE area are on and some flash. The buttons on is ready
for recall, and flashes means just recall. OLED shows as follows:
PUSH THE LEDS ARE ON TO RECALLLED
Button on is ready for recall
Button flashes means just recall
2. Push the button on to load, for example, button 1, OLED shows as follows:
RECALL USER CONFIG MODE 1
RECALL IS SUCCESSFUL
PROGRAM INPUT:CV2
VSP 5360
User Manual
44
Chapter 4 Controlling Your Processor
Remotely
4.1 Install the Software
Double click
to install, default English version, click “next”:
And in next dialog is the user agreement of the software, click Agree to go on:
VSP 5360
User Manual
45
Chapter 4: Controlling Your Processor Remotely
User can select “Change” to choose the VSP 5360 install software:
Click “Next”:
Click “Next”:
VSP 5360
User Manual
46
Chapter 4: Controlling Your Processor Remotely
Click “Next” to go on:
Click “Finish” and ready to run VSP 5360 console:
VSP 5360
User Manual
47
Chapter 4: Controlling Your Processor Remotely
4.2 Use the Software
Double click
icon from home screen, and select
VSP 5360 communication software interface as shown:
to run the software.
Connection
Besides the power cord, the product equipped with the DB9 to RJ11 cable to connect VSP 5360
to the windows control program.
Note
RS 232 port and USB port can do 100M program
upgrade.
For Ethernet, user can fill any number less than1023 in local port, the remote port must be
192.168.0.100 and the remote port must be 1000. After setting above, click the icon
connect with the net work. If successful connect, the icon becomes
button showing
VSP 5360
to
, status on the left
.
User Manual
48
Chapter 4: Controlling Your Processor Remotely
Basic Operation
Image Toolbar
Show the image information, including layer, size and position.
Preview Screen
Left part is preview screen, the top left corner
information, layer, size and position, can preview the input signals.
shows input signal
buttons correspond with
preview channel, can be switched to program screen by
or
button.
Program Screen
Right part is program screen, the top left corner
VSP 5360
User Manual
shows input signal information,
49
Chapter 4: Controlling Your Processor Remotely
layer, size and position.
buttons
correspond with program channel, and program output image can be switched by these button.
User can adjust the program image by setting the size and position.
Basic
Interface is as follows:
Choose different output resolutions by selecting from scrolling down list:
Custom format setting.
User can choose enable or disable the Full Screen, Output Synchro.
Set the X, Y, Width and Height according to actual need. Click Set after finish. If image quality
distorts by improper operation, it can be recover by reset.
Set the alpha, the setting range is among 0 to 128.
Enable or disable the PIP function, VSP 5360 supports 12 kinds of PIP modes.
Fade time setting.
Layer
Add or clear the layer by selecting Layer 1, Layer 2, Layer 3 or Layer 4.
VSP 5360
User Manual
50
Chapter 4: Controlling Your Processor Remotely
Image 1
Include the following settings.
Scale
Scale the image by adjust X, Y, Width and Height. Click “Set” after finish. If image quality distorts
by improper operation, it can be recover by reset.
Zoom
Zoom the image. Click “Set” after finish. If image quality distorts by improper operation, it can be
recover by reset.
Crop
Crop the image. Click “Set” after finish. If quality image distorts by mistake in improper operation,
it can be initialized operation to recover factory setting.
Display
Set the brightness, contrast, sharpness, saturation and color temp. If quality image distorts by
mistake in improper operation, it can be initialized operation to recover factory setting.
Mirror
Rotate: User can select None, Left 90 and Right 90.
Mirror: User can select None, H Mirror, V Mirror and HV Mirror.
VSP 5360
User Manual
51
Chapter 4: Controlling Your Processor Remotely
Image 2
Include the following settings.
Scale
Scale the image by adjust X, Y, Width and Height. Click “Set” after finish. If image quality distorts
by improper operation, it can be recover by reset.
Zoom
Zoom the image. Click “Set” after finish. If image quality distorts by improper operation, it can be
recover by reset.
Crop
Crop the image. Click “Set” after finish. If quality image distorts by mistake in improper operation,
it can be initialized operation to recover factory setting.
Display
Set the brightness, contrast, sharpness, saturation and color temp. If quality image distorts by
mistake in improper operation, it can be initialized operation to recover factory setting.
Mirror
Rotate: User can choose None, Left 90 and Right 90.
Mirror: User can choose None, H Mirror, V Mirror and HV Mirror.
VSP 5360
User Manual
52
Chapter 4: Controlling Your Processor Remotely
Image 3
Include the following settings.
Scale
Scale the image by adjust X, Y, Width and Height. Click “Set” after finish. If image quality distorts
by improper operation, it can be recover by reset.
Zoom
Zoom the image. Click “Set” after finish. If image quality distorts by improper operation, it can be
recover by reset.
