NEC UN462VA-TMX4P 46" LED-Backlit 3.5mm 2x2 Video Wall Bundle Installation Instructions
NEC UN462A-TMX4P is a 46-inch professional-grade display designed for use in video walls and other commercial applications. It features a slim bezel design, allowing for near-seamless拼接and a high brightness output of 500 cd/m2, ensuring excellent visibility even in brightly lit environments. The display also has a wide viewing angle of 178 degrees, making it easy to view from any angle.
In terms of connectivity, the NEC UN462A-TMX4P is equipped with a variety of inputs and outputs, including DisplayPort, HDMI, DVI, and VGA. It also has a built-in USB media player, allowing you to play content directly from a USB drive. The display is also compatible with NEC's MediaPlayer software, which allows you to control and manage content from a central location.
advertisement
QIG-TMX4P-462AVA
NEC Display Solutions of America, Inc.
UN462A-TMX4P, UN462VA-TMX4P
Parts List o (4) UN462A , UN462VA Displays o (4) Onsite Service Warranties (ONSITEMN-3Y-17) o (4) Peerless Pullout Wall Mounts (DS-VW775) o (1) Peerless Wall Mount Spacer (DS-VWRS013)
Rev 1.1 o (1) 25ft Cat5e Patch Cable o (1) IR/Remote Control Kit (KT-RC3) o (2) Overframe Bezel Kits (KT-46UN-OF5) o (1) SurgeX 4-Port Power Conditioner o (1) Display Wall Calibrator Kit (KT-LFD-CC2)
NOTES: o Any walls that this video wall solution is anchored to must be strong enough to support the displays and the installation must be in accordance with any local building codes. All mounting apparatuses must make secure contact to wooden studs. o Please read entire document before starting installation
QIG-TMX4P-462AVA
NEC Display Solutions of America, Inc.
UN462A-TMX4P, UN462VA-TMX4P Rev 1.1
1. For mounting information, please refer to Installation Instructions provided by Peerless
Industries, Inc. inside the box of the DS-VW775.
2. Connect the NEC display using the provided DisplayPort cables. Please note that in the picture below, the IN connection is on the left and circled in red while the OUT connection is on the right and circled in blue.
Or
Connect the NEC display using the provided HDMI cables. Please note that in the picture below, the IN connection is on the right side of the display and circled in red while the OUT connection is located on the bottom of the display and circled in blue.
3. Connect the LAN cables that are located within the display box to daisy chain each display.
Note that the 25ft cat5e patch cable provided is optional and can be used for connecting the source to display 1 within the wall. Note that in the picture below, LAN1 is on the left and circled in red while LAN2 is on the right and circled in blue. LAN1 should be utilized as the
IN connection and LAN2 should be utilized as the OUT connection. The LAN daisy chain can be utilized to pass RS232C, IR Remote or TCP/IP information to each display down the daisy chain.
2
QIG-TMX4P-462AVA
UN462A-TMX4P, UN462VA-TMX4P
NEC Display Solutions of America, Inc.
Rev 1.1
4. Apply the OverFrame bezel kit to the video wall. Please follow instructions provided with kit.
KT-46UN-OF5 and KT-46UN-OF3 is utilized with the X464UNV displays
Overframe Kit
5. Screw the IR Receiver (KT-RC2) directly to the outside of the video wall and plug it directly into the IR In terminal of Display 1 as shown below.
6. Power up all of the displays and make sure that the LAN power is on for each display. This can be found in the External Control menu.
3
QIG-TMX4P-462AVA
NEC Display Solutions of America, Inc.
UN462A-TMX4P, UN462VA-TMX4P Rev 1.1
Note that LAN power is OFF out of the box so this will need to be changed for each display within the wall.
7. Go into the Multi-DSP menu of the display 1 which will be where you first started the LAN daisy chain and enable the AUTO ID within the ID Control setting. This will automatically set a monitor ID to each display along the LAN daisy chain. Note that the displays will automatically identify each screen consecutively depending on how you LAN daisy chained the units.
If the control setup is as pictured below, each display does not need a unique IP address assigned to still control each individual monitor.
Note that a unique IP address is not necessary to communicate to all displays if display 1 is not connected to a network. The displays will automatically assign themselves IP
4
QIG-TMX4P-462AVA
NEC Display Solutions of America, Inc.
UN462A-TMX4P, UN462VA-TMX4P Rev 1.1 addresses if no DNS is detected and the IP Setting within the IP Address Setting in the
External Control menu is set to AUTO. Note that this is the setting out of the box.
8. If display 1 is connected to a network or LAN is going into display 1, like the picture below, each display will need a unique IP address to ensure that communication can successfully go through the daisy chain from screen to screen.
5
QIG-TMX4P-462AVA
NEC Display Solutions of America, Inc.
UN462A-TMX4P, UN462VA-TMX4P Rev 1.1
9. Ensure that video source is connected to the DisplayPort1 (Daisy Chain In) or the HDMI1
(Daisy Chain In) interface of display 1. Note that the DisplayPort (Daisy Chain Out) on each display can be used to output the DP1 or Option (DP) signals that are coming in to that specific display whereas the HDMI Out (Daisy Chain out) will output the HDMI1, DVI, MP and Option (TMDS) input signals. Please refer to the image below:
10. Go into the Multi-DSP menu to activate Auto Tile Matrix Setup as seen in the picture below.
Note that you will need to set the horizontal and vertical monitor dimensions before you activate the Auto Tile Matrix. If done correctly and the LAN is daisy chained as shown on the picture on the previous screen, the displays will automatically adjust so one large picture
6
QIG-TMX4P-462AVA
NEC Display Solutions of America, Inc.
UN462A-TMX4P, UN462VA-TMX4P Rev 1.1 fills the entirety of the wall. Activating Auto Tile Matrix changes the Tile Matrix, Tile Matrix
Mem, Input Signal, Video Out Setting and DisplayPort in the Terminal Settings menu.
Note that there is a limitation if High-bandwidth Digital Content Protection (HDCP) is utilized. If inputting HDCP protected content through the HDMI, DP, DVI, or OPTION terminal the content will be limited to the number of displays it will daisy chain to.
Please refer to the charts below.
Maximum number of Daisy Chain screens out via DisplayPort
Input/OSD fucntion Signal HDCP Screens Notes
DP1.1a SST
DP1.1a SST
Full HD
Full HD w/o HDCP
HDCP1.x
100
4
DP1.2
DP1.2
MST
MST
DP1.1a SST
DP1.1a SST
DP1.2
DP1.2
MST
MST
DP1.2
DP1.2
DP1.2
DP1.2
SST
SST
MST
MST
Full HD
Full HD
UHD (30)
UHD (30)
UHD (30)
UHD (30)
UHD (60)
UHD (60)
UHD (60)
UHD (60) w/o HDCP
HDCP1.x w/o HDCP
HDCP1.x w/o HDCP
HDCP1.x w/o HDCP
HDCP1.x w/o HDCP
HDCP1.x
Maximum number of Daisy Chain screens out via HDMI
Input/OSD function Resolution HDCP
HDMI
HDMI
HDMI mode1 mode1 mode1
Full HD
Full HD
Full HD w/o HDCP
HDCP1.x
HDCP2.2
HDMI
HDMI
HDMI
HDMI
HDMI mode1 mode1 mode1 mode2 mode2
UHD (30)
UHD (30)
UHD (30)
UHD (60)
UHD (60) w/o HDCP
HDCP1.x
HDCP2.2 w/o HDCP
HDCP1.x
HDMI
DVI/OPS
DVI/OPS
DVI/OPS
DVI/OPS
MP mode2
-
-
-
-
-
UHD (60)
Full HD
Full HD
UHD (30)
UHD (30)
Full HD
HDCP2.2 w/o HDCP
HDCP1.x w/o HDCP
HDCP1.x w/o HDCP
Screens
4
4
60
4
1
1
60
4
1
1
9
8
Note
5
9
8
5
9 *Not available TileMatrix
8 *Not available TileMatrix
5 *Not available TileMatrix
9
8
9
8
9
7
QIG-TMX4P-462AVA
NEC Display Solutions of America, Inc.
UN462A-TMX4P, UN462VA-TMX4P Rev 1.1
If you are experiencing issues with this setup, please call our Technical Support number at
(800) 632-4662
8
advertisement
Related manuals
advertisement