Biamp Apart ZONE4 Data Sheet
Biamp Apart ZONE4 is a 4-zone stereo pre-amplifier that allows you to control four stereo zones with one unit. It features 4 music sources, 3 assignable microphones, and a digital display for monitoring. Each zone has independent MIC-MIX level control, bass-treble control, and a line input selector. The ZONE4 can be controlled via the front panel, RS232, IR serial, or ZONE4R remote control panels. It is rack-mountable and comes with removable brackets and a metal cover for MIC settings protection.
advertisement
APART ZONE4
ZONE4
4-zone stereo pre-amplifier
The sophisticated pre-amplifier ZONE4 allows you to control four stereo zones with just one affordable unit. In any of the 4 zones you can play music that comes from one of the 4 music sources you can connect.
There is also the possibility to assign 3 microphones to each zone where MIC1 can be a dynamic priority mic (via contact closure) or a 4-zone selective paging microphone
(MICPAT-4). Each signal is assignable to any of the four output zones through dipswitches on the front and the back of the unit. Phantom power supply on MIC 1 & 2 can be activated via a dip switch.
The ZONE4 can be controlled from the front panel (with digital display), via the RS232-connector or via the IR serial.
On top of that you can control the unit via the ZONE4R remote control panels. Thes control panels have a clear LED status display and buttons for music level, MIC/MIX level, source select and mute controls. Because the remote is wired with a normal CAT5 cable, it is very easy to install.
On the output side, there is a line input selector and music level control per zone. A clear digital display makes it easier to monitor the functioning of the unit. Further, there are independent MIC-MIX level control and bass-treble control per zone.
The unit is 19” format and comes standard with removable brackets. The removable metal cover (included) protects your MIC-settings.
TECHNICAL SPECIFICATIONS
19" (483 mm wide) rack mounting depth (build in) in mm power supply
yes
196
115 - 230 VAC zone outputs 4 stereo output level unbalanced (dB) 0 signal to noise level SNR (dB) >90 crosstalk (dB) >75
MIC level control yes source selection per zone
MIC inputs unbalanced
yes
0
Phantom power voltage in volts 18 selectable input dynamics no line input balanced
S/PDIF input
RS232 (serial communication port) priority input contact
0
no
yes
yes height- rack units (1U=44 mm) in U depth (incl front) in mm power consumption (max) in watts output level balanced (dB)
1
205
25
S/PDIF output total harmonic distortion TBH
(%) music level control
VCA level control
0
no
<0.02
MIC inputs balanced inputs with Phantom power noise gate on MIC selectable output dynamics
3
2
yes
no line input unbalanced tone control wall panel controls
no
no
4 stereo
yes
yes biamp.com/apart | [email protected]
chime priority output contact frequency response (in Hz) applicable low impedance
no
no
20 - 30 k
yes maximum qty paging Mics emergency input priority levels applicable in 100V
Net weight product (kg)
4
yes
2
yes
2.75
APART ZONE4 biamp.com/apart | [email protected]
MORE PICTURES
APART ZONE4 biamp.com/apart | [email protected]
ACCESSORIES
ZONE4R
ZONE4 wall control panel for music level & source select
MICPAT-4
Selective 4-zone paging station
APART ZONE4 biamp.com/apart | [email protected]
advertisement
Frequently Answers and Questions
How many stereo zones can the ZONE4 control with just one unit?
What type of microphones can be assigned to each zone?
How many music sources can be connected to the ZONE4?
How can you control the ZONE4?
What is the maximum power consumption of the ZONE4?
What is the output level of the ZONE4 for unbalanced signals?
Does the ZONE4 have a S/PDIF output?
What is the signal-to-noise ratio of the ZONE4?
Does the ZONE4 have MIC level control?
How many balanced MIC inputs does the ZONE4 have?
Related manuals
advertisement