PowerG FB603-1 2000W PRESSURE WASHER Owner's Manual

TLowerG"
HIGH PRESSURE WASHER
FB603-1
O CAUTION
Before using your high pressure washers, please read this manual
carefully to understand the proper use of your unit.
Keep this manual handy.
Customer Helpline
Sumec Europe GmbH 0844 856 0793
Hanns-Martin-Schleyer-Str. 18a
47877 Willich / Germany
Made in China — a C € — O ASE &
HIGH PRESSURE WASHER CONTENTS
ELITE LE
Description of SYMDOIS........................rsrerarerarrare are nare nee rare rare nee mare nant nana aan nan e nan e ea 03
General Safety INStrUCtIONS.......................….....…rercracrarearenarraren aan nane ner n aan nane nan e aan anne ane aan e aa cn nren ne 04
Description of Product Parts.......................eeeeeescerecereeccenecenececee eee eee eee eee. 05
Scope DC eaa nan caen a aan nan caen nana nca nc aee0S 06
Intended ÜSe.are RAR KRRRRKRRRRKRRRERKRRRERKRRRERRRRRERRRREERKKRRERKRREERRKREERAKKRERKKRKERRKKKERRKKEG 06
(11-110 | TT 06
(O).]-]r-(1(0] | RER ARRERARRARRARRARARRARKARRARRRRARKARRARRARARKARRARKARARRARKARKKARRKERRKRRRRKEELKALKARERRELKELKEG 07
Application..…....….................srcrerenereneenane are ner nane are rare nee ane naar a nec a aan rente ae en are canne ane a ae e a aan ea acc nana 08
Technical Data.…...…......................crceeesereeeeeserarenasre eee ner area e serre eee e eee e ee sea eee rene e ae eee ere eee 09
MaintenancCE.….....….......….........essrrrecesesrrren ee srre cree area eee are eee n een encens arr ee eee eee acer en eee 09
Guarantee and SeErViCE....….......…..................…...…..crccecesrrecenserare ne srre cena rar ee ea ren eee san annee recense 11
CE Declaration..……................….......ccrssrrrecesserra eee srr eee en arr eee aaee rene aa recenser rene a eee e near recenser ane 12
TowerG
Assembly instructions Assembly instruction
)
Parts description
15
01 IRowerG"
FowerG" 02
> ©
el
;
|>
Ar
X ©
ORIGINAL INSTRUCTIONS
DESCRIPTION OF SYMBOLS
IMPORTANT
Please read all of the safety and operating instructions carefully before using this
tool. Please pay particular attention to all sections of this user guide that carry
warning symbols and notices.
Danger!
This is a warning symbol. This symbol is used throughout the user guide whenever there
is a risk of personal injury. Ensure that these warnings are read and understood at all
times.
Wear eye and ear protections.
Pull out the power plug immediately if the cable is damaged, has been badly twisted or
is completely cut through and in the event that the device is left unattended for a short
time.
Never direct the water jet at people, animals, the unit or electric components.
Warning symbol: Appliance not suitable for connection to the potable water
mains
Water that has flown through backflow preventers is considered to be non-potable.
The appliance is not intended to be connected to the potable water mains. If necessary,
please use only inlet hose-set approved by IEC 61770.
Waste Disposal and Environmental Protection!
Be environmentally friendly. Return the tool, accessories and packaging to a recycling
centre when you have finished with them.
Electrical machines do not belong in domestic waste.
Take the equipment to a waste disposal site. The plastic and metal parts that are used
can be separated out into pure grade, which allows recycling.
03 FzowerG"
ORIGINAL INSTRUCTIONS
Notes on safety
This section deals with the basic safety regulations to be observed when working with the electric high
pressure washer.
Read the following safety instructions to avoid damage or injury to persons or property.
IY GENERAL SAFETY INSTRUCTIONS
A
WARNING!
Before working with the equipment, familiarize yourself with all operating components.
Practice handing the equipment and have the function, operation and working methods
explained to you by an experienced user or specialist. Ensure that you can shut off the
equipment immediately in an emergency. Inappropriate use of the device may result in
serious injury.
