Bosch KAD92AI20G Inox-easyclean 175.6 x 91.2 cm American side by side Serie | 6 Instructions for use

Add to my manuals
30 Pages

advertisement

Bosch KAD92AI20G Inox-easyclean 175.6 x 91.2 cm American side by side Serie | 6 Instructions for use | Manualzz

Fridge-freezer

KAD..

en

Installation instructions and instructions for useFridge-freezer 2

en en Table of contents

Installation instructions and instructions for useFridge-freezer

Safety instructions ................................................ 3

Information concerning disposal ....................... 4

Scope of delivery .................................................. 4

Installing the appliance ....................................... 5

Installation dimensions ........................................ 5

Door opening angle ............................................. 6

Aligning the appliance ......................................... 7

Connecting the appliance ................................... 7

Removing appliance doors and handles ......... 8

Getting to know your appliance ........................ 9

Switching on the appliance ............................. 11

Setting the temperature unit ............................ 11

Setting the temperature .................................... 11

Special functions ............................................... 11

Home Connect .................................................. 13

Sabbatical mode ............................................... 15

Alarm function .................................................... 16

Usable capacity ................................................. 16

Freezer compartment ....................................... 16

Max. freezing capacity ...................................... 16

Freezing fresh food ........................................... 17

Super freezing .................................................... 17

Thawing frozen food ......................................... 18

Refrigerator compartment ............................... 18

Super cooling ..................................................... 19

Ice and water dispenser .................................. 19

Water filter ........................................................... 21

Specification and performance

data sheet ........................................................... 22

Features of the freezer compartment ............ 23

Variable interior design .................................... 23

Switching off and disconnecting

the appliance ..................................................... 24

Defrosting ........................................................... 24

Cleaning the appliance .................................... 24

Light (LED) .......................................................... 26

Tips for saving energy ...................................... 26

Operating noises ............................................... 26

Eliminating minor faults yourself ..................... 27

Appliance self-test ............................................. 29

Customer service .............................................. 29

2

m

Safety instructions

Safety instructions

This appliance complies with the relevant safety regulations for electrical appliances and is fitted with noise suppression.

The refrigeration circuit has been checked for leaks.

About these instructions

Read and follow the operating and installation instructions. They contain important information on how to install, use and maintain the appliance.

The manufacturer is not liable if you disregard the instructions and warnings in the operating and installation instructions.

Retain all documents for subsequent use or for the next owner.

Risk of explosion

Never use electric appliances inside the appliance (e.g. heaters or electric ice makers).

Do not store products which contain flammable propellant (e.g. spray cans) or explosive substances in the appliance.

Store high-percentage alcohol tightly sealed and in an upright position.

Do not use additional means to accelerate the defrosting process other than those recommended by the manufacturer.

Risk of electric shock

Improper installations and repairs may put the user at considerable risk.

When installing the appliance, ensure that the mains cable is not trapped or damaged.

If the mains cable is damaged: immediately disconnect the appliance from the electricity supply.

Do not use multiple sockets, extension leads or adapters.

Have the appliance repaired by the manufacturer, Customer Service or a similarly qualified person only.

Use original parts supplied by the manufacturer only.

The manufacturer guarantees that these parts satisfy the safety requirements.

en

Risk of cold burns

Never put frozen food straight from the freezer compartment into your mouth.

Avoid prolonged contact of skin with frozen food, ice and the tubes in the freezer compartment.

Risk of injury

Containers which contain carbonated drinks may burst.

Do not store containers which contain carbonated drinks in the freezer compartment.

Fire hazard/Danger due to refrigerants

The tubes of the refrigeration circuit convey a small quantity of an environmentally friendly but flammable refrigerant (R600a).

It does not damage the ozone layer and does not contribute to the greenhouse effect. If refrigerant escapes, it may injure your eyes or ignite.

Do not damage the tubes.

If the tubes are damaged:

Keep naked flames and ignition sources away from the appliance.

Ventilate the room.

Switch off the appliance and pull out the mains plug.

Please contact Customer Service.

Fire hazard

Portable multiple outlets or power supplies may overheat, causing a fire.

Never leave portable multiple outlets or portable power supplies behind the appliance.

3

en

Avoiding placing children and vulnerable people at risk

At risk are:

Children,

People who have limited physical, mental or sensory abilities,

People who have inadequate knowledge concerning safe operation of the appliance.

Measures:

Ensure that children and vulnerable people have understood the hazards.

Children or vulnerable people must be supervised by a responsible person when using the appliance.

Only children from 8 years and above may use the appliance.

Supervise children while the appliance is being cleaned or maintained.

Never allow children to play with the appliance.

Risk of suffocation

If the appliance features a lock: keep the key out of the reach of children.

Keep children away from the packaging and its parts.

Damage

To prevent damage:

Do not stand or support yourself on the base, runners or doors.

Keep plastic parts and door seals free of oil and grease.

Pull the mains plug – not the power cord.

Weight

The appliance is very heavy. The appliance should always be transported and set up by at least 2 persons.

Information concerning disposal

*

Disposal of packaging

The packaging protects your appliance from damage during transit. All utilised materials are environmentally safe and recyclable. Please help us by disposing of the packaging in an environmentally friendly manner.

Please ask your dealer or inquire at your local authority about current means of disposal.

*

Disposal of your old appliance

Old appliances are not worthless rubbish! Valuable raw materials can be reclaimed by recycling old appliances.

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

m

Warning

Redundant appliances

1. Pull out the mains plug.

2. Cut off the power cord and discard with the mains plug.

3. Do not take out the trays and receptacles: children are therefore prevented from climbing in!

4. Do not allow children to play with the appliance once it has spent its useful life. Danger of suffocation!

Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally. Ensure that tubing of the refrigerant circuit is not damaged prior to proper disposal.

Scope of delivery

After unpacking all parts, check for any damage in transit.

If you have any complaints, please contact the dealer from whom you purchased the appliance or our customer service.

The delivery consists of the following parts:

Free-standing appliance

Interior fittings (depending on model)

Bag containing installation materials

Operating instructions

Installation manual

Customer service booklet

Warranty enclosure

Information on the energy consumption and noises

4

Installing the appliance

Transporting

The appliance is heavy. Secure in position during transportation and installation.

Due to the weight/dimensions of the appliance and to minimise the risk of injury and damage to the appliance at least two persons are necessary to set-up the appliance safely.

Installation location

Install the appliance in a dry, well ventilated room.

The installation location should neither be exposed to direct sunlight nor near a heat source, e.g. a cooker, radiator, etc. If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances to a heat source:

3 cm to electric or gas cookers.

30 cm to an oil or coal-fired cooker.

If installing the appliance next to another refrigerator or freezer, ensure a minimum lateral distance of 25 mm to prevent the formation of condensation.

