NXM36
CAMERA HOUSING FOR INSTALLATION IN AGGRESSIVE ENVIRONMENTS
NXM36 + VIPNX
DESCRIPTION
The NXM36 housing has been developed for installations in highly corrosive areas such as industrial chemical, petrochemical, marine, naval and offshore platforms; entirely made from electropolished and passivated AISI 316L stainless steel for maximum protection against deterioration.
The IP66/IP67/IP68/IP69 level guarantees complete protection against bad weather and water immersion.
The options of wiper and water pump ensure a constant cleaning of the front window
For the coldest environments down to -40°C (-40°F), the range includes a specific version with reinforced heater.
The NXM36 housing can be installed on NXPTH Pan & Tilt head, to obtain a complete positioning system.
The NXM36 product is Lloyd's Register Type Approval System Test Specification Number 1 certified and therefore can be used in Marine and Offshore applications for environmental categories ENV1, ENV2, ENV3 and ENV5 (eg. passenger ships, open-air decks, closed spaces and technical areas that may be subject to heat generated by other equipment, docking procedures).
CERTIFICATIONS
MAIN FEATURES
Made of AISI 316L electropolished stainless steel
Cylindrical body enclosed by two 6mm(0.24in)-thick circular flanges
2 PG13.5 cable glands in nickel-plated brass for external connections
IP66/IP67/IP68/IP69
Marine Certification: Lloyd's Register Marine Type Approval
Available accessories: heater and double heater (for temperatures down to -40°C
(-40°F), camera power supply, wiper and washer pump
WWW.VIDEOTEC.COM - DATA SHEETS
NXM36_EN_2020-06-05
Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trademarks or registered trademarks.
TECHNICAL DATA
MECHANICAL
Housing manufactured in polished stainless steel (austenitic stainless alloy steel resistant to corrosion and heat):
• AISI 316L
• UNI 6900-71: X 2 Cr Ni Mo 17 12 2
• DIN 17006: X 2 Cr Ni Mo 17 13 2
• N° werkstoff: 1.4404
• AFNOR: Z2 CND 17-12
• BSI: 316S11
The screws utilised are in austenitic alloy stainless steel, corrosion and heat resistant according to the following standards:
• ISO: 7380
• AISI: 316
• ISO quality: A4
Internal usable area (WxH): 88x86mm (3.5x3.4in)
Internal usable area (with double heater) (WxH): consult the technical drawing
Internal usable length (without accessories): 334mm (13.1in)
Internal usable length (with heater and/or power supply): 245mm (9.6in)
External dimensions (ØxL): 154x358mm (6.1x14.1in)
Cable glands: 2xPG13.5 (nickel-plated brass for external connections)
Flange thickness: 6mm (0.24in) (front/back)
Gaskets: High sealing O-ring
Housing window
• Material: Tempered extra clear glass
• Usable diameter : 97mm (3.8in)
• Thick: 4mm (0.16in)
Unit weight: 5kg (11lb)
ELECTRICAL
Supply voltage/Current consumption (version with heater, Ton 15°C±3°C (59°F ±5°F), Toff
22°C±3°C (72°F±5°F)):
• 12Vdc, 1.6A max
• 24Vac, 0.85A max, 50/60Hz
• 120Vac, 0.35A max, 50/60Hz
• 230Vac, 0.18A max, 50/60Hz
Supply voltage/Current consumption (version with double heater, Ton 15°C±3°C (59°F
±5°F), Toff 22°C±3°C (72°F±5°F)):
• 120Vac, 0.7A max, 50/60Hz
• 230Vac, 0.35A max, 50/60Hz
Camera power supply
• IN from 100Vac up to 240Vac, 50/60Hz - OUT 12Vdc, 1.25A
• IN 230Vac, 50Hz - OUT 24Vac, 50Hz, 400mA
ENVIRONMENT
For indoors and outdoors installation
Submersible: up to -40m (-130ft) (pressure: 4bar)
Operating temperature (with heater): from -20°C (-4°F) up to +60°C (140°F)
Operating temperature (with double heater): from -40°C (-40°F) up to +60°C (140°F)
Relative humidity: from 5% up to 95%
CERTIFICATIONS
Electrical safety (CE): EN60950-1
Electromagnetic compatibility (CE): EN50130-4, EN61000-6-3
IP protection degree (EN60529): IP66, IP67, IP68, IP69
EAC certification
CERTIFICATIONS - MARINE APPLICATIONS
Lloyd's Register Marine Type Approval certification (PoE versions excluded):
• Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5)
Electromagnetic compatibility: EN60945
Salty fog resistance: EN60068-2-52
Tested at 70°C (158°F) for 16 hours in compliance with EN60068-2-2
ACCESSORIES
NXCTPG13SS
OHEH06B
OHEH05B
ONXPS1B
Kit of 2xPG 13.5 stainless steel cable glands IP68 for stainless steel housings.
Heater 120/230Vac
Heater 12Vdc/24Vac
Wide range power supply for camera IN 100-240Vac - OUT 12Vdc,
1.25A
ONXPS2B
VIPNX1C
Camera power supply IN 230Vac - OUT 24Vac, 400mA
230Vac stainless steel wiper for NXM housing
VIPNX2C 24Vac stainless steel wiper for NXM housing
WAS0V5L5M00 Water tank 5l (1.3gal), pump with delivery up to 5m (16ft), IN
230Vac-24Vac-120Vac
WAS0V23L5M00 Water tank 23l (6gal), pump with delivery up to 5m (16ft), IN
230Vac-24Vac-120Vac
WAS0V23L11M00 Water tank 23l (6gal), pump with delivery up to 11m (36ft), IN
230Vac-24Vac-120Vac
WAS1V23L30M00 Water tank 23l (6gal), pump with delivery up to 30m (98ft) with water floating, IN 230Vac
WAS3V23L30M00 Water tank 23l (6gal), pump with delivery up to 30m (98ft) with water floating, IN 120Vac
WASPT0V5L5M00 Water tank 5l (1.3gal), pump with delivery up to 5m (16ft), IN
230Vac-24Vac-120Vac
WASPT0V23L5M00 Water tank 23l (6gal), pump with delivery up to 5m (16ft), IN
230Vac-24Vac-120Vac
WASPT0V23L11M00 Water tank 23l (6gal), pump with delivery up to 11m (36ft) with water floating, IN 230Vac-24Vac-120Vac
WASPT1V23L30M00 Water tank 23l (6gal), pump with delivery up to 30m (98ft) with water floating, IN 230Vac
WASPT3V23L30M00 Water tank 23l (6gal), pump with delivery up to 30m (98ft) with water floating, IN 120Vac
DTWRX Data receiver for remote control of the wiper and WASPT range pumps in stand-alone housings
WASNX1V10L20M00 Tank 10l (2.6gal) with integrated manual pump controlled by solenoid valve, delivery head up to 20m (66ft) max, IN 230Vac
WASNX2V10L20M00 Tank 10l (2.6gal) with integrated manual pump controlled by solenoid valve, delivery head up to 20m (66ft) max, IN 24Vac
WASNX3V10L20M00 Tank 10l (2.6gal) with integrated manual pump controlled by solenoid valve, delivery head up to 20m (66ft) max, IN 120Vac
WWW.VIDEOTEC.COM - DATA SHEETS
NXM36_EN_2020-06-05
Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trademarks or registered trademarks.
BRACKETS AND ADAPTORS
NXWBS1 AISI 316L stainless steel wall bracket with joint
NXCOL
NXCW
NXWTU
MHXWFWCA
MHXWBS
AISI 316L stainless steel pole adapter module
AISI 316L stainless steel corner adapter module
Wall adaptor module in stainless steel AISI 316L
AISI 316L stainless steel ball joint
AISI 316L stainless steel wall bracket
RELATED PRODUCTS
NXPTH Stainless steel P&T motor
SPARE PARTS
ONXM36MAN
OSPAVIPNXMC
PACKAGE
Model Number
NXM36K1000
VIPNX
Maintenance kit for NXM36
Complete blade for VIPNX wiper
Weight Dimensions (WxHxL)
6.4kg (14lb) 29.5x19.5x49cm (11.6x7.7x3.8in) -
Master carton
1.9kg (4.2lb) 14.5x15x27cm (6x6x11in) 15
B - B
USABLE
AREA
88
USABLE
AREA
B - B
NXM36
55
AVAILABLE MODELS
Model Number
NXM36D0000
NXM36K1000
NXM36K1050
NXM36K2000
Sunshield
√
√
–
√
TECHNICAL DRAWINGS
The indicated measurements are expressed in millimetres.
POWER SUPPLY
245
A
Heater 120Vac/230Vac
–
–
–
√
A
Ø 112
184
88
BOARD
USABLE AREA
A - A
342
346
460
B
Heater 12Vdc/24Vac
–
√
–
–
FIXING BASE
130
M5
358
VERSION WITH DOUBLE HEATER
93
B 115
√
–
–
–
Double heating
120Vac/230Vac
Max consumption
–
40W
80W
20W
WWW.VIDEOTEC.COM - DATA SHEETS
NXM36_EN_2020-06-05
Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trademarks or registered trademarks.
