Your washing machine

Congratulations ä you have opted for a modern, high-quality domestic appliance manufactured by Bosch. This washing machine is distinguished by its economical water and energy consumption.

Each machine that leaves our factory is inspected thoroughly to ensure that it functions properly and is in perfect condition.

For more information on our products, accessories, replacement parts and services, see our website www.bosch-home.com

or contact our after-sales service centres.

Contents

Page ʋ Intended use ...................................................................................... 1 ʋ Programmes ...................................................................................... 1 ʋ Setting and adjusting the programme .......................................... 3 ʋ Washing .......................................................................................... 3/4 ʋ After washing ..................................................................................... 4 ʋ Individual settings ......................................................................... 5/6 ʋ Overview of programmes ................................................................ 7 ʋ Safety instructions ............................................................................. 8 ʋ Consumption values ......................................................................... 8 ʋ Important information ....................................................................... 9 ʋ Insert for liquid detergent .............................................................. 10 ʋ Care ................................................................................................... 10 ʋ Information on the display panel ................................................. 10 ʋ Instructions for blockages ............................................................. 11 ʋ What to do if...................................................................................... 12 ʋ Emergency release .......................................................................... 13 ʋ After-sales service............................................................................ 13

Protection of the environment/Conservation tips

– Always fill the washing machine with a maximum amount of laundry for the relevant programme.

– Wash normally soiled laundry without a prewash.

– Instead of

LF

Cottons 90 °C , select Eco 60 °C and the

º

Intensive additional function. Comparable cleaning result with significantly lower energy consumption. Measure the detergent according to the manufacturer's instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select the appropriate spin speed according to the instructions of the dryer manufacturer .

Intended use

ʋ For domestic use only ʋ For machine-washable fabrics and hand-washable wool in detergent solution ʋ

To be operated with cold drinking water and commercially available detergents and care products which are suitable for use in washing machines

– Do not leave children unattended near the washing machine.

– The washing machine is not to be used by children or persons not familiar with the operating instructions.

– Keep pets away from the washing machine.

Preparation

Correct installation according to the separate Installation instructions.

Check the machine

– Never use a damaged machine.

– Inform the after-sales service.

Connect the mains plug

– Make sure your hands are dry.

– Take hold of the plug only.

Turn the tap on

Insert for liquid detergent (depending on model), page 10 .

Compartment II : detergent for main wash,

water softener, bleach, stain remover

Compartment

~

: fabric softener, starch

Compartment I : Detergent for prewash

Additional functions

Spin speed

Status indicators

Before washing for the first time

Run a wash cycle without any laundry a page 9

Sorting and loading the laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load a page 7 .

Observe the important information a

page 9.

Insert items of laundry of varying sizes.

Close the washing machine door. Take care not to trap items of laundry between the washing machine door and the rubber seal.

Adding detergent and care products

Measure accordingly:

Amount of laundry, level of soiling, water hardness (ask your water supply company) and manufacturer's instructions.

Models without insert for liquid detergent:

Pour liquid detergent into the appropriate dispenser and place in the drum.

During operation: Open the detergent drawer with care.

Dilute thick fabric softener and care products with water.

This prevents blockages.

Programme selector

Set and adjust the programme

Start/

Pause

Additional functions and spin speed a

Individual settings, page 5.

Programmes

Detailed programme overview a page 7 .

The spin speed can be selected on an individual basis, irrespective of which programme is selected and how far through it is.

LF

Cottons Hard-wearing fabrics

Eco Hard-wearing fabrics

1

Mix

Different types of laundry

@

SuperQuick 15’ SuperQuick programme, also suitable as a rinse programme

c

Spin Extra spin with selectable spin speed

>

Empty

:

Wool

“c

Delicate/Silk

Easy-Care the rinsing water for Rinse Stop

(without final spin)

Hand/machine-washable wool

Delicate washable fabrics

Easy-care fabrics

All buttons are sensitive and need only to be touched lightly.

Programme selector for switching the machine on and off and for selecting the programme. Can be turned in either direction.

Select

$

Start/Pause

1

2

1 2

Washing

Detergent drawer with compartments I, II,

~

Washing machine door

Control panel

Washing machine door handle

Service flap

Washing

Switching off

Turn the programme selector to Off .

Turning the tap off

Not required for AquaStop models a Installation instructions, page 7.

Removing the laundry

Open the washing machine door and remove the laundry.

If Rinse Stop (without final spin) is active:

Turn the programme selector to

>

Empty or select spin speed. Select

$

Start/ Pause

– Remove any foreign objects - risk of rusting.

– Leave the washing machine door and detergent drawer open so that any residual water can dry away.

Individual settings ʑ ʑ ʑ

Spin speed (rpm) / Rinse Stop (without final spin)

You can change the spin speed shown or select Rinse Stop (without final spin, laundry remains in the water after the last rinse). The maximum selectable spin speed depends on the model and on which programme is currently selected.

Additional functions

a and overview of programmes, page 7

º

Intensive

Extend the washing time for a more intensive washing of heavily soiled items.

7

Prewash

S

Easy-iron

For heavily soiled items. Prewash at 30 °C.

Special spin sequence with subsequent fluffing. Gentle final spin at reduced speed. Residual moisture in the laundry is increased slightly.

=

Water Plus

$

Start/Pause

Increased water level. Gentler treatment of the laundry.

For starting or interrupting the programme.

Individual settings ʑ

Audible signal

1.

Activate the mode for setting the signal volume

Set to

•

1 step to the right

Press and hold

+

1 step to the right

Release

*

Long signal - function on.

Short signal - function off.

Optional:

Visually-impaired mode* ON-OFF

Direct

ON-OFF

Set to

•

2.

Set the volume for ...

1 step to the right

Button signals

1200

1000

800

400

Rinse

Stop

Information signals

1200

1000

800

400

Rinse

Stop

Setting the volume**

1 step to the right

Setting the volume**

Set to

** you may need to select the function several times.

•

3

End of programme when ...

...

$

Start/Pause flashes and the Ready display lights up.

Cancel the programme

Programmes at high temperatures:

– Cool laundry: Select

@

SuperQuick 15’ .

– Select

$

Start /Pause.

Programmes at lower temperatures:

– Select Spin or

>

Empty .

– Select

$

Start /Pause.

Change the programme, if...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– Select

$

Start /Pause. The new programme starts from the beginning.

Cancel programme

– Select

$

Start/ Pause .

– if required, add laundry (do not leave the washing machine door open for too long as water from the laundry could leak out).

– Select

$

Start /Pause.

3 4 5 6

7

Safety instructions

– Read the Instruction manual and Installation instructions and all other information enclosed with the washing machine and act accordingly.

– Retain the documents for subsequent use.

Risk of electric shock – Never pull on the cable to disconnect the mains plug.

– Only insert/pull out the mains plug with dry hands.

Danger to life For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and remove with the plug.

– Destroy the lock on the washing machine door. This will prevent children from locking themselves in and risking their lives.

Danger of suffocation – Keep packaging, film and packaging parts out of the reach of children.

Risk of poisoning

Risk of explosion

– Keep detergents and care products out of the reach of children.

– Items of laundry pretreated with cleaning agents containing solvents, e.g. stain remover/cleaning solvent may cause an explosion after being loaded into the washing machine.

Rinse items of laundry thoroughly by hand beforehand.

Risk of injury – The washing machine door can become very hot.

– Be careful when emptying hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

Consumption values

Programme Additional function Load

Electricity consumption ***

Water ***

Programme duration ***

LF

Cottons 30 °C**

LF

Cottons 40 °C**

LF

Cottons 60 °C**

º

º

Intensive

Intensive

º

Intensive

Eco 60 °C**

LF

Cottons 90 °C

º

º

Intensive

Intensive c

Easy-Care 40 °C**

º

Intensive c

Easy-Care 40 °C**

(also suitable as a short programme )

“

Delicate/Silk 30 °C

-

:

Wool cold -

:

Wool

ü

30 °C

-

-

8 kg

8 kg

8 kg

8 kg

8 kg

3.5 kg

3.5 kg

2 kg

2 kg

2 kg

0.61 kWh

0.94 kWh

1.65 kWh

1.20 kWh

2.73 kWh

0.55 kWh

0.54 kWh

0.20 kWh

0.08 kWh

0.20 kWh

80 l

80 l

80 l

56 l

97 l

53 l

53 l

39 l

40 l

40 l

2:12 h

2:12 h

2:12 h

3:25 h

2:12 h

1:12 h

0:45 h

0:40 h

0:36 h

0:36 h

* Programme setting for testing and energy labelling in accordance with EU Directive 92/75/EEC.

** Programme setting for testing in accordance with applicable standard EN60456.

Note on comparative tests: When testing the test programmes, wash the specified load using the maximum spin speed.

As a short programme for coloureds, select the Easy-Care 40 °C programme, using maximum spin speed.

***The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.

Important information

Before washing for the first time

Do not put any laundry in the machine. Turn the tap on. Pour into compartment II :

– approx. 1 litre water

– detergent (dosage according to the manufacturer's instructions for light soiling and according to water hardness)

Turn the programme selector to Easy-Care 60 °C and choose

$

At the end of the programme, turn the programme selector to Off .

Start /Pause.

Protecting the laundry and the machine

– When determining the dosage of all washing powders, additives and cleaning agents, you must follow the manufacturer's instructions.

– Empty pockets.

– Look out for metal items (paperclips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Loading items of laundry

Insert items of laundry of varying sizes.

Take care not to trap items of laundry between the washing machine door and the rubber seal.

Laundry with varying degrees of soiling light

Wash new items of clothing separately.

Do not prewash.

Pretreat any stains as necessary. Select

º function as necessary.

Intensive additional heavy Do not load as much laundry. Select the program with Prewash.

Pretreat any stains as necessary. Select

º

Intensive additional function as necessary.

Soaking

Load laundry of the same colour.

Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the programme selector to

LF

Cottons 30 °C and select

$

Start /Pause.

After approx. 10 minutes, press

$

Start/ Pause to pause the programme. Once the required soaking time has elapsed, press

$

Start /Pause again to continue the programme, or select a different programme.

Starching

Laundry must not be treated with fabric softener.

Starching is possible in all wash programmes if liquid starch is used. Pour starch into the fabric softener compartment

~

in accordance with the manufacturer's instructions (rinse first if necessary).

Dyeing/bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel.

Always follow the dye manufacturer's instructions. Do not use the washing machine for bleaching clothes.

9

Insert for liquid detergent

model-dependent

Position the insert for dispensing liquid detergent:

– Remove the detergent drawer completely a page 10 .

– Slide the insert forwards.

Do not use the insert (slide upwards):

– For gel detergents and washing powder

– For programmes with

7

Prewash.

Care

ʑ

– Risk of electric shock.

Disconnect the mains plug.

– Risk of explosion. No solvents.

Machine housing, control panel

– Wipe with a soft, damp cloth.

– Remove detergent and cleaning agent residue immediately.

– Do not clean with a jet of water.

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1.

Pull out, press insert down, remove drawer completely.

2.

To remove the insert: press the insert upwards from below with your finger.

3.

Clean the detergent dispenser tray and insert with water and a brush and dry it.

4.

Fit the insert and engage (connect the cylinder to the guide pin).

5.

Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can evaporate.

ʑ ʑ

Drum

Leave the washing machine door open so that the drum can dry out.

Rust stains - use chlorine-free cleaning agent, not steel wool.

Descaling

Ensure there is no laundry in the machine.

This should not be necessary if the correct detergent dosage has been used. If it is necessary, however, proceed according to the descaling agent manufacturer's instructions. Suitable descalers can be obtained via our website or from our after-sales service ( a page 13 ).

Information on the display panel

depending on model

A signal sounds and indicator lights for the spin speed flash:

¤¤

¤

¤

¤

¤ ¤

¤ ¤

¤¤

¤¤

¤¤

¤ ¤

¤

Close the washing machine door properly; laundry may be caught.

Water in the base tub, appliance leaking.

Call the after-sales service.

¤¤

¤

¤

¤

¤

¤

¤¤

¤¤

¤ ¤

¤ ¤

¤¤

¤

Turn the tap on; supply hose kinked/trapped;

Clean the filter a or page 11

¤¤

¤ ¤

¤ ¤

¤ ¤

¤ or

¤¤

¤¤

¤¤

¤¤

¤

¤ ¤

¤¤

¤¤

¤ ¤

¤

Clean the detergent solution pump , page 11 , waste pipe/drainage hose blocked.

Motor fault.

Call the after-sales service.

Other displays:

Switch off the appliance, wait for 5 seconds and switch it back on.

If the display appears again, call customer services a

Installation instructions page 13.

10

Information about blockages

Risk of scalding

– Allow the detergent solution to cool down.

– Turn off the tap.

Detergent solution pump

Turn the programme selector to Off and disconnect the mains plug.

1.

Open and remove the service flap.

2.

Take the drainage hose out of the retainer.

Remove the sealing cap, allow the detergent solution to flow out.

Push the sealing cap back on.

3.

Unscrew the pump cover carefully (residual water).

4.

Clean the interior, pump cover thread and pump housing (the impeller in the detergent solution pump must be able to rotate).

5.

Replace the pump cover and screw it on tightly. The handle points upright.

Replace the drainage hose in the holder.

6.

Refit the service flap and close it.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 1 litre of water into compartment II and start the

>

Empty programme.

Drainage hose at the siphon

Turn the programme selector to Off and disconnect the mains plug.

1.

Loosen the hose clamp, remove the drainage hose carefully (residual water).

2.

Clean the drainage hose and siphon connecting piece.

3.

Reattach the drainage hose and secure the connection with the hose clamp.

Filter in the water supply

Risk of electric shock

Do not immerse the AquaStop safety device in water (it contains an electric valve).

Reduce the water pressure in the supply hose:

1.

Turn off the tap.

2.

Select any programme (except for Spin/

>

3.

Select

$

Start

Empty).

/Pause. Let the programme run for approximately

40 seconds.

4.

Turn the programme selector to Off . Disconnect the mains plug.

5.

Clean the filter:

Disconnect the hose from the tap.

Clean the filter with a small brush.

and/or for Standard and Aqua-Secure models:

Remove the hose from the rear of the appliance.

Remove the filter with pliers and clean.

6.

Connect the hose and check for leaks.

11

What to do if...

ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ

Water is leaking out.

No water supply.

Detergent not dispensed.

– Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

–

$

Start /Pause not selected?

– Tap not turned on?

– Filter blocked? Clean the filter a page 11.

– Supply hose kinked or trapped?

Washing machine door cannot be opened.

Programme does not start.

– Safety function active. Programme termination? a

page 4 .

– Rinse Stop (without final spin) selected? a page 3,4.

– Can be opened by emergency release only? a page 13.

–

$

Start /Pause time selected?

– Washing machine door closed?

Detergent solution does not empty.

– Rinse Stop (without final spin) selected? a page 3,4.

– Clean the detergent solution pump a

page 11.

– Clean the waste pipe and/or drainage hose.

– Not a fault - water below the visible area.

Water not visible in the drum.

Spin result not satisfactory.

Laundry wet/too damp.

Drum spins gently several times.

Residual water in the

0 compartment for care products.

– No fault - the unbalanced-load detection system interrupted spinning, uneven laundry distribution.

Distribute large and small items of laundry evenly in the drum.

– Easy-iron selected? a page 5.

– Speed selected too low? a page 5 .

– Not a fault - unbalanced-load detection system is adjusting the imbalance.

– Not a fault - the action of the care product is not affected.

– Clean the insert if necessary a

page 10 .

Odour formation in the washing machine.

Wash display lamp flashes. Detergent may be leaking out of the detergent drawer.

– Run programme

LF standard detergent.

Cottons 90 °C without laundry. Use

– Too much detergent used?

Mix 1 tablespoon of fabric softener with ½ litre of water and pour into compartment II (not with outdoor or down fabrics).

– Reduce the detergent dosage for the next wash cycle.

Loud spinning, vibrations and “wandering” during the spin cycle.

– Are the appliance feet fixed?

Secure appliance feet a Installation instructions .

– Transportation safety devices removed?

Remove transportation safety devices a

Installation instructions .

– Clean detergent-solution pump a page 10.

Noises during spin and drain cycles.

Indicator lamps do not function during operation.

Programme Status longer than usual.

There are detergent residues on the laundry.

– Power cut?

– Circuit breakers tripped or fuses blown? Reset the circuit breakers or change the fuses.

– If the fault occurs repeatedly, call the after-sales service.

– Not a fault - unbalanced-load detection system is adjusting the imbalance by repeatedly redistributing the laundry.

– Not a fault - foam detection system active - adds an additional rinse cycle.

– Occasionally, phosphate-free detergents contain water-insoluble residues.

– Select

@

SuperQuick 15’ or brush the laundry after washing.

12

What to do if ...

ʑ

In pause mode,

$

Start/Pause flashes very quickly and a signal sounds.

– Water level too high. Not possible to add more laundry. Close the washing machine door immediately if necessary.

– To continue, press the

$

Start /Pause button.

If you cannot correct a fault yourself (switching on/off) or a repair is required:

– Turn the programme selector to Off and remove the mains plug from the socket.

– Turn off the water supply and call the after-sales service a page 13.

Emergency release

e.g. in the event of a power cut

The programme continues when the power supply is restored. However, if the laundry has to be removed, the washing machine door can be opened as follows:

Risk of scalding

The detergent solution and laundry may be hot. If possible, leave to cool down.

Do not reach into the drum if it is still turning.

Do not open the washing machine door if you can see water through the glass.

1.

Turn the programme selector to Off and disconnect the mains plug.

2.

Drain the detergent solution a

page 10.

3.

Pull the emergency release downwards with a tool and release.

Washing machine door can then be opened.

After-sales service

ʑ ʑ

If you cannot remedy the fault yourself (What to do if ..., a page 12, 13 ), contact our aftersales service. We will always find a suitable solution to avoid unnecessary visits by repair personnel.

– You will find the contact data for your closest after-sales service in the after-sales service directory (depending on model).

ʑ ʑ

– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply).

–

IE

01450 2655

Please give the after-sales service the product number (E no.) and the production number

(FD) of the appliance.

This information can be found: on the inside of the washing machine door*/ opened service flap* and rear of the appliance.

*depending on model

Product number Production number

Trust the manufacturer's competence.

Turn to us.

You will thereby ensure that the repairs are performed by trained service personnel equipped with original repair parts.

13

Washing machine

Instruction manual

Observe the safety instructions on page 8.

Read these instructions and the separate installation instructions before operating the washing machine.

en

Your washing machine

Congratulations

ä

you have opted for a modern, high-quality domestic appliance manufactured by Bosch. This washing machine is distinguished by its economical water and energy consumption.

Each machine that leaves our factory is inspected thoroughly to ensure that it functions properly and is in perfect condition.

For more information on our products, accessories, replacement parts and services, see our website www.bosch-home.com

or contact our after-sales service centres.

Contents

Page ʋ Intended use ...................................................................................... 1 ʋ

Programmes ...................................................................................... 1 ʋ Setting and adjusting the programme .......................................... 3 ʋ Washing .......................................................................................... 3/4 ʋ

After washing ..................................................................................... 4 ʋ Individual settings ......................................................................... 5/6 ʋ Overview of programmes ................................................................ 7 ʋ

Safety instructions ............................................................................. 8 ʋ Consumption values ......................................................................... 8 ʋ Important information ....................................................................... 9 ʋ

Insert for liquid detergent .............................................................. 10 ʋ Care ................................................................................................... 10 ʋ Information on the display panel ................................................. 10 ʋ

Instructions for blockages ............................................................. 11 ʋ What to do if...................................................................................... 12 ʋ Emergency release .......................................................................... 13 ʋ

After-sales service............................................................................ 13

Protection of the environment/Conservation tips

– Always fill the washing machine with a maximum amount of laundry for the relevant programme.

– Wash normally soiled laundry without a prewash.

– Instead of

LF

Cottons 90 °C , select Eco 60 °C and the

º

Intensive additional function. Comparable cleaning result with significantly lower energy consumption. Measure the detergent according to the manufacturer's instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select the appropriate spin speed according to the instructions of the dryer manufacturer

.

Intended use

ʋ

For domestic use only ʋ

For machine-washable fabrics and hand-washable wool in detergent solution ʋ To be operated with cold drinking water and commercially available detergents and care products which are suitable for use in washing machines

– Do not leave children unattended near the washing machine.

– The washing machine is not to be used by children or persons not familiar with the operating instructions.

– Keep pets away from the washing machine.

Preparation

Correct installation according to the separate Installation instructions.

Check the machine

– Never use a damaged machine.

– Inform the after-sales service.

Connect the mains plug

– Make sure your hands are dry.

– Take hold of the plug only.

Turn the tap on

Insert for liquid detergent (depending on model), page 10 .

Compartment II : detergent for main wash,

water softener, bleach, stain remover

Compartment

~

: fabric softener, starch

Compartment I : Detergent for prewash

Am

Pou

Programmes

Detailed programme overview a page 7 .

The spin speed can be selected on an individual basis, irrespective of which programme is selected and how far through it is.

LF

Cottons Hard-wearing fabrics

Eco Hard-wearing fabrics

1

Mix

Different types of laundry

@

SuperQuick 15’ SuperQuick programme, also suitable as a rinse programme

c

Spin Extra spin with selectable spin speed

>

Empty the rinsing water for

Rinse Stop

(without final spin)

:

Wool

“c

Delicate/Silk

Hand/machine-washable wool

Delicate washable fabrics

Easy-Care Easy-care fabrics

Additional functions

Spin speed

Status indicators

All buttons are sensitive and need only to be touched lightly.

Programme sele

Programme s switching the off and for se programme. C either directio

1 2 a

$ a a a

~ a

$

> ʑ ʑ

º

7

S ʑ

=

$ a

$

$

$

$

$

$

>

@ ʑ

ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ

º

LF

ä ʋ ʋ ʋ

LF

1

@

c

>

:

“c a

~

Before washing for the first time

Run a wash cycle without any laundry a

page 9

Sorting and loading the laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load a page 7 .

Observe the important information a page 9.

Insert items of laundry of varying sizes.

Close the washing machine door. Take care not to trap items of laundry between the washing machine door and the rubber seal.

Adding detergent and care products

Measure accordingly:

Amount of laundry, level of soiling, water hardness (ask your water supply company) and manufacturer's instructions.

Models without insert for liquid detergent:

Pour liquid detergent into the appropriate dispenser and place in the drum.

During operation: Open the detergent drawer with care.

Dilute thick fabric softener and care products with water.

This prevents blockages.

me selector

Set and adjust the programme

Start/

Pause

Additional functions and spin speed a Individual settings, page 5.

1

Select

$

Start/Pause

2 me selector for g the machine on and for selecting the me. Can be turned in irection.

Washing

Detergent drawer with compartments I, II,

~

Washing machine door

Control panel

Washing machine door handle

Switching off

Turn the programme selector to Off .

Turning the tap off

Not required for AquaStop models a

Installation instructions, page 7.

Removing the laundry

Open the washing machine door and remove the laundry.

If Rinse Stop (without final spin) is active:

Turn the programme selector to

>

Empty or select spin speed. Select

$

Start/ Pause

– Remove any foreign objects - risk of rusting.

– Leave the washing machine door and detergent drawer open so that any residual water can dry away.

ʑ ʑ

º

7

S ʑ

=

$

3

Service flap

Washing

3

End of programme when ...

...

$ up.

Start/Pause flashes and the Ready display lights

Cancel the programme

Programmes at high temperatures:

– Cool laundry: Select

@

– Select

$

Start /Pause.

SuperQuick 15’

.

Programmes at lower temperatures:

– Select

Spin or

>

Empty

.

– Select

$

Start /Pause.

Change the programme, if...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– Select

$

Start

/Pause. The new programme starts from the beginning.

Cancel programme

– Select

$

Start/ Pause .

– if required, add laundry (do not leave the washing machine door open for too long as water from the laundry could leak out).

– Select

$

Start /Pause.

4 a ʑ

ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ

º

LF

ä ʋ ʋ ʋ

LF

1

@

c

>

:

“c a

~ a

$ a a a

~ a

$

>

Individual settings ʑ ʑ ʑ

Spin speed (rpm) / Rinse Stop (without final spin)

You can change the spin speed shown or select Rinse Stop (without final spin, laundry remains in the water after the last rinse). The maximum selectable spin speed depends on the model and on which programme is currently selected.

Additional functions

a

and overview of programmes, page 7

º

Intensive

Extend the washing time for a more intensive washing of heavily soiled items.

7

Prewash

S

Easy-iron

For heavily soiled items. Prewash at 30 °C.

Special spin sequence with subsequent fluffing. Gentle final spin at reduced speed. Residual moisture in the laundry is increased slightly.

=

Water Plus

$

Start/Pause

Increased water level. Gentler treatment of the laundry.

For starting or interrupting the programme.

Individual settings ʑ

Audible signal

1.

Activate the mode for setting the signal volume

Set to

• 1 step to the right

Press and hold

+

1 step to the right

Release

* Long signal - function on.

Short signal - function off.

Optional:

Visually-impaired mode* ON-OFF

Direct

ON-OFF

Set to

•

2.

Set the volume for ...

1 step to the right

Button signals

1200

1000

800

400

Rinse

Stop

Information signals

1200

1000

800

400

Rinse

Stop

Setting the volume**

1 step to the right

Setting the volume**

Set to

** you may need to select the function several times.

•

$

$

$

$

$

$

>

@

5 6

ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ

º

LF

ä ʋ ʋ ʋ

LF

1

@

c

>

:

“c a

~ a

$ a a a

~ a

$

> ʑ ʑ

º

7

S ʑ

=

$ a

$

$

$

$

$

$

>

@ ʑ

7

Safety instructions

– Read the Instruction manual and Installation instructions and all other information enclosed with the washing machine and act accordingly.

– Retain the documents for subsequent use.

Risk of electric shock – Never pull on the cable to disconnect the mains plug.

– Only insert/pull out the mains plug with dry hands.

Danger to life For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and remove with the plug.

– Destroy the lock on the washing machine door. This will prevent children from locking themselves in and risking their lives.

Danger of suffocation

– Keep packaging, film and packaging parts out of the reach of children.

Risk of poisoning

Risk of explosion

– Keep detergents and care products out of the reach of children.

– Items of laundry pretreated with cleaning agents containing solvents, e.g. stain remover/cleaning solvent may cause an explosion after being loaded into the washing machine.

Rinse items of laundry thoroughly by hand beforehand.

Risk of injury – The washing machine door can become very hot.

– Be careful when emptying hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

Consumption values

Programme Additional function Load

Electricity consumption

***

Water ***

Programme duration

***

LF

Cottons 30 °C**

LF

Cottons 40 °C**

LF

Cottons 60 °C**

º

º

º

Intensive

Intensive

Intensive

Eco 60 °C**

LF

Cottons 90 °C

º

Intensive

º

Intensive c

Easy-Care 40 °C**

º

Intensive c

Easy-Care 40 °C**

(also suitable as a short programme )

-

8 kg

8 kg

8 kg

8 kg

8 kg

3.5 kg

3.5 kg

0.61 kWh

0.94 kWh

1.65 kWh

1.20 kWh

2.73 kWh

0.55 kWh

0.54 kWh

80 l

80 l

80 l

56 l

97 l

53 l

53 l

2:12 h

2:12 h

2:12 h

3:25 h

2:12 h

1:12 h

0:45 h

“

Delicate/Silk 30 °C -

:

Wool cold

:

Wool

ü

30 °C

-

-

2 kg

2 kg

2 kg

0.20 kWh

0.08 kWh

0.20 kWh

39 l

40 l

40 l

0:40 h

0:36 h

0:36 h

* Programme setting for testing and energy labelling in accordance with EU Directive 92/75/EEC.

** Programme setting for testing in accordance with applicable standard EN60456.

Note on comparative tests: When testing the test programmes, wash the specified load using the maximum spin speed.

As a short programme for coloureds, select the Easy-Care 40 °C programme, using maximum spin speed.

***The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.

Important information

Before washing for the first time

Do not put any laundry in the machine. Turn the tap on. Pour into compartment II :

– approx. 1 litre water

– detergent (dosage according to the manufacturer's instructions for light soiling and according to water hardness)

Turn the programme selector to Easy-Care 60 °C and choose

$

Start /Pause.

At the end of the programme, turn the programme selector to Off .

Protecting the laundry and the machine

– When determining the dosage of all washing powders, additives and cleaning agents, you must follow the manufacturer's instructions.

– Empty pockets.

– Look out for metal items (paperclips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Loading items of laundry

Insert items of laundry of varying sizes.

Take care not to trap items of laundry between the washing machine door and the rubber seal.

Laundry with varying degrees of soiling

Wash new items of clothing separately.

light heavy

Do not prewash.

Pretreat any stains as necessary. Select

º

Intensive additional function as necessary.

Do not load as much laundry. Select the program with Prewash.

Pretreat any stains as necessary. Select

º

Intensive additional function as necessary.

Soaking

Load laundry of the same colour.

Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the programme selector to

After approx. 10 minutes, press

$

Start/ Pause to pause the programme. Once the required soaking time has elapsed, press

$

Start

LF

Cottons 30 °C and select

$

Start /Pause.

/Pause again to continue the programme, or select a different programme.

Starching

Laundry must not be treated with fabric softener.

Starching is possible in all wash programmes if liquid starch is used. Pour starch into the fabric softener compartment

~

in accordance with the manufacturer's instructions (rinse first if necessary).

Dyeing/bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel.

Always follow the dye manufacturer's instructions. Do not use the washing machine for bleaching clothes.

ʑ ʑ ʑ

9

7 a a a a

$

>

> ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ

$

0

$

$ a a a a a a a a a

LF a a a ʑ ʑ ʑ ʑ

@ a

$ a a

LF

LF

LF

LF c c

“

:

:

ü

º

º

º

º

º

º

$

~

$

$

LF

º

º

$

Insert for liquid detergent

model-dependent

Position the insert for dispensing liquid detergent:

– Remove the detergent drawer completely a page 10 .

– Slide the insert forwards.

Do not use the insert (slide upwards):

– For gel detergents and washing powder

– For programmes with

7

Prewash.

Care

ʑ

– Risk of electric shock.

Disconnect the mains plug.

– Risk of explosion. No solvents.

Machine housing, control panel

– Wipe with a soft, damp cloth.

– Remove detergent and cleaning agent residue immediately.

– Do not clean with a jet of water.

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1.

Pull out, press insert down, remove drawer completely.

2.

To remove the insert: press the insert upwards from below with your finger.

3.

Clean the detergent dispenser tray and insert with water and a brush and dry it.

4.

Fit the insert and engage (connect the cylinder to the guide pin).

5.

Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can evaporate.

ʑ ʑ

Drum

Leave the washing machine door open so that the drum can dry out.

Rust stains - use chlorine-free cleaning agent, not steel wool.

Descaling

Ensure there is no laundry in the machine.

This should not be necessary if the correct detergent dosage has been used. If it is necessary, however, proceed according to the descaling agent manufacturer's instructions. Suitable descalers can be obtained via our website or from our after-sales service ( a

page 13 ).

Information on the display panel

depending on model

A signal sounds and indicator lights for the spin speed flash:

¤¤

¤ ¤

¤ ¤

¤ ¤

¤

Close the washing machine door properly; laundry may be caught.

¤¤

¤ ¤

¤ ¤

¤¤

¤

Turn the tap on; supply hose kinked/trapped;

Clean the filter a page 11

¤ ¤

¤¤

¤¤

¤ ¤

¤

Clean the detergent solution pump , page 11 , waste pipe/drainage hose blocked.

¤¤

¤¤

¤¤

¤ ¤

¤

Water in the base tub, appliance leaking.

Call the after-sales service.

¤¤

¤

¤

¤¤

¤

¤

¤ or

¤¤

¤

¤

¤

¤

¤

¤

¤ or

¤¤

¤¤

¤¤

¤¤

¤

Motor fault.

Call the after-sales service.

Other displays:

Switch off the appliance, wait for 5 seconds and switch it back on.

If the display appears again, call customer services a Installation instructions page 13.

10

Information about blockages

Risk of scalding

– Allow the detergent solution to cool down.

– Turn off the tap.

Detergent solution pump

Turn the programme selector to Off and disconnect the mains plug.

1.

Open and remove the service flap.

2.

Take the drainage hose out of the retainer.

Remove the sealing cap, allow the detergent solution to flow out.

Push the sealing cap back on.

3.

Unscrew the pump cover carefully (residual water).

4.

Clean the interior, pump cover thread and pump housing (the impeller in the detergent solution pump must be able to rotate).

5.

Replace the pump cover and screw it on tightly. The handle points upright.

Replace the drainage hose in the holder.

6.

Refit the service flap and close it.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 1 litre of water into compartment II and start the

>

Empty programme.

Drainage hose at the siphon

Turn the programme selector to Off and disconnect the mains plug.

1.

Loosen the hose clamp, remove the drainage hose carefully (residual water).

2.

Clean the drainage hose and siphon connecting piece.

3.

Reattach the drainage hose and secure the connection with the hose clamp.

Filter in the water supply

Risk of electric shock

Do not immerse the AquaStop safety device in water (it contains an electric valve).

Reduce the water pressure in the supply hose:

1.

Turn off the tap.

2.

Select any programme (except for Spin/

>

Empty).

3.

Select

$

Start /Pause. Let the programme run for approximately

40 seconds.

4.

Turn the programme selector to Off . Disconnect the mains plug.

5.

Clean the filter:

Disconnect the hose from the tap.

Clean the filter with a small brush.

and/or for Standard and Aqua-Secure models:

Remove the hose from the rear of the appliance.

Remove the filter with pliers and clean.

6.

Connect the hose and check for leaks.

11 ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ

$

0

$

$ a a a a a a a a a

LF a a a ʑ ʑ ʑ ʑ

@ a

$ a a

LF

LF

LF

LF c c

“

:

:

ü

º

º

º

º

º

º

$ ʑ

~

$

$

LF

º

º

$ ʑ ʑ

7 a a a a

$

>

>

What to do if...

ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ

Water is leaking out.

No water supply.

Detergent not dispensed.

– Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

–

$

Start /Pause not selected?

– Tap not turned on?

– Filter blocked? Clean the filter a

page 11.

– Supply hose kinked or trapped?

Washing machine door cannot be opened.

Programme does not start.

– Safety function active. Programme termination? a page 4 .

– Rinse Stop (without final spin) selected? a page 3,4.

– Can be opened by emergency release only? a page 13.

–

$

Start /Pause time selected?

– Washing machine door closed?

Detergent solution does not empty.

– Rinse Stop (without final spin) selected? a page 3,4.

– Clean the detergent solution pump a page 11.

– Clean the waste pipe and/or drainage hose.

– Not a fault - water below the visible area.

Water not visible in the drum.

Spin result not satisfactory.

Laundry wet/too damp.

Drum spins gently several times.

Residual water in the

0 compartment for care products.

Odour formation in the washing machine.

Wash display lamp flashes. Detergent may be leaking out of the detergent drawer.

– No fault - the unbalanced-load detection system interrupted spinning, uneven laundry distribution.

Distribute large and small items of laundry evenly in the drum.

– Easy-iron selected? a page 5.

– Speed selected too low? a

page 5 .

– Not a fault - unbalanced-load detection system is adjusting the imbalance.

– Not a fault - the action of the care product is not affected.

– Clean the insert if necessary a page 10 .

– Run programme

LF

Cottons 90 °C without laundry. Use standard detergent.

– Too much detergent used?

Mix 1 tablespoon of fabric softener with ½ litre of water and pour into compartment II (not with outdoor or down fabrics).

– Reduce the detergent dosage for the next wash cycle.

Loud spinning, vibrations and “wandering” during the spin cycle.

– Are the appliance feet fixed?

Secure appliance feet a

Installation instructions .

– Transportation safety devices removed?

Remove transportation safety devices a Installation instructions .

– Clean detergent-solution pump a page 10.

Noises during spin and drain cycles.

Indicator lamps do not function during operation.

Programme Status longer than usual.

There are detergent residues on the laundry.

– Power cut?

– Circuit breakers tripped or fuses blown? Reset the circuit breakers or change the fuses.

– If the fault occurs repeatedly, call the after-sales service.

– Not a fault - unbalanced-load detection system is adjusting the imbalance by repeatedly redistributing the laundry.

– Not a fault - foam detection system active - adds an additional rinse cycle.

– Occasionally, phosphate-free detergents contain water-insoluble residues.

– Select

@

SuperQuick 15’ or brush the laundry after washing.

12

What to do if ...

ʑ

In pause mode,

$

Start/Pause flashes very quickly and a signal sounds.

– Water level too high. Not possible to add more laundry. Close the washing machine door immediately if necessary.

– To continue, press the

$

Start /Pause button.

If you cannot correct a fault yourself (switching on/off) or a repair is required:

– Turn the programme selector to Off and remove the mains plug from the socket.

– Turn off the water supply and call the after-sales service a page 13.

Emergency release

e.g. in the event of a power cut

The programme continues when the power supply is restored. However, if the laundry has to be removed, the washing machine door can be opened as follows:

Risk of scalding

The detergent solution and laundry may be hot. If possible, leave to cool down.

Do not reach into the drum if it is still turning.

Do not open the washing machine door if you can see water through the glass.

1.

Turn the programme selector to Off and disconnect the mains plug.

2.

Drain the detergent solution a page 10.

3.

Pull the emergency release downwards with a tool and release.

Washing machine door can then be opened.

After-sales service

ʑ ʑ

If you cannot remedy the fault yourself (What to do if ..., a page 12, 13 ), contact our aftersales service. We will always find a suitable solution to avoid unnecessary visits by repair personnel.

– You will find the contact data for your closest after-sales service in the after-sales service directory (depending on model).

ʑ ʑ

– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.

A call set-up fee of up to 6 pence may apply).

– IE 01450 2655

Please give the after-sales service the product number (E no.) and the production number

(FD) of the appliance.

Product number Production number

This information can be found: on the inside of the washing machine door*/ opened service flap* and rear of the appliance.

*depending on model

Trust the manufacturer's competence.

Turn to us.

You will thereby ensure that the repairs are performed by trained service personnel equipped with original repair parts.

13

LF

LF

LF

LF c c

“

:

:

ü

º

º

º

º

º

º

$ ʑ

~

$

$

LF

º

º

$ ʑ ʑ

7 a a a a

$

>

> ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ

$

0

$

$ a a a a a a a a a

LF a a a ʑ ʑ ʑ ʑ

@ a

$ a a

Washing machine

Instruction manual en

Observe the safety instructions on page 8.

Read these instructions and the separate installation instructions before operating the washing machine.