If a panel or cupboard is installed above the appliance, ensure that a gap of 30 mm is left so that the appliance can be pulled out of the recess if required.

The air heated on the rear side of the appliance must be allowed to escape unhindered.

Subsurface

m

Caution

The appliance is very heavy.

The weight of the appliance may be up to 165 kg depending on the model.

The floor of the installation location must not give way; if required, reinforce floor.

To ensure that the doors can open all the way, observe lateral minimum distances when installing the appliance in a corner or recess (see chapter

“Installation dimensions”).

If the depth of the adjacent kitchen equipment is more than 60 cm, observe lateral minimum distances in order to utilise the full door opening angle (see chapter “Door opening angle“).

Observe ambient temperature and ventilation

Ambient temperature

The climate class can be found on the rating plate.

The climate class indicates within which ambient temperatures the appliance can be operated.

The rating plate is located in the refrigerator compartment at the right side.

Climate class

SN

N

ST

T

Permitted ambient temperature

+10 °C to 32 °C

+16 °C to 32 °C

+16 °C to 38 °C

+16 °C to 43 °C

en

Note

The appliance is fully functional within the room temperature limits of the indicated climatic class. If an appliance of climatic class SN is operated at colder room temperatures, the appliance will not be damaged up to a temperature of +5 °C.

Ventilation

Never cover the ventilation openings on the rear of the appliance. Conduction of the heated air must not be obstructed. Otherwise, the refrigeration unit must work harder. This increases power consumption.

Place the enclosed spacers in the designated holders on the back of the appliance. This ensures that there is a minimum distance between the appliance and the wall.

Installation dimensions

5

en

Door opening angle

6

Aligning the appliance

To ensure that the appliance functions correctly, it must be set level with a spirit level.

If the appliance is not level, water may flow out of the ice maker, ice cubes may be irregular or the doors may not close properly.

Connecting the appliance

Have a technician install and connect the appliance according to the enclosed installation instructions.

Do not remove the transportation protection devices from the shelves and storage compartments until the appliance has been installed.

Always connect the water before the power.

Apart from statutory national regulations, you should stick to the connection terms relating to the local electricity and water companies.

After installing the appliance, wait at least 1 hour until the appliance starts up. During transportation the oil in the compressor may have flowed into the refrigeration system.

Before switching on the appliance for the first time, clean the interior of the appliance (see chapter

“Cleaning the appliance”).

en

Water connection

The water may be connected only by a competent fitter according to the local regulations of the appropriate water supply company.

m

Caution

Use only the enclosed hose set for connection to the drinking water mains. Do not use existing or already used hose sets.

Connect the appliance to a drinking water line only:

Minimum pressure: 0.2 Mpa (2 bar)

Maximum pressure: 0.8 Mpa (8 bar)

Pressure over 0.8 MPa (8 bar): install a pressure limiter between drinking water connection and hose set

Note

The maximum outside diameter of the water mains

(without connecting pieces) is 10 mm.

Electrical connection

m

Warning

Risk of electric shock!

If the length of the mains cable is inadequate, never use multiple sockets or extension leads. Instead, please contact Customer Service for alternatives.

The appliance must be connected to a permanently installed socket.

The socket must be near the appliance and also freely accessible following installation of the appliance.

The appliance complies with protection class I. Connect the appliance to 220–240 V/50 Hz alternating current via a correctly installed socket with protective conductor. The socket must be protected by a 10 A to

16 A fuse or higher.

For appliances operated in non-European countries, check whether the indicated voltage and current type match the values of your electricity supply. The rating plate is situated in the bottom right-hand side of the appliance. The mains cable may be replaced by a technician only.

m

Warning

Never connect the appliance to electronic energy saver plugs.

Our appliances can be used with mains and sinecontrolled inverters. Mains-controlled inverters are used for photovoltaic systems which are connected directly to the national grid. Sine-controlled inverters must be used for isolated applications (e.g. on ships or in mountain lodges) which are not connected directly to the national grid.

7

en

Removing appliance doors and handles

If the appliance will not fit through the house door, the appliance doors and handles can be unscrewed.

m

Caution

Only customer service may unscrew the appliance doors.

8

Getting to know your appliance

These operating instructions refer to several models. The diagrams may differ.

en

* Not all models.

A

B

Freezer compartment

Refrigerator compartment

4

5

6

2

3

1 Light switch for refrigerator and freezer compartments

Control and display panel

Door shelf

Ice maker/Ice cube container

Air outlet opening

Ice and water dispenser

7

8

Freezer calendar

Glass shelf in the freezer compartment

9 Door shelf

10 Frozen food container

11 Door shelf (2 star compartment) for short-term storage of food and ice cream

12 Light

13 Particle filter/Water filter

14 Butter and cheese compartment

15 Air outlet opening

16 Bottle shelf *

17 Adjustable glass shelf

18 Glass shelf in the refrigerator compartment

19 “Cool-fresh” container

20 Shelf for large bottles

21 Vegetable container with humidity control

22 Height-adjustable feet

9

en

Control and display panel

The display panel and display panel on the door consists of a touch pad.

Touch the keypad to actuate the corresponding function.

1

2

3

4

5

6

7

“options” button

For selecting the special functions. Keep pressing the button until the required function is selected with an arrow (see chapter entitled

“Special functions”).

“select” button

For making settings in the different temperature zones (freezer compartment, refrigerator compartment). Keep pressing the button until the required zone is marked with an arrow.

Freezer compartment display

Indicates the current temperature setting in the freezer compartment.

Time display

Displays the current time or the time sequence when a special function of the timer is activated.

Special functions display

Indicates the available special functions (see chapter “Special functions”).

Refrigerator compartment display

Indicates the current temperature setting in the refrigerator compartment.

Super button

This button is used to switch on the super cooling (refrigerator compartment) or super freezing (freezer compartment) functions (see chapter entitled “Super cooling” or “Super freezing”).

8

“alarm off/lock” button

The button is used to

9

■ switch off the warning signal (see chapter

“Alarm function”), switch the button lock on and off.

To switch the button lock on and off, press button for 5 seconds. When the function is switched on, “lock” is indicated on the display panel.

Setting buttons +/–

The buttons are used to

■ set the temperatures in the different cooling zones, switch the special functions on and off,

■ change the time setting of the “timer” special function.

10

On/Off “light” button for ice and water dispenser

11

Ice dispenser button

12

Dispenser button for crushed ice

13

Water dispenser button

10

Switching on the appliance

When connected, the appliance is switched on. A warning signal sounds.

Press the “alarm off/lock” button. The warning signal switches off.

Display “alarm” goes out when the appliance has reached the set temperature.