Crop
Crop the image. Click “Set” after finish. If quality image distorts by mistake in improper operation,
it can be initialized operation to recover factory setting.
Display
Set the brightness, contrast, sharpness, saturation and color temp. If quality image distorts by
mistake in improper operation, it can be initialized operation to recover factory setting.
Mirror
Rotate: User can select None, Left 90 and Right 90.
VSP 5360
User Manual
53
Chapter 4: Controlling Your Processor Remotely
Mirror: User can select None, H Mirror, V Mirror and HV Mirror.
Image 4
Include the following settings.
Scale
Scale the image by adjust X, Y, Width and Height. Click “Set” after finish. If image quality distorts
by improper operation, it can be recover by reset.
Zoom
Zoom the image. Click “Set” after finish. If image quality distorts by improper operation, it can be
recover by reset.
Crop
Crop the image. Click “Set” after finish. If quality image distorts by mistake in improper operation,
it can be initialized operation to recover factory setting.
Display
Set the brightness, contrast, sharpness, saturation and color temp. If quality image distorts by
mistake in improper operation, it can be initialized operation to recover factory setting.
Mirror
Rotate: User can select None, Left 90 and Right 90.
VSP 5360
User Manual
54
Chapter 4: Controlling Your Processor Remotely
Mirror: User can select None, H Mirror, V Mirror and HV Mirror.
Save
Click the following save button to save the parameters.
Load
Click the following save button to load the saved parameters.
Split Joint
Select the split mode and set the split parameters.
Tools
Logo Capture
Select input source and freeze image, set the position and size, and save to Logo 1 or Logo 2, then
start logo capture.
Output Adjust
Select output port, output mode, output type, etc, and set the parameters.
VSP 5360
User Manual
55
Chapter 4: Controlling Your Processor Remotely
SDI
Set the position, brightness, saturation, contrast, sharpness and color temp of SDI signal.
DSK
Enable the DSK switch function, select title input source, default mode and set value, and set the
alpha and color.
EDID
User can read, write and custom EDID.
Audio
Choose input audio and set the volume.
VSP 5360
User Manual
56
Chapter 4: Controlling Your Processor Remotely
Option Input
Set the position of the option input, anti-alias processing is available for SDI signal.
Control
Device Update
VSP 5360
User Manual
57
Chapter 4: Controlling Your Processor Remotely
Device IP
Users can set equipment IP, usually used when one computer control many devices or remote
control. It takes effect immediately after users change IP through serial port, and when users
change IP through network, it takes effect after reopen the software.
Factory Setup
Click “Factory Setup”, previously saved user mode will be cleared.
Language
This software supports both Chinese and English. User can switch the language by “Language”
option.
Admin
Advance Debug:User should input the password in the “Admin Password” dialog for advance
debug.
Note
Advance is only done by engineer. If need, please
connect us for password.
Help
Version Explain: Show the content of software update history.
About: Show software version and company information.
VSP 5360
User Manual
58
Chapter 4: Controlling Your Processor Remotely
Refresh
Refresh the current page.
Information Toolbar
It shows the VSP 5360 software version, core board version, firmware version and the serial
number in the bottom of the software interface.
VSP 5360
User Manual
59
Chapter 5 Ordering Codes
5.1 Product
100-5360-01-0
VSP 5360
5.2 Options
5.2.1 Input Options
190-0628-01-0
190-0628-02-0
190-0628-03-0
190-0628-04-0
190-0628-05-0
190-0628-06-0
190-0628-07-0
Dual CVBS/Composite Input Module
2 × CVBS
Dual USB Input Module
2 × USB
Dual VGA Input Module
2 × VGA
Dual HDMI Input Module
2 × HDMI
Dual DVI Input Module
2 × DVI
Dual SDI Input/Loop Module
2 × BNC for 3G-SDI each with loop
4K Display Port & HDMI Input Module
1 × DP1.2 + DP1.2 LOOP + HDMI1.4
5.2.2 Other Options
200-2048-01-0
CP 2048
5.3 Sender Cards
RCRCPJ00090
RCRCPJ00091
RCRCPJ00110
RCRCPJ00112
RCRCFJ00133
VSP 5360
Linsn TS801
Linsn TS802
Nova MSD300
Nova MSD600
Colorlight iT7
User Manual
60
Chapter 6 Support
6.1 Questions and Troubleshooting
6.1.1 No Output in LED Display
Frequently Asked
Question
No output in LED Display
Confirm If There is Any Input Signal
Check whether the input signal is normal, if normal, check the front-end
signal lines, and please note to do dual display or extended in computer .
User can enter other format signals to view in the same operation.
Troubleshooting
Confirm If Signal Output
Find a belt VGA input (best for DVI) display, connect to the corresponding
output port of processor, and check whether the signal is correct on the
monitor. If not display properly, please check whether there is input signal,
or if input wire interface is taken tight, output wire interface is picked up
tightly. If display normally, check if sending card is normally working or need
to replace sending card test.
6.1.2 Flash Point in LED Display Output
Frequently Asked
Question
Flash point in LED display output
Troubleshooting
Confirm If Monitor Output is Normal
Find a belt VGA input (best for DVI) display, connect to the corresponding
output port of processor, and check whether the signal is correct on the
monitor. If display normally shows and no flash point, please check whether
DVI outlets put tight or replace to DVI line of sending card. If display flashes
point, please judge if input signal, wire, and interface are normal.
6.1.3 LED Display Only Displays part of the Image
Frequently Asked
Question
LED Display only displays part of the image
Troubleshooting
Scale the Image
Push [Scale/Position] button in the processor and knob to adjust the actual
screen size of the screen, including “H Size”, “V Size”, “H Pos”, “V Pos” and
VSP 5360
User Manual
61
“Reset”. Push the knob to confirm.
6.1.4 No Display in the Second Half of LED Display
Frequently Asked
Question
No Display in the second half part of LED display
Troubleshooting
Resolution is Insufficient
Please make sure the points of the screen width and height, choose the
resolution to be bigger than screen width via push the [MENU] button to find
<OUTPUT FORMAT>, and push the knob to confirm.
6.1.5 All Key Lights are on Simultaneously
Frequently Asked
Question
All Key lights are on simultaneously
Troubleshooting
Check If Dial Switch is Normal
Shut the power, check if two red dial switches near CV are upward. Reboot if
they face down, and reboot. The function of the red dial switched is mainly
upgraded.
VSP 5360
User Manual
62
Chapter 6: Support
6.2 Contact Us
VSP 5360
User Manual
63
Chapter 7 Appendix
7.1 Specification
BNC Input
Number of Inputs
3
Supported Standards
PAL/NTSC
Signal Level
1Vpp±3db (0.7V Video+0.3v Sync ) 75 ohm
Multiplex
480i,576i
VGA DB15 Input
Number of Inputs
2
Connector
Standard DB15 Socket
Supported Standard
VGA-UXGA
Signal Level
R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v Sync ) 75
ohm
black level: 300mV Sync-tip: 0V
Supported Resolution
VGA-UXGA (800×[email protected] | 1024×[email protected] |
1280×[email protected] | 1440×[email protected] | 1600×[email protected])
DVI Input
Number of Outputs
3
Connector
Standard DVI-I socket
Supported Resolution
SMPTE:625/25/50 PAL | 525/29.97/59.94 NTSC,
1080P50/59.94/60 | 1080i50/59.94/60 | 720p50/59.94/60
VESA: 800×[email protected] | 1024×[email protected] | 1280×[email protected] |
1280×[email protected] | 1600×[email protected] | 1920×[email protected]
Signal Level
TMDS pwl, single pixel input,165MHz bandwidth
Format Standard
HDMI 1.3
DP (Displayport) Input
Number of Inputs
2
Connector
Standard
Supported Resolution
Support resolution: WQXGA + (1920 x 1200), and color depth:
30/36 bit (each primary 10/12 bit)
Supported Bandwidth
10.8Gb/s
Format Standard
DP1.1
3G-SDI Input
Number of Inputs
1
Connector
BNC
Data Rate
2.97Gb/s,
270Mb/s
Supported Standard
SMPTE 425M (Level A and Level B), SMPTE424M, SMPTE 292M,
SMPTE 259M-C and DVB-ASI
VSP 5360
2.97/1.001Gb/s,
User Manual
1.485Gb/s,
1.485/1.001Gb/s
and
64
Balance
Belden 1694A cable:
150m at 2.97Gb/s
250m at 1.485Gb/s
480m at 270Mb/s
SDI Loop Out
Number of Inputs
1
Connector
BNC
Data Rate
2.97Gb/s,
270Mb/s
Supported Standard
SMPTE 425M (Level A and Level B), SMPTE424M, SMPTE 292M,
SMPTE 259M-C and DVB-ASI
Balance
Belden 1694A cable:
150m at 2.97Gb/s
250m at 1.485Gb/s
480m at 270Mb/s
2.97/1.001Gb/s,
1.485Gb/s,
1.485/1.001Gb/s
and
DVI Output
Number of Outputs
2
Connector
Standard DVI-I Socket
Signal Level
TMDS pw, 165MHz bandwidth
Supported Resolution
SMPTE: 625/25/50 PAL | 525/29.97/59.94 NTSC,
1080P50/59.94/60 | 1080i50/59.94/60 | 720p50/59.94/60,
1280×720×23.98 | 1280×720×24 | 1280×[email protected] |
1280×[email protected] | 1280×[email protected] | 1920×[email protected] |
1920×[email protected] | 1920×[email protected] | 1920×[email protected] |
1920×[email protected]
VESA:
800×[email protected] | 1024×[email protected] | 1024×[email protected] | 1024×[email protected] |
1280×[email protected] | 1280×[email protected] | 1280×[email protected] | 1280×[email protected]
| 1360×[email protected] | 1366×[email protected] | 1400×[email protected] |
1440×[email protected] | 1600×[email protected] | 1680×[email protected] |
1920×[email protected] | 1920×[email protected] | 2048×[email protected] |
