Qualcast
26cc Petrol Hedge Trimmer
Instruction Manual SLK26B
Technical Support & Parts
01904 727500
Mon-Fri 9am-5pm Sat-Sun 11am-4pm www.gardenservicecentre.co.uk
Scan to watch our new instruction videos!
Important
- Please read these instructions fully before operating or maintaining your hedge trimmer .
These instructions contain important information that will help you get the best from your chainsaw, ensuring it is assembled correctly and safely. If you need help or have damaged or missing parts, call the Customer Helpline on 01904 727500 prior to returning the product to store.
Oct 2017 Rev B
2
Contents
Safety Information .............................................................................................................................................3
Warning Symbols ..........................................................................................................................................3
General Safety ..............................................................................................................................................4
Preparation ...................................................................................................................................................4
Operation ......................................................................................................................................................4
Maintenance and Storage ...........................................................................................................................7
In the Box ......................................................................................................................................................8
Preparing to Operate the Hedge Trimmer ....................................................................................................9
Step 1 - Filling with Engine Fuel ...................................................................................................................9
Operating the Hedge Trimmer ..........................................................................................................................9
Step 1 - Removing the blade protector ......................................................................................................10
Step 2 - Starting the Engine .......................................................................................................................10
Step 3 - Change rear handle position ........................................................................................................11
Step 4 - Trimming .......................................................................................................................................11
Stopping ..........................................................................................................................................................12
Cleaning the Air Filter ......................................................................................................................................13
Replacing the Spark Plug ...............................................................................................................................13
Storing the Hedge Trimmer .............................................................................................................................14
Step 1 - Storing the Hedge Trimmer for Short Periods .............................................................................14
Step 2 - Storing the Hedge Trimmer for Extended Periods .......................................................................14
Maintenance ....................................................................................................................................................14
Maintenance Schedule ..............................................................................................................................14
Troubleshooting ..............................................................................................................................................15
Technical Data .................................................................................................................................................16
Disposal...........................................................................................................................................................16
Getting Help ....................................................................................................................................................17
Guarantee .......................................................................................................................................................17
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
Safety Information
Important - Please read these instructions fully before operation or maintenance
Warning Symbols
The following warning symbols appear through this manual and indicate the appropriate safety measures you should take when operating and maintaining the hedge trimmer.
Before any use, refer to the corresponding paragraph in the present manual.
This symbol, before a safety comment, indicates a precaution, a warning or a danger.
Ignoring this warning can lead to an accident for yourself or for others. To limit the risk of injury, fire, or electrocution, always apply the recommendations indicated.
Conforms to European standards.
The exhaust gas is poisonous and asphyxiating. If inhaled, it may even be lethal. Do not operate the engine in closed or poorly ventilated places.
Petrol and petrol vapours are extremely flammable.
Do not touch to prevent burns.
Keep fingers away from moving cutting device!
Wear hearing protection and eye protection (PPE) when using the device.
Wear robust footwear when using the device.
Wear protective gloves when using the device.
108
L
WA dB
Guaranteed sound power level.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
3
Safety Information
Important - Please read these instructions fully before operation or maintenance
General Safety
WARNING!
- Keep this operating and maintenance manual in a safe place for reference at a later date.
- Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.
- Never allow children or people unfamiliar with these instructions to use the hedge trimmer. Local regulations can restrict the age of the operator.
- Never trim while people, especially children or pets, are nearby. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Do not touch the blade.
Personal Safety
4
WARNING!
- Never start or run the engine in a closed or poorly ventilated area; breathing exhaust fumes can kill.
- Clear the work area before each use. Remove all objects, such as rocks, broken glass, nails, wire, or other such deris, which can be thrown or become entangled in the cutting line or blade.
- Wear Personal Protective Equipment (PPE), such as safety glasses or goggles, when operating this unit.
- Wear heavy, long trousers, boots, and gloves. Do not wear loose fitting clothing, shorts, or go barefoot. Do not wear jewellery of any kind.
Operational Safety
WARNING!
- Be careful about the environmental conditions you work under.
When starting the motor, it will produce toxic gases. The gas can be invisible and odourless; therefore, you should never operate the machine in an enclosed or poorly ventilated area.
- When trimming, ensure that the area is well lit.
If you are trimming when it is raining, snowing or freezing on slopes, or on uneven terrain, make sure you have a stable position.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
Safety Information
Important - Please read these instructions fully before operation or maintenance
Operational Safety (continued)
- Don’t leave the machine unattended.
Visitors and onlookers, especially children and the infirm, should be kept at a safe distance from your workplace. Make sure that other people cannot access an unattended machine.
Ensure safe tool storage.
Machines that are not in use should be stored in a dry place, high up if possible, or they should be locked so that other people cannot gain access to them.
- Hedge trimmer transport.
The hedge trimmer is transported with a blade protection cover. When not in use, replace this cover to prevent accidents. Secure the machine against tilting, damage and fuel leakage.
- Remove tool keys, etc.
Before switching the hedge trimmer on, remove all keys, etc.
- Always be careful and watch what you are doing.
When working, use common sense. Do not use machinery if you are tired. Do not use the hedge trimmer under the influence of alcohol, drugs or medicines that lower the ability to concentrate.
- Fuel replenishment.
Before refuelling, switch off the engine. Carefully open the fuel cap so that excess pressure can escape slowly and the fuel does not splash. The use of the trimmer results in high temperatures. Let the machine cool down before refuelling, otherwise the fuel could ignite and people could get burnt. When refuelling, make sure the fuel tank is not over filled, to allow room for expansion. If the fuel leaks, it is important to wipe up any leaked fuel and clear the machine. After refuelling, ensure the fuel cap is sufficiently tight to prevent being loosened by the vibrations when the machine is in use.
- Usage period and breaks.
After a longer period of usage, you might experience problems with blood circulation in your hands due to the vibrations. The period of usage can be extended by wearing suitable gloves and taking regular breaks. Please be aware that the time of usage is lowered by personal dispositions to bad circulation, a low outside temperature, or a firm grip of the tool when working.
- Watch for damaged parts.
The machine should be carefully inspected before use. Are any of the parts damaged? In case of slight damage, consider if the machine is still going to work safely and without any problems. Make sure it is properly adjusted and movable parts are properly regulated. Are any elements interlocked improperly? Is everything well installed: Are all requirements for trouble-free operation fulfilled? Damaged protective devices, etc., must be repaired or replaced by the authorised service centres, unless expressly stated otherwise in the manual. Faulty switches should also be replaced in the authorised service centre. If you need to have your machine repaired, contact your nearest store.
- Make sure that the protective cover of the hedge trimmer works perfectly and it is installed in such a way that the blade teeth are always covered.
- Before adjustments or machine maintenance, switch off the engine. This is valid mainly if the cutting blade is being replaced.
- Use only approved components. During maintenance and repairs, use only identical spare parts.
Contact your authorised service centre for this purpose.
Caution!
Using different cutting blades, and other fixtures and extensions that are expressly not recommended, can endanger people and property.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
5
6
Safety Information
Important - Please read these instructions fully before operation or maintenance
Operational Safety (continued)
WARNING! The cutting blade can hurt your hands and fingers and cause life threatening injuries!
Always secure adequate lighting.
The manufacturer cannot be liable if the machine was modified or used unprofessionally, and damage arose as the result of these actions.
When handling the machine professionally, there is always some risk that cannot be eliminated. The machine type and construction might present the following potential risks: a) Contact with an unprotected cutting blade (danger of cutting yourself). b) Touching the trimmer in operation (danger of cutting yourself).
c) Unexpected, sudden movements of the cut material and its parts (danger of cutting yourself).
d) Spurning of faulty blade teeth and parts of cutting blade (danger of cutting yourself).
e) Hearing injuries if appropriate safety aids are not worn. f) Creation of harmful dust or gas when using the machine in closed premises (sickness). g) Do not use deformed or damaged cutting blades (cutting blade destruction).
- Switch off the engine before you start adjusting or maintaining the machine.
- Make this instruction manual available to everybody who is working with the machine.
- Use this machine only for trimming hedges and foliage, and cutting wood, max 22mm.
- Do not use trimmers in the vicinity of flammable fluid or gas.
- Have the machine repaired in an authorised service centre. Do not attempt to repair it yourself.
- Repairs and part replacements can be carried out only by an authorised service centre.
- Keep your workplace clean; remove trimmed waste and clear away objects you no longer require.
- Ensure a good foothold; be careful not to stumble in the vicinity of the trimmer.
- The person working with the machine should not get disturbed.
- Use only perfect cutting blades, e.g. well sharpened, without cracks, clinks, or deformations, etc.
- Faulty cutting blades should be replaced immediately.
- Never use cutting blades that do not correspond with technical data stated in this instruction manual.
- Make sure the cutting blade is installed in the right position.
- The machine’s protective device can not be disassembled or made dysfunctional in any way.
- Damaged or faulty protective devices should be replaced immediately.
- If you get disturbed when working with the trimmer, act with prudence till you adapt your attention to a new situation.
- At regular intervals, check all screws, nuts and fittings are tight enough.
- Never deposit tools or materials above the machine so that they could fall down on it.
- Make sure your hands are in the right positions, e.g. make sure they can not slide and suddenly come in contact with the cutting blade.
- The material you want to cut should not include nails or other similar foreign matters.
- Do not overload the machine so it does not slow down and get overheated.
- Never attempt to remove loose trimmings or wood fragments or jammed material when the machine is working.
- If you want to remove some defects or clean the machine of jammed pieces of wood, you must switch it off first.
- Machine adjustment, measuring, cleaning, etc., is allowed only when the engine is switched off.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
Safety Information
Important - Please read these instructions fully before operation or maintenance
Operational Safety (continued)
- Do not leave an active engine unsupervised.
- After a repair or maintenance of safety or protective devices, the devices must be reinstalled correctly in the machine.
- It is essential to know the regulations regarding accident prevention that are valid in a specific workplace, and all other generally acknowledged safety regulations.
- When working, pay attention to stability and maintain good balance.
- Check the machine on a regular basis for signs of wear and damage.
- Before using the machine, you must check safety devices. Make sure that components that might seem slightly worn or damaged still perform correctly.
- Check if all movable parts work perfectly. Concentrate mainly on the damaged and jammed components. All components must be installed properly and must comply with conditions for trouble-free operation.
- Unless stated otherwise in the instruction manual, the damaged components and safety devices should be repaired or replaced in an authorised service centre.
- Damaged switches should also be replaced in an authorised service centre.
- The machine complies with all relevant safety provisions. Repairs can be carried out only by qualified repair staff in authorised centres using original spare parts. In case of non-compliance with the provision, there is a danger of accident.
- Do not use the hedge trimmer if your concentration is lowered, after taking medication, or if you are under the influence of alcohol, or are tired.
- The machine can be used only for the intended purpose. Any machine usage at variance with its intended purpose is considered unprofessional usage.
- The user is liable for the damage caused to property and injuries resulting from this unprofessional handling, and not the manufacturer.
Maintenance and Storage
- Keep all nuts, bolts and screws tight, to be sure the equipment is in safe working condition.
- Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or spark.
- Allow the engine to cool before storing in any enclosure.
- To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area free of hedge trimmings, leaves, or excessive grease.
- Replace worn or damaged parts for safety.
- If the fuel tank has to be drained, it should be done outdoors.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
7
8
In the Box
Parts
A
Hedge trimmer
A
Tools
1
Plug wrench &
Phillips screwdriver
1 piece
2
Mixing bottle
1
40: 1
5
2.5
5
2.5
2
You will also need:
- 2-stroke oil - Unleaded fuel - Funnel
If there are any parts missing, please call the customer helpline on 01904 727500
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
Preparing to Operate the Hedge Trimmer
Step 1 - Filling with Engine Fuel
WARNING! Always shut off the engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30ft. (9m) from the refueling site before starting the engine. Do not smoke!
IMPORTANT! It is crucial that the fuel is mixed correctly - wrongly mixed fuel can cease the engine and voids the warranty. Carefully read these instructions, and use the supplied bottle for mixing. When filling the mixing bottle, use a funnel while keeping the bottle flat, to ensure a good reading.
1a 1b
A
5
40:1
B
Use matching numbers
5
This product is powered by a 2-stroke engine and requires pre-mixing of petrol and 2-stroke oil.
Mix a high quality 2-stroke engine oil according JASO FC classic. Do not use automotive oil or
2-cycle outboard oil. DO NOT mix quantities larger than usable in a 30-day period.
1a. FUEL MIXTURE: 1 Litre (1000ml) petrol and 25cc (25ml) 2-stroke engine oil (40:1 ratio)
Using the markings under the label 40:1 on the bottle and pour the fuel in the left hand side
(‘A’) up to the required level, e.g. 2.5 or 5, then fill the right hand side (‘B’) up to the same corresponding mark with oil. Please ensure that no fuel has leaked into B prior to pouring in oil.
Shake vigorously to mix the two products prior to pouring into the tank of the hedge trimmer.
NOTE: Use 5 for 500ml fuel mixture and 2,5 for 250ml fuel mixture.
1b. FILLING THE FUEL TANK
Clean the surface around the fuel cap to prevent contamination. Loosen the fuel cap slowly.
Remove and rest the cap on a clean surface. Carefully pour fuel into the tank using a funnel to avoid spillage. Prior to replacing the fuel cap, clean and inspect the seal located in the fuel cap.
Immediately replace the fuel cap and hand tighten. Wipe up any fuel spillage.
NOTE: It is normal for smoke to be emitted from a new engine after first use.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
9
Operating the Hedge Trimmer
Step 1 - Removing the blade protector
Remove the blade protector.
Step 2 - Starting the Engine
1
2
3
4
5
6
5-6
F
A
B
2a & 2b
10
2a To start a cold engine
1) Set the stop switch ( A ) into the 1 ( on) position. If starting a cold engine, the choke lever ( F ) must be moved to the “ “ position.
2) Press the primer bulb 5-6 times, the fuel can be pumped into the carburettor. This will reduce the number of start attempts after a longer break.
3) Now stand the hedge trimmer on the ground, place the left hand on the top cover. Use your right hand to pull the starter grip ( B ) quickly.
4) Once the engine attempts to run, move the choke lever ( F ) to the position.
5) Let it run for about 30 seconds then operate the hedge trimmer.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
Operating the Hedge Trimmer
Step 2 - Starting the Engine (continued)
ATTENTION!
Don’t touch the blade.
2b Starting under warm conditions
1) Set the switch ( A ) to 1 ( on).
2) Set the choke lever (
F
) to ( ).
3) Pull the starter grip ( B ) quickly until the engine runs.
Step 3 - Change rear handle position
C
Pull
Pull the handle lock switch ( C ) to enable rotation of the handle. There are 3 working positions
(0°, 90°, -90°).
Step 4 - Trimming
D
E
Depress the throttle lever lock (
D
) and throttle lever (
E
) to activate the blade.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
11
Operating the Hedge Trimmer
Step 4 - Trimming (continued)
Cleaning the Air Filter
Cleaning the air filter
12
Always start with the sides of the hedge. Guide the trimmer along an arch route up and down and keep cutting. You should be using both blade sides.
When cutting, hold the hedge trimmer at the angle of about 15° and guide it horizontally across the hedge. When cutting the top part, guide the trimmer in a sickle like movement toward the hedge edges. Cut branches will then fall on the ground.
- Do not cut hedges out of the main trimming and pruning season.
- If the branches are bigger than 22mm, they must be removed by pruning shears.
- If heavy pruning is required, you should work in stages.
Stopping
Stopping
The hedge trimmer is equipped with an automatic brake system for quick stopping which stops the blade immediately once the throttle is released, to prevent a possible accident.
If you want to switch off the machine completely, you must move the switch into the ‘OFF’ position.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
1) Loosen the screw from the air filter housing and remove the cap.
2) Remove the air filter.
3) Wash the air filter in warm water (with a small amount of detergent).
4) Rinse the air filter through with clean water.
5) Leave the air filter to dry out completely.
6) Replace the air filter.
7) Replace the cover with the lugs positioned in the notches in the air filter casing.
8) Close the lid, and tighten the bolt again by screwdriver.
Replacing the Spark Plug
Replacing the spark plug
WARNING! Always turn off the engine before performing maintenance tasks.
H=0.6-0.7 mm
1) Pull off the ignition cable plug.
2) Use the plug wrench to unscrew and remove the spark plug.
3) Insert a new spark plug and tighten it carefully with the plug wrench.
4) Snap the ignition cable plug back on.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
13
Storing the Hedge Trimmer
Step 1 - Storing the Hedge Trimmer for Short Periods
• Drain all fuel from the tank into a container approved for petrol. Run the engine until it stops.
Clean all foreign material from the trimmer. Store it in a well-ventilated place that is out of reach from to children.
• Keep away from corrosive agents, such as garden chemicals and de-icing salts.
• Abide by all ISO and local regulations for the safe storage and handling of petrol. Excess fuel should be used up in other 2-stroke engine-powered equipment or disposed of at your local recycle centre.
• Remove any coarse dirt.
• Wipe the machine with a soft, damp cloth.
Step 2 - Storing the Hedge Trimmer for Extended Periods
• All the above plus: Clean the air filter and replace the spark plug with an exact replacement.
Maintenance
Maintenance Schedule
Performing routine maintenance correctly on your hedge trimmer will ensure you get years of trouble-free use. Please keep this manual safe for future reference.
It is recommended that the following maintenance schedule is adhered to. This will ensure the hedge trimmer operates correctly and is safe to use.
Air filter
Spark plug
12 hours of use clean check
24 hours of use clean clean
36 hours of use replace replace
Blade lubrication
WARNING! Always switch off the hedge trimmer and remove the spark plug before carrying out any maintenance work.
14
Only clean the machine after it has been switched off. Use only mild soap and a damp cloth to clean it. Never allow fluid to get into the machine. Do not use caustic cleaning products.
Ensure that the blade’s cutting edge is always well oiled.
List of consumable Qualcast parts
984125
984002
984124 air filter spark plug
Fuel filter
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
These parts are available via www.gardenservicecentre.co.uk
Troubleshooting
General Troubleshooting
CAUTION!
- Always switch off the engine and pull the ignition cable before starting any inspection or adjustment work.
- Remember that the exhaust and other parts will get hot after running the engine, even if only for a few minutes.
The following table provides solutions to common problems encountered with the hedge trimmer.
Fault
Engine not starting
Engine runs too fast when idle
Engine does not reach its maximum speed
Engine would not stop
Possible Cause
1. Empty tank
Solution
1. Fill up
2. Flooded engine
2. Fouled carburettor or its jets
3. Fouled air filter
2. Close the throttle, pull cord several times. If required, take out the spark plug and dry it
3. Fouled spark plug (remains of carbon on the electrodes)
3. Clean the spark plug, check its temperature, replace if needed
4. Electrode gap too large 4. Adjust at 0.6-0.7 mm
5. Fouled carburetor or its jets 5. Clean the carburetor with air
6. Damaged spark plug connection or damaged spark plug
6. Replace the spark plug.
1. Cold engine
1. Fouled spark plug (remains of carbon on the electrodes) spark gap to large
1. Warm up slowly; alternatively, close the choke a bit
1. Clean the spark plug, check its temperature, replace if needed. Adjust at 0.6-.07 m
2. Clean the carburettor with air
4. Exhaust, exhaust channel
5. Sealing ring in crankcase not sealing properly
3. Clean
4. Take out the exhaust and clean it, remove remains of carbon
5. Replace
6. Worn cylinders, pistons and piston rings
7. Wrong fuel mix (too much oil)
8. Bad ignition
6. Replace the cylinder, piston or piston rings, replace the cylinder and piston, assembly
7. Fill up according to the instructions
1. The switch was failed
8. Adjust the ignition coil gap
(0.3-0.4mm)
1. Change the switch
2. The wiring terminal was disconnected
2. Connect up the wiring terminal
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
15
16
Technical Data
Technical Data Table
Property
Engine type
Displacement (cc)
Max. power/engine speed
Tank capacity
Idle speed
Clutch speed
Ignition
Cutting length
Fuel ratio (petrol: 2 cycle motor oil)
Net weight
Sound pressure level L
PA
Sound power level L
WA
Vibration (m/s 2 )
(dB)
(dB)
Spark type
Value
Single-cylinder, 2-stroke
26 cm 3
0.75 kW/8000 min -1
460ml
3000min -1
4000min -1
C.D.I
550mm
40:1
5.3kg
95.8 dB K=2.32 dB(A)
108 dB
Front handle 7.512m/s 2 ; rear handle 3.378m/s 2
L8RTC
Disposal
Disposal Instructions
The hedge trimmer and its accessories are made of various recyclable materials. Dispose of the hedge trimmer in accordance with your local recycling regulations, not with household waste.
Getting Help
Customer Helpline 01904 727500
Our dedicated UK based customer helpline is open 7 days a week to assist you with assembly, parts queries and technical support. We are open during office hours but you can always send an email via [email protected]
. Our experts are here to get you back enjoying your garden in no time.
For useful assembly, starting and maintenance videos, and for ordering spares, please visit www.gardenservicecentre.co.uk.
Calling our service does not affect your statutory rights.
UK/Ireland 01904 727500
Monday to Friday: 9am – 5pm. Saturday & Sunday: 11am – 4pm www.gardenservicecentre.co.uk
email: [email protected]
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
Warranty
Warranty
Any claim under this warranty must be made within 12 months of the date of purchase. To make a claim under the warranty, take the product (with proof of purchase) to your local store.
HHGL Limited bears reasonable, direct expenses of claiming under the warranty. You may submit details and proof to our store for consideration. The warranty covers manufacturer defects in materials, workmanship, and finish under normal use.
This warranty is provided in addition to other rights and remedies you may have under law: our goods come with guarantees, which cannot be excluded under the UK Consumer Rights Act
2015.
You are entitled to a replacement or refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The warranty excludes damage resulting from product misuse or product neglect. The warranty covers domestic use only and does not apply to commercial applications.
This warranty is given by HHGL Limited, Witan Gate House, 500-600 Witan Gate, Milton Keynes,
MK9 1BA.
Customer Helpline 01904 727500 www.gardenservicecentre.co.uk
17
