Biamp Apart CHAMP-4 Data Sheet

APART CHAMP-4

CHAMP-4

Convection cooled 4-channel power amplifier

The CHAMP-4 versatile power amplifier is a part of the revolutionary CHAMP-series of convection cooled power amplifiers what makes this unit maintenance free. The

CHAMP-4 has no fan inside which implicates the amplifier works very silent and it stays dust-free at all times.

The CHAMP-4 amplifier has 4 individual amplifier channels but can be bridged into 2 stereo channels or even a 2.1 sound system. Use two channels as subwoofer channels and drive your top loudspeakers with the two remaining channels and experience the pure musical power of CHAMP-4.

It is just one of the ways in which you can use this quad amplifier.

The built-in APC Protection Technology allows you to preset the power potential of the amplifier. It constantly analyses incoming music signals and keeps the dynamics alive. An additional ultra fast peak limiter avoids that the amplifier starts to clip or get distorted.

TECHNICAL SPECIFICATIONS

dynamic output power 4 ohms in watts dynamic output power 8 ohms in watts height- rack units (1U=44 mm) in U depth (incl front) in mm

4 x 125

4 x 75 dynamic output power bridged

8 ohms in watts

2 x 230

4 minimum impedance load per channel in ohms power consumption (max) in watts

400

1

359 output channels 4 frequency response (in Hz) applicable low impedance

20 - 40 k

yes

RMS output power 4 ohms in watts

RMS output power 8 ohms in watts output power RMS bridged 8 ohms in watts minimum impedance load bridged per channel in ohms

19" (483 mm wide) rack mounting depth (build in) in mm power supply line input unbalanced cooling system

Net weight product (kg)

4 x 80

4 x 60

2 x 130

8

yes

337

230 VAC

4

convection

7.50

biamp.com/apart | [email protected]

MORE PICTURES

APART CHAMP-4 biamp.com/apart | [email protected]