2560×[email protected]
VGA Output
Number of Outputs
2
Connector
Standard DB15 Socket
Supported Resolution
VESA:
800×[email protected] | 1024×[email protected] | 1024×[email protected] | 1024×[email protected] |
1280×[email protected] | 1280×[email protected] | 1280×[email protected] | 1280×[email protected]
| 1360×[email protected] | 1366×[email protected] | 1400×[email protected] |
1440×[email protected] | 1600×[email protected] | 1680×[email protected] |
1920×[email protected] | 1920×[email protected] | 2048×[email protected] |
2560×[email protected]
VSP 5360
User Manual
65
Signal Level
R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v Sync ) 75
ohm
black level: 300mV Sync-tip: 0V
VGA Input (Optional Module)
Interface Appearance
Board Size
93.8(L)×17(W)(mm)
Number of Inputs
2
Connector
Standard DB15 Socket
Supported Standard
VGA-UXGA
Signal Level
R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v Sync ) 75
ohm
black level: 300mV Sync-tip: 0V
Supported Resolution
VGA-UXGA (800×[email protected] | 1024×[email protected] | 1280×[email protected] |
1440×[email protected] | 1600×[email protected])
DVI Input (Optional Module)
Interface Appearance
Board Size
93.8(L)×17(W)(mm)
Number of Outputs
2
Connector
Standard DVI-I socket
Supported Resolution
SMPTE:625/25/50 PAL | 525/29.97/59.94 NTSC,
1080P50/59.94/60 | 1080i50/59.94/60 | 720p50/59.94/60
VESA:800×[email protected] | 1024×[email protected] | 1280×[email protected] |
1280×[email protected] | 1600×[email protected] | 1920×[email protected]
Signal Level
TMDS pwl, single pixel input,165MHz bandwidth
Format Standard
HDMI 1.3
SDI Input (Optional Module)
Interface Appearance
Board Size
93.8(L)×17(W)(mm)
SDI Input
Number of Inputs
2
Connector
BNC
Supported Standard
ITU-R BT.656,ITU-R BT.601,SMPTE 259M, SMPTE 292, SMPTE 297
Balance
Belden 1694A 100m self-adaptive
1.485G,350m self-adaptive 270Mbps
3G,200m
self-adaptive
SDI Loop Out
Number of Inputs
2
Connector
BNC
VSP 5360
User Manual
66
Signal Level
800mV±10%
Supported Standard
SMPTE:625/25 PAL | 525/29.97 NTSC | 625/50p PAL | 525/59.94p
NTSC | 720p50 | 720p59.94/60 | 1080i50 | 1080i59.94/60 |
1080p50/59.94/60
Balance
Belden 1694A 100m self-adaptive
1.485G,350m self-adaptive 270Mbps
3G,200m
self-adaptive
USB Input (Optional Module)
Interface Appearance
Board Size
93.8(L)×17(W)(mm)
Number of Inputs
2
Connector
Standard USB port
Supported Standard
Support general Image and video formats
HDMI Input (Optional Module)
Interface Appearance
Board Size
93.8(L)×17(W)(mm)
Number of Inputs
2
Connector
HDMI standard type A interface
Supported Resolution
SMPTE: 625/25/50 PAL | 525/29.97/59.94 NTSC |
1080P50/59.94/60 | 1080i50/59.94/60 |
720p50/59.94/60
VESA: 800×[email protected] | 1024×[email protected] | 1280×[email protected] |
1280×[email protected] | 1600×[email protected] | 1920×[email protected]
Embedded Audio Channels
Select one from the two inputs
Format Standard
HDMI 1.3
4K DP&HDM Input (Optional Module)
Interface Appearance
Board Size
93.8(L)×17(W)(mm)
DP Input
Number of Inputs
1
Connector
DisplayPort
Supported Resolution
VESA: 3840×2160×24 I 3840×2160×25 I 3840×2160×30
SMPTE: 625/25/50 PAL, 525/29.97/59.94 NTSC,
1080P50/59.94/60 I 1080i50/59.94/60,
720p50/59.94/60
Supported Bandwidth
21.6Gb/s
Format Standard
DP 1.2
DP Loop Out
VSP 5360
User Manual
67
Number of Loop Out
1
Connector
DisplayPort
Supported Resolution
VESA: 3840×2160×24 I 3840×2160×25 I 3840×2160×30
SMPTE: 625/25/50 PAL, 525/29.97/59.94 NTSC,
1080P50/59.94/60 I 1080i50/59.94/60,
720p50/59.94/60
Supported Bandwidth
21.6Gb/s
Format Standard
DP 1.2
HDMI Input
Number of Inputs
1
Connector
HDMI standard type A interface
Supported Resolution
VESA: 3840×2160×24 I 3840×2160×25 I 3840×2160×30
SMPTE: 625/25/50 PAL, 525/29.97/59.94 NTSC,
1080P50/59.94/60 I 1080i50/59.94/60,
720p50/59.94/60
Format Standard
HDMI 1.4
Function
Input channel configuration
Support each input channel signal programming configuration
Switch
Support any two inputs fade in fade out
Extras
Communication
RS232 USB UDP/IP
Power Supply
85-264V IEC-3
Working Environment
0°C~45°C
Stored Environment
10% to 90%
Product Warranty
3 years parts and labor warranty
VSP 5360
User Manual
68
Chapter 7: Appendix
7.2 Software Upgrade
If the version of VSP 5360 is older than V6.2.2R,need to upgrade the MCU repair file
VSP5360_V2.51R.MCU first.
