Bosch Washing machine HomeProfessional Instruction manual
advertisement
Washing machine
WAY28790GC
en
Instruction Manual and Installation Instructions
2
Your new washing machine
You have chosen a Bosch washing machine.
Please take a few minutes to read and become familiar with the advantages of your washing machine.
To meet the high quality demands required by Bosch, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
For more information on our products, accessories, replacement parts and services, see our website www.bosch-home.com or contact our after-sales service centres.
If the operating and installation instructions describe different models, any differences will be pointed out at the relevant points in the text.
Read these operating and installation instructions before switching on the washing machine.
Display rules
m
Warning!
This combination of symbol and signal word indicates a possibly dangerous situation. Not heeding the warning can cause death or injuries.
m
Caution!
This signal word indicates a possibly dangerous situation. Not heeding the caution can cause property and/or environmental damage.
²
Information about the optimum use of the appliance/any other useful information.
1. 2. 3. / a) b) c)
The steps are represented by numbers or letters.
Ø
/ -
Lists are represented by a small box or a dash.
Contents
Before washing
Ø
Intended use
Ø
Ø
Protection of the environment
Ø
The main points in brief
Ø
Getting to know your appliance
Ø
Ø
Operating elements/Display elements
Operating the appliance
Ø
Before each washing
Ø
Washing
Ø
After washing
Ø
Programme overview
Ø
Programme settings/options
Ø
Automatic stain treatment
Ø
Ø
Appliance settings
Ø
Sensors – Your washing machine is so intelligent
Cleaning and maintenance
Ø
Ø
Emergency release
Ø
Information on the display panel
Ø
Faults, what to do?
Ø
Customer service
Installing the appliance
Ø
Ø
Ø
Remove transportation protection devices
Ø
Connecting the water
Ø
Alignment
Ø
Electrical connection
Ø
Before the 1st washing
Ø
Transportation, e.g. if moving house
Index
56
3
4
Intended use
Ø
For use in the household only.
Ø
The washing machine is suitable for washing machinewashable textiles and hand-washable wool in wash liquor.
Ø
The washing machine is suitable to be operated with cold drinking water and commercially available detergents and care products which are suitable for use in washing machines.
Ø
When dosing all detergents, cleaning aids, cleaning products and cleaning agents, always follow the manufacturer's instructions.
Ø
The washing machine may be operated by children from 8 years of age, by persons who have limited physical, sensory or mental abilities and by persons who have inadequate experience or knowledge, provided they
are supervised
or
have been instructed
by a responsible person.
Ø
Keep pets away from the washing machine!
Read and follow the operating and installation instructions and all other information enclosed with the washing machine.
Retain documents for subsequent use.
Safety instructions
m
Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
– Never pull out the mains plug by tugging the power cord.
– Insert/pull out the mains plug with dry hands only.
m
Warning!
Risk to children!
– Do not leave children unsupervised near the washing machine.
– Children must not play with the washing machine.
– This will prevent children from locking themselves in and suffocating.
On redundant appliances:
– Pull out the mains plug!
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washing-machine door.
– Children must not perform any cleaning or maintenance work without supervision.
– When playing, children may become entangled in the packaging/film and packaging parts or pull them over their heads and suffocate.
Keep packaging, plastic film and packaging parts out of the reach of children.
– When washing at high temperatures, the glass of the washing machine door becomes hot.
Prevent children from touching the hot washing machine door.
– Detergents and care products may cause intoxication if consumed or eye and skin irritation if touched.
Keep detergents and care products out of the reach of children.
m
Warning!
Risk of explosion!
Items of washing pretreated with solvent detergents, e.g. stain remover/petroleum ether, may cause an explosion when the washing machine has been loaded.
Before hand thoroughly rinse items of washing by hand.
5
m
Caution!
Danger of scalding!
When washing at high temperatures, you may be scalded if you touch the hot wash liquor (e.g. if draining hot wash liquor into a washbasin or if draining the washing machine in an emergency).
Allow detergent solution to cool down.
m
Caution!
Risk of damaging appliance!
–
Cover plate may break!
Do not climb on the washing machine.
–
Opened washing machine door may break off or washing machine may overturn!
Do not lean on the open washing machine door.
m
Caution!
Danger when reaching into/gripping the rotating drum!
If you reach into the rotating drum, you may injure your hands.
Do not grip the rotating drum. Wait until the drum stops rotating.
m
Caution!
Risk of coming into contact with liquid detergents/care products!
If the detergent drawer is opened while the washing machine is running, detergent/care product may spray out.
Caution when opening the detergent drawer.
In case of eye/skin contact, rinse thoroughly.
If accidentally swallowed, seek medical advice.
6
Protection of the environment
Packaging/Old appliance
)
Dispose of packaging in an environmentally friendly manner.
This appliance is labelled in accordance with European Directive
2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Hints and tips
Ø
Utilise the maximum amount of washing for the particular programme.
Ø
Wash normally soiled washing without Pre-wash.
Ø
Energy saving mode:
The display panel light goes out after several minutes,
Start/Reload
light, select any button.
A
flashes. To activate the
The energy-saving mode is not activated if a programme is running.
Ø
The selectable temperatures apply to the care labels on the textiles. The temperatures in the machine may deviate from this so that you get the optimum mix of energy-saving and washing results.
Ø
Automatic switch off:
If the appliance is not operated for a prolonged period, it automatically switches off before the programme starts and when the programme has ended to save energy. Switch on by pressing main switch
#
button.
Ø
If the washing is then dried in the tumble dryer, select spin speed according to the instructions of the dryer manufacturer.
7
1
The main points in brief
@ @ @
2
Insert mains plug.
Turn the tap on.
@
Open the washing machine door.
To switch on, press the # button.
@
Dosage: 30%
Please load laundry: max. 8kg
Select the programme, e.g.
Cottons
.
¼
3
Sort the washing.
@
Insert the washing.
Dosage: 70%
Do not exceed maximum load.
@
¼
Please load laundry: max. 8kg
FODFN
4
Open the detergent drawer.
Dose detergent according to dosing recommendation.
@
Close the washing machine door.
8
5
If required, change programme settings of the selected programme and select programme settings/options.
@ v
Finished, remove washing
@
Select
Start
/Reload
A
.
End of the programme For switching the machine on, press the # button.
Turn off the mains supply (for models without Aqua-Stop).