1) Observe all safety instructions! Failure to do so may cause harm to you and others.
2) Retain all instructions for use, and safety instructions for the future.
3) Children should be kept at a distance from the machine. Keep the machine out of
the way of children and other unauthorized persons.
4) Always ensure that a machine which has been switched off cannot be restarted
unintentionally.
5) All parts of the machine, especially safety devices, must be properly installed to
ensure proper operation.
6) Retrofitting or making any unauthorized changes to the machine, as well as the
use of unapproved parts are prohibited.
WARNING!
The safety devices and personal protective equipments are for the protection of your own
health and the health of others and they ensure fault-free operation of the equipment.
1) Use only hoses, fittings and couplings supplied and recommended by the
manufacturer.
2) Never carry the equipment by the cable and never carry the equipment by the
hose. Do not carry the equipment with your finger on the On/Off switch when it is
connected to the mains.
3) Remove the plug from the plug socket if you are not using the equipment, when
transporting it or when it is left unattended, when checking the equipment,
cleaning it or removing blockages, when undertaking cleaning or maintenance
work or changing accessories, if the power or extension cable is damaged, after
contact with foreign bodies, or in the event of abnormal vibration.
4) Do not attempt to repair the equipment yourself. All work not indicated in these
instructions is to be carried out only by service stations authorized by us.
FowerG" 04
ORIGINAL INSTRUCTIONS
5) Do not carry the equipment by the cable. Do not use the cable to pull the plug from the plug
socket. Protect the cable against heat, oil and sharp edges.
6) Do not use the equipment near flammable liquids or gases. In case of non-observance, there
is a risk of fire of explosion.
7) Do not use the pressure washer if a supply cord, safety devices, hoses, switch or trigger
gun is damaged.
8) If an extension cord is used, the plug and socket must be of watertight construction.
Inadequate extension cords can be dangerous.
9) The operator or user is responsible for accidents or damages to other people or their
property.
10) Store the equipment in a dry location and out of the reach of children.
11) Handle the equipment with care. Keep the equipment clean for safer and more efficient
working. Follow the maintenance directives.
Protection against Electric Shocks
1) Ensure that the mains voltage matches the information of the label.
2) Where possible, connect the equipment only a plug socket with a leakage-current-operated
circuit breaker, with a rated current of not more than 30 mA.
3) Protect the equipment against humidity. The equipment must not become damp and is not to be
operated in a damp environment.
4) Before each use, check the equipment, power cable and plug for damage, avoiding body
contact with grounded parts (e.g. metal fences, metal posts).
5) Protect the extension cord coupling from splashed water, ensuring that it is made of rubber
or sheathed in rubber. Use only extension cords that are designed for outdoor use and marked
accordingly. The area of the flexible lead cross-section of the extension cord must be at least
1.0 mm°. Always roll out a cable drum completely before use. Check the cable for damage.
6) Keep the cable away from the field of action and run it out behind the operator.
7) Use the cable attachment device provided to fix the extension cord.
8) Damaged cables, coupling and plugs or connecting leads that are not compliant with
specifications are not to be used. Remove the plug from the plug socket immediately in case of
damage or cutting through of the mains cable.
9) Do not use the equipment when the switching action of the On/Off switch is impaired. Have
damaged switches replaced at our Service Centre.
10) Do not overload your equipment. Work only within the indicated range of performance. For
heavy work, do not use a machine with insufficient power. Do not use your equipment for purposes
other than those specified.
E DESCRIPTION OF PRODUCT PARTS (FIG. 15)
On/Off switch
water inlet
built-in detergent bottle
retractable handle
OR.
05 ILowerG"
ORIGINAL INSTRUCTIONS
cable/hose hook
trigger gun
wheel
water outlet
safety lock-off button
spray lance
hose
сан ом
— ©
E SCOPE OF DELIVERY
Carefully remove the machine from its packaging and check as the following parts are completed:
high pressure washer
* 1 pc trigger gun
5m hose
* 1 pc spray lance
* 1 pc nozzle pin
* operating manual
If any parts are missing or damaged, please contact with your dealer.
EY INTENDED USE
The machine is intended for cleaning buildings, facades, terraces, footpaths, garden equipment,
machinery, vehicles, tools, etc. with a high-pressure water jet. If required, you can also use the
machine with added cleaning agents. The machine is not intended for industrial use. The machine must
be operated in accordance with the details provided in these instructions. Any use of the machine that
deviates from its intended use and is not included in these instructions is considered unauthorized use
and relieves the manufacturer from his or her legal liability.
E ASSEMBLY
/N WARNUNG!
Pull out the power plug before carrying out any work on the equipment, and use only
original parts.
Fit the lance and spray gun.
Screw the end of the hose firmly onto the trigger gun. Tighten the screw with a 17mm
spanner (not supplied). (Fig1, 2)
FzowerG" 06
ORIGINAL INSTRUCTIONS
ORIGINAL INSTRUCTIONS
A
Connect the pressure hose and pressure washer. (FIG 3, 4)
Screw the hose (11) firmly onto water outlet (8) to make sure there is no water leak.
NOTE: Tighten the connector by hand only.
Water supply
The following accessories are required for connecting the machine (not included):
* a fabric-reinforced hose with a minimum diameter of % inches (13 mm)
* a coMmmercially available coupling
Slip the water hose onto the coupling piece of the machine and connect it to the water
tap. And then, connect the coupling with male coupler. (FIG 7)
WARNUNG!
The temperature of the incoming water supply must not exceed 60 $.
Mains supply
Open the water inlet.
Insert the mains plug into the socket.
E OPERATION
A
WARNUNG!
Wear suitable clothing, ears and eyes protecting when working with the equipment.
Ensure that the equipment is functional before each use. Ensure that the mains
voltage value matches the label on the equipment. Check the safe condition of the
machine:
— Check it for visual defects.
— Check that all parts of the machine have been securely fitted.
— Check if the water connector and the high-pressure pipes are tight.
Starting and stopping
Note: put the high pressure washer on a level ground. Stand in a secure and stable
position.
Starting:
— Open the water inlet.
— To switch the machine on, set the On/Off switch (1) to 1. (FIG 11).
— Press the safety lock-off button (9), and clutch the trigger. (FIGS, 6)
07 TRowerG"
Stopping:
— Release the trigger, and replace the safety lock-off button (9).
— To switch the machine off, set the On/Off switch (1) to O.
— Close the water inlet.
Attention!
Risk of machine damage!
Never operate the machine without water inlet as dry running may damage the pump.
Use a water filter if the inlet water is contaminated.
Working with the Electric High pressure washer
Risk of serious or fatal injury!
Use special care when cleaning tyres. Vehicle tyres/tyre valves may become damaged or
burst when handled improperly. First signs of damage included discolorations on the tyre.
Damaged vehicle tyres/tyre valves could pose a life-threatening risk. Keep the jet at a
distance of at least 30 cm!
Risk of serious or fatal injury!
The high-pressure jet may be dangerous when handled improperly. The jet may not be
directed towards living beings (persons, animals), live equipment or the machine itself.
E APPLICATION
High pressure working.
Hold the hand-held spray gun and the jet tube firmly with both hands. Be aware of the
recoil when switching on the high-pressure jet.
Press the safety lock-off button (9) and press the trigger on the handheld spray gun.
The high-pressure pump starts running as soon as you operate the hand-held spray gun.
The high-pressure pump stops running as soon as you release the trigger on the
hand-held spray gun.
Switch the machine off when interrupting your work for extended periods of time.
Screwing the spray nozzle will change the shape of water flow, it is recommended to do
this when the machine is off. (FIG 12)
Use the detergent bottle.
Stop the machine.
Only use detergent that is recommended for pressure washers.
Add suitable detergent to the bottle. (FIG 14)
Pull the nozzle out to use low pressure water. (FIG13)
FzowerG" 08
ORIGINAL INSTRUCTIONS
E TECHNICAL DATA
Model FB603-1
Input voltage rating 230V-240 V, 50 Hz
Input power 2000W
Working pressure 90bar
Max pressure 135bar
Flow rate 330L/H
Weight 8.5kg
Safety class IPX5, II
N. MAINTENANCE
Overview of cleaning
Clean the machine. Wipe the unit with a slightly damp cloth. Do not clean the machine
using a high-pressure water jet. Clean the high-pressure jet nozzle.(FIG 16)
FIG 16
Maintenance
The machine is maintenance-free.
Storing, transport
Storing
Store the machine where it is dry and well ventilated.
When placing the machine out of service for an extended period of time, remove the cleaning agent
and drain all the water left in the hoses.
Transport
If shipping, use the original packaging wherever possible.
09 FlzowerG"
ORIGINAL INSTRUCTIONS
Disposal
Disposing of the machine
Machines which are labeled with the adjacent symbol must not be disposed of in household rubbish.
You must dispose of such old electrical and electronic appliances separately.
Please check with your local authority about the possibilities for correct disposal. Through separate
disposal you send old equipment for recycling or for other forms of re-use. You will thus help to avoid
in some cases that damaging material gets into the environment.
Disposing of the packaging
The packaging consists of cardboard and correspondingly marked sheets that can be recycled. Make
these materials available for recycling.
Troubleshooting
1) No power.
- Check the plug socket, cable, line and plug, where appropriate, have repaired through electrical
specialist.
- Any of the parts are defective, such as On/Off switch / motor etc. (contact our customer
helpline 0844 856 0793).
2) The high pressure washer operates intermittently.
- Power cable is damaged.
- Internal loose electrical connection.
- On/Off switch defective (contact our customer helpline 0844 856 0793).
3) No or only little pressure is built up.
- Check if there is any air in the system, if so, please ventilate the machine! Run the machine
without the high-pressure hose connected until water starts leaking without bubbles. Re-attach
the high-pressure hose.
- Check all inlet pipes leading to the pump for leaks or clogs.
- Check the setting on the hand-held spray gun.
4) Different pressure varieties.
- Clean the high pressure jet nozzle
- Check the water inlet pressure.
TowerG" 10
ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS
5) Detergent is not working.
- Detergent container is empty. Add more detergent.
- Detergent bottle or suction tube not properly connected. Check connections. M E
- Detergent is too thick. Dilute detergent. U
- Damaged or clogged detergent suction tube. Remove obstruction or replace detergent suction
tube. Declaration of Conformity
- Nozzle is in high-pressure position. Use low pressure. We
- Discharge nozzle is obstructed. Blow out or remove debris with a fine needle SUMEC Hardware & Tools Co., Ltd.
198 ChangJiang RD., Nanjing, CHINA
6) Machine is leaking. Declare that the product
- Please contact our customer helpline 0844 856 0793.
High pressure washer
Model No: FB603-1
E GUARANTEE AND SERVICE
Complies with the essential health and safety requirements of the
After purchase date, a full 1 year guarantee applies to material and production defects. If the product following directives:
shows defects as a result of material and production defects during the period of guarantee, we
2004/108/EC ----EMC Directive
guarantee free repair on condition that: the product has been used properly and for the purpose for L
o 2006/95/EC ----Low Voltage Directive
which it has been intended. The accessories are not covered by the guarantee. oo
If you have any problems or questions concerning the machine, please contact our customer 98/37/EC ----Machinery Directive
helpline 0844 856 0793.
Standards and technical specification referred to:
EN60335-1:2002+A1+A11+A12+A2+A13
EN62233:2008 EN61000-3-2:2006
EN60335-2-79:2009 EN55014-2:1997+A1
EN55014-1:2006 EN61000-3-11:2000
Authorized Signatory
Date: 2010-01-06
Signature: Ca Fi Bo
Name: Cai Ji Bo
General Manager
SUMEC Hardware & Tools Co.,Ltd.
Doc 201000024/GT
11 TZowerG" HowerG" 12