Upgrade step (from left to right): Communication firmware core processing firmware.
1. Communication Firmware Upgrade
(1) Connect the device to PC via USB cable.
(2) Power on VSP 5360 and enter to USB upgrade function:
Steps: MENUSYSTEMUSB UPDATESEL.
(3) Open the USB disk which shown in PC, deleted file”firmware.bin”, then copy the file
VSP5360_V2.51R.MCU to USB disk.
(4) Restart the device after being upgraded, enter the Menu to check the version and factory
reset.
Step: MENUSYSTEMSYSTEM INFOCONT VER.
2. Core processing Firmware Upgrade
(1) Connect VSP 5360 to PC via USB/RS232 cable. (File format: “.bin”)
Click to open the software
(software will be included in the upgrade file.)
(2) Before starting to upgrade, check if computer can recognize the serial port or not, (If not,
please refer to the upgrade manual in upgrade tool kit shown as below). If the series port is
recognized, move to next step.
VSP 5360
User Manual
69
Chapter 7: Appendix
(3) Click
to configure the parameter like below:
(4) Select upgrade file as shown below, choose “ALL” and click “Upgrade”, like below:
VSP 5360
User Manual
70
Chapter 7: Appendix
(5) If all the upgrade firmwares show OK like below ,the upgrade is succeed.
(6) If some of upgrade firmwares failed, click and re-upgrade the failed files accordingly as shown
below:
(7) Power on VSP 5360 to view the version, step: MENUSYSTEMSYSTEM INFOCONT VER.
3. Version amendment description
Date
Version
20160819
V6.2.2R
VSP 5360
Amended Content
1. Add 3 pictures Preview controlled by CP 2048.
2. Change some Bugs.
User Manual
71
Chapter 7: Appendix
20160713
V6.2.1R
1. Add three pictures Preview feature.
2. Open two screen under the splicing model.
3. Add 4 working models in the Menu.
20150810
V6.2.0
1. Add “Preview” display.
2. Amend vertical mirror and 180 degrees rotation Feature.
3. Amend TP feature.
4. Add “Freeze” feature under “BLACK” key.
20150515
V5.2.0
1. Mapping parameter will be lose under DVI3 input mapping
if no signals.
2. Add output matrix feature.
20150211
V5.1.0
1. DVI3 input supports customized resolution.
2. Add CP 2048 control VSP 5360.
20150123
V5.0.1
1. Add fade in fade out feature under “Load” feature.
2. Change some bugs of Logo.
VSP 5360
User Manual
72
Chapter 7: Appendix
7.3 Installing Options
VSP 5162PRO, VSP 5360 and VSP 628PRO are based on module based structure, user can install
or replace the optional module according to actual need. The installation steps of VSP 5162PRO,
VSP 5360 and VSP 628PRO are the same. Here we take VSP 628PRO for example, specific steps
are as follows:
Install the Optional Module
1. Disconnect the power and all the signal and control cables.
2. Unscrew the 5 fixed screws on the top panel and remove the top panel (Figure 1):
(Figure 1)
3. Unscrew the 2 fixed screws on input optional module slot, and pull out the input block (Figure
2):
VSP 5360
User Manual
73
Chapter 7: Appendix
(Figure 2)
4. Push the input module into the input module slot, and fix it with 2 fixed screws (Figure 3):
VSP 5360
User Manual
74
Chapter 7: Appendix
(Figure 3)
5. Embed the input module block in the input module slot, and fix it with 2 fixed screws (Figure
4):
(Figure 4)
6. Assemble the top panel, and fix it with 5 fixed screws that removed in step 2, then optional
module installation is finished (Figure 5):
VSP 5360
User Manual
75
Chapter 7: Appendix
(Figure 5)
Note: Above instructions are only for input optional module. For VSP 628PRO, if user would
install the output optional module, first, take apart the top panel, and unscrew the 3 fixed screws
on sending card board to remove it (Figure 6).
(Figure 6)
Then unscrew the 2 fixed screws on output optional module, and pull out the output module
block (Figure 7).
(Figure 7)
Finally, push the output module into the output module slot, the install steps are the same as
step 4 to step 6 in “Install the Optional Module” part.
Note: There is the case that some customers connect the power cord of the sending card to the
F optional module, shown as Figure 8. This is not allowed to happen, or the F optional module
will be damaged.
VSP 5360
User Manual
76
Chapter 7: Appendix
(Figure 8)
Replace the Optional Module
The install steps for optional module replacement are the same as above, but the following need
to note:
1. Take apart the top panel, and unscrew the 2 fixed screws on input optional module to remove
it (Figure 9).
VSP 5360
User Manual
77
Chapter 7: Appendix
(Figure 9)
2. Unscrew the 2 fixed screws on input optional module, and pull out the input module block
(Figure 10).
(Figure 10)
3. Push the input module into the input module slot, the install steps are the same as step 4 to
step 6 in “Install the Optional Module” part.
Note: The install steps for output optional module replacement are the same as above.
VSP 5360
User Manual
78
Chapter 7: Appendix
7.4 Using the Serial Cable
Serial cable is used with selected RGBlink products to access remote commands via a serial
interface.
Following is the picture of the serial cable -- RJ11/DB9.
And connections are shown as follows:
VSP 5360
User Manual
79
Chapter 7: Appendix
7.5 Terms & Definitions
The following terms and definitions are used throughout this guide.
 “ASCII”: American Standard for Information Interchange. The standard code consisting of
7-bit coded characters (8 bits including parity check) used to exchange information
between data processing systems, data communication systems, and associated equipment.
The ASCII set contains control characters and graphic characters.
 “Aspect ratio”: The relationship of the horizontal dimension to the vertical dimension of an
image. In viewing screens, standard TV is 4:3, or 1.33:1; HDTV is 16:9, or 1.78:1. Sometimes
the “:1” is implicit, making TV = 1.33 and HDTV = 1.78.
 “AV”: Audio visual, or audio video.
 A “Background” is an unscaled source, typically originating from a computer. A background
source appears at the system’s lowest priority — visually in back of all other sources.
 “Baudrate”: Named of J.M.E. Baudot, the inventor of the Baudot telegraph code. The
number of the electrical oscillations per second, called baud rate. Related to, but not the
same as, transfer rate in bits per second (bps).
 “Blackburst”: The video waveform without the video elements. It includes the vertical sync,
horizontal sync, and the chroma burst information. Blackburst is used to synchronize video
equipment to align the video output. One signal is normally used to set up an entire video
system or facility. Sometimes it is called House sync.
 “BNC”: Bayonet Neill-Concelman. A cable connector used extensively in television and
named for its inventors. A cylindrical bayonet connector that operates with a twist-locking
motion. To make the connection, align the two curved grooves in the collar of the male
connector with the two projections on the outside of the female collar, push, and twist.
This allows the connector to lock into place without tools.
 “Brightness”: Usually refers to the amount or intensity of video light produced on a screen
without regard to color. Sometimes called “black level.
 “CAT 5”: Category 5. Describes the network cabling standard that consists of four
unshielded twisted pairs of copper wire terminated by RJ-45 connectors. CAT 5 cabling
supports data rates up to 100 Mbps. CAT 5 is based on the EIA/TIA 568 Commercial
Building Telecommunications Wiring Standard.
 “Color bars”: A standard test pattern of several basic colors (white, yellow, cyan, green,
magenta, red, blue, and black) as a reference for system alignment and testing. In NTSC
video, the most commonly used color bars are the SMPTE standard color bars. In PAL video,
the most commonly used color bars are eight full field bars. In the computer, the most
commonly used color bars are two rows of reversed color bars.
 “Color burst”: In color TV systems, a burst of subcarrier frequency located on the back
porch of the composite video signal. This serves as a color synchronizing signal to establish
a frequency and phase reference for the chroma signal. Color burst is 3.58 MHz for NTSC
and 4.43 MHz for PAL.
 “Color temperature”: The color quality, expressed in degrees Kelvin(K), of a light source.
The higher the color temperature, the bluer the light. The lower the temperature, the
VSP 5360
User Manual
80
Chapter 7: Appendix










redder the light. Benchmark color temperature for the A/V industry include 5000°K, 6500°K,
and 9000°K.
“Contrast ratio”: The radio of the high light output level divided by the low light output level.
In theory, the contrast radio of the television system should be at least 100:1, if not 300:1.
In reality, there are several limitations. In the CRT, light from adjacent elements
contaminate the area of each element. Room ambient light will contaminate the light
emitted from the CRT. Well-controlled viewing conditions should yield a practical contrast
ratio of 30:1 to 50:1.