Note

Do not make any further settings on the appliance within the first 30 seconds after switching on.

The preset temperatures are reached after several hours. Do not put any food in the appliance beforehand.

The factory has recommended the following temperatures:

Freezer compartment: -18 °C

Refrigerator compartment: +4 °C

Setting the temperature unit

The temperature can be displayed in degrees Celsius

(°C) or degrees Fahrenheit (°F).

Setting the temperature unit

To set the temperature unit, simultaneously press the

“super” button and the “options” button for 5 seconds.

Depending on the previous setting, the display switches to the other temperature unit.

Setting the temperature

The required area must be selected before temperatures can be set for the different climatic zones

(refrigerator compartment, freezer compartment):

1. Keep pressing the “select” button until the required climatic zone is marked with an arrow.

2. Set the temperature with the + (warmer) or - (cooler) setting buttons.

The value last indicated is saved by the system.

Freezer compartment

The freezer compartment can be set from -16 °C to

-24 °C.

We recommend a setting of -18 °C.

en

Refrigerator compartment

The refrigerator compartment can be set from +2 °C to +8 °C.

The temperature can be set at 1 °C intervals.

Perishable food should not be stored above +4 °C.

We recommend a setting of +4 °C.

Special functions

[timer]

You can use this function to set a period of time of 0-

99 minutes. A signal reminds you, e.g. when food is to be taken out of the compartment after a certain time.

A value of 20 minutes has been preset at the factory.

m

Caution

Drinks bottles may crack if they are stored for longer than 20 minutes in the freezer compartment.

Switching on [timer]

1. Keep the Options button pressed until the [timer] function is marked with an arrow.

2. Activate by pressing the setting button + or -

(function is framed).

3. Press the setting buttons +/- to set the desired time.

Note

Repeatedly press the button to change the time in one-minute intervals. If the button is held down, the time changes in 3-minute intervals.

4. Press the Options button to start the time cycle.

Switching off [timer]

To deactivate the function, simultaenously press the setting buttons + and - for 3 seconds.

11

en

[eco]

This function switches the appliance to energy-saving mode.

The appliance automatically sets the following temperatures:

Freezer compartment: : -16 °C

Refrigerator compartment: +6 °C

Switching on the [eco]

1. Keep pressing the “options” button, until the [eco] function is marked with an arrow.

2. Activate by pressing the setting button + (function is framed).

Switching off the [eco]

1. Keep pressing the “options” button, until the [eco] function is marked with an arrow.

2. Deactivate by pressing the setting button - (function is no longer framed).

[vacation]

If leaving the appliance for a long period of time, you can switch the appliance over to the energy-saving vacation mode. The refrigerator compartment temperature is automatically switched to +14 °C.

m

Caution

Do not store any food in the refrigerator compartment during this time!

Switching on the [vacation]

1. Keep pressing the “options” button, until the [vacation] function is marked with an arrow.

2. Activate by pressing the setting button + (function is framed).

Switching off the [vacation]

1. Keep pressing the “options” button, until the [vacation] function is marked with an arrow.

2. Deactivate by pressing the setting button - (function is no longer framed).

[clock]

The time is indicated on the time display panel. You can set the time with the [clock] function.

Setting the time

1. Keep pressing the “options” button, until the [clock] function is marked with an arrow.

2. Activate by pressing the setting button + (function is framed).

3. Press the setting buttons +/- to set the required time.

4. Save the set time with the “options” button.

Note

If the [timer] function is switched on, the time is not displayed.

[IWD off]

You can use this function to switch off the ice and water dispenser.

■ m

Caution

Before switching off the ice maker, it is most important that you switch the water supply to the appliance off for a few hours.

Empty and clean ice cube container. Re-attach the ice cube container. Ensure that the ice cube container engages with the support.

Switching on [IWD off]

1. Keep pressing the “options” button, until the [IWD off] function is marked with an arrow.

2. Activate by pressing the setting button + (function is framed).

Switching off [IWD off]

1. Keep pressing the “options” button, until the [IWD off] function is marked with an arrow.

2. Deactivate by pressing the setting button - (function is no longer framed).

[filter change]

After 6 months you are prompted via the [filter change] display message to replace the filter cartridge.

Activating new filter cartridge

When the filter cartridge has been replaced, the [filter change] function must be re-activated.

1. Change filter cartridge (see chapter “Water filter”).

2. Keep pressing the “options” button, until the [filter change] function is marked with an arrow.

3. Activate by pressing the setting buttons +/-. [filter change] display goes out.

12

Home Connect

This appliance is Wi-Fi-capable and can be remotely controlled using a mobile device.

Note

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

In the following cases, the appliance functions like a refrigerator without a network connection and can still be manually operated via the controls:

The appliance is not connected to a home network.

Home Connect service is not available in the country in which the appliance is set up. For an overview of the countries in which Home Connect is available, see www.home-connect.com.

In order to use the Home Connect functions, connect the appliance to a Home Connect Wi-Fi dongle.

If a Home Connect Wi-Fi dongle is not supplied with your appliance, you can order one from customer service.

Note

Connection and disconnection of the appliance plug may be more difficult than expected.

Attach the Wi-Fi dongle at a height of one metre.

Notes

Please observe the safety information in these operating instructions and ensure that this is still observed even if you operate the appliance via the

Home Connect app and are not at home when doing so.

You must also follow the instructions in the Home

Connect app.

If the appliance is being operated using the controls on the appliance itself, this mode always has priority.

During this time, it is not possible to operate the appliance using the Home Connect app.

Setting up Home Connect

Notes

Observe the Home Connect supplementary sheet, which is available for download under http:// www.bosch-home.com with the instructions. To do so, enter the E-number of your appliance in the search field.

After switching on the appliance, wait at least two minutes until internal device initialisation is complete.

Only then start setting up Home Connect.

To implement settings with Home Connect, you must have installed the Home Connect app on your mobile device. Observe the supplied Home Connect documents for this. Follow the steps specified by the app to implement the settings.

The Home Connect menu will close automatically when the appliance is not operated for a lengthy period of time. You can find information on how to open the Home Connect menu at the start of the appropriate sections.

en

Automatic connection with the home network (WLAN)

If a WLAN router with WPS function is available, the refrigerator can automatically connect to the home network.

1. Press the Options button and the Alarm off/lock button simultaneously.

"

Cn

" is shown in the freezer compartment display.

Note

Press both buttons simultaneously. The button operation is locked if only the Alarm off/lock button is pressed for an excessively long period.

2. Keep pressing the Options button until "

AC

" is shown in the freezer compartment display and "

OF

" is shown in the refrigerator compartment display.

3. Press the adjustment button

+

.

The appliance is ready for the automatic connection.

An animation is shown in the refrigerator compartment display for 2 minutes.

The appliance is ready for the automatic connection for as long as the animation is displayed.

4. Within those 2 minutes, activate the WPS function on the home network router (e.g. using the WPS/WLAN button; observe information on this topic in the router documentation).

If the connection is successful, "

On

" flashes in the refrigerator compartment display.

The refrigerator is ready to connect with the app.

Note

If "

OF

" is shown in the refrigerator compartment display, it was not possible to establish a connection.

1. Check whether the refrigerator is located within the range of the home network (WLAN).

2. Repeat the process or establish the connection manually.

Manual connection with the home network (WLAN)

If the WLAN router present does not have a WPS function, or if this is unknown, you can manually connect the refrigerator with the home network.

1. Press the Options button and the Alarm off/lock button simultaneously.

"

Cn

" is shown in the freezer compartment display.

Note

Press both buttons simultaneously. The button operation is locked if only the Alarm off/lock button is pressed for an excessively long period.

2. Keep pressing the Options button until "

SA

" is shown in the freezer compartment display and "

OF

" is shown in the refrigerator compartment display.

3. Press the adjustment button

+

.

The appliance is ready for the manual connection.

An animation is shown in the refrigerator compartment display.

The appliance is ready for the manual connection for as long as the animation is displayed.

4. The refrigerator has now set up its own WLAN network with the network name "

HomeConnect

".

You can now access this network with your mobile device.

13

en

5. Call up the WLAN settings in the settings menu of the mobile device.

6. Connect the mobile device with the WLAN network

"

HomeConnect

".

Password: "

HomeConnect

"

It can take up to 60 seconds to establish the connection.

7. After successfully connecting, open the Home

Connect app on the mobile device.

The app will search for the refrigerator.

8. As soon as the refrigerator has been found, enter the network name "

SSID

" and the password "

Key

" of your own home network (WLAN) into the corresponding fields.

9. Confirm with the button

Transfer to household appliance

.

If the connection is successful, "

On

" flashes in the refrigerator compartment display.

You can now connect the refrigerator with the app.

If "

OF

" is shown in the refrigerator compartment display, it was not possible to establish a connection.

Check whether the refrigerator is located within the range of the home network (WLAN).

Repeat the process.

Connecting your refrigerator to the Home Connect app

1. Once the connection between the refrigerator and the home network has been established, press

Options button and Alarm off/lock button at the same time.

"

Cn

” is shown in the freezer compartment display.

Note

Press both buttons simultaneously. Button operation is locked if only the Alarm off/lock button is pressed for too long.

2. Keep pressing Options button until "

PA

" is shown in the freezer compartment display and "

OF

" in the refrigerator compartment display.

3. Press

+

adjustment button to connect the appliance to the app.

An animation is shown in the refrigerator compartment display.

As soon as the refrigerator and the app are connected, the refrigerator compartment display shows "

On

".

4. Open the app and wait until the refrigerator is displayed.

Use

Add

to confirm the connection between the app and the refrigerator.

If the refrigerator is not automatically displayed, click on

Add appliance

in the app and follow the instructions. As soon as your refrigerator is displayed, add it with

+

.

5. Follow the instructions in the app until the process is complete.

The freezer compartment display shows "

PA

" and the refrigerator compartment display "

On

".

The refrigerator has been connected to the app.

If the connection has failed, please check whether the mobile device is connected to the home network

(WLAN).

Then try to establish the connection again.

If "

Er

" appears on the refrigerator compartment display, reset the Home Connect settings.

Note

On reset, all Home Connect settings are reset.

Resetting Home Connect settings

If there is a problem when trying to establish a connection or if you would like to register the appliance in a different home network (WLAN), the Home Connect settings can be reset:

1. Press the Options button and the Alarm off/lock button simultaneously.

"

Cn

" is shown in the freezer compartment display.

Note

Press both buttons simultaneously. The button operation is locked if only the Alarm off/lock button is pressed for an excessively long period.

2. Keep pressing the Options button until "

rE

" is shown in the freezer compartment display and "

OF

" is shown in the refrigerator compartment display.

3. Press the adjustment button

+

.

An animation is shown in the refrigerator compartment display for 15 seconds.

"

OF

" is subsequently shown in the refrigerator compartment display.

The Home Connect settings have been reset.

Installing the Home Connect software update

The refrigerator checks for updates to the Home

Connect software at regular intervals.

If an update is available, "

UP

" is shown in the refrigerator compartment temperature display.

Press any button to return the display to the set temperature.

Installing the update:

1. Press the Options button and the Alarm off/lock button simultaneously.

"

Cn

" is shown in the freezer compartment display.

Note

Press both buttons simultaneously. The button operation is locked if only the Alarm off/lock button is pressed for an excessively long period.

2. Keep pressing the Options button until "

UP

" is shown in the freezer compartment display and "

OF

" is shown in the refrigerator compartment display.

14

3. Press the

+

button.

An animation is shown in the refrigerator compartment display.

The update will be installed.

All buttons are locked during the installation.

If the installation has been completed successfully, "

On

" is shown in the refrigerator compartment display.

If the installation has not been completed successfully, "

Er

" is shown in the refrigerator compartment display.

Restart the update later on.

If the installation cannot be completed after multiple attempts, notify Customer Service.

Customer Service access

If you contact Customer Service, they can access your appliance and view its status after you have given your consent. You need to have your appliance connected to your home network for this.

Further information about Customer Service access and its availability in your country is available under www.home-connect.com in the Help & Support area.

1. Contact Customer Service.

2. Confirm the start of Customer Service access in the app.

During Customer Service access the symbol CS appears on the control panel.

3. As soon as Customer Service has obtained the necessary data, they end access.

Note

You can interrupt remote diagnosis early by switching off Customer Service access in the Home

Connect app.

Information on data protection

When your Home Connect refrigerator is connected for the first time to a WLAN network that is connected to the Internet, your appliance transmits the following categories of data to the Home Connect server (initial registration):

Unique appliance identification (consisting of appliance codes as well as the MAC address of the installed Wi-Fi communication module).

Security certificate of the Wi-Fi communication module (to ensure a secure IT connection).

The current software and hardware version of your domestic appliance.

Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect functions for use and is required only when you want to use Home Connect for the first time.

en

Note

Note that the Home Connect functions can be used only in conjunction with the Home Connect app.

Information on data protection can be accessed in the

Home Connect app.

Declaration of conformity

Robert Bosch Hausgeräte GmbH hereby declares that the appliance which features Home Connect functionality is in accordance with the basic requirements and the other relevant provisions of the directive 1999/5/EC.

A detailed R&TTE Declaration of Conformity can be found online at www.bosch-home.com among the additional documents on the product page for your appliance.

Sabbatical mode

Sabbatical mode settings:

Accoustic signal is switched off.

Super cooling or super freezing is then ended

(if activated).

The light is switched off.

The light on the display panel is reduced to basic lighting.

Buttons are locked (except “options” button and setting button +).

Switching sabbatical mode on and off

1. To activate, simultaneously press the Options button and setting button + for 5 seconds.

The display field indicates that the sabbatical mode is switched on.

2. To deactivate, simultaneously press the Options button and setting button + for 5 seconds.

15

en

Alarm function

Press the “alarm/lock” button to switch off the warning signal.

In the following cases an alarm may be actuated:

Door opening alarm

If the appliance is left open for longer than one minute, the door alarm switches on. Close the door or press the

Alarm button to switch the warning signal off again.

Temperature alarm

The temperature alarm switches on if the freezer compartment is too warm and the food is at risk of thawing.

The acoustic and optical signal may be actuated without risk to the frozen food:

When switching on the appliance for initial use.

When large quantities of fresh food are placed in the appliance.

Freezer compartment

“AL” flashes on the freezer compartment display panel and “alarm” is displayed.

The temperature display indicates for 10 seconds the warmest temperature which was reached in the freezer compartment. Then the set temperature is displayed again.

The alarm display goes out as soon as the set temperature has been reached again.

Note

Do not refreeze thawing or thawed food. Only ready meals (boiled or fried) may be refrozen.

No longer store the frozen produce for the max. storage period.

Refrigerator compartment

m

Caution

If the refrigerator compartment has become too warm, cook warmed refrigerated food before consumption. If in doubt, do not use raw food.

Usable capacity

Information on the usable capacity can be found inside your appliance on the rating plate (see diagram at chapter “Customer service”).

Fully utilising the freezer volume

To place the maximum amount of food in the freezer, the top frozen food container can be taken out of the appliance. The food can then be placed directly on the shelves and stacked in the lower frozen food container.

Freezer compartment

Use the freezer compartment

To store deep-frozen food.

To make ice cubes.

To freeze food.

Note

Ensure that the freezer compartment door has been closed properly. If the door is open, the frozen food will thaw. The freezer compartment will become covered in thick ice. Also: waste of energy due to high power consumption!

When the freezer compartment door is closed, a low pressure occurs, causing a sucking noise. Wait two to three minutes until the low pressure has adjusted itself.

We recommend leaving the ice cube container in the appliance. This ensures optimum temperature distribution in the freezer compartment.

Purchasing frozen food

Packaging must not be damaged.

Use by the “use by” date.

Temperature in the supermarket freezer must be

-18 °C or lower.

If possible, transport deep-frozen food in an insulated bag and place quickly in the freezer compartment.

Max. freezing capacity

Information about the max. freezing capacity within

24 hours can be found on the rating plate (see diagram at chapter “Customer service”).

16

Freezing fresh food

Freeze fresh and undamaged food only.

To retain the best possible nutritional value, flavour and colour, vegetables should be blanched before freezing.

Aubergines, peppers, zucchini and asparagus do not require blanching.

Literature on freezing and blanching can be found in bookshops.

Note

Keep food which is to be frozen away from food which is already frozen.

The following foods are suitable for freezing:

Cakes and pastries, fish and seafood, meat, game, poultry, vegetables, fruit, herbs, eggs without shells, dairy products such as cheese, butter and quark, ready meals and leftovers such as soups, stews, cooked meat and fish, potato dishes, soufflés and desserts.

The following foods are not suitable for freezing:

Types of vegetables, which are usually consumed raw, such as lettuce or radishes, eggs in shells, grapes, whole apples, pears and peaches, hardboiled eggs, yoghurt, soured milk, sour cream, crème fraîche and mayonnaise.

Packing frozen food

To prevent food from losing its flavour or drying out, place in airtight containers.

1. Place food in packaging.

2. Remove air.

3. Seal the wrapping.

4. Label packaging with contents and date of freezing.

Suitable packaging:

Cling wrap, tubular film made of polyethylene, aluminium foil, freezer containers.

These products are available from specialist outlets.

Unsuitable packaging:

Wrapping paper, greaseproof paper, cellophane, bin liners and used shopping bags.

Items suitable for sealing packaged food:

Rubber bands, plastic clips, string, cold-resistant adhesive tape, etc.

Bags and tubular film made of polyethylene (PE) can be sealed with a film heat sealer.

Shelf life of frozen food

Storage duration depends on the type of food.

At a temperature of -18 °C:

Fish, sausage, ready meals and cakes and pastries:

■ up to 6 months

Cheese, poultry and meat:

■ up to 8 months

Vegetables and fruit: up to 12 months

en

Super freezing

Food should be frozen solid as quickly as possible in order to retain vitamins, nutritional value, appearance and flavour.

Several hours before placing fresh food in the freezer compartment, switch on super freezing to prevent an unwanted temperature rise.

As a rule, 4–6 hours is adequate.

This appliance runs constantly and the freezer compartment drops to a very low temperature.

If the max. freezing capacity is to be used, super freezing must be switched on for 24 hours before the fresh produce is placed in the freezer compartment.

You can freeze smaller quantities of food (up to 2 kg) without fast freezing.

Note

When super freezing is switched on, increased operating noises may occur.

Switching on super freezing

1. Keep pressing the “select” button until the freezer compartment climate zone is marked with an arrow.

2. Press “super” button.

If “super freezing” is switched on, “SU” and “super” are indicated on the display panel.

Switching off super freezing

1. Keep pressing the “select” button until the freezer compartment climate zone is marked with an arrow.

2. Press “super” button.

If super freezing is switched off, the “SU” and “super” displays go out on the display panel.

Note

Super freezing automatically switches off after approx.

2

^

days.

17

en

Thawing frozen food

Depending on the type and application, select one of the following options:

■ at room temperature in the refrigerator in an electric oven, with/without fan assisted hot-air in the microwave

■ m

Caution

Do not refreeze thawing or thawed food. Only ready meals (boiled or fried) may be refrozen.

No longer store the frozen produce for the max. storage period.

Refrigerator compartment

The refrigerator compartment is the ideal storage location for meat, sausage, fish, dairy products, eggs, ready meals and pastries.

Storing food

Store fresh, undamaged food. The quality and freshness will then be retained for longer.

In the case of ready-made products and bottled goods, observe the best-before date or use-by date specified by the manufacturer.

To retain aroma, colour and freshness, pack or cover food well before placing in the appliance.

This will prevent the transfer of flavours and the discolouration of plastic parts in the refrigerator compartment.

Allow warm food and drinks to cool down before placing in the appliance.

Note

Avoid contact between food and rear panel. Otherwise the air circulation will be impaired.

Food or packaging could freeze to the rear panel.

Note the chill zones in the refrigerator compartment

The air circulation in the refrigerator compartment creates different chill zones:

Coldest zone is between the vegetable container and the glass shelf situated above.

Note

Store perishable food (e.g. fish, sausage, meat) in the coldest zone above the vegetable container.

Warmest zone is at the very top of the door.

Note

Store e.g. hard cheese and butter in the warmest zone. Cheese can then continue to release its flavour and the butter will still be easy to spread.

“Cool-fresh” container

Foods suitable for “cool-fresh” container:

In principle all foods which are fresh and are to remain fresh for even longer, such as: fish, seafood, meat and sausage, dairy products, and ready meals.

Foods not suitable for the “cool-fresh” drawer:

Fruit and vegetables sensitive to cold (e.g.: tropical fruit such as pineapples, bananas, papaya, citrus fruits, melons as well as tomatoes, aubergines, zucchini, capsicums, cucumbers, potatoes).

The ideal storage location for these foods is the refrigerator compartment.

Vegetable container with humidity controller

To create the optimum storage climate for fruit and vegetables, you can set the air humidity in the vegetable container depending on the quantity stored:

■ smaller quantities of fruit and vegetables – high air humidity large quantities of fruit and vegetables – low air humidity

18

Notes

Fruit sensitive to cold (e.g. pineapple, banana, papaya and citrus fruit) and vegetables sensitive to cold (e.g. aubergines, cucumbers, zucchini, peppers, tomatoes and potatoes) should be stored outside the refrigerator at temperatures of approx.

+8 °C to +12 °C for optimum preservation of quality and flavour.

Condensation may form in the vegetable container depending on the type and quantity of products stored. Remove condensation with a dry cloth and adjust air humidity in the vegetable container with the humidity controller.

Super cooling

Super cooling sets the refrigerator temperature to the coldest temperature setting for approx. 6 hours.

Then the appliance automatically switches to the temperature set prior to super cooling mode.

Switch on super cooling mode, e.g.

■ before placing large quantities of food in the refrigerator compartment.

for the fast cooling of drinks.

Note

When super cooling is switched on, increased operating noises may occur.

Switching on super cooling

1. Keep pressing the “select” button until the refrigerator compartment climate zone is marked with an arrow.

2. Press “super” button.

If “super cooling” is switched on, “SU” and “super” are indicated on the display panel.

Switching off super cooling

1. Keep pressing the “select” button until the refrigerator compartment climate zone is marked with an arrow.

2. Press “super” button.

If super cooling is switched off, the “SU” and “super” displays go out on the display panel.

en

Ice and water dispenser

The following can be dispensed as required:

■ cooled water, crushed ice, ice cubes.

m

Warning

Never reach into the ice cube dispenser opening!

Risk of injury!

m

Caution

Do not place bottles or food in the cube container in order to cool them quickly. The ice maker may block and be damaged.

* Not all models.

Using the ice and water dispenser

The ice and water dispenser only works when the appliance is connected to the water mains.

When the appliance has been switched on, it takes approx. 24 hours until the first batch of ice cubes are ready.

When the appliance has been connected, there are still air bubbles in the lines.

Run off drinking water and pour away until water can be dispensed without bubbles. Pour away the first 5 glasses.

When using the ice maker for the first time, do not use the first 30-40 ice cubes for reasons of hygiene.

Operating the ice maker

As soon as the freezer compartment has reached its freezing temperature, ice cube production starts. After

2–3 hours the ready ice cubes are automatically discharged into the ice cube container.

Note

The appliance produces more ice if you lower the freezer compartment temperature. This will slightly increase the energy consumption of your appliance.

Occasionally ice cubes will freeze together and block the dispenser:

1. Open the door and check inside whether ice cubes are sticking to the ice and water dispenser.

2. If the ice and water dispenser is not blocked: m

Caution

A full ice cube container is heavy!

Carefully pull out ice cube container and remove ice cubes which are frozen together.

When the ice cube container is full, ice making switches off automatically.

When ice cubes are being made, the buzzing water valve, the water flowing into the ice cube tray and the falling ice cubes can be heard.

19

en

Observing drinking water quality

All materials used in the drinks dispenser are odourless and tasteless.

If the water has an aftertaste, this may be caused by:

Mineral and chlorine content of the drinking water.

Material of the domestic water line and connection line.

Freshness of the drinking water. If water has not been dispensed for a long time, the water may have a “stale” taste. In this case fill approx. 15 glasses of water and throw away.

We recommend that you regularly dispense a little fresh water from the water maker and that you do not switch off the appliance. This will ensure that the best water quality is retained.

The enclosed water filter will filter only particles out of the supply water, not bacteria or microbes.

Dispensing ice/water

Select the ice and water dispenser button (water, crushed ice or ice cubes).

Keep pressing the button until the required quantity is in the glass.

Dispensing water

Dispensing ice

Disconnecting the ice maker

If ice cubes are not to be dispensed for longer than

1 week (e.g. holiday), temporarily disconnect the ice cube maker to prevent the ice cubes from freezing together.

To disconnect the ice maker:

1. Remove the ice cube container.

2. Keep pressing the “options” button, until the [IWD off] function is marked with an arrow.

3. Activate by pressing the setting button + (function is framed).

4. Empty and clean ice cube container. Re-attach the ice cube container. Ensure that the ice cube container engages with the support.

Switching on the ice cube maker again:

1. Keep pressing the “options” button, until the [IWD off] function is marked with an arrow.

2. Deactivate by pressing the setting button - (function is no longer framed).

Note

The water from the water dispenser is cooled to a palatable temperature. If you would like the water colder, place ice cubes in the glass before dispensing the water.

Note

When dispensing fairly large amounts of water, the dispensed water may become warmer.

20

Water filter

m

Warning

Do not use the appliance in places where the water quality is risky or not sufficiently known about without suitable disinfection, before and after filtering.

A filter cartridge for filtering particles can be obtained from customer service or a specialist dealer.

■ m

Caution

After installing a new filter, always discard the ice produced within the first 24 hours after switching on the ice maker.

If the ice has not been used for a prolonged period, pour all ice cubes out of the container and also discard the ice produced within the next 24 hours.

If the appliance or the ice has not been used actively for several weeks or months or if the ice cubes have an unpleasant taste or odor, change the water filter.

Air trapped in the system may cause water to escape and the filter cartridge to be ejected.

Caution when removing.

The filter must be changed at least every 6 months.

Important information concerning the water filter

After use, the water system is subject to low pressure. Be careful when removing the filter!

Rinse the water system through if the appliance has not been used for a long period, or if the water tastes or smells unpleasant. In addition to this, draw water from the water dispenser for several minutes. If the unpleasant taste or smell persists exchange the filter.

Exchanging the filter cartridge

After 6 months you are prompted via the [filter change] display message to change the filter cartridge (see chapter “Special functions”).

Take out the filter cartridge as follows: en

Insert new filter cartridge.

Draw a few litres of water from the water dispenser.

Doing this removes air from the water system.

Pour water out of the used filter cartridge. The filter cartridge can be disposed of in the household rubbish.

Use locking cap

The ice and water dispenser can also be used without a water filter. In this case, fit the locking cap.

Note

The locking cap and the filter screen inside should be rinsed out under running water at regular intervals.

21

en

Specification and performance data sheet

For filter model: 9000 225 170

The model was tested by NSF International with reference to ANSI/NSF Standards 42 & 53 and certified for a reduction in the substances cited below.

Using replacement cartridge: 9000 077 104

The concentration of the indicated substances which are dissolved in water and penetrate the system was reduced to a value below or equal to the permitted limit value in accordance with ANSI/NSF 42 and 53 for water discharged out of the appliance.

Note

Even though the tests were conducted under standard laboratory conditions, the actual performance may deviate from these tests.

The system was tested and certified on model

9000 225 170 by NSF International with reference to ANSI/NSF Standard 53 for a reduction in cysts and turbidity, as well as with reference to ANSI/NSF

Standard 42 for a reduction in the taste and odour of chlorine.

Nominal particle class: I

Nominal service life: 2.800 litres

Substance

Particle class I

Particle size

> 0.5 to < 1.0 μ m

Taste of chlorine and turbidity

5.700.000

1.9

At least 10.000 particles/ml

2.0 mg/l + -10%

30.583

0.05

* Based on the use of Cryptosporium parvum ocysts.

Application guidelines / Water supply parameters

:

99.52

97.3

Water pressure

Water temperature *

Flow rate

Cysts *

Turbidity

Average in inflow

166.500

10.7

Inflow concentration Waste water concentration

Min. 50.000/l

11 x 1 NTU

1

0.3 l

207 - 827 kPa

0.6 °C - 38 °C

2.83 l/min.

The system is to be installed and operated according to the guidelines recommended by the manufacturer.

The filter is to be changed every 6-9 months.

Rinse new filter thoroughly for 5 minutes.

More detailed information can be found on the warranty card.

Average reduction as

%

99.99

97.10

Max. permitted concentration in waste water

99.95

0.5 NTU

Max. waste water

1

0.49

> 85% 69.000

> 50% 0.06

Min. reduction as % NSF test

99.99

95.42

98.9

96.84

511077-03

511078-03

511079-03

511081-03

Without appropriate disinfection before and after connecting it to the system, this product should NOT be used if the water is microbiologically contaminated or if the quality has not been ascertained. A system certified for cyst reduction should be used for disinfected water which possibly contains filterable cysts.

A one-year warranty is issued for the entire system

(except disposable cartridge). With reference to disposable cartridges a warranty is issued for material and processing faults only. As the service life of disposable cartridges depends on the local water conditions, no warranty is issued for them.

More detailed information on the prices of spare parts is available from your appliance dealer or parts salesman on site.

Manufactured by:

3 M Material Technology (Guangzhou) Ltd.

9 Nanxiang Er road, Science City,

Guangzhou, 510663, P.R. China

22

Features of the freezer compartment

(not all models)

Freezer calendar

Lift the door shelf and remove.

en

Special features

(not all models)

Adjustable glass shelf “easy Lift”

To prevent the quality of the frozen food from deteriorating, do not exceed the storage duration.The storage period depends on the type of produce. The figures next to the symbols indicate the permitted storage period of the produce in months.

In the case of commercially available frozen food observe the date of manufacture or use-by date.

Variable interior design

You can vary the shelves inside the appliance and the door shelves as required.

Pull shelf forwards, lower and swing out to the side.

The height of the shelf can be adjusted without taking it out. Take food off the shelf beforehand.

The max. shelf load: 3 kg

23

en

Switching off and disconnecting the appliance

Switching off the appliance

Pull out mains plug or switch off fuse.

Refrigerating unit switches off.

Disconnecting the appliance

If you do not use the appliance for a prolonged period:

1. Before switching off, it is most important that you switch the water supply to the appliance off for a few hours.

2. Take all food out of the appliance.

3. Pull out mains plug or switch off fuse.

4. Empty and clean the ice cube container (see chapter

Cleaning the appliance).

5. Clean the appliance interior (see chapter Cleaning the appliance).

6. Leave the appliance doors open to prevent odours from forming.

Defrosting

Freezer compartment

The fully automatic NoFrost system ensures that the freezer compartment remains free of ice.

Defrosting is no longer required.

Refrigerator compartment

Defrosting is actuated automatically.

The condensation runs through the drainage hole into an evaporation pan on the rear of the appliance.

Cleaning the appliance

m

Warning

Never clean the appliance with a steam cleaner!

m

Caution

Do not use abrasive, chloride or acidic cleaning agents or solvents.

m

Caution

Do not use scouring or abrasive sponges. The metallic surfaces could corrode.

m

Caution

Never clean shelves and containers in the dishwasher.

The parts may become deformed!

Proceed as follows:

1. Pull out the mains plug or switch off the fuse.

2. Take out the frozen food and store in a cool location.

3. Wait until the layer of frost has thawed.

4. Clean the appliance with a soft cloth, lukewarm water and a little pH-neutral washing-up liquid. The rinsing water must not run into the light.

5. Wipe the door seal with clear water only and then wipe dry thoroughly.

6. After cleaning reconnect the appliance.

7. Put the frozen food back into the appliance.

Interior fittings

To clean the equipment, all variable parts of the appliance can be taken out (see chapter Variable interior design).

Note

To take out and clean the containers, open the doors fully beyond 90°.

Removing the container

Pull out container all the way, lift to detach it from the holder and take out.

To insert the container, place on the telescopic rails and push into the appliance. Attach the container by pressing it down.

24

Removing vegetable container with humidity control

1. Pull out vegetable container.

2. Take out the glass shelf.

3. Remove the moisture cover.

en

Cleaning the water collection tray

Spilled water collects in the water collecting tray.

To empty and clean, remove the filter. Wipe out water collecting tray with a sponge or absorbent cloth.

Cleaning the ice cube container

If ice cubes have not been dispensed for a prolonged period, they will shrink, have a stale taste and stick together.

Pull out the container, empty and clean with lukewarm water.

m

Caution

A full ice cube container is heavy!

Replacing vegetable container with humidity control

1. First replace the moisture cover.

2. Insert the glass shelf.

3. Slide the vegetable container back in.

After cleaning, dry the container and feed screw thoroughly to prevent the new ice cubes from sticking.

Inserting the ice cube container

Push the ice cube container all the way back onto the supports until it locks into position. Ice cube production continues.

Note

If the container cannot be pushed all the way back, twist the screw conveyor in the container or remove frozen ice cubes from the area of the shelf.

25

en

Light (LED)

Your appliance features a maintenance-free LED light.

These lights may be repaired by customer service or authorised technicians only.

Tips for saving energy

Install the appliance in a dry, well ventilated room!

The appliance should not be installed in direct sunlight or near a heat source (e.g. radiator, cooker).

If required, use an insulating plate.

Do not block the ventilation openings in the appliance.

Allow warm food and drinks to cool down before placing in the appliance.

Thaw frozen food in the refrigerator compartment and use the low temperature of the frozen food to cool refrigerated food.

Open the appliance as briefly as possible.

Ensure that the freezer compartment door is always closed properly.

If available:

Fit wall spacers to obtain the indicated energy rating of the appliance (see “Installing the appliance”, section “Ventilation”). A reduced wall gap will not restrict the function of the appliance. The energy rating may then increase slightly.

The arrangement of the fittings does not affect the energy rating of the appliance.

Operating noises

Quite normal noises

Droning

Motors are running (e.g. refrigerating units, fan).

Bubbling, humming or gurgling noises

Refrigerant is flowing through the tubing or water is flowing into the ice maker.

Clicking

Motor, switches or solenoid valves are switching on/off.

Rumbling

Ready ice cubes from the ice maker are falling into the ice cube container.

Preventing noises

The appliance is not level

Please align the appliance with a spirit level. Use the height-adjustable feet or place packing underneath them.

The appliance is not free-standing

Please move the appliance away from adjacent units or appliances.

Containers or storage areas wobble or stick

Please check the removable parts and re-insert them correctly if required.

Bottles or receptacles are touching each other

Move the bottles or receptacles slightly away from each other.

26

en

Eliminating minor faults yourself

Before you call customer service:

Please check whether you can eliminate the fault yourself based on the following information.

Run an appliance self-test (see chapter “Appliance self-test”).

Customer service will charge you for advice even if the appliance is still under guarantee!

Fault

Temperature differs greatly from the set value.

Displays do not illuminate.

Display indicates “E..”.

Warning signal sounds and the temperature display on the freezer compartment flashes.

The freezer compartment is too warm! Frozen food is at risk!

The light does not work.

Appliance has no refrigeration capacity.

The light does not work.

The display does not illuminate.

The refrigerating unit is switching on more frequently and for longer.

Possible cause

Power failure; the fuse has been switched off; the mains plug has not been inserted properly.

Electronics have detected a fault.

Remedial action

In some cases it is adequate to switch off the appliance for 5 minutes.

If the temperature is too high wait a few hours and check whether the temperature has approached the set value.

If the temperature is too low check the temperature again the next day.

Connect mains plug. Check whether the power is on, check the fuses.

Call customer service.

Freezer compartment door is open.

Ventilation openings have been covered.

Too much food was placed in the freezer at once.

To switch off the warning signal, press the “alarm/lock” button.The display stops flashing.

The warmest temperature reached in the freezer compartment is indicated on the temperature display for 10 seconds.

Close the door.

Remove obstacles.

Do not exceed max. freezing capacity.

The light is defective.

Power failure.

(See chapter “Light”.)

Check whether the power is on.

The fuse has been switched off.

Check the fuse.

The mains plug has not been inserted properly. Check whether the mains plug is secure.

Appliance opened frequently.

The ventilation openings have been covered.

Do not open the appliance unnecessarily.

Remove obstacles.

Large quantities of fresh food are being frozen. Do not exceed max. freezing capacity.

27

en

Water and ice dispenser

Fault

Despite prolonged operating time, ice cubes are not being dispensed.

Bubbling, gurgling noises in the water line.

Possible cause

Tap turned off.

Water supply is interrupted. Water pressure too low.

Ice and water dispenser is switched off. “IWD off” is lit on the display panel.

Freezer compartment too warm.

Ice cubes are in the ice cube container but are not being dispensed.

Ice cubes are jammed in the outlet of the ice cube container or in the ice crusher.

Ice cubes are frozen together.

Ice cubes are watery.

Ice cubes have melted.

Water dispenser is not functioning. Tap turned off.

Water supply is interrupted. Water pressure too low.

The ice maker does not make enough ice or the ice is deformed.

Freezer compartment door is open.

Power failure.

The appliance or ice maker has only just been switched on.

A lot of ice has been taken.

Remedial action

Turn on tap.

Inform plumber.

Switch on ice and water dispenser (see chapter “Special functions”, section “Switching off [IWD off]”).

Lower temperature in the freezer compartment (see chapter

“Setting the temperature”).

Remove and empty the ice cube container.

Remove the ice cube container and rotate the screw conveyor by hand. Loosen any jammed chunks of ice with a wooden chopstick.

Remove the ice cube maker, empty and rub dry.

Close the door.

Check whether the power is on.

Turn on tap.

Inform plumber.

Approx. 24 hours is needed until ice production starts.

Low water pressure.

Approx. 24 hours is needed until the ice cube container is filled again.

Connect the appliance to the stipulated water pressure only

(see chapter Connecting the appliance, section Water connection).

Change the water filter.

Set temperature slightly colder in the freezer compartment.

The water filter is bunged up or used.

Temperature in the freezer compartment is too warm.

Water supply is interrupted or water line is blocked.

1. Check water supply.

2. Check whether the water line is blocked.

3. In certain cases, briefly switching off the ice and water dispenser is sufficient (see [IWD off] in section 'Special functions').

28

Appliance self-test

Your appliance features an automatic self-test program which shows you sources of faults which may be repaired by customer service only.

Starting the appliance self-test

1. Switch off the appliance and wait 5 minutes.

2. Switch the appliance on again.

3. Simultaneously press “options” and “select” buttons for 5 seconds.

The self-test programme starts. If “E..” is indicated on the display panel, an error has occurred. If this fault is displayed, inform customer service.

Ending the appliance self-test

Simultaneously press again “options” and “select” buttons for 5 seconds.

en

Customer service

Your local customer service can be found in the telephone directory or in the customer-service index. Please provide customer service with the appliance product number (E-Nr.) and production number (FD-Nr.).

These specifications can be found on the rating plate.

To prevent unnecessary call-outs, please assist customer service by quoting the product and production numbers. This will save you additional costs.

Repair order and advice on faults

Contact information for all countries can be found on the enclosed customer service list.

GB

IE

US

0344 892 8979

01450 2655

800 944 2904

Calls charged at local or mobile rate.

0.03 € per minute at peak.

Off peak 0.0088 € per minute.

toll-free

29

*8001039680*

8001039680 (9811) en

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals