Danfoss Ally™ Electronic radiator thermostat Data Sheet

Danfoss Ally™ Electronic radiator thermostat Data Sheet

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Danfoss Ally™ Electronic radiator thermostat Data Sheet | Manualzz

Data Sheet

Danfoss Ally™

Radiator Thermostat

Application

© Danfoss | FEC | 2020.07

Danfoss Ally™ Radiator Thermostat is a connected radiator thermostat for residential use.

Danfoss Ally™ Radiator Thermostat is battery powered, compact and easy to operate with a manual hand wheel and single button. Danfoss Ally™ Radiator Thermostat is a Zigbee Certified Product, compatible with Danfoss Ally Gateway™ and with third party certified systems using Zigbee technology.

Danfoss Ally™ Radiator Thermostat is easy to install, in just 30 seconds! Adapters are available for all thermostatic valves manufactured by Danfoss and most other radiator valve manufacturers.

Features:

• Programming and control via ZigBee gateway

• Energy savings

• Easy to install

• Easy to operate

• Manual mode

• Open-window function

• PID Accurate temperature control

• Adaptive learning

• Easy to read LCD display

• Display rotation -180 degrees

• Min./max. temp. range

• Child lock

• Frost protection

• Valve exercise function

• Backlit display

• Battery life time up to 2 years

• Visual warning of low battery

• Software upgradeable

AI319043912283en-000103 | 1

Data Sheet

Specifications

Danfoss Ally™

Radiator Thermostat

Thermostat type

Recommended use

Actuator

Display

Software classification

Control

Power supply

Power consumption

Trasmission Frequency / Power

Battery life

Programmable electronic radiator valve controller

Residential (pollution degree 2)

Electromechanical

LCD with white backlight

A

PID

2 x 1.5 V alkaline AA batteries

3 mW in standby, 1.2 W when active

2,4 GHz / < 40 mW

Up to 2 years

Low battery signal

Ambient temperature range

Battery icon will flash in display.

0 to 40 °C

Transportation temperature range -20 to 65 °C

Maximum water temperature 90 °C

Temperature setting range

Clock accuracy

Spindle movement

Noise level

5 to 35 °C

+/- 10 min/year

Linear, up to 4.5 mm, max. 2 mm on valve (1 mm/s)

<30 dBA

Safety classification

Open-window function

Weight (incl. batteries)

IP class

Integrations*

Type 1

Activated at temperature decrease or by ZigBee command

198 g (with RA adapter)

20 (not to be used in hazardous installations or in places where it will be exposed to water)

Partner API, Google Assistant, Amazon Alexa

Approvals, markings etc.

* Requires Danfoss Ally™ Gateway

2 | © Danfoss | FEC | 2020.07

AI319043912283en-000103

Data Sheet

Accessories

Danfoss Ally™

Radiator Thermostat

Adapter type

For Danfoss

RA valves

Code no.

014G0251

For valves

M30 x 1,5 (K)

014G0252

Adapter

For Danfoss

RAV valves

014G0250

For Danfoss

RAVL valves

For Danfoss

RTD valves

For M28 valves:

- MMA

- Herz

- Comap

For Orkli valves

014G0253

014G0264

014G0257

For Caleffi and

Giacomini valves

(Both adaptors supplied)

014G0263

Valve

34

26

© Danfoss | FEC | 2020.07

AI319043912283en-000103 | 3

Data Sheet

Mechanical Installation

Danfoss Ally™

Radiator Thermostat

1. Start by mounting the appropriate adapter.

Identify the needed adapter from the table on pg 3.

2. Insert the batteries, then mount the thermostat onto the adapter by turning it until you hear a click.

3. Press and hold the button for 3 seconds.

The Danfoss Ally™ Radiator Thermostat is now mounted and will display the current temperature.

Measuring the room temperature

Danfoss Ally™ Radiator Thermostat is measuring the temperature with multiple built-in sensors to ensure accurate control. Based on these readings the room temperature is calculated for an area approx. 20 cm in front of the display. This allows

Danfoss Ally™ Radiator Thermostat to control the actual room temperature very accurately.

20 cm

Be aware that sources of cold or heat, e.g. fireplace, direct sun or draft, might affect the function of

Danfoss Ally™ Radiator Thermostat.

Note! The displayed temperature is always the set temperature, not the actual room temperature.

4 | © Danfoss | FEC | 2020.07

AI319043912283en-000103

Dimensions

94 mm with RA valve adapter

91 mm with M28 valve adapter

90 mm with Caleffi valve adapter

86 mm with RAV/RAVL valve adapter

82 mm with M30 valve adapter

90 mm with Giacomini valve adapter

© Danfoss | FEC | 2020.07

AI319043912283en-000103 | 5

advertisement

Related manuals

Download PDF

advertisement