Biamp Apart REVAMP4120T Data Sheet

APART REVAMP4120T

REVAMP4120T

4-channel 100V bridgeable digital power amplifier, 4 x 120W

REVAMP4120T is a professional 4-channel digital power amplifier with 4 x 120 watts output power @ 100 volt (or

@ 4 ohms), but the unit is also bridgeable to 2 x 240 watts

@ 100 volt (or @ 4 ohms). The unit incorporates a high efficient SMPS power supply, outputs with efficient Class

D output topology and output transformers.

REVAMP4120T is the ideal amplifier for applications with

4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency.

In order to match each input to its respective source the input sensitivity can be adapted to your needs.

The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 240 watts of output power!

The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound.

Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4120T amplifier.

TECHNICAL SPECIFICATIONS

dynamic output power 4 ohms in watts dynamic output power 8 ohms in watts

4 x 120

4 x 60 dynamic output power bridged

8 ohms in watts

2 x 240

4 x 120 output power RMS 100 volts in watts minimum impedance load per channel in ohms

4 power consumption (max) in watts height- rack units (1U=44 mm) in U depth (incl front) in mm

525

2

338 power supply technology output channels

switching mode power supply

4 line input unbalanced power amp topology cooling system applicable low impedance

4

class-D

fan

yes

RMS output power 4 ohms in watts

RMS output power 8 ohms in watts

4 x 120

4 x 60 output power RMS bridged 8 ohms in watts

2 x 240 output power RMS bridged 100 volts in watts

2 x 240

8 minimum impedance load bridged per channel in ohms

19" (483 mm wide) rack mounting depth (build in) in mm

yes

330 power supply output voltage tappings

115 - 230 VAC

100 - 70 - 50 - 35 volts - 4 ohms line input balanced channel separation frequency response (in Hz) applicable in 100V

Net weight product (kg)

4

> 68 dB @ 1 kHz

50 - 20 k

yes

12.10

biamp.com/apart | [email protected]

biamp.com/apart | [email protected]

APART REVAMP4120T

MORE PICTURES

APART REVAMP4120T biamp.com/apart | [email protected]