Getting to know your appliance
'HWHUJHQWGUDZHU
2SHUDWLQJ
HOHPHQWV
'LVSOD\
HOHPHQWV
'UXPOLJKW
GHSHQGLQJ
RQPRGHO
'RRU
6HUYLFHIODS
2SHQLQJ
FODFN
DQGFORVLQJWKHGRRU 6HUYLFHIODS
9
Detergent drawer
Dispenser
I
Dispenser
Insert
A
Detergent for prewash i
Softener, starch. Do not exceed the maximum load.
Dispenser
II
Detergent for main wash, water softener, bleach, stain remover for dosing liquid detergent (not for all models)
For models with insert for liquid detergent:
The detergent drawer features an insert which is used as a dosing aid for liquid detergent.
²
Do not use insert:
– For gel-like detergents and washing powders.
– For programmes with Prewash or
Finished in
3 option.
Position insert for dosing liquid detergent:
Completely remove detergent drawer.
Push insert forwards.
For models without insert for liquid detergent:
Dose liquid detergent according to the manufacturer’s instructions.
10
Operating elements/Display elements
P
Q
T
L M
O N
S R
²
All buttons are sensitive, they only need to be touched gently.
i Switch on and off the appliance. Press the # main switch button.
j Select a programme. Rotating the in either direction is possible.
Programme
Overview, refer to
Change programme settings of the selected programme and select programme options: k Select
Temperature
s ,
Spin Speed
0
,
Finished in
3 buttons and change.
l
Select
Eco
Perfect
¦
or
Speed
Perfect
(
m Select
Anti-Stain System
x button for stain selection.
Overview of all stains
n Select
Options
² button for additional programme options.
Overview of all options
o Start wash programme.
Start
/Reload A reload washing).
button to start, interrupt and cancel the programme (e.g. p Change appliance settings. Select
basic settings 3 sec.
buttons for appliance settings (end signal, button signal, language, autom. switch off) for approx. 3 seconds. See Overview of all
q
Display panel for settings and information.
11
Before each washing
²
–
Install and connect
washing machine
properly
.
Refer to
– Before the 1st wash, wash once
without
any washing.
1. Preparing the washing
Sorting the washing according to:
Ø
Type of fabric/fibre.
Ø
Colour.
Ø
Soiling.
Ø
Follow manufacturer’s care information.
Ø
Care label specifications:
< ;
Cottons 95 °C, 90 °C
: 9 8
Coloureds 60 °C, 40 °C, 30 °C
B A >
Easy-Care 60 °C, 40 °C, 30 °C
A
K
L >
Delicates 40 °C, 30 °C
W
>
A
K
L
Hand and machine-washable silk and woollens cold, 40 °C,
30 °C
Ž
Do not wash laundry in the washing machine.
Protecting the washing and the machine:
²
– When dosing all detergents, cleaning aids, cleaning products and cleaning agents, always follow the manufacturer's instructions.
– Keep detergents and agents for the pretreatment of washing
(e.g. stain remover, prewash sprays, ...) away from the surfaces of the washing machine. Using a damp cloth, immediately remove any fine spray residue and other residue/droplets.
– Empty pockets.
– Remove metal parts (paper clips, etc.).
– Wash delicates in the net/bag (tights, underwired bras).
– Close zips, button up covers.
– Brush sand out of pockets and collars.
– Remove curtain fittings or include in the net/bag.
– Wash new items separately.
12
2. Preparing the appliance
Insert mains plug.
Turn on water tap.
3. Selecting a programme and puting the washing in the drum
1.
Open the washing machine door.
2.
Check whether the drum has been completely emptied. If required, empty. Otherwise, the load display may malfunction.
3.
Press the # button. The appliance is switched on.
The Bosch logo is indicated on the display panel and all programme indicator lamps are lit.
Then always the
Cottons
programme preset at the factory is displayed.
Displays for the
Cottons
programme:
×
60
°C
×
1400
0
×
2:31 h
˜
Ö Ö Ö
– The indicator lamp is lit on the programme selector and the main menu for the selected programme is indicated on the display panel.
– For appliances with
drum light
:
13
14
4.
After switching on the appliance, after opening and closing the washing machine door as well as after starting the programme, the drum is lit. The light goes out automatically.
Select a programme.
You can use the saved programme
or
select another programme,
Programme overview, refer to
,
or
select other programmes (see
Additional programs
programmes) and choose one programme as follows: other programmes selected using
Additional programs
and choose e.g.
Towels
:
60 °C
1200
Additional programms
0
2:15h
Down
Towels
Rinse/
Freshen Up
Ö
Â
Main menu
×
– Select programme using the buttons under the arrows.
The selection is acknowledged by a tick.
– Wait or back by pressing
Main menu
button, selected programme is indicated on the display panel.
5.
× × ×
˜
60
°C
1200
0
2:15 h
Ö Ö Ö
Towels
™
– To change the programme, select button under the black highlighted programme and change programme.
Insert the washing.
Dosage: 30%
Please load laundry: max. 8kg
¼
The load screen for the selected programme (e.g. for Cottons) is indicated on the display panel. The load screen is indicated when the door is opened or when the amount of washing is changed.
²
– Unfold and load presorted items of washing. Mix large and small items. Washing items of different size distribute themselves better during the spin cycle. Individual items of
– Do not load washing until the main menu for the saved programme is displayed after the Bosch logo.
– The load bar progresses as the washing machine is loaded. If the max. load is exceeded, the bar flashes. Do not exceed indicated max. load. Overfilling reduces the washing result and encourages creasing.
4. Add detergent and care product
1.
2.
Pull out the detergent drawer.
Dosing in dispenser according to:
– Dosing recommendation on the display panel, e.g. for
Cottons
:
Dosage: 70%
Please load laundry: max. 8kg
¼
Depending on the amount of washing in the washing machine, a dosing recommendation is indicated on the display panel.
– Soiling.
– Water hardness (ask your water supply company).
– Manufacturer’s instructions.
²
– When dosing all detergents, cleaning aids, cleaning products and cleaning agents, always follow the manufacturer's instructions.
– Dilute viscous fabric softener and fabric conditioner with water.
Prevents blockage of the overflow!
5. Changing the settings of the selected programme
²
Take care not to trap any items of clothing between the loading door and rubber seal.
Close the door.
FODFN
× × ×
˜
60
°C
1400
0
2:31 h
Ö Ö Ö
The main menu for the selected programme is indicated again on the display panel.
15
16
You can use the displayed presettings or adjust the selected programme optimally to the items of washing by changing the presettings or selecting additional settings/options.
Ø
Select Temperature, Spin Speed, Finished in.
Refer to
:
Selecting and changing e.g. the
Temperature
s
:
×
70
60
°C
50
Ö
×
1400
0
×
2:31 h
˜
Ö Ö
The arrows on the display panel indicate which buttons are used to change the settings. The settings are active without acknowledgement and are displayed in the main menu.
²
– If the buttons are held down, the set values automatically run through.
– The respective programme duration is displayed by selecting the programme. The programme duration is adjusted while the programme is running if the programme duration requires changing, e.g. due to changes in the programme settings/ options, foam detection, unbalanced load detection, the load or soiling.
Ø
Eco
Perfect
¦
:
Energy-optimised washing by reducing the temperature while achieving a consistent washing result.
²
The washing temperature is lower than the selected temperature. For special hygiene requirements, the
Allergy Plus
programme is recommended.
Ø
Speed
Perfect
(
: for a shorter wash time with a comparable washing effect to the standard programme. Observe maximum load.
When selected, the display lamp is lit.
Ø
Anti-Stain System
x
.
Overview of all stains
Do not let stains dry. Remove solid substances beforehand.
Arrange items of washing as usual and load washing machine. and load washing machine. Select the programme.
Select a stain type (depending on the selected programme).
Select
Anti-Stain System
x
button and select e.g.
·
grass
:
60°C x
Stains
1400
0
2:31h
Soil and sand
·
grass
coffee
Ö
·
Â
Main menu
×
– Select/deselect stain using displayed buttons. Stain option is immediately active and is indicated on the display panel.
– Wait or back by pressing
Main menu
or
Anti-Stain System
x
button.
Ø
Options
²
.
Overview of all options
Select
Options
² and e.g.
Z
Water Plus
buttons:
60°C
Extra rinse
Z
Water Plus
Rinse Hold
Ö
1400
0
2:31h
Z
Â
× Ö ×
– Select option by pressing the two buttons displayed on the left.
– Select/deselect option by pressing the two buttons displayed on the right. The selected options are immediately active.
In the case of multi-level settings keep touching the buttons to run through the settings automatically.
– Wait or back to the main menu by pressing
Options
button.
²
6. Starting the programme
Ø
Select
Start
/Reload
A
. The indicator light is on.
17
Washing
During the wash cycle the programme progress is indicated by a bar on the display panel. The bar progresses in the course of the wash cycle and provides information about the current programme progress.
The arrows are switched on and off according to the programme progress. They indicate the programme settings/options which can be changed/added as the programme progresses.
Some programme sequence steps explained:
Ø
Load adjust active
×
60°C
Load adjust active
×
1400
0
2:31h
˜
Z
Ö Ö
Ø
Prewash, wash, rinse, spin, drain
... are displayed during the wash cycle.
Ø
Extra rinse: foam
Ø
During washing
Ø
Childlock
To prevent the set functions of the washing machine from being accidentally changed, the childproof lock can be activated.
Activate/deactivate: press
Finished in
5 seconds.
3 for approx.
E
Childlock has been activated
Display panel goes back to the Main menu after approx.
3 seconds.
If the programme selector is adjusted or a button is selected while the childproof lock is active, the briefly.
E
symbol flashes
18
Ø
Topping up washing
When the programme has started, washing can be reloaded or taken out as required.
Select Start/
Reload
A
.
× ×
˜
60°C
Pause:
Ö
1400
0
Reload is possible
Ö
2:31h
²
– If there is a high water level, high temperature or if the drum is rotating, the washing machine door remains locked for reasons of safety and reload is not possible. Follow the information on the display panel. To continue the programme, select the
Start
/Reload
A
button. The washing machine door is locked and the programme continues automatically.
– Load display is not active during relosding.
– Do not leave washing machine door open for a prolonged period – water could run out of the washing.
Ø
Changing the programme sequence
if you have mistakenly started a wrong programme:
1. Select Start/
Reload
A
.
2. Select another programme.
3. Select
Start
/Reload the beginning.
A
. The new programme starts from
Ø
Cancelling the programme
For programmes at high temperature:
1. Select Start/
Reload
A
.
2. Cool down washing: select
Rinse/Freshen Up
(see
Additional programms
j
programmes).
3. Select
Start
/Reload
A
.
For programmes at low temperature:
1. Select Start/
Reload
A
.
2. Select
Spin
or
Drain
(see
Additional programms
j
programmes).
3. Select
Start
/Reload
A
.
19
Ø
End of programme by Rinse Hold
Rinse hold reached:
Select "spin" or "drain" and then "start".
Spin Drain
Ö Ö
1. Select
Spin
(If required, adjust the spin speed) or
Drain
.
2. Select
Start
/Reload
A
.
End of the programme
Finished, remove washing
is indicated on the display panel.
Ä
Finished, remove washing
If
Foam has been detected
is also indicated on the display panel, the washing machine has detected too much foam during the wash programme and therefore automatically activates additional rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load.
20
After washing
1.
Open washing machine door and remove washing..
¼
#
Remove the washing.
Switch off the device.
²
– Do not leave any items of washing in the drum. In the next wash they may shrink or discolour something else.
– Remove any foreign objects from the drum and the rubber seal – risk of rust.
– Leave detergent drawer and door open so that residual water can evaporate.
Before switching the machine off:
²
– Always remove the washing. Otherwise, the load display may malfunction.
– Always wait until the programme ends, as the appliance could still be locked. Then switch the appliance on and wait for the unlocking device.
2.
Press the
#
button. Appliance is switched off.
3.
Turn off the water tap.
Not required for Aqua-Stop models.
21
22
Programme overview
Õ
Programme/Type of washing
Name of the programme
Brief explanation of the programme and for which textiles it is suitable.
Cottons
Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
²
.
option
Speed
Perfect
(
Easy-Care
Textiles made of synthetic materials or blended fabrics.
Mix
Mixed load consisting of textiles made of cotton and synthetics.
Delicate/Silk
For delicate, washable textiles, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. silk blouses, silk scarf).
²
.
suitable for delicates and/or silk.
The presettings of the programmes are highlighted in
bold
.
Options/information
max. load selectable temperature as °C selectable spin speeds in rpm, the max. spin speed depends on the model possible programme options for the Less Ironing programme option possible spin speeds in rpm
max.
8
kg/5 kg * cold –
60
– 90 °C
0 ...
1400
... 1600 rpm
¦
,
G
, x , T , p ,
Ï
, Z ,
$
,
Á at p
: 0 ...
800
rpm max. 4 kg cold –
40
– 60 °C
0 ...
1200
rpm
¦
,
G
, x , T , p ,
Ï
, Z ,
$
,
Á at p : 0 ...
600
...800 rpm max. 4 kg cold –
40
°C
0 ...
1400
... 1600 rpm
¦
,
G
, x
,
T
, p
,
Ï
,
Z
,
$
,
Á at p : 0 ...
600
... 800 rpm max. 2 kg cold –
30
– 40 °C
0 ...
600
... 800 rpm
¦
,
G
, x
,
T
, p
,
Ï
,
Z
,
$
,
Á at p
: 0 ...
600
rpm
Programme/Type of washing
W
Wool
Hand or machine-washable wool or richwool textiles.
Especially gentle wash programme to prevent shrinkage, longer programme pauses (textiles rest in wash liquor).
²
.
Wool is of animal origin, e.g.: angora, alpaca, lama, sheep.
²
.
For machine wash use detergent suitable for wool.
Allergy Plus
Hard-wearing textiles made of cotton or linen.
²
.
Especially suitable for increased hygienic demands or particularly sensitive skin on account of prolonged washing at a defined temperature, with a higher water level and longer rinsing cycle.
²
.
* reduced load for
Speed
Perfect
( option
Memory 1 and 2
To save frequently used individual programme settings.
Saving
The presettings of the programmes are highlighted in
bold
.
Options/information
max. 2 kg cold –
30
– 40 °C
0 ...
800
rpm
$
,
Á max.
7,5
kg/5 kg * cold –
60
°C
0 ...
1200
... 1600 rpm
¦
,
G
, x
,
T
, p
,
Ï
,
Z
,
$
,
Á at p : 0 ...
800
rpm
Settings as selected programme
Dark Wash
Dark textiles made of cotton and dark easy-care textiles.
Wash textiles inside out.
Super Quick 15'
Extra short programme approx.
15 minutes, suitable for lightly soiled washing as a small amounts of laundry.
max. 3,5 kg cold –
30
– 40 °C
0 ...
800
... 1200 rpm
¦
,
G
, x , T , p ,
Ï
, Z ,
$
,
Á at p
: 0 ...
600
... 800 rpm max. 2 kg cold –
30
– 40 °C
0 ...
800
... 1200 rpm
$
,
Á
23
24
Ø
Programme/Type of washing
Sportwear
Textiles made of microfibres for sport and leisure time.
²
.
fabric softener.
²
.
softener residue from detergent drawer
(all dispensers).
Duvet
machine-washable textiles, pillows, quilts or bedspreads filled with synthetic fibres;
²
.
Depending on the textile, use standard or mild detergent - please observe care labels. Measure detergent sparingly.
Shirts/Blouses
Non-iron shirts/Blouses made of cotton, linen, synthetics fibres or blended fabrics.
For the blouses are given a short spin only, hang up dripping wet. effect.
p
Less Ironing
~
option, shirts/
Self-smoothing
²
.
delicates/silk in Delicates/silk programme.
The presettings of the programmes are highlighted in
bold
.
Options/information
max. 2 kg cold –
30
– 40 °C
0 ...
800
rpm
¦
,
G
, x
,
T
, p
,
Ï
,
Z
,
$
,
Á at p
: 0 ...
600
... 800 rpm max. 2.5 kg cold –
40
– 90 °C
0 ...
1000
... 1200 rpm
¦
,
G
, x , T ,
Ï
, Z ,
$ max. 2 kg cold –
40
– 60 °C
0 ...
800
rpm
¦
,
G
, x
,
T
, p
,
Ï
,
Z
,
$
,
Á at p
: 0 ...
400
rpm
see Additional programs
Programme/Type of washing
Down
Machine-washable textiles filled with down, pillows, blankets or duvets.
²
Wash large items individually. Use mild detergent. Meter detergent sparingly.
The presettings of the programmes are highlighted in
bold
.
Options/information
max. 2 kg cold -
40
- 60 °C
0 ...
1200
rpm
¦
,
G
, x ,
Ï
, Z ,
$
Towels
Hard-wearing, heat-resistant towels made of cotton.
especially soft towels max. 3,5 kg cold -
60
– 90 °C
0 ...
1200
... 1600 rpm
¦
,
G
, x
,
T
, p
,
Ï
,
Z
,
$
,
Á at p
: 0 ...
800
rpm
Rinse
Extra rinse with spin.
Spin
Extra spin with selectable spin speed.
Spin/Low program
Extra spin cycle at reduced speed and with especially gentle spin mechanism.
Drain
the rinsing water when Rinse stop final spin) is actuated.
$
(without
-
-
0 ...
1200
... 1600 rpm p ,
Ï
, Z ,
$
,
Á
at p : 0 ...
800
rpm
-
0 ...
1200
... 1600 rpm p
,
Á
at p : 0 ...
800
rpm
-
0 ...
800
... 1200 rpm
-
-
-
p
,
Á at p
: 0 ...
600
rpm
25
Memory 1 and 2
The programme and all settings are permanently stored under
Memory 1
and
Memory 2
.
Saving:
1.
2.
Select
Memory 1
or
2
programme.
If a programme has not yet been selected for this memory programme, select programme according to the instructions on the display panel. The selection of the programme is automatically acknowledged by a tick.
3.
If required, change temperature, spin speed and Finished in time in the main menu and/or select programme options.
The programme is automatically saved and displayed:
× × ×
˜
T
$
40
°C
1400
0
1:19 h
Ö Ö Ö
Mixed Fabric
™
The saved programme can be changed by pressing the button under the programme for as long as the arrow is displayed.
Starching
²
The washing should not be treated with fabric softener.
Liquid starch can be used in all wash programmes. Pour starch into the dispenser
M
according to manufacturer’s specifications
(if required clean beforehand).
Dyeing/Discolouring
Dye in household quantities only. Salt may attack stainless steel!Observe specifications of the dye manufacturer! Do not discolourwashing in the washing machine!
Soaking
Pour soaking agent/detergent into dispenser
II
according to the manufacturer’s instructions. Set programme selector to
Cottons 30 °C
and select
Start
/Reload
10 minutes select Start/
Reload
time, reselect
Start
/Reload continued or changed.
A
A
A
. After approx.
. After the required soaking
, if the programme is to be
²
Insert washing of the same colour. No additional detergent is required, the soaking solution is used for washing.
26
Programme settings/options
Buttons
Depending on the programme, you can use the programme options to adjust the washing process even more efficiently to your items of washing.
²
– Are active without acknowledgement.
– Not retained after appliance is switched off.
– Can be selected or deselected or changed depending on the programme progress.
Temperature
Spin Speed
Notes
Before and during the programme the presettings can be changed for as long as the arrows are displayed.
Maximum spin speed depends on the programme and model.
Finished in
Eco
Perfect
¦
Delays the Finished in time (end of programme).
Before the programme starts, the end of the programme can be preselected in h steps up to maximum 24h.
When the programme has started, the preselected time is displayed e.g. for 8h and counts down until the wash programme starts.
Then the programme duration is displayed, e.g. 2:30h.
When the programme has started, the preselected time can be changed as follows:
1. Select Start/
Reload
A
A
.
.
2. Select
Finished in
button and change Ready in time.
3. Select
Start
/Reload
For saving energy.
Speed
Perfect
(
For a shorter wash time.
Anti-Stain System
x
For washing stained laundry.
27
Press Options button to select: Notes
Pre-wash
on – off
For heavily soiled washing.
Pour detergent into dispensers
I
and
II
.
Less Ironing
on – off
Rinse Plus
ö
+ 1 Rinse
÷
+ 2 Rinses
ø
+ 3 Rinses
Water Plus
on – off
Reduces creasing by special spin sequence followed by fluffing and reduced spin speed.
²
.
Residual moisture of the washing slightly increased.
Additional rinse cycles depending on the programme, prolonged programme duration.
²
.
Recommended application: for particularly sensitive skin or/and in areas with very soft water.
Increased water level, more gentle treatment of the washing.
Rinse Hold
on – off
Silent Wash
on – off
The washing remains in the water after the last rinse
Reduced noise values by special wash and spin cycle and deactivated end signal. Especially suitable for washing at night.
²
.
Residual moisture of the washing slightly increased.
28
Automatic stain treatment
General information about stains
A total of 16 different stains can be selected. The washing machine adjusts the washing temperature, drum movement and soaking time specific to the type of stain. Hot or cold water, gentle or intensive washing control and long or short soaking provide the wash programme with a special sequence for each type of stain. The result: stains are treated optimally.
The treatment of two stains explained in the following example
¶
blood
Ç
egg
Blood is first “dissolved” in cold water, then the selected wash programme starts.
Egg particles are removed by soaking in the lukewarm water bath, selecting a wash cycle with a high water level and running additional rinse cycles.
For the other stains we have developed comparable solutions in intensive studies.
Selectable treatment of stains
•
baby food
¶
blood
Ç
egg
Ì
strawberry
¸
soil + sand
·
grass
À
coffee
È
cosmetics
Í
orange
º
red wine
»
chocolate y
sweat
É
dirty socks
Ê
grease + oil
Ë
tea
¹
tomatoes
29
Consumption values
Programme Load
Cottons 20 °C
Cottons 40 °C
8 kg
8 kg
Cottons 60 °C
Cottons 90 °C
Easy-Care 40 °C
Mix 40 °C
8 kg
8 kg
4 kg
4 kg
Delicate/Silk 30 °C 2 kg
Wool 30 °C 2 kg
Energy consumption **
0,25 kWh
1,09 kWh
1,43 kWh
2,40 kWh
0,65 kWh
0,59 kWh
0,15 kWh
0,19 kWh
Water **
57 l
57 l
57 l
69 l
46 l
44 l
34 l
39 l
Programme duration **
2
^
h
2
_
h
2 _ h
2 ^ h
2 h
1 ] h
_
h
_
h
Programme Additonal function
Load
Cottons 40/60 °C
Eco
Perfect
¦
*
8/4 kg
Annual energy consumption
89 kWh
Annual water consumption
10500 l
* Programme setting for testing and energy labelling according to directive 2010/30/EU with cold water (15 °C).
** The values may deviate from the stated values depending on water pressure and hardness, room temperature, type and amount of laundry, detergents used, fluctuations in the mains voltage and selected additional functions.
30
Appliance settings
By pressing the
basic settings 3 sec.
buttons, appliance settings can be changed, e.g. button signal.
Simultaneously hold down
basic settings 3 sec.
buttons for approx. 3 seconds: language end signal button signal
Ö × off
Ö
Â
×
Ø
If the buttons are held down, the settings automatically run through.
Ø
Select Setting with the two left buttons.
Ø
Select displayed value with the two right buttons (selection acknowledged by a tick).
Ø
Wait or hold down
basic settings 3 sec.
buttons again.
²
Settings are retained after appliance is switched off.
Settings end signal
Set values
off – quiet – medium – loud – very loud
button signal
off – quiet – medium – loud – very loud
Auto poweroff of the appliance
in 15 – 30 – 60 min – never
language
German
English
...
Notes
Adjust volume of the end signal.
Adjust volume of the button signals.
The appliance automatically switches off after ... min. (= 0 kWh energy consumption); to switch on, press main switch button
Change displayed language.
#
.
31
Sensors – Your washing machine is so intelligent
Load adjust
Depending on the type of textile and load, the load adjust optimally adjusts the water consumption in each programme.
Aqua-Sensor
depending on model
During the rinse cycle the Aqua sensor checks the degree of turbidity (turbidity is caused by dirt and detergent residue) of the rinsing water. The duration and the number of rinse cycles depend on the turbidity of the water.
Load sensor/Load display
The load sensor detects the load level in the washing machine when the door is open. This is indicated by a progressing bar on the display panel.
²
To ensure that the load sensor measures all the laundry, the drum must be empty before the washing machine is switched on.
Dosing recommendation
The dosing recommendation indicates a recommended detergent dosage as a %, depending on the selected programme and the detected load. The indicated % refers to the recommendation of the detergent manufacturer.
²
By observing the recommended dosage, you will protect the environment and reduce your household costs.
Unbalanced load detection system
The automatic unbalanced load detection system spins the laundry several times to ensure even distribution.
For reasons of safety the speed is reduced or does not perform a spin cycle if the washing is very unevenly distributed.
²
Distribute small and large items of washing in the drum.
Faults, what to do?
32
Care and maintenance
m
Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
Switch off the appliance. Pull out the mains plug!
m
Caution!
Fire and explosion hazard!
If solvent cleaning agents, e.g. petroleum ether, are used in the washing machine, components may be damaged and toxic fumes generated.
Do not use solvent-based cleaning agents.
m
Caution!
Washing machine may be damaged!
If solvent cleaning agents, e.g. petroleum ether, are used on the washing machine, the surfaces may be damaged.
Do not use solvent-based cleaning agents.
Machine housing/Control panel
Ø
Remove detergent residue immediately.
Ø
Wipe with a soft, damp cloth.
Ø
Do not clean the appliance with a water jet.
Drum
Use chlorine-free cleaning agent, not steel wool.
If there is an odour in the washing machine, run
Cottons 90 °C
programme. Use standard detergent.
Descaling
Not required if detergent dosed correctly. However, if this does occur, follow the instructions of the descaling agent manufacturer. Suitable descalers can be purchased on our website or from customer service.
maintenance
33
Cleaning the detergent drawer
If it contains detergent or fabric softener residue:
1.
Pull out, depress insert, take out drawer all the way.
2.
3.
4.
Take out insert: using your finger, press insert upwards.
Clean detergent dispenser and insert with water and a brush and dry.
Attach insert and lock into position (push cylinder onto guide pin).
Insert detergent drawer.
5.
² Leave detergent drawer open so that residual water can evaporate.
Drain pump blocked
m
Warning!
Danger of scalding!
Wash liquor is hot when washing at high temperatures.
You may be scalded if you touch the hot wash liquor.
Allow wash liquor to cool down.
²
Turn the tap off to prevent more water from flowing in and to ensure that it is drained via the pump.
1.
2.
Switch off the device. Pull out the mains plug.
Open service flap.
3.
Remove service flap.
34
4.
Take the drainage hose out of the holder. Remove the sealing cap, drain water into a suitable receptacle.
Press on sealing cap and insert drainage hose into the holder.
Note:
Residual water may run out.
5.
Carefully unscrew the pump cover. Clean the interior, pump cover thread and pump housing (fan impeller in the detergent-solution pump must rotate).
6.
Reinsert and screw on pump cover. Handle should be vertical.
7.
Insert service flap (1), engage (2) and close (3).
²
To prevent unused detergent from flowing into the outlet during the next wash cycle: Pour approx. 1 litre of water into dispenser
II
and start the
Drain
programme.
Drainage hose on the siphon blocked
1.
Switch off the appliance. Pull out the mains plug!
Note:
Residual water may run out!
2.
Loosen hose clip, carefully remove drainage hose.
3.
4.
Clean drainage hose and siphon spigot.
Re-attach drainage hose and secure connection point with hose clip.
35
Filter blocked in water inlet hose
First, release water pressure in the supply hose:
1.
Turn off the tap!
2.
Select any programme (except Spin/Drain).
3.
Select
Start
/Reload seconds.
A
. Leave programme for approx. 40
4.
5.
Press the
# mains plug!
button. Appliance is switched off. Pull out the
Clean the filter:
Disconnect the hose from the water tap.
Clean filter with small brush.
and/or for standard and Aqua-Secure models:
Remove hose from the rear of the appliance.
6.
Take out filter with pliers and clean.
Connect the hose and check for leaks.
36
Emergency release
The programme continues running when the power supply is restored. If the washing is still to be removed, the door can be opened as described below: m
Warning!
Danger of scalding!
Wash liquor and washing may be hot. If touched, there is a risk of scalding.
If required, leave to cool down.
m
Caution!
Danger when reaching into/gripping the rotating drum!
If you reach into the rotating drum, you may injure your hands.
Do not grip the rotating drum. Wait until the drum stops rotating.
m
Caution!
Water damage possible!
Leaking water may cause damage.
Do not open the door if you can still see water through the glass.
1.
2.
3.
Switch off the appliance. Pull out the mains plug!
Drain the water.
Pull down emergency release with a tool and release.
Door can then be opened.
37
Information on the display panel
Display
The door cannot be locked, please open the door again, then close it and select
"start/pause".
Please open tap
Cause/Remedy
– Washing may be caught. Please open and close washing machine door again and select
Start
/Reload A .
– If required, shut washing machine door or remove washing and shut again.
– If required, switch appliance off and on again; set programme and make individual settings; start programme.
– Turn on tap fully.
– Supply hose kinked/jammed.
– Water pressure too low. Clean the filter.
Please clean pump – Drain pump blocked. Clean the drain pump.
– The water drainage pipe/drain hose is blocked. Clean the
Pause: Reload is not possible
Water level or temperature is too high.
Select
Start
/Reload A to continue the programme.
Door cannot be unlocked: Water level or temperature is too high
Water level or temperature is too high.
Select
Start
/Reload
A
to continue the programme.
aquaStop has been activated!
Please call customer service
Auto power-off in ... seconds, not applicable without Aqua-Stop
Water in the base pan, appliance leaking.
Water cooling
Other displays
Error E: XXX
Appliance automatically switches off after ... seconds if it is not operated for a prolonged period. In order to cancel the
To protect the wastewater pipes, the hot detergent solution is cooled before being drained.
Switch off appliance, wait 5 seconds and switch on again. If the
display is indicated again, call customer service.
38
Faults, what to do?
Faults
Water not flowing in.
Detergent not washed in.
Cause/Remedy
Water is running out. – Correctly attach/replace drainage hose.
– Tighten screw-fitting on the supply hose.
–
Start
/Reload
– Tap not open?
A
not selected?
– Filter blocked? Clean the filter.
– Supply hose kinked or jammed?
Washing-machine door cannot be opened.
Programme does not start.
Detergent solution is not drained.
– Safety function active. Stop programme?
–
Rinse Hold
$
(without final spin) selected?
– Can be opened via emergency release only?
–
Start
/Reload
– Door closed?
A
or
Finished in
time selected?
– Childlock active? Deactivate.
–
Rinse Hold
$
(without final spin) selected?
– Clean the drain pump.
– Clean outlet pipe and/or drainage hose.
Water not visible in the drum.
Spin result not satisfactory.
Washing wet/too damp.
Not a fault – water below the visible area.
– Not a fault – unbalanced load detection system has stopped the spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
–
Less Ironing
p selected?
– Too low speed selected?
Not a fault – unbalanced load detection system adjusts imbalance.
Spin cycle actuated several times.
Residual water in the dispenser for care product.
Odour formation in the washing machine.
Loud noise formation, vibrations and “wandering” during spin cycle.
– Not a fault – effect of the care product not impaired.
Run
Cottons 90 °C
programme without washing.
Use standard detergent.
– Appliance aligned?
Align the appliance.
– Appliance feet fixed?
Secure appliance feet.
– Transportation safety devices removed?
Remove transportation protection devices.
39
Faults
Display panel/ indicator lights do not function while the appliance is running.
The programme takes longer than usual.
Cause/Remedy
– Power failure?
– Fuse tripped? Switch on/replace fuse.
– If the fault occurs repeatedly, call customer service.
– Not a fault – unbalanced load detection system adjusts imbalance by repeatedly distributing the washing.
– Not a fault – foam detection system active – several rinse cycles are switched on.
Detergent residue on the washing.
In the pause status
Start/Reload
A flashes very quickly and a signal sounds.
– Occasionally phosphate-free detergents contain water-insoluble residue.
– Select
Rinsing
or brush the laundry after washing.
– Water level too high. Washing cannot be reloaded. Immediately close washing machine door.
– Select
Start
/Reload A to continue the programme.
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
– Switch off the appliance and pull out the mains plug.
– Turn off the tap and call customer service.
40
Customer service
If you cannot rectify the fault yourself,
Faults, what to do?
, please contact our customer service. We will
always finds a suitable solution to avoid unnecessary visits by technicians.
Please give customer service the product number (E-Nr.) and the production number (FD) of the appliance.
(1U
Product number
)'
Production number
These instructions can be found on: inside of washing machine door */ open service flap * and rear of the appliance.
* depending on model
Rely on the competence of the manufacturer.
Contact us. You can therefore be sure that the repair is carried out by trained service technicians who carry original spare parts.
41
42
Standard accessories
$TXD6WRS
GHSHQGLQJRQPRGHO
6WDQGDUG$TXD6HFXUH
0DLQVFDEOH
:DWHURXWOHW
:DWHULQOHW
,QVWUXFWLRQPDQXDODQG
,QVWDOODWLRQLQVWUXFWLRQV
&RYHUV
(OERZ
IRUVHFXULQJWKH
ZDWHURXWOHWKRVH
6SDQQHU
Also required for connection of the water drainage hose to a siphon:
1 hose clip Ø 24–40 mm (DIY store) is also required for connection to a siphon.
Connecting the water
Useful tools:
Ø
Spirit level for alignment.
Ø
Socket wrench size 13: for loosening the transportation protection devices
and size 17: for aligning the appliance feet.
Hose and cable lengths
&RQQHFWLRQRQOHIWVLGH
GHSHQGLQJRQPRGHO
RU
&RQQHFWLRQRQULJKWVLGH aFP aFP aFP aFPaFP aFP aFPaFP
PD[
FP
²
If the hose holders are used, the possible hose lengths are reduced!
Available from dealer/customer service:
Ø Extension for Aqua-Stop or cold water inlet hose
(approx. 2.50 m).
Order no. WMZ2380, WZ10130, CZ11350, Z7070X0
Ø Longer supply hose (approx. 2.20 m), for standard model.
Technical specifications
Dimensions
(width x depth x height)
Weight
Mains connection
Water pressure
60 x 59 x 85 cm
depending on modell:
63–83 kg
Nominal voltage 220–240 V, 50 Hz
Nominal current 10 A
Nominal power 2300 W
100–1000 kPa (1–10 bar)
43
Installation
²
Humidity in the drum is caused by the final inspection.
Secure installation
m
Warning!
Risk of injury!
– The washing machine is heavy – caution: take care when lifting it.
– If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and cause injuries.
Donot lift the washing machine by its projecting parts.
m
Caution!
Risk of stumbling!
If the hoses and power cord are installed improperly, there is a risk of tripping and injury.
Lay hoses and cables in such a way that there is no risk of stumbling.
m
Caution!
Washing machine may be damaged!
– Frozen hoses may tear/burst.
Do not install the washing machine in an area where there is a risk of frost or outdoors.
– If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and the washing machine may be damaged.
Donot lift the washing machine by its projecting parts.
²
– In addition to the safety information listed here, the local water and electricity supplier may have special requirements.
– If in doubt, have the appliance connected by a technician.
44
m
Warning!
Risk of injury!
– The washing machine is heavy – caution: take care when lifting it.
– If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and cause injuries.
Do not lift the washing machine by its projecting parts.
m
Caution!
Risk of stumbling!
If the hoses and power cord are installed incorrectly, there is a risk of tripping and injury.
Lay hoses and cables in such a way that there is no risk of stumbling.
m
Caution!
Washing machine may be damaged!
– Frozen hoses may tear/burst.
Do not install the washing machine in an area where there is a risk of frost or outdoors.
– If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and the washing machine may be damaged.
Do not lift the washing machine by its projecting parts.
²
– In addition to the safety information listed here, the local water and electricity supplier may have special requirements.
– If in doubt, have the appliance connected by a technician.
Installation area
²
Stability is important to prevent the washing machine from wandering!
– The installation area must be firm and level.
– Soft floors/floor coverings are not suitable.
Installation on a platform with drawer
Platform: order no. WMZ 20490, WZ- 20490
45
Installing the appliance on a base or on a wooden joist ceiling
m
Warning!
Washing machine may be damaged!!
The washing machine may wander during the spin cycle and topple/fall off the base.
Always secure the washing machine feet with fixing brackets.
Holding brackets: order no. WMZ 2200, WX 9756,
CZ 110600, Z 7080X0
²
If installing on a wooden joist ceiling:
– If possible, install the washing machine in a corner.
– Screw a water-resistant wooden panel (min. 30 mm thick) to the floor.
Appliance installed under/between kitchen units
m
Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
The appliance cover plate must not be removed.
²
– 60 cm cavity width required.
– Install washing machine only under a continuous worktop connected firmly to the adjacent cupboards.
46
Remove transportation protection devices
m
Caution!
Washing machine may be damaged!
Transit bolts which have not been removed may damage e.g. the drum while the washing machine is running.
Before using the appliance for the first time, remove the 4 transportation protection devices completely and keep in a safe place.
m
Caution!
Washing machine may be damaged!
To prevent damage in transit when transporting the washing machine subsequently, always re-install the transit bolts prior to transportation.
Keep screw and sleeve screwed together.
1.
Take the hoses out of the holders.
2.
Take hoses out of the elbow and remove elbow.
47
48
3.
Loosen and remove all 4 transportation lock screws.
4.
Take the power cord out of the holders. Remove sleeves.
5.
Insert covers.
²
Lock covers firmly by pressing on the locking hook.
Connecting the water
m
Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
Do not immerse Aqua-Stop safety device in water
(contains an electric valve).
²
– To prevent leakage or water damage, follow the instructions in this chapter!
– Operate the washing machine with cold drinking water only.
– Do not connect to the mixer tap of an unpressurised hotwater apparatus.
– Use only the supplied inlet hose or one purchased from an authorised specialist outlet, not a used one!
– If in doubt, have the appliance connected by a technician.
Water inlet hose
²
Water inlet hose: do not kink, crush, modify or sever (strength is no longer guaranteed).
Optimum water pressure in the mains: 100–1000 kPa
(1–10 bar)
Ø
When the tap is turned on, the water flow is at least 8 l/min.
Ø
If the water pressure is higher, install a pressure reducing valve.
1.
Connect the water supply hose.
m
Warning!
Threads for screw connections may be damaged!
If the screw connections are tightened too tightly using a tool (pliers), the threads may be damaged.
Tighten plastic screw-fittings by hand only.
to the tap (¾" = 26.4 mm):
PLQPP
PD[ PD[
Aqua-Stop and Aqua-Secure Standard
49
on the appliance:
for Standard and Aqua-Secure models
2.
Carefully turn on the tap and check that the connection points are not leaking.
²
Screw connection is under water pipe pressure.
Water drainage hose
²
– Do not kink or protract the the water supply hose.
– Height difference between the placement area and drainage point: 0–maximum 100 cm
Drainage into a wash basin
m
Warning!
Water damage possible!
If the attached drainage hose slips out of the washbasin due to high water pressure when draining the washing machine, leaking water may cause damage.
Secure the drainage hose to prevent it from slipping out of the sink.
m
Caution!
The appliance may be damaged.
If the end of the drainage hose is immersed in the drained water, water may be drawn back into the appliance!
– The plug must not be in the plug hole.
– When the water is being pumped out of the washing machine, check that the water drains away quickly enough.
– The end of the drainage hose must not be immersed in the drained water!
Installing the drainage hose:
50
Drainage into a siphon
m
Warning!
Water damage possible!
If the drainage hose slips off the siphon connection due to high water pressure when draining the washing machine, leaking water may cause damage.
Connection point must be secured with hose clip,
Ø 24–40 mm (specialist outlet).
Connecting
Drainage into a plastic pipe with rubber sleeve or into a gully:
m
Warning!
Water damage possible!
If the drainage hose slips off the plastic pipe due to high water pressure when draining the washing machine, leaking water may cause damage.
Secure the drainage hose to prevent it from slipping out of the sink.
Connecting
51
52
Alignment
1.
Loosen lock nut in a clockwise direction with a wrench.
2.
Check alignment of the washing machine with a spirit level and, if required, correct. Adjust the height by rotating the foot.
² All four feet must be firmly on the floor.
The washing machine must not wobble!
3.
Tighten the lock nut against the housing.
Grip the foot and do not adjust the height.
²
– The lock nuts on all four appliance feet must be screwed tightly against the housing!
– Loud noise formation, intense vibrations and “wandering” may be due to incorrect alignment!
Electrical connection
Electrical safety
m
Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
– Never pull out the mains plug by tugging the power cord.
– Insert/pull out the mains plug with dry hands only.
– Never pull out the mains plug during operation.
– Connect the washing machine to an alternating current via a correctly installed earthed socket only.
– The mains voltage and voltage specifications on the washing machine (appliance rating plate) must match.
– Connected load as well as required fuse are indicated on the appliance rating plate.
Ensure that:
– Mains plug and socket match fit.
– Cable cross-section is adequate.
– Earthing system has been installed correctly.
– A damaged power cord may be replaced by an electrician only. A replacement mains cable can be obtained from customer service.
– Do not use multiple plugs/couplings or extension cables.
– If a residual-current-operated circuit breaker is used, use only a type which features this symbol: z
.
Only this symbol guarantees compliance with currently valid regulations.
– The mains plug must be accessible at all times.
53
54
Before the 1st washing
The washing machine was inspected thoroughly before leaving the factory. To remove any water left over from testing procedures, the first washing cycle should be carried out
without
laundry in the machine.
²
The washing machine must have been installed and connected properly. See chapter
1.
Check the machine.
²
Never switch on a damaged machine. Inform your customer
2.
3.
Remove protective film from the fascia.
Insert mains plug.
4.
5.
Turn the tap on.
Switch on the appliance.
6.
7.
8.
9.
Close the washing machine door. Do not load any washing.
Select the
Cottons
programme.
Select the temperature
90 °C
.
Open the detergent drawer.
10.
11.
Pour approx. 1 litre of water (1¾ pt) into dispenser
II
.
Add standard detergent to dispenser
II
according to manufacturer’s instructions for light soiling.
²
To prevent frothing, use only half the recommended amount of detergent. Do not use any standard or mild detergents.
12.
Close the detergent drawer.
13.
14.
Select
Start
/Reload
A
.
When the programme ends, switch off the appliance.
Your washing machine is now ready for use.
Transportation, e.g. if moving house
Preparatory work
1.
2.
3.
4.
5.
Turn off the tap.
Release the water pressure in the supply hose.
Maintenance – Filter in the water inlet hose
Drain any residual detergent solution.
Maintenance – Drain pump blocked
Isolate the washing machine from the power supply.
Remove the hoses.
Installing transportation protection devices
1.
Remove covers and keep in a safe place.
2.
If required, use a screwdriver.
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the bolts.
Before switching on the appliance:
²
–
Remove
the transportation protection devices!
– To prevent unused detergent from flowing into the outlet during the next wash: Pour 1 litre of water into dispenser
II
and start the
Drain
programme.
55
E
F
I
G
H
Index
A
B
C
D
L
Machine housing/Control
Cleaning
Getting to know your
Information on the display
Insert the washing, 13, 14, 15
Installing transportation
56
M
O
P
Q
R
S
T
U
W
Programme
Changing the
Terminating the
Quick-reference instructions, 8
Programme sequence
Protection of the
Select
Sorting
Unbalanced load detection
57
Aqua-Stop warranty
For appliances with Aqua-Stop only
In addition to warranty claims against the seller based on the contract of sale and in addition to our appliance warranty we shall pay damages under the following conditions:
1.
If water damage is caused by a fault in our water safety system, we shall make reparation for the damage with respect to private users.
2.
The liability warranty applies to the service life of the appliance.
3.
A claim can only be made under the warranty if the appliance and Aqua-Stop have been correctly installed and connected according to our instructions; this also includes a correctly installed Aqua-Stop extension (original accessory).
4.
Our guarantee does not apply to defective cables/hoses or to fittings up to the connection on the tap.
5.
Appliances which feature Aqua-Stop can be left unattended during operation and it is not necessary to turn off the tap afterwards.
6.
The tap should only be turned off if you are away for a prolonged period, e.g. several weeks holiday.
Robert Bosch, Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
DEUTSCHLAND
*9000975498*
9000975498 (9404)
advertisement
Related manuals
advertisement