“DVI”: Digital Visual Interface. The digital video connectivity standard that was developed by
DDWG (Digital Display Work Group). This connection standard offers two different
connectors: one with 24 pins that handles digital video signals only, and one with 29 pins
that handles both digital and analog video.
“EDID”: Extended Display Identification Data – EDID is a data structure used to communicate
video display information, including native resolution and vertical interval refresh rate
requirements, to a source device. The source device will then output the optimal video
format for the display based on the provided EDID data, ensuring proper video image
quality. This communication takes place over the DDC – Display Data Channel.
“Ethernet”: A Local Area Network (LAN) standard officially known as IEEE 802.3. Ethernet
and other LAN technologies are used for interconnecting computers, printers, workstations,
terminals, servers, etc. within the same building or campus. Ethernet operates over twisted
pair and over coaxial cable at speeds starting at 10Mbps. For LAN interconnectivity,
Ethernet is physical link and data link protocol reflecting the two lowest layers of the OSI
Reference Model.
“Frame”: In interlaced video, a frame is one complete picture. A video frame is made up of
two fields, or two sets of interlaced lines. In a film, a frame is one still picture of a series
that makes up a motion picture.
“Gamma”: The light output of a CRT is not linear with respect to the voltage input. The
difference between what you should have and what is actually output is known as gamma.
“HDMI” - High – Definition Multimedia Interface: An interface used primarily in consumer
electronics for the transmission of uncompressed high definition video, up to 8 channels of
audio, and control signals, over a single cable. HDMI is the de facto standard for HDTV
displays, Blu-ray Disc players, and other HDTV electronics. Introduced in 2003, the HDMI
specification has gone through several revisions.
“HDSDI”: The high-definition version of SDI specified in SMPTE-292M. This signal standard
transmits audio and video with 10 bit depth and 4:2:2 color quantization over a single
coaxial cable with a data rate of 1.485 Gbit/second. Multiple video resolutions exists
including progressive 1280x720 and interlaced 1920x1080 resolution. Up to 32 audio
signals are carried in the ancillary data.
“JPEG” (Joint photographic Expects Group): Commonly used method of lossy compression
for photographic images using a discreet cosine transfer function. The degree of
compression can be adjusted, allowing a selectable tradeoff between storage size and
image quality. JPEG typically achieves 10:1 compression with little perceptible loss in image
quality. Produces blocking artifacts.
“MPEG”: Motion Picture Expect Group. A standard committee under the auspices of the
VSP 5360
User Manual
81
Chapter 7: Appendix









International Standards Organization working on algorithm standards that allow digital
compression, storage and transmission of moving image information such as motion video,
CD-quality audio, and control data at CD-ROM bandwidth. The MPEG algorithm provides
inter-frame compression of video images and can have an effective compression rate of
100:1 to 200:1.
“NTSC”: The color video standard used in North America and some other parts of the world
created by the National Television Standards Committee in the 1950s. A color signal must
be compatible with black-and-white TV sets. NTSC utilizes an interlaced video signals, 525
lines of resolution with a refresh rate of 60 fields per second (60 Hz). Each frame is
comprised of two fields of 262.5 lines each, running at an effective rate of 30 frames per
second.
“Operator”: Refers to the person who uses the system.
“PAL”: Phase Alternate Line. A television standard in which the phase of the color carrier is
alternated from line to line. It takes four full pictures (8 fields) for the color-to-horizontal
phase relationship to return to the reference point. This alternation helps cancel out phase
errors. For this reason, the hue control is not needed on a PAL TV set. PAL, in many
transmission forms, is widely used in Western Europe, Australia, Africa, the Middle East,
and Micronesia. PAL uses 625-line, 50-filed (25 fps) composite color transmission system.
“PIP”: Picture-in-Picture. A small picture within a larger picture created by scaling down one
of the images to make it smaller. Each picture requires a separate video source such as a
camera, VCR, or computer. Other forms of PIP displays include Picture-by-Picture (PBP)
and Picture-with-Picture (PWP), which are commonly used with 16:9 aspect display devices.
PBP and PWP image formats require a separate scaler for each video window.
“Polarity”: The positive and negative orientation of a signal. Polarity usually refers to the
direction or a level with respect to a reference (e.g. positive sync polarity means that sync
occurs when the signal is going in the positive direction).
“RJ-45”: Registered Jack-45. A connector similar to a telephone connector that holds up to
eight wires, used for connecting Ethernet devices.
“RS-232”: An Electronic Industries Association (EIA) serial digital interface standard
specifying the characteristics of the communication path between two devices using either
DB-9 or DB-25 connectors. This standard is used for relatively short-range communication
and does not specify balanced control lines. RS-232 is a serial control standard with a set
number of conductors, data rate, word length, and type of connector to be used. The
standard specifies component connection standards with regard to the computer interface.
It is also called RS-232-C, which is the third version of the RS-232 standard, and is
functionally identical to the CCITT V.24 standard.
“Saturation”: Chroma, chroma gain. The intensity of the color, or the extent to which a given
color in any image is free from white. The less white in a color, the truer the color or the
greater its saturation. On a display device, the color control adjusts the saturation. Not to
be confused with the brightness, saturation is the amount of pigment in a color, and not
the intensity. Low saturation is like adding white to the color. For example, a low-saturated
red looks pink.
“Scaling”: A conversion of a video or computer graphic signal from a starting resolution to a
new resolution. Scaling from one resolution to another is typically done to optimize the
VSP 5360
User Manual
82
Chapter 7: Appendix











signal for input to an image processor, transmission path or to improve its quality when
presented on a particular display.
“SDI”: Serial Digital Interface. The standard based on a 270 Mbps transfer rate. This is a
10-bit, scrambled, polarity independent interface with common scrambling for both
component ITU-R 601 and composite digital video and four channels of (embedded) digital
audio.
“Seamless Switching”: A feature found on many video switchers. This feature causes the
switcher to wait until the vertical interval to switch. This avoid a glitch (temporary
scrambling) which normally is seen when switching between sources.
“SMPTE”: Society of Motion Picture and Television Engineers. A global organization, based in
the United States, that sets standards for baseband visual communications. This includes
film as well as video and television standards.
“S-Video”: A composite video signal separated into the luma (“Y” is for luma, or black and
white information; brightness) and the chroma (“C” is an abbreviation for chroma, or color
information).
“Sync”: Synchronization. In video, sync is a means of controlling the timing of an event with
respect to other events. This is accomplished with timing pulses to insure that each step in
a process occurs at the correct time. For example, horizontal sync determines exactly when
to begin each horizontal scan line. Vertical sync determines when the image is to be
refreshed to start a new field or frame. There are many other types of sync in video
system.(Also known as “sync signal” or “sync pulse.”)
“TCP/IP”: Transmission Control Protocol/Internet Protocol. The communication protocol of
the Internet. Computers and devices with direct access to the Internet are provided with a
copy of the TCP/IP program to allow them to send and receive information in an
understandable form.
“USB”: Universal Serial Bus. USB was developed by seven PC and telecom industry leaders
(Compaq, DEC, IBM, Intel, Microsoft, NEC, and Northern Telecom). The goal was easy
plug-and-play expansion outside the box, requiring no additional circuit cards. Up to 127
external computer devices may be added through a USB hub, which may be conveniently
located in a keyboard or monitor. USB devices can be attached or detached without
removing computer power. The number of devices being designed for USB continues to
grow, from keyboards, mice, and printers to scanners, digital cameras, and ZIP drives.
“VESA”: Video Electronics Standards Association. A nonprofit number organization
dedicated to facilitating and promoting personal computer graphics through improved
standards for the benefit of the end-user. www.vesa.org
“VGA”: Video Graphics Array. Introduced by IBM in 1987, VGA is an analog signal with TTL
level separate horizontal and vertical sync. The video outputs to a 15-pin HD connector and
has a horizontal scan frequency of 31.5 kHz and vertical frequency of 70 Hz (Mode 1, 2)
and 60 Hz (Mode 3). The signal is non-interlaced in modes 1, 2, and 3 and interlaced when
using the 8514/A card (35.5 kHz, 86 Hz) in mode 4. It has a pixel by line resolution of
640×480 with a color palette of 16 bits and 256,000 colors.
“YCrCb”: Used to describe the color space for interlaced component video.
“YPbPr”: Used to describe the color space for progressive-scan (non-interlaced) component
video.
VSP 5360
User Manual
83
Chapter 7: Appendix
7.6 Revision History
The table below lists the changes to the Video Processor User Manual.
Format
Time
V1.0
2013-12-17
0000#
Release.
Vira
V1.1
2014-03-07
0001#
1. Update the front panel.
2. Update the menu.
Vira
V1.2
2014-10-28
0002#
1. Update the menu.
2. Add the windows control program.
Vira
V1.3
2015-07-17
0003#
Add “Optional Module Installation
and Replacement Instruction”
Vira
V1.4
2015-09-21
0004#
1. Add the HDMI input optional
module.
2. Update the menu.
Vira
V1.5
2016-09-09
0005#
1. Update the style and structure of
the user manual.
2. Update the back panel.
3. Update the dimension.
4, Update the menu.
5. Add “3 Screen Preview Setting”
and “User Define DSK Key”.
6. Update “Software Upgrade”.
7. Update the specification.
Vira
V1.6
2016-11-01
0006#
1. Add the description of the audio
interface.
2. Add “Using the Serial Cable.”
Vira
VSP 5360
ECO#
Description
User Manual
Principal
84
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement