Lenco Xemio 657 User manual

Lenco Xemio 657 User manual
USER’S MANUAL
Xemio-657
MP3/MP4 Media Player with 4GB memory
1
For information and support: www.lenco.com
2
Cautions

Do not place naked flames, such as lighted candles on or near the
product.

Do not place objects filled with liquids, such as vases on or near
the product.

Do not use or store this product in a place where it is subject to
direct sunlight, heat, excessive dust or vibration.

Do not use this product with wet hands.

Do not clean this product with water or other liquids.

Do not block or cover the slots and holes in the product.

Do not push foreign objects into the slots or holes in the product.

Do not attempt to open this product yourself. There are no user
serviceable parts inside.

Do not allow children access to plastic bags.
Safety Warnings

Before using this product, read and follow all warnings and
instructions.

This product is not intended for use by young children. Young
children should be properly supervised.

This product is intended for household use only and not for
commercial or industrial use.
3

Do not expose to dripping or splashing.

No naked flame sources, such as lighted candles, should be
placed on the product.

Ventilation should not be impeded by covering ventilation openings
with items such as newspapers, table cloths, curtains and the like.

Make sure the unit is adjusted to a stable position. Damage
caused by using this product in an unstable position or by failure to
follow any other warning or precaution contained within this user
manual will not be covered by warranty.
We, suggest retaining the packaging in case for future transport of the
product.
If at any time in the future you should need to dispose of this
product please note that: All batteries and accumulators need to be
removed from this product (Removal of Waste Batteries and
Accumulators).
 When participating in the traffic listening to a personal
music player can make the listener less aware of
potential dangers such as approaching cars.
WARNIN
4
G:
 Prolonged exposure to loud sounds from personal
music players may lead to temporary or permanent
hearing loss.
WARNIN
G:
1. Get to know the controls on Player
5
Item
Description
1
TFT LCD Display
2
Button (On / Off, Play / Pause)
3
Button (Previous / Fast-Rewind)
4
Button (Next / Fast-Forward)
5
M Button (Menu)
6
Button (Previous Menu / Exit)
7
Micro USB Port (PC Connection / Charge)
8
Microphone Position (mono, inside USB port)
9
Micro SD Memory Card Slot
10
Earphone Output Jack (3.5mm Stereo)
11
Button (Volume Down)
12
Button (Volume Up)
2. About Player Battery
Player has an internal, non–user-replaceable battery. For best
results, the first time you use player, let it charge for about 2 ~ 3 hours
or until the battery status icon in the “Connect” screen shows that the
battery is in full.
6
Battery is in full
Note: Player may continue use battery power after it’s been turned
off. For maintain the battery life and performance, if unit isn’t used for
a while, the battery need to be recharged, recharging the battery at
least once per month.
a. Charging the Battery:
You can charge the player battery in two ways:
 Connect player to your computer. Or,
 Use the USB power charger. (not included)
b. Connection and Charging:
 Once you have connected player with computer / power charger,
then you will see the “Connect” screen appear on screen,
 The level bars are running in battery status icon at the “Connect”
screen. The battery is in charging.
“Connect” Screen
7
In Charging
Important: The battery does not charge when your computer is in
sleep. The USB port on most keyboards does not provide enough
power to charge the player. Connect player to a USB 2.0 port on your
computer only to prevent charge problem.
3. Connecting and Disconnecting Player
You can connect the player with your computer to transfer those
media files and recorded voice memos when necessary, and to
charge the battery.
8
a. To Connecting Player
 To connect player to your computer, plug the connector of USB
Cable into a USB port on your computer, and connect the other
end to player, then the “Connect” screen appear for view.
 Now the player is ready for media files transfer with your computer
and the battery is charging.
 You can transfer the media files by using the computer mouse use
drag and place, or copy and paste, in between the player and your
computer. Disconnect it when you’re done.
b. To Disconnecting Player
It’s important not to disconnect player while it’s syncing or
transferring files. Eject the player before disconnect it.
 To eject player, press and hold M button for about 2 seconds, the
“Connect” screen will switch to “Main Menu” screen. And now is
safe to disconnect the player with your computer. Unplug the USB
cable from the player. Or,
 If you’re using a Windows PC, you can also eject player in My
Computer or by clicking the “Safely Remove Hardware” icon in
the Windows system tray, select the correspondence name of USB
Device and choose “Stop” > choose “Confirm” > choose
“Confirm” follow by the pop up windows you’re your computer.
9
 If you’re using a Mac, you can also eject player by dragging the
player icon on the desktop to the Trash.
 Disconnect the USB cable from the player and computer, simply
remove it.
 If you accidentally disconnect player without ejecting it, reconnect it
to your computer and sync again. However, some media file may
loss.
4. Getting Start the Player
Turn ON / OFF the player and use of Main Menu.
 Press and hold the
button for 3 seconds to turn ON, then you will
see any one of the following shown Main Menu screen, Music /
Movie / Record / Voice / Photo / eBook / Game / Setup, will
appear on LCD after the Loading and Opening screen have
displayed.
 To OFF the player, press and hold the
button for 3 seconds.
“Main Menu” screens
10
5. Use Setup Menu
You might need to set date & time or change some default setting
as you desired in setup sub menu before you start to use the player.
 To go into setup menu, from main menu, choose “Setup” by use
/
button and then press
button, a “Setting” menu appears to
use.
 You can go back to previous menu by press the
setup menu. Or, press and hold the
menu.
Setup Menu
11
button during in
button to return to main
(Menu Page 1)
(Menu Page 2)
a. To Setup “System time” (Date & Time):
 Choose “System time” by using
/
button and then press
button, a date & time setting screen appears to use.
 Press “ ” button, the year is highlighted then adjusting to current
year by pressing the
methods by “
/
/
” and
button. And repeating the adjusting
/
button again for finished those
items; Month, Date, Hour, Minute and seconds setting adjustment.
 Finally, you need to press the
button to confirm the adjustment
and back to Setup menu, if not the date & time will not to memorize
and you need to adjust them again.
Note: the set date & time will be losses if internal rechargeable
battery is fully emptied in protection mode. Adjust the clock again if
you want it to use.
b. To change “LCD set”
You can set the backlight to illuminate the screen for a certain
amount of time as you desired or make the backlight to always ON
12
when every time you turn ON the player.
 To change LCD backlight, choose “LCD set” > choose “Dark
mode”, a level bar with number appear then chose “0 (always
On) / 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50 seconds” as you
desired by using
and
/
buttons. Choose “0” to prevent the
LCD backlight from turning to off. (choosing this option decrease
battery performance)
c. To Change “Language”
This player can use difference OSD languages.
 To set the language, choose “Language”, and then choose which
language as you desired by using
and
/
buttons.
d. To Set “Power Off”
The Power Off setting can extend the time between battery
charges by turning OFF the player when you are not using the
controls or no operation. Also, Sleep function provided for more
choice.
 To set power off time, choose “Power off”, then choose “Off time”,
a levels bar with number menu appear, then choose “0 - 200
seconds” as you want by using
and
/
buttons.
 To set sleep time, choose “Power off”, then choose “Sleep time”, a
levels bar with number menu appear, choose “0 / 10 / 20 /30 / 40 /
13
50 / 60 / 70 / 80 / 90 / 100 / 110 / 120 minutes” as you want by
using
and
/
buttons.
e. To View “Memory info”
You can view about the memory status of player, such as the
numbers of remaining memory space available and the percentage of
memory have used.
 To view the status, choose “Memory info” by using
and
/
buttons. An information screen, remaining memory space available
and percentage of memory used, appear for view.
 To return to setup menu or main menu press
hold
button or press and
button.
f. To View “Firmware Version”
You might need to view the details about firmware information
inside the Player.
 Choose “Firmware version” by using
and
/
buttons, an
information screen appear for view.
 To return to setup menu or main menu, press
and hold
button or press
button.
g. To “Exit”
 Select Exit to back to main menu. Or, press and hold the
to go back main menu.
14
button
6. Use Music Menu
You can use music player to playback with supported music file
format of audio coding; WMA and MP3 are supported by the player. To
open the music player in Main Menu:
 From main menu, choose “Music” by using
/
and
button, a
“Music Now Playing” screen appears to use.
“Music Now Playing” Screen
a. To Play / Pause Music
 In Music Now Playing screen, press
 Press
button to pause the playing music.
 Press it again to resume.
b. Play Previous or Next Music
 Press
button to start the play.
button to play next music.
15
 Press
button to play previous music.
c. Use Fast-Forward or Fast-Backward
 Press and hold
button to use fast-forward
 Press and hold
button to use fast-backward.
d. Adjust volume level
 In music playing, press
/
buttons to adjust volume levels to Up /
Down.
 Wait for 6 – 8 seconds or press
button to return to music now
playing screen.
For hearing protection; A display warning pop-up on TFT screen,
when every time you increase the volume level and reach to the
default setting level which may exceed 85db. Press M button to
accept the warning and press
Button to increase the volume level.
e. Use Lyric Display
This player supports “*.LRC” lyric files and lyrics can synchronous
displayed while playing music if you music has lyric included. How to
know whether the lyrics exist? If the current song has matching lyric
files, the color dot beside the Lyric Message icon will be turned to
green color
from red
in Music Now Playing screen.
 Make sure the music file name and “*.LRC” file name must be
same and upload into player together.
16
 Playing the music with lyrics, and then press and hold M button to
enter the lyric display mode and the lyrics is displaying and moving
up accordingly with the playing music.
 Press M button to cancel the lyrics display and go back to Music
Now Play screen if you want.
7. Use Music Submenu in Music Stop Mode
You might need to selecting folders for music play and delete music
files. To do this:
a. Local Folder
 In Music Now Playing screen, press
button to stop the playing
music if player is in playing, then press M button to call up the
Music Submenu.
 In Music Submenu screen, choose “Local folder” a list menu
appear, and then select folder and / or choose a music file by using
/
and
button.
 It will go back to music now playing screen once a music file is
selected. Then press
button to play.
b. Delete file
 In Music Submenu screen, choose “Delete file” a list menu appear,
17
and then choose which music file that you want to delete by using
/
and
buttons.
 Once file is selected, press
button and choose Yes to confirm or
No to cancel.
c. Delete All
 In Music Submenu screen, choose “Delete all” then selects “Yes /
No” by using
/
button.
 One “YES” or “NO” appear then press
button to confirm.
 All music files will be deleted once YES is selected and confirmed,
a “Deleting” screen appear for a while and deleting process is in
progress, then “Empty disk!” message will shown on screen for few
seconds.
d. Exit
 Select Exit to back to music now playing screen.
8. Use Music Submenu in Music Playing Mode
You might need to do some changes for music playing, such as
repeat, EQ settings for music files… etc. To change setting:
a. To Set Repeat
 In music playing mode, press M button, a Music Submenu appear,
then choose “Repeat”, then choose “Normal / Repeat one / Folder /
18
Repeat folder / Repeat all / Random ” as you desired by using
and
/
buttons.
b. To Change Equalizer
 In music playing mode, press M button, a Music Submenu appear,
the choose “Equalizer”, then choose “Natural / Rock / Pop /
Classic / Soft / Jazz / DBB” as you desired.
c. Exit
 Select Exit to back to music now playing screen.
9. Use Movie Menu
a. To Play Movie
 From Main Menu, choose “Movie” by using
/
and
button, a
“Movie Now Playing” screen appears to use.
 In Movie Now Playing” screen, press
 Press
key to start the play.
button to pause and to back to Movie Now Playing screen.
Press it again, the video will play continue.
b. To Play Previous or Next Video
 Press
button to play next movie file.
 Press
button to play previous movie file.
c. Use Fast-Forward or Fast-Backward
 Press and hold
button to play fast-forward.
19
 Press and hold
button to play fast-backward.
d. Adjust Volume Level
 In movie playing, press
/
buttons to adjust volume levels to Up /
Down.
For hearing protection; a beep warning will be heard from earphone,
when every time you increase the volume level and reach to the
default setting level which may exceed 85dB. Press M button to
accept the warning and press
10.
button to increase the volume level.
Use Movie Submenu
You might need to selecting folders, delete movie files and set
repeat for movie play. You can make change during in the playing
mode at Movie Now playing screen To do this:
 In “Movie Now Playing” screen, press M button to enter to movie
submenu.
a. Local Folder
 In movie submenu screen, choose “Local Folder”, a file list menu
appear, and then select folder and / or choose a desired movie file
to play by using
/
and
button.
 It will go back to music now playing screen once a music file is
selected. Then press
button to play.
20
b. Delete File

In movie submenu screen, choose “Delete file” a file list menu
appear, and then choose which movie file that you want to delete
by using
/
buttons.
 Once file is selected, press
button and choose “Yes” to confirm
or “No” to cancel.
c. Delete All
 In movie submenu screen, choose “Delete all” then selects “Yes /
No” by using
/
button.
 One “YES” or “NO” appear then press
button to confirm.
 All movie files will be deleted once YES is selected and confirmed,
a “Deleting” screen appear for a while and deleting process is in
progress, then “Empty disk!” message will shown on screen for few
seconds.
d. Repeat
 In movie submenu, choose “Repeat”, then choose “Normal /
Repeat one / Folder / Repeat folder / Repeat all / Random” as you
desired by using
/
and
buttons.
e. Exit
 Select Exit to back to music now playing screen.
21
11.
Convert Video files into AMV
This tool can be used to transform those video files into AMV files
on the computer before upload them to your player.
 To install this video convert tool to your computer, open a folder
named “UTILITIES > Video Conversion Software” which stored
in your player’s internal memory or stored in a provided CD.
(Download it onto your computer for copy and installation)
 Select “Setup” to start the install program, the software will
automatically install to your computer.
 After installation is done, open folder “Media Player Utilities 4.28”
> click program “AMV&AVI Video converter” in All Program bar
on your window PC. The program interface as shown below:
22
Noted: This program is used to convert video files into AMV format,
currently only AMV format is supported by this player.
 Then click
to choose the folder where to save the AMV files, and
then click
to select the folder where the original files are. The
original file will show in the file window once selected.
23
 Move the mouse arrow and left click mouse on the unconverted
source files to select with highlight in the file window, then the
icon will be highlighted into
icon. Now click this
dialog box will be shown.
 Now click this
icon and a dialog box will be shown.
24
icon and a
 Make sure Video type is “AMV”, Screen width and height is
“160x120” selected. Video convert and Image quality should be
“Normal” and “High” as defaulted. Click “OK” to confirm the
setting.
 Now click
to start converting.
25
 After conversion, the AMV files will play automatically for preview.
 And now, the converted AMV file is ready to transfer, you can
simply copy and place those converted AMV files to the media
player.
Note: Only pixels in 160x120 can be supported by this player.
26
12.
Use Record Menu
You can use the player as a Voice Recorder and recording voice
memos using the built-in microphone.
a. To Start Recording Voice Memo
 From main menu, choose “Record” by using
/
and
buttons, a “Now Recording” screen appear to use.
“Now Recording” Screen
b. To Start / Pause Recording
 Press
button to start the recording and the recording time is
running.
 Press
button to pause the recording and recording time will stop
and flashing. Press it again the recording and time will run
continue.
27
c. To Save and Stop Recording File
 Press
or press and hold
button, the recorded file will save into
memory and ready for next recording.
 Press and hold
button, the recorded file will save into memory
and to exit.
13.
Use Record Submenu (in Stop Mode)
You might need to change the folder locations which want to store
the record file and / or change record quality to better compression
values.
 In Now Recording screen at stop mode, press M button, a “Record
Sub-menu appear to use.
a. Local folder
 In record submenu, choose “Local folder” and then choose the
folder name which you want to save the record file by using
and
/
buttons.
 Once folder name selected, press and hold the M button, then the
folder location is changed and go back to Now Recording screen.
 And now you can see the folder name is changed at the Record
Folder icon in “Now Recording” screen.
b. Record Type
28
 In record submenu, choose “Record type”, then choose “32K
BPS / 64K BPS / 128K BPS / 256K BPS” values as you desired by
using
14.
/
and
buttons.
Use Voice Menu
For playback and manage the recorded voice memos file.
 From main menu, choose “Voice” menu by using
/
and
buttons, a “Voice Now Playing” screen appear to use.
“Voice Now Playing” Screen
a. To Play and Pause Recorded Voice Memos
 In Voice Now Playing screen, press
recorded file.
 Press
button to pause the playing file.
29
button to start to play the
b. To Play Previous or Next File
 Press
button to play next file.
 Press
button to play previous file.
c. To Fast-Forward or Fast-Backward
Press and hold
buttons to use fast-forward
Press and hold
button to use fast-backward.
d. Adjust volume level
 In music playing , press
screen appears, then press
/
button, a change volume control
/
buttons to adjust volume levels to
up / down.
 Wait for 6 – 8 seconds or press
button to return to music now
playing screen.
15.
Use Voice Submenu in Stop Mode
You might need to change some setting as you desired for playing
Voice file, you can make change during in the playing mode at Voice
Now Playing screen
a. Local Folder

In Voice Now Playing screen, press
button to pause / stop the
playing file, if in playing mode, then press M button to call up the
voice submenu.
30
 In Voice submenu screen, choose “Local folder” a list menu
appear, and then select folder and / or choose a voice file by using
/
and
button.
 It will go back to music now playing screen once a music file is
selected. Then press
button to play.
b. Delete File
 In voice submenu screen, choose “Delete file” a list menu appear,
and then choose which voice file that you want to delete by using
/
and
buttons.
 Once file is selected, press
button and choose Yes to confirm or
No to cancel.
c. Delete All
 In voice sub-menu screen, choose “Delete all” then selects “Yes /
No” by using
/
button.
 One “YES” or “NO” appear then press
button to confirm.
 All music files will be deleted once YES is selected and confirmed,
a “Deleting” screen appear for a while and deleting process is in
progress, then “Empty disk!” message will shown on screen for few
seconds.
d. Exit
 Select Exit to back to music now playing screen.
31
16.
Use Voice Sub-menu in Playing Mode
You might need to do some changes for music playing, such as
repeat, EQ settings for music files… etc. To change setting:
a. Repeat
 In voice playing mode, press M button, a Music Sub-menu appear,
then choose “Repeat”, then choose “Normal / Repeat one / Folder /
Repeat folder / Repeat all / Random ” as you desired by using
and
/
buttons.
b. Exit
 Select Exit to back to music now playing screen.
Note: Press and hold the
17.
button will go back to Main Menu directly.
Use Photo Browse
You can use the player as picture / photo viewer:
 To browse picture / photo file, from main menu choose “Photo” by
using
/
and
button, a list menu appear to use.
 Choose a file by using
/
button, and then press
button to
play.
 Press
button to stop and to go back to list menu for other files
32
selection.
 To change previous / next photo, press
 Press and hold
18.
/
button.
button to back to main menu.
Use Photo Submenu in List Screen
You might need to change some setting for photo browse. To
change setting:
a. Local Folder
 In list menu, press M button to call up the photo submenu.
 In photo submenu, choose “Local folder” a list menu appear, and
then choose folder and file to browse by using
/
and M
button.
 Once photo file is selected, press
button to play.
b. Playback Set
 In photo submenu, choose “Playback set” and then choose
“Manual play”. However, you need to use
/
button to browse
next / previous photo in photo playing mode when Manual Play is
selected.
 Choose “Auto play”, a setting menu appear, then choose “2 / 3 / 4 /
5 / 6 / 7 / 8 / 9 / 10 second(s)” as you desired by using
/
and
buttons. The slide show function is activated as your selected
33
time gap to playing the photo files one by one automatically.
c. Delete file
 In photo submenu, choose “Delete file” a list menu appear, and
then choose which photo file that you want to delete by using
/
button.
 Once file is selected, press
button and choose Yes to confirm or
No to cancel.
d. Delete All
 In photo submenu, choose “Delete all” then selects “Yes / No” by
using
/
button.
 One “YES” or “NO” appear then press
button to confirm.
 All photo files will be deleted once YES is selected and confirmed,
a “Deleting” screen appear for a while and deleting process is in
progress, then “Empty disk!” message will shown on screen for few
seconds.
e. Exit
 Select Exit for back to photo browse list menu screen.
19.
Use eBook Menu
You can use the player as a text reader with supported file format
(.TXT).
34
a. To open eBook
 From main menu, choose “eBook” by using
/
and
buttons.
A list menu appears to use.
 Choose a file which you want to read by using
then press
button, and
button to play.
 Press
button to change next page,
 Press
button to go back to previous page,
 Back to list menu screen, press
button.
 Go back to main menu, press and hold
20.
/
button.
Us eBook Submenu in list menu screen
You might need to change some setting for eBook reading. To
change setting:
a. Local Folder
 In eBook list menu screen, press M button to call up the eBook
Submenu.
 In eBook Submenu, choose “Local folder” a list menu appear, and
then choose folder and file by using
 Once file is selected, press
/
and
button.
button again to read.
b. Playback Set
 In eBook Submenu, choose “Playback set” and then choose
35
“Manual play”. You need to use
/
button to change next /
previous page for reading when Manual Play is selected. Or,
 Choose “Auto play”, a setting menu appears, then choose “1 / 2 /
3 / 4 / 5 / 5 / 6 / 7 / 8 / 9 / 10 second(s)” as you desired by using
and
/
buttons. The Page Flip function is activated as your
selected time gap to playing.
c. Delete file
 In eBook Submenu, choose “Delete file” a list menu appear, and
then choose which eBook file that you want to delete by using
/
button.
 Once file is selected, press
button and choose Yes to confirm or
No to cancel.
d. Delete All
 In eBook Submenu, choose “Delete all” then selects “Yes / No” by
using
/
button.
 One “YES” or “NO” appear then press
button to confirm.
 All eBook files will be deleted once YES is selected and confirmed,
a “Deleing” screen appear for a while and deleting process is in
progress, then “Empty disk!” message will shown on screen for few
seconds.
e. Exit
36
 Select Exit for back to eBook list menu screen.
21.
Us eBook Submenu in Playing Mode
You might need to add, select and delete some bookmark when you
reading, to do this:
a. Bookmark Select
 In eBook playing mode, choose “Bookmark select” by using
and
/
button.
 Choose a stored bookmark which you want to call and then press
M button to play.
b. Bookmark Delete
 In eBook playing mode, choose “Bookmark delete” a list menu
appears, and then choose which saved bookmark you want to
delete by using
/
button.
 Once bookmark is selected, press
button to confirm. The
bookmark is deleted and goes back to current reading play.
c. Bookmark Add
 In eBook playing mode, select the reading page you want to
bookmark, press M button to call up eBook submenu.
 Choose “Bookmark Add” by using
/
button and then press
button, the pages is saved into bookmark and go back to current
37
reading page automatically.
d. Exit
 Select Exit for back to eBook list menu screen.
22.
Use Memory Card Slot
This player allows you to play those support media files from your
memory card (T-Flash). Also it will increase the mobile hard disk
memory capacity of the player if you use this option.
a. To Play From Memory Card:
 Turn Off the player. Now insert your Micro SD memory card into the
memory card slot on side of player.
 Turn On the player and now the Micro SD memory card, T-Flash, is
ready to use.
 The “Card folder” item will be existed to use when you enter into
those music, movie, photo, , Record, Voice and eBook submenu.
 Go into the card folder and choose you desired folder(s) and file(s)
to play.
 To take out the Micro SD memory card, turn Off the player.
23.
Use Game Menu
38
There have a game name “Snake”. Control the snake move up, down,
left and right to eat the food (dot) which will exist somewhere on TFT
screen. The snake’s body will get longer at every eats for food, but
don’t let the snake hit the walls and hit the snake body.
 To play game, from Main menu, choose “Game” menu, then
choose a game to play.
 Control KEY instruction;
 Press:
= left,
= right, M = Up,
= Down,
= Pause.
 Press and hold M button to exit the game.
24. Reset Device
In some circumstances, the device may encounter dead halt during
use. This device has design with built-in a mini tact switch which
located at the behind of the earphone jack, so it can provide reset
function to restart the device by pass through the earphone jack hole.
To Reset:
 Use a 1mm stick or similar object (like tooth stick), and carefully
insert the stick, use dull side, into the earphone jack hole until you
feel to hit the end. Actually that is the tact switch button surface.
 Then add a bit of force and you will get a click sound and feeling
return from switch. The device is reset and restart in seconds.
39
Important: Do not reset the device if it is proper working.
25.
Trouble Shooting
Unit cannot turn ON
* Check whether Power is slide to ON.
* Check battery is it charged with enough
energy.
No sound is heard * Check whether Volume is set “0” and
from headphone.
connect the headphone plugs firmly.
* Check whether the headphone plug is dirty.
* Corrupted MP3 may make a static noise and
the sound may cut off. Make sure that the
music files are not corrupted.
Characters in LCD * Check whether the right language has been
are corrupted
selected.
Download of music * Check whether USB cable is damaged and
files fails.
is connected properly.
* Check whether driver is installed correctly.
* Check whether the player’s memory is in full.
40
26.
Specification
Dimension
85mm (H) x 41.5 mm (W) x 9.0mm (D)
Weight
25.5g
LCD
1.8 inches, Resolution (RGB) 128 x 160
PC connection
USB 2.0 (High Speed)
Earphone Impedance
32 Ohm
Internal Memory
See carton or giftbox
Memory Card Slot
Micro SD Card (support up to 16GB and
possible for 32GB)
Battery
Lithium 3.7V, 170mAh
Max. Play Time: 8 - 10 Hours (MP3 music
with power saving mode)
Power Source
DC Input: DC 5V 500mA
Audio
Earphone Output
2mW x 2 at 32 Ohm
Frequency
20Hz to 20000Hz
Responses
SNR
> 70dB
Music Format
MP3 / WMA
32Kbps – 320kbps
Movie Format
AMV
160x120
Recorder Coding
WAV
32
41
/
64
/
128
/
256kbps
Picture Format
JPEG / BMP
eBook Format
TXT
Operating
0 to 40℃
Temperature
Operating System
Window 2000/XP/Vista/Win7, Mac 9.2 or
Higher
27.
Disclaimer
Updates to Firmware and/or hardware components are made
regularly. Therefore some of the instruction, specifications and
pictures in this documentation may differ slightly from your particular
situation. All items described in this guide for illustration purposes only
and may not apply to particular situation. No legal right or entitlements
may be obtained from the description made in this manual
28.
Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
42
Germany
0900-1520530 (Local charges)
The Netherlands 0900-23553626 (Local charges + 1ct p/min)
Belgium
02-6200115
(Local charges)
France
03-81484280 (Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6
PM.
When contacting Lenco, you will always be asked for the model and
serial number of your product. The serial number can be found on the
back of the device. Please write down the serial number below:
Model: XEMIO-657
Serial number:_________________________________
Lenco offers service and warranty in accordance to European law,
which means that in case of repairs (both during and after the
warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs
to Lenco directly.
43
Important note: If this unit is opened or accessed by a non-official
service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional
use, all warranty obligations of the manufacturer will be voided.
29.
CE marking
Products with the CE marking comply with the EMC
Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of
the European Community.
The declaration of conformity may be consulted at
http://www.lenco.eu/supportfiles/CE/fvnf8gbhegf899g.pdf
30.
Recycle
This symbol indicates that the relevant electrical
product or battery should not be disposed of as general
household waste in Europe. To ensure the correct
waste treatment of the product and battery, please
dispose them in accordance to any applicable local
44
laws of requirement for disposal of electrical equipment or batteries. In
so doing, you will help to conserve natural resources and improve
standards of environmental protection in treatment and disposal of
electrical waste (Waste Electrical and Electronic Equipment Directive).
®All rights reserved
45
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement