Biamp Apart MA125 Data Sheet

APART MA125

MA125

Professional public address mixing amplifier

The MA125 is the most easy and universal 100 volt professional mixing amplifier for commercial and industrial applications. This amplifier is very intuitive to use because it has only the buttons available you really need. MA125 can drive 8 ohms or constant voltage loudspeakers.

4 microphone inputs with integrated speech filters, 4 selectable line inputs and one emergency line / telephone input are available where MIC input 1 is meant to be the main microphone paging input. The MA125 allows you to have priority with your paging microphone as well as a seamless mix of your microphone with your sound source.

MA125 has a 3-level priority system where the emergency line / telephone input at the back have the highest priority.

MIC1 has the second priority level and the third priority level can be activated by a dry contact at the back of the amplifier that mutes all background music inputs and activates the integrated chime. Further the MA125 is supplied with detachable 19” brackets.

When needed the signals mixed via the MA125 mixing amplifier can be recorded or distributed via the record output. You can even insert external signal processors or use the MA125 as a pre-amplifier in combination with an external power amplifier.

TECHNICAL SPECIFICATIONS

yes 19" (483 mm wide) rack mounting depth (build in) in mm power supply power consumption (max) in watts output power RMS 8 ohms in watts minimum impedance load in ohms zone outputs inputs with Phantom power tone control

VOX mute emergency input priority levels cooling system applicable low impedance

241

115 - 230 VAC

350

125

8

1

4

yes

yes

yes

3

convection

yes height- rack units (1U=44 mm) in U depth (incl front) in mm emergency power supply

2

261

24 VDC output power RMS 100 volts in watts

125

125 dynamic output power 100 volts in watts output power tappings 100 - 70 - 50 volts - 8 ohms

MIC inputs balanced 4 line input unbalanced priority switch chime priority output

4

1

yes

24 VDC frequency response (in Hz) applicable in 100V

Net weight product (kg)

40 - 22 k

yes

9.80

biamp.com/apart | [email protected]

biamp.com/apart | [email protected]

APART MA125

MORE PICTURES

APART MA125 biamp.com/apart | [email protected]

ACCESSORIES

MICPAT-D

All call dynamic paging microphone

APART MA125 biamp.com/apart | [email protected]