APART MASK4CT-BL
MASK4CT-BL
4.25" design two-way loudspeaker with Clickmount system
The MASK4CT has a unique design and delivers a crystal clear sound for all music applications. The MASK4CT can be used as a 70V/100V speaker with power tapping on 20
- 10 - 5 - 2.5 watts in 100V or as a low impedance 16 Ohm speaker. This results in a versatile speaker that can be used in any location and any application. The cabinet is made of high quality enforced PP4 ABS, with an aluminium grill. The design of the MASK4CT ensures high quality and long lasting performance in indoor and outdoor use, even under extreme weather conditions.
The MASK4CT has a powerful 4.25” coated paper cone woofer and a 1” silk dome tweeter which results in a high
SPL and extremely low distortion.
This ensures an unprecedented clarity over the whole frequency spectrum. The built-in 3-step protection and the high-quality components make the MASK4CT an ultra- reliable, fail safe loudspeaker even at high power loads.
Thanks to the revolutionary design of the ClickMount bracket, the MASK4CT is without a doubt the fastest and most installer friendly loudspeaker to-date. The pre-defined clicks on the Clickmount ensure a perfect alignment for every loudspeaker. With the discrete cable management system, integrated spirit level and in/out connectors, the full cabling is done on the bracket. To complete the installation simply click the loudspeaker on the ClickMount!
TECHNICAL SPECIFICATIONS
height in mm depth in mm woofer size in inch tweeter size in inch
238
144
4,25
1 colour black / white
70V transformer power taps in watts
20 - 10 - 5 - 2.5 - 1.25
low impedance dynamic power in watts
70
SPL 1W/1m in dB 89 frequency response in Hz grille main material
Horizontal dispersion angle
1000 Hz closest RAL colour (subject to deviations)
80 - 20k
aluminium
180°
RAL9016 (W) / RAL9011 (BL) width in mm loudspeaker system woofer cone material
144
2-way
coated paper mounting system
100V transformer power taps in watts
20 - 10 - 5 - 2.5
impedance (ohms) 16 low impedance RMS power in watts max SPL 1m in dB
clickmount
50
104 main construction material
IP rating
Vertical dispersion angle 1000
Hz
Net weight product (kg)
ABS plastic
180°
2,25 biamp.com/apart | [email protected]
POLAR PLOTS
APART MASK4CT-BL biamp.com/apart | [email protected]
MORE PICTURES
APART MASK4CT-BL biamp.com/apart | [email protected]
biamp.com/apart | [email protected]
APART MASK4CT-BL
biamp.com/apart | [email protected]
APART MASK4CT-BL
APART MASK4CT-BL
ACCESSORIES
MASKCW-BL
Double V-shaped cluster bracket for MASK4C(T)-BL/MASK6C
(T)-B
MASKCV-BL
V-shaped 2-way cluster bracket for MASK4C(T)-BL/MASK6C
(T)-BL
MASKCL-BL
L-shaped side bracket for MASK4C(T)-BL / MASK6C(T)-BL biamp.com/apart | [